Develop Bugs

[GUIDE][G928G] Update Galaxy S6 Edge+ to Android 6.0.1 Marshmallow (Official)

Hello guys, finally 6.0.1 update has been released via OTA on India for SM-G928G
First you need to flash 5.1.1 firmware, and then you can update via OTA to 6.0.1... so, let's get started.
# Install 5.1.1 firmware from India - G928G
Download: http://www.sammobile.com/firmwares/download/63263/G928GDDU2AOL1_G928GODD2AOL1_INS/
Mirror link: https://androidfilehost.com/?fid=24352994023704146
- Turn off your device and enter Download mode
- Connect via USB your device to your computer
- Open Odin3 v3.10.7
- Click on AP and select .tar.md5 file (it should look like -->THIS)
- Click on Start button and wait
- Reboot (may took a while to boot)
- Then you need to go to Settings > About device > Update software and update to 6.0.1
(Factory data reset after update via OTA is highly recommended.)
Click to expand...
Click to collapse
# How can i root it running 6.0.1?
(This will AVOID you warranty, so do it at your own risk.)
Download: https://dl.twrp.me/nobleltezt/twrp-3.0.0-0-nobleltezt.img.tar.html
Download: https://download.chainfire.eu/924/SuperSU/BETA-SuperSU-v2.68-20160228150503.zip
- Download BETA-SuperSU-v2.68.zip and copy it to your phone
- Turn off your device and enter Download mode
- Open Odin3 v3.10.7
- Click on AP and select twrp-3.0.0-0-nobleltezt.img.tar
- Uncheck Auto-Reboot and click start button
- When Odin shows PASS you need to disconnect your device and reboot it manually (volume down + power button)
- After reboot it manually, you need to quickly press volume up, home and power button to enter recovery mode
- Allow permissions to write on system, and go to install and select BETA-SuperSU-v2.68.zip
- Reboot
(That TWRP 3.0 it's from Note 5, but it's working great, Edge+ version of TWRP stuck at boot logo)
Proof: HERE
Click to expand...
Click to collapse
# How i can install Xposed?
(First, you need to root your phone.)
Download: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Download: http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
- Download xposed-v80.0-sdk23-arm64-custom-build-by-wanam-20160211.zip and copy it to your phone
- Turn off your device and enter recovery mode (volume up + home button + power button)
- Go to install and select xposed-v80.0-sdk23-arm64-custom-build-by-wanam-20160211.zip
- Reboot (boot may took 5min at first boot)
- Install Xposed apk
- Enjoy
Proof: HERE
Click to expand...
Click to collapse
# How can i debloat it?
(First, you need to root your phone.)
Download: https://www.dropbox.com/s/mgay1ngqokft8ab/Orgia%20debloater%20v1.0.zip?dl=0
- Download Orgia debloater v1.0.zip and copy it to your phone
- Turn off your device and enter recovery mode (volume up + home button + power button)
- Go to install and select Orgia debloater v1.0.zip
- Reboot
It will look like --> THIS
Click to expand...
Click to collapse
- Thanks to @Dees_Troy for TWRP
- Thanks to @wanam for Xposed
- Thanks to @Chainfire for SuperSU
- Thanks to @kossiewossie for Orgia Debloater
- Thanks to Tsar3000 for mirror link of the firmware

Mirror link here:
https://androidfilehost.com/?fid=24352994023704146

Work perfectly

rickyevolution said:
Work perfectly
Click to expand...
Click to collapse
did u make a factory reset to get OTA update.... because i cant get it

sarampawilo said:
did u make a factory reset to get OTA update.... because i cant get it
Click to expand...
Click to collapse
Same here... I live in Uruguay and closely follow all the tutorial and always have the message that my device is up to date and that I havent got updates.
Do we have to factory reset the device?
Thanks in advance and sorry my bad english
---------- Post added at 02:22 PM ---------- Previous post was at 01:39 PM ----------
I tryed to remove the sim card and connect to wifi and nothing comes... Later I´ll try to factory reset to try to get the update....

romix_uy said:
Same here... I live in Uruguay and closely follow all the tutorial and always have the message that my device is up to date and that I havent got updates.
Do we have to factory reset the device?
Thanks in advance and sorry my bad english
---------- Post added at 02:22 PM ---------- Previous post was at 01:39 PM ----------
I tryed to remove the sim card and connect to wifi and nothing comes... Later I´ll try to factory reset to try to get the update....
Click to expand...
Click to collapse
Yes, you need to factory reset your device after flash 5.1.1 firmware from India.

Did not work for me... Still get no OTA after the procedure. I'm in Brazil . I'll factory reset right now.

briann_cs said:
Yes, you need to factory reset your device after flash 5.1.1 firmware from India.
Click to expand...
Click to collapse
Thanks! Downloading update!
Can you tell me if the update have only english language. I need spanish language...
Thanks again....

romix_uy said:
Thanks! Downloading update!
Can you tell me if the update have only english language. I need spanish language...
Thanks again....
Click to expand...
Click to collapse
You can enable spanish language by using this app: https://play.google.com/store/apps/details?id=sightidea.com.setlocale

briann_cs said:
You can enable spanish language by using this app: https://play.google.com/store/apps/details?id=sightidea.com.setlocale
Click to expand...
Click to collapse
I can confirm that the factory reset make the magic and let you download the update... I will download the app and enable spanish language... Thanks a lot!! :highfive:
---------- Post added at 10:03 PM ---------- Previous post was at 09:19 PM ----------
Hi again... I installed the program https://play.google.com/store/apps/details?id=sightidea.com.setlocale
I run a command in adb for grant permissions to change locale (no root), but the change is partial. I have parts of system and programs in spanish and parts in english.... Is that correct? can I make the whole
system to spanish or is not possible...
Thanks again in advance
---------- Post added at 10:51 PM ---------- Previous post was at 10:03 PM ----------
Update: I root the phone and installed a app that needs root... After that spanish language appears...
Thanks a lot to all who help...

Can you pls provide bootloader and modem of g28g marshmallow
Sent from my SM-G928F using Tapatalk

sagarb said:
Can you pls provide bootloader and modem of g28g marshmallow
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
I'm not on ubuntu, so i can't create a Odin package of modem and bootloader.

briann_cs said:
You can enable spanish language by using this app: https://play.google.com/store/apps/details?id=sightidea.com.setlocale
Click to expand...
Click to collapse
Can this app be ussed on any device (galaxy s6 flat) ???
romix_uy said:
I can confirm that the factory reset make the magic and let you download the update... I will download the app and enable spanish language... Thanks a lot!! :highfive:
Hi again... I installed the program https://play.google.com/store/apps/details?id=sightidea.com.setlocale
I run a command in adb for grant permissions to change locale (no root), but the change is partial. I have parts of system and programs in spanish and parts in english.... Is that correct? can I make the whole
system to spanish or is not possible...
Thanks again in advance
Update: I root the phone and installed a app that needs root... After that spanish language appears...
Thanks a lot to all who help...
Click to expand...
Click to collapse
Can u put the link to do the root please ???
---------- Post added at 07:54 AM ---------- Previous post was at 07:50 AM ----------
romix_uy said:
Same here... I live in Uruguay and closely follow all the tutorial and always have the message that my device is up to date and that I havent got updates.
Do we have to factory reset the device?
Thanks in advance and sorry my bad english
---------- Post added at 02:22 PM ---------- Previous post was at 01:39 PM ----------
I tryed to remove the sim card and connect to wifi and nothing comes... Later I´ll try to factory reset to try to get the update....
Click to expand...
Click to collapse
i make the factory restore, get the update but like u can set spanish on my phone.
I´ll use it untill the update to At&t MX came out to light

Finally downloading the official marshmallow update OTA

briann_cs said:
I'm not on ubuntu, so i can't create a Odin package of modem and bootloader.
Click to expand...
Click to collapse
sagarb said:
Can you pls provide bootloader and modem of g28g marshmallow
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
Of course I can... Tell me how to do it
---------- Post added at 03:37 PM ---------- Previous post was at 03:34 PM ----------
sarampawilo said:
Can this app be ussed on any device (galaxy s6 flat) ???
I dont know
Can u put the link to do the root please ???
The guide is in the first page of that post
---------- Post added at 07:54 AM ---------- Previous post was at 07:50 AM ----------
i make the factory restore, get the update but like u can set spanish on my phone.
I´ll use it untill the update to At&t MX came out to light
Click to expand...
Click to collapse
If you root it works flawless

Hello, Iam the owner of a Verizon (USA ) Samsung S6 Edge Plus...
Model Number: SM-G928V
Android Version: 5.1.1
Base Band: G928VVRU2AOJ2
Click to expand...
Click to collapse
my question its:
1.-to get the Android 6.0.1 Marshmallow on this post, do I need to install the 5.1.1 firmware from India - G928G .... because my cell its a SM-G928V and Android version 5.1.1 , so can I install the G928G on a G928V ?
2.-If you say... "yes, you need to install the firmware version from India" then, Its not problem with my phone? alls works fine after install this firmware ?
3.-If I can install this version 5.1.1 from India, its able to install the update , because Iam using the phone In Mexico, with a sim Mexican sim Card, and of course via "OTA" I cant install any update.....
4.-of course my language its Spanish, so I read I need to root the phone to install this language after update to Marshnmallow, what happen if I don't want to root the phone , the Spanish language its available after update to 6.01 ?
thanks for all, and I hope my bad English can understand here....

fabiooli said:
Did not work for me... Still get no OTA after the procedure. I'm in Brazil . I'll factory reset right now.
Click to expand...
Click to collapse
Same here. Doing the factory reset right now. Will post if OTA showing up after that.
------
Worked like a CHARM.... after factory reset, click on Update and OTA for Marshmallow showing up. When it's over, I will perform another factory reset and do the root for Spanish method. THANKS SO MUCH!!!

Had big problems when installing TWRP recovery.
I downloaded and installed the india firmware and updated to MM through OTA. Everything went fine. After that i went ahead and installed TWRP. After reboot the phone went into a bootloop. Only thing that was working was the recovery. Since there is no odin flashable MM firmware for the G928G, i thought that i was stuck for a while. Since the recovery worked i went ahead and installed the Audax 1.3 rom. So Audax saved me. Hope this helps someone who might get into the same trouble as me. I also had to install the Skyhigh kernel for MM, since my phone never goes into deepsleep anymore on stock kernel. Does anyone know why this happens btw? I can't ever go back to stock again probably. That sucks when i decide to sell the phone.

gregges said:
Had big problems when installing TWRP recovery.
I downloaded and installed the india firmware and updated to MM through OTA. Everything went fine. After that i went ahead and installed TWRP. After reboot the phone went into a bootloop. Only thing that was working was the recovery. Since there is no odin flashable MM firmware for the G928G, i thought that i was stuck for a while. Since the recovery worked i went ahead and installed the Audax 1.3 rom. So Audax saved me. Hope this helps someone who might get into the same trouble as me. I also had to install the Skyhigh kernel for MM, since my phone never goes into deepsleep anymore on stock kernel. Does anyone know why this happens btw? I can't ever go back to stock again probably. That sucks when i decide to sell the phone.
Click to expand...
Click to collapse
Samsung has become more strict. Therefore when you root the phone gives problem. Most people and if I'm not mistaken everyone who root the edge+ have the same problem after rooting.

Kuganeswaraan said:
Samsung has become more strict. Therefore when you root the phone gives problem. Most people and if I'm not mistaken everyone who root the edge+ have the same problem after rooting.
Click to expand...
Click to collapse
In my g928g worked flawless... I just used the guide in the first page of that post

Marshmallow OTA link here

Here's the official OTA link to update from LCA43 (Lollipop) to MEC24H (Marshmallow). Enjoy! You can only flash this on a watch that is completely stock! If you need to restore your watch, Sony PC Companion might work.
https://android.googleapis.com/pack...e2ee74fbab.signed-tetra-MEC24H-from-LCA43.zip
Small note: This OTA will update the bootloader to block "tethered booting" in fastboot while the bootloader is locked (so you will have to unlock the bootloader to use TWRP). If you want to keep the old bootloader, there is a post on the third page. This zip is signed by Sony, so you can flash it in stock recovery with a locked bootloader.
Edit: Here are some screenshots. Not much has changed compared to Lollipop, and Sony hasn't added anything compared to other watches, so they're not very interesting. https://imgur.com/a/Vp8hY (Ambient Mode might look worse on your watch because after I flashed Marshmallow I edited build.prop to disable low bit ambient mode. If you want to do this too, I made a crappy tutorial for that on reddit: https://www.reddit.com/r/AndroidWea...an_disable_low_bit_ambient_mode_to_make_your/)

Hi,
thanks for link. Could you give here some tutorial how to install this update ?
Must have unlock bootloader for this update ?
Thanks.

kalousek said:
Could you give here some tutorial how to install this update ?
Click to expand...
Click to collapse
Open up adb on a computer and plug in the watch. Issue adb reboot recovery and tap the watch screen when the recovery droid picture shows up. Swipe down to the sideload option then swipe right. Issue adb sideload blahblah.zip (obviously put the real zip name where "blahblah" is) and wait. After it finishes, swipe to the reboot option and swipe right to select. Your watch has been updated!

andrewia said:
Here's the official OTA link to update from LCA43 (Lollipop) to MEC24H (Marshmallow). Enjoy!
https://android.googleapis.com/pack...e2ee74fbab.signed-tetra-MEC24H-from-LCA43.zip
This OTA will update the bootloader to block "tethered booting" in fastboot with a locked bootloader. Unlocking the bootloader restores functionality. You can flash this zip in stock recovery with a locked bootloader.
Edit: Here are some screenshots. Not much has changed compared to Lollipop, and Sony hasn't added anything compared to other watches, so they're not very interesting. https://imgur.com/a/Vp8hY Ambient Mode might look worse on your watch because I edited build.prop to disable low bit ambient mode. I made a crappy tutorial for that on reddit: https://www.reddit.com/r/AndroidWea...an_disable_low_bit_ambient_mode_to_make_your/
Click to expand...
Click to collapse
so you have already disabled low bit mode??? and did you reup the zip after or was that done before you uploaded it?

andrewia said:
Open up adb on a computer and plug in the watch. Issue adb reboot recovery and tap the watch screen when the recovery droid picture shows up. Swipe down to the sideload option then swipe right. Issue adb sideload blahblah.zip (obviously put the real zip name where "blahblah" is) and wait. After it finishes, swipe to the reboot option and swipe right to select. Your watch has been updated!
Click to expand...
Click to collapse
Thanks for tutorial

lohtse said:
so you have already disabled low bit mode??? and did you reup the zip after or was that done before you uploaded it?
Click to expand...
Click to collapse
The zip is the stock zip on Google's servers. My mod is separate, I just mentioned it in case anyone was wondering why my card previews looked better than theirs.

andrewia said:
The zip is the stock zip on Google's servers. My mod is separate, I just mentioned it in case anyone was wondering why my card previews looked better than theirs.
Click to expand...
Click to collapse
anychance you can provide a revised zip with the mod??

Can Someone provide boot.img from MM update?

lohtse said:
anychance you can provide a revised zip with the mod??
Click to expand...
Click to collapse
No, because the mod is literally only adding a single character (#) to a line in build.prop. If I repacked it into a zip you would still have to boot TWRP and use adb to flash it, which is 90% of the work.

I'll try to pull the boot image tomorrow.

andrewia said:
I'll try to pull the boot image tomorrow.
Click to expand...
Click to collapse
Thanks. I want look at ramdisk. And recompile kernel for MM update...

anyone finding the UI really laggy since doing this update ?

I have a bone stock watch, locked bootloader etc. When trying to sideload I get status 7 error when trying to update. Any ideas?

pickles76 said:
I have a bone stock watch, locked bootloader etc. When trying to sideload I get status 7 error when trying to update. Any ideas?
Click to expand...
Click to collapse
mine was completely stock and i just followed instructions in this post and went fine

bigr1979 said:
mine was completely stock and i just followed instructions in this post and went fine
Click to expand...
Click to collapse
Yup, I've done this many times before on other devices but this one ends up with status 7 doing exactly as explained. Tried downloading the file a few times (im on OSX/Mac btw) and still the same results. Maybe should try on a windows-machine.

pickles76 said:
I have a bone stock watch, locked bootloader etc. When trying to sideload I get status 7 error when trying to update. Any ideas?
Click to expand...
Click to collapse
complete stock, locked bootloader and unrooted and no issues for me..
On that note what are the best ways to Unlock bootloader(will I loose data?), Flash twrp and then root?
---------- Post added at 11:49 AM ---------- Previous post was at 11:48 AM ----------
bigr1979 said:
anyone finding the UI really laggy since doing this update ?
Click to expand...
Click to collapse
Nope I actually find it snappier.... I have 30+ apps on as well

lohtse said:
complete stock, locked bootloader and unrooted and no issues for me..
On that note what are the best ways to Unlock bootloader(will I loose data?), Flash twrp and then root?
---------- Post added at 11:49 AM ---------- Previous post was at 11:48 AM ----------
Nope I actually find it snappier.... I have 30+ apps on as well
Click to expand...
Click to collapse
I used windows 10 64bit to flash mine.... Seems to be getting a bit snappier now that its calming down and have downloaded music onto etc cheers thanks OP for the update

andrewia said:
I'll try to pull the boot image tomorrow.
Click to expand...
Click to collapse
Never mind.
I've extracted boot.img.
Try to rebuild my kernel for MM.
Sent from my HTC One_M8 using XDA-Developers mobile app

pickles76 said:
I have a bone stock watch, locked bootloader etc. When trying to sideload I get status 7 error when trying to update. Any ideas?
Click to expand...
Click to collapse
Hello
I have the same problem. How do you solve it?
Thanks.
OK now I flashed the stock kernel of LCA43 before flashing the full rom

mickael91210 said:
Hello
I have the same problem. How do you solve it?
Thanks.
OK now I flashed the stock kernel of LCA43 before flashing the full rom
Click to expand...
Click to collapse
Could you explain more? Im still stuck..

Fix for dm-verity verification failed update from adb is disabled?

I was trying to adb sideload marshmallow onto my at&t Note 5. I may have forgotten to run the adb in admin mode, so the device reset to Lollipop. When I tried to run again the phone gives an error when trying to put into adb sideload mode " m-verity verification failed update from adb is disabled". I tried re-flashing back to 5.1.1 via odin but with no luck. Anyone have a suggestion or a fix for this?
The phone powers on with no issues, but I'd like to put Marshmallow on the device and not wait another lifetime for at&t to send out the OTA.

Same problem but I had run as administrator enabled I got to about 15% done then I think I got a status 7 error or something like that and now I have the dm verification error

ryanrange said:
Same problem but I had run as administrator enabled I got to about 15% done then I think I got a status 7 error or something like that and now I have the dm verification error
Click to expand...
Click to collapse
Looks like there's no fix in site...guess we will have to wait for the OTA.

xj911 said:
Looks like there's no fix in site...guess we will have to wait for the OTA.
Click to expand...
Click to collapse
Using ODIN to do a full restore of the ATT ROM. Its exactly what I am doing now to fix that issue, I hope
http://forum.xda-developers.com/att-galaxy-note5/general/n920a-odin-restore-n920aatt2aoj1-t3286551
IT WORKS. allows me to apply the update again!!

ekerbuddyeker said:
Using ODIN to do a full restore of the ATT ROM. Its exactly what I am doing now to fix that issue, I hope
http://forum.xda-developers.com/att-galaxy-note5/general/n920a-odin-restore-n920aatt2aoj1-t3286551
IT WORKS. allows me to apply the update again!!
Click to expand...
Click to collapse
hmmm, Maybe I'm flashing the wrong ROM because mine keeps failing. Did you get it from this thread: http://forum.xda-developers.com/att-galaxy-note5/general/restore-files-pulled-smartsync-t3200352

xj911 said:
hmmm, Maybe I'm flashing the wrong ROM because mine keeps failing. Did you get it from this thread: http://forum.xda-developers.com/att-galaxy-note5/general/restore-files-pulled-smartsync-t3200352
Click to expand...
Click to collapse
http://forum.xda-developers.com/att-galaxy-note5/general/n920a-odin-restore-n920aatt2aoj1-t3286551

I have this same issue and I keep trying to do an ODIN restore using the methods provided but it stays stuck on the NAND write start and it doesn't progress from that point. I've tried a few different MD5 files I have found. Can anyone offer any help?

DrTyDoZn said:
I have this same issue and I keep trying to do an ODIN restore using the methods provided but it stays stuck on the NAND write start and it doesn't progress from that point. I've tried a few different MD5 files I have found. Can anyone offer any help?
Click to expand...
Click to collapse
If you use the one from the thread above and you run Odin in Admin mode it should work fine.

xj911 said:
If you use the one from the thread above and you run Odin in Admin mode it should work fine.
Click to expand...
Click to collapse
how do I run Odin in Admin mode? Is it different from right clicking and run as administrator or is that it? Just tried that and still stops at NAND write

DrTyDoZn said:
how do I run Odin in Admin mode? Is it different from right clicking and run as administrator or is that it? Just tried that and still stops at NAND write
Click to expand...
Click to collapse
Yes. Are you putting each file in the correct place in Odin? The files all begin with the box they belong in (AP, BL, CP, CSC)

Only flash AP don't flash anything else. Let boot then reboot to recovery. Dm-verity should be back to normal. My resets all the time after I use this method.

TechNyne66 said:
Only flash AP don't flash anything else. Let boot then reboot to recovery. Dm-verity should be back to normal. My resets all the time after I use this method.
Click to expand...
Click to collapse
Just tried this and also tried on a different laptop with the same results. How long do I need to wait for ODIN to start? I've waitedd about 15 minutes with no change
---------- Post added at 08:04 PM ---------- Previous post was at 07:18 PM ----------
Should I try an older version of ODin?
---------- Post added at 08:14 PM ---------- Previous post was at 08:04 PM ----------
Just noticed I was using an older version of ODIN. Used 3.11 and it seems to be working. Thanks allz!

Had same issue after trying to apply Marshmallow and fix worked great.
Thank you!

ekerbuddyeker said:
http://forum.xda-developers.com/att-galaxy-note5/general/n920a-odin-restore-n920aatt2aoj1-t3286551
Click to expand...
Click to collapse
sorry i have the same problem, but i have installed N920AUCU2APB2
if install odin restore n920aatt2aoj1 work fine?
------ solved -------
i flash with pb2 via odin and sideload is enabled!!!

[email protected] Phone
I have the same issue my phone is N910AUCS2DOI6 Got the same error trying to flashing to marshmallow. Any sugestions how to bypass and flash it.
Thank you

Flashing a zip?
So, forgive me if I am *way* off. Perhaps the answer is too obvious for me to notice. But Odin doesn't permit flashing of zips. I extracted everything and put it in a tar using WinAce. Was that the right procedure?
---------- Post added at 08:43 AM ---------- Previous post was at 08:41 AM ----------
It didn't work. DM-verity error palapalooza as usual. N910V on 5.1.1, not rooted. Thanks.
SpockSpock said:
So, forgive me if I am *way* off. Perhaps the answer is too obvious for me to notice. But Odin doesn't permit flashing of zips. I extracted everything and put it in a tar using WinAce. Was that the right procedure?
Click to expand...
Click to collapse

New update has arrived 11.0.325ST

Good news, global ROM receives New update today.
Lenovo Z6 Pro.

Ok, so what's new / improvements ?

benjieb said:
Ok, so what's new / improvements ?
Click to expand...
Click to collapse
I don't know, I reinstall the firmware and lose the package, now system update refuse to give me again OTA ;-;

benjieb said:
Ok, so what's new / improvements ?
Click to expand...
Click to collapse
I don't have any idea how to recover my update ota, lenovo is trolling me.

I don't understand what your issue is. But if you missed OTA, is will come again soon.
I think one way to help that is to clear cache of update app. Just google it.
While you are there, once the OTA is downloaded to your phone AND before actually upgrading, it would be good to copy the update file to your PC and share it with others who don't get the OTA.

benjieb said:
I don't understand what your issue is. But if you missed OTA, is will come again soon.
I think one way to help that is to clear cache of update app. Just google it.
While you are there, once the OTA is downloaded to your phone AND before actually upgrading, it would be good to copy the update file to your PC and share it with others who don't get the OTA.
Click to expand...
Click to collapse
I found the solution, I'll repost the fastboot link that alexeei provided.
The overall improvements I've been noticing:
Connection problems that sometimes occurred in my region, are no longer giving.
Battery I noticed is lasting about 45 minutes longer.
PT-BR was basically 100% implemented in every layout.
The 4G connection has been improved.
I also believe that they have made some changes in the kernel, because the way the cores are working, is different gives version 284, ie better, I'll find out if in Benchmark improved anything.
And the audio in dolby atmos, I'm feeling that the audio has improved, it's louder and clearer.
camera haven't tested yet
However this is it: D

Here the link
Thanks for @alexeei
https://androidfilehost.com/?fid=1899786940962594224

hehk1234 said:
Here the link
Thanks for @alexeei
https://androidfilehost.com/?fid=1899786940962594224
Click to expand...
Click to collapse
this fastboot requires open bootloader?

x-geo said:
this fastboot requires open bootloader?
Click to expand...
Click to collapse
yes

alexeei said:
yes
Click to expand...
Click to collapse
And i can close it again after install it?

x-geo said:
And i can close it again after install it?
Click to expand...
Click to collapse
No, it's not neccessary

ok, i'll install it after it charges... this version comes with the new 4D Utouch?

In first Thank's a lot for the file !!!!
But after the flash , my phone don't reboot, hopefully reflash Alexeei Twrp solve my problem, evrithing seem ok now.
More info when more tested the rom

@alexeei, the file you shared is full ROW rom?
If so, when flashing with TWRP over an older version of ROW, will it keep data and apps?
Thanks!

I flash over my 284st the alexeei fastboot rom, but with the fastboot .bat.
And i have keep all my app,data and setting.
But the phone don't work in first attempt, must reflash the twrp for fix boot.
Don't know if this problème is only for me or more general.
My config before flash. Rom 11.0.284st + twrp alexeei + magisk 19.3.
Now everything seem ok and perf is good, except aod still dont work.

benjieb said:
@alexeei, the file you shared is full ROW rom?
If so, when flashing with TWRP over an older version of ROW, will it keep data and apps?
Thanks!
Click to expand...
Click to collapse
yes
---------- Post added at 08:27 PM ---------- Previous post was at 08:24 PM ----------
wlcbtd said:
I flash over my 284st the alexeei fastboot rom, but with the fastboot .bat.
And i have keep all my app,data and setting.
But the phone don't work in first attempt, must reflash the twrp for fix boot.
Don't know if this problème is only for me or more general.
My config before flash. Rom 11.0.284st + twrp alexeei + magisk 19.3.
Now everything seem ok and perf is good, except aod still dont work.
Click to expand...
Click to collapse
You only need flash vbmeta with --disable-verity option, i make it default in installer script in future releases.

Ok , thank's for the info !

How can I install this update?

Brillant !
Do you think it can be flashed over CN rom and keep data and apps?
Also, do you know where to find same type of rom file with latest CN rom?
I want to try latest ROW, but I know I will revert back to CN.

ManCast said:
How can I install this update?
Click to expand...
Click to collapse
See post #30 on these tread
https://forum.xda-developers.com/android/help/rom-lenovo-z6-pro-l78051-qpst-edl-t3947149
, same thing for these update.
But only if you already are in raw rom, update from chinese is untested by now.

WW 1910.64 RAW FULL & OTA update download links + root img link, notes & instructions

WW 1910.64 RAW FULL & OTA update download links + root img link, notes & instructions
RAW WW 1910.64 2.66GB
https://mega.nz/#!spBlACjC!S1UcaxBmnL_e3GGeoBL1ebWJPbSyPQBZESFdxbakuGc
WW OTA file (From. 44 to. 64) 122MB
https://fota2.asus.com/delta_packag...910.44-16.0631.1910.64-12100105-fota-user.zip
FULL WW FIRMWARE 2.2GB
http://dlcdnets.asus.com/pub/ASUS/Z..._I001_1-ASUS-16.0631.1910.64-1.1.253-user.zip
rootww191064.img 48.2MB
https://mega.nz/#!PzYhma5b!1did324GAxfvRk6z4LCKM2pfhbwf4jKpb1e1ER6bLYk
The safest way to update without losing anything is to download the 2.2gb full firmware file on your device then move it to root using the built in file manager. Once you have moved it restart your device and follow the upgrade instructions, takes less than 5 minutes.
Version number
16.0631.1910.64
Update information
1.Fixed Docomo SIM often disconnected mobile network issue.
2.Fixed occasional touch failure.
3.Fixed that navigation bar will not shrink to bottom automatically when playing PUBG MOBILE game.
4.Fixed call volume being lower than normal for Facebook and WhatsApp calling.
5.Fixed File Manager crashing when opening a picture in the middle folder.
6.Fixed that user can’t share Airtrigger or key mapping settings in “Star Commander”.
It still has the October 1st Android security patch.

FULL WW FIRMWARE
http://dlcdnets.asus.com/pub/ASUS/Z..._I001_1-ASUS-16.0631.1910.64-1.1.253-user.zip

Updated and keep root, thanks mate.

cloud1 said:
FULL WW FIRMWARE
http://dlcdnets.asus.com/pub/ASUS/Z..._I001_1-ASUS-16.0631.1910.64-1.1.253-user.zip
Click to expand...
Click to collapse
What's the difference between the User version and the raw version please. Everytime i have to wait for the raw version, is there a way for me to move to the User version and get quick updates? If there is please how? Thanks

tnbt said:
What's the difference between the User version and the raw version please. Everytime i have to wait for the raw version, is there a way for me to move to the User version and get quick updates? If there is please how? Thanks
Click to expand...
Click to collapse
Just download the full one and put on root.
That's what I did and it updated after a restart.

cloud1 said:
Just download the full one and put on root.
That's what I did and it updated after a restart.
Click to expand...
Click to collapse
I did that with the previous updates and it never worked till i got the raw version and flashed. Dunno how to get to use the fota versions. Any help?

tnbt said:
I did that with the previous updates and it never worked till i got the raw version and flashed. Dunno how to get to use the fota versions. Any help?
Click to expand...
Click to collapse
Seriously just grab the full version and put on root, I did it like half an hour ago zero issues.

tnbt said:
I did that with the previous updates and it never worked till i got the raw version and flashed. Dunno how to get to use the fota versions. Any help?
Click to expand...
Click to collapse
Do you have a WW version with WW fingerprint? In case you have a WW version with CN fingerprint FOTA versions won't work!

How about keeping rooted using FULL WW FIRMWARE 2.2GB?

FOTA update will work on Tencent with WW rom. Just rename FOTA zip file exactly as full ROM

Mad_Duke said:
Do you have a WW version with WW fingerprint? In case you have a WW version with CN fingerprint FOTA versions won't work!
Click to expand...
Click to collapse
I have changed fingerprint as well to WW
---------- Post added at 03:25 PM ---------- Previous post was at 03:25 PM ----------
SkipperRyujin said:
FOTA update will work on Tencent with WW rom. Just rename FOTA zip file exactly as full ROM
Click to expand...
Click to collapse
Will try this out, thanks

Can i install from 16.0631.1908.12 to this FULL version with update or i must have 1910.44 version ? Have fingerprint to WW.
I just tryed and its working Thanks for update !

cloud1 said:
Just download the full one and put on root.
That's what I did and it updated after a restart.
Click to expand...
Click to collapse
What do u mean by put on root.
Which folder are u talking about ?
Just downloaded the full rom.
I am currently on 1910.44 and rooted.
Will I be able to tay rooted after update ?

CRYPTfromCATACOMBZ said:
How about keeping rooted using FULL WW FIRMWARE 2.2GB?
Click to expand...
Click to collapse
Download full rom, place in root of storage, reboot, update. Don't select restart, select later. Open magisk manager, click to install magisk, select after ota, force install ok then reboot. Job done, root maintained

reg66 said:
Download full rom, place in root of storage, reboot, update. Don't select restart, select later. Open magisk manager, click to install magisk, select after ota, force install ok then reboot. Job done, root maintained
Click to expand...
Click to collapse
I forgot about the magisk part and rebooted losing root in the process.
Any way to extract the boot image so I can patch it with magisk? It do I need to wait for the RAW ROM?

gilsol said:
I forgot about the magisk part and rebooted losing root in the process.
Any way to extract the boot image so I can patch it with magisk? It do I need to wait for the RAW ROM?
Click to expand...
Click to collapse
Well I have just asked over on the Vietnam Telegram group if there's an ETA on the patched root img. Hopefully I'll get a response soon and will let you know ASAP. But yeah, once that's released you can go ahead and flash it for root using the cmd "fastboot flash boot xxxx.img"
Hopefully you can/don't mid waiting a couple of days for it to be released - until then, you'll just have to be unrooted
I'll keep you posted...

reg66 said:
Well I have just asked over on the Vietnam Telegram group if there's an ETA on the patched root img. Hopefully I'll get a response soon and will let you know ASAP. But yeah, once that's released you can go ahead and flash it for root using the cmd "fastboot flash boot xxxx.img"
Hopefully you can/don't mid waiting a couple of days for it to be released - until then, you'll just have to be unrooted
I'll keep you posted...
Click to expand...
Click to collapse
Thanks a lot, I have been researching this a bit and I'm going to try to get the boot image from the fulll ROM payload.bin. there are tools for this, if I'm successful than magisk can take care of the rest.
I'll keep you posted as well.
:good:

zohaibshafijutt said:
What do u mean by put on root.
Which folder are u talking about ?
Just downloaded the full rom.
I am currently on 1910.44 and rooted.
Will I be able to tay rooted after update ?
Click to expand...
Click to collapse
Just move the zip update from downloads folder and paste it into the main area where other folders are stored, like downloads/music/ringtones etc etc... Don't place it in any folder, just place it in the same location as those other folders...
From there, restart the phone and when update is detected, choose to update but DON'T select to reboot once it is done. Instead, open Magisk Manager and select 'install' for Magisk (not magisk manager), then select 'Install to Inactive Slot (After OTA). Install it and reboot. That's it, root will be maintained :good:

Hi pls help. Even though i put it in internal storage and restart it. My phone cant detect an update. My firmware is 1910.44 and tencent fully converted to WW with WW fingerprint

carlaldous said:
Hi pls help. Even though i put it in internal storage and restart it. My phone cant detect an update. My firmware is 1910.44 and tencent fully converted to WW with WW fingerprint
Click to expand...
Click to collapse
Did you download the full rom or the small ota? If it's the small ota you need to rename it to exact name of the full ota, or just download the full... I went for the full rom. Did you restart the phone after?