Related
Kind XDA users,
As the topic implies, I'd like to downgrade this unrooted phone.
Could anyone direct me to a to a link with the proper firmware / procedure?
Will I be able to downgrade without tripping Knox?
Phone info:
Samsung Galaxy S4 Mini GT-I9195 (8GB)
Android version: 4.4.2
Baseband version: I9195XXUNCJ6
Buildnumber: KOT49H.I9195XXUCNJ6
Kernel version: 3.4.0-3093013
Perhaps I should also note why I'd like to downgrade:
For some reason the phone gives bad signal on GSM network.
It seems it is connected normally, though sometimes people reach te voicemail without any reason.
Also outgoing calls seem to fail at that time, reboot solves this temporary.
The option "GSM only" is not available under network settings.
I put the SIM-Card in another S4 Mini on v4.2.2 the option "GSM only" is available.
(I did not select it though as the plan has data, it was just the only difference I could find other than android version.)
Tested for approx 2 week and it runs fine, problems are yet to be discovered.
Edit: feel free to move this topic, did not notice I was in the general section.
Kind regards, Stefan.
Hi Stefan!
The only one option is flash ZTO-UBUBNE2 firmware(Brazil), It don't have much bloat, 90% have option to uninstall...
Good luck, MixoMaxoViper.
Thanks for the reply, could you link me to the file?
Can it be flashed with kies or only with odin?
Also will this trip Knox?
Kind regards, Stefan.
@up
http://samsung-updates.com/
Then search for I9195--->ZTU UBUBNE2
MixoMaxoViper said:
@up
http://samsung-updates.com/
Then search for I9195--->ZTU UBUBNE2
Click to expand...
Click to collapse
And for i9190?
Will this trip Knox and how is it flashed then?
Kind regards, Stefan.
Thaevil0ne said:
Will this trip Knox and how is it flashed then?
Kind regards, Stefan.
Click to expand...
Click to collapse
That rom is official samsung rom. So it will not trip knox. Extract the downloaded zip file and u get a "tar.md5" file along with a 'dll' file.
Open odin and click on PDA or AP button and choose the extracted tar.md5 file. Then flash it.
Krik88 said:
And for i9190?
Click to expand...
Click to collapse
This ZTO-UBUBNE2 rom is meant for GT-I9195. You must find a jellybean firmware with same bootloader as kitkat firmwares.
Then you can downgrade. I have i9195, so i do not know about any jellybean firmwares for I9190 that have knox 2.0 bootloader.
Thaevil0ne said:
Will this trip Knox and how is it flashed then?
Kind regards, Stefan.
Click to expand...
Click to collapse
No, KNOX will be still 0x0
Good luck!
MixoMaxoViper said:
@up
http://samsung-updates.com/
Then search for I9195--->ZTU UBUBNE2
Click to expand...
Click to collapse
Hi all,
Thanks a lot for pointing me in the right direction.
Firmware has been flashed without any problems.
Kind regards, Stefan.
sasank360 said:
That rom is official samsung rom. So it will not trip knox. Extract the downloaded zip file and u get a "tar.md5" file along with a 'dll' file.
Open odin and click on PDA or AP button and choose the extracted tar.md5 file. Then flash it.
Click to expand...
Click to collapse
Hi, my phone brand vodafone italy and I have upgrade to 4.4.2.
After flashing brasil firmware 4.2.2 it's possible flashing firmware 4.2.2 vodafone italy?
thank you
danio.78 said:
Hi, my phone brand vodafone italy and I have upgrade to 4.4.2.
After flashing brasil firmware 4.2.2 it's possible flashing firmware 4.2.2 vodafone italy?
thank you
Click to expand...
Click to collapse
Not unless you can put the bootloader from Brazilian rom to your Italian ROM but I think that would be break the knox and probably wouldn't even work anyway.
how we can know that ,which jellybean rom have the same bootloader as kitkat?(so we can downgrade)
i want it for i9190 and i9192
00ehsan00 said:
how we can know that ,which jellybean rom have the same bootloader as kitkat?(so we can downgrade)
i want it for i9190 and i9192
Click to expand...
Click to collapse
Don't think such a rom exists for those models just i9195. That's with the new boot loader. I may be wrong though...
Thaevil0ne said:
Will this trip Knox and how is it flashed then?
Kind regards, Stefan.
Click to expand...
Click to collapse
no this has the same bootloader from kitkat you will be able to flash this without problems!
---------- Post added at 02:58 PM ---------- Previous post was at 02:55 PM ----------
danio.78 said:
Hi, my phone brand vodafone italy and I have upgrade to 4.4.2.
After flashing brasil firmware 4.2.2 it's possible flashing firmware 4.2.2 vodafone italy?
thank you
Click to expand...
Click to collapse
no ONLY the ZTO 4.2.2 hast the v2 bootloader. other 4.2.2 will fail install and maybe trigger knox
bad news for us sniff sniff
---------- Post added at 03:46 PM ---------- Previous post was at 02:58 PM ----------
u can use this:
https://forum.xda-developers.com/showthread.php?t=2706880
this is touchwiz rom with cm like customization read it. only s4 mini lte (GT-I9195,serranoltexx)
sasank360 said:
That rom is official samsung rom. So it will not trip knox. Extract the downloaded zip file and u get a "tar.md5" file along with a 'dll' file.
Open odin and click on PDA or AP button and choose the extracted tar.md5 file. Then flash it.
This ZTO-UBUBNE2 rom is meant for GT-I9195. You must find a jellybean firmware with same bootloader as kitkat firmwares.
Then you can downgrade. I have i9195, so i do not know about any jellybean firmwares for I9190 that have knox 2.0 bootloader.
Click to expand...
Click to collapse
sir file not found what im going to use ? my phone is from finland can i use diffrent rom except for NEE(finland) region
I can't downgrade mine (GT-i9190), knox doesn't allow it
OTA update on my model just B130, i found B150
How to update ?
Step 1: Extract & copy UPDATE.APP to "dload" folder on SD Card (you can creat new folder name "dload" if you can't found in SD Card)
Step 2: Choose dial
*#*#2846579#*#* tap Call
ProjectMenu -> Upgrade -> SD card update -> Confirm
- Your phone will auto reboot & update
If your phone can't load to system after you install custom rom or wipe
- Shut down device
- Copy Update.app to "dload" folder on SD card
- Volume up + down + power, it will auto reflash stock fimware
Click to expand...
Click to collapse
Full stock
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1277/g104/v74004/f1/full/update.zip
Update
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1277/g104/v74001/f1/full/update.zip
You can found all stock rom of Huawei HERE
http://hwmt.ru/oth/HWFF/info/view.php?find_model=
how to flash this?? need reply asap tyhttps://forum.xda-developers.com/showthread.php?t=3550417&goto=nextnewest
goodygoods said:
how to flash this?? need reply asap tyhttps://forum.xda-developers.com/showthread.php?t=3550417&goto=nextnewest
Click to expand...
Click to collapse
did you read my post ?
how to flash in quote part
goodygoods said:
how to flash this?? need reply asap tyhttps://forum.xda-developers.com/showthread.php?t=3550417&goto=nextnewest
Click to expand...
Click to collapse
just in case in more detail.
https://forum.xda-developers.com/honor-5x/how-to/manual-ota-update-guide-update-app-t3445976
Is there any news about BLL-L22C636 Android 7 EMUI 5.0 Beta?
not yet bro
Bll-L22C636B123
Please send the specific update for this version can't find it please please please.
Bll-L22C636B123
Only this Versions
http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=Bll-l22c636&firmware_page=0
Favythewolf said:
Please send the specific update for this version can't find it please please please.
Bll-L22C636B123
Click to expand...
Click to collapse
Are you sure about the version ?? I search every where but don't find ??
Bll-L22C636B123
Yeah I am sure but I have already found it thanks anyways​
I want to flash the modem for the model Bll-L22C636B123 because I want the B4 / 1700/2100 MHz. band. Is it possible to do that using the modem firmware from mate 9 lite or gr5 2017?
Without that band I can't get connected to 4G.
By Pass Google Account 2017 security patch
https://www.youtube.com/watch?v=UU9YdLQigt0
Google Account Manager APK link
http://*******/1nGTep
Es FileExplorer APK link
http://*******/1nGTka
FRP bypass APK link
http://*******/1nGWdx
BLL-L22c636b150 please any one help me with something to update this version to Android 7.0
yaarop said:
BLL-L22c636b150 please any one help me with something to update this version to Android 7.0
Click to expand...
Click to collapse
Haven't you got the OTA yet?
No I didn't get on Huawei updater....but I updated using firmware finder and it is amazing....sorry for my English cause I am from syria ...and thank you
yaarop said:
No I didn't get on Huawei updater....but I updated using firmware finder and it is amazing....sorry for my English cause I am from syria ...and thank you
Click to expand...
Click to collapse
There is no problem with your English. Its absolutely fine buddy.
Hi, My Honor 6X (BLN-L220) is running on build number: BLN-L22C675B320 and I need to downgrade to EMUI 4.1. I downloaded the official Indian firmware from Honor forum"HONOR 6X Firmware (BLN-L22, Android 6.0, EMUI 4.1, C675B132, India Channel)" Please advise me how to flash this file. Or is there any other way to downgrade it. My device is unrooted with stock recovery.
devakk said:
Hi, My Honor 6X (BLN-L220) is running on build number: BLN-L22C675B320 and I need to downgrade to EMUI 4.1. I downloaded the official Indian firmware from Honor forum"HONOR 6X Firmware (BLN-L22, Android 6.0, EMUI 4.1, C675B132, India Channel)" Please advise me how to flash this file. Or is there any other way to downgrade it. My device is unrooted with stock recovery.
Click to expand...
Click to collapse
there is no roll back available for l22 , try once copy the update.app of firmware to dload folder in sd card and power off the phone and press three buttons and hold after vibrate release the power -- may be this works ..or you have to wait for rollback package
venugopalu007 said:
there is no roll back available for l22 , try once copy the update.app of firmware to dload folder in sd card and power off the phone and press three buttons and hold after vibrate release the power -- may be this works ..or you have to wait for rollback package
Click to expand...
Click to collapse
When can I expect a rollback package?
devakk said:
When can I expect a rollback package?
Click to expand...
Click to collapse
the serices of honor is so late in india , we cannot predict the approximately when it was.
Hello guys,
I bought J7 pro J730F from UAE.. now I'm in India so i need VoLTE.. but i can't find Working VoLTE firmware for J730F.. but J730GM has Indian firmware but i unable to flash on my J730F..
Help guys please ,
Imthi Az said:
Hello guys,
I bought J7 pro J730F from UAE.. now I'm in India so i need VoLTE.. but i can't find Working VoLTE firmware for J730F.. but J730GM has Indian firmware but i unable to flash on my J730F..
Help guys please ,
Click to expand...
Click to collapse
You need a custum csc to do it..
nikkali25 said:
You need a custum csc to do it..
Click to expand...
Click to collapse
First of all HUGE THANKS for ur reply brother?
Can u pls tell the procedure of custom csc flashing process... Pls i need ur help... Im doing business.. this is my primary device so please help asap.... Again huge thanks for ur rply bro?
Imthi Az said:
First of all HUGE THANKS for ur reply brother?
Can u pls tell the procedure of custom csc flashing process... Pls i need ur help... Im doing business.. this is my primary device so please help asap.... Again huge thanks for ur rply bro?
Click to expand...
Click to collapse
Changing csc may need root so waranty is a bit.but we will try this first so you can avoid warranty bit..send me the csc file that you downloaded..i will try to modified to flash it.
nikkali25 said:
Changing csc may need root so waranty is a bit.but we will try this first so you can avoid warranty bit..send me the csc file that you downloaded..i will try to modified to flash it.
Click to expand...
Click to collapse
Ok bro... Now im in work.. i'll send csc tonight... Can i send Indian CSC(J730GM) or my phone's CSC(J730F)
Imthi Az said:
Ok bro... Now im in work.. i'll send csc tonight... Can i send Indian CSC(J730GM) or my phone's CSC(J730F)
Click to expand...
Click to collapse
Just the indian.is your phone rooted?
nikkali25 said:
Just the indian.is your phone rooted?
Click to expand...
Click to collapse
No still not rooted... Is it compulsory to root My mob?
Imthi Az said:
No still not rooted... Is it compulsory to root My mob?
Click to expand...
Click to collapse
Send me the csc please..i made it for you
nikkali25 said:
Send me the csc please..i made it for you
Click to expand...
Click to collapse
My mobile is J730F(UAE).. i upload a CSC for J730GM(India).. please help me to work volte... Im ready to root also... Any root process procedure pls
Bro im unable to upload csc.. bcoz its size.. 121 mb
Yeaaaahhhh... I done that... I use odin... BL and CP i use J730F firmware files.. AP and CSC i use j730GM firmware files.. after i flashed just done a factory reset then BOOOOMMMM.... VoLTE working!!!!! All the indian feature works... My mobile model changed from J730F to J730GM....
Thanks bro for ur support... Can u pls give a root and twrp flaahing guide.. and also Lineage OS or any official custom os suggestions pls...
Imthi Az said:
Yeaaaahhhh... I done that... I use odin... BL and CP i use J730F firmware files.. AP and CSC i use j730GM firmware files.. after i flashed just done a factory reset then BOOOOMMMM.... VoLTE working!!!!! All the indian feature works... My mobile model changed from J730F to J730GM....
Thanks bro for ur support... Can u pls give a root and twrp flaahing guide.. and also Lineage OS or any official custom os suggestions pls...
Click to expand...
Click to collapse
J have j 7 730F can i flashing j730gm?
crotonese46 said:
J have j 7 730F can i flashing j730gm?
Click to expand...
Click to collapse
U have to download J730F and J730GM both firmware... And flash J730F's BL and CP.. and J730GM's AP and CSC(use HOME CSC of J730GM).. then got to PIT tab and select PIT file of J730F(u can extract PIT from CSC file from J730F.. HOME CSC is without pit.. CSC have a pit file inside).... Then tick AUTO REBOOT AND F.RESET AND RE PARTITION
Help with the flashing process
Imthi Az said:
U have to download J730F and J730GM both firmware... And flash J730F's BL and CP.. and J730GM's AP and CSC(use HOME CSC of J730GM).. then got to PIT tab and select PIT file of J730F(u can extract PIT from CSC file from J730F.. HOME CSC is without pit.. CSC have a pit file inside).... Then tick AUTO REBOOT AND F.RESET AND RE PARTITION
Click to expand...
Click to collapse
Hey ,
I am having the same situation as yours , i have a samsung J7 Pro bought from UAE with J730F firmware. When i try to flash it with the J730GM , i am getting the secure check fail error. I'm fairly new to the flashing process and all that and understood that we have to use J730F's BL AND CP and J730GM's AP and CSC. Not really sure where to and how to get the pit file. When i extract the firmware files , i just get AP, BL , CP , CSC and HOME_CSC. Can you help me in solving the issue ?
yohanjoseph said:
Hey ,
I am having the same situation as yours , i have a samsung J7 Pro bought from UAE with J730F firmware. When i try to flash it with the J730GM , i am getting the secure check fail error. I'm fairly new to the flashing process and all that and understood that we have to use J730F's BL AND CP and J730GM's AP and CSC. Not really sure where to and how to get the pit file. When i extract the firmware files , i just get AP, BL , CP , CSC and HOME_CSC. Can you help me in solving the issue ?
Click to expand...
Click to collapse
Ok i'll explain bro.. CSC have a inbuilt PIT file... But HOME CSC is without PIT file... So u have to open CSC file of J730F with the help of WinRar.. then only u get a PIT file of J730F... And the u extract that and insert that PIT file in Odin PIT tab...
Imthi Az said:
Ok i'll explain bro.. CSC have a inbuilt PIT file... But HOME CSC is without PIT file... So u have to open CSC file of J730F with the help of WinRar.. then only u get a PIT file of J730F... And the u extract that and insert that PIT file in Odin PIT tab...
Click to expand...
Click to collapse
Thanks a lot bro. Will try it out.
Can you give me the links for the J730F and J730GM firmwares to be used also, just to be extra sure i use the correct versions.
yohanjoseph said:
Thanks a lot bro. Will try it out.
Can you give me the links for the J730F and J730GM firmwares to be used also, just to be extra sure i use the correct versions.
Click to expand...
Click to collapse
U can dwnld from www.sammobile.com
In j730F, dwnld UAE firmware.. and In j730GM, dwnld indian version
Its faster to use samfirm exe. https://www.google.ro/amp/s/forum.x...l/tool-samfirm-samsung-firmware-t2988647/amp/
You must fill the type of your phone, the country (if you dont know thw abreviation you could find on sammobile.com). After chek manual and wait for your firmware.
Hey buddy im facing the same issue with my j7 pro.
could you please gimme your whatsapp no. so that i can connect with you easily.
i badly need to fix this issue.
Is dat method can fix my sound...bcuz my j730gm has no sound after i flash d stock rom
Hello , I need helping related to flashing samsung firmware from of different region. I have attached screenshots about my phone information and i wanna know if i can flash indian firmware on it or not. Waiting for response
Hi.
Yesterday I just flashed the newest India firmware to my A505 FN, dual sim, but that firmware is th A505F model.
The update was succesfull (via Odin), nothing bad happened.
Ahsanshhahh said:
Hello , I need helping related to flashing samsung firmware from of different region. I have attached screenshots about my phone information and i wanna know if i can flash indian firmware on it or not. Waiting for response
Click to expand...
Click to collapse
yes you can flash indian firmware i have just done it good luck
arfaoui said:
yes you can flash indian firmware i have just done it good luck
Click to expand...
Click to collapse
Whatsup with removing simcard during flashing?
Ahsanshhahh said:
Whatsup with removing simcard during flashing?
Click to expand...
Click to collapse
i have not removed it i have just flashed the firmware .
Help me converting S20 5G SCG01 Snapdragon to S20 5G G981B or U ? IS THERE ANY SOLUTION WORKAROUND FOR CONVERTING IT?
OR G981U1
UPDATE: Successfully flashed G981W ROM using CSC and AP in ODIN, Bootloader and CP Remains the original one.
how about nfc, its still work?
I didn't check wait till evening I will update here
halfperfect said:
how about nfc, its still work?
Click to expand...
Click to collapse
NFC doesn't seem to be working
Xaad1219 said:
NFC doesn't seem to be working
Click to expand...
Click to collapse
Too bad. Thanks btw
could you please tell me, after flashing new rom, E-Sim option appears? can u use esim now?
Hello @Xaad1219 , I want to do something similar to what you did. I have s20 G981N . I bought it from Korea and it was sold by SKT carrier (my phone is not locked on carrier) . I want to convert my phone to Global or Korean Unlocked (no carrier). I have snapdragon version. I am pretty new to Samsung devices. Can you help me with some research or point me to resources. Thanks in advance.
Don't blow your knox if thats the case, I am suggesting you
Hello @Xaad1219 , what about e-sim, is it work?
Nickinfinity said:
Hello @Xaad1219 , I want to do something similar to what you did. I have s20 G981N . I bought it from Korea and it was sold by SKT carrier (my phone is not locked on carrier) . I want to convert my phone to Global or Korean Unlocked (no carrier). I have snapdragon version. I am pretty new to Samsung devices. Can you help me with some research or point me to resources. Thanks in advance.
Click to expand...
Click to collapse
you odin to the oldest android 10 rom and download google phone and press the command *#*#27262826#*#* select the KOO network, it will switch to the international version without the carrier.
Xaad1219 said:
UPDATE: Successfully flashed G981W ROM using CSC and AP in ODIN, Bootloader and CP Remains the original one.
Click to expand...
Click to collapse
Can u tell detailed steps for flashing..I too have galaxy s20 SCG01 japan au variant carrier unlocked..i need to convert to G981U1 version..
Also will my sim work after flashing new firmware
File's available on net but paid its convert to global
Mr Hassan said:
File's available on net but paid its convert to global
Click to expand...
Click to collapse
which site i pay and get global rom
Xaad1219 said:
UPDATE: Successfully flashed G981W ROM using CSC and AP in ODIN, Bootloader and CP Remains the original one.
Click to expand...
Click to collapse
how tell steo by step
i have s20 scg01 i want to convert global rom i download g981w rom and flash csc and AP by odin its showing fail (secure check failit) so plz help
devasenan200 said:
Can u tell detailed steps for flashing..I too have galaxy s20 SCG01 japan au variant carrier unlocked..i need to convert to G981U1 version..
Click to expand...
Click to collapse
Hi, could you tell me if your e-sim working now?
hasanal.noman said:
Hi, could you tell me if your e-sim working now?
Click to expand...
Click to collapse
I haven't flashed yet..still in Japan rom
Any update on this and E-sim?
Xaad1219 said:
UPDATE: Successfully flashed G981W ROM using CSC and AP in ODIN, Bootloader and CP Remains the original one.
Click to expand...
Click to collapse
brother Please guide us how to change
Xaad1219 said:
UPDATE: Successfully flashed G981W ROM using CSC and AP in ODIN, Bootloader and CP Remains the original one.
Click to expand...
Click to collapse
which csc u have used , i am from india what should be my csc , currently i am running on scgo1 firmware
Partial success flashing G981N (Korea) phone with G981U1 firmware.
Use BL and CP from stock firmware with AP and HOME_CSC from U1 firmware.
Make sure binary bit is the same.
Example:
SM-G981N_KOO_G981NKSS1EUI4 [Original Stock KOO Firmware]
SM-G981U1_TMB_G981U1UEU1DUCC [ Unlocked TMB Firmware]
both of the above have binary bit 1
You may be able to cross flash with different binary bits but I haven't tested it. Try to find firmware versions that were released around the same time.
_hollywood_ said:
Partial success flashing G981N (Korea) phone with G981U1 firmware.
Use BL and CP from stock firmware with AP and HOME_CSC from U1 firmware.
Make sure binary bit is the same.
Example:
SM-G981N_KOO_G981NKSS1EUI4 [Original Stock KOO Firmware]
SM-G981U1_TMB_G981U1UEU1DUCC [ Unlocked TMB Firmware]
both of the above have binary bit 1
You may be able to cross flash with different binary bits but I haven't tested it. Try to find firmware versions that were released around the same time.
Click to expand...
Click to collapse
What about ESim or Sim Manager option? Is it showing/working?
Does anyone changed from Scg01 to any other CSC successfully ?
_hollywood_ said:
Partial success flashing G981N (Korea) phone with G981U1 firmware.
Use BL and CP from stock firmware with AP and HOME_CSC from U1 firmware.
Make sure binary bit is the same.
Example:
SM-G981N_KOO_G981NKSS1EUI4 [Original Stock KOO Firmware]
SM-G981U1_TMB_G981U1UEU1DUCC [ Unlocked TMB Firmware]
both of the above have binary bit 1
You may be able to cross flash with different binary bits but I haven't tested it. Try to find firmware versions that were released around the same time.
Click to expand...
Click to collapse
Yes i found the same binary number for scg01 but that firmware are android 10 ...is that falshing those firmware receive any updates ?