I was trying to adb sideload marshmallow onto my at&t Note 5. I may have forgotten to run the adb in admin mode, so the device reset to Lollipop. When I tried to run again the phone gives an error when trying to put into adb sideload mode " m-verity verification failed update from adb is disabled". I tried re-flashing back to 5.1.1 via odin but with no luck. Anyone have a suggestion or a fix for this?
The phone powers on with no issues, but I'd like to put Marshmallow on the device and not wait another lifetime for at&t to send out the OTA.
Same problem but I had run as administrator enabled I got to about 15% done then I think I got a status 7 error or something like that and now I have the dm verification error
ryanrange said:
Same problem but I had run as administrator enabled I got to about 15% done then I think I got a status 7 error or something like that and now I have the dm verification error
Click to expand...
Click to collapse
Looks like there's no fix in site...guess we will have to wait for the OTA.
xj911 said:
Looks like there's no fix in site...guess we will have to wait for the OTA.
Click to expand...
Click to collapse
Using ODIN to do a full restore of the ATT ROM. Its exactly what I am doing now to fix that issue, I hope
http://forum.xda-developers.com/att-galaxy-note5/general/n920a-odin-restore-n920aatt2aoj1-t3286551
IT WORKS. allows me to apply the update again!!
ekerbuddyeker said:
Using ODIN to do a full restore of the ATT ROM. Its exactly what I am doing now to fix that issue, I hope
http://forum.xda-developers.com/att-galaxy-note5/general/n920a-odin-restore-n920aatt2aoj1-t3286551
IT WORKS. allows me to apply the update again!!
Click to expand...
Click to collapse
hmmm, Maybe I'm flashing the wrong ROM because mine keeps failing. Did you get it from this thread: http://forum.xda-developers.com/att-galaxy-note5/general/restore-files-pulled-smartsync-t3200352
xj911 said:
hmmm, Maybe I'm flashing the wrong ROM because mine keeps failing. Did you get it from this thread: http://forum.xda-developers.com/att-galaxy-note5/general/restore-files-pulled-smartsync-t3200352
Click to expand...
Click to collapse
http://forum.xda-developers.com/att-galaxy-note5/general/n920a-odin-restore-n920aatt2aoj1-t3286551
I have this same issue and I keep trying to do an ODIN restore using the methods provided but it stays stuck on the NAND write start and it doesn't progress from that point. I've tried a few different MD5 files I have found. Can anyone offer any help?
DrTyDoZn said:
I have this same issue and I keep trying to do an ODIN restore using the methods provided but it stays stuck on the NAND write start and it doesn't progress from that point. I've tried a few different MD5 files I have found. Can anyone offer any help?
Click to expand...
Click to collapse
If you use the one from the thread above and you run Odin in Admin mode it should work fine.
xj911 said:
If you use the one from the thread above and you run Odin in Admin mode it should work fine.
Click to expand...
Click to collapse
how do I run Odin in Admin mode? Is it different from right clicking and run as administrator or is that it? Just tried that and still stops at NAND write
DrTyDoZn said:
how do I run Odin in Admin mode? Is it different from right clicking and run as administrator or is that it? Just tried that and still stops at NAND write
Click to expand...
Click to collapse
Yes. Are you putting each file in the correct place in Odin? The files all begin with the box they belong in (AP, BL, CP, CSC)
Only flash AP don't flash anything else. Let boot then reboot to recovery. Dm-verity should be back to normal. My resets all the time after I use this method.
TechNyne66 said:
Only flash AP don't flash anything else. Let boot then reboot to recovery. Dm-verity should be back to normal. My resets all the time after I use this method.
Click to expand...
Click to collapse
Just tried this and also tried on a different laptop with the same results. How long do I need to wait for ODIN to start? I've waitedd about 15 minutes with no change
---------- Post added at 08:04 PM ---------- Previous post was at 07:18 PM ----------
Should I try an older version of ODin?
---------- Post added at 08:14 PM ---------- Previous post was at 08:04 PM ----------
Just noticed I was using an older version of ODIN. Used 3.11 and it seems to be working. Thanks allz!
Had same issue after trying to apply Marshmallow and fix worked great.
Thank you!
ekerbuddyeker said:
http://forum.xda-developers.com/att-galaxy-note5/general/n920a-odin-restore-n920aatt2aoj1-t3286551
Click to expand...
Click to collapse
sorry i have the same problem, but i have installed N920AUCU2APB2
if install odin restore n920aatt2aoj1 work fine?
------ solved -------
i flash with pb2 via odin and sideload is enabled!!!
[email protected] Phone
I have the same issue my phone is N910AUCS2DOI6 Got the same error trying to flashing to marshmallow. Any sugestions how to bypass and flash it.
Thank you
Flashing a zip?
So, forgive me if I am *way* off. Perhaps the answer is too obvious for me to notice. But Odin doesn't permit flashing of zips. I extracted everything and put it in a tar using WinAce. Was that the right procedure?
---------- Post added at 08:43 AM ---------- Previous post was at 08:41 AM ----------
It didn't work. DM-verity error palapalooza as usual. N910V on 5.1.1, not rooted. Thanks.
SpockSpock said:
So, forgive me if I am *way* off. Perhaps the answer is too obvious for me to notice. But Odin doesn't permit flashing of zips. I extracted everything and put it in a tar using WinAce. Was that the right procedure?
Click to expand...
Click to collapse
Related
Hey everyone. I tried rooting using Heimdall on my Mac, but apparently did something very wrong. I can still boot into download mode, but when I turn my phone on I get the initial logo, then a black screen. Any help to get my phone back up would be greatly appreciated!
jordan8201 said:
Hey everyone. I tried rooting using Heimdall on my Mac, but apparently did something very wrong. I can still boot into download mode, but when I turn my phone on I get the initial logo, then a black screen. Any help to get my phone back up would be greatly appreciated!
Click to expand...
Click to collapse
If you can still get into download mode.. you're not bricked..
Give me a little more info on what you tried to flash.... as well as what Android version you were on... and if you had or were trying to get cwm recovery on the device via heimdall..
No worries... we'll get ya back up and running... just don't get flash happy and try something until myself or another member can confirm it's right..
I'm going to assume you were following a guide for rooting with heimdall... link that guide so I can look at it..
Gil81 said:
If you can still get into download mode.. you're not bricked..
Give me a little more info on what you tried to flash.... as well as what Android version you were on... and if you had or were trying to get cwm recovery on the device via heimdall..
No worries... we'll get ya back up and running... just don't get flash happy and try something until myself or another member can confirm it's right..
I'm going to assume you were following a guide for rooting with heimdall... link that guide so I can look at it..
Click to expand...
Click to collapse
Ok, no more flashing until I hear back from you. Thanks for the reply! I'm actually not sure which version I was on. I know, big mistake.
I initially used this guide goo dot gl/LZt2l3 but I couldn't get the terminal version, so I flashed the kernel via the frontend. It appeared to work, and rebooted, but I was getting a "samsung galaxy s2 gt-i9100" boot screen and then black. So I tried flashing back to a stock kernel I found. Now it shows the right model number, but still goes black.
Thanks again for the reply. Looking forward to getting this mess I made fixed.
Will I be able to fix this with my Mac, or do I need to try to find a Windows machine to use?
jordan8201 said:
Ok, no more flashing until I hear back from you. Thanks for the reply! I'm actually not sure which version I was on. I know, big mistake.
I initially used this guide goo dot gl/LZt2l3 but I couldn't get the terminal version, so I flashed the kernel via the frontend. It appeared to work, and rebooted, but I was getting a "samsung galaxy s2 gt-i9100" boot screen and then black. So I tried flashing back to a stock kernel I found. Now it shows the right model number, but still goes black.
Thanks again for the reply. Looking forward to getting this mess I made fixed.
Click to expand...
Click to collapse
Ok... no worries... as I said.. if you have download mode we can fix this...
You flashed the wrong model and bootloader I believe... so it messed up you're partitions...
What you want to do is Odin a one-click from rwilco's repo...
Give me a few minutes and I'll hunt up the links for you... I'll also link you to a good heimdall guide..
---------- Post added at 10:54 AM ---------- Previous post was at 10:52 AM ----------
jordan8201 said:
Will I be able to fix this with my Mac, or do I need to try to find a Windows machine to use?
Click to expand...
Click to collapse
I always prefer windows... as things tend to go smoother, but we can fix it with you're mac...
Gil81 said:
Ok... no worries... as I said.. if you have download mode we can fix this...
You flashed the wrong model and bootloader I believe... so it messed up you're partitions...
What you want to do is Odin a one-click from rwilco's repo...
Give me a few minutes and I'll hunt up the links for you... I'll also link you to a good heimdall guide..
---------- Post added at 10:54 AM ---------- Previous post was at 10:52 AM ----------
I always prefer windows... as things tend to go smoother, but we can fix it with you're mac...
Click to expand...
Click to collapse
Thanks, man. Am I correct that Heimdall is the Mac version of Odin?
@jordan8201
Here is the link to rwilco's repo... http://forum.xda-developers.com/showthread.php?t=1903252
Go to it and download the gb27( if you're on sprint)...gb28(if you're on virgin)....if you're on boost you can download the boost one-click or use the sprint one..
I'll be back in a few with a link to a heimdall guide that I know works...
---------- Post added at 11:10 AM ---------- Previous post was at 11:02 AM ----------
jordan8201 said:
Thanks, man. Am I correct that Heimdall is the Mac version of Odin?
Click to expand...
Click to collapse
Yes... that's about the size of... but heimdall is it's own software.. it can be used on windows as well...
The guide I want to find will explain it really well...
Gil81 said:
@jordan8201
Here is the link to rwilco's repo... http://forum.xda-developers.com/showthread.php?t=1903252
Go to it and download the gb27( if you're on sprint)...gb28(if you're on virgin)....if you're on boost you can download the boost one-click or use the sprint one..
I'll be back in a few with a link to a heimdall guide that I know works...
Click to expand...
Click to collapse
I actually already have those files. I think that was the last thing I tried flashing to fix things, but I was unsuccessful. I actually download two different files, so I have the following two:
2) Download the GB27 One-Click self-extractor of choice
SPH-D710_GB27_1014481_Stock_Restore.exe [Mirror1] (RESET user data) (md5: 97d005f03621dc6b779d0a5b69cad301)
SPH-D710_GB27_1014481_Rooted_Restore.exe [Mirror1] (RESET user data) (md5: 5a61f86b52be8d6808d0e293dbb23e4c)
jordan8201 said:
I actually already have those files. I think that was the last thing I tried flashing to fix things, but I was unsuccessful. I actually download two different files, so I have the following two:
2) Download the GB27 One-Click self-extractor of choice
SPH-D710_GB27_1014481_Stock_Restore.exe [Mirror1] (RESET user data) (md5: 97d005f03621dc6b779d0a5b69cad301)
SPH-D710_GB27_1014481_Rooted_Restore.exe [Mirror1] (RESET user data) (md5: 5a61f86b52be8d6808d0e293dbb23e4c)
Click to expand...
Click to collapse
Ok... read through this guide and see if it tells you anymore info.. http://forum.xda-developers.com/showthread.php?t=878686
If you followed the protocol for flashing with heimdall correctly and still have issues... we might need to use Odin...
As you have flashed the wrong firmware.. I believe you will need to repartition when you flash..
Let me know... I'll be on xda.. all day, until we get you up and running...
Gil81 said:
Ok... read through this guide and see if it tells you anymore info.. http://forum.xda-developers.com/showthread.php?t=878686
If you followed the protocol for flashing with heimdall correctly and still have issues... we might need to use Odin...
As you have flashed the wrong firmware.. I believe you will need to repartition when you flash..
Let me know... I'll be on xda.. all day, until we get you up and running...
Click to expand...
Click to collapse
Thanks, you're awesome. Of those two files, should I use the stock or the rooted version?
A couple of things I didn't see in the tutorial:
1) How to repartition (assuming I need to), and
2) Which files to flash. I have a lot more files than listed in the tutorial, so should I try to flash them all?
jordan8201 said:
Thanks, you're awesome. Of those two files, should I use the stock or the rooted version?
Click to expand...
Click to collapse
That is up to you... the rooted version just has the binaries for root and a super user app.. I would try the rooted version... so after you can use mobile Odin to flash, instead of heimdall..
I have a guide for mobile Odin I put together for another member I can link you to... but let's get ya back up first...
---------- Post added at 11:36 AM ---------- Previous post was at 11:35 AM ----------
jordan8201 said:
A couple of things I didn't see in the tutorial:
1) How to repartition (assuming I need to), and
2) Which files to flash. I have a lot more files than listed in the tutorial, so should I try to flash them all?
Click to expand...
Click to collapse
Let me look real quick...
Gil81 said:
That is up to you... the rooted version just has the binaries for root and a super user app.. I would try the rooted version... so after you can use mobile Odin to flash, instead of heimdall..
I have a guide for mobile Odin I put together for another member I can link you to... but let's get ya back up first...
---------- Post added at 11:36 AM ---------- Previous post was at 11:35 AM ----------
Let me look real quick...
Click to expand...
Click to collapse
When I add my .pit file, there is a check box for repartition. Is that what I should use?
jordan8201 said:
A couple of things I didn't see in the tutorial:
1) How to repartition (assuming I need to), and
2) Which files to flash. I have a lot more files than listed in the tutorial, so should I try to flash them all?
Click to expand...
Click to collapse
Here is a guide.. explaining how to use a one-click for Odin and package it for heimdall... http://forum.xda-developers.com/showthread.php?t=1348392
See if that makes sense to you... and I'll look around to make sure nothing newer is out that might be easier..
---------- Post added at 11:44 AM ---------- Previous post was at 11:43 AM ----------
jordan8201 said:
When I add my .pit file, there is a check box for repartition. Is that what I should use?
Click to expand...
Click to collapse
Yes... I believe so... but let me read a little more.... it's been awhile since I used heimdall..
Gil81 said:
Here is a guide.. explaining how to use a one-click for Odin and package it for heimdall... http://forum.xda-developers.com/showthread.php?t=1348392
See if that makes sense to you... and I'll look around to make sure nothing newer is out that might be easier..
---------- Post added at 11:44 AM ---------- Previous post was at 11:43 AM ----------
Yes... I believe so... but let me read a little more.... it's been awhile since I used heimdall..
Click to expand...
Click to collapse
The Heimdall one click method does not seem to support the file type that I downloaded for some reason. I can use the regular Heimdall frontend app though. Then, should I just flash all the extracted files? There are 10 or so of them.
jordan8201 said:
When I add my .pit file, there is a check box for repartition. Is that what I should use?
Click to expand...
Click to collapse
Ok man... this is the guide I wanted to find for ya... http://www.teambamf.net/topic/2090-guide-flashing-with-heimdall-borrowed-from-daenney/
Sorry it took so long... I'm off work and my 2 yr old little boy is trying to give me a stroke today... lol..
---------- Post added at 12:18 PM ---------- Previous post was at 12:13 PM ----------
jordan8201 said:
The Heimdall one click method does not seem to support the file type that I downloaded for some reason. I can use the regular Heimdall frontend app though. Then, should I just flash all the extracted files? There are 10 or so of them.
Click to expand...
Click to collapse
Just seen this post... you Ninja'd me... lol
Read that last guide I linked...
I think you can flash all of them or just a select few... but if you can get a custom recovery on at the least... we can boot to it...push a couple zip's over and flash a rom from a safe recovery.... I'll explain more for that if we have to go that route..
---------- Post added at 12:26 PM ---------- Previous post was at 12:18 PM ----------
@jordan8201
I gave ya you're first Thanks....
I couldn't stand to look at that zero anymore...lol. I'd give ya another but you only get 8 a day.. and I'm tapped out already..
Let me know how it's going, when you get a chance...
Okay, I think I have good news to report. I'm booting now...basically. It's staying on the 4G screen for a long time, but eventually boots. Well, at least the first time it did. I just tried again and it stuck on the 4G screen.
I can still get into recovery though. Should I try flashing a custom recovery using Heimdall? If so, where can I get a compatible recovery?
Progress is good! Thanks!
jordan8201 said:
Okay, I think I have good news to report. I'm booting now...basically. It's staying on the 4G screen for a long time, but eventually boots. Well, at least the first time it did. I just tried again and it stuck on the 4G screen.
I can still get into recovery though. Should I try flashing a custom recovery using Heimdall? If so, where can I get a compatible recovery?
Progress is good! Thanks!
Click to expand...
Click to collapse
Did you use the rooted rom... if so.. I would try to go into recovery and wipe cache and reboot to see if it boots up... also.. is it stock recovery, I can't remember what that one click comes with...
If it's stock and we can't get it to boot... then we will have to heimdall a kernel/recovery..remember our recoveries and kernel's are tied together on this device...
If this is the case.. I think we can find you a custom recovery/kernel and heimdall it and then flash a rom from it... after you push the zip's to you're internal storage..
Gil81 said:
Did you use the rooted rom... if so.. I would try to go into recovery and wipe cache and reboot to see if it boots up... also.. is it stock recovery, I can't remember what that one click comes with...
If it's stock and we can't get it to boot... then we will have to heimdall a kernel/recovery..remember our recoveries and kernel's are tied together on this device...
If this is the case.. I think we can find you a custom recovery/kernel and heimdall it and then flash a rom from it... after you push the zip's to you're internal storage..
Click to expand...
Click to collapse
I did use the rooted files. I'm not sure if it's stock recovery, but it looks like it. Definitely not CWM.
I tried wiping cache and rebooting, but it's still looping.
jordan8201 said:
I did use the rooted files. I'm not sure if it's stock recovery, but it looks like it. Definitely not CWM.
I tried wiping cache and rebooting, but it's still looping.
Click to expand...
Click to collapse
Ok... I would go to rwilco's repo and get a gb27 kernel that has a custom recovery and flash it with heimdall..
Even if it doesn't boot.. we can atleast push a rom zip and gapps to you're phone and the el26 kernel(safe kernel for flashing) and then flash the rom/gapps from it..
I can look and point you to the right kernel if you're not comfortable looking yourself..
Hi, guys.
My SM-N910P (OB7) just downloaded update - 276.98 MB.
I still do not want to be update yet.
Tell me, please, the location of the update file.
I want to copy it to computer.
Dont take the update youll be sorry
I do not want to be updated.
I want to find where the update file is loaded into the phone - where it is.
Cant get it wothour root access
Thank, but I have root access. And I have Root Explorer too.
Should be in the cache folder
Cool upload the oe1 recovery to sav us all !!
In the folder "Cache" no update file..
Search for "Update.zip" is my other guess. I use ES file explorer and am not sure on the root explorer features but with ES I believe I have to have show hidden files enabled to see secret stuff. Maybe the same with the update?
Thanks to all.
I figured out where the lost file update.zip.
CF-AutoRoot cleared FOTA folder in the folder CACHE.
spinxus said:
Thanks to all.
I figured out where the lost file update.zip.
CF-AutoRoot cleared FOTA folder in the folder CACHE.
Click to expand...
Click to collapse
Any chance you could flash back to stock, download the the update again, pull it off your phone with adb and then reroot?
Many of us would be eternally grateful to get a copy.
DreamingWolf said:
Any chance you could flash back to stock, download the the update again, pull it off your phone with adb and then reroot?
Many of us would be eternally grateful to get a copy.
Click to expand...
Click to collapse
Some people need a copy?
I put it here.
There's a strange format archive, I was able to unpack in part by the latest version of 7-zip.
I saw that patched nearly all system applications.
..
Someone can explain to me why all regret that update to OE1?
Custom firmware does not interest me.
DreamingWolf said:
Any chance you could flash back to stock, download the the update again, pull it off your phone with adb and then reroot?
Many of us would be eternally grateful to get a copy.
Click to expand...
Click to collapse
Sitting here on fresh Stock OB7 with update downloaded... can't find it with ADB.
tried ADB pull /cache/fota/update.zip Does not exist
tried ADB pull /cache/update.zip Does not exist
tried all I could think of.... does not exist...
Yes, ADB DOES recognize my device...
I've been out of commission for a couple weeks, would have thought this was handled by now.
See anything wrong with my syntax?
spinxus said:
Some people need a copy?
I put it here.
There's a strange format archive, I was able to unpack in part by the latest version of 7-zip.
I saw that patched nearly all system applications.
..
Someone can explain to me why all regret that update to OE1?
Custom firmware does not interest me.
Click to expand...
Click to collapse
what was the location of your adb pull?
---------- Post added at 02:17 PM ---------- Previous post was at 02:15 PM ----------
jhill110 said:
Sitting here on fresh Stock OB7 with update downloaded... can't find it with ADB.
tried ADB pull /cache/fota/update.zip Does not exist
tried ADB pull /cache/update.zip Does not exist
tried all I could think of.... does not exist...
Yes, ADB DOES recognize my device...
I've been out of commission for a couple weeks, would have thought this was handled by now.
See anything wrong with my syntax?
Click to expand...
Click to collapse
in the same boat as you. was gonna do it last night but prior obligations foiled that plan. even though its been posted, i was trying to pull it myself before coming here to see that its been posted already... still curious of the remote location though since i went back to OB7 for the sole purpose of pulling it.
xxSTARBUCKSxx said:
what was the location of your adb pull?
---------- Post added at 02:17 PM ---------- Previous post was at 02:15 PM ----------
in the same boat as you. was gonna do it last night but prior obligations foiled that plan. even though its been posted, i was trying to pull it myself before coming here to see that its been posted already... still curious of the remote location though since i went back to OB7 for the sole purpose of pulling it.
Click to expand...
Click to collapse
Something wrong/different with the above linked file... I guess. I can't open it to extract the stock OE1 recovery.
Downloaded it 4 times. Maybe I'm just a little "slow".
EDIT: Managed to pull it off my phone... for whatever it's worth.
xxSTARBUCKSxx said:
what was the location of your adb pull?
Click to expand...
Click to collapse
I not used adb.
I reflash odin OB7, download OTA update again, phone off, flash odin TWPR, download in TWPR and copy update.zip from /cache/fota to externalSD.
Mirror - OE1 update.zip on Mega.
Thanks for the reply. The reason a lot of people dont want the OE1 update is because of the limitations it puts on your phone. Cant use Odin in certain areas and also cant go back, from what i understood, limiting ones customization and tinkering abilities.
ewww @ mega.... ill pass and stick with the original, but thanks
@jhill110 you aint slowwwwwww, this entire OE1 has been nothing but hell from the start.
---------- Post added at 02:50 PM ---------- Previous post was at 02:38 PM ----------
spinxus said:
I not used adb.
I reflash odin OB7, download OTA update again, phone off, flash odin TWPR, download in TWPR and copy update.zip from /cache/fota to externalSD.
Mirror - OE1 update.zip on Mega.
Click to expand...
Click to collapse
whats up with the locked zip file. ????
jhill110 said:
Something wrong/different with the above linked file... I guess. I can't open it to extract the stock OE1 recovery.
Downloaded it 4 times. Maybe I'm just a little "slow".
Click to expand...
Click to collapse
This update is not available stock OE1 recovery.
OB7 recovery is patched to OE1 recovery.
I wrote that the archive has a strange format, and I was able to unpack his part with errors only with the latest version of 7-zip.
I attached update-script from this update.
Added SHA1.
Added screens about recovery.
Yup, those are the only 2 files in the recovery folder via the update.zip
Both files
Downloaded the update. Guess it's good to have. Might need it for fixing up the firmware I modded to get next update. Or not. Lol
Sent from my SM-N910P using XDA Free mobile app
I may have gotten a little too overzealous and tried flashing a custom recovery (TWRP) before really researching if I had a locked bootloader first.
I'm sure I can reflash in Odin but I need the official firmware to do it.
Unfortunately nobody seems to have uploaded it anywhere.
Would anyone be able to upload it here?
have you tried this site? http://live.samsung-updates.com/index.php?device=SM-T807T
You only need the recovery.
If you can get into download mode, get someone to pull the image and then tar it up.
In fact I have the recovery from a t805, you could try that.
However seeing as these images won't be signed they may not flash.
I'm surprised odin didn't fail to flash a non signed image or did you flash it some other way?
You could also try kies/smart switch it has a firmware recovery mode.
---------- Post added at 09:23 AM ---------- Previous post was at 09:20 AM ----------
Soapm said:
have you tried this site? http://live.samsung-updates.com/index.php?device=SM-T807T
Click to expand...
Click to collapse
Unfortunately there are no t807a firmwares available.
ashyx said:
You only need the recovery.
If you can get into download mode, get someone to pull the image and then tar it up.
In fact I have the recovery from a t805, you could try that.
However seeing as these images won't be signed they may not flash.
I'm surprised odin didn't fail to flash a non signed image or did you flash it some other way?
You could also try kies/smart switch it has a firmware recovery mode.
---------- Post added at 09:23 AM ---------- Previous post was at 09:20 AM ----------
Unfortunately there are no t807a firmwares available.
Click to expand...
Click to collapse
Well I already tried flashing the T805 recovery which, unfortunately, failed.
I also tried Kies and Smart Switch; Kies kept asking to check my model name and enter it, Smart Switch crashes after entering my S/N.
I've called Samsung Support, and they told me to take it to Best Buy to reflash it.
SirAristocat said:
I've called Samsung Support, and they told me to take it to Best Buy to reflash it.
Click to expand...
Click to collapse
I'm in the same boat. Flashing TWRP recovery tripped Knox on my t807a, so Best Buy wouldn't reflash it for me. Any luck for you?
I'm on Linux trying to use Heimdall rather than Odin, which isn't working for me. But you might try flashing the factory recovery.img I uploaded here.
godzilla8nj said:
I'm in the same boat. Flashing TWRP recovery tripped Knox on my t807a, so Best Buy wouldn't reflash it for me. Any luck for you?
Click to expand...
Click to collapse
Did twrp successfully flash with odin even though it wont boot and can you still get download mode?
ashyx said:
Did twrp successfully flash with odin even though it wont boot and can you still get download mode?
Click to expand...
Click to collapse
I initially flashed TWRP with Heimdall. Since then I have been unable to use Heimdall to try flashing the stock recovery I linked. Not sure if that's a Heimdall issue, related to tripping Knox, or something else.
godzilla8nj said:
I initially flashed TWRP with Heimdall. Since then I have been unable to use Heimdall to try flashing the stock recovery I linked. Not sure if that's a Heimdall issue, related to tripping Knox, or something else.
Click to expand...
Click to collapse
Heimdall, Linux or Windows?
Not sure how you managed to flash twrp with it as it doesn't even work with the Tab S. :what:
Where is the recovery you posted?
ashyx said:
Heimdall, Linux or Windows?
Not sure how you managed to flash twrp with it as it doesn't even work with the Tab S. :what:
Click to expand...
Click to collapse
Linux. I used the TWRP posted here for T805/T807.
ashyx said:
Where is the recovery you posted?
Click to expand...
Click to collapse
Here is the stock recovery image I uploaded.
godzilla8nj said:
Linux. I used the TWRP posted here for T805/T807.
Here is the stock recovery image I uploaded.
Click to expand...
Click to collapse
I mean Heimdall doesn't work with the Tab S.
ashyx said:
I mean Heimdall doesn't work with the Tab S.
Click to expand...
Click to collapse
I don't recall having to do anything special to get Heimdall to work. Downloaded and installed the latest for Ubuntu off GitHub. All I did was
Code:
sudo heimdall flash --recovery recovery.img
And as simple as that :good: bricked T807a.
godzilla8nj said:
I don't recall having to do anything special to get Heimdall to work. Downloaded and installed the latest for Ubuntu off GitHub. All I did was
Code:
sudo heimdall flash --recovery recovery.img
And as simple as that :good: bricked T807a.
Click to expand...
Click to collapse
Didn't you know you can't flash an unsigned bootloader, kernel or recovery on a bootloader locked device?
ashyx said:
Didn't you know you can't flash an unsigned bootloader, kernel or recovery on a bootloader locked device?
Click to expand...
Click to collapse
Honestly it's the first time I've had to deal with a bootloader-locked device. Never again.
Merry early Xmas everyone!
Here's the official odin tar file to upgrade your phone to MM 6.0
Enjoy and don't forget to thank me !:fingers-crossed:
DOWNLOAD
Sunderwear said:
Merry early Xmas everyone!
Here's the official odin tar file to upgrade your phone to MM 6.0
Enjoy and don't forget to thank me !:fingers-crossed:
DOWNLOAD
Click to expand...
Click to collapse
Goung to download and see if this works
I can now confirm that it works,
Used Odin 3.10.6, Failed the first time ( i should of known better) used original cable and passed 2 time. After it reboots, the first time it may reboot a few more times. Downloading my apps now, oh and just to reconfirm that the OP said this TAR DOES delete everything. Thank you again @Sunderwear
Great! Updated.
Worked.
Thanks!
definitely works your are awesome..thanks for this christmas present..
Been on it since yesterday, so far I've rooted, Xposed
You already rooted? How
---------- Post added at 11:51 AM ---------- Previous post was at 11:01 AM ----------
Please lost my tethering option..different menu on phone to set up this mod.. help please..
borgx76 said:
You already rooted? How
---------- Post added at 11:51 AM ---------- Previous post was at 11:01 AM ----------
Please lost my tethering option..different menu on phone to set up this mod.. help please..
Click to expand...
Click to collapse
I'm at work now, but if he'd over to the Sprint Galaxy Note 5 area in general they have a Post on the the MM release. Go to post 50. I used those files TWRP and SU and can confirm they work. http://forum.xda-developers.com/showthread.php?p=65989300
Beandip-Javier said:
I'm at work now, but if he'd over to the Sprint Galaxy Note 5 area in general they have a Post on the the MM release. Go to post 50. I used those files TWRP and SU and can confirm they work. http://forum.xda-developers.com/showthread.php?p=65989300
Click to expand...
Click to collapse
OK but where you get those 2 files?
---------- Post added at 02:26 PM ---------- Previous post was at 02:19 PM ----------
Beandip-Javier said:
I'm at work now, but if he'd over to the Sprint Galaxy Note 5 area in general they have a Post on the the MM release. Go to post 50. I used those files TWRP and SU and can confirm they work. http://forum.xda-developers.com/showthread.php?p=65989300
Click to expand...
Click to collapse
Ok just flash twrp with odin? And install supersu like a apk right?
I did a search for them via Google, I will add them to my drop box in a few.
Flash TWRP via Odin
- Boot back into recovery and flash the SU zip.
Ok thank you so much much my friend
borgx76 said:
Ok thank you so much much my friend
Click to expand...
Click to collapse
Here's the link, just keep in mind these files worked for ME. You doing this at your own risk, blah blah blah. Within the folder I have all files for TWRP,SU, XPOSED. I gathered these via Google so thank you to those involved in putting them together.
I lost access to my contact list via bluetooth with this?
For some dang reason my phone sits on the splash screen and never enters recovery. I have in red @ the top of the screen saying "RECOVERY IS NOT SEANDROID ENFORCING" Anyone else see this ?
My Note 4 went w/o hitch
benny3 said:
For some dang reason my phone sits on the splash screen and never enters recovery. I have in red @ the top of the screen saying "RECOVERY IS NOT SEANDROID ENFORCING" Anyone else see this ?
My Note 4 went w/o hitch
Click to expand...
Click to collapse
yes. i'm having the same issue at this very moment and seem to be soft-bricked at the moment. won't boot past the logo screen...
lostsoul77 said:
yes. i'm having the same issue at this very moment and seem to be soft-bricked at the moment. won't boot past the logo screen...
Click to expand...
Click to collapse
You'll have to flash the stock tar again. Use this recovery it worked for me...TWRP_3.0.0.1_Android_6.0_M_Only
benny3 said:
You'll have to flash the stock tar again. Use this recovery it worked for me...TWRP_3.0.0.1_Android_6.0_M_Only
Click to expand...
Click to collapse
Thats the one i used....still get that message if i reflash stock tar and the twrp files...causing me security issues with a few apps
lostsoul77 said:
Thats the one i used....still get that message if i reflash stock tar and the twrp files...causing me security issues with a few apps
Click to expand...
Click to collapse
After flashing TWRP 3.0.0.1 , Are you going back into recovery and flashing BETA SUPERSU V2.68
Beandip-Javier said:
After flashing TWRP 3.0.0.1 , Are you going back into recovery and flashing BETA SUPERSU V2.68
Click to expand...
Click to collapse
No. I flashed MM-zenltespr-smn928p.tar file to get root and SU binary. Then i flashed the TWRP file
---------- Post added at 11:35 AM ---------- Previous post was at 11:29 AM ----------
Getting no server response error and unable to semd MMS
lostsoul77 said:
No. I flashed MM-zenltespr-smn928p.tar file to get root and SU binary. Then i flashed the TWRP file
Click to expand...
Click to collapse
Here's how I rooted mine with no issues so far.
MAKE SURE THAT IN DEVELOPER OPTIONS YOU HAVE OEM UNLOCK USB DEBUGGING ON BEFORE FLASHING TWRP.
Flashed
a - TWRP 3.0.0.1-M
b - boot back into recovery (TWRP) and flash BETA SuperSU v2.68
after you do this reboot your phone to make sure things are good.
I then went back to recovery and flashed the Xposed zip and boot back into phone and install Xposed APK.
if you have the time flash the no wipe tar and try my method, check your PM shortly going to send you a link to my drop box where i have all the files needed in one place.
-Beandip-javier
Some people just post info and never post links . I had firmware for sometime already but i was waiting for other guy to post it. I know we all looking for full Odin files so here they are :
AP_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship_meta.tar
CSC_ATT_N920AATT4EQC6_CL10809541_QB12921033_REV00_use r_low_ship.tar
CP_N920AUCU4EQC6_CP6021124_CL10809541_QB12921033_REV 00_user_low_ship.tar
BL_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship.tar
Download Link of :
Nougat_N920AUCU4EQC6_Odin_Files
All this files are in one zip. Unzip and put this in appropriate windows in ODIN.
Here are Odin 3.12.3
Good Luck.
Of course, this will wipe my device again, even though I do not select the CSC?
If you allow it to flash a new system and user data image then yes.
You basically need a wipe anyways going from MM to Nougat.
Sent from my Galaxy Note5 using XDA Labs
I'm already on Nougat N920AUCU4EQC5. I'm just trying to avoid having to wipe my phone
When i use this. It passes Odin then when the phone tries to reboot and install the update it says deleting then im back to 6.0.1. Any idea why?
norbarb said:
Some people just post info and never post links . I had firmware for sometime already but i was waiting for other guy to post it. I know we all looking for full Odin files so here they are :
AP_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship_meta.tar
CSC_ATT_N920AATT4EQC6_CL10809541_QB12921033_REV00_use r_low_ship.tar
CP_N920AUCU4EQC6_CP6021124_CL10809541_QB12921033_REV 00_user_low_ship.tar
BL_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship.tar
Download Link of :
Nougat_N920AUCU4EQC6_Odin_Files
All this files are in one zip. Unzip and put this in appropriate windows in ODIN.
Good Luck.
Click to expand...
Click to collapse
thank you very much for the link, bro.. i'm already Nougated now. experiencing some blue screen, but when i'm using newest odin.. all fixed.. thx again, man, you are the best.
DuganNash said:
When i use this. It passes Odin then when the phone tries to reboot and install the update it says deleting then im back to 6.0.1. Any idea why?
Click to expand...
Click to collapse
You may use wrong odin, some security installed on your phone, What build are you on?
norbarb said:
You may use wrong odin, some security installed on your phone, What build are you on?
Click to expand...
Click to collapse
It is Odin 3.12 run as admin. it gives me the green pass, then bootloader rolls back to MM
I am on build QB2 as of now.
DuganNash said:
It is Odin 3.12 run as admin. it gives me the green pass, then bootloader rolls back to MM
I am on build QB2 as of now.
Click to expand...
Click to collapse
Can you post your about phone screen ?
norbarb said:
Can you post your about phone screen ?
Click to expand...
Click to collapse
here you go, thank you
DuganNash said:
here you go, thank you
Click to expand...
Click to collapse
Thanks. Ok. Do you have any security like any kind encryption installed on your phone ?
I update first post with newest ODIN. Are you unzipping file you download and put tar files in correct windows? Are you in Download mode when using ODIN ?
norbarb said:
Thanks. Ok. Do you have any security like any kind encryption installed on your phone ?
I update first post with newest ODIN. Are you unzipping file you download and put tar files in correct windows? Are you in Download mode when using ODIN ?
Click to expand...
Click to collapse
I'm not sure about security . It was a stock at note 5 until I tried updated to qb2. All dev factors are turned on, and the rar files are all unzipped and loaded through odin in download mode. It passes then the android update screen (the little robot ) says erasing upon revoot and I boot into mm again
DuganNash said:
I'm not sure about security . It was a stock at note 5 until I tried updated to qb2. All dev factors are turned on, and the rar files are all unzipped and loaded through odin in download mode. It passes then the android update screen (the little robot ) says erasing upon revoot and I boot into mm again
Click to expand...
Click to collapse
OK. Try this , After you unzip from one zip to 4 files , unzip all 4 files to tar.md5 and try ODIN again. Check for any encryption installed on your phone preventing bootloader from overwriting files.
norbarb said:
OK. Try this , After you unzip from one zip to 4 files , unzip all 4 files to tar.md5 and try ODIN again. Check for any encryption installed on your phone preventing bootloader from overwriting files.
Click to expand...
Click to collapse
i tried this after making sure the phone was not encrypted under the security setting. Same result unfortunately. am looking for alternatives
You're the man !! just the files Odin I was looking for. I want to marry with you ... make me a son jajaja
DuganNash said:
i tried this after making sure the phone was not encrypted under the security setting. Same result unfortunately. am looking for alternatives
Click to expand...
Click to collapse
You have to necessarily erase the security lock fingerprints, you also have to remove the password lock, you have not any type of security lock, then you have to enable developer options and type USB debugging(This last one I do not know if it is strictly necessary, but just in case)If you have some security lock on your phone, even if you pray, you will not be able to!
After update installation it is sayin(device didn't have DRK,please install DRK first)
Please help me
Thanks
TaimooR Khawaja said:
After update installation it is sayin(device didn't have DRK,please install DRK first)
Please help me
Thanks
Click to expand...
Click to collapse
What did you flash before this stock firmware?
DRK=device root key
Clicking from Edge of Galaxy
Just a thought, can you Odin flash any other version of the official AT&T firmware? Maybe try another version to see if the phone is truly screwed.
Also, have you tried a factory reset on the phone first. Maybe something (anything) loaded on the phone is preventing the Odin flash. I know this shouldn't matter but it's worth a try.
mattern1974 said:
Just a thought, can you Odin flash any other version of the official AT&T firmware? Maybe try another version to see if the phone is truly screwed.
Also, have you tried a factory reset on the phone first. Maybe something (anything) loaded on the phone is preventing the Odin flash. I know this shouldn't matter but it's worth a try.
Click to expand...
Click to collapse
Same here.. i try to flash it via odin v3.12 it showing pass message..
After reboot my phone still on MM 6.0.1