my current software version is 6.12.401.4
can I go back to its stock rom using RUU?
and the phone is European WWE. is there any way to convert it to WWE Asia?
DM Yeamin said:
my current software version is 6.12.401.4
can I go back to its stock rom using RUU?
Click to expand...
Click to collapse
Yes, you can use the RUU.zip and method from here: https://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
DM Yeamin said:
and the phone is European WWE. is there any way to convert it to WWE Asia?
Click to expand...
Click to collapse
You mean fully convert using RUU? You would need s-off ($25 by sunshine app, unless it already happens to be s-off) and change the CID. Unless you are seeking the change the band support, its probably not worth it to fully convert.
Related
I have flashed my t-mobile M8 to GPE stock 4.4.2 ROM and stock gpe recovery.
Can I receive the GPE 's 4.4.3 OTA and update to 4.4.3?
leon912 said:
I have flashed my t-mobile M8 to GPE stock 4.4.2 ROM and stock gpe recovery.
Can I receive the GPE 's 4.4.3 OTA and update to 4.4.3?
Click to expand...
Click to collapse
Did you set your CID to the Google one? If so, it should work.
TO GET OTA UPDATES AND NOT HAVE THEM FAIL YOU WILL HAVE TO CHANGE YOUR CID TO MATCH THE GPE CID,
In fastboot mode type fastboot oem writecid GOOGL001.
(from this thread: http://forum.xda-developers.com/showthread.php?t=2708589 )
tublah said:
Did you set your CID to the Google one? If so, it should work.
TO GET OTA UPDATES AND NOT HAVE THEM FAIL YOU WILL HAVE TO CHANGE YOUR CID TO MATCH THE GPE CID,
In fastboot mode type fastboot oem writecid GOOGL001.
(from this thread: http://forum.xda-developers.com/showthread.php?t=2708589 )
Click to expand...
Click to collapse
Thank you very much. Now I have a superCID:1111111. I will change it and have a try.
By the way, the model id is t-mobile model id. Is it necessary to change this id?
leon912 said:
Thank you very much. Now I have a superCID:1111111. I will change it and have a try.
By the way, the model id is t-mobile model id. Is it necessary to change this id?
Click to expand...
Click to collapse
From what I've read, you don't need to change the MID, but it couldn't hurt to change it to the Google MID.
tublah said:
From what I've read, you don't need to change the MID, but it couldn't hurt to change it to the Google MID.
Click to expand...
Click to collapse
Thank you again. I have read a post on the General M8 thread, he received the OTA push after flash the ruu on his t-mobile M8. only CID is GOOGL001. It looks the same hardware between the GPE M8 and T-mobile version.
Okay my original Cid is H3G__106 and I'm super Cid now, I downloaded htc 001 nandroid backup and changed my Cid to htc 001, as well looked for updates but the update fails in philz.
I need the newer firmware for the new viper rom. (4.4.3 base).
How can I get it?
Shebee said:
Okay my original Cid is H3G__106 and I'm super Cid now, I downloaded htc 001 nandroid backup and changed my Cid to htc 001, as well looked for updates but the update fails in philz.
I need the newer firmware for the new viper rom. (4.4.3 base).
How can I get it?
Click to expand...
Click to collapse
OTA ZIP COLLECTION
BerndM14 said:
OTA ZIP COLLECTION
Click to expand...
Click to collapse
I assume I then need to use the h3g 106 one since the htc001 didn't work. Problem is I have 401.5 and there is no update for that.
Shebee said:
I assume I then need to use the h3g 106 one since the htc001 didn't work. Problem is I have 401.5 and there is no update for that.
Click to expand...
Click to collapse
Did you try to convert your device to international? MID and everything changed to International version? I'm not sure what the MID is for your device but if it's different than 0P6B10000 (International WWE) then it had to have been changed as well before you can convert to WWE version.
401.5 ? For what, 1.54.401.5 ... 2.22.401.5 ?
If you don't want to convert to International, rather go back download your backup from the collection thread and update your device to newest firmware from there.
BerndM14 said:
Did you try to convert your device to international? MID and everything changed to International version? I'm not sure what the MID is for your device but if it's different than 0P6B10000 (International WWE) then it had to have been changed as well before you can convert to WWE version.
401.5 ? For what, 1.54.401.5 ... 2.22.401.5 ?
If you don't want to convert to International, rather go back download your backup from the collection thread and update your device to newest firmware from there.
Click to expand...
Click to collapse
I only changed Cid nothing else. Is there a guide on how to fully convert to international edition?
Atm I'm 1.54.401.5
Problem is the stock thread doesn't have philz recovery backup for h3g 106 1.54.401.5
Shebee said:
I only changed Cid nothing else. Is there a guide on how to fully convert to international edition?
Atm I'm 1.54.401.5
Problem is the stock thread doesn't have philz recovery backup for h3g 106 1.54.401.5
Click to expand...
Click to collapse
The guides that I saw are for changing AT&T into Developer Edition or [GUIDE] S-OFF REQUIRED!! full conversion of GSM m8s to dev edition
Even though it's converting to a developer edition the philosophy behind it is the same when you change to WWE International version. Just use the correct backups, firmwares, MID and CID.
In step 1 you'll follow the thread and use the code for the HTC_Europe MID (0P6B10000).
For step 2 you'll just use HTC__001 as as the CID
Step 3 you'll grab the nandroid backup + stock recovery for the WWE International version (x.xx.401.x ) Rather use an older version like 1.54.401.5/10 and do updates from there, it'll be easier if you don't want to manually flash firmware and OTA's.
If you continue the way he has it in his guide then you'll get the firmware from the OTA collection thread(Just extract it from OTA.zip) or you can get firmware for device from mike1986's Androidrevolution.org
It's for a different device but the idea is the exact same.
BerndM14 said:
The guides that I saw are for changing AT&T into Developer Edition or [GUIDE] S-OFF REQUIRED!! full conversion of GSM m8s to dev edition
Even though it's converting to a developer edition the philosophy behind it is the same when you change to WWE International version. Just use the correct backups, firmwares, MID and CID.
In step 1 you'll follow the thread and use the code for the HTC_Europe MID (0P6B10000).
For step 2 you'll just use HTC__001 as as the CID
Step 3 you'll grab the nandroid backup + stock recovery for the WWE International version (x.xx.401.x ) Rather use an older version like 1.54.401.5/10 and do updates from there, it'll be easier if you don't want to manually flash firmware and OTA's.
If you continue the way he has it in his guide then you'll get the firmware from the OTA collection thread(Just extract it from OTA.zip) or you can get firmware for device from mike1986's Androidrevolution.org
It's for a different device but the idea is the exact same.
Click to expand...
Click to collapse
Basically I just change Cid and mid, then I'm basically converted?
Shebee said:
Problem is the stock thread doesn't have philz recovery backup for h3g 106 1.54.401.5
Click to expand...
Click to collapse
The BIGGEST problem is no such thing as h3g 106 1.54.401.5 in this world
ckpv5 said:
The BIGGEST problem is no such thing as h3g 106 1.54.401.5 in this world
Click to expand...
Click to collapse
Umm I got H3G__106 CID and 1.54.401.5 (through venom) soo. What should I do...
Shebee said:
Umm I got H3G__106 CID and 1.54.401.5 (through venom) soo. What should I do...
Click to expand...
Click to collapse
1.54.401.5 is old Venom ROM version no.
H3G__106 firmware is : 1.54.771.9 (for 4.2.2) and you need the updated firmware 2.22.771.5 to run Venom 4.4.3
So download the OTA 1.54.771.9 -> 2.22.771.5 thanks @houstie, open it with 7-zip, extract out the firmware.zip and flash that in RUU mode.
Then reflash Philz recovery and install latest Venom ROM ...done
Shebee said:
Basically I just change Cid and mid, then I'm basically converted?
Click to expand...
Click to collapse
And placing the correct firmware/rom on it. You are S-OFF though, right? I didn't see you mention it so I'm just basically running on an assumption here?
ckpv5 said:
1.54.401.5 is old Venom ROM version no.
H3G__106 firmware is : 1.54.771.9 (for 4.2.2) and you need the updated firmware 2.22.771.5 to run Venom 4.4.3
So download the OTA 1.54.771.9 -> 2.22.771.5 thanks @houstie, open it with 7-zip, extract out the firmware.zip and flash that in RUU mode.
Then reflash Philz recovery and install latest Venom ROM ...done
Click to expand...
Click to collapse
Thanks I'll try that today.
BerndM14 said:
And placing the correct firmware/rom on it. You are S-OFF though, right? I didn't see you mention it so I'm just basically running on an assumption here?
Click to expand...
Click to collapse
Ye I'm soff rooted unlocked bootloader etc.
Kind of wondering why your using philz instead of TWRP
jake.99x3 said:
Kind of wondering why your using philz instead of TWRP
Click to expand...
Click to collapse
Why not. Twrp is not "better" than philz and vice versa.....
If you want ViperOne, you'll want to switch to TWRP. It's on the OP on their thread.
Also, the super id I use is 11111111. Try that and see if it works.
Sorry I didn't quote you Mr Hofs, but I'm not sure how to yet on tapatalk.
EDIT just figured it out. Next time
hi, i have a problem to find a recovery stock for 1.12.600.20, i need for install stock rom, mi telephone is carrier TELCEL (MEXICO), i have s-off, super cid, unlock bootloader, and i want install a europe RUU lollipop, someone could me if is necessary install to recovery stock, or some other method???
Thanks
You don't need stock recovery to run an RUU.
But you do need to change the device's CID and MID to match the RUU.
redpoint73 said:
You don't need stock recovery to run an RUU.
But you do need to change the device's CID and MID to match the RUU.
Click to expand...
Click to collapse
There problem is that my MID 0P6B16000 ????
chevega92 said:
There problem is that my MID 0P6B16000 ????
Click to expand...
Click to collapse
As I already stated, if you want to run the Euro RUU, you need to change your MID and your CID to the Euro CID, MID.
If either (or both) CID or MID do not match what the RUU is looking/intended for, the RUU will fail.
Can you flash a different RUU on a carrier locked phone... So for example I'm on H3G, could i downgrade and flash a European RUU?
AwaisKhan said:
Can you flash a different RUU on a carrier locked phone... So for example I'm on H3G, could i downgrade and flash a European RUU?
Click to expand...
Click to collapse
You need s-off and matching mid and cid for a full conversion, or you could s-off and flash a different firmware with a custom rom
v1rk said:
You need s-off and matching mid and cid for a full conversion, or you could s-off and flash a different firmware with a custom rom
Click to expand...
Click to collapse
What is s-off & is it free?
AwaisKhan said:
What is s-off & is it free?
Click to expand...
Click to collapse
No its not its around $25 and allows you customise your phone turning into any variant you want or if you wanted to make it unbranded you can with security settings off. The website link tells you more about http://theroot.ninja/
wat up peeps.
I was wondering if it's possible to downgrade using a ruu.exe file i found on androidruu.com called "RUU_HIMA_UHL_L50_SENSE70_HTC_Europe_1.32.401.17_Radio_01.01_U11440261_56.02.50306G_2_F_release_429340_signed_2_4.exe"?
I have an HTC one m9 europe, codename: hima_uhl - MID: 0PJA10000, SKU: 401 - CID: HTC__001 and im currently running 4.14.401.7, also im completely stock (s-on, locked, official)
n3rk0_b4rc4 said:
wat up peeps.
I was wondering if it's possible to downgrade using a ruu.exe file i found on androidruu.com called "RUU_HIMA_UHL_L50_SENSE70_HTC_Europe_1.32.401.17_Radio_01.01_U11440261_56.02.50306G_2_F_release_429340_signed_2_4.exe"?
I have an HTC one m9 europe, codename: hima_uhl - MID: 0PJA10000, SKU: 401 - CID: HTC__001 and im currently running 4.14.401.7, also im completely stock (s-on, locked, official)
Click to expand...
Click to collapse
That won't work. Read the readme post at the top of this forum (the RUU section) for a full explanation.
hi,
i have read the readme as advised and i saw the following:
"This means on the other hand, that downgrades from 4.x to lower firmware versions aren't that easy, either. You need to flash a 3.x NoWipe or a 3.x Full-Wipe Firmware Pack before you're able to use 1.x, 2.x or 3.x RUUs, again."
can i flash the firmware 3.x full-wipe on the nougat using the adb commands while s-on then flash the ruu for the marshmallow using the sd card method?
zambalik said:
hi,
can i flash the firmware 3.x full-wipe on the nougat using the adb commands while s-on then flash the ruu for the marshmallow using the sd card method?
Click to expand...
Click to collapse
Nope. S-OFF first.
BiOMeX said:
Nope. S-OFF first.
Click to expand...
Click to collapse
How to get S-OFF while i am on nougat?
zambalik said:
How to get S-OFF while i am on nougat?
Click to expand...
Click to collapse
Try Sunshine