Reflashed android 6.0.1 factory image and set up my phone, enrolled in the android beta programme and got the android 7.0 update.. so I downloaded it and it started to say it would install and started to countdown to reboot but it didn't reboot and didn't install now when I check for updates it says phone is up to date.
Hi all,
I have tried to update from 29032017 to 24052017 without any success. The update would simply get stuck on the Lineage OS boot animation. After about 45 minutes, I rebooted and tried again. Same Issue.
I was forced to roll back my update to 29032017. This was fine, it managed to get past the Lineage OS but introduced a tonne of issues.
> Cannot download apps from play store
> Cannot fully extend the navigation bar
> Cannot enter Developer Options (My user doesn't have permission?)
> Cannot enter Settings > Users (No error, just does nothing).
> No notifications
It's almost like there's a profile/permission issue.
Is anyone able to advise how I can go about getting this in a working order? Unfortunately wiping the phone completely is out of the question right now. I am just after a quick fix to leave it on the 29032017 build until I get a new phone to replace this one.
Any help is appreciated!
I'm trying to get dialler funtionality on my Huawei M2 802L.
I now realised I ***** myself by manually upgrading to Marshmallow.
1.
Marshmallow removed the "Enable OEM Unlock" option.
2.
I can't update to this ROM: https://forum.xda-developers.com/me...-b207-android-6-0-marshmallow-emui-4-t3533572
In Settings -> Update -> Menu the "update locally" button is replaced by "Download latest full package".
3.
I can't find a Huawei M2 rollback package. Is there one?
What's my next move guys?
Update: I found the dial *#*#2846579#*#* trick to update thru SD card.
The problem is dialer is still down. I'm not sure how to verify the ROM install properly either.
Does anyone know an alternative way to do this: http://www.modaco.com/forums/topic/...enable-calls-on-your-vodafone-mediapad-m2-80/
RE : When you upgrade to Marshmallow...
calLsOLoIsNOob said:
I'm trying to get dialler funtionality on my Huawei M2 802L.
I now realised I ***** myself by manually upgrading to Marshmallow.
1.
Marshmallow removed the "Enable OEM Unlock" option.
2.
I can't update to this ROM: https://forum.xda-developers.com/me...-b207-android-6-0-marshmallow-emui-4-t3533572
In Settings -> Update -> Menu the "update locally" button is replaced by "Download latest full package".
3.
I can't find a Huawei M2 rollback package. Is there one?
What's my next move guys?
Update: I found the dial *#*#2846579#*#* trick to update thru SD card.
The problem is dialer is still down. I'm not sure how to verify the ROM install properly either.
Does anyone know an alternative way to do this: http://www.modaco.com/forums/topic/...enable-calls-on-your-vodafone-mediapad-m2-80/
Click to expand...
Click to collapse
Hello calLsOLoIsNOob,
Would you mind to specify what kind of issues you have with the dialer please ?
I bought my M2-801L tablet 6-8 months ago, updated it through various OTA updates until the last B208 one (if you need links check my post here -> https://forum.xda-developers.com/showpost.php?p=77201067&postcount=163 ), and never had issues of any kind with the stock dialler. I use it for daily basis calls (in and outgoing) with all features and advanced settings needed to have an optimized dialling module and HQ calls.
Indeed, what goes on Dev. options, "OEM Unlock" has disappeared from it, and agree with you it's a shame. Does the Huawei's Bootloader unlock might replace this function ?
What goes about rollback procedure, can't help much, never had to use it so far.
NB : My M2 8.0 model is EU one, don't know if there are any major differences with same model from other countries / continents / GSM Providers.
Thank you in advance for your reply.
Have a nice day.
Kind Regards.
If you want to repost this internal OTA to other websites (other than XDA itself), please ask me for permission, thanks.
Click to expand...
Click to collapse
To users who have installed this internal build, please share your experience report here if you're willing to, thanks.
If HMD will push Android 10 officially, you can install it under ADB sideload easily and link will be posted here.
Internal build version: A1N-5060-0-00WW-B01
It will be updated from: A1N-414K-0-00WW-B01, which is unreleased January 2020 Security Update.
Let me tell you how to verify:
1. Dial *#*#227#*#* to check current Version. If older than A1N-414J-0-00WW-B03, update to 414J before proceed. (Alternately, dial *#*#7837#*#* to check, proceed if displays 00WW_4_14J-B03)
FYI, 414J is December 2019 Security Update.
Alternately, you can use command "fastboot oem getversions" under fastboot mode / Download mode to check current firmware version.
2. Install A1N-414K-0-00WW-B01-414J-0-00WW-B03-update.zip with adb sideload under recovery.
3. Reboot to normal OS and recovery again - it's not over yet.
4. Install A1N-5060-0-00WW-B01-414K-0-00WW-B01-update.zip with adb sideload under recovery.
5. Reboot your phone.
That's it.
If Android 10 official update pushed publicly, link will be updated here.
Download link:
To prevent throttle error, I didn't upload them to Google Drive or other cloud storages. Sorry for inconvenience.
https://www.androidfilehost.com/?w=files&flid=303427
Just perfect for me ! ?
Thanks !
edit: but gcam doesn't work anymore, I tested several versions ...
How to revert to android 9, please ?
Can this work on TA 1004?
christophebeuvry said:
Just perfect for me !
Thanks !
edit: but gcam doesn't work anymore, I tested several versions ...
How to revert to android 9, please ?
Click to expand...
Click to collapse
Can you please list down what all works and what doesn't? The phone is kind of my daily driver.
gcam does not work
nokia camera also bug but works
some lags and restart of the interface
To subscribers:
New internal packages updated!
Existing 5060 users may apply to 5100 by installing these 4 packages:
A1N-5070-0-00WW-B01-5060-0-00WW-B01-update.zip
A1N-5080-0-00WW-B01-5070-0-00WW-B01-update.zip
A1N-5090-0-00WW-B01-5080-0-00WW-B01-update.zip
A1N-5100-0-00WW-B01-5090-0-00WW-B01-update.zip
New comers with A1N-414L-0-00WW-B01 installed (can be acknowledged by dialing *#*#227#*#* or *#*#7837#*#*) can apply this update directly:
A1N-5100-0-00WW-B01-414L-0-00WW-B01-update.zip
And for enthusiasts who're interested with A1N-5100 full dump and would like to port that to original Nokia 8, I will upload that later.
Any update on the stability of this build? I want to test it but I use this phone as my secondary.
Thank you, hikari_calyx. ?
hikari_calyx said:
To subscribers:
New internal packages updated!
Existing 5060 users may apply to 5100 by installing these 4 packages:
A1N-5070-0-00WW-B01-5060-0-00WW-B01-update.zip
A1N-5080-0-00WW-B01-5070-0-00WW-B01-update.zip
A1N-5090-0-00WW-B01-5080-0-00WW-B01-update.zip
A1N-5100-0-00WW-B01-5090-0-00WW-B01-update.zip
New comers with A1N-414L-0-00WW-B01 installed (can be acknowledged by dialing *#*#227#*#* or *#*#7837#*#*) can apply this update directly:
A1N-5100-0-00WW-B01-414L-0-00WW-B01-update.zip
And for enthusiasts who're interested with A1N-5100 full dump and would like to port that to original Nokia 8, I will upload that later.
Click to expand...
Click to collapse
Can it work in TA- 1004? I'm waitting android 10 in Nokia 8 Thank kiu so much
Hi, I installed Android 10 on my Nokia 8 sirocco and since then, impossible to make gcam work. I have tried many versions but the application closes directly. Gcam worked perfectly on android 9. Do you have any solutions? Thank you.
Hey is it possible to install this on Nokia 8(TA-1004)?
To experienced developers:
Here's the full partition dump of Android 10 for A1N.
https://www.androidfilehost.com/?fid=4349826312261769554
If you'd like to port this to Nokia 8 (NB1, TA1004/1012/1052), now it's your chance.
Note this cannot be flashed to Nokia 8 NB1 directly.
To subscriber of this topic:
Nokia 8 Sirocco just got Android 10 official update.
If you have installed A1N-5120-0-00WW-B01 build (dial *#*#7837#*#* and output might be 00WW_5_120-B01), then it's same to official build and enjoy it.
We're fetching full OTA link and update soon.
Ok,
Because I was tired of waiting for Nokia to send the OTA update to my phone, I did this manually on a device that was running the latest March security patch and Android 9 using ADB and the A1N-5120-0-00WW-B01-414M-0-00WW-B01-update.zip package.
Follow the below guide if you want to update your device as well:
- dial *#*#7837#*#* and check that software is 414m
- download adb and fastboot from Google official site ( https://dl.google.com/android/repository/platform-tools-latest-windows.zip )
- download the update ( https://androidfilehost.com/?fid=4349826312261750327 )
- reboot the phone in recovery mode and go to Apply update to ADB ( guide how to reboot to recovery: https://www.hardreset.info/devices/nokia/nokia-8-sirocco/recovery-mode/ )
- placed all the above files ( firmware and google adb abd fastboot ) in the same folder open a CMD window and use the following command: ADB sideload A1N-5120-0-00WW-B01-414M-0-00WW-B01-update.zip
- wait for the update to finish, select reboot system now and reboot the phone.
Voilla, you are running the latest Android.
Things noticed after the update:
- phone feels a little bit snappier
- interface is the same, minor icon changes bug generally is the same
- has android 10 gesture navigation which does not work with a third party launcher
To subscribers of this topic:
Here's the full OTA link of A1N-5120 build.
https://android.googleapis.com/pack.../69b78c6f6a866f314a3b50e7ac88cd10e94233e7.zip
Hi!
Can you tell me how I can flash the latest full OTA of A1N-5120 build? I'm already on this update, but my phone is fully buggy after the official OTA update. I make a factory reset with clearing cache and some other folders by boot menu and I think I was delete something important. Get me advise, please! Thanks!
rudeboy1988 said:
Hi!
Can you tell me how I can flash the latest full OTA of A1N-5120 build? I'm already on this update, but my phone is fully buggy after the official OTA update. I make a factory reset with clearing cache and some other folders by boot menu and I think I was delete something important. Get me advise, please! Thanks!
Click to expand...
Click to collapse
I also have some problems with the phone running the latest OTA and also want to flash the latest OTA from file because neither factory reset from Settings nor from Recovery menu didn't help.
I've downloaded the file from https://android.googleapis.com/packages/ota-api/nokia_a1nsprout_avenger00ww/69b78c6f6a866f314a3b50e7ac88cd10e94233e7.zip, then copied it to the root of my Sirocco and dialed *#*#874#*#* but that didn't work for me.
I read that the file should have correct name - may be that is the problem?
What is the correct name for file so that it could be accepted as an update by the phone already running the same OTA?
Hi, so I've been using this device for over a year now (got it in June 2018 I think) and it just doesn't work well anymore, Chrome freezes a lot, system isn't smooth in general, Facebook's Messenger doesn't notify me a lot of the times. I can't update to the newest version, I am currently sitting on 11.0.5.0 and it says I am up to date with everything which is clearly not true. What's the best I can do right now? Upgrade to 11.0.9.0 manually, install custom ROM or downgrade to version that actually works properly?
Thanks in advance.
Pestos said:
Hi, so I've been using this device for over a year now (got it in June 2018 I think) and it just doesn't work well anymore, Chrome freezes a lot, system isn't smooth in general, Facebook's Messenger doesn't notify me a lot of the times. I can't update to the newest version, I am currently sitting on 11.0.5.0 and it says I am up to date with everything which is clearly not true. What's the best I can do right now? Upgrade to 11.0.9.0 manually, install custom ROM or downgrade to version that actually works properly?
Thanks in advance.
Click to expand...
Click to collapse
** For Mi A2 Lite
V11.0.5→ V11.0.10.0
Here Are The Steps
1 - Unlock Bootloader (You May Skip This Step If You Don't Want To Unlock The Bootloader)
2 - Download The OTA for V11.0.10.0
Link: https://bigota.d.miui.com/V11.0.10.0.QDLMIXM/miui_DAISYGlobal_V11.0.10.0.QDLMIXM_55c39d9793_10.0.zip
3 - Copy OTA File In Memory Card
4 - Go To Recovery Mode (Power Button Volume Up) After That You Will See "No Command" Screen Just Hold Power Button Again And Then Press Volume Up Button Two Seconds And Then Free The Button.
5 - Then Select Option "Apply Update From SD Card" And Select The Path Where You Copied OTA File.
6 - Reboot
7 - Successfully Installed OTA V11.0.10.0.QDLMIXM
Now System Is Showing "Your System Is Up To Date"
Enjoy !
Is there any other, gentler way?
ancyk said:
Is there any other, gentler way?
Click to expand...
Click to collapse
No.
I have Magisk installed, do I need to uninstall it? If yes, should i do a "Restore Images" or "Complete Uninstall"?