Related
Hello everyone!
I just aquired this phone yesterday and so far, I am amazed with the screen it has.
Although, as soon as I plugged it into the charger, the phone began heating up quite a bunch. The upper frame of the phone is where the heat comes from, almost as if it's coming from the processor or some shorted circuitry.
It's not unbearable to the touch, but it's really close to, which got me really worried.
Is it normal to heat like that on that upper frame while charging and under simple browser load? It also heats up a lot while downloading stuff from the Google Play store, even if not plugged to the charger. Oddly enough, the phone doesn't seem to have throttled down and I didn't have any lags or something. I ran a 3D Mark test when the phone was charging and got really warm, it still scored over 17.5k.
There's a screenshot below for the temperatures I am getting, those were actually low, some of those sensors appeared over 65C earlier on.
Is it faulty hardware? Should I return the product? Could anyone help me? Any help is really appreciated!
Mine never gets that hot. Only warm, as I would describe it best.
I'd try for a return/swap before it's too late and something fries.
G4 temperature testing
Keep in mind it depends on your environment of course, but unless you're living in the depths of hell I seriously doubt 48c while doing nothing much isn't a hardware (SoC thermal) problem. I'd be pushing for a replacement, where'd you buy it from?
By the way 65c? Jesus even my Oneplus 2 didn't get that hot.
hyperfriend said:
Mine never gets that hot. Only warm, as I would describe it best.
I'd try for a return/swap before it's too late and something fries.
Click to expand...
Click to collapse
Yeah, I'll probably try it. I had a Xperia Z1 before and it never gave me heating problems, not to mention the battery would last an entire day with my using and watching videos. Already talked to the seller actually and the person said she'll be waiting for me to change the phone. I don't know, really; might be me and my location, it's really hot in here. Always about 30~35C+. But I still believe the phone shouldn't get that warm when charging.
I actually made a little comparison and my modem/router reaches about the same temperature as it; that is, without any cooling, the little modem gets incredibly hot to the touch.
I actually tried a few things I read around, hard/soft resetting, trying a less juicy charger (taking in consideration the one it comes with delivers 1.8 amp), tried one with 1 amp max output, still heated...
Either way, would you mind posting a screenshot like mine with your phone after some heavy usage/gaming? That'd be really helpful! Thanks in advance for replying!
Ran Antutu, midway switched to Aida and:
Do note: phone still does not feel "hot". Warm, sure. Hot, not quite :good:
Stevles said:
G4 temperature testing
Keep in mind it depends on your environment of course, but unless you're living in the depths of hell I seriously doubt 48c while doing nothing much isn't a hardware (SoC thermal) problem. I'd be pushing for a replacement, where'd you buy it from?
By the way 65c? Jesus even my Oneplus 2 didn't get that hot.
Click to expand...
Click to collapse
Well, that's what the sensors were showing, I don't have a good way to actually measure the temperature the hardware is reaching... Does the OP2 heats up? xD
Well, Brazil isn't really far from hell, common temperatures ranging from 35-43 during the day is...pretty close, I suppose.
Pfeffernuss said:
Ran Antutu, midway switched to Aida and:
Do note: phone still does not feel "hot". Warm, sure. Hot, not quite :good:
Click to expand...
Click to collapse
Thank you for the reference! It's strange though, my sensors reached about the same temperature, but the phone doesn't simply feel warm... As I said earlier, it really feels like a cheap-o ADSL modem on a hot day. You can hold your hand over the screen, for an example, but it becomes uncomfortable. The sides also gets really warm. I managed to figure where most of the heat came from though, it's just at the upper-left edge of the phone, close to the frontal-facing camera.
I've had 4 different Verizon g4's now and the all did the same thing , the two I have that are newest (one a couple weeks old) and they would get so hot around the modem and CPU i couldn't touch them and if even smell the chemicals in the plastic starting to release vapors (which that's not far from actual ignition) but the newest one isn't quite as bad. They all still worked through the heat without any noticeable damage, but I still have to pop the back off while using chrome plugged or not and hold it in front of a fan. This is the weirdest damn phone I've ever seen. .so picky and requires a lots of care but setup just right with a balance of what is continuously running especially how many and what kinda persistent services and it has become a real powerful toy lol
Sent from my VK700 using Tapatalk
The LG G4 is hot because of the Snapdragon 808 processor... See the link here I started:
http://forum.xda-developers.com/g4/help/lg-g4-thermal-compound-mod-t3255074#post64038221
37 and 39 ° on bms? seriously dude, thermal throttling starts at ~45°. Your phone is absolutely normal!
Don't look at tz sensors, they are components instant temperature.
dadrumgod said:
I've had 4 different Verizon g4's now and the all did the same thing , the two I have that are newest (one a couple weeks old) and they would get so hot around the modem and CPU i couldn't touch them and if even smell the chemicals in the plastic starting to release vapors (which that's not far from actual ignition) but the newest one isn't quite as bad. They all still worked through the heat without any noticeable damage, but I still have to pop the back off while using chrome plugged or not and hold it in front of a fan. This is the weirdest damn phone I've ever seen. .so picky and requires a lots of care but setup just right with a balance of what is continuously running especially how many and what kinda persistent services and it has become a real powerful toy lol
Sent from my VK700 using Tapatalk
Click to expand...
Click to collapse
Oh my god, I have been doing that with mine, that's hilarious! I mean, my Xperia Z1 would get really hot with some applications, but then I'd just take it under a tap and cool it off... xD
On the other hand, I really didn't know I'd need to care so much about heat under normal usage with a flagship phone. It's sad because it becomes really uncomfortable to hold.
Almighty1 said:
The LG G4 is hot because of the Snapdragon 808 processor... See the link here I started:
http://forum.xda-developers.com/g4/help/lg-g4-thermal-compound-mod-t3255074#post64038221
Click to expand...
Click to collapse
Uh...okay, I will sure check that, thanks! But the last thing I want to do is to open a damn phone just to apply thermal compound. I wouldn't mind doing that to a PC every week, but doing once for a phone is kinda sad...
oile said:
37 and 39 ° on bms? seriously dude, thermal throttling starts at ~45°. Your phone is absolutely normal!
Don't look at tz sensors, they are components instant temperature.
Click to expand...
Click to collapse
I kinda figured that out, the temperature they were showing is really over the head. The problem is, the upper part of the screen feels way hotter than 40C. I also did another run with the phone while heated and it showed throttling this time. Scores from Antutu and 3D mark were about 15~20% off.
michaelnishi said:
Oh my god, I have been doing that with mine, that's hilarious! I mean, my Xperia Z1 would get really hot with some applications, but then I'd just take it under a tap and cool it off... xD
On the other hand, I really didn't know I'd need to care so much about heat under normal usage with a flagship phone. It's sad because it becomes really uncomfortable to hold.
Uh...okay, I will sure check that, thanks! But the last thing I want to do is to open a damn phone just to apply thermal compound. I wouldn't mind doing that to a PC every week, but doing once for a phone is kinda sad...
I kinda figured that out, the temperature they were showing is really over the head. The problem is, the upper part of the screen feels way hotter than 40C. I also did another run with the phone while heated and it showed throttling this time. Scores from Antutu and 3D mark were about 15~20% off.
Click to expand...
Click to collapse
The Xperia Z1 runs on a Snapdragon 800, not a 808 so it's not the same. That's the reason the G4 used a 808 instead of a 810 as the 808 is throttled back. As for opening the phone, it's the easiest phone to open and you only need to do it once for the thermal interface material, G3 had heating problems too. A Smartphone is still a computer as it's a entire Unix workstation that fits in your pocket. The processor is 6 cores and is 64 bit and it's located on the top part of the screen.
Almighty1 said:
The Xperia Z1 runs on a Snapdragon 800, not a 808 so it's not the same. That's the reason the G4 used a 808 instead of a 810 as the 808 is throttled back. As for opening the phone, it's the easiest phone to open and you only need to do it once for the thermal interface material, G3 had heating problems too. A Smartphone is still a computer as it's a entire Unix workstation that fits in your pocket. The processor is 6 cores and is 64 bit and it's located on the top part of the screen.
Click to expand...
Click to collapse
Yeah, I know that quite well, believe me. It still makes me a bit sad about having a phone of this kind heating like a piece of plastic you find at those cheap-o stores. I would have actually bought a Xperia Z3+, but I heard so much about the thing overheating that made me really sad.
I also found one of those travel pack kits, with a battery and a external charger, is it a good idea to get one? You know, make usage of this lovely thing that swappable battery is.
Oddly enough, my own battery seems to be lasting pretty okay, fully charged yesterday, did some gaming, watched videos on YT, installed applications and such. Still going for over 24 hours right now and it has some juice left.
michaelnishi said:
Yeah, I know that quite well, believe me. It still makes me a bit sad about having a phone of this kind heating like a piece of plastic you find at those cheap-o stores. I would have actually bought a Xperia Z3+, but I heard so much about the thing overheating that made me really sad.
I also found one of those travel pack kits, with a battery and a external charger, is it a good idea to get one? You know, make usage of this lovely thing that swappable battery is.
Oddly enough, my own battery seems to be lasting pretty okay, fully charged yesterday, did some gaming, watched videos on YT, installed applications and such. Still going for over 24 hours right now and it has some juice left.
Click to expand...
Click to collapse
Remember that Sony has always been known as a quality electronics brand. LG = GoldStar... until they had flat screen tv's, GoldStar was always a low end brand. It's no different than Hyundai having their new Genesis or whatever car and trying to be in the luxury market. The brand will never be the same level as the luxury brands like Cadillac, Lincoln, Mercedes-Benz, BMW, Lexus, Infiniti if you know what I mean.
No idea about the travel pack kits as I have never seen one here, depends if it's a good value or not as the battery alone is about $US30 and you really only need the battery. If you really wanted another battery, just call the wireless carrier and claim that your battery have issues, they'll send you one for free without having to send the old one back. I have over 760 apps installed including system apps and I have to greenify everything, otherwise Google Play Store won't download and install and hangs, doesn't do it on my Motorola Xoom tablet with less memory but only happens on phones even Motorola's for some reason. I noticed if I freeze Lookout, my battery life is way longer.
Almighty1 said:
Remember that Sony has always been known as a quality electronics brand. LG = GoldStar... until they had flat screen tv's, GoldStar was always a low end brand. It's no different than Hyundai having their new Genesis or whatever car and trying to be in the luxury market. The brand will never be the same level as the luxury brands like Cadillac, Lincoln, Mercedes-Benz, BMW, Lexus, Infiniti if you know what I mean.
No idea about the travel pack kits as I have never seen one here, depends if it's a good value or not as the battery alone is about $US30 and you really only need the battery. If you really wanted another battery, just call the wireless carrier and claim that your battery have issues, they'll send you one for free without having to send the old one back. I have over 760 apps installed including system apps and I have to greenify everything, otherwise Google Play Store won't download and install and hangs, doesn't do it on my Motorola Xoom tablet with less memory but only happens on phones even Motorola's for some reason. I noticed if I freeze Lookout, my battery life is way longer.
Click to expand...
Click to collapse
True about the brand thing. But I really thought LG improved a lot. With their flat-screens and phones at least. I have been using LG monitors and TVs for a while now, only issue I had was with a LCD monitor, after 5 years of usage the thing won't stay on for over 5 minutes. The monitor would reboot and freeze at the LG logo.
The carrier thing isn't a choice where I live. The phone is "unlocked", so you can use with any carrier you want. My model is also the H818, dual-sim version. And yeah, it's going really cheap here, it's about 90 BRL, which is about 23 bucks. I found it in a good retail store and the product is certainly original from LG.
I also thought about getting the brand new Xperia Z5, but it's far too expensive here and it would have a smaller screen. While the Z5 premium isn't even an option because it hasn't reached the stores yet. So, the best option I had was the LG G4. Best price, swappable battery, larger screen, great camera and the best of those was the expandable storage. I own a toshiba class 10 64 gig SD, didn't want it to go to waste with a Samsung phone. ^^
michaelnishi said:
True about the brand thing. But I really thought LG improved a lot. With their flat-screens and phones at least. I have been using LG monitors and TVs for a while now, only issue I had was with a LCD monitor, after 5 years of usage the thing won't stay on for over 5 minutes. The monitor would reboot and freeze at the LG logo.
The carrier thing isn't a choice where I live. The phone is "unlocked", so you can use with any carrier you want. My model is also the H818, dual-sim version. And yeah, it's going really cheap here, it's about 90 BRL, which is about 23 bucks. I found it in a good retail store and the product is certainly original from LG.
I also thought about getting the brand new Xperia Z5, but it's far too expensive here and it would have a smaller screen. While the Z5 premium isn't even an option because it hasn't reached the stores yet. So, the best option I had was the LG G4. Best price, swappable battery, larger screen, great camera and the best of those was the expandable storage. I own a toshiba class 10 64 gig SD, didn't want it to go to waste with a Samsung phone. ^^
Click to expand...
Click to collapse
It really depends on how many of the components are made by LG. Samsung makes more of the things inside their devices. As for LG, their OLED Flat Panel displays are full of problems if you look at avsforums which results into replacing panels and even sending full refunds. Panasonic sources the LG panels and then uses their own electronics and the thing is better but the Panasonic is atleast $US10k while the LG is $US5k.
I had never seen a LG monitor until recently as I'm still on a Silicon Graphics Inc 1600SW made by Mitsubishi Industrial in Japan, this is the same display used by the big CEOs on their desks including Bill Gates.
You can use the Verizon Wireless LG G4 with any carrier you want too, it's just the data part might not be 4G LTE speeds as those are all carrier dependent. Wow, 23 bucks is cheap for a phone since wouldn't it actually be cheaper buying another G4 than the so called battery kit you mentioned? The LG G4 supposedly has better reception than even Motorola phones from what I heard so not all is bad, basically they don't put 100% into a product so they can have room to introduce better models at a later date. LOL. The LG G4 is the only phone currently that has both a replaceable battery and MicroSD slot. To me, the second one is a requirement while the first one is good to have.
Almighty1 said:
It really depends on how many of the components are made by LG. Samsung makes more of the things inside their devices. As for LG, their OLED Flat Panel displays are full of problems if you look at avsforums which results into replacing panels and even sending full refunds. Panasonic sources the LG panels and then uses their own electronics and the thing is better but the Panasonic is atleast $US10k while the LG is $US5k.
I had never seen a LG monitor until recently as I'm still on a Silicon Graphics Inc 1600SW made by Mitsubishi Industrial in Japan, this is the same display used by the big CEOs on their desks including Bill Gates.
You can use the Verizon Wireless LG G4 with any carrier you want too, it's just the data part might not be 4G LTE speeds as those are all carrier dependent. Wow, 23 bucks is cheap for a phone since wouldn't it actually be cheaper buying another G4 than the so called battery kit you mentioned? The LG G4 supposedly has better reception than even Motorola phones from what I heard so not all is bad, basically they don't put 100% into a product so they can have room to introduce better models at a later date. LOL. The LG G4 is the only phone currently that has both a replaceable battery and MicroSD slot. To me, the second one is a requirement while the first one is good to have.
Click to expand...
Click to collapse
Oh, sorry my english failed me there, second language and stuff, you know? I meant the charger kit is 23 bucks in here. 90 BRL converted to USD is about 23 bucks. The phone itself costed me almost 500 USD, got the one with black leather back, damn it looks great.
There's a lot of stuff about components I didn't know. Decent monitors here such as gaming ones are really expensive. LG ones manages good image quality and are also quite cheap. There is cheaper stuff in here, but the image quality on them is really bad.
Swappable battery isn't a must for me either, it's just nice to have. Now the MicroSD slot is a must, I like carrying a lot of stuff on the phone. Music, videos, games and such. Just 32 gigs wouldn't be enough for me xD
At $US23, it's still a bargain for the charger kit. I have the black leather back as well except the thread on mines is black as I basically used shoe cream on it to condition the leather after hearing some people's leather worn off.
About all monitors are cheap compared to my SGI which was $US2,500. I actually never use the internal SD because if something happens to the phone and it won't boot, you're in trouble as I have my Titanium backups on a 200GB MicroSD card which was actually cloned from my Motorola Droid RAZR Maxx HD.
Almighty1 said:
At $US23, it's still a bargain for the charger kit. I have the black leather back as well except the thread on mines is black as I basically used shoe cream on it to condition the leather after hearing some people's leather worn off.
About all monitors are cheap compared to my SGI which was $US2,500. I actually never use the internal SD because if something happens to the phone and it won't boot, you're in trouble as I have my Titanium backups on a 200GB MicroSD card which was actually cloned from my Motorola Droid RAZR Maxx HD.
Click to expand...
Click to collapse
It is really cheap indeed, just ordered one. The kit's model is BCK-4800, it comes with an extra battery, a battery case and the external charger. Really great deal!
Did not know about that thing on the leather back... I do have a simple TPU case here, I haven't been using it because the phone's temperatures. It's really odd though, today isn't so hot in here (About 25-30C most) the phone is warm but it charged really quickly, it jumped from 5% to 85% in less than an hour. xD
Either way, that sounds like a really expensive monitor...Woah...
I'm using a battery pack as I still didn't get the free promotion of the battery, battery case and leather back yet as they ran out of stock. Last email from LG on October 20, 2015 was another 4-6 weeks which has came and gone, they haven't responded to my emails either. I'm using a Ringke Fusion case except it always pulls the entire leather back off when I try to take off the case.
http://www.amazon.com/Compatible-LEATHER-Back-Absorption-Protection-Customizable/dp/B00V51QOXA
When I got my monitor, it was in 2000 so it's still alive and kicking... LOL. It's basically the 17.3" version of the Apple 22" display. SGI is the big workstation manufacturer that has 500" or larger screens.
https://en.wikipedia.org/wiki/SGI_1600SW
Almighty1 said:
I'm using a battery pack as I still didn't get the free promotion of the battery, battery case and leather back yet as they ran out of stock. Last email from LG on October 20, 2015 was another 4-6 weeks which has came and gone, they haven't responded to my emails either. I'm using a Ringke Fusion case except it always pulls the entire leather back off when I try to take off the case.
http://www.amazon.com/Compatible-LEATHER-Back-Absorption-Protection-Customizable/dp/B00V51QOXA
When I got my monitor, it was in 2000 so it's still alive and kicking... LOL. It's basically the 17.3" version of the Apple 22" display. SGI is the big workstation manufacturer that has 500" or larger screens.
https://en.wikipedia.org/wiki/SGI_1600SW
Click to expand...
Click to collapse
I did a quick search on it and saw that! I am actually using a old LG CRT monitor because my old 23 inch LCD one broke.
That case looks really good, but it's not shipped to Brazil... Oh well, nothing new, really.
Hi all,
My wife's 5x appears to be very dead. I haven't found any similar issues on this phone or any other so I thought I would share and also see if anyone has advice.
So her battery was low and so my 4 year old says "Let me help you with that Mom, I will go plug it in." A few moments later he says "Hey mom, it isn't working" as he shoves the end of the baby monitor wall wart in and out of the headphone jack. The wife plugs the phone into the correct charger but it doesn't seem to work. She used her phone for a little while longer before the battery died.
Best I can tell putting the 7.5 volts across the headphone jack blew up a circuit in the phone that also charges the battery. I messed with it awhile and the charging screen did come on one time briefly but I haven't seen it since. The USB port had been perfectly fine before.
I took the phone apart to take a look but it didn't tell me anything I didn't already know. It looks like a new motherboard would be needed to fix it and would probably cost more than the phone is worth.
So in summary the only thing that should be plugged into the headphone jack are headphones.
Any advice? Know a magic fix? We are both perfectly happy with our 5x's and had no plans to upgrade. She needs a Fi compatible phone so options are limited. The Moto x4 doesn't seem like much of an upgrade, new pixels are way too much phone and too much money, the old pixels are more than I want to spend for a used phone. I am thinking I will just pick up a used 5x from swappa as they are going cheap and I won't be out much, just worried about getting the BLOD, we have avoided that so far but it scares me more when getting a phone of unknown history. Would I be crazy to buy a used 5x knowing about the potential of the BLOD?
Thanks
shaunskie said:
Would I be crazy to buy a used 5x knowing about the potential of the BLOD?
Click to expand...
Click to collapse
Not necessarily, LG has been fixing out-of-warranty 5X phones with the bootloop problem. I don't know if they'd extend that courtesy to the 2nd owner of a phone but you can probably find out more by searching the 5X forums for recent posts with "LG repair warranty" in the text.
Thanks,
It looks to be a little bit of a crap shoot if a secondhand warranty will be honored but I think might just do it anyway. At least it is a pretty small investment if it would fail and not be covered under warranty.
I think I will give it a shot on the current phone for the extended warranty also but expect to be quickly shoot down. It was bought through project Fi two years ago but what I've read seems to indicate only the BLOD is being covered by the extended warranty.
I wish there were more options for project fi phones on the budget end. Should I be considering the X4 or second hand 1st Gen pixel?
My HTC 10 is going to be 2 years old. And probably see a degradation soon on battery performance. Since Apple has nation-wide local stores to offer $29 battery replacement to iPhones, I am wondering is there any certified battery replacement for HTC? I know BestBuy is doing battery replacement for Samsung phones, but you know HTC is NOT so mainstream as Samsung, is there any place I can have HTC 10 battery replaced? I am pretty sure HTC official support is going to be expensive on this.... wouldn't consider them anyway.
The DIY video kinda scares me away, as I tried to open a few phones several years ago, and there were dirts leaked into screen after I assembled the phone back. So if DIY is my last resort, I wouldn't bother replacing the battery... May consider buying a iPhone or Samsung due to their minimum maintenance efforts.
35€ for a new battery including replacemet services
http://www.fixservis.sk/pokazen-bat-ria-p40698
vrsko said:
http://www.fixservis.sk/pokazen-bat-ria-p40698
Click to expand...
Click to collapse
Com'on.. Not in that country.. If shipping to Slovakia is the only way, I'd risk dissembling the phone by myself.
ctzw said:
My HTC 10 is going to be 2 years old. And probably see a degradation soon on battery performance. Since Apple has nation-wide local stores to offer $29 battery replacement to iPhones, I am wondering is there any certified battery replacement for HTC? I know BestBuy is doing battery replacement for Samsung phones, but you know HTC is NOT so mainstream as Samsung, is there any place I can have HTC 10 battery replaced? I am pretty sure HTC official support is going to be expensive on this.... wouldn't consider them anyway.
The DIY video kinda scares me away, as I tried to open a few phones several years ago, and there were dirts leaked into screen after I assembled the phone back. So if DIY is my last resort, I wouldn't bother replacing the battery... May consider buying a iPhone or Samsung due to their minimum maintenance efforts.
Click to expand...
Click to collapse
Not sure where you are located, but you might give these guys a try:
https://www.ubreakifix.com/htc-repair
I realize the HTC 10 isn't listed but it might be worth contacting them and see if they can help you with your issue.
ctzw said:
Com'on.. Not in that country.. If shipping to Slovakia is the only way, I'd risk dissembling the phone by myself.
Click to expand...
Click to collapse
tried to help... this is what you get when you ask for a repair service and exlude any information about your location... ?
OP:
- Contact the closest HTC you find, maybe you have to ship it to another country, but that is the easiest it will get.
- DO NOT DO IT YOURSELF. I bought an OEM battery for my M7 from a "trusted seller". It's a big shop, and really, people trust them. Took me 2 days to disassemble the phone (obviously with breaks and work and all), it's extremely tedious and cumbersome. Then I put it together, but no charge. Turns out, the new battery was defective out of the box. Also, the repair process is so destructive, I do not think you can take the phone apart 2-3 times. Maybe once, twice if you are extremely careful. But it is almost beyond human - to be so careful and cautious. You have to look out for so many small cables, ribbons. Point is, if HTC messes up, they fix it / give you a new phone, whatever. If you mess up, bye-bye phone.
I called a local UBreakIFix shop, and they said that, since the screen must be removed and it's so thin, to replace the battery on the HTC 10, they would have to charge me for replacing the screen plus battery. About $130 for parts and labor.
saga-more said:
I called a local UBreakIFix shop, and they said that, since the screen must be removed and it's so thin, to replace the battery on the HTC 10, they would have to charge me for replacing the screen plus battery. About $130 for parts and labor.
Click to expand...
Click to collapse
Because they're a business, they're all about doing jobs quickly. The longer it takes, the more it costs them to complete it. As such, they can't be bothered with educating themselves on how to do the HTC 10 properly. There is a technique and it takes time. If it wasn't possible, nobody would be doing it with any reported success. The main thing is heating up the phone enough to soften the adhesive, and being gentle enough not to disturb the ribbon cable for the screen.
HTC really boned it on the HTC 10. If there was no battery issue, it would be a strong competitor for the Google Pixel. But they cut corners to keep manufacturing costs low, and sacrificed serviceablility. Coupling that with the common battery problem, they're left with frustrated customers who are destined to abandon the brand. It's a real shame because without the battery issue, the HTC 10 is pretty much about as good as the Google Pixel. I showed mine to a friend with the Pixel and we did a compare. Aside from the Pixel being a little lighter, the screen intensity of the HTC 10 was better and the case feels more solid.
yea HTC won't work on the 10 anymore.. EOL (in USA anyway) and UK won't take it
anyone willing to change my battery?
I will pay, PM me please.
on eBay, you can find brand new HTC 10 for about $110 and brand new HTC U11 for about $170. If your cost of repair is around $100, it would make more sense to purchase a brand new HTC 10 or a brand new HTC U11.
tiga2001 said:
on eBay, you can find brand new HTC 10 for about $110 and brand new HTC U11 for about $170. If your cost of repair is around $100, it would make more sense to purchase a brand new HTC 10 or a brand new HTC U11.
Click to expand...
Click to collapse
I agree. I do..
htc u11 doesnt work fully on verizon AFAIK, and I love the 10 anyway.
but for the new htc 10, my issue is that with ebay, some wont take returns, and lithium batteries degrade. new doesn't mean you're getting a new battery.
un-used, yes if new.
but if no returns, and it only has like 70% capacity, I'm where I am now and then stuck with 2 10s
but yes the ONLY place i could find was:
www.ubreakifix.com
they quoted me at $99 for the battery repair, and it includes:
new battery
new screen (if they break it)
new whatever if they break it
(meaning they cover everything for the $99)
and 90 day warranty
soooo. idk
theres literally like no phone im interested in.
and here in the us, at least what ive found is no one will touch it because they can't guarntee the screen not breaking, and once that happens, as you said, gets higher than phone is "worth"
andybones said:
I agree. I do..
htc u11 doesnt work fully on verizon AFAIK, and I love the 10 anyway.
but for the new htc 10, my issue is that with ebay, some wont take returns, and lithium batteries degrade. new doesn't mean you're getting a new battery.
un-used, yes if new.
but if no returns, and it only has like 70% capacity, I'm where I am now and then stuck with 2 10s
but yes the ONLY place i could find was:
www.ubreakifix.com
they quoted me at $99 for the battery repair, and it includes:
new battery
new screen (if they break it)
new whatever if they break it
(meaning they cover everything for the $99)
and 90 day warranty
soooo. idk
theres literally like no phone im interested in.
and here in the us, at least what ive found is no one will touch it because they can't guarntee the screen not breaking, and once that happens, as you said, gets higher than phone is "worth"
Click to expand...
Click to collapse
I see that makes some sense. I am not familiar with the battery degradation of phones that haven't been used in 3 years, but it does sound like a brand new battery would be a good way to go to get maximum battery life. I also wish there was an easy way to replace the battery so that I wouldn't have to go through the route of looking for a new phone. I'm currently planning to get a new HTC U11 from eBay, but was certainly considering another HTC 10 before I discovered how cheap the U11 is from certain sellers.
tiga2001 said:
I see that makes some sense. I am not familiar with the battery degradation of phones that haven't been used in 3 years, but it does sound like a brand new battery would be a good way to go to get maximum battery life. I also wish there was an easy way to replace the battery so that I wouldn't have to go through the route of looking for a new phone. I'm currently planning to get a new HTC U11 from eBay, but was certainly considering another HTC 10 before I discovered how cheap the U11 is from certain sellers.
Click to expand...
Click to collapse
Another thing I forgot about was root, duh lol.
Unlocked model can unlock bootloader, but I'm not sure about s-off app is still available for it. I'd pay the $25 no problem, but would need to refresh myself ifits an option.
I know there's Java cards and xtc clip but that's another investment really, would maybe need to fund someone that already has one
I am making this post so it is more broadly seen by people who have a specific hardware issue.
This solution is for issues specifically with the board being fried or more likely broken solder connection. I found this solution while browsing Chinese Custom Rom threads and apparently it works.
Absolutely it's better to pay a professional reball the broken solder connection.
There is a do it yourself/cheap method that definitely does not involve using an Oven.
I included photos at the bottom of the link and rather than create a redundant post, for something that I have already made : Go here for the Jerry Rig Suggestion
https://forum.xda-developers.com/showpost.php?p=79303956&postcount=72
Good Luck
Make sure you followed all of the unbricking steps here https://forum.xda-developers.com/le-pro3/how-to/unbrick-leeco-phones-leeco-variants-t3847220 before even considering this method..
There are 3 unbricking methods mentioned
Qfil with Flash 2.0 or 1.9 ( Try both)
QPST ( Instructions in first comment of unbricking thread)
Flashbat.all method ( Instructions on Unbrick OP, and in first couple of comments)
Hi
What do you think, can I repair this problem? :
My phone is dead. It is not able to turn on, it just squezing sometimes, if I push the turn on button. The screen is full black since the shut down. No logo no any fastboot screen, nothing. The led light was pale green before the qfil.
drdagi said:
Hi
What do you think, can I repair this problem? :
My phone is dead. It is not able to turn on, it just squezing sometimes, if I push the turn on button. The screen is full black since the shut down. No logo no any fastboot screen, nothing. The led light was pale green before the qfil.
Click to expand...
Click to collapse
I wouldn't bother trying this possible solution unless you are 100% sure that you have broken solder connections. Just because your phone doesnt turn on doesn't mean its the chips. It much more likely that your issue is just the battery.
Also just so you know when the board is fried the phone will still turn on, and will boot to fastboot but not recovery, qfil works but does nothing and if you boot to fastboot and leave it on the fastboot screen the screen will turn to static. At least this is what happens with the majority of chip death issues. However there was one case that I know of on a friends X722 which could not go to fastboot, and that issue ended up being a fried GPU, which this possible fix may resolve.
If you are only getting a black screen leave the phone plugged in overnight ( preferably with a different cable) , After knowing that the phone was charged for long enough what happened? Did the phone get warm at all? Does the phone vibrate?
If the phone does vibrate, try using the QPST method, it's the 2nd post on the Unbricking thread mentioned above in the OP.
Another possible cause of your issue is static, they only way to test and possibly resolved is to unplug the battery from the board and plug back in again. Should you attempt trying this, only use a heat gun to melt the glue holding the screen on...there is alot and a hair dryer will not work, without damaging your LCD.
If I had your issue, I would order a battery and LCD, and swap the battery, there is a good chance it will work. If not you can move on to more drastic solutions such as the one mentioned in the OP. Worse case scenario, you will be out the cost of the battery which is about $7 and LCD which is about $15
Good Luck and make sure you followed all of the steps here https://forum.xda-developers.com/le-pro3/how-to/unbrick-leeco-phones-leeco-variants-t3847220
There are 3 unbricking methods mentioned
Qfil with Flash 2.0 or 1.9 ( Try both)
QPST ( Instructions in first comment of unbricking thread)
Flashbat.all method ( Instructions on Unbrick OP, and in first couple of comments)
I believe I read this thread before, but didn't read it well
This thing here I believe is very important, so much to put it in special color
>>Also just so you know when the board is fried the phone will still turn on, and will boot to fastboot but not recovery, qfil works but does nothing and if you boot to fastboot and leave it on the fastboot screen the screen will turn to static.
I guess it's certain now that I have some harware issue, most probably if GPU is separated from the CPU.
tsongming said:
the board being fried or more likely broken solder connection. I found this solution while browsing Chinese Custom Rom threads and apparently it works.
Click to expand...
Click to collapse
I don't know if it's just me who is unlucky but I have lost yet another USB board. This time the one you sent me burnt up as I connected it to my PC. I don't think it's a cable issue because I was using a high quality USB cable from BASEUS. How could it be that I'm not seeing more complaints like mine?
This time I think it could have been caused by dirt in the port because I'd just returned from my rural area and there I did a lot of work involving dirt. Also, there was a slight shower that got me on my way back and I keep the phone in the pocket with the USB port exposed and looking up. My patience with this phone has just about run out now. This is the worst investment I've ever made on a phone :crying:
Sent from my LeEco Le Pro3 using XDA Labs
twistyplain said:
I don't know if it's just me who is unlucky but I have lost yet another USB board. This time the one you sent me burnt up as I connected it to my PC. I don't think it's a cable issue because I was using a high quality USB cable from BASEUS. How could it be that I'm not seeing more complaints like mine?
This time I think it could have been caused by dirt in the port because I'd just returned from my rural area and there I did a lot of work involving dirt. Also, there was a slight shower that got me on my way back and I keep the phone in the pocket with the USB port exposed and looking up. My patience with this phone has just about run out now. This is the worst investment I've ever made on a phone :crying:
Sent from my LeEco Le Pro3 using XDA Labs
Click to expand...
Click to collapse
Wow, sorry to hear that. I think that those LeEco phones are hit or miss. But it really doesn't seem that they were made to last more that a couple of years. I have fried the usb card myself, when I bought very first leeco, its too easy to fry those cards, and in retrospect the Leeco charge is too powerful. The remaining Leeco that I have left charges much better ( stays cooler) when using my Xiaomi Charger.
I agree that you have had some really bad luck. I would not put any more money into it. you are better off buying a cheap Xiaomi...even a used one. You can find some good deals on Amazon and Swappa. Amazon also has refurbished Samsung phones, and they are highly reliable.
You can get a Galaxy 7 for $139 https://www.amazon.com/Samsung-Gala...s=wireless&ie=UTF8&qid=1573693012&sr=1-4&th=1 and they are really good phones.
Here is a renewed One Plus 6T for $267 https://www.amazon.com/OnePlus-A601...ked+cell+phones+renewed&qid=1573693220&sr=8-4
LG V30 for $177 https://www.amazon.com/LG-Camera-Si...ed+cell+phones+renewed&qid=1573693365&sr=8-21
I bought my daughter an A3 and honestly I can't recommend it enough. For a tight budget I personally feel that this is one of the best deals out there for ony $158 ( $50 less than what I paid 2 months ago) https://www.amazon.com/Xiaomi-A3-64...=sr_1_3?keywords=Xiaomi&qid=1573693435&sr=8-3
It has an Amoled Screen and comes with Android One with zero bloatware. You basically get a custom rom experience with a stock phone. To make matters better Android 10 will be released for the A3 in January. The camera, is light years better than the Le Pro 3 and the processor is honestly fast enough, for most of us. No doubt, its more expensive than just getting another card. But saving yourself from the hassles of these constant issues will make it worthwhile. The only drawback is the screen is 720 instead of 1080. But I swear, if you place in side by side with my Mi8, most people would never guess, that the resolution is a little less. Because it's still an amoled screen.
Best wishes, unfortunately I don't have any more working cards or I would send it to you.
I've learned that quick charge is dangerous. I'm using now an usb meter that doesn't let an output beyond 1.4amps to charge my phone now, it charges pretty quickly in fact and my phone doesn't get hot now (even that I live in a hot area)
tylerciggy said:
I've learned that quick charge is dangerous. I'm using now an usb meter that doesn't let an output beyond 1.4amps to charge my phone now, it charges pretty quickly in fact and my phone doesn't get hot now (even that I live in a hot area)
Click to expand...
Click to collapse
Yeah. The current pushed by the stock leeco charger is either too high (doubtful) or the charging system of the pro 3 isn't designed to handle quick charge 3 very well (most likely). I have used my stock leeco charger to charge my brother's Nokia 8 (Q.C. 3) and it gets just a little warm even with a case on. Also, the leeco charger is Quick Charge 3 certified so they must have made it according to Qualcomm standards.
I think it's the quality of the parts on the phone itself that are substandard. Since this USB board was sent to me by @tsongming and he had used it quite a while, I believe it could have been perfectly fine. My suspicion is that something else could be wrong with my phone like the USB flex cable. The kind of burning I saw must have been caused by power from the battery because the USB 2.0 port I was connecting to on my PC can only provide 2.5 amps maximum. This is not enough in my opinion to completely melt the usb-c receptacle on the phone. (It's very badly burnt). I will just have to charge the battery externally until I figure out whether it's worth investing any more money into this phone.
Sent from my LeEco Le Pro3 using XDA Labs
twistyplain said:
Yeah. The current pushed by the stock leeco charger is either too high (doubtful) or the charging system of the pro 3 isn't designed to handle quick charge 3 very well (most likely). I have used my stock leeco charger to charge my brother's Nokia 8 (Q.C. 3) and it gets just a little warm even with a case on. Also, the leeco charger is Quick Charge 3 certified so they must have made it according to Qualcomm standards.
I think it's the quality of the parts on the phone itself that are substandard. Since this USB board was sent to me by @tsongming and he had used it quite a while, I believe it could have been perfectly fine. My suspicion is that something else could be wrong with my phone like the USB flex cable. The kind of burning I saw must have been caused by power from the battery because the USB 2.0 port I was connecting to on my PC can only provide 2.5 amps maximum. This is not enough in my opinion to completely melt the usb-c receptacle on the phone. (It's very badly burnt). I will just have to charge the battery externally until I figure out whether it's worth investing any more money into this phone.
Sent from my LeEco Le Pro3 using XDA Labs
Click to expand...
Click to collapse
My X722 died because I just plugged in the cable to charge. Although I have to admit that the phone socket was not in optimal conditions because I used a crappy cable, so the last one I was using was charging fine but it had to enter in an specific position in order to quick charge to function. It's probably the charger IC that is damaged, but I haven't had the money to send it to repair.
As far as I know, the motherboards just provide 0.5amp unless you are using an special port that can provide more power.
In my opinion 2.5amp at 5v is not that good either, because it's pushing the limit of most phones at 5v.
I am guessing that buying the original $30 USB board from AliExpress won't buy me much time because they have all been used before. Almost every spare part of this phone is not brand new (except for batteries and screens, I guess).
I think it's time to cut my losses. My pro 3 not only needs a new USB board but also a battery and another high quality USB cable. I might buy all of that for $60 only to have the USB port burn again. It doesn't make any sense to keep pouring money into this phone.
Sent from my LeEco Le Pro3 using XDA Labs
What ? $30 usd ? I've seen it in $2.5 for 2 boards, well, not original of course.
You just need to check that it has the extra IC, because there are ones that doesn't has it... although I don't remember what was for that IC, but you can easy see it that some boards just are missing a chip.
As for the cable, I'm using some EFFE cables (EFFE is the brand) and they are working wonderfully, I bought 3 for $7 usd, they plug in fine and stay in too, they were recommended to me by a friend and I'm very happy with them. They even stop giving charge to my dead phone because they detect somehow that there is a short, well, at least that is what my usb meter tells me, although I don't know how do they manage to do that, I don't really think they have an IC in them.
twistyplain said:
I am guessing that buying the original $30 USB board from AliExpress won't buy me much time because they have all been used before. Almost every spare part of this phone is not brand new (except for batteries and screens, I guess).
I think it's time to cut my losses. My pro 3 not only needs a new USB board but also a battery and another high quality USB cable. I might buy all of that for $60 only to have the USB port burn again. It doesn't make any sense to keep pouring money into this phone.
Click to expand...
Click to collapse
For the record the board that I sent you came from a brand new, LePro 3 not opened bought in the spring 2018. However, I assume that it was made after Leecos public fall. I would guess that it was assembled with C grade parts, because my remaining, working LePro 3 is one of our first Leecos bought in 2016. It's also interesting to note that our 2 remaining X522s are both functioning just fine.
As you said could be the flex cables or just a shoddy soldering job that eventually shortened out the board.
Have you tested the board to be sure that it's not the port itself that is bad?
Another interesting thing to note is that Qualcomm removed Leeco from it's list of approved quick charge device list.
One last reason on why I feel that the charger itself may be part of the problem is that I have a 12 watt portable charger and the Leecos do not get hot at all when using it.
I threw my Leeco charging bricks in the trash after my daughter plugged in my Mi8 for me while I was cooking dinner. Not knowing that I had a preference, she used the Leeco charger.
Later when I checked the phone to see if it was finished charging, I found it was extremely hot, and this phone is rated for QC 4.0. So rather than taking any chances into the trash it went.
tsongming said:
For the record the board that I sent you came from a brand new, LePro 3 not opened bought in the spring 2018. However, I assume that it was made after Leecos public fall. I would guess that it was assembled with C grade parts, because my remaining, working LePro 3 is one of our first Leecos bought in 2016. It's also interesting to note that our 2 remaining X522s are both functioning just fine.
As you said could be the flex cables or just a shoddy soldering job that eventually shortened out the board.
Have you tested the board to be sure that it's not the port itself that is bad?
Another interesting thing to note is that Qualcomm removed Leeco from it's list of approved quick charge device list.
One last reason on why I feel that the charger itself may be part of the problem is that I have a 12 watt portable charger and the Leecos do not get hot at all when using it.
I threw my Leeco charging bricks in the trash after my daughter plugged in my Mi8 for me while I was cooking dinner. Not knowing that I had a preference, she used the Leeco charger.
Later when I checked the phone to see if it was finished charging, I found it was extremely hot, and this phone is rated for QC 4.0. So rather than taking any chances into the trash it went.
Click to expand...
Click to collapse
Wow!! Leeco really must have used grade c parts. I haven't mistreated that board even once since you sent it. That means it only lasted three months! It is just unbelievably negligent for leeco to use these parts. They must have been from the reject pile.
I don't need to test the board because the USB-C receptacle on the phone is completely melted. Connecting a charging cable seems to cause it to heat up fast and start smoking. It might have been a short on the connector that caused it to burn up. I think the quality of the protruding part with the pin connectors is just poor and repeated use loosens the pins which eventually touch.
I'm done with leeco for good now. I was thinking about fixing the phone to sell but that now seems like a lost cause. I'll keep it until it's dead and then take a hammer to it. Even selling it for spare parts might be a loss for me so I'm stuck with it.
Sent from my LeEco Le Pro3 using XDA Labs
twistyplain said:
Wow!! Leeco really must have used grade c parts. I haven't mistreated that board even once since you sent it. That means it only lasted three months! It is just unbelievably negligent for leeco to use these parts. They must have been from the reject pile.
I don't need to test the board because the USB-C receptacle on the phone is completely melted. Connecting a charging cable seems to cause it to heat up fast and start smoking. It might have been a short on the connector that caused it to burn up. I think the quality of the protruding part with the pin connectors is just poor and repeated use loosens the pins which eventually touch.
I'm done with leeco for good now. I was thinking about fixing the phone to sell but that now seems like a lost cause. I'll keep it until it's dead and then take a hammer to it. Even selling it for spare parts might be a loss for me so I'm stuck with it.
Click to expand...
Click to collapse
I am sure that they used low quality parts on those last batches of phone, I heard via a friend who lives in Shenzhen that they hired a 3rd party to assemble the final phones... The ones that came with 32gb drives, no nfc or quick charge etc. It sucks because they had so much potential.
Whatever you end up getting. Please do stay in touch, I have enjoyed our conversations and I wish you the best.
tsongming said:
I am sure that they used low quality parts on those last batches of phone, I heard via a friend who lives in Shenzhen that they hired a 3rd party to assemble the final phones... The ones that came with 32gb drives, no nfc or quick charge etc. It sucks because they had so much potential.
Whatever you end up getting. Please do stay in touch, I have enjoyed our conversations and I wish you the best.
Click to expand...
Click to collapse
This puppy is not out yet. I figure it's got one last hurrah before I throw in the towel. I've been shopping around for a phone with similar performance for around the same price but from the current generation of phones and I've not come across anything else. At least not in the same price range. Performance is very important to me and I just can't take a downgrade. I guess I'm stuck with it for a while.
Sent from my LeEco Le Pro3 using XDA Labs
twistyplain said:
This puppy is not out yet. I figure it's got one last hurrah before I throw in the towel. I've been shopping around for a phone with similar performance for around the same price but from the current generation of phones and I've not come across anything else. At least not in the same price range. Performance is very important to me and I just can't take a downgrade. I guess I'm stuck with it for a while.
Sent from my LeEco Le Pro3 using XDA Labs
Click to expand...
Click to collapse
Its good that it's still working for now. Unfortunately you probably only have 4 to 6 weeks before it stops working completely. I was thinking about you situation and made the list below of additional options/good deals.
The Snapdragon 665 has similar performance to the Snapdragon 821 and the Note 8, (the version with the SD665) can be had for under $200 : https://www.amazon.com/Xiaomi-Displ...keywords=Snapdragon+665&qid=1573874157&sr=8-2
If you can spend a just a little more the Mi8's price has dropped to $250, https://www.amazon.com/Xiaomi-6-64G...ef=sr_1_1?keywords=Mi+8&qid=1573874317&sr=8-1 and I can't recommend it enough. It's definitely my most favorite phone that I have owned and I know that you care about the camera a lot. I can promise that the Mi 8 has one hell of a great camera, and stock camera, is absolutely fantastic, especially with video. In fact, I prefer it for video over the latest Pixel 7.XXX Camera and yes it does Astrophotography.
As I mentioned before the A3, is much better than you would ever expect and you can find them for $150.
If budget is a primary concern: It is definitely worth looking at among the best new phones for the money. Plus the bootloader is easily unlocked with no waiting period. if you want a new phone for around $150. I honestly can't think of a better phone, and as I mentioned my daughter has this phone, so I have actually used it, and I am telling you, it's damn good.
Another option is buying a used 128GB Pixel refurbished $120
I have seen them for as low as $75, or you could buy a One Plus 3T
Edit: I just now found this phone and although it has a mediatek processor, its brand new , has Android 9.0 , 4gb ram, 64 gb hd space and it's just a little over $100 UMIDIGI Power This may be the one, if you can deal with processor but there's a lot of people who say that this phone is great, I dont know if you can use roms, but I have heard that it doesn't have bloatware, so it be a smart buy. Edit : The $118 price is a lightning deal, and the price will go backup to $139 by the time you read this. In that case, I would personally avoid it, but I am am a little biased against mediatek for reasons. Mostly heat and poor battery life.
tsongming said:
Its good that it's still working for now. Unfortunately you probably only have 4 to 6 weeks before it stops working completely. I was thinking about you situation and made the list below of additional options/good deals.
The Snapdragon 665 has similar performance to the Snapdragon 821 and the Note 8, (the version with the SD665) can be had for under $200 : https://www.amazon.com/Xiaomi-Displ...keywords=Snapdragon+665&qid=1573874157&sr=8-2
If you can spend a just a little more the Mi8's price has dropped to $250, https://www.amazon.com/Xiaomi-6-64G...ef=sr_1_1?keywords=Mi+8&qid=1573874317&sr=8-1 and I can't recommend it enough. It's definitely my most favorite phone that I have owned and I know that you care about the camera a lot. I can promise that the Mi 8 has one hell of a great camera, and stock camera, is absolutely fantastic, especially with video. In fact, I prefer it for video over the latest Pixel 7.XXX Camera and yes it does Astrophotography.
As I mentioned before the A3, is much better than you would ever expect and you can find them for $150.
If budget is a primary concern: It is definitely worth looking at among the best new phones for the money. Plus the bootloader is easily unlocked with no waiting period. if you want a new phone for around $150. I honestly can't think of a better phone, and as I mentioned my daughter has this phone, so I have actually used it, and I am telling you, it's damn good.
Another option is buying a used 128GB Pixel refurbished $120
I have seen them for as low as $75, or you could buy a One Plus 3T
Edit: I just now found this phone and although it has a mediatek processor, its brand new , has Android 9.0 , 4gb ram, 64 gb hd space and it's just a little over $100 UMIDIGI Power This may be the one, if you can deal with processor but there's a lot of people who say that this phone is great, I dont know if you can use roms, but I have heard that it doesn't have bloatware, so it be a smart buy. Edit : The $118 price is a lightning deal, and the price will go backup to $139 by the time you read this. In that case, I would personally avoid it, but I am am a little biased against mediatek for reasons. Mostly heat and poor battery life.
Click to expand...
Click to collapse
Tony, you're among very few people I know who are invaluable to communities like these. I'm always impressed by how easily you go out of your way to help community members at XDA. Thank you so much for always being helpful even when you don't have to be. If I had the means I would buy you several cases of beer (or whatever non-alcoholic beverage you like) just to say how much I appreciate you. But for now I can just say THANK YOU!! From the bottom of my heart.
Out of all the options you gave me just now and a few days ago, the brand new Mi A3 is the best option by far. Refurbished is a no-go and yes, I hate Mediatek too. Been there, done that, but once you've got a taste of Qualcomm, there's simply no going back. I'm inclined to go for the A3 because of its AMOLED screen, UFS 2.1, decent camera, and, most importantly, it's price-performance ratio. It doesn't beat the A2 in performance but it more than makes up for it in the additional features.
I am going to keep the pro 3 as long as I can to see if prices drop even more (I'm all about the value). It's only my charging port that's gone so I'm taking out the battery and charging it externally for as long as I can. Everything else works normally. I'm also on my last ROM for this phone -- I can't flash another one because I changed to TWRP 3.2.1 which doesn't see my internal storage anymore (encryption).
Sent from my LeEco Le Pro3 using XDA Labs
tylerciggy said:
What ? $30 usd ? I've seen it in $2.5 for 2 boards, well, not original of course.
You just need to check that it has the extra IC, because there are ones that doesn't has it... although I don't remember what was for that IC, but you can easy see it that some boards just are missing a chip.
As for the cable, I'm using some EFFE cables (EFFE is the brand) and they are working wonderfully, I bought 3 for $7 usd, they plug in fine and stay in too, they were recommended to me by a friend and I'm very happy with them. They even stop giving charge to my dead phone because they detect somehow that there is a short, well, at least that is what my usb meter tells me, although I don't know how do they manage to do that, I don't really think they have an IC in them.
Click to expand...
Click to collapse
Sorry I hadn't seen this post. The cheaper boards tagged as "copy" boards don't have working quick charge or ability to connect to pc for mtp file transfer. They're only good for slow charging and sometimes even that is hit or miss. The boards that cost between $25 and $30 are original leeco boards. Probably not brand new but original. They have all features of the original like quick charge, mtp, otg, cdla and everything else the new phone could do. I wouldn't even consider going close to the cheaper "copy" boards.
I had a single 50 cm baseus USB cable that i bought for around $4 and it was of very good quality. It even supported usb PD and it was built like a tank. Just holding it gives you confidence that it's gonna last a while. Even the board getting fried didn't damage the cable but I'm not using it again. The power pin on the usb cable changed from gold to just plain silver so it must have taken some damage. I would buy a new one to be safe.
I'm done repairing this phone for good. It's not worth the expense and there's too much uncertainty involved even after it's fixed. I could fix it and have it die barely a month later. That would be $50 down the drain. I'm not going through that again.
Sent from my LeEco Le Pro3 using XDA Labs
It seems this phone is on its last leg now. Since yesterday the proximity sensor doesn't work. I think it must be all this opening and closing up of the metal shield to remove the battery. Also, the earpiece speaker only works in loudspeaker mode now. It doesn't work in calls. I think I might have an audio related software issue because sound isn't playing even if I play a music or video file. I have flashed another ROM but this behavior remains. Could this require me to flash persist?
Edit: The earpiece and proximity sensor are acting up because of the damaged USB board. Both work well when I use an app that tests hardware features. They are failing to work for phone calls and video playback because the phone is detecting that I have earphones plugged in. I figured this out when I reflashed a new PIE ROM and saw the headphone icon is always displayed on the status bar even without anything connected to the port. I guess the board getting fried messed up with jack detection.
@tsongming Please tell me if this motherboard is le pro3 x722 or le pro3 x720.
https://drive.google.com/file/d/1DD0JQRZe4t4KOmedt0eEThaGEOKBH3AZ/view?usp=sharing
Hi are there any decent apps that measure real battery performance and capacity to see how used a battery is? My device is 2 years old and until Samsung release the note 21 I certainly won't be downgrading to the zfold3 - in fact their reluctance to produce a new note over these silly fragile folding things I may even jump to Pixel 6 Pro when released soon.
However in the meantime I can no longer make a full day so probably worth getting a new battery. I had popped into the regional samsung centre to see if they would do it but had to wait 2 weeks - still crap service from Samsung!
Can any of the local repair shops safely replace these with a decent battery? I'm inclined to avoid these tbh!!! Dont want another note 7 incident lol
safest bet, to my mind, is getting it directly from S
Get it replaced now.
They're pretty easy to do.
If it fails and swells it can damaged the display or worse.
You'll want the OEM seal to seal it properly.
Mine is also almost 2 years old and I have no problems with the battery life
/CK
Double check what's running in the background too