Develop Bugs

●●[ROOTED][GUIDE]Wifi Reverse teTher-Windows and Ubuntu-Ad hoc Networks●●

●●[ROOTED][GUIDE]Wifi Reverse teTher-Windows and Ubuntu-Ad hoc Networks●●
This guide teaches you to reverse tether your Android phone via WiFi. That is, it allows you to use your Ethernet connection of PC on your Android phone. It is useful for those who do not have WiFi routers and data connection. So if you have unlimited data plan for your computer, why not share the connection with your phone?
I am not the developer of the files supplied
Requirements:-
1.Rooted Phone
2.Wifi enabled Laptop or PC
3.Root explorer or any other application which gives system access
4.File in the attachement
Procedure :-
Phone:
Download Wpa_supplicant.zip and extract "wpa_supplicant" from it, save it on your SD card.
Open Root Explorer, and grant it superuser access when asked for.
Navigate to system -> bin and long press on wpa_supplicant; Select copy, and paste the file into any folder on your SD card.
Now navigate to the file you downloaded, copy it in same way, and paste it back to system -> bin. Note, you might need to mount the system as R/W instead of R/O by pressing a button on the top just before pasting the file.
Reboot.
▬▬Ubuntu (Must work for other Linux Distros too)▬▬:
Open Network Connections
Goto Wireless tab, select add, and set the following:
SSID: <Any_name_you_like>
Mode: Ad hoc
Leave other things unchanged, and go to Ipv4 settings tab
Set method to Shared to other computers
Go to Wireless security tab and set Security to WEP 40/128 bit key and set key to a numeric password (or hexadecimal one).
Check the connect automatically box on top of the tabs and press Save.
Your Android phone must now detect this network, and you can establish the connection by using your security key.
▬▬Windows XP, Vista, 7▬▬
Download and Install Connectify from www . connectify.me/download-lite/
Start Connectify Hotspot by giving a name and password to your hotspot and selecting the Ethernet connection to share. Make sure the security type is WEP or Open.
Disable your firewall (Simply adding it to exceptions doesn't work for AVG at least)
Now your phone should be able to see the hotspot and establish the connection using the password set.
Known Issues :
1.Random disconnections (Very less frequency)
2.Disconnections due to screen lock / sleep on laptop
3.For me Security mode does not works
HIT THANKS IF IT WORKED
ENJOY

I wasn't able to make it work...Wi-fi doesn't want to connect

VavanL said:
I wasn't able to make it work...Wi-fi doesn't want to connect
Click to expand...
Click to collapse
Have you placed that file in system/bin ???

working like a charm ^^
but i dont need it so ...
Sent from my GT-S5660 using XDA

avilove4u said:
Have you placed that file in system/bin ???
Click to expand...
Click to collapse
of course. I can read English letters
Maybe I forgot about permissions or change owner.
Besides, if you use connectify, don't need to create ad-hoc hotspot
But, anyway, thnks for this

VavanL said:
of course. I can read English letters
Maybe I forgot about permissions or change owner.
Besides, if you use connectify, don't need to create ad-hoc hotspot
But, anyway, thnks for this
Click to expand...
Click to collapse
Yeah if u use connectify then no need of ad-hoc
n welcome

On te last vanamlite (11.6), the wpa_supplicant that i've copied in /system/bin cause my sgs2's wifi stop working after i've reboot.., it won't start!!
I've already fix the permission of the new wpa_supplicant.
I'f i put back the original in /system/bin and reboot the phone, the wifi start to working again..
May be some kind of incompatibility with vanamlite..??

massimilianonball said:
On te last vanamlite (11.6), the wpa_supplicant that i've copied in /system/bin cause my sgs2's wifi stop working after i've reboot.., it won't start!!
I've already fix the permission of the new wpa_supplicant.
I'f i put back the original in /system/bin and reboot the phone, the wifi start to working again..
May be some kind of incompatibility with vanamlite..??
Click to expand...
Click to collapse
Yeah may be

does above mentioned file works on ics rom on sgs2

sharp87 said:
does above mentioned file works on ics rom on sgs2
Click to expand...
Click to collapse
You may give it a try

Watz da need f wpa_supplicant whn u cn connect directly with connectify???
juss wondering! :silly:

tjkingg said:
Watz da need f wpa_supplicant whn u cn connect directly with connectify???
juss wondering! :silly:
Click to expand...
Click to collapse
But you will not get the internet access ... !!

avilove4u said:
But you will not get the internet access ... !!
Click to expand...
Click to collapse
Well i had tried connectify round a year ago..n it did giv me da internet connection!
---------- Post added at 10:11 AM ---------- Previous post was at 10:06 AM ----------
anywayz m in da wrong forum...thot it was for Fit

tjkingg said:
Well i had tried connectify round a year ago..n it did giv me da internet connection!
---------- Post added at 10:11 AM ---------- Previous post was at 10:06 AM ----------
anywayz m in da wrong forum...thot it was for Fit
Click to expand...
Click to collapse
It works for GFit also
Cheers

avilove4u said:
It works for GFit also
Cheers
Click to expand...
Click to collapse
Indeed it had! n dat too widout da zip

tjkingg said:
Indeed it had! n dat too widout da zip
Click to expand...
Click to collapse
Zip? ?
Real Contributors Dont BeG for Thanks
Cheers

I have do it on my s5570, however, my problem is sometime, when connected adhoc, it sometime long time show "turning on" then show "error" (cant turn on wifi) and i must restart phone!

Come on, with Connectify on Windows 7 you don't need this file....
---------- Post added at 04:16 PM ---------- Previous post was at 04:15 PM ----------
Avilove.Cullen said:
But you will not get the internet access ... !!
Click to expand...
Click to collapse
You get internet access, I used Connectify a lot with my Gio...

xenv1 said:
I have do it on my s5570, however, my problem is sometime, when connected adhoc, it sometime long time show "turning on" then show "error" (cant turn on wifi) and i must restart phone!
Click to expand...
Click to collapse
that's a problem of your rom

bgm92 said:
Come on, with Connectify on Windows 7 you don't need this file....
---------- Post added at 04:16 PM ---------- Previous post was at 04:15 PM ----------
You get internet access, I used Connectify a lot with my Gio...
Click to expand...
Click to collapse
congo .. !!
LOL

Help me install P-Droid?

I hope this is the right place to post this.
When I had my EVO 4g I installed P-Droid, but either I don't remember how I did it, or the method for installing it has changed. So how exactly do I get it installed on my SGS3? I tried using the P-Droid autopatcher on my ROM AOKP JB 10.11.2012b. It said it completed but it never placed the two flashable zips in its directory.
Is this ROM not compatible or am I doing something wrong? I would love to keep P-Droid working again. Would be cool if there was a ROM with it already built into it.

yahar said:
I hope this is the right place to post this.
When I had my EVO 4g I installed P-Droid, but either I don't remember how I did it, or the method for installing it has changed. So how exactly do I get it installed on my SGS3? I tried using the P-Droid autopatcher on my ROM AOKP JB 10.11.2012b. It said it completed but it never placed the two flashable zips in its directory.
Is this ROM not compatible or am I doing something wrong? I would love to keep P-Droid working again. Would be cool if there was a ROM with it already built into it.
Click to expand...
Click to collapse
What is p-droid?
Sent from my SPH-L710...if some one helps you press the thanks button

xtrezpasor said:
What is p-droid?
Sent from my SPH-L710...if some one helps you press the thanks button
Click to expand...
Click to collapse
PDroid allows blocking access for any installed application to the following data separately:
Device ID (IMEI/MEID/ESN)
Subscriber ID (IMSI)
SIM serial (ICCID)
Phone and mailbox number
Incoming call number
Outgoing call number
GPS location
Network location
List of accounts (including your google e-mail address)
Account auth tokens
Contacts
Call logs
Calendar
SMS
MMS
Browser bookmarks and history
System logs
SIM info (operator, country)
Network info (operator, country)
For device ID, phone and mailbox number, SIM serial, subscriber ID and device location it also allows supplying custom or random values.
http://forum.xda-developers.com/showthread.php?t=1357056
I tried reading through it all but I am still confused a bit. I think it can be only used on dedoxed roms (first i've heard of dedoxed). I am unsure if its the rom itself I am supposed to patch or something else. I tried asking elsewhere but got no answer.

yahar said:
PDroid allows blocking access for any installed application to the following data separately:
Device ID (IMEI/MEID/ESN)
Subscriber ID (IMSI)
SIM serial (ICCID)
Phone and mailbox number
Incoming call number
Outgoing call number
GPS location
Network location
List of accounts (including your google e-mail address)
Account auth tokens
Contacts
Call logs
Calendar
SMS
MMS
Browser bookmarks and history
System logs
SIM info (operator, country)
Network info (operator, country)
For device ID, phone and mailbox number, SIM serial, subscriber ID and device location it also allows supplying custom or random values.
http://forum.xda-developers.com/showthread.php?t=1357056
I tried reading through it all but I am still confused a bit. I think it can be only used on dedoxed roms (first i've heard of dedoxed). I am unsure if its the rom itself I am supposed to patch or something else. I tried asking elsewhere but got no answer.
Click to expand...
Click to collapse
So if you just read the first post like i did you would of clearly seen that it only works with gingerbread... No ics version
Sent from my SPH-L710...if some one helps you press the thanks button
---------- Post added at 03:51 AM ---------- Previous post was at 03:49 AM ----------
I will however take a look when i get home from my trip to see if i can figure out how to get it to work
Sent from my SPH-L710...if some one helps you press the thanks button

Here you go PDroid Extension that's the latest information I'm aware..
Best of luck

backup password

wondering if there is a workaround for this,my tablet has given me no issues,up till now...this morning it was asking for a backup password(which i cant remember) i normally use pin or fingerprint for security...any help..kinda vexing

Did you setup a Samsung account? This worked for a coworker with a S5 - fingerprint scanner went wonky and she forgot her backup password as well.
Try doing this:
View attachment 3712498
Source: http://trendblog.net/how-to-bypass-android-phone-lock-screen-pattern-pin-password/

so im not the only one, this happened to me as well, no finger scanning option only backup password (which I cant remember)
what I did is delete 2 files using TWRP file manager under data/system password.key and gesture.key.
reboot your phone and you'll end up with a swipe to unlock
go to settings and change your backup password (will prompt fingerprint) . you may activate your lockscreen with fingerprint again, it may ask you for the backup password but this time, you already know what it is and once you put it in, everythign should be back to normal
let me know if you have question
---------- Post added at 11:44 AM ---------- Previous post was at 11:42 AM ----------
--
additional: the steps above is assuming that you got locked out and cant get past through your lockscreen.

LG G3 WiFi connection "saved", But not connecting.

So here is how it all started. One day i woke up and my phone was continuously restarting and just got stuck on wifi turning on. This is a very common problem and is said to be a hardware issue. A common fix to this, is to open the device and put a couple pieces of paper on the wifi chip to press it against the motherboard. This fixes the problem for most. So this is what i did. But for me, now it identified all the networks in the area but when i connect to a network, it just says "saved"or sometimes "wifi connection failure". The restarting issue is completely gone. I have tried factory reset but no luck. I was unable to find people with similar issue so any help would be highly appreciated!!
I am using android 6.0
previously before adding the papers, the mac address also changed to 02:00:00:00:00:00 but now its back to normal.. but not connecting to wifi.. It just says "connecting" and then "saved".

Please anyone? I am still unable to solve this issue!! ::crying:

BUMP!

Same Issue
Did you find a fix? Im still facing the same issue.

I got the same issue but only with one router. I believe there is something with the router not G3 itself.

alimash2 said:
So here is how it all started. One day i woke up and my phone was continuously restarting and just got stuck on wifi turning on. This is a very common problem and is said to be a hardware issue. A common fix to this, is to open the device and put a couple pieces of paper on the wifi chip to press it against the motherboard. This fixes the problem for most. So this is what i did. But for me, now it identified all the networks in the area but when i connect to a network, it just says "saved"or sometimes "wifi connection failure". The restarting issue is completely gone. I have tried factory reset but no luck. I was unable to find people with similar issue so any help would be highly appreciated!!
I am using android 6.0
previously before adding the papers, the mac address also changed to 02:00:00:00:00:00 but now its back to normal.. but not connecting to wifi.. It just says "connecting" and then "saved".
Click to expand...
Click to collapse
This problem arrises due to installing custom rom and restoring qcn and it could not be solved by restoring back to stock etc.
Simple solution to that problem is
First you need to install any Marshmallow firmware custom rom fulmics etc.
Then go to hidden menu
1- on dial pad : *#546368#*850# (850 is for D850 and write for your model )
2- find and click SCV Menu it should be 3rd one
3-click on CRCWIZARD Test
4-click the tab Auto MID
5- uncheck IMEI in MID settings
6- click generate to generate your new MAC's
7- click MID write
8-Click Refresh to be sure that you changed MAC adress
9-Rebbot phone to take effect!
After reboot you will be able to connect any wifi without having wifi saved problem or connection failure
---------- Post added at 06:39 AM ---------- Previous post was at 06:39 AM ----------
This problem arrises due to installing custom rom and restoring qcn and it could not be solved by restoring back to stock etc.
Simple solution to that problem is
First you need to install any Marshmallow firmware custom rom fulmics etc.
Then go to hidden menu
1- on dial pad : *#546368#*850# (850 is for D850 and write for your model )
2- find and click SCV Menu it should be 3rd one
3-click on CRCWIZARD Test
4-click the tab Auto MID
5- uncheck IMEI in MID settings
6- click generate to generate your new MAC's
7- click MID write
8-Click Refresh to be sure that you changed MAC adress
9-Rebbot phone to take effect!
After reboot you will be able to connect any wifi without having wifi saved problem or connection failure
---------- Post added at 06:40 AM ---------- Previous post was at 06:39 AM ----------
This problem arrises due to installing custom rom and restoring qcn and it could not be solved by restoring back to stock etc.
Simple solution to that problem is
First you need to install any stock Marshmallow or stock base Marshmallow custom rom like fulmics etc.
Then go to hidden menu
1- on dial pad : *#546368#*850# (850 is for D850 and write for your model )
2- find and click SCV Menu it should be 3rd one
3-click on CRCWIZARD Test
4-click the tab Auto MID
5- uncheck IMEI in MID settings
6- click generate to generate your new MAC's
7- click MID write
8-Click Refresh to be sure that you changed MAC adress
9-Rebbot phone to take effect!
After reboot you will be able to connect any wifi without having wifi saved problem or connection failure

[help] can't add registry

Hello all..as i was saying that i can't add registry in my phone using interop tool. I am using interop tool L. i am getting this error
something went worng could not add specific key,no changes to phone registry were made.so i used registry editor but nothing changed there is no new registry created.here are screenshots....thank u

[email protected] said:
Hello all..as i was saying that i can't add registry in my phone using interop tool. I am using interop tool L. i am getting this error
something went worng could not add specific key,no changes to phone registry were made.so i used registry editor but nothing changed there is no new registry created.here are screenshots....thank u
Click to expand...
Click to collapse
I happen to have the same problem lately... If you try to read the key/value, it's gonna return the value/key value but, no registry is created.

xxJMarian said:
I happen to have the same problem lately... If you try to read the key/value, it's gonna return the value/key value but, no registry is created.
Click to expand...
Click to collapse
See if i read the value the operation says read but if i try to add registry it says no specific key added, no change to phone registry were made and i am not understanding why this is happening..

I have had imports fail but the Edit Registry option works. And vice versa. Depends on the device too. On the Nokia models I can edit almost anywhere just by installing and enabling interop unlock. If I use my 950 XL or a 650 which have some added security features it becomes hit or miss. Even if I push the generic ndtk cab to the device. Other times I have to do a hard reset before I can edit the registry where I need. Usually after a recent update or build version release.
EDIT: I just looked at your pics. You are trying to add Sirepuser to the system control key but why are you adding it that way? I am assuming the template is not working? Also why did you need to toggle Restore NDTKsvc? Was editing working before that and then stopped? Lastly which device model are you using Interop Tools on?
I get what you mean. Must be interop tools can add keys/values there using the template but can't read them.

nate0 said:
On the Nokia models I can edit almost anywhere
Click to expand...
Click to collapse
Can you edit or create keys/values inside HKCU? Registry editor shows that you "created" the key/value you want but, once you look at it with the browser, the value or key created is not there...

It seems the key or values under certain areas of the registry are either not supported or not accessible for read from InteropTools.
Edit: If I enable root access after unlocking the boot loader on my 1520 I can see the key values under HKLM\BCD00000001. Must be related to a plolicy interop tools cannot run past, and unlocking the security policies allows it to be unrestricted.

nate0 said:
It seems the key or values under certain areas of the registry are either not supported or not accessible for read from InteropTools.
Edit: If I enable root access after unlocking the boot loader on my 1520 I can see the key values under HKLM\BCD00000001. Must be related to a plolicy interop tools cannot run past, and unlocking the security policies allows it to be unrestricted.
Click to expand...
Click to collapse
Ok agree what you say this means interop tool can't read and write these keys but they are present then why i cant get cmd access.

I have no idea. That's a whole other topic...have you read thoroughly how to do it from the forums? What steps have you done?

nate0 said:
I have no idea. That's a whole other topic...have you read thoroughly how to do it from the forums? What steps have you done?
Click to expand...
Click to collapse
Yes i have read all the steps carefully and do as it says but nothing happened i am getting the same error i thinked there is no key under ssh that's why i am getting this error but after knowing that interop tool can't read these keys i don't know what to do ?. Were you able to get cmd access???

nate0 said:
I have had imports fail but the Edit Registry option works. And vice versa. Depends on the device too. On the Nokia models I can edit almost anywhere just by installing and enabling interop unlock. If I use my 950 XL or a 650 which have some added security features it becomes hit or miss. Even if I push the generic ndtk cab to the device. Other times I have to do a hard reset before I can edit the registry where I need. Usually after a recent update or build version release.
EDIT: I just looked at your pics. You are trying to add Sirepuser to the system control key but why are you adding it that way? I am assuming the template is not working? Also why did you need to toggle Restore NDTKsvc? Was editing working before that and then stopped? Lastly which device model are you using Interop Tools on?
I get what you mean. Must be interop tools can add keys/values there using the template but can't read them.
Click to expand...
Click to collapse
Its was in the tutorial it said on ndtksvc and reboot and i am using Microsoft Lumia 540 os build 10.0.15063.540 interop tool L version 2.0.79

[email protected] said:
Yes i have read all the steps carefully and do as it says but nothing happened i am getting the same error i thinked there is no key under ssh that's why i am getting this error but after knowing that interop tool can't read these keys i don't know what to do . Were you able to get cmd access???
Click to expand...
Click to collapse
Yes, but via ssh. CMD access from the IT app requires elevated privileges and some other tweaks. I can open that part of InteropTools with root enabled without error but was unable to type. You would need to check with gus33000 about that. I just use cmd over ssh for now.
---------- Post added at 03:56 PM ---------- Previous post was at 03:54 PM ----------
[email protected] said:
Its was in the tutorial it said on ndtksvc and reboot and i am using Microsoft Lumia 540 os build 10.0.15063.540 interop tool L version 2.0.79
Click to expand...
Click to collapse
You should only need to toggle the Restore NDTKsvc if you suddenly lose the ability to edit the registry after successfully getting access the first time. I have had this happen after an update or if system settings updated...

The registry browser has limited access to the registry, it can't enumerate every key, but that totally doesn't mean they aren't here, that's why you have a registry editor section in the page to actually add values where you can't see anything, in your screenshots you wrote fine to those values, so it worked.

gus33000 said:
The registry browser has limited access to the registry, it can't enumerate every key, but that totally doesn't mean they aren't here, that's why you have a registry editor section in the page to actually add values where you can't see anything, in your screenshots you wrote fine to those values, so it worked.
Click to expand...
Click to collapse
Then why i can't get cmd access i have tried everything....every step as it was in interop tool but nothing happened. I tried to connect to ssh server via ssh client on windows store but i can't get success. I just want to know where i am missing..

[email protected] said:
Then why i can't get cmd access i have tried everything....every step as it was in interop tool but nothing happened. I tried to connect to ssh server via ssh client on windows store but i can't get success. I just want to know where i am missing..
Click to expand...
Click to collapse
Did you set a custom password in interop tools and did you get cmd.exe and cmd.exe.mui via ssh on the device?
You also can't use a client on the device itself.

gus33000 said:
Did you set a custom password in interop tools and did you get cmd.exe and cmd.exe.mui via ssh on the device?
You also can't use a client on the device itself.
Click to expand...
Click to collapse
Yes i set custom password but didn't get cmd access via ssh

nate0 said:
Yes, but via ssh. CMD access from the IT app requires elevated privileges and some other tweaks. I can open that part of InteropTools with root enabled without error but was unable to type. You would need to check with gus33000 about that. I just use cmd over ssh for now.
---------- Post added at 03:56 PM ---------- Previous post was at 03:54 PM ----------
You should only need to toggle the Restore NDTKsvc if you suddenly lose the ability to edit the registry after successfully getting access the first time. I have had this happen after an update or if system settings updated...
Click to expand...
Click to collapse
Okk can you help to get cmd access via ssh please

nate0 said:
Yes, but via ssh. CMD access from the IT app requires elevated privileges and some other tweaks. I can open that part of InteropTools with root enabled without error but was unable to type. You would need to check with gus33000 about that. I just use cmd over ssh for now.
---------- Post added at 03:56 PM ---------- Previous post was at 03:54 PM ----------
You should only need to toggle the Restore NDTKsvc if you suddenly lose the ability to edit the registry after successfully getting access the first time. I have had this happen after an update or if system settings updated...
Click to expand...
Click to collapse
Okk can you help to get cmd access via ssh please

got success
finally got success access cmd via ssh.thanks everyone for helping me..so the conclusion i got:-
first some keys are protected so can't be access by interop tool but can be edit by registry editor.
Second you have to set custom password through ssh account manager but i don't know why system console in interop tool is not working but you can access cmd via ssh if you have done all the steps correctly and i finally i know where i was missing all the time it was not registry as i was thinking it is not present the thing i was missing was i tried to connect to ssh client on my device it didn'tworked but when i tried to connect to cmd with another device via ssh it worked and all credit goes to @gus33000 and @nate0 who helped me...Thank you:good: