Hi all,
I"m new here, with a quick question based on my usage today on both the Bell and Rogers network.
I unlocked my HTC Desire Z this afternoon, and I tried it out on Rogers to see what the speeds were like. It has been an odd experience. Here's the background, and my question is below.
Background:
- Aside from being unlocked, it is as originally shipped from Bell (e.g. no root access, ROM hasn't been flashed etc.)
- APN settings were taken from Rogers' own website (e.g. using rogers-core-appl1.apn).
- Speeds tested in downtown Toronto.
Experience so far:
Bell
I get a solid HSDPA indicator all the time (save elevators etc., when there is no connection). I can remember seeing a 3G connection icon perhaps once on Bell since I got it last week. Speeds are very good, four to five bars most of the time
Rogers
I get a solid 3G icon almost all of the time, except when I'm using data, in which case it seems to switch over to the HSDPA icon. Literally, it will show a 3G, and then if I try to browse the web, the icon will immediately switch to an H from a 3G and the web page will load quite quickly.
I was concerned that it was dropping the HSDPA connection frequently, and using 3G instead -- changing towers constantly. So I tried speedtesting it. The results were completely opposite what I expected.
Speedtest Results:
Using the Speedtest.net app (from Ookla) testing against the same Oakville, ON server from Toronto, I'm getting speeds dramatically faster on Rogers. I did three speedtests for each network.
Bell:
Fastest Down: 3411 kbps Fastest Up: 1633 kbps
Slowest Down: 1969 kbps Slowest Up: 1331 kbps
Rogers:
Fastest Down: 5740 kbps Fastest Up: 3766 kbps
Slowest Down: 5405 kbps Slowest Up: 1551 kbps
Ping latency was generally slightly higher on Rogers than Bell.
Question
Does anyone understand why, on Rogers, the Desire Z would be showing a 3G until data is requested, at which time it swaps over to show an H icon (e.g. HSDPA), whereas on Bell, it shows a constant HSDPA connection?
I would have thought that it would be slower on Rogers since it was showing 3G and then the icon switches to H, but I'm guessing that the icon switch isn't really reflecting what's going on, since the speeds are faster when this icon switch occurs. Any ideas?
Many thanks in advance!
TF
Its not just the Desire Z but also most smartphones on rogers. i had a samsung galaxy and it did the same thing. However, (correct me out there, if im wrong) But i remember reading the HSDPA was inbetween 3g and 3.5g?...i dont remmeber but to me i know that Rogers is faster, my brother has a Bell phone and my speeds were always faster.
heres a bit of help i found
HSDPA is actually one of the 3G protocols.
In everyday language HSDPA is often referred to as much faster than (basic) 3G so I would call it much faster as well.
Click to expand...
Click to collapse
jark99 said:
Its not just the Desire Z but also most smartphones on rogers. i had a samsung galaxy and it did the same thing. However, (correct me out there, if im wrong) But i remember reading the HSDPA was inbetween 3g and 3.5g?...i dont remmeber but to me i know that Rogers is faster, my brother has a Bell phone and my speeds were always faster.
Click to expand...
Click to collapse
Not sure there really is a 3.5G as such, but if there is, then HSDPA is it. It provides faster speeds than the standard 3G (UMTS) protocols. There's also HSPA+ coming out, which is even faster. HSPA+ isn't 4G, although confusingly some carriers in the US (T-Mobile I think ?) are referring to it as such.
On O2 in the UK, I get the same effect, holds at 3G then switches to HSDPA when in use. There doesn't seem to be any latency when switching and if it can't achieve HSDPA it remains at 3G. Speedtest returns about 1.5-2 Mbit which is normal.
I can only imagine its a power saving feature as from experience with the Touch Diamond 2 / Touch Pro 2, having HSDPA enabled sucked battery life significantly. I don't remember this happening on those phones either. Seems like a good idea, but would be nice to choose (always on, auto, always off)
I actually used to disable HSDPA and use 3G exclusively and consistently got 2-3 days out of both phones with moderate use. I never missed it.
Craig
craiglay said:
I can only imagine its a power saving feature as from experience with the Touch Diamond 2 / Touch Pro 2, having HSDPA enabled sucked battery life significantly. I don't remember this happening on those phones either. Seems like a good idea, but would be nice to choose (always on, auto, always off)
Click to expand...
Click to collapse
That must be it -- interestingly, I went into the About Phone > Network > Signal Strength menu to check it out. When the icon is showing 3G, the "Mobile network type" is UTMS. When data is being transmitted, the icon immediately switches to H and the "Mobile network type" reports HSDPA.
Very cool -- I'm going to see if this -- by itself -- extends my battery life tomorrow. Thanks for the feedback!
TF
Just FYI -- there has been a dramatic improvement in my battery life on Rogers, compared to what I was experiencing on Bell. Typically, I would be at about 40% battery life left at this point in the day (presumably because I was constantly connected to HSDPA with Bell). Whereas I'm at 80% battery life left with the Rogers 3G connection, and I've still been connected to Wi-Fi for the past five hours and browsing reasonably heavily.
Thanks for your help in sorting this out everybody.
TF
Interesting, as Bell has rolled out several HSPA+ areas, Toronto being one of them, and Rogers still only has HSPA.
What I found odd on my DZ (still on Bells network) is that my Network Mode is GSM / WCDMA auto (never seen this on any other handset I've hand that's been HSDPA) and I understand that the HSDPA networks here are CDMA with a GSM overlay (ie, the need for a SIM card, etc) and I frequently see my icon changing from 3G to H (again, this is only on my DZ), but Bell only has a CDMA EVDO 3G network and the HSPA "3G+" network, there's not really a GSM enabled 3G network.
I'm confused, as on my Telus Milestone, it's constantly H, never once seen 3G appear on it, and Telus and Bell share their network.
Maybe I'm just horribly misinformed.
I donno if it is just me but I seem to be getting ridiculously slow 3G speeds here on my unlocked Desire Z using Rogers. I go to school in Hamilton at McMaster and most of the times the 3G is nigh on unusable because of its speeds. I don't know if it is an app or anything that has caused it because it was never slow when I first got the phone.
I am running the virtuous rom 0.72 atm. I do have half a mind to just factory reset the device adn see if that fixes the issues however I really don't want to lose all of my contacts and other settings that I have on this device.
TravelFiend said:
Rogers
I get a solid 3G icon almost all of the time, except when I'm using data, in which case it seems to switch over to the HSDPA icon. Literally, it will show a 3G, and then if I try to browse the web, the icon will immediately switch to an H from a 3G and the web page will load quite quickly.
Click to expand...
Click to collapse
The same thing happening to me with Galaxy S,and this started a few days ago.
I unlocked my phone and I am using it on Telenor Serbia a and past two weeks it was just H all the time,now it's 3g all the time and when I start browsing it switch to H again and it work well,but why do that,should I be concern?
VladaP85 said:
The same thing happening to me with Galaxy S,and this started a few days ago.
I unlocked my phone and I am using it on Telenor Serbia a and past two weeks it was just H all the time,now it's 3g all the time and when I start browsing it switch to H again and it work well,but why do that,should I be concern?
Click to expand...
Click to collapse
For me on O2 UK, it depends on the area.. Sometimes its solid 3G, sometimes solid H and sometimes 3G when idle, H when in use.. I guess its the base station software / hardware..
Craig
HAK Devil said:
I do have half a mind to just factory reset the device adn see if that fixes the issues however I really don't want to lose all of my contacts and other settings that I have on this device.
Click to expand...
Click to collapse
If you've snyced with google then your contacts will just sync back. And I go to school at Mac as well and usually the speeds are really slow inside any buildings... If i don't have full bars then the speed will be crap, otherwise they are fine. But I am on Fido, not Bell.
Also, I thought that Bell didn't have a 2G GSM network? If that is the case then that could be why only H would be appearing...
craiglay said:
For me on O2 UK, it depends on the area.. Sometimes its solid 3G, sometimes solid H and sometimes 3G when idle, H when in use.. I guess its the base station software / hardware..
Craig
Click to expand...
Click to collapse
But why this start to happen two day ago and not before... Should I call my operator or it's up to my phone. Maybe to do factory reset of change rom...
VladaP85 said:
But why this start to happen two day ago and not before... Should I call my operator or it's up to my phone. Maybe to do factory reset of change rom...
Click to expand...
Click to collapse
It could be anything to be honest.. Your operator could have updated the base station.
It seems the phone is designed to do this probably to save power, HSDPA is battery intensive so having the phone in 3G while in standby probably saves quite a bit of power..
You could try emailing HTC with the question before your operator.
Regards
Craig
TravelFiend said:
Just FYI -- there has been a dramatic improvement in my battery life on Rogers, compared to what I was experiencing on Bell. Typically, I would be at about 40% battery life left at this point in the day (presumably because I was constantly connected to HSDPA with Bell). Whereas I'm at 80% battery life left with the Rogers 3G connection, and I've still been connected to Wi-Fi for the past five hours and browsing reasonably heavily.
Thanks for your help in sorting this out everybody.
TF
Click to expand...
Click to collapse
Have you switched your phone to stay in umts only to get this dramatic battery gain?
craiglay said:
It could be anything to be honest.. Your operator could have updated the base station.
It seems the phone is designed to do this probably to save power, HSDPA is battery intensive so having the phone in 3G while in standby probably saves quite a bit of power..
You could try emailing HTC with the question before your operator.
Regards
Craig
Click to expand...
Click to collapse
My phone is Samsung I9000 Galaxy S So maybe I will email Samsung...
Thanks,
Regards
From my understanding
GSM = 1G
GPRS= 2G = G
EDGE = 2.5G = E
UMTS = 3G = 3G
HSDPA/HSDUPA/HSPA+=3.5G = H
Since Rogers has all the above mentioned transceiver systems you will see that mostly on the Rogers network Android phones tend to stay on UMTS=3G switching to H only when more data throughput is required.
The battery life is much better on UMTS vs HSDPA hence you will get a better battery life on Rogers vs Bell.
Bell only has a HSDPA/HSPA+ network hence you will only see H
I am not claiming to be a 100% on this
Just my 2 cents by putting together 1 and 1
xdjneo said:
GSM = 1G
GPRS= 2G = G
EDGE = 2.5G = E
UMTS = 3G = 3G
HSDPA/HSDUPA/HSPA+=3.5G = H
Since Rogers has all the above mentioned transceiver systems you will see that mostly on the Rogers network Android phones tend to stay on UMTS=3G switching to H only when more data throughput is required.
The battery life is much better on UMTS vs HSDPA hence you will get a better battery life on Rogers vs Bell.
Bell only has a HSDPA/HSPA+ network hence you will only see H
I am not claiming to be a 100% on this
Just my 2 cents by putting together 1 and 1
Click to expand...
Click to collapse
Nearly there (source Wikipedia),
GSM is 2G
GPRS is 2.5G
EDGE is 2.75G
UTMS is 3G
HSxPA is 3.5G
I would put HSPA+ as 3.75G as its slightly different to HSxPA but would settle for 3.5G
Broadly speaking battery life reduces the higher the generation but I think UTMS can be more efficient than 2.xG sometimes. (NOT HS... which is generally terrible all over hence the behaviour between 3G and H)
I always used to disable HSxPA because of the battery life, its just not easy on this phone. It requires root and editing a prop file..
Craig
I purchased an ATT LG g3 and I still think it's great despite having a download speed of .5 mbps and an upload speed if 1.1 mbps ...
I called tech support but they weren't very useful so I was hoping you guys would be.
Any help would be appreciated.
Crypto66 said:
I purchased an ATT LG g3 and I still think it's great despite having a download speed of .5 mbps and an upload speed if 1.1 mbps ...
I called tech support but they weren't very useful so I was hoping you guys would be.
Any help would be appreciated.
Click to expand...
Click to collapse
Does it say LTE? It could just be that att sucks were you are. For it it will say I have LTE but my speeds will be just as slow. Its a network issue not necessarily a phone issue.
Pilz said:
Does it say LTE? It could just be that att sucks were you are. For it it will say I have LTE but my speeds will be just as slow. Its a network issue not necessarily a phone issue.
Click to expand...
Click to collapse
It says 4g LTE in the status bar. I've had ATT service before on an HTC one X where I could fetch 8-12 mbps. The support lady was very nice and said something about maintenance and other calls but I was unsure if maybe it was an isolated issue or not.
LG G3 on AT&T slow data connections
I have the same issue. My phone is about 1 month old, previously I had a Blackberry Z30 Unlocked and connection was way better, even with 2 bars I could use Pandora all day at work and could connect to apps, and websites. Now on LG G3 even Google Play won't connect many times as it times out because connection is too slow. I think there is an issue with the way LG G3 connects to AT&T, I mean how can an unsupported device like Blackberry Z30 (bought it on Blackberry site as AT&T doesn't sell it) work very well and yet LG G3, sold by AT&T doesn't work well.
PS : I get 4G and some occasional LTE, but still speed is pretty slow and device consumes the battery pretty quickly.
Recently acquired an unlocked D851. which I m using on the AIS network in Thailand. I am curios if it is normal for it to show 4G when I am actually connected to an HSPDA network? Every other phone I have used would display an H or H+.
Does the D851 support 4G networks running on the 1800 MHz band? It never connects to an actual 4G connection on the AIS network.
Thank you!
I use lg g3 D855 non rooted phone from last year. I have restart problem and I bye new battery and problem solve but I face a new one.
The battery over in just 4 or 5 hour, I m surprise
When I go to in setting/ battery/ uses of battery and I saw a maximum uses of Android system. It is about between 50 to 70 % .
Anybody idea how fix it.....
ketan- said:
I use lg g3 D855 non rooted phone from last year. I have restart problem and I bye new battery and problem solve but I face a new one.
The battery over in just 4 or 5 hour, I m surprise
When I go to in setting/ battery/ uses of battery and I saw a maximum uses of Android system. It is about between 50 to 70 % .
Anybody idea how fix it.....
Click to expand...
Click to collapse
You are hijacking my topic.