Hello Guys,
I'm facing issue with my Samsung Galaxy Note II proximity sensor and Network Issue on it,
Network Part:- First of all it was working fine, after getting patch for KitKat 4.4.2 and installing network issue arise, like suddenly i'm not able to make call's or receive it or even unable to access 3G internet on it, it will show 2 tower on device and "H" symbol but no calls will be done or receive it, while network goes unavailable.
Proximity Sensor:- Proximity sensor is not working properly from last 15-20 days, I tried resetting device, blowing air on sensor on whole device, executed few application gyroscope explorer and few other, but issue still persist.
Today I came to know, when I press front camera part or near to it, then proximity sensor is working fine with out any for a while, then again I need to press it near front camera.
Thanks waiting for your solution's....
Did you managed to get a solution for that!
msnewton19 said:
Did you managed to get a solution for that!
Click to expand...
Click to collapse
just replace proximity sensor, it's cheap and helped me to solve similiar issues. my sensor got stuck in one position, sometimes was ok, but now it's working very good, paid 6$ with delivery. easy install
yaro666 said:
just replace proximity sensor, it's cheap and helped me to solve similiar issues. my sensor got stuck in one position, sometimes was ok, but now it's working very good, paid 6$ with delivery. easy install
Click to expand...
Click to collapse
Appreciating your feedback.
It would be great if you explain a little how to install such part! And from where I can buy it.
Many thanks for your valued support.
Hi everyone! My proximity sensors is not working anymore. I have an Asus Zenfone 2 Z00AD that when I'm in a call it got the screen black until the end of that.
In WhatsApp it happens too, so I tried to install xposed and sensors disable but I just got a bootloop.
Xposed is fine and I'm using other modules but Sensors Disable don't. I tried the last 3 versions of it.
So I installed Hardware Disable app but I don't know what device must be disable since I see a lot of them.
So I'll thank you for any kind of help in this matter.
Hi.
So I have some problems with the proximity sensor.. Sometimes it works, sometimes it doesn't (about 50%).
I know there are some ROMs with problems regarding this issue, but I'm on MIUI 9 (multirom 7.10.12).
Can this be a hardware problem? Its a new phone of course...
No one?
hi guys,
Posting here as real me xt does not have a specific thread and might have same as real me x.
I Just want to know how proximity sensor work on realme xt / x or where it is located.
i found my proximity sensor value is not changing when i am closing camera / top of mobile top.
I'm not sure that is expected or my device (realme xt) has an issue.
Could someone test with sensor tools or any app and confirm please. if that is by design could someone say how that works.
Note : screen off while i place mobile on ear on call.
Thanks in advance.
I believe there is a big bug in reamle XT software related to proximity sensor - many times its happening that I am not able to pick up incoming calls as screen goes off as soon as I bring my finger close to screen to pick the call - this is happening because of proximity sensor issue. This is critical defect that realme need to fix at the earliest! To me this seems like a software bug but not a hardware issue.
Realme xt has a very weird proximity sensor..it just and only works with the ear . This might be make many problems..I don't know exactly how they did it or how it works...may be it is a different technology or may be it is just a bad sensor with a very poor resolution or may be software issue..any ways it works..my be it hangs up sometimes..but it works..
Osamaramzy said:
Realme xt has a very weird proximity sensor..it just and only works with the ear . This might be make many problems..I don't know exactly how they did it or how it works...may be it is a different technology or may be it is just a bad sensor with a very poor resolution or may be software issue..any ways it works..my be it hangs up sometimes..but it works..
Click to expand...
Click to collapse
There is a big bug - I am facing it on a regular basis. If you have realme xt hanged on a mobile holder in a moving car with google maps or some other app running and suddenly a call come in then after answering the call its extremely difficult to turn on the speaker as screen goes off as soon as you bring finger close to screen. This is definitely a software bug that need immediate attention from realme developers!
Realme xt is bull**** mobile. Plz dont buy it
Proximity sensor is not responding properly even though they are not bother to fix this rather saying its working fine..
Its my biggest mistake to believe in realme. I would suggest go blindly for redmi, its really awesome.
I got the problem
Its the exact same issue with OnePlus 6t and 7
It's actually using your hand motion to use the sensor the split second you put it on your ear , I don't know why but I tested it and it only works that way and I tried to move my hand without getting close to my ear (or any surface) it didn't work so there is a sensor but maybe its poor due to the notch so they decided to make it work for only a split second
Android 10 OTA had been released for about 4-5 times but always nothing is perfect, so here is a list of bug we encountered and possible fixes...
Bugs/Issues:
USB Debugging turning on after a reboot, even if developer tools are turned off after using USB debugging at least once. (Need more ppl to confirm)
Auto Brightness worse as compared to Pie
VoWiFi (Confirmed not working on Airtel and Jio)
Poor Wi-Fi when using Bluetooth and/or GPS
Mono Audio while recording video
Persistent 'Customize you Mi A3' Bubble in settings. Manual Fix Available
Screen corners and assistant corners are messed up.
AOD draining battery unusually.
Big Launcher icons. Partially fixed in 11.0.15.0
Missing 1/32s shutter speed system-wide. Fixed in 11.0.15.0
FOD not working consistently Improved with 11.0.8.0, 11.0.11.0. Although still reports of flickering or necessity to reboot or need for 'new notifications lock screen display' Fixed with 11.0.14.0
Front camera quality degraded Improved with 11.0.8.0, Fixed with 11.0.11.0
Stuters across UI Reduced with 11.0.8.0
Visible slowdown of phone within 24 hours of usage. Have to reboot after a full charge to again gain back the fluidity. Possible memory management bug. Reduced with 11.0.11.0,11.0.14.0.
Missing EIS Fixed with 11.0.14.0
Note: I listed the bugs after at least a few people reported/confirmed. And struck them when most report the issue had drastically reduced or no longer exist. However, if u still face any issues post them here so the Mi A3 Community can have a look and maybe even suggest a workaround/fix.
In case u find any other bugs or u want to share ur experience after android 10 update, feel free to share it in this thread.
I will update the list with all the bugs posted by the community, so we know which are fixed and whether or not to update from A9 to A10.
Hit the Thanks button if this was what you were looking for
Fingerprint scanner not working
For me choosing pro mode on camera will crash the app.
If the screen is off i can't unlock with FoD unless if I hit the power button to open the screen then use the FoD.
In settings i have on top a suggestion that won't leave for any reason.
Στάλθηκε από το Mi A3 μου χρησιμοποιώντας Tapatalk
Fingerprint scanner for unlock not working for me.
i need to turn on the AOD for android 10 to make it works.
I don't need to turn on AOD before this on android 9.
This is a bug or new features? lulz.
soulz69 said:
Fingerprint scanner for unlock not working for me.
i need to turn on the AOD for android 10 to make it works.
I don't need to turn on AOD before this on android 9.
This is a bug or new features? lulz.
Click to expand...
Click to collapse
It's a bug. Xiaomi india customer support has confirmed that it's a bug in latest update.
mronak02 said:
It's a bug. Xiaomi india customer support has confirmed that it's a bug in latest update.
Click to expand...
Click to collapse
i didn't encounter this bug mine is Indian unit and fingerprint working flawlessly without any error. i think you messed your system before update.
Abbey Bhatt said:
i didn't encounter this bug mine is Indian unit and fingerprint working flawlessly without any error. i think you messed your system before update.
Click to expand...
Click to collapse
In this case it seems that a lot of us messed with system, too
fingerprint sensor is stopped working there is no icon of fingerprint scanner when screen is locked.
My Xiaomi 45W USB-C PD no work after update
Finger print not working
same issue for all mi a3 android 10 update.
on next update only bug's and issue are been resolved.
I haven't rooted or installed any custom rom.. am still facing the issue. After every reboot it works for some time and then it is not showing up.
Recents tab not working
Recents tab not working for me.
Device Personalization Services
Device Personalization Services app (that powers adaptive battery, brightness, etc) is missing from the latest build for me, but can be installed from Play Store
I only got an security patch yesterday. Still no Android 10... About 80mb...
Gesendet von meinem Mi A3 mit Tapatalk
Google Chrome app keeps crash not open for me
Fingerprint problem at first then factory reset now it's working as other user reported double tap to wake to light up screen and use finger print
Sent from my Mi A3 using Tapatalk
Abbey Bhatt said:
i didn't encounter this bug mine is Indian unit and fingerprint working flawlessly without any error. i think you messed your system before update.
Click to expand...
Click to collapse
My phone's bootloader is locked. So how can i mess with system?
fburgos said:
Fingerprint problem at first then factory reset now it's working as other user reported double tap to wake to light up screen and use finger print
Sent from my Mi A3 using Tapatalk
Click to expand...
Click to collapse
I created a guide in this section to activate double tap to wake the on-screen fingerprint sensor..please check it out. no need to factory reset.
Tried it,it doesn't work....
Am I the only one who is experiencing absolutely zero bugs? Everything works perfectly here for me.
Reverted to stock using miflash and just updated to 10 with no troubles or bugs found. Slight increase in battery usage but still perfect