Full ODIN stock ATT files.
Download one file and unzip to md5 format. Put in ODIN and flash.
I take no responsibility if anything goes wrong. You don't need to be on certain baseband to flash this, you can flash this directly from any baseband version.
What's changing: Android device security updates
Android version: 7.0
Security patch level (SPL): August 1, 2018
Baseband version: G928AUCS6ERH1
Build number: NRD90M.G928AUCS6ERH1
Download link: https://androidfilehost.com/?fid=11410963190603911443
Download link for Odin3_v3.12.3: https://odindownload.com/download/Odin3_v3.12.3.zip
If i helped you don't forget to hit thanks button.
any good
Has anyone had any luck with this zip?
---------- Post added at 07:52 AM ---------- Previous post was at 07:45 AM ----------
these are the only s6edge+ files I can find. all others are 404. Can senior member confirm this zip? I cant tweek my phone until I have factory firmware to fall back on.
jaketake80 said:
Has anyone had any luck with this zip?
---------- Post added at 07:52 AM ---------- Previous post was at 07:45 AM ----------
these are the only s6edge+ files I can find. all others are 404. Can senior member confirm this zip? I cant tweek my phone until I have factory firmware to fall back on.
Click to expand...
Click to collapse
This is the official firmware for s6 edge+ i pulled out from at&t servers. You can flash it without problems
tks so much, i'm trying to look for this rom for 5 minutes, all other sites require payment @@
do u have the latest stock rom from june?
immortel_la said:
tks so much, i'm trying to look for this rom for 5 minutes, all other sites require payment @@
do u have the latest stock rom from june?
Click to expand...
Click to collapse
You mean this build right G928AUCS5ERF2?
https://forum.xda-developers.com/at...general/g9258-nougat-7-0-1-stock-att-t3812242
stek-kravari said:
Full ODIN stock ATT files.
Download one file and unzip to md5 format. Put in ODIN and flash.
I take no responsibility if anything goes wrong. You don't need to be on certain baseband to flash this, you can flash this directly from any baseband version to this.
AP_G928AUCS5ERD1_CL12579816_QB17628850_REV00_user_low_ship_meta.tar.md5
BL_G928AUCS5ERD1_CL12579816_QB17628850_REV00_user_low_ship.tar.md5
CP_G928AUCS5ERD1_CP9394655_CL12579816_QB17628850_REV00_user_low_ship.tar.md5
CSC_ATT_G928AATT5ERD1_CL12579816_QB17628850_REV00_user_low_ship.tar.md5
What's changing: Android device security updates
Android version: 7.0
Security patch level (SPL): April 1, 2018
Baseband version: G928AUCS5ERD1
Build number: NRD90M.G928AUCS5ERD1
Download link: "https://drive.google.com/uc?id=1WPSXlfRMaZPnunrrU6BKHjCK5JvaT0UX&export=download"]https://drive.google.com/uc?id=1WPSXlfRMaZPnunrrU6BKHjCK5JvaT0UX&export=download
If i helped you don't forget to hit thanks button.
Click to expand...
Click to collapse
which version of odin should i use?
i have 2 times download it and file is corruppt
Pokpokan said:
which version of odin should i use?
i have 2 times download it and file is corruppt
Click to expand...
Click to collapse
torrent link added, try downloading again via torrent
mirror: https://xdacloud.com/download/s1
verified, file is not corrupt.
Hello guys, in advance I apologize for my ignorance, but I have my cell in this version: G928AUCU1AOGG, that is, it has never been updated. This method serves me or should I first upload to a different version?
Thanks for any help you can give me.
limo2x said:
Hello guys, in advance I apologize for my ignorance, but I have my cell in this version: G928AUCU1AOGG, that is, it has never been updated. This method serves me or should I first upload to a different version?
Thanks for any help you can give me.
Click to expand...
Click to collapse
This is full firmware, you can flash it with Odin
Might add to use Odin version 3.12
Is there any way to root 7.0?
Thank you so much for this post.
Last month I did the update following your instructions and I did not have any problems.
Now the life time of the battery is almost tripled and applications run much better.
Make a change to the WiFi configuration, so that it will not be disconnected every time the screen is blocked.
In general, the performance of the equipment increased considerably.
Again thank you very much.
gunermahir1 said:
Is there any way to root 7.0?
Click to expand...
Click to collapse
Currently searching for root method myself. Either that or debranding.
I am from india If i upgrade my unlocked s6 edge plus at&t to nougat.After update I will still unlocked or not please reply sir
sumershaha said:
I am from india If i upgrade my unlocked s6 edge plus at&t to nougat.After update I will still unlocked or not please reply sir
Click to expand...
Click to collapse
Your phone will be unlocked no matter what firmware you flash
stek-kravari said:
Your phone will be unlocked no matter what firmware you flash
Click to expand...
Click to collapse
ok thanks sir now i will try
I successfully updated
Link updated with latest G928A firmware G928AUCS6ERH1
Dear sir please tell me can I flash Indian firmware on it ?
Related
Ok so here's the latest of the latest firmware. Apparently people been messing up their phones and are unable to downgrade or whatever..well this will put your phone to the latest official ATT build. (previous was OC2 ) As with any other Samsung firmware flash with odin
N910AUCU1COC4
LINK
@Sunderwear
Thanks for keeping us N910A users updated with the latest in stock roms. I figure it's a longshot but worth asking, would it be possible to get the older KitKat firmware N910AUCU1BNK3 aka NK3?
FiniteTime said:
@Sunderwear
Thanks for keeping us N910A users updated with the latest in stock roms. I figure it's a longshot but worth asking, would it be possible to get the older KitKat firmware N910AUCU1BNK3 aka NK3?
Click to expand...
Click to collapse
I see it yes..i might do it.. to downgrade to kitkat and not use older N910AUCU1ANIE ?
Sunderwear said:
I see it yes..i might do it.. to downgrade to kitkat and not use older N910AUCU1ANIE ?
Click to expand...
Click to collapse
Yes, exactly. There is a performance issue with the Gear VR and Lollipop and NK3 is required for the Gear VR, it won't work with N910AUCU1ANIE. That would be excellent if you could.
Sunderwear said:
Ok so here's the latest of the latest firmware. Apparently people been messing up their phones and are unable to downgrade or whatever..well this will put your phone to the latest official ATT build. (previous was OC2 ) As with any other Samsung firmware flash with odin
N910AUCU1COC4
LINK
Click to expand...
Click to collapse
I can confirm this works. But beware this wipes your phone. Back it up first. I didn't.
iamStrykyr said:
I can confirm this works. But beware this wipes your phone. Back it up first. I didn't.
Click to expand...
Click to collapse
thanks been waiting for this forever! :highfive::highfive::highfive::highfive:
What's the difference between c2 and c4
---------- Post added at 11:05 AM ---------- Previous post was at 10:44 AM ----------
Can u post md5 of c4
singhsidhu123 said:
What's the difference between c2 and c4
---------- Post added at 11:05 AM ---------- Previous post was at 10:44 AM ----------
Can u post md5 of c4
Click to expand...
Click to collapse
Wondering the first question myself, for the second here's what I got for the N910AUCU1COC4.zip:
md5: d9e8ddcd3363cf359ff3d7b6c8b2187f
sha1: b7753ceb238f8bab4427f0ec8b2b975209653beb
sha256: 9260faa9a1ed30c66a2b2134960849fa9fbd3ae9b1e90c343c09a6f68edca6dc
There is a performance issue with the Gear VR and Lollipop and NK3 is required for the Gear VR
We're to get nk3
Fair WARNING
FAIR WARNING DO NOT DOWNGRADE YOUR NOTE 4 AT&T
Bootloader is locked and you will cause a unstable boot loop have 2 devices here same issue due to downgrading
thanks for the coc4 to fix this your base band will go NULL
fatalfury said:
FAIR WARNING DO NOT DOWNGRADE YOUR NOTE 4 AT&T
Bootloader is locked and you will cause a unstable boot loop have 2 devices here same issue due to downgrading
thanks for the coc4 to fix this your base band will go NULL
Click to expand...
Click to collapse
I've downgraded from C4 to NIE with no issues, but on C4 now because overall I like it better.
fatalfury said:
FAIR WARNING DO NOT DOWNGRADE YOUR NOTE 4 AT&T
Bootloader is locked and you will cause a unstable boot loop have 2 devices here same issue due to downgrading
thanks for the coc4 to fix this your base band will go NULL
Click to expand...
Click to collapse
Not true, downgrading is fine as long as you follow the instructions i have done multiple times in the past with this device and with other samsung devices
Kyuta Syuko said:
I've downgraded from C4 to NIE with no issues, but on C4 now because overall I like it better.
Click to expand...
Click to collapse
how are you getting it to stick and not force OTA, I tried blocking and it came through anyways
ossito2012 said:
how are you getting it to stick and not force OTA, I tried blocking and it came through anyways
Click to expand...
Click to collapse
I think you freeze com.ws.dm in kitkat... IIRC....
Also looking for flashable N910AUCU1BNK3. After downgraded from Lollipop to KitKat, I can't use my GearVR. OTA check says I'm up to date. (Can only check once every 24 hours)
netnem said:
Also looking for flashable N910AUCU1BNK3. After downgraded from Lollipop to KitKat, I can't use my GearVR. OTA check says I'm up to date. (Can only check once every 24 hours)
Click to expand...
Click to collapse
I've been also trying to find one but can't find it anywhere. All the 4.4.4's uploaded are NIE. Checking OTA skips NK3 and goes right through lollipop. I've been wanting to use my GearVR too :crying:
catly1 said:
I've been also trying to find one but can't find it anywhere. All the 4.4.4's uploaded are NIE. Checking OTA skips NK3 and goes right through lollipop. I've been wanting to use my GearVR too :crying:
Click to expand...
Click to collapse
@Sunderwear said they were looking into it, but unless they're able to select which update they take with their methods of obtaining these tar files I'm not very hopeful they'll be able to get it.
Any new lollipop update
fatalfury said:
FAIR WARNING DO NOT DOWNGRADE YOUR NOTE 4 AT&T
Bootloader is locked and you will cause a unstable boot loop have 2 devices here same issue due to downgrading
thanks for the coc4 to fix this your base band will go NULL
Click to expand...
Click to collapse
Another user one with 2 devices wit baseband and imei null because downgrade from 5.0.1 to KK.
DO NOT DOWNGRADE!
Hey everyone. currently uploading the latest Odin package fresh off Samsung's kitchen
N920AUCU2APB2
That is the build number. It is the same as Verizon's note 5 MM update.
I do not have the ATT note 5 to test this on so when the file is uploaded I will need someone to confirm for me. Thanks!
EDIT:
HERE IS THE LINK DOWNLOAD
PLEASE MAKE A BACKUP OF YOUR DATA. THIS WILL PROBABLY DELETE YOUR STUFF. YOU'VE BEEN WARNED
I'm game...
How do I use it?
Zefr said:
How do I use it?
Click to expand...
Click to collapse
Flash with odin 3.10.7
Zefr said:
How do I use it?
Click to expand...
Click to collapse
If you have to ask this, don't use it.
Flashing now...
---------- Post added at 05:22 PM ---------- Previous post was at 05:12 PM ----------
So... This is 5.1.1
Sunderwear said:
Flash with odin 3.10.7
Click to expand...
Click to collapse
Thank you, flashing as of now.
I downloaded it and noticed that the files have same size of 5.1.1 stock files
Russ77 said:
So... This is 5.1.1
Click to expand...
Click to collapse
Russ77 said:
[/COLOR]So... This is 5.1.1
Click to expand...
Click to collapse
Yeah I got the same results.
it's got the Mm build #, device status is official, and Knox counter is 0, but it's 5.1.1
Russ77 said:
it's got the Mm build #, device status is official, and Knox counter is 0, but it's 5.1.1
Click to expand...
Click to collapse
That's confusing,how can it have a mm build # and be 5.1.1 ?
have a look.
the MM beta is N920AUCU2BPB2, this is N920AUCU2APB2. coincidentally, N920AUCU2APB2 is the version all these various root methods are based on.
so, is this maybe an unreleased update from ATT? I can't really see any differences, and the phone works fine. I'm almost tempted to try one of those root files, but frankly I'm a little tired of wiping my phone when it gets buggy like chimera did to it.
That's the purpose and the fun of testing
Russ77 said:
the MM beta is N920AUCU2BPB2, this is N920AUCU2APB2. coincidentally, N920AUCU2APB2 is the version all these various root methods are based on.
so, is this maybe an unreleased update from ATT? I can't really see any differences, and the phone works fine. I'm almost tempted to try one of those root files, but frankly I'm a little tired of wiping my phone when it gets buggy like chimera did to it.
Click to expand...
Click to collapse
I hope someone could shed some light on this
Sent from my SAMSUNG-SM-N920A using Tapatalk
wp4jot said:
That's the purpose and the phone of testing
Click to expand...
Click to collapse
by all means feel free to test it :'p
something tells me I wouldn't get super su to install anyway.
It's not "phone" but "fun".
Russ77 said:
by all means feel free to test it :'p
something tells me I wouldn't get super su to install anyway.
Click to expand...
Click to collapse
---------- Post added at 11:52 PM ---------- Previous post was at 11:48 PM ----------
I've tested those root files posted here in 5.1.1. None of them work. I flashed back the stock boot image and my N920A is still working fine. But I don't want to flash this MM Odin files because I don't want to loose everything that I have downladed. I know I can backup first, and I already did, but I prefer to wait for the official MM upgrade from AT&T.
Russ77 said:
by all means feel free to test it :'p
something tells me I wouldn't get super su to install anyway.
Click to expand...
Click to collapse
Damn well I guess it's just a "Performance" update with the same build number as other 6.0 roms. Sorry but thanks for trying
I'm calling it now we will get the update on the 13th of march.
In 4 days!!!
maheshwar said:
I'm calling it now we will get the update on the 13th of march.
Click to expand...
Click to collapse
Not Marshmallow. It's the update released today, March the 9th, for N920A.
Sunderwear said:
Hey everyone. currently uploading the latest Odin package fresh off Samsung's kitchen
N920AUCU2APB2
That is the build number. It is the same as Verizon's note 5 MM update.
I do not have the ATT note 5 to test this on so when the file is uploaded I will need someone to confirm for me. Thanks!
EDIT:
HERE IS THE LINK DOWNLOAD
PLEASE MAKE A BACKUP OF YOUR DATA. THIS WILL PROBABLY DELETE YOUR STUFF. YOU'VE BEEN WARNED
Click to expand...
Click to collapse
Here is the stock N910TUVU2EPJ2 Marshmallow firmware for the N910T hosted on the much quicker Android File Host.
(I left the older N910TUVU2EPE3 & N910TUVS2EPG2 for anyone that still wanted to still download it)
Download this before you start messing with Xposed, rooting, kernels, or recoveries.
Use this to recover from soft bricks!
Flash with Odin (check out the several other guides on these forums for information on how to flash with Odin.)
Enjoy!
PJ2 Stock Firmware (Latest)
N910T N910TUVU2EPJ2 6.0.1 Stock Firmware
PG2 Stock Firmware
N910T N910TUVS2EPG2 6.0.1 Stock Firmware
PE3 Stock Firmware (Initial MM Firmware)
N910T N910TUVU2EPE3 6.0.1 Stock Firmware
N910T3 N910T3UVU2EPE3 6.0.1 Stock Firmware
Additional info:
Root/Recovery
Xposed
Thanks to Samsung and AFH!
thanks bro
Can you please extract the bootloader and modem?
ALLDAT said:
Can you please extract the bootloader and modem?
Click to expand...
Click to collapse
kyoji001 said:
I -think- I've extracted the bootloader and modem from this build:
BL: https://dl.dropboxusercontent.com/u/418103/N910TUVU2EPE3_BL.tar
CP: https://dl.dropboxusercontent.com/u/418103/N910TUVU2EPE3_CP.tar
BL is aboot.mbn, rpm.mbn, sb1.mbn, sdi.mbn, tz.mbn
CP is modem.bin, NON-HLOS.bin.
Can someone more experienced confirm this is correct?
I have -not- flashed this on my own device, so I would have to advise anyone else against it!
Click to expand...
Click to collapse
Someone had made it, hope this helps. I tested it on my device so it should work, Just flash the BL under where it says BL in Odin, same goes with CP.
Has anyone tried odining this with the T3 version of the T-mobile Note 4?
Am i dreaming or TMO finally came through?
ecrudragon said:
Am i dreaming or TMO finally came through?
Click to expand...
Click to collapse
They did lol
ANy tips on rooting this?
I installed the full package.
Mister_E105 said:
ANy tips on rooting this?
I installed the full package.
Click to expand...
Click to collapse
Check out the other thread. In the OP there's a link to chainfires systemless root. It works
_Jax_ said:
Check out the other thread. In the OP there's a link to chainfires systemless root. It works
Click to expand...
Click to collapse
Do you have the link to that thread handy?
---------- Post added 29th June 2016 at 12:16 AM ---------- Previous post was 28th June 2016 at 11:23 PM ----------
Found the link!
WOW!
CF really outdid themselves! http://forum.xda-developers.com/not...overy-n910t-t3-marshmallow-pe3-guide-t3406870
Mister_E105 said:
ANy tips on rooting this?
I installed the full package.
Click to expand...
Click to collapse
Root/Recovery
Xposed
theinspector said:
Has anyone tried odining this with the T3 version of the T-mobile Note 4?
Click to expand...
Click to collapse
It should work. All the of the LP builds and roms were constantly switched between the two models.
can someone tell the battery time experience.? as on 5.1.1 its not that good , i have manually stopped some services to get better battery life. so how about this new 6.0.1 going, please share.
ruk_design said:
can someone tell the battery time experience.? as on 5.1.1 its not that good , i have manually stopped some services to get better battery life. so how about this new 6.0.1 going, please share.
Click to expand...
Click to collapse
Battery life has been great for me.
Better then 5.1.1 for me. When I say better I mean when comparing stock to stock.
I get errors extracting the Stock Firmware (on PC) with WinRAR and 7Zip. WinRAR won't extract it, "Corrupt", and 7Zip states "Warning: There are some data after end of archive". I can't get the checksum to match. Multiple download attempts.
Ideas?
DeeXii said:
Root/Recovery
Xposed
Click to expand...
Click to collapse
Thank you!
Pinan said:
I get errors extracting the Stock Firmware (on PC) with WinRAR and 7Zip. WinRAR won't extract it, "Corrupt", and 7Zip states "Warning: There are some data after end of archive". I can't get the checksum to match. Multiple download attempts.
Ideas?
Click to expand...
Click to collapse
Where are you getting it from? Thats odd.
Gracias por compartir
Muchas Gracias Bro.. :bueno:
I love cm 12, if I upgrade to this firmware, will I be able to go back to my cm 12 ROM? I've made a full nandroid backup of my N910T on cm12.
_Jax_ said:
Where are you getting it from? Thats odd.
Click to expand...
Click to collapse
bad download, try again...
It's great to see this time we can upgrade to the Nougat so quickly. Thanks @norbarb very much.
This package can help you upgrade to the latest version:N920AUCU4EQC5 more quickly.
that's link of PL1:
https://mega.nz/#!VEYWwISC!aJHboOPEmLVvgLxc_jXYrZzaSxgcXd20jMDkx2FE51o
PL1-QA1:
https://mega.nz/#!hMYDRaSL!van34jX5Yd35gc72wd9sEAj02JwJgRRdZQ-vp2HVw0M
QA1-QB2:
https://forum.xda-developers.com/att-galaxy-note5/general/february-security-plus-t3563086
QB2- Nougat:
https://forum.xda-developers.com/att-galaxy-note5/general/nougat-n920a-t-servers-t3574757
Tomorrow I will upload the N920AUCS4CQA1, that's package just need OTA to QA2 and update to Nougat.
smxwang said:
It's great to see this time we can upgrade to the Nougat so quickly. Thanks @norbarb very much.
This package can help you upgrade to the latest version:N920AUCU4EQC5 more quickly.
that's link:
https://mega.nz/#!VEYWwISC!aJHboOPEmLVvgLxc_jXYrZzaSxgcXd20jMDkx2FE51o
Tomorrow I will upload the N920AUCS4CQA1, that's package just need OTA to QA2 and update to Nougat.
Click to expand...
Click to collapse
There is no update to QA2. All you need is QB2. BTW i got QA1 to EQC5 (nougat update)
norbarb said:
There is no update to QA2. All you need is QB2. BTW i got QA1 to EQC5 (nougat update)
Click to expand...
Click to collapse
Yes, I'm very confused that QB2 packages has not been uploaded the data. The lastest package was QA1.....
By the way, how do you feel about QC5? Just as Andrew M on first test package PE5?
norbarb said:
There is no update to QA2. All you need is QB2. BTW i got QA1 to EQC5 (nougat update)
Click to expand...
Click to collapse
Now, I am downloading the QA1, soon I will upload to mega, use that maybe most quickly to update to Nougat.
smxwang said:
Yes, I'm very confused that QB2 packages has not been uploaded the data. The lastest package was QA1.....
By the way, how do you feel about QC5? Just as Andrew M on first test package PE5?
Click to expand...
Click to collapse
What you mean about QB2? I have update QA1 to QB2 if you looking for one.
QC5 it maybe final product. I don't see any other updates from QB2 to XXX. Firs i see is QB2 to QC2 ( first nougat ) then QB2 to QC4 and last one QB2 to QC5 with i post is. All this are updates to firmware and there is no other security patch as of now on servers. On other hand for other devices like Note 4(N910A) i got just security patch for next month, on S6, (G920A), S6EDGE(G925A) and S6Edge+(G928A) there are security patches too. So i feel good about that QC5 for N2920A maybe final release.
norbarb said:
What you mean about QB2? I have update QA1 to QB2 if you looking for one.
QC5 it maybe final product. I don't see any other updates from QB2 to XXX. Firs i see is QB2 to QC2 ( first nougat ) then QB2 to QC4 and last one QB2 to QC5 with i post is. All this are updates to firmware and there is no other security patch as of now on servers. On other hand for other devices like Note 4(N910A) i got just security patch for next month, on S6, (G920A), S6EDGE(G925A) and S6Edge+(G928A) there are security patches too. So i feel good about that QC5 for N2920A maybe final release.
Click to expand...
Click to collapse
In fact, I means I don't see QB2 full packages in my data, can you tell me which web you can get this OTA informations?
By the way, ATT update suddenly becomes quickly, my g891a get nougat almost with g930a and other S7 model. In the last years, N920A G920\G925\G928A G930\935A even G890\891A get everymonth update and get newest android verizon,that's amazing.....
smxwang said:
In fact, I means I don't see QB2 full packages in my data, can you tell me which web you can get this OTA informations?
By the way, ATT update suddenly becomes quickly, my g891a get nougat almost with g930a and other S7 model. In the last years, N920A G920\G925\G928A G930\935A even G890\891A get everymonth update and get newest android verizon,that's amazing.....
Click to expand...
Click to collapse
From ATT servers.
smxwang said:
It's great to see this time we can upgrade to the Nougat so quickly. Thanks @norbarb very much.
This package can help you upgrade to the latest version:N920AUCU4EQC5 more quickly.
that's link of PL1:
https://mega.nz/#!VEYWwISC!aJHboOPEmLVvgLxc_jXYrZzaSxgcXd20jMDkx2FE51o
PL1-QA1:
https://mega.nz/#!hMYDRaSL!van34jX5Yd35gc72wd9sEAj02JwJgRRdZQ-vp2HVw0M
QA1-QB2:
https://forum.xda-developers.com/att-galaxy-note5/general/february-security-plus-t3563086
QB2- Nougat:
https://forum.xda-developers.com/att-galaxy-note5/general/nougat-n920a-t-servers-t3574757
Tomorrow I will upload the N920AUCS4CQA1, that's package just need OTA to QA2 and update to Nougat.
Click to expand...
Click to collapse
Only the first file is for odin!
There isn't nougat for upload with odin too?
smxwang said:
that's link of PL1:
https://mega.nz/#!VEYWwISC!aJHboOPEmLVvgLxc_jXYrZzaSxgcXd20jMDkx2FE51o
PL1-QA1:
Click to expand...
Click to collapse
This wiped my phone after it rebooted from ODIN (for anyone else who was wondering)
Anonymously_Unknown said:
This wiped my phone after it rebooted from ODIN (for anyone else who was wondering)
Click to expand...
Click to collapse
Every ADB sideload or ODIN file will wipe your phone. There is nothing new in this area.
Can anyone upload QA1 for ODIN in MEGA ? please
My Internet just download from MEGA because its fast and the other links very slowly. ..
saif_electronic said:
Can anyone upload QA1 for ODIN in MEGA ? please
Because my Internet is very slowly. ...
My Internet just download from MEGA because its fast and the other links very slowly. ..
Click to expand...
Click to collapse
QA1 is uploading
smxwang said:
QA1 is uploading
Click to expand...
Click to collapse
Thanks ...you're good man. ..great job
Will be available a full Nougat Odin version?
Thanks for all!!!!
saif_electronic said:
Thanks ...you're good man. ..great job
Click to expand...
Click to collapse
https://forum.xda-developers.com/at...l/odin-package-n920aucs4cqa1-help-to-t3576157
Done!
norbarb said:
Every ADB sideload or ODIN file will wipe your phone.
Click to expand...
Click to collapse
I've NEVER had an ODIN file wipe my phone before. They usually just do a dirty update. while keeping my data intact.
Anonymously_Unknown said:
I've NEVER had an ODIN file wipe my phone before. They usually just do a dirty update. while keeping my data intact.
Click to expand...
Click to collapse
If Odin changes your CSC code during the flash operation the handset does a wipe. Always
I didn't remember about the CSC. Why would the CSC need to change if the ROM is made for the same AT&T carrier region?
smxwang said:
https://forum.xda-developers.com/at...l/odin-package-n920aucs4cqa1-help-to-t3576157
Done!
Click to expand...
Click to collapse
Thankxxxx...great job
Help
Ive been following every step from every post and i cant seem to figure it out. If someone who has done this successfully could jump on discord or some voip that would be great. Thanks in advance.
See Post #2 for the Link to Odin Files
It doesn't appear that Firmware.Science is updating their site any longer. I'm removing the link since it's useless to us now. I'll continue to try and get the Odin files as they drop and add them to post #2 for everyone
Understanding the Firmware labels
Here's a better understanding of how these are broken down
G=Galaxy S series
975U or F etc, the model of device
SQ, FX etc = CPU and model specific
U,S,E = Update, Security, Engineering, respectively
1,2,3,4,5 etc = bootloader rev(this is important!)
A = Pie rev 1(This starts off with "A" as the build that is the initially shipped on the device. S10 series is Pie)
(If you ever see a build that contains a "Z" such as this: U5ZSBA, that means the build is part of Samsung's Official Beta program. The "Z" in this context replaces the Android Version letter which hides what OS it actually is.)
R,S,T = Year (R is 2018, S is 2019, T will be 2020)
A,B,C etc = month (January A - December L).
1 - 9 and then A - Z =build compilation. This basically means how many builds there are in a month. They start at 1 and go to Z.
So G975USQU1ASBA would be
G975-U-SQ-U-1-A-S-B-A
G975U (Galaxy S10+ Carrier version), SQ (Snapdragon), U (Update), 1 (Bootloader version), A (Build Pie), S (2019), B (February), A (Build)
**You CANNOT downgrade to a lower Bootloader. So if you are on a Bootloader 2 rom, you can not go to a Bootloader 1 rom.
Current AT&T Stock - DTF6 July 1, 2020 Security Patch
Stock Odin Files
G975USQS4DTF6 LINK July Security Patch ATT/TMB/SPR
G975USQU3DTF1 LINK USC June 1
G975USQS3DTD5 LINK TMB June 1
G975USQU3DTE8 LINK ATT and SPR June1
G975USQS2BSIV LINK
G975USQS2ASGB LINK
G975USQU2ASG8 LINK
G975USQU1ASD9 LINK
G975USQU1ASD3 LINK
G975USQU1ASBA LINK
Use this version of Odin when flashing the above files
Odin3_v3.13.3b: HERE
I think it can also help to go into recovery and do a couple factory resets before flashing a Firmware.
Might need this one too, you never know
How come when I check for an update it's says I'm up to date but I have build ASAT?
acidburn76 said:
How come when I check for an update it's says I'm up to date but I have build ASAT?
Click to expand...
Click to collapse
I used the firmware science website to update my 975U1 to 975U1UEU1ASBA how long should it take on the starting Android screen? I dirty flashed may have to reset then flash...
acidburn76 said:
How come when I check for an update it's says I'm up to date but I have build ASAT?
Click to expand...
Click to collapse
They can roll them out in waves. You can try to clear cache and data in the Software Update app
charrog said:
I used the firmware science website to update my 975U1 to 975U1UEU1ASBA how long should it take on the starting Android screen? I dirty flashed may have to reset then flash...
Click to expand...
Click to collapse
It should typically not take TOO long. I would recommend a reset if you're having issues
kangi26 said:
It should typically not take TOO long. I would recommend a reset if you're having issues
Click to expand...
Click to collapse
Ok that worked now have ASBA does that mean when AT&T push updates my phone will get them?
Thanks.
kangi26 said:
Might need this one too, you never know
Click to expand...
Click to collapse
Jus t got OTA Version: ASBA
I do not know what changed..... I can't find the changelog. I'm with AT&T still on Feb, 1st Security patch as well.. Anybody know what has changed????
charrog said:
Ok that worked now have ASBA does that mean when AT&T push updates my phone will get them?
Thanks.
Click to expand...
Click to collapse
Not if you've flashed G975U1UEU1ASBA, that is a Unlocked Firmware. G975USQU1ASBA is the Carrier version and you would get OTA (AT&T/Spr/T-Mo/AZW)
iteam said:
Jus t got OTA Version: ASBA
I do not know what changed..... I can't find the changelog. I'm with AT&T still on Feb, 1st Security patch as well.. Anybody know what has changed????
Click to expand...
Click to collapse
I had read that, aside from the basic security patch, they made some improvements to the fingerprint scanner (and I'll have to go look for what else, I dont remember right now)
kangi26 said:
I had read that, aside from the basic security patch, they made some improvements to the fingerprint scanner (and I'll have to go look for what else, I dont remember right now)
Click to expand...
Click to collapse
Hmmm My feb 1st security patch was the same before and after the OTA....
thanks
---------- Post added at 02:25 PM ---------- Previous post was at 01:35 PM ----------
kangi26 said:
Not if you've flashed G975U1UEU1ASBA, that is a Unlocked Firmware. G975USQU1ASBA is the Carrier version and you would get OTA (AT&T/Spr/T-Mo/AZW)
Click to expand...
Click to collapse
With my unlocked phone will there be any issues if I download and flash the G975USQU1ASBA version?
Thanks
They made some tweaks to the camera to improve quality too.
ARGGG! Thought I might have included the front camera ring notifications simpler than the APK on the Play store.
LINK:
https://play.google.com/store/apps/details?id=com.used.aoe
charrog said:
thanks
---------- Post added at 02:25 PM ---------- Previous post was at 01:35 PM ----------
With my unlocked phone will there be any issues if I download and flash the G975USQU1ASBA version?
Thanks
Click to expand...
Click to collapse
If you've got an AT&T SIM, then there should be no issues at all. You will get the AT&T bloat, but you can disable it and you will also get the "features" like Wi-Fi calling...
kangi26 said:
If you've got an AT&T SIM, then there should be no issues at all. You will get the AT&T bloat, but you can disable it and you will also get the "features" like Wi-Fi calling...
Click to expand...
Click to collapse
Thanks I can deal with the bloat, quick question later if I decide to go back to another firmware will that be an issue?
Thanks
charrog said:
Thanks I can deal with the bloat, quick question later if I decide to go back to another firmware will that be an issue?
Thanks
Click to expand...
Click to collapse
It shouldn't be an issue (aside from having to set up again)
kangi26 said:
It shouldn't be an issue (aside from having to set up again)
Click to expand...
Click to collapse
Thanks again
My build is still showing asat and up to date. Cleared data and cache. Oh well guess I'll have to wait.