Related
Kind XDA users,
As the topic implies, I'd like to downgrade this unrooted phone.
Could anyone direct me to a to a link with the proper firmware / procedure?
Will I be able to downgrade without tripping Knox?
Phone info:
Samsung Galaxy S4 Mini GT-I9195 (8GB)
Android version: 4.4.2
Baseband version: I9195XXUNCJ6
Buildnumber: KOT49H.I9195XXUCNJ6
Kernel version: 3.4.0-3093013
Perhaps I should also note why I'd like to downgrade:
For some reason the phone gives bad signal on GSM network.
It seems it is connected normally, though sometimes people reach te voicemail without any reason.
Also outgoing calls seem to fail at that time, reboot solves this temporary.
The option "GSM only" is not available under network settings.
I put the SIM-Card in another S4 Mini on v4.2.2 the option "GSM only" is available.
(I did not select it though as the plan has data, it was just the only difference I could find other than android version.)
Tested for approx 2 week and it runs fine, problems are yet to be discovered.
Edit: feel free to move this topic, did not notice I was in the general section.
Kind regards, Stefan.
Hi Stefan!
The only one option is flash ZTO-UBUBNE2 firmware(Brazil), It don't have much bloat, 90% have option to uninstall...
Good luck, MixoMaxoViper.
Thanks for the reply, could you link me to the file?
Can it be flashed with kies or only with odin?
Also will this trip Knox?
Kind regards, Stefan.
@up
http://samsung-updates.com/
Then search for I9195--->ZTU UBUBNE2
MixoMaxoViper said:
@up
http://samsung-updates.com/
Then search for I9195--->ZTU UBUBNE2
Click to expand...
Click to collapse
And for i9190?
Will this trip Knox and how is it flashed then?
Kind regards, Stefan.
Thaevil0ne said:
Will this trip Knox and how is it flashed then?
Kind regards, Stefan.
Click to expand...
Click to collapse
That rom is official samsung rom. So it will not trip knox. Extract the downloaded zip file and u get a "tar.md5" file along with a 'dll' file.
Open odin and click on PDA or AP button and choose the extracted tar.md5 file. Then flash it.
Krik88 said:
And for i9190?
Click to expand...
Click to collapse
This ZTO-UBUBNE2 rom is meant for GT-I9195. You must find a jellybean firmware with same bootloader as kitkat firmwares.
Then you can downgrade. I have i9195, so i do not know about any jellybean firmwares for I9190 that have knox 2.0 bootloader.
Thaevil0ne said:
Will this trip Knox and how is it flashed then?
Kind regards, Stefan.
Click to expand...
Click to collapse
No, KNOX will be still 0x0
Good luck!
MixoMaxoViper said:
@up
http://samsung-updates.com/
Then search for I9195--->ZTU UBUBNE2
Click to expand...
Click to collapse
Hi all,
Thanks a lot for pointing me in the right direction.
Firmware has been flashed without any problems.
Kind regards, Stefan.
sasank360 said:
That rom is official samsung rom. So it will not trip knox. Extract the downloaded zip file and u get a "tar.md5" file along with a 'dll' file.
Open odin and click on PDA or AP button and choose the extracted tar.md5 file. Then flash it.
Click to expand...
Click to collapse
Hi, my phone brand vodafone italy and I have upgrade to 4.4.2.
After flashing brasil firmware 4.2.2 it's possible flashing firmware 4.2.2 vodafone italy?
thank you
danio.78 said:
Hi, my phone brand vodafone italy and I have upgrade to 4.4.2.
After flashing brasil firmware 4.2.2 it's possible flashing firmware 4.2.2 vodafone italy?
thank you
Click to expand...
Click to collapse
Not unless you can put the bootloader from Brazilian rom to your Italian ROM but I think that would be break the knox and probably wouldn't even work anyway.
how we can know that ,which jellybean rom have the same bootloader as kitkat?(so we can downgrade)
i want it for i9190 and i9192
00ehsan00 said:
how we can know that ,which jellybean rom have the same bootloader as kitkat?(so we can downgrade)
i want it for i9190 and i9192
Click to expand...
Click to collapse
Don't think such a rom exists for those models just i9195. That's with the new boot loader. I may be wrong though...
Thaevil0ne said:
Will this trip Knox and how is it flashed then?
Kind regards, Stefan.
Click to expand...
Click to collapse
no this has the same bootloader from kitkat you will be able to flash this without problems!
---------- Post added at 02:58 PM ---------- Previous post was at 02:55 PM ----------
danio.78 said:
Hi, my phone brand vodafone italy and I have upgrade to 4.4.2.
After flashing brasil firmware 4.2.2 it's possible flashing firmware 4.2.2 vodafone italy?
thank you
Click to expand...
Click to collapse
no ONLY the ZTO 4.2.2 hast the v2 bootloader. other 4.2.2 will fail install and maybe trigger knox
bad news for us sniff sniff
---------- Post added at 03:46 PM ---------- Previous post was at 02:58 PM ----------
u can use this:
https://forum.xda-developers.com/showthread.php?t=2706880
this is touchwiz rom with cm like customization read it. only s4 mini lte (GT-I9195,serranoltexx)
sasank360 said:
That rom is official samsung rom. So it will not trip knox. Extract the downloaded zip file and u get a "tar.md5" file along with a 'dll' file.
Open odin and click on PDA or AP button and choose the extracted tar.md5 file. Then flash it.
This ZTO-UBUBNE2 rom is meant for GT-I9195. You must find a jellybean firmware with same bootloader as kitkat firmwares.
Then you can downgrade. I have i9195, so i do not know about any jellybean firmwares for I9190 that have knox 2.0 bootloader.
Click to expand...
Click to collapse
sir file not found what im going to use ? my phone is from finland can i use diffrent rom except for NEE(finland) region
I can't downgrade mine (GT-i9190), knox doesn't allow it
Here is the stock N910TUVU2EPJ2 Marshmallow firmware for the N910T hosted on the much quicker Android File Host.
(I left the older N910TUVU2EPE3 & N910TUVS2EPG2 for anyone that still wanted to still download it)
Download this before you start messing with Xposed, rooting, kernels, or recoveries.
Use this to recover from soft bricks!
Flash with Odin (check out the several other guides on these forums for information on how to flash with Odin.)
Enjoy!
PJ2 Stock Firmware (Latest)
N910T N910TUVU2EPJ2 6.0.1 Stock Firmware
PG2 Stock Firmware
N910T N910TUVS2EPG2 6.0.1 Stock Firmware
PE3 Stock Firmware (Initial MM Firmware)
N910T N910TUVU2EPE3 6.0.1 Stock Firmware
N910T3 N910T3UVU2EPE3 6.0.1 Stock Firmware
Additional info:
Root/Recovery
Xposed
Thanks to Samsung and AFH!
thanks bro
Can you please extract the bootloader and modem?
ALLDAT said:
Can you please extract the bootloader and modem?
Click to expand...
Click to collapse
kyoji001 said:
I -think- I've extracted the bootloader and modem from this build:
BL: https://dl.dropboxusercontent.com/u/418103/N910TUVU2EPE3_BL.tar
CP: https://dl.dropboxusercontent.com/u/418103/N910TUVU2EPE3_CP.tar
BL is aboot.mbn, rpm.mbn, sb1.mbn, sdi.mbn, tz.mbn
CP is modem.bin, NON-HLOS.bin.
Can someone more experienced confirm this is correct?
I have -not- flashed this on my own device, so I would have to advise anyone else against it!
Click to expand...
Click to collapse
Someone had made it, hope this helps. I tested it on my device so it should work, Just flash the BL under where it says BL in Odin, same goes with CP.
Has anyone tried odining this with the T3 version of the T-mobile Note 4?
Am i dreaming or TMO finally came through?
ecrudragon said:
Am i dreaming or TMO finally came through?
Click to expand...
Click to collapse
They did lol
ANy tips on rooting this?
I installed the full package.
Mister_E105 said:
ANy tips on rooting this?
I installed the full package.
Click to expand...
Click to collapse
Check out the other thread. In the OP there's a link to chainfires systemless root. It works
_Jax_ said:
Check out the other thread. In the OP there's a link to chainfires systemless root. It works
Click to expand...
Click to collapse
Do you have the link to that thread handy?
---------- Post added 29th June 2016 at 12:16 AM ---------- Previous post was 28th June 2016 at 11:23 PM ----------
Found the link!
WOW!
CF really outdid themselves! http://forum.xda-developers.com/not...overy-n910t-t3-marshmallow-pe3-guide-t3406870
Mister_E105 said:
ANy tips on rooting this?
I installed the full package.
Click to expand...
Click to collapse
Root/Recovery
Xposed
theinspector said:
Has anyone tried odining this with the T3 version of the T-mobile Note 4?
Click to expand...
Click to collapse
It should work. All the of the LP builds and roms were constantly switched between the two models.
can someone tell the battery time experience.? as on 5.1.1 its not that good , i have manually stopped some services to get better battery life. so how about this new 6.0.1 going, please share.
ruk_design said:
can someone tell the battery time experience.? as on 5.1.1 its not that good , i have manually stopped some services to get better battery life. so how about this new 6.0.1 going, please share.
Click to expand...
Click to collapse
Battery life has been great for me.
Better then 5.1.1 for me. When I say better I mean when comparing stock to stock.
I get errors extracting the Stock Firmware (on PC) with WinRAR and 7Zip. WinRAR won't extract it, "Corrupt", and 7Zip states "Warning: There are some data after end of archive". I can't get the checksum to match. Multiple download attempts.
Ideas?
DeeXii said:
Root/Recovery
Xposed
Click to expand...
Click to collapse
Thank you!
Pinan said:
I get errors extracting the Stock Firmware (on PC) with WinRAR and 7Zip. WinRAR won't extract it, "Corrupt", and 7Zip states "Warning: There are some data after end of archive". I can't get the checksum to match. Multiple download attempts.
Ideas?
Click to expand...
Click to collapse
Where are you getting it from? Thats odd.
Gracias por compartir
Muchas Gracias Bro.. :bueno:
I love cm 12, if I upgrade to this firmware, will I be able to go back to my cm 12 ROM? I've made a full nandroid backup of my N910T on cm12.
_Jax_ said:
Where are you getting it from? Thats odd.
Click to expand...
Click to collapse
bad download, try again...
Hey i have A5 2017 running indian 7.0 firmware.screenshot attached with full details of firmware.
My Question is i have flashed 7.0 indian on uae firmware.Which oreo update is safe to flash in my phone?
Can i downgrade back to 7.0 ins if i wanted after installing oreo please help?
I have rooted my mobile to get permission to save sdcard directly.but it still saves downloads in /android/data/com....etc.How do get write permission in exsdcard directly.I have tried Es root explorer and gave permission.Its not working.Any reply will be really appreciated.I have added screenshot!
Thanks.
For example I have A320FL and I took SER(Russian) firmware for A320F with 8.0.0.. I didn't flashed it via odin, but I extracted from AP "system.img" and "boot.img" and flashed those in TWRP.
I think this is more safe..
Ser 8.0 is not available for a5 2017.which country you suggest me to download?.I want csc to be unchanged so that i got volte?(voice over lte is calling future)what was previous version of rom ,I mean which country varient?.Can you elaborate how you done it?Deos root and twrp still works.Thank you for the replay.
Pagan_Serpent said:
For example I have A320FL and I took SER(Russian) firmware for A320F with 8.0.0.. I didn't flashed it via odin, but I extracted from AP "system.img" and "boot.img" and flashed those in TWRP.
I think this is more safe..
Click to expand...
Click to collapse
sir, i want to ask you, is the SER firmware works for A320Y version?
because there are no android 8.0 for A320Y yet. and also for A320F itself for other country except Russia.
thanks
Any one please replay which country oreo firmware should i flash?. am on multi csc ins 7.0.
I just want to say that it's not Q&A section
Skorupsi said:
I just want to say that it's not Q&A section
Click to expand...
Click to collapse
savage
Where can I get answer for this??
Full ODIN stock ATT files.
Download one file and unzip to md5 format. Put in ODIN and flash.
I take no responsibility if anything goes wrong. You don't need to be on certain baseband to flash this, you can flash this directly from any baseband version.
What's changing: Android device security updates
Android version: 7.0
Security patch level (SPL): August 1, 2018
Baseband version: G928AUCS6ERH1
Build number: NRD90M.G928AUCS6ERH1
Download link: https://androidfilehost.com/?fid=11410963190603911443
Download link for Odin3_v3.12.3: https://odindownload.com/download/Odin3_v3.12.3.zip
If i helped you don't forget to hit thanks button.
any good
Has anyone had any luck with this zip?
---------- Post added at 07:52 AM ---------- Previous post was at 07:45 AM ----------
these are the only s6edge+ files I can find. all others are 404. Can senior member confirm this zip? I cant tweek my phone until I have factory firmware to fall back on.
jaketake80 said:
Has anyone had any luck with this zip?
---------- Post added at 07:52 AM ---------- Previous post was at 07:45 AM ----------
these are the only s6edge+ files I can find. all others are 404. Can senior member confirm this zip? I cant tweek my phone until I have factory firmware to fall back on.
Click to expand...
Click to collapse
This is the official firmware for s6 edge+ i pulled out from at&t servers. You can flash it without problems
tks so much, i'm trying to look for this rom for 5 minutes, all other sites require payment @@
do u have the latest stock rom from june?
immortel_la said:
tks so much, i'm trying to look for this rom for 5 minutes, all other sites require payment @@
do u have the latest stock rom from june?
Click to expand...
Click to collapse
You mean this build right G928AUCS5ERF2?
https://forum.xda-developers.com/at...general/g9258-nougat-7-0-1-stock-att-t3812242
stek-kravari said:
Full ODIN stock ATT files.
Download one file and unzip to md5 format. Put in ODIN and flash.
I take no responsibility if anything goes wrong. You don't need to be on certain baseband to flash this, you can flash this directly from any baseband version to this.
AP_G928AUCS5ERD1_CL12579816_QB17628850_REV00_user_low_ship_meta.tar.md5
BL_G928AUCS5ERD1_CL12579816_QB17628850_REV00_user_low_ship.tar.md5
CP_G928AUCS5ERD1_CP9394655_CL12579816_QB17628850_REV00_user_low_ship.tar.md5
CSC_ATT_G928AATT5ERD1_CL12579816_QB17628850_REV00_user_low_ship.tar.md5
What's changing: Android device security updates
Android version: 7.0
Security patch level (SPL): April 1, 2018
Baseband version: G928AUCS5ERD1
Build number: NRD90M.G928AUCS5ERD1
Download link: "https://drive.google.com/uc?id=1WPSXlfRMaZPnunrrU6BKHjCK5JvaT0UX&export=download"]https://drive.google.com/uc?id=1WPSXlfRMaZPnunrrU6BKHjCK5JvaT0UX&export=download
If i helped you don't forget to hit thanks button.
Click to expand...
Click to collapse
which version of odin should i use?
i have 2 times download it and file is corruppt
Pokpokan said:
which version of odin should i use?
i have 2 times download it and file is corruppt
Click to expand...
Click to collapse
torrent link added, try downloading again via torrent
mirror: https://xdacloud.com/download/s1
verified, file is not corrupt.
Hello guys, in advance I apologize for my ignorance, but I have my cell in this version: G928AUCU1AOGG, that is, it has never been updated. This method serves me or should I first upload to a different version?
Thanks for any help you can give me.
limo2x said:
Hello guys, in advance I apologize for my ignorance, but I have my cell in this version: G928AUCU1AOGG, that is, it has never been updated. This method serves me or should I first upload to a different version?
Thanks for any help you can give me.
Click to expand...
Click to collapse
This is full firmware, you can flash it with Odin
Might add to use Odin version 3.12
Is there any way to root 7.0?
Thank you so much for this post.
Last month I did the update following your instructions and I did not have any problems.
Now the life time of the battery is almost tripled and applications run much better.
Make a change to the WiFi configuration, so that it will not be disconnected every time the screen is blocked.
In general, the performance of the equipment increased considerably.
Again thank you very much.
gunermahir1 said:
Is there any way to root 7.0?
Click to expand...
Click to collapse
Currently searching for root method myself. Either that or debranding.
I am from india If i upgrade my unlocked s6 edge plus at&t to nougat.After update I will still unlocked or not please reply sir
sumershaha said:
I am from india If i upgrade my unlocked s6 edge plus at&t to nougat.After update I will still unlocked or not please reply sir
Click to expand...
Click to collapse
Your phone will be unlocked no matter what firmware you flash
stek-kravari said:
Your phone will be unlocked no matter what firmware you flash
Click to expand...
Click to collapse
ok thanks sir now i will try
I successfully updated
Link updated with latest G928A firmware G928AUCS6ERH1
Dear sir please tell me can I flash Indian firmware on it ?
Hi All,
Here is the Full S10+ G975FXXU1ASAT Fimrware .
Note:- This firmware is not demo even though the name shows FXX..
Details
AP:-AP_G975FXXU1ASAT_CL15231014_QB21824975_REV01_user_low_ship_meta_OS9.tar
CP:-CP_G975FXXU1ASAT_CP11810715_CL15231014_QB21824975_REV01_user_low_ship.tar
CSC:-CSC_OMC_OXM_G975FOXM1ASAT_CL15231014_QB21824975_REV01_user_low_ship.tar
BL:- BL_G975FXXU1ASAT_CL15231014_QB21824975_REV01_user_low_ship.tar
Here is the Full S10eG970FXXU1ASAT Fimrware .
AP:-AP_G970FXXU1ASAT_CL15231014_QB21824972_REV01_user_low_ship_meta_OS9.tar.md5
CP:-CP_G970FXXU1ASAT_CP11810712_CL15231014_QB21824972_REV01_user_low_ship.tar.md5
CSC:-CSC_OMC_OXM_G970FOXM1ASAT_CL15231014_QB21824972_REV01_user_low_ship.tar_3.md5
BL:-BL_G970FXXU1ASAT_CL15231014_QB21824972_REV01_user_low_ship.tar.md5
Here is the Full S10 G973FXXU1ASBA Fimrware .
AP:-AP_G973FXXU1ASBA_CL15445945_QB22242603_REV01_user_low_ship_meta_OS9.tar.md5
CP:-CP_G973FXXU1ASBA_CP12016348_CL15445945_QB22242603_REV01_user_low_ship.tar.md5
CSC:-CSC_OMC_OXM_G973FOXM1ASBA_CL15445945_QB22242603_REV01_user_low_ship.tar.md5
BL:-BL_G973FXXU1ASBA_CL15445945_QB22242603_REV01_user_low_ship.tar.md5
Download
https://drive.google.com/open?id=1gQspkZjujBCu0Q69oGi0Eaqj6b3EybAQ
wow amazing...!! ˃ᴗ˂
What’s the difference between this and G975F?
Colmdave said:
What’s the difference between this and G975F?
Click to expand...
Click to collapse
I hope it's the same
seems to be the S10X version if im right?
blackpanther0582 said:
Hi All,
Here is the Full S10+ G975FXXU1ASAT Fimrware .
Click to expand...
Click to collapse
Thanks. I've downloaded it.
I extracted the boot.img from the AP file and pulled the kernel config from the zImage. Interesting to see what's going to be in the stock kernel, which is 4.14.85.
ianmacd said:
Thanks. I've downloaded it.
I extracted the boot.img from the AP file and pulled the kernel config from the zImage. Interesting to see what's going to be in the stock kernel, which is 4.14.85.
Click to expand...
Click to collapse
How to extract the kernel config from the zImage friends?
ianmacd said:
Thanks. I've downloaded it.
I extracted the boot.img from the AP file and pulled the kernel config from the zImage. Interesting to see what's going to be in the stock kernel, which is 4.14.85.
Click to expand...
Click to collapse
hello my friend boot.img please share it for me?
I tried flashing my 10+ with this using Odin. Odin sais Passed but now my phone is stuck in download mode saying bootloader hashes do not match ???
---------- Post added 27-02-2019 at 12:00 AM ---------- Previous post was 26-02-2019 at 11:44 PM ----------
blackpanther0582 said:
Hi All,
Here is the Full S10+ G975FXXU1ASAT Fimrware .
Download Link
https://drive.google.com/open?id=1RNcZ2NO7-LUCWuVyOY_dFi7H1veq1Cun
Click to expand...
Click to collapse
Is this the G975F model? Or the 5G variant?
Colmdave said:
I tried flashing my 10+ with this using Odin. Odin sais Passed but now my phone is stuck in download mode saying bootloader hashes do not match ???
---------- Post added 27-02-2019 at 12:00 AM ---------- Previous post was 26-02-2019 at 11:44 PM ----------
Is this the G975F model? Or the 5G variant?
Click to expand...
Click to collapse
It can be possibly SD version .but how come it's.success anyways it won't even start in odin..the firmware posted is for Exynos chipset .if possible share an image of the bootloader so I can figure out something
blackpanther0582 said:
It can be possibly SD version .but how come it's.success anyways it won't even start in odin..the firmware posted is for Exynos chipset .if possible share an image of the bootloader so I can figure out something
Click to expand...
Click to collapse
Ok, I’ll send it on later when I’m back from work.
Guys just a little weird question ... are the sounds of the keyboard on the s10 different from before ? (on the note 8 and 9 ...) , if so where can i find them ?
Thanks !
blackpanther0582 said:
Hi All,
Here is the Full S10+ G975FXXU1ASAT Fimrware .
Download Link
https://drive.google.com/open?id=1RNcZ2NO7-LUCWuVyOY_dFi7H1veq1Cun
Click to expand...
Click to collapse
Thank You SO MUCH for your great effort!! On my S10+ works like charme
I have a question for you: do you know why, after the flash, my CSC code didn't change and got my country region?
It's very strange because itis a multi-csc firmware I saw.
P.S. If you get also g973F and g970F firmware please share it with us!
iorya984 said:
Thank You SO MUCH for your great effort!! On my S10+ works like charme
I have a question for you: do you know why, after the flash, my CSC code didn't change and got my country region?
It's very strange because itis a multi-csc firmware I saw.
P.S. If you get also g973F and g970F firmware please share it with us!
Click to expand...
Click to collapse
Yes I have both model firmware too . If needed I will upload your that too tomorrow I will create seperate thread for that :good:
iorya984 said:
Thank You SO MUCH for your great effort!! On my S10+ works like charme
I have a question for you: do you know why, after the flash, my CSC code didn't change and got my country region?
It's very strange because itis a multi-csc firmware I saw.
P.S. If you get also g973F and g970F firmware please share it with us!
Click to expand...
Click to collapse
What model is your S10+? Also did you only flash the AP in Odin or did you flash all 4 files?
Yes, please share a fw for the 973F model
blackpanther0582 said:
Hi All,
Here is the Full S10+ G975FXXU1ASAT Fimrware .
Download Link
https://drive.google.com/open?id=1RNcZ2NO7-LUCWuVyOY_dFi7H1veq1Cun
Click to expand...
Click to collapse
Okay so I flashed all 4 files you gave this time. I did NOT select repartition. Odin said passed but now it’s stuck in what seems like a charging state, there’s a black screen with charge indicator. But nothing is happening
Any link to ASBA for 975F?
blackpanther0582 said:
Yes I have both model firmware too . If needed I will upload your that too tomorrow I will create seperate thread for that :good:
Click to expand...
Click to collapse
Perfect! I got g973F so I need only the g-970F version (Multi-CSC). Let me know when it will be ready for download!
Thank you so much for your great job man!
---------- Post added at 10:51 PM ---------- Previous post was at 10:48 PM ----------
Colmdave said:
What model is your S10+? Also did you only flash the AP in Odin or did you flash all 4 files?
Click to expand...
Click to collapse
I solved the problem Colmdave. I've flashed all the partitions with SIM card inside. After flash the phone checked for the correct country and got its CSC!
This worked for g-975 and g-973 also!
iorya984 said:
Perfect! I got g973F so I need only the g-970F version (Multi-CSC). Let me know when it will be ready for download!
Thank you so much for your great job man!
---------- Post added at 10:51 PM ---------- Previous post was at 10:48 PM ----------
I solved the problem Colmdave. I've flashed all the partitions with SIM card inside. After flash the phone checked for the correct country and got its CSC!
This worked for g-975 and g-973 also!
Click to expand...
Click to collapse
Ok so the battery was just dead....After about 15 mins of being plugged into the laptop it went to 1%, then it began to reinstall firmware by itself and now seems to be working fine. Is there anyway to test it to know it is fully ok. By like restarting it a few times or something?