Develop Bugs

[XAP] HTC Test Tool

maybe a solution for usb storage error,zune sync problem error .
http://forum.xda-developers.com/showthread.php?t=1212915
use at your own risk. this apps can brick your device.
attached zip contain:
HTC BATTERY TOOL.xap
RegisterEdit.xap
USBModeSwitch.xap
DebugFlagEdit.xap
HTCGPSTool.xap
StressTool.xap
StorageFullTool.xap (REMOVED DO NOT USE IT)
GCFSettings.xap
To use this apps 1st install the attached certificate.
(like for chevron.cer by sending a mail to your device)
then deploy xap.
tested on HTC Trophy
DO NOT USE StorageFullTool.xap FULL TEST!!
AN USER REPORT 0Mo STORAGE AFTER USED IT AND NO SOLUTION FOR NOW
use at your own risk. I take no
responsibility for any conflict, fault, or damage caused by
this tools.
DO NOT ASK ME FOR THE FILES
SEARCH IN THE THREAD.
use at your own risk. I take no
responsibility for any conflict, fault, or damage caused by
this tools.

lemme test

any chance of the youtube app?

digger1985 said:
any chance of the youtube app?
Click to expand...
Click to collapse
you can check this thread http://forum.xda-developers.com/showthread.php?t=894502
or maybe, you want to look here webcache[dot]googleusercontent.com/search?q=cache:http://thounsell.co.uk/2010/12/chevronwp7-now-without-the-sideload-limit/

DO NOT USE StorageFullTool.xap FULL TEST an USER REPORT 0Mo STORAGE AFTER USED IT AND NO SOLUTION FOR NOW
IF SOMEONE AS A SOLUTION WITHOUT OPENING THE DEVICE THAT CAN BE NICE.

DO NOT USE StorageFullTool.xap FULL TEST an USER REPORT 0Mo STORAGE AFTER USED IT AND NO SOLUTION FOR NOW
Click to expand...
Click to collapse
Before I had read it, my finger was too quick. "0" Storage
Now it has happened and hope someone has found a way to solve the problem.
Proposals will be gratefully received.
I think it is better to remove the tool. ;-| (Thanks xbaxmod for remove.)
Thanks a lot for help.

remplace the Storage.
To you have the StorageFullTool.xap application?

Unable to switch back to zune mode
xboxmod said:
Hi
i have successfully patch Xap from Htc Mozart Test Rom
to deploy it on our HTC unlocked device.
You can download HTC hub unlocked here an old version just for test on other device.
attached zip contain:
HTC BATTERY TOOL.xap
RegisterEdit.xap
USBModeSwitch.xap
DebugFlagEdit.xap
HTCGPSTool.xap
StressTool.xap
StorageFullTool.xap (user report no storage detected after start test take care)
GCFSettings.xap
To use this apps 1st install the attached certificate.
(like for chevron.cer by sending a mail to your device)
then deploy xap.
tested on HTC Trophy
DO NOT USE StorageFullTool.xap FULL TEST AN USER REPORT 0Mo STORAGE AFTER USED IT AND NO SOLUTION FOR NOW
IF SOMEONE AS A SOLUTION TO FORMAT STORAGE WITHOUT OPENING THE DEVICE THAT CAN BE NICE
use at your own risk. I take no
responsibility for any conflict, fault, or damage caused by
this tools.
Thread related to this:
[APP] XAP_Dll_Signer 0.1 (unlock All Xap)
[XAP] Samsung Omnia 7 apps for HTC
HTC HUB Custom Theme
Click to expand...
Click to collapse
Hi there, thanks for this greate tools. I've try some. unfortunately for USBModeSwitch.xap, once installed then please never try to switch to DIAG mode. this will caused you cant sync your device (in my case HTC HD7) with zune. then when device restarted, system popup, the application has been REVOKE my microsoft, please uninstall (with only OK button). Bamm... then I only have choice to click ok button. After that the application has been uninstall. Followed by other apps that has install using application deployment.
So my problem now is, i cant turn my device back to ZUNE mode. demmm~ is that really the apps has been revoke by Microsoft? demm again... all apss install with apps dep. gone.

pth6 said:
remplace the Storage.
Click to expand...
Click to collapse
This I have done it twice, each time the same result: "0 " storage.
Have almost no memory cards. ;-/
pth6 said:
To you have the StorageFullTool.xap application?
Click to expand...
Click to collapse
Not longer on my phone, on my PC yes.
Its also a problem, without storage, you cant make a Mail-Account on the phone for the Unlocking and install the .cert*. :-(
Other solutions or help please?

Ddriver said:
This I have done it twice, each time the same result: "0 " storage.
Have almost no memory cards. ;-/
Not longer on my phone, on my PC yes.
Its also a problem, without storage, you cant make a Mail-Account on the phone for the Unlocking and install the .cert*. :-(
Click to expand...
Click to collapse
I know I have the same problem. I dont have tested replace the memory by a new on. => SAV

AzmanIshak said:
Hi there, thanks for this greate tools. I've try some. unfortunately for USBModeSwitch.xap, once installed then please never try to switch to DIAG mode. this will caused you cant sync your device (in my case HTC HD7) with zune. then when device restarted, system popup, the application has been REVOKE my microsoft, please uninstall (with only OK button). Bamm... then I only have choice to click ok button. After that the application has been uninstall. Followed by other apps that has install using application deployment.
So my problem now is, i cant turn my device back to ZUNE mode. demmm~ is that really the apps has been revoke by Microsoft? demm again... all apss install with apps dep. gone.
Click to expand...
Click to collapse
I've got the same problem, not even a hard reset switches it back to zune mode, i'll prob have to take my Mozart back to the shop wish I had read this earlier...

feygor said:
I've got the same problem, not even a hard reset switches it back to zune mode, i'll prob have to take my Mozart back to the shop wish I had read this earlier...
Click to expand...
Click to collapse
try to unlock and relock with chevronwp7 again install USBModeSwitch.xap and swish to zune

feygor said:
I've got the same problem, not even a hard reset switches it back to zune mode, i'll prob have to take my Mozart back to the shop wish I had read this earlier...
Click to expand...
Click to collapse
flash a new rom

So, we should not use ANY of the tools? Which xap is safe to run at the moment?

Can anyone upload the StorageFullTool.xap? I would like to take a closer look at how it works.
Thank you

martani said:
Can anyone upload the StorageFullTool.xap? I would like to take a closer look at how it works.
Thank you
Click to expand...
Click to collapse
Attached file:

martani said:
I would like to take a closer look at how it works.
Click to expand...
Click to collapse
Thank you for your interest to help.
It looks as if this tool by software locks the storage card.
In the bootloader mode is selected 16GB like the size from the storagecard.

I don't have an HTC device (I have the Samsung Omnia 7), and I want to understand what happens after you use the StorageFullTool.xap
From the source code, it calls driver2.myIOCTL_SetStorageFullStatus(false, ref uRetStatus); then driver2.myIOCTL_ClearStorage(ref uRetStatus); to clear the storage it seems.
The same source code has a function called Thread_EnableFullTest which calls simply driver2.myIOCTL_SetStorageFullStatus(true, ref uRetStatus);
and driver2.myIOCTL_ClearStorage(ref uRetStatus);
The question now is, can you use your device at all? if yes can you install apps on it?

martani said:
I don't have an HTC device (I have the Samsung Omnia 7), and I want to understand what happens after you use the StorageFullTool.xap
From the source code, it calls driver2.myIOCTL_SetStorageFullStatus(false, ref uRetStatus); then driver2.myIOCTL_ClearStorage(ref uRetStatus); to clear the storage it seems.
The same source code has a function called Thread_EnableFullTest which calls simply driver2.myIOCTL_SetStorageFullStatus(true, ref uRetStatus);
and driver2.myIOCTL_ClearStorage(ref uRetStatus);
The question now is, can you use your device at all? if yes can you install apps on it?
Click to expand...
Click to collapse
Currently, there is this:
- No storage because the operating system needs everything.
- 13.03 MB Storage total.
- No Windows Live Mail account or POP mail possible, as no storage.
- No, nothing possible to install or using. :-(
Connect with Zune is possible, only without else to sync.
Hope this help you.

xboxmod said:
Attached file:
Click to expand...
Click to collapse
did you got the regedit xap working ?
(I cant read anything )

[Guide]Unlocking Android Protection Code Without Reset Or Root

THIS METHOD WILL NOT WORK IN NEWER VERSIONS OF ANDROID
Click to expand...
Click to collapse
1.Please note that by using this method you can unlock phone without losing any data.
2.This must not be used for any illegal purpose.
3.I do not hold any responsibility of any phones bricked using this method(though it is tested)
.
.
Requirements
Links
1.Download Android Multi Tools- Click Here
2.Universal Adb Drivers - Click Here
Click to expand...
Click to collapse
.
.
Now lets begin
1.First unpack the tool.
2.Then install the adb driver.
3.Turn on your phone and connect it to pc via data cable.
4.Now press 1 to check if your device is connected properly.
5.Now if you have pin,password or face-lock please press 2.
6.If you have pattern lock then press 3.
7.Device will reboot and it will be unlocked.
8.If it still shows pattern,pin or password enter window simply simply give any to unlock.
Click to expand...
Click to collapse
.
.
Other action that can be done by this program are below
.
Choice detail
1.check device for check connection of device to pc.
4.reset gmail for reset gmail login after try many time wrong unlock
5.wipe data for reset all data to factory setting.
6.reboot for reboot device to normal mode or exit from adb shell.
7.check device on fastboot mode for check connection of device to on fastboot mode.
8.wipe data / cache on fastboot mode for erase user datat and cache on fastboot mode to resolve freeze,stuk on boot logo or slow down device. That is often found in the cpu spreadtrum sc6280/sc8810.
9.exit fastboot mode for reboot your pc or exit fastboot.
0.go to command promt for entering dos promt.you can use command in this soft folder and can return to the main program by type exit
s.software info for info cpu inside,firmware version and etc.
H.hardware info for determine the ic number of gsensor,touch screen,camera,wifi and more
Click to expand...
Click to collapse
.
.
.
thanks for reading this post
Written By
Pranto Roy
XDA
Click to expand...
Click to collapse

Links
1.download android multi tools- http://d-h.st/rCh
2. universal adb drivers - http://adbdriver.com/upload/AdbDriverInstaller.exe

prantoroy said:
Links
1.download android multi tools-
2. universal adb drivers -
Click to expand...
Click to collapse
thanks
my younger bro face this problem yesterday and today i got ans
will try and update

Jpjayesh said:
thanks
my younger bro face this problem yesterday and today i got ans
will try and update
Click to expand...
Click to collapse
Sure Please Update

Thnks
Sent from my HTC One X using xda app-developers app

chrisb906 said:
Thnks
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
hmm. . . gud
share it!!

Unfortunately, I was not at my work machine.
Pranto Roy said:
1.Please note that by using this method you can unlock phone without losing any data.
2.This must not be used for any illegal purpose.
3.I do not hold any responsibility of any phones bricked using this method(though it is tested)
.
.
.
.
.
.
.
.
.
Click to expand...
Click to collapse
Hello to everyone!
This description is very good, but unfortunately I can not help of mind. The Freetab 2099 tablet is set, the OSD, I forgot, offered through the recovery gmail account, but the machine is not connected to the Internet, and it can not be solved. The Windows XP felimeri the machine, but only shows an empty folder adb driver installation, and Total Commander, however does not see downloaded from the manufacturer's website drivers installed, but not working this solution, a multitool can not find device. Maybe a factory reset would solve the matter but has not yet been described find or install a new rom that is. Img extension of the manufacturer's side, but I do not know bekepcsolni debug mode on the machine, it does not allow the zárképrnyőről to move on.
If anyone knows a solution to my problem, thanks in advance.
Hello, Valer

Tiszaba said:
Hello to everyone!
This description is very good, but unfortunately I can not help of mind. The Freetab 2099 tablet is set, the OSD, I forgot, offered through the recovery gmail account, but the machine is not connected to the Internet, and it can not be solved. The Windows XP felimeri the machine, but only shows an empty folder adb driver installation, and Total Commander, however does not see downloaded from the manufacturer's website drivers installed, but not working this solution, a multitool can not find device. Maybe a factory reset would solve the matter but has not yet been described find or install a new rom that is. Img extension of the manufacturer's side, but I do not know bekepcsolni debug mode on the machine, it does not allow the zárképrnyőről to move on.
If anyone knows a solution to my problem, thanks in advance.
Hello, Valer
Click to expand...
Click to collapse
Seriously Man.
Didn't Understood A Word.
Give Details and Only Ask The Main Question

Pranto Roy said:
Seriously Man.
Didn't Understood A Word.
Give Details and Only Ask The Main Question
Click to expand...
Click to collapse
The "Freetab 2099" table host forgot the password and can not login. The Android Multi Tools does not recognize your computer, Windows can only see empty folders. How to factory reset the computer to do?

Tiszaba said:
The "Freetab 2099" table host forgot the password and can not login. The Android Multi Tools does not recognize your computer, Windows can only see empty folders. How to factory reset the computer to do?
Click to expand...
Click to collapse
If The Computer Doesn't Recognize It Install Drivers.
Without Identifying Its Not Possible.

Pranto Roy said:
If The Computer Doesn't Recognize It Install Drivers.
Without Identifying Its Not Possible.
Click to expand...
Click to collapse
Hello!
The Adb Driver Installer does not recognize the machine, so I installed the manufacturer's website for official drivers. Only one folder is empty, or whatever it may be copied, "The device is not responding or is not connected."

Tiszaba said:
Hello!
The Adb Driver Installer does not recognize the machine, so I installed the manufacturer's website for official drivers. Only one folder is empty, or whatever it may be copied, "The device is not responding or is not connected."
Click to expand...
Click to collapse
I'll Get The Drivers

ts, i tried to used the tool the the .exe recognize my device it shows the serial number but when i tried to unlock using otion 2 or 3 it doesn't work i got skk mobile a1 device it has somewhat like ios GUI

ghepier said:
ts, i tried to used the tool the the .exe recognize my device it shows the serial number but when i tried to unlock using otion 2 or 3 it doesn't work i got skk mobile a1 device it has somewhat like ios GUI
Click to expand...
Click to collapse
If It Recognized Ur Device It Will Work
And Please Add Details
Eg. What Error Message etc.

Hi there, i have tried to use the following software but it doesnt work
so basically I have a samsung G3 i9300T and I know the pattern code but i still want to try out.
firstly when i ran the Multi-tool, it doesn't recongized my phone. So i realized i have to turn on USB debugging in order to let the software to detect my phone.
So i have turned the usb debug mode on and it finally picks up my phone.
Press 1 and it has my serial number, good, good. Then I go to option 3 as you mentioned in order to unlock pattern lock.
It reboots, and the pattern lock is still sitting on screen. So i tried to swipe anywhere on the pattern lock but it doesnt allow me to go further unless i input the right code.
Now i am wondering what could went wrong?

Fossil_Sioux said:
Hi there, i have tried to use the following software but it doesnt work
so basically I have a samsung G3 i9300T and I know the pattern code but i still want to try out.
firstly when i ran the Multi-tool, it doesn't recongized my phone. So i realized i have to turn on USB debugging in order to let the software to detect my phone.
So i have turned the usb debug mode on and it finally picks up my phone.
Press 1 and it has my serial number, good, good. Then I go to option 3 as you mentioned in order to unlock pattern lock.
It reboots, and the pattern lock is still sitting on screen. So i tried to swipe anywhere on the pattern lock but it doesnt allow me to go further unless i input the right code.
Now i am wondering what could went wrong?
Click to expand...
Click to collapse
That Is The Exact Process
I'll test it On S3

Didn't work on Motorola XT901
Thanks for supplying such a tool, unfortunately I tried it and had the same result has Fossil_Sioux on a Motorola XT901. Phone is recognized and when I select option 2 it reboots, but the lock screen is still displayed. I enter in any random pin and it just prompts me to try again. Any suggestions?

thanks
thanks for your time in posting this information because i find it very helpful

Nice
Nice thread...thnx man.

Devill007 said:
Nice thread...thnx man.
Click to expand...
Click to collapse
Thanks

Unlocked Nokia, No access via USB on the PC ?

Hey all,
I just used root tool yesterday (http://forum.xda-developers.com/win.../jailbreak-interop-unlock-windows-10-t3178140 )and I loss access on my PC.
This is a Nokia 929 (Verizon ICON) with build 10512 on it.
When I connect to a PC, I get the noise on my phone (and slow charging message) but, the PC does nothing, does not see a connection. Tried 3 different PCs and rebooted my phone in between. I need to transfer files on and off the phone.
Any idea on how to fix this WITHOUT hard resetting ?

DavidinCT said:
Hey all,
I just used root tool yesterday (http://forum.xda-developers.com/win.../jailbreak-interop-unlock-windows-10-t3178140 )and I loss access on my PC.
This is a Nokia 929 (Verizon ICON) with build 10512 on it.
When I connect to a PC, I get the noise on my phone (and slow charging message) but, the PC does nothing, does not see a connection. Tried 3 different PCs and rebooted my phone in between. I need to transfer files on and off the phone.
Any idea on how to fix this WITHOUT hard resetting ?
Click to expand...
Click to collapse
Keep it connected for 10 minutes on the pc. If it doesn't show, unplug and plug it again.
You "lose" access to your phone from the pc because you enabled Full MTP. Enabling Full MTP your phone need to list ALL files and folder and not only your common folder like Documents and so on but also system files from the root of the phone (C:\).
You don't need of that. Deploy CustomPFD, open it, go to tweaks page > General tweaks, Utilities (page), on full fs access, enable it and then disable it.
Unplug and replug it and you have done.

This seems to be an issue with the MTP protocol being unable to handle the sheer amount of files and causing the driver to crash sometimes.
Currently, I have the HKLM\Software\Microsoft\MTP\DataStore key set to C:\Data\Users and it works fine that way. I modify this path according to what I want to access, instead of having it set to the root of C:\.

ADeltaX said:
Keep it connected for 10 minutes on the pc. If it doesn't show, unplug and plug it again.
You "lose" access to your phone from the pc because you enabled Full MTP. Enabling Full MTP your phone need to list ALL files and folder and not only your common folder like Documents and so on but also system files from the root of the phone (C:\).
You don't need of that. Deploy CustomPFD, open it, go to tweaks page > General tweaks, Utilities (page), on full fs access, enable it and then disable it.
Unplug and replug it and you have done.
Click to expand...
Click to collapse
Thanks ! Tried that, it didn't work
acewing905 said:
This seems to be an issue with the MTP protocol being unable to handle the sheer amount of files and causing the driver to crash sometimes.
Currently, I have the HKLM\Software\Microsoft\MTP\DataStore key set to C:\Data\Users and it works fine that way. I modify this path according to what I want to access, instead of having it set to the root of C:\.
Click to expand...
Click to collapse
Tried that it worked, maybe a combo of both did it... Thanks to both of you !
What folder on the C: drive is where the apps are stored, wanted to check a setting for a game....?

DavidinCT said:
Thanks ! Tried that, it didn't work
Tried that it worked, maybe a combo of both did it... Thanks to both of you !
What folder on the C: drive is where the apps are stored, wanted to check a setting for a game....?
Click to expand...
Click to collapse
Android stored apps or WP stored apps?

ADeltaX said:
Android stored apps or WP stored apps?
Click to expand...
Click to collapse
WP apps...

Mine had some weird issue that USB wasn't even recognized when Windows 10 was booted, but while booting it's still recognized... Thou, I already fixed it with a factory reset....
Sent from Ponyville

DavidinCT said:
WP apps...
Click to expand...
Click to collapse
U:\PROGRAMS or C:\Data\PROGRAMS

[HELP] Cannot connect to PC using usb cable.

Hello,
I have Lumia 930 with W10M ....yesterday,i deployed "root app" and "CustomPFD" .xaps to my device...to get Interop Unlock and Full FS Access,but i think i do something what i shouldnt do...
My probles is: when i connect my device to PC using same USB cable as yesterday an any other day....it just pop up messenge about slow charger,normalny its pop up if i wanna use cable to move items and stuff from/to my device...but now i just cannot connect my L930 to PC....it just charges my phone...can u guys please tell me how to solve this problem??

It happened to me yesterday. The issue is activating full MTP access. It doesen't work properly. It has a slim chance for your pc to detect the system files. I recommend you use customPDF registry editor to revert the changes (search this forum). Or factory reset will do, but it will be a hassle setting up your phone all over again.

soad26 said:
It happened to me yesterday. The issue is activating full MTP access. It doesen't work properly. It has a slim chance for your pc to detect the system files. I recommend you use customPDF registry editor to revert the changes (search this forum). Or factory reset will do, but it will be a hassle setting up your phone all over again.
Click to expand...
Click to collapse
I searched....and tryed that "enable and disable" method in CustomPFD...i seriously dont wanna factory reset my phone...ohhh....that so bad
EDIT: Oh.nothing works....i think i need to do factory reset...when its done ill post next EDIT if it works

You have to do it manually. I found this. This is the exact process i did with cPDF.
navigate this path :
HKLM\Software\Microsoft\MTP
edit Data Store value to c:\Data\Users\Public and hit Write button .
that's it
Unplug/replug your phon until the system detects it.

soad26 said:
You have to do it manually. I found this. This is the exact process i did with cPDF.
navigate this path :
HKLM\Software\Microsoft\MTP
edit Data Store value to c:\Data\Users\Public and hit Write button .
that's it
Unplug/replug your phon until the system detects it.
Click to expand...
Click to collapse
A did this already but it didnt worked...is already has "c:\Data\Users\Public " value....

Sharp852 said:
A did this already but it didnt worked...is already has "c:\Data\Users\Public " value....
Click to expand...
Click to collapse
Did you restart? And press write like 10x. Unplug your phone, wait. If it did not work, just unplug/replug until your pc detects it.

soad26 said:
Did you restart? And press write like 10x. Unplug your phone, wait. If it did not work, just unplug/replug until your pc detects it.
Click to expand...
Click to collapse
I did factory reset...now it works like a charm...but while formatting,i rimebered that i forgot to backup my photos.... ...so i dont have my photos now....

Ouch... I feel you brother. Just do interop unlock, i dont find full mtp access that really useful.

soad26 said:
Ouch... I feel you brother. Just do interop unlock, i dont find full mtp access that really useful.[/QUOTE
Okay,at least i have some of photos on Onedrive form WP8 .....at least something....okay...so i dont need Full MTP access really.....so just interop unlock from "root tool"...and what to choose? just Interop,Interop+Capability or Win10 Capabilities? and...ive seen on 1 threat what there is option to bring on 5 Quick Access tiles...how to do that??
Click to expand...
Click to collapse

same on Lumia 535
Sharp852 said:
Hello,
I have Lumia 930 with W10M ....yesterday,i deployed "root app" and "CustomPFD" .xaps to my device...to get Interop Unlock and Full FS Access,but i think i do something what i shouldnt do...
My probles is: when i connect my device to PC using same USB cable as yesterday an any other day....it just pop up messenge about slow charger,normalny its pop up if i wanna use cable to move items and stuff from/to my device...but now i just cannot connect my L930 to PC....it just charges my phone...can u guys please tell me how to solve this problem??
Click to expand...
Click to collapse
same problem

Having this issue on my Lumia 830. I did the registry changes (tried combo of upper/lowercase for the registry key) and nothing worked.
Eventually, after trying boot mode (the ! window) I am locked out of all my jailbreak apps. I suspect the boot loader (holding the volume key down until the ! screen loads) locked my capabilities.
Oh well. Windows Recovery Tool says there's new Firmware for the 830 (much newer than what's on my phone). Yet another full restore is in the works for me. Hope anyone reading this doesn't make the same mistake I did!

AFTV2: USB Not Working After Rooting

USB Not working since rooted AFTV2
Hi, Since rooting my AFTV2 , i an unable to use wired mouse on USB. Therefor unable to use Show box or Popcorn.
Is there a solution ?

http://forum.xda-developers.com/fire-tv/themes-apps/useful-app-to-ftv-stick-remote-mouse-t3185049

USB not working after rooting AFVT2
roligov said:
http://forum.xda-developers.com/fire-tv/themes-apps/useful-app-to-ftv-stick-remote-mouse-t3185049
Click to expand...
Click to collapse
Thanks for the link just what i want it looks good , as i don't have an google play account i will have to contact the developer.

If you look at the first post in that thread there are APK attachments of the app.

see if you have usb debugging enabled and disable it. (the choice below enable adb)