Note 2 stuck on samsung logo - Galaxy Note II Q&A, Help & Troubleshooting

Hi all,
My note 2 is stuck on Samsung logo. It can enter download mode as well as recovery.
Download mode info:
ODIN MODE
PRODUCT NAME: GT-N7100
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 1
RP SWREV: A2
In recovery mode, first the android icon comes with exclamation mark. Then I see
E: failed to mount / efs
E: failed to mount / system
... and so on
I tried to flash stock rom using odin but it fails.
NAND Write Start!!
FAIL!!
Please help me fix it. Thanks!

gizmofreakz said:
Hi all,
My note 2 is stuck on Samsung logo. It can enter download mode as well as recovery.
Download mode info:
ODIN MODE
PRODUCT NAME: GT-N7100
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 1
RP SWREV: A2
In recovery mode, first the android icon comes with exclamation mark. Then I see
E: failed to mount / efs
E: failed to mount / system
... and so on
I tried to flash stock rom using odin but it fails.
NAND Write Start!!
FAIL!!
Please help me fix it. Thanks!
Click to expand...
Click to collapse
Open odin in pc
Connect device
Go to download mode
choose (BL) tab in odin and flash file in link below will fix all errors.
Boot into recovery
Do wipe cache & factory reset.
Reboot.
If doesn't boot flash stock rom then factory reset .
Reboot.
https://mega.nz/#!3YtWAQyb!4w5TjsBP2Br6YkRmra6GauNBgcTp_mRLxLrRkuCMghI
This file works only with note 2 exynos n7100 variant & s3 i9300 exynos.
Good luck.

Thanks!
I tried but I still get the same error.
NAND Write Start!!
FAIL!
Complete (Write) operation failed.
Trex888 said:
Open odin in pc
Connect device
Go to download mode
choose (BL) tab in odin and flash file in link below will fix all errors.
Boot into recovery
Do wipe cache & factory reset.
Reboot.
If doesn't boot flash stock rom then factory reset .
Reboot.
This file works only with note 2 exynos n7100 variant & s3 i9300 exynos.
Good luck.
Click to expand...
Click to collapse

gizmofreakz said:
Thanks!
I tried but I still get the same error.
NAND Write Start!!
FAIL!
Complete (Write) operation failed.
Click to expand...
Click to collapse
You have a corrupted NAND, you will need to replace the motherboard..sorry.

gizmofreakz said:
Thanks!
I tried but I still get the same error.
NAND Write Start!!
FAIL!
Complete (Write) operation failed.
Click to expand...
Click to collapse
Did you flash 4.2.2 kitkat stock rom ?
Because if you tried flash 4.1 jellybean it won't flash it will fail .
Try Flash Twrp recovery and flash any kitkat rom .

Related

Stuck at Boot Screen

Hey guys,
The GT-N7100 of my friend does not boot.It is stuck at the first screen ( Black screen with samsung galaxy note II gt-n7100).
He tried to install a custom rom and installed a Custom Recovery. In Custom Recovery the cache partition couldnt be load. So I cant wipe or format anything. If I want to install a zip, the Recovery just get stuck before even selecting a zip file.
I can access download mode. So I tried to flash another recovery. Odin says successful but the recovery is still the same ????
I also tried to flash a stock rom with Odin... nothing changed
So I dont know what to do next
Please help me!
Thanks in advance
Luke44 said:
Hey guys,
The GT-N7100 of my friend does not boot.It is stuck at the first screen ( Black screen with samsung galaxy note II gt-n7100).
He tried to install a custom rom and installed a Custom Recovery. In Custom Recovery the cache partition couldnt be load. So I cant wipe or format anything. If I want to install a zip, the Recovery just get stuck before even selecting a zip file.
I can access download mode. So I tried to flash another recovery. Odin says successful but the recovery is still the same ????
I also tried to flash a stock rom with Odin... nothing changed
So I dont know what to do next
Please help me!
Thanks in advance
Click to expand...
Click to collapse
well flash philz recovery via odin
untick "autoreboot" in odin. Once flash is done, keep pressing power button until it reboots (normally will go to recovery)
when in recovery, if you choose option "reboot system now" and you get "yes - disable flash recovery", select that option to avoid stock recovery overwriting cwm
now proceed with wipe and after flashing rom ,fix permission and wipe cache and dalvic cache twice then reboot
shhbz said:
well flash philz recovery via odin
untick "autoreboot" in odin. Once flash is done, keep pressing power button until it reboots (normally will go to recovery)
when in recovery, if you choose option "reboot system now" and you get "yes - disable flash recovery", select that option to avoid stock recovery overwriting cwm
now proceed with wipe and after flashing rom ,fix permission and wipe cache and dalvic cache twice then reboot
Click to expand...
Click to collapse
I flashed philz recovery. After pressing the power button just the battery symbol appeared... no reboot. So I treid to boot into the new recovery... but still the old recovery boots
Heres the log from Odin:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_5.11.2-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
http://forum.xda-developers.com/showpost.php?p=32273406
I wanted to try this, but this download contains just one file. Even if I extract the tar, there are not the files included which are discribed in the thread...
quite strange....
I simply cant flash anything with Odin. Odin says success, but nothing happened to the phone. I didnt read something about people who are having the same issue
This drives me mad .....
Luke44 said:
http://forum.xda-developers.com/showpost.php?p=32273406
I wanted to try this, but this download contains just one file. Even if I extract the tar, there are not the files included which are discribed in the thread...
quite strange....
I simply cant flash anything with Odin. Odin says success, but nothing happened to the phone. I didnt read something about people who are having the same issue
This drives me mad .....
Click to expand...
Click to collapse
well its not sds for sure so it seems either recovery has gone corrupted as,the pit file u said is not required though u can find it here to http://forum.xda-developers.com/showthread.php?t=1896696 post 4 no4 pit file16gb
but i would suggest you to try the recovery thing as mentioned in the link as see as the one i mentioned is used when it does not enter recovery try this version http://d-h.st/vCc
keep the power button pressed it should enter recovery leave the power button when u see samsung logo
I did it long time back so dont remember exactly whether to keep pressing power button or to hold power button worked for me as auto reboot was not working for me so did the other way round as mentioned to you
shhbz said:
well its not sds for sure so it seems either recovery has gone corrupted as,the pit file u said is not required though u can find it here to http://forum.xda-developers.com/showthread.php?t=1896696 post 4 no4 pit file16gb
but i would suggest you to try the recovery thing as mentioned in the link as see as the one i mentioned is used when it does not enter recovery try this version http://d-h.st/vCc
keep the power button pressed it should enter recovery leave the power button when u see samsung logo
I did it long time back so dont remember exactly whether to keep pressing power button or to hold power button worked for me as auto reboot was not working for me so did the other way round as mentioned to you
Click to expand...
Click to collapse
Im glad to hear that it is not sds.
I tried to flash the recovery of your link:
If I leave the phone connected if I press the power button after flashing just the battery symbol apears after a while.
If I disconnect the phone, it tries to boot normal...no recovery...
If I tap on the power button again and again nothing happens.....
If I try to boot into recovery with the 3 button combo there is still the old clockwork recovery.
I also tried to do a emergency recovery with kies. Kies does download all the files and when it starts to flash it gets stuck at 0 % and sais phone is not connected in the right way but it is...
In Odin mode the phone displays
custom binary downloads : Yes ( 1 counts)
But did flash the recovery at least 3 times ...So why does it still display 1
Luke44 said:
Im glad to hear that it is not sds.
I tried to flash the recovery of your link:
If I leave the phone connected if I press the power button after flashing just the battery symbol apears after a while.
If I disconnect the phone, it tries to boot normal...no recovery...
If I tap on the power button again and again nothing happens.....
If I try to boot into recovery with the 3 button combo there is still the old clockwork recovery.
I also tried to do a emergency recovery with kies. Kies does download all the files and when it starts to flash it gets stuck at 0 % and sais phone is not connected in the right way but it is...
In Odin mode the phone displays
custom binary downloads : Yes ( 1 counts)
But did flash the recovery at least 3 times ...So why does it still display 1
Click to expand...
Click to collapse
do u have kies installed when u trying odin if yes then delete it just install the samsung drivers nothing else and disable your antivirus too.
orelse u may try
thats quite strange ok now its time to try the mskip tool just delete all old samsung drivers and kies
and start fresh from here http://forum.xda-developers.com/showthread.php?t=1923956
and as far as the count in concerned its 1 as you were only able to enter recovery once thats why after that u were not able to so as many times u enter custom recovery the count increases
http://forum.xda-developers.com/showthread.php?t=1896696
Do you think it makes sense todo re-partition with the pit file?
There is also a Bootloader to download on this site...
Luke44 said:
http://forum.xda-developers.com/showthread.php?t=1896696
Do you think it makes sense todo re-partition with the pit file?
There is also a Bootloader to download on this site...
Click to expand...
Click to collapse
i would say no until there is an error which shows no pit partition found but after the above steps if it does not then u can give it a fresh start flash the pit first then the firmware . check youtube as how to do it there are vidoes described on how to flash pit and then the firmware.
i would suggest not to do something which you are not sure of and land urself in other issues though flashing pit and firmware is fine but i am not sure about the bootloader maybe u can ask in that specific thread , keten might be the best person to guide you in that case if its safe
shhbz said:
i would say no until there is an error which shows no pit partition found but after the above steps if it does not then u can give it a fresh start flash the pit first then the firmware . check youtube as how to do it there are vidoes described on how to flash pit and then the firmware.
i would suggest not to do something which you are not sure of and land urself in other issues though flashing pit and firmware is fine but i am not sure about the bootloader maybe u can ask in that specific thread , keten might be the best person to guide you in that case if its safe
Click to expand...
Click to collapse
Sorry but I cant find such a viedo...
Luke44 said:
Sorry but I cant find such a viedo...
Click to expand...
Click to collapse
I tried to flsh this, but odin says:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
What exact information you can see on Download Mode Rt Upper corner.
post full details here
dr.ketan said:
What exact information you can see on Download Mode Rt Upper corner.
post full details here
Click to expand...
Click to collapse
In the right upper corner is nothing...
In the left upper corner:
ODIN MODE (written in red)
PRODUCT NAME: GT-N7100
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
Try different USB port, don't use any extension cable to connect device.
close firewall and still issue try different cable and PC
Download PIT
select it for PIT tab (It will auto select re-partition, keep it selected) - Flash
Also confirm Kies is not running in BG
Luke44 said:
Sorry but I cant find such a viedo...
Click to expand...
Click to collapse
There is I am on phn so would be difficult for me to find but its simple u just select the pit file first in odin and flash keeping ur phn in download mode and then the firmware tar file
Try different USB port, don't use any extension cable to connect device.
close firewall and still issue try different cable and PC
Download PIT
select it for PIT tab (It will auto select re-partition, keep it selected) - Flash
Also confirm Kies is not running in BG
Click to expand...
Click to collapse
I tried a different computer with different cable. On the computer I used this time there is not even kies installed.
Same result as before...
dr.ketan said:
Try different USB port, don't use any extension cable to connect device.
close firewall and still issue try different cable and PC
Download PIT
select it for PIT tab (It will auto select re-partition, keep it selected) - Flash
Also confirm Kies is not running in BG
Click to expand...
Click to collapse
I tried it a few more times..it really doesnt work
Whats wrong with this !"§$%& phone:crying::crying::crying:

[Q] Unable to root via Odin: Write protection: Enable

Hi guys, ladies,
I try to root my i9195 but Odin fails to write. I also noticed when putting in download mode that it says: Write protection: enable. See attached screenshot.
It's a Vodafone version of the S4 Mini, I can use different carrier SIM cards, but I cannot remove the Vodafone bloatware like 'Discover'.
Any ideas how to root this version and how to disable this Write Protection?
Thanks!
Andreas
Hello write protection is not the problem, I had the same trouble with mine you need to disable all antivirus and firewall temporarily then flash.
Sent from my GT-I9195 using XDA Premium 4 mobile app
Ezylife said:
Hello write protection is not the problem, I had the same trouble with mine you need to disable all antivirus and firewall temporarily then flash.
Sent from my GT-I9195 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Wow, that actually worked! Thank you
For everyone that is in the same process, I used Windows8 and disabled my firewall and Windows Defender.
I followed the following guide for rooting:
http://www.techbii.com/root-galaxy-s4-mini-cwm-recovery-installation-odin/
Andreas
adewilt said:
Wow, that actually worked! Thank you
For everyone that is in the same process, I used Windows8 and disabled my firewall and Windows Defender.
I followed the following guide for rooting:
http://www.techbii.com/root-galaxy-s4-mini-cwm-recovery-installation-odin/
Andreas
Click to expand...
Click to collapse
This did not work for me. under download mode it say Write Protection: Enable
Funny thing is that I get a PASS when i flash with odin. "<OSM> All threads completed. (succeed 1 / failed 0)" But when I boot the vodafone boot animation is still there. And if I Check under About it is still the old Product Code XFV not XFA which i just flashed.
I am loading
Product Code: XFA
PDA: I9190XXUAMF7
CSC: I9190OJVAMG1
MODEM: I9190XXUAMF7
It has this on:
Product Code: XFV
PDA: I9190XXUAMF7
CSC: I9190OJVAMG1
MODEM: I9190XXUAMF7
any ideas?
Fix Boot logo
jjziets said:
This did not work for me. under download mode it say Write Protection: Enable
Funny thing is that I get a PASS when i flash with odin. "<OSM> All threads completed. (succeed 1 / failed 0)" But when I boot the vodafone boot animation is still there. And if I Check under About it is still the old Product Code XFV not XFA which i just flashed.
I am loading
Product Code: XFA
PDA: I9190XXUAMF7
CSC: I9190OJVAMG1
MODEM: I9190XXUAMF7
It has this on:
Product Code: XFV
PDA: I9190XXUAMF7
CSC: I9190OJVAMG1
MODEM: I9190XXUAMF7
any ideas?
Click to expand...
Click to collapse
You need to go to recovery mode and do factory reset and wipe cache after that reboot. to go to recovery mode (volume up + Home Button + Power button)
didn't work...
baachs said:
You need to go to recovery mode and do factory reset and wipe cache after that reboot. to go to recovery mode (volume up + Home Button + Power button)
Click to expand...
Click to collapse
I have the same problem. my phone is on XFV and I'm trying to flash XFE, but it's still on XFV, even after wiping the cache and doing another factory reset after the initial reboot...
any other advice?
S4 i9505
Same here,
I'm stuck on Get PIT for mapping..
Luckily I was able to upload a bootloader so I can still change ROMs, but for the rest the phone is fu#d up.
Impossible to restore the pit file, impossible to upload new modem
Next time stay away from Saumsung
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
Click to expand...
Click to collapse
The boot animation can only be changed if you change it manually or flashing a stock ROM from sammobile.com, not by rooting.
If I where you, I flash an unbranded stock firmware with odin (go to sammobile.com, download it and follow the steps from there). That will remove vodafone's bloatware. And if you still want to root, go with it.
Problem with Odin Flash
Hi
I have a S4 mini (i9195) with StockRom 4.4.2. My Problem is when i flash a recovery with Odin (3.10) show Odin me "succes" but there is no custom recovery. Every time i boot in recovery there is only the stock recovery. I try to close BitDefender and WinFirewall and i do a FactoryReset and wipe cache i open Odin as Admin but it doesn´t work and the KnoxCounter stay always on 0x0!What can i do?
Syriass said:
What can i do?
Click to expand...
Click to collapse
Apart from disabling windows firewall, defender and antivirus... u must also terminate any kies programs running in the background. Go to taskmanager and choose processes tab. Then look for kies or any process with kies in its name. Right click on them and choose end.
Then try odin flashing again.
sasank360 said:
Apart from disabling windows firewall, defender and antivirus... u must also terminate any kies programs running in the background. Go to taskmanager and choose processes tab. Then look for kies or any process with kies in its name. Right click on them and choose end.
Then try odin flashing again.
Click to expand...
Click to collapse
Sorry i forgot it no Kies install and driver package is the last from Samsung!
The Problem was the StockRom or the Kernl! The Stock was VD2-I9195XXUCNJ6 I flash with Odin another Stock (DBT) and after this it works!
I have manged to install cwm recovery and Sammys root v2 zip for root access which I now have but still says
write protection: enable
Does this mean I'm still stuck with stock rom?
Sent from my GT-I9195
I plugged my phone in and I didnt get a response from my PC, but it works while in CyanogenMod, meaning it's not the cable. It says WRITE PROTECTION: enabled in the top corner and I uninstalled Avast! a while ago. Do I still need to disable windows firewall or what else can I try? I want to go back to stock, using Odin 3.09
Essem G said:
I plugged my phone in and I didnt get a response from my PC, but it works while in CyanogenMod, meaning it's not the cable. It says WRITE PROTECTION: enabled in the top corner and I uninstalled Avast! a while ago. Do I still need to disable windows firewall or what else can I try? I want to go back to stock, using Odin 3.09
Click to expand...
Click to collapse
Hello you can ignore write protection, but you need to temporarily disable all antivirus and firewall software and then it should work.
The way I solved this is by flashing a deknoxified bootloader. I can post my bootloader later
Did not work
Ezylife said:
Hello you can ignore write protection, but you need to temporarily disable all antivirus and firewall software and then it should work.
Click to expand...
Click to collapse
I went through control panel and disabled Windows Firewall, but when I did the same steps Odin still did not detect my phone with the "Added!!" message. Did I miss a step, are there more things to disable, or is Write Protection really a problem? Even if it's not, what does that message in BL mean because I don't remember that there before
Thanks for the help for now though, because now I hear the sound in Windows when I plug in my phone
Essem G said:
I went through control panel and disabled Windows Firewall, but when I did the same steps Odin still did not detect my phone with the "Added!!" message. Did I miss a step, are there more things to disable, or is Write Protection really a problem? Even if it's not, what does that message in BL mean because I don't remember that there before
Thanks for the help for now though, because now I hear the sound in Windows when I plug in my phone
Click to expand...
Click to collapse
What's your current ROM? I seen issues with people running cm ROMs and computer doesn't find the connect phone/tablet. If n almost any other ROM it should be fine. Just seems cm ROM don't like commuters
Sent from my GT-I9195
Weird
jimbomodder said:
What's your current ROM? I seen issues with people running cm ROMs and computer doesn't find the connect phone/tablet. If n almost any other ROM it should be fine. Just seems cm ROM don't like commuters
Sent from my GT-I9195
Click to expand...
Click to collapse
Strangely enough, I switched my USB port on my PC and it flashed normally. However, if you could help me on my other post that would be nice
http://forum.xda-developers.com/gal...problems-flashing-stock-t3129207#post61217108
I need your hel to disable write protection via odin on i9505
I have ROM: I9505XXUHOA7_OXAHOA7
Here is the message:
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Ill try and download another firmware Now.

[Q] Tab pro 12.2 stuck in bootloop

Hi everyone!
My Galaxy tab pro (SM-T900) is stuck in bootloop. More precisely I can see the first Samsung galaxy tab pro screen but it restart before the samsung animation.
The tab was initially with official rom rooted with CF-Auto-Root-v2wifi-v2wifixx.
I have already tried several things without significative improvement.
At first I tried to reinstall with Kies. Kies says my version is: PDA:NB5/CSC:NB2 (XEF). But after the window asking to reboot in download mode kies stops saying my device can not be recovered. I have read it could be due to a discrepancy of CSC or things like that between Kies and the Tab.
Recovery mode says:
Odin mode
Product name: SM-T900
Current binary: Official samsung
System status: Custom
KNOX waranty void: 1
RP SWREV: A1
My Knox flag was turned to 1 and I don't know how to set System status back to official.
I have also downloaded the stock ROM XEF from Sammobile and flashed it with odin 3.09. The process goes smoothly but the tab doesn't boot.
Even after a wipe (data/factory reset and cache) in recovery mode.
In recovery mode I could not install Cyanogenmod or other Zip files. The process stop during the package verification and says:
E:footer is wrong
E:signature verification failed
I flashed a TWRP 2.8 to try with a different recovery but again the Zip are not installed.
Have you any idea or any direction to investigate?
Thank you
If ur tab is US version then u have to flash XAR(cellular south) available through sammobile through odin and then let tab update itself after reboot. U will loose root
Sent from my LG-D800 using XDA Free mobile app
lingarajug said:
If ur tab is US version then u have to flash XAR(cellular south) available through sammobile through odin and then let tab update itself after reboot. U will loose root
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
Actually my tab is from France so XEF version is the most adapted.
I think flashing a different version would be rejected. Right?
Yes it can brick too
Sent from my LG-D800 using XDA Free mobile app
You can flash any ROM as long as it is for SM-T900. The builds may have different apps, keyboards, and WiFi connectivity can be an issue due to WiFi channels being slightly different for each region.
The thing is that flashing zip in recovery mode leads to the error: footer is wrong.
Is there any log file I could read to find where the boot process loops?
If dodo99x is right u can flash xar version which is for usa and flash it through odin
Sent from my LG-D800 using XDA Free mobile app
I tried to flash XAR and XAC stock roms but Odin return a Fail with the following log:
<ID:0/012> Added!!
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> SingleDownload.
<ID:0/012> sboot.bin
<ID:0/012> NAND Write Start!!
<ID:0/012> boot.img
<ID:0/012> recovery.img
<ID:0/012> system.img
<ID:0/012> FAIL!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
As tar.md5 files doesn't have exactly the same size, I wonder if it is necessary to check Re-partition in Odin.
Never ever touch repartition. Super dangerous if you don't have the correct .pit file to recreate them. Those sound like bad downloads. You can also try to use a different usb cable and usb port on your pc.
I have successfully downloaded and installed the last rom stock revision for France: T900XXUANI1_T900XEFANI2_XEF
But I'm still stucked in Bootloop.
Other versions (XAR and XAC) still fail.
How can I get the PIT file for SM-T900?
As I can see and copy files with TWRP, is there any log file I should check to see what is wrong?
I would try wiping cache, sytem, dalvik, data and internal storage in twrp, then reinstall the france image file in Odin. This will of course erase all data you have on the tablet, but it should take you out of your bootloop. I have yet to see any valid PIT files for the SM-T900, or SM-P900. If you mess with the partitions without one, you won't even be able to flash anything in Odin afterwards.
No problem for the personnal data. I just would like to recover my tab.
I have wiped all the internal partitions: Dalvik, cache, system, internal data.
I have reboot in download mode and launched a flash of the T900XXUANI1_T900XEFANI2_HOME.tar.md5 with Odin 3.09
I also used voodoo magic!
But still the bootloop
I think the problem comes from an other partition not flashed with this process.
What other partitions are used to start Android?
Is there any log file to check?
Very unusual... try flashing cm11 for SM-T900 via TWRP. Will that one boot?
No The Cyanogen ROM doesn't boot either.
I'm still looking deeper in the boot process to identify the problem.
While I was reading this: http://en.miui.com/thread-15659-1-1.html
I just realized that the misc partition was absent from my tab.
I create an empty one and reflashed a stock rom but it doesn't solve the boot problem.
What files are usualy inside misc? Where can I find a copy of them?
At this point I would just get Samsung to fix it. Unless you can find a PIT file for ODIN...
Even with Knox value to 1 and custom Rom/kernel/recovery?
Do you think Samsung will reset my tab in those conditions?
By the way, when I look in the Boot folder with TWRP file manager, I don't see any file. The boot partition indicates an occupied size of 8Mo.
Where are those files? How can I acces to them?
Knox warranty has nothing to do with your hardware warranty. Just reflash stock rom via ODIN and send it back. Tell them you can't get it to boot, and that's it.
Do u know if u have usb debugging enabled. Maybe try booting into rom after complete wipe of all. It will probably sit on sam logo and will not boot due to no firmware and wait for few minutes and restart into download mode and flash correct firmware from sammobile. I did this in my old galaxy s 2 long long ago and it worked.
Sent from my LG-D800 using XDA Free mobile app
Hi,
Just a short feedback.
I finally succeed to finish the restoring process of Kies but it didn't fixed my bootloop and the Download mode indicated:
Current binary: Samsung official
System status: Custom
Knox warranty void: 0x1
I decided to return the device to Samsung (France).
3 weeks after: tadaam! Everything was fixed. Samsung changed my motherboard and battery.
No charge and no warranty void due to knox or rom modification.
I am so released
... I am now looking for a way to root the device without triggering knox
Is triangle away working with SM-T900?
Moklockus said:
Even after a wipe (data/factory reset and cache) in recovery mode.
In recovery mode I could not install Cyanogenmod or other Zip files. The process stop during the package verification and says:
E:footer is wrong
E:signature verification failed
I flashed a TWRP 2.8
Click to expand...
Click to collapse
To fix this try
Advanced wipe with everything ticked except recovery then try to flash zip without reboot.
Helped me on the footer issue and if this succeeds you should be able to boot.
Hope that helps

SM-T111 3G 8GB tab nand write failed and stuck on factory mode

HI
I have a Samsung galaxy tab 3 lite SM-T111 and the tab had a problem about /efs invalid argument.
i was tried to fixed it already by install twrp recovery and the efs is worked but after i flashed back to stock firmware THL-T111XXUANB2 after pass on odin it suddenly showed
E: /system invalid
/cache invaild argument
then switch off automatically.
Now my device is stuck on factory mode only and even i tried to firmware restore by odin it shows nand write start failed. I tried to restored with pit file also it let pit file pass but when it started to flash firmware it failed on nand write start!
it that anyway to fix it guys?? May be my pit file is wrong or something happening. So pls let me know guide way to fix it. I hope that wont be emmc chip error.
Thanks you guys.
no one want to help..
help samsung sm t111 flash failed
kohtoo said:
no one want to help..
Click to expand...
Click to collapse
help me
kohtoo said:
HI
I have a Samsung galaxy tab 3 lite SM-T111 and the tab had a problem about /efs invalid argument.
i was tried to fixed it already by install twrp recovery and the efs is worked but after i flashed back to stock firmware THL-T111XXUANB2 after pass on odin it suddenly showed
E: /system invalid
/cache invaild argument
then switch off automatically.
Now my device is stuck on factory mode only and even i tried to firmware restore by odin it shows nand write start failed. I tried to restored with pit file also it let pit file pass but when it started to flash firmware it failed on nand write start!
it that anyway to fix it guys?? May be my pit file is wrong or something happening. So pls let me know guide way to fix it. I hope that wont be emmc chip error.
Thanks you guys.
Click to expand...
Click to collapse
U are using tab 3 neo SM-T111 if are using any rom in this tab so plzz help me I also want to flash a ROM in my tab I am also using tab 3 s
Smt111
Use Odin v3.07 and check Nand Erase All

S4 Mini Bricked?

My sister's S4 mini suddenly died, I cannot open the smartphone nor go on Recovery or download mode.
I used a debrick.img found here on xda put on a externaSD and manage to enter the download mode, then i try to flash a stock rom but it got stuck during the process (i leave odin running for hours without any success).
After that, when i retry the process this is what i got on screen:
Code:
BOOT RECOVERY MODE
CHECK BOOT PARTITIONS. .
COPY FROM T-FLASH. .
WRITE 139008 sectors. .
FLASH WRITE FAILURE
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-I9195
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
BOOTLOADER AP SWREV: 2
CSB-CONFIG-SLB: 0x30
WRITE PROTECTION: ENABLE
I try to flash different .pit file found here on xda for the i9195 but if i try to flash (using Odin 3.13 or even odin 1.85) it says
Re-Partition operation failed or There is no PIT partition.
Any other idea i can try?
Maybe another .pit file for i9195 and a firmware that work with it?
Thanks to everyone
Goku_ssj3 said:
My sister's S4 mini suddenly died, I cannot open the smartphone nor go on Recovery or download mode.
I used a debrick.img found here on xda put on a externaSD and manage to enter the download mode, then i try to flash a stock rom but it got stuck during the process (i leave odin running for hours without any success).
After that, when i retry the process this is what i got on screen:
I try to flash different .pit file found here on xda for the i9195 but if i try to flash (using Odin 3.13 or even odin 1.85) it says
Re-Partition operation failed or There is no PIT partition.
Any other idea i can try?
Maybe another .pit file for i9195 and a firmware that work with it?
Thanks to everyone
Click to expand...
Click to collapse
I think her EMMc chip is probably dead, so needs replacing (new motherboard)

Categories

Resources