Anybody here know how to turn on diag mode on robin?
on other AOSP based ROM, doing setprop sys.usb.config diag,adb from cmd or terminal would do the trick, however it doesnt work on robin,
am trying to connect this phone to qxdm for ims (VoLTE) configuration...
setprop sys.usb.config mtp,mass_storage,diag,serial_smd,adb
Trimzulu said:
setprop sys.usb.config mtp,mass_storage,diag,serial_smd,adb
Click to expand...
Click to collapse
Yes thank you, already found that. And actually already post it in nextbit razer forum. Am the same guy who wrote there, LoL
I noticed it there. I just figured for historical purposes it would be nice to post it here as well.
otonieru said:
am trying to connect this phone to qxdm for ims (VoLTE) configuration...
Click to expand...
Click to collapse
Any success? am trying to enable VoLTE for a carrier in India (Jio), no success yet.
nimms said:
Any success? am trying to enable VoLTE for a carrier in India (Jio), no success yet.
Click to expand...
Click to collapse
Nah,
No luck yet,
Even when all parameter is set. The phone still wont connect to IMS
Related
How can i enable diagnostic mode on T-mobile Htc M8?
3424 doesn't work
jkjambo said:
How can i enable diagnostic mode on T-mobile Htc M8?
3424 doesn't work
Click to expand...
Click to collapse
if your in sense why not just use the phone diagnostics from sense? its *#*#4636#*#*
syaoran68 said:
if your in sense why not just use the phone diagnostics from sense? its *#*#4636#*#*
Click to expand...
Click to collapse
that's completely different thing
i need diag mode and that's only test mode
what are you trying to diagnose?
syaoran68 said:
what are you trying to diagnose?
Click to expand...
Click to collapse
why are you interested in this?
i need it for few reasons , like trying to unlock lte bands , to make a back up of qcn , ect...
so is there diag mode for t-mob m8 or not? or do i need some kernel with it?
jkjambo said:
why are you interested in this?
Click to expand...
Click to collapse
Because if we know what you're trying to do we can give better advice.
Unless what you're trying to do is technically against forum rules, of course
jkjambo said:
why are you interested in this?
i need it for few reasons , like trying to unlock lte bands , to make a back up of qcn , ect...
so is there diag mode for t-mob m8 or not? or do i need some kernel with it?
Click to expand...
Click to collapse
what was said above ^
but back to your question. Yes there is a diag mode available, but you need a bypass card in order to access it. this diag mode is normally meant for diagnosing faulty mainboards, and the such.
so basically yes there is a mode, but no your not going to be able to get access to it. cause the card itself is a unicorn, and there have been some home made cards but realistically if your trying to download / change the bands its nearly impossible. since the firmware's are so locked down.
EddyOS said:
Because if we know what you're trying to do we can give better advice.
Unless what you're trying to do is technically against forum rules, of course
Click to expand...
Click to collapse
what can you do with diag mode which is against rules? i'm not trying to change imei or something like that
syaoran68 said:
what was said above ^
but back to your question. Yes there is a diag mode available, but you need a bypass card in order to access it. this diag mode is normally meant for diagnosing faulty mainboards, and the such.
so basically yes there is a mode, but no your not going to be able to get access to it. cause the card itself is a unicorn, and there have been some home made cards but realistically if your trying to download / change the bands its nearly impossible. since the firmware's are so locked down.
Click to expand...
Click to collapse
it's avaliable on sprint m8 with this code ##3424# , so what's problem with t-mob m8?
i think there should be some adb commands at least, but i'm asking if there is some code for it , like it's on sprint version
It should be the same code for all devices, unless the carrier has disabled it
EddyOS said:
It should be the same code for all devices, unless the carrier has disabled it
Click to expand...
Click to collapse
not working on t-mobile m8 . as i know *#*#3424#*#* works on gsm m8 (international version) , but it doesn't work on t-mobile . i'm now on lollipop , but it wasn't working on kitkat too
here is answer . Thanks to marhinal88
On:
su
echo 1 > /sys/devices/virtual/android_usb/android0/f_diag/on
Off:
su
echo 0 > /sys/devices/virtual/android_usb/android0/f_diag/on
How can I access Engineer/Service mode on my OP3? I would like to view LTE information and select a specific band. It was really easy on my old Samsung. I have tried *#*#83781#*#* and *#*#2637643#*#* -When I type these codes, it diminishes itself and nothing happens. Then I tried the old *#*#4636#*#* but it didn't had that setting to select LTE band. I also tried *#36446337# and *#808# and these also don't have that setting.
Thanks
I join the request
*#801# engineer mode
you can try replacing the x with 1-9 *#80x#
At the moment you can't unlock new lte bands, we need a specific patch for op3 (64bit patch) because NVRAM values will reset after reboot the phone.
I've already tried but my pc don't recognizes op3, so good luck, maybe with a custom kernel will work?
For more information on unlocking bands, join the thread http://forum.xda-developers.com/oneplus-3/help/unlocking-lte-bands-t3425871
NotAxel said:
*#801# engineer mode
you can try replacing the x with 1-9 *#80x#
At the moment you can't unlock new lte bands, we need a specific patch for op3 (64bit patch) because NVRAM values will reset after reboot the phone.
I've already tried but my pc don't recognizes op3, so good luck, maybe with a custom kernel will work?
Click to expand...
Click to collapse
I've tried with all the sequences from 1 to 9 without success. BTW, I read somewhere the Engineer/Service Mode has a setting in the A3000 to switch from Asian configuration to USA configuration. Is it true?. That will fix my LTE issues.
nebtrx said:
BTW, I read somewhere the Engineer/Service Mode has a setting in the A3000 to switch from Asian configuration to USA configuration. Is it true?. That will fix my LTE issues.
Click to expand...
Click to collapse
nope already tried, nothing changes
NotAxel said:
nope already tried, nothing changes
Click to expand...
Click to collapse
Thx!
*#*#4636#*#*
how to enable engineering mode? I tried *#*#4636#*#* but nothing happened!
any solution?
Ps. I'm non-root
For me it's working so I guess you have a carrier version that maybe have this option not available. I have the Google version.
you can always borrow someones sprint sim fir a bit then ull have access to a lot of commands.. i was able to get data programming, debug menu, the 4636 etc etc on a vzw variant just by utting in a dif sim
hostmark said:
how to enable engineering mode? I tried *#*#4636#*#* but nothing happened!
any solution?
Ps. I'm non-root
Click to expand...
Click to collapse
Worked here Verizon pixel 3 xl
Hi,
I cannot access to service mode menu *#2263# , blank screen, I have exynos versio of note 10.
Any idea?
Works fine on my US SD model.
My unlocked 10+ flashed with t-mobile firmware works for that service mode.
BTW did you try other codes like *#0*#, to see if they work? I also remember something about Exynos having different sequence for some codes than SD in the past, but I don't remember details. I think there are some apps that can list all the codes available for your phone, so that would be my next step.
pete4k said:
BTW did you try other codes like *#0*#, to see if they work? I also remember something about Exynos having different sequence for some codes than SD in the past, but I don't remember details. I think there are some apps that can list all the codes available for your phone, so that would be my next step.
Click to expand...
Click to collapse
Hi, *#0*# work for me but service mode *#2263# no.
I don't know what's the code for N970F model
both codes posted above my post works on my unlocked 512gb 10+.
marctronixx said:
both codes posted above my post works on my unlocked 512gb 10+.
Click to expand...
Click to collapse
Hi,rooted?
trignogd said:
Hi, *#0*# work for me but service mode *#2263# no.
I don't know what's the code for N970F model
Click to expand...
Click to collapse
dl phoneinfo.apk or similar that lists all the dialer codes for u to try..
if none work then its possible ur carrier disabled them.. if u have root u can enable them.. on sd devices you would enable in the file /efs/FactoryApp/keystr and /efs/carrier/HiddenMenu..
i have vzw who blocks dialer codes so i always have to enable them manually..
trignogd said:
Hi,rooted?
Click to expand...
Click to collapse
No, stock out of the box no root.
elliwigy said:
dl phoneinfo.apk or similar that lists all the dialer codes for u to try..
if none work then its possible ur carrier disabled them.. if u have root u can enable them.. on sd devices you would enable in the file /efs/FactoryApp/keystr and /efs/carrier/HiddenMenu..
i have vzw who blocks dialer codes so i always have to enable them manually..
Click to expand...
Click to collapse
But we can't enable on vzw on note 10 cause no root correct or did I misinterpret?
Just a real quick question before i return the phone tomorrow.
On the g981u1 (purchased from google through Fi), same as everywhere else, has the sim manager disabled, bootloader not unlockable.
From all the searching i did today, which was horrible, i just wanted to verify in a last ditch effort before sending it back.
The only way i found to enable esim is to modify the features.xml (from sounds of it). However to do so you need root, and of course it appears root requires unlocked bootloader(unless i missed something somewhere)
I have been unable to find a way to unlock bootloader(am i wrong?)
I havent found root (without unlocked bootloader)
Edit- nvm i found what i was looking for
skullzaflare said:
Just a real quick question before i return the phone tomorrow.
On the g981u1 (purchased from google through Fi), same as everywhere else, has the sim manager disabled, bootloader not unlockable.
From all the searching i did today, which was horrible, i just wanted to verify in a last ditch effort before sending it back.
The only way i found to enable esim is to modify the features.xml (from sounds of it). However to do so you need root, and of course it appears root requires unlocked bootloader(unless i missed something somewhere)
I have been unable to find a way to unlock bootloader(am i wrong?)
I havent found root (without unlocked bootloader)
Edit- nvm i found what i was looking for
Click to expand...
Click to collapse
So what is your solution?
Sent from my SM-G985F using Tapatalk
skullzaflare said:
Just a real quick question before i return the phone tomorrow.
On the g981u1 (purchased from google through Fi), same as everywhere else, has the sim manager disabled, bootloader not unlockable.
From all the searching i did today, which was horrible, i just wanted to verify in a last ditch effort before sending it back.
The only way i found to enable esim is to modify the features.xml (from sounds of it). However to do so you need root, and of course it appears root requires unlocked bootloader(unless i missed something somewhere)
I have been unable to find a way to unlock bootloader(am i wrong?)
I havent found root (without unlocked bootloader)
Edit- nvm i found what i was looking for
Click to expand...
Click to collapse
did you manage to unlock Esim. I have same issue. I need to know hot to enable esim
axelrade said:
did you manage to unlock Esim. I have same issue. I need to know hot to enable esim
Click to expand...
Click to collapse
So far, no go on the esim. I did get unlocked etc, but it seems something else is keeping the esim inactive. I almost need a snapdragon with esim working (from another country) to compare to
skullzaflare said:
So far, no go on the esim. I did get unlocked etc, but it seems something else is keeping the esim inactive. I almost need a snapdragon with esim working (from another country) to compare to
Click to expand...
Click to collapse
Snapdragon variants aren't eSIM enabled, only Exynos devices.
I remember seeing the option enabled when you flash the Exynos magisk module on a Snapdragon device. It also gave me call recorder.
ChongoDroid said:
I remember seeing the option enabled when you flash the Exynos magisk module on a Snapdragon device. It also gave me call recorder.
Click to expand...
Click to collapse
CSC change does not appear to work on snapdragon, i already tried it.
HOWEVER, editing Build.prop in vendor did enable sim manager for me, however status is showing esim imei as unknown (yes my box has 2 imei) and the add gets stuck
skullzaflare said:
CSC change does not appear to work on snapdragon, i already tried it.
HOWEVER, editing Build.prop in vendor did enable sim manager for me, however status is showing esim imei as unknown (yes my box has 2 imei) and the add gets stuck
Click to expand...
Click to collapse
Can you specify how you accessed Build.prop and also what you edited to enable sim manager?
axelrade said:
did you manage to unlock Esim. I have same issue. I need to know hot to enable esim
Click to expand...
Click to collapse
dnldcs said:
Can you specify how you accessed Build.prop and also what you edited to enable sim manager?
Click to expand...
Click to collapse
I am rooted/unlocked
In vendor\build.prop i found "persist.radio.multisim.config=ss" which is single sim. dsds would be for dual sim. Phone would not let me modify or replace the build.prop.
With the recommendation from Orphee i installed this package in my magisk
https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-t3789228
From there it let me change that line to dsds, and thus here we are. I am unsure if dsds should be a different line for esim, or if something else is needed to "start" the esim.
Are both modules enabled ? CSC and Props config
And is there 2 IMEI written in phone About screen ? Not only the box.
View attachment 5131175
Orphee said:
Are both modules enabled ? CSC and Props config
And is there 2 IMEI written in phone About screen ? Not only the box.View attachment 5131175
Click to expand...
Click to collapse
Currently the IMEI for esim shows unknown, so it IS possible i broke that during UL/root or something, but i feel more inclined to believe it is just not enabled. On stock rom it only showed the normal IMEI
I have tried both yes
Then you must fix or find how to have the IMEI number shown in the phone menu.
Esim registration will not work until you have the IMEI number shown.
Orphee said:
Then you must fix or find how to have the IMEI number shown in the phone menu.
Esim registration will not work until you have the IMEI number shown.
Click to expand...
Click to collapse
Correct! That is where i am currently stuck lol
Download Google dialer and then enter *#*#467#*#" and there's some esim related toggles available now.
You can enable RCS here too if you know what you're doing.
ChongoDroid said:
Download Google dialer and then enter *#*#467#*#" and there's some esim related toggles available now.
You can enable RCS here too if you know what you're doing.
Click to expand...
Click to collapse
Just tried. It does not work.
insomniacandroid said:
Just tried. It does not work.
Click to expand...
Click to collapse
Dang
ChongoDroid said:
Dang
Click to expand...
Click to collapse
Do you a screenshot?
Inviato dal mio SM-G9860 utilizzando Tapatalk