I need help please, because I can't get my new prestigio 4500T turn on.
I first did the CWM recovery in this site, androidforum.cz/pro-pap4500t-dc-1-2ghz-s-jb-4-1-1-t38976.html
and it was all ok.
But then I wanted to remove the CWM recovery of my phone, because I had some problem updating my phone to the new rom because of it,
and I went to the same program I installed CWM recovery, Smart Phone Flash Tool, and I put the same scatter file I used to install, and instead of clicking on download I clicked Format, and then format whole flash, because it was there that I would take CWM recovery of my phone.
Now I can't turn my phone on, when I connect usb at pc, it connects and disconnects a lot of times. I even tried to do the same steps to download the CWM recovery on my phone but in SP Flash Tool I get this error: BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
[HINT]: Please check your load matches to your target which is to be downloaded.
I don't know what to do and please Help me. Thanks
Nobody answers? Please can anybody help me?
ddqgarces said:
I need help please, because I can't get my new prestigio 4500T turn on.
I first did the CWM recovery in this site, androidforum.cz/pro-pap4500t-dc-1-2ghz-s-jb-4-1-1-t38976.html
and it was all ok.
But then I wanted to remove the CWM recovery of my phone, because I had some problem updating my phone to the new rom because of it,
and I went to the same program I installed CWM recovery, Smart Phone Flash Tool, and I put the same scatter file I used to install, and instead of clicking on download I clicked Format, and then format whole flash, because it was there that I would take CWM recovery of my phone.
Now I can't turn my phone on, when I connect usb at pc, it connects and disconnects a lot of times. I even tried to do the same steps to download the CWM recovery on my phone but in SP Flash Tool I get this error: BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
[HINT]: Please check your load matches to your target which is to be downloaded.
I don't know what to do and please Help me. Thanks
Click to expand...
Click to collapse
You messed up boot file.Try to find original boot.img here on XDA and try to flash it via PC,or find original stock rom for flashing via SPFlashTool try that
jaskooo said:
You messed up boot file.Try to find original boot.img here on XDA and try to flash it via PC,or find original stock rom for flashing via SPFlashTool try that
Click to expand...
Click to collapse
Thanks for your help, I have a boot.img of the stock rom, I put in the same folder of MT6577_Android_scatter_emmc and CheckSum.ini , but when I try to download via SP flash tool I get this error:
Image Bootimg checksum failed! Checksum reference value (0x5583) in the config.ini file.
Please re-fill correct checksum values in checksum.ini.
I don't know what are the checksum values, can you tell me where i can find these values?
I am getting this DRAM error, because I don't have the correct files to flash in SP flash tool.
Please can you give me all those files needed to put a whole new firmware in y phone, I need the preloader file, and etc.
My phone can't detect preloader, as it did, and I can't boot it, it's like dead, only appears a red light when I connect to pc and a MTk USB Port (COM).
Please help me with the files needed to flash my whole phone in sp flash tool
Need full ROM with scatter file
Hi Guys, I am looking for full ROM including scatter file for PAP4500T. I need it to load all needed (Preloader, MBR, EBR1, UBOOT, BOOTIMG, RECOVERY, SEC_RO, LOGO, EBR2, ANDROID, CACHE, USRDATA) in to the SP Flash Tool. It can be from Stock or any working ROM. If You could provide me Working ROM with all these and with scatter file which will load everithink to the SPflashTool I would really appreciate that.
Thank You in advance.
Good Night !
My Device is giving this Error in Flash Tool Flash image failure (FAILED WITH ERROR # 1)
Can anyone give me a hint, brikou when trying to upgrade to Android M 6.0.1 ???
Hello dear friends.Here is the problem
I own a N7100 and the mother board was broken.So i got a new one from china.They say it is original and when i check it visually i think that it is original.(i am not sure).It had been working normal by original 4.1 rom.It had cwm recovery.And i wanted to flash a custom rom and it rocommends to use TWRP.So i tried to flash it.But it seemed that i could not install it.It showed CWM when i try to enter recovery mode.After 2-3 attempt it started to stuck on SAMSUNG N7100 screen.Now i neither can enter recovery mode nor to the rom.It loops on samsung screen.The only thing works is download mode.On download mode screen
Product name : GT-N7100
And it says " RPMB: INVALID RPMB DATA"
I can not flash a rom via odin.it always give an error.What can i do to fix it?Is it a hardware problem?can you please explain the ways of fixing it?
Thank you.when i try to flash by heimdall on linux it says
Heimdall v1.4.1
ERROR: Failed to send end session packet!
Releasing device interface...
Hello everyone.
my Lenovo TAB3 Plus (tb3-x70f with an mt8161 chip) is bricked an i need some help.
I think i bricked it when i flashed the boot and recovery partitions via fastboot using the wrong images.
To resore it i tried using the sp flash tools and a firmware i found on the internet.
Sadly the flashing process failed with an error from the sp flash tools:
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
The chioce of firmwares for the tablet is limited and i thought maybe i got the wrong ones.
So i decided to create my own backup from a new, still operating TAB3 Plus.
There for i followed a tutorial on forum.hovatek.com/thread-21970
But this didnt work neither. Sp flash tool failed with BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032).
I installed like every Mediatek driver i could find, tried different usb-ports (some usb3 and some usb2) and cables, operating systems (Windows 10, 7 and ubuntu) and versions of the sp flash tools. Nothing helped.
I got several questions:
What is the DRAM?
Why is the sp flash tool not able to enable it?
Was anyone able to use the sp flash tool with an mt8161?
What might i have done wrong?
Are there other tools i should try?
Thank you all for your comments in advance!
Mo
Hello everyone!
My realme x chinese version is bricked and now im in (Your current image(boot/recovery)have been destroyed and cannot boot)
Please notice these-
I tried to flash twrp but didnt work.
I have stock recovery but ozip file installation fails.(I tried with otg)
I tried realme flash tool but my storage is not showing.
Even i tried to flash boot,vbmeta,vendor,dtbo,recovery,system and everything flashed properly except system.img.
But now when i try this cmd command (fastboot -w) it shows
CreateProcess failed: The system cannot find the file specified. (2)
error: Cannot generate image for userdata.
now what can i do?
please help.
TIA
XyperOps said:
Hello everyone!
My realme x chinese version is bricked and now im in (Your current image(boot/recovery)have been destroyed and cannot boot)
Please notice these-
I tried to flash twrp but didnt work.
I have stock recovery but ozip file installation fails.(I tried with otg)
I tried realme flash tool but my storage is not showing.
Even i tried to flash boot,vbmeta,vendor,dtbo,recovery,system and everything flashed properly except system.img.
But now when i try this cmd command (fastboot -w) it shows
CreateProcess failed: The system cannot find the file specified. (2)
error: Cannot generate image for userdata.
now what can i do?
please help.
TIA
Click to expand...
Click to collapse
Did you got the solution? Please help me!!!!!!!
XyperOps said:
Hello everyone!
My realme x chinese version is bricked and now im in (Your current image(boot/recovery)have been destroyed and cannot boot)
Please notice these-
I tried to flash twrp but didnt work.
I have stock recovery but ozip file installation fails.(I tried with otg)
I tried realme flash tool but my storage is not showing.
Even i tried to flash boot,vbmeta,vendor,dtbo,recovery,system and everything flashed properly except system.img.
But now when i try this cmd command (fastboot -w) it shows
CreateProcess failed: The system cannot find the file specified. (2)
error: Cannot generate image for userdata.
now what can i do?
please help.
TIA
Click to expand...
Click to collapse
Hi,
I have the same problem.
Any chance you could share the method of how you managed to connect otg to transfer the ozip file? I also only have access to stock recovery and the fastboot mode.
I have the stock rom in zip file version which i am absolutely certain works because i have used it before but i can't install a custom recovery no matter what i try.
If possible could you also share the ozip file and the odp file?
Thank You!
I just wrote unbrick instruction here:
[GUIDE] [RMX1901] Unbrick & Install Android 13 Custom ROM
The guide is for a Chinese version of the phone. But might give you an idea for the global version. History: I was on the latest official ROM. But I was already unlocked the boot. Then I tried to install a custom ROM and failed. Because TWRP for...
forum.xda-developers.com
And you could find some information that I found from there.