Develop Bugs

Just need a bit of help getting going

So Ive searched around and I just can't find a definitive answer so here is what I got.
I understand that this here; is how you use marshmallow with the new bootloader unlock and root: http://forum.xda-developers.com/not...t/howto-bootloader-unlock-upgrade-to-t3398144
I also know that I have to do this exploit first to unlock the bootloader: http://forum.xda-developers.com/note-4-verizon/general/note-4-verizon-bootloader-unlock-t3358913
My issue is I ended up getting forced OTA 2 weeks ago. So my current question is, Do I have to roll back to lollipop? Is root/unlock even possible for me? If so, How do I do that since I haven't rolled back before. Its been a while since I've been into rooting/roms. Is there a link to doing it for marshmallow to lollipop? Also what about the firmware?
Current Stats:
Model: SM-N910V
Baseband: N910VVRU2CPD1
Android Version: 6.0.1
Build: MMB29M.N910VVRU2CPD1
Kernel Version: 3.10.40
I just need an answer since Ive been reading threads the last 2 hours. Its confusing since the titles of most are how to unlock bootloader THEN goto marshmallow. Thanks Guys!

I think I solved it myself. Looking like I'm effed with this bootloader. Since I don't think its rootable or unlockable.

ThatRoo said:
I think I solved it myself. Looking like I'm effed with this bootloader. Since I don't think its rootable or unlockable.
Click to expand...
Click to collapse
You can try to roll back to 5.1.1 by flashing the full firmware (thanks, hsbadr!) using ODIN. You can unlock the bootloader on this version.
The question is, will your phone let you. In another thread, the success rate appears to be something less than 100%. I don't know what the harm would be... if you can't do it, ODIN will likely fail. At any rate, the attempt is on you. I can't be responsible for what happens.

douger1957 said:
You can try to roll back to 5.1.1 by flashing the full firmware (thanks, hsbadr!) using ODIN. You can unlock the bootloader on this version.
The question is, will your phone let you. In another thread, the success rate appears to be something less than 100%. I don't know what the harm would be... if you can't do it, ODIN will likely fail. At any rate, the attempt is on you. I can't be responsible for what happens.
Click to expand...
Click to collapse
I did it just trying to get cyanogen to work with wifi and data/cellular to keep. However my phone is dev now and TWRP is installed.

ThatRoo said:
I did it just trying to get cyanogen to work with wifi and data/cellular to keep. However my phone is dev now and TWRP is installed.
Click to expand...
Click to collapse
Then you're good to go.

douger1957 said:
Then you're good to go.
Click to expand...
Click to collapse
Just frustrated right now trying to get Wifi to work. It looks like its suggested to try Flashing MM Stock, Reroot and Re-unlock bootloader here:
http://forum.xda-developers.com/not...t/howto-bootloader-unlock-upgrade-to-t3398144
Then use TWRP after all that.

ThatRoo said:
Just frustrated right now trying to get Wifi to work. It looks like its suggested to try Flashing MM Stock, Reroot and Re-unlock bootloader here:
http://forum.xda-developers.com/not...t/howto-bootloader-unlock-upgrade-to-t3398144
Then use TWRP after all that.
Click to expand...
Click to collapse
Just make sure you're paying attention to what you're flashing. There are only three roms in the verizon development section that are able to utilize the 6.01 bootloader and modem. JASMINE ROM, PAULPIZZ 6.01 Beta and Cm13. The other roms are ports based on 5.1.1 so you may need to stay on the previous setup until more roms are updated
Tip the OP usually states what works/does not work and updates when things are fixed . The information changes quickly so sometimes you may need to read the thread from the end back to the beginning to see if your issues have been addressed

It was actually super simple once I found the thread on how to go back to 5.1.1 then how to take that and go unlocked w/ marshmallow chain. Last thing to figure out is disabling OTA on Jasmin ROM

Downgrading 6.0.1 to 5.1.1

Hi if anyone can help- I'm on the Verizon Samsung Galaxy Note 4 after 2 Note 7's and a Note 3 before that on Biggin's so I've sorta been out of the root game. I want to downgrade from 6.0.1 to 5.1.1. I am downloading the full firmware for the Note 4 from further back in this thread (N910VVRU2CPA1) and am currently on (N910VVRU2CPG2).
From what I understand, I need to do a factory reset, then go to Odin and flash the firmware. I have Odin 3.10.7 and am downloading the N910VVRU2CPA1 as we speak. I see 'hsbadr' firmwares in his thread and the PIT file TRLTE_USA_VZW.pit which I'm not sure is compatable pit file for the specific 5.1.1 firmware or the necessary pit file is included in the full firmware and can anyone tell me if these are the right steps?are these the right steps Any information would be greatly appreciated,
Thanks

@tjmethod by chance how did you process go, did you manage to root and unlock bootloader?

djisback said:
@tjmethod by chance how did you process go, did you manage to root and unlock bootloader?
Click to expand...
Click to collapse
I bought the phone already with 6.0.1 on it and read that you cannot unlock/ root it with mm on it and can only be done after downgrading to 5.1.1 so I haven't done anything yet

I'm in the same boat...Coming from a n7. Bought a n4 on eBay...It's got 601. Want to root...Guess we need to downgrade....Is it possible?

tjmethod said:
Hi if anyone can help- I'm on the Verizon Samsung Galaxy Note 4 after 2 Note 7's and a Note 3 before that on Biggin's so I've sorta been out of the root game. I want to downgrade from 6.0.1 to 5.1.1. I am downloading the full firmware for the Note 4 from further back in this thread (N910VVRU2CPA1) and am currently on (N910VVRU2CPG2).
From what I understand, I need to do a factory reset, then go to Odin and flash the firmware. I have Odin 3.10.7 and am downloading the N910VVRU2CPA1 as we speak. I see 'hsbadr' firmwares in his thread and the PIT file TRLTE_USA_VZW.pit which I'm not sure is compatable pit file for the specific 5.1.1 firmware or the necessary pit file is included in the full firmware and can anyone tell me if these are the right steps?are these the right steps Any information would be greatly appreciated,
Thanks
Click to expand...
Click to collapse
sudermatt said:
I'm in the same boat...Coming from a n7. Bought a n4 on eBay...It's got 601. Want to root...Guess we need to downgrade....Is it possible?
Click to expand...
Click to collapse
Before you can start rooting, you'll need to be on 5.1.1 BPA1. If you're currently on 6.0.1, just download the BPA1 firmware from Sammobile, factory reset on 6.0.1, then flash BPA1 stock via Odin.

quinciebee said:
Before you can start rooting, you'll need to be on 5.1.1 BPA1. If you're currently on 6.0.1, just download the BPA1 firmware from Sammobile, factory reset on 6.0.1, then flash BPA1 stock via Odin.
Click to expand...
Click to collapse
Hi thanks, I had called Samsung and talked to top tier tech support and was told that once the phone has been upgraded to 6.0.1., it cannot be downgraded. and that i need to search the rooting sites and try to find where someone has found a breach or workaround for unlocking the bootloader which will usually have a bounty but I dont know. top tier tech support has always been good. Do you think thats false it cannot be downgraded?

tjmethod said:
Hi thanks, I had called Samsung and talked to top tier tech support and was told that once the phone has been upgraded to 6.0.1., it cannot be downgraded. and that i need to search the rooting sites and try to find where someone has found a breach or workaround for unlocking the bootloader which will usually have a bounty but I dont know. top tier tech support has always been good. Do you think thats false it cannot be downgraded?
Click to expand...
Click to collapse
It's definitely false, when I rooted my phone, I downgraded from 6.0.1 to 5.1.1 without any issues.

quinciebee said:
It's definitely false, when I rooted my phone, I downgraded from 6.0.1 to 5.1.1 without any issues.
Click to expand...
Click to collapse
I will definately give it a go when I have the time, have you flashed a rom and if so which one, there must be some or some tweaks to get rid of the lag?

tjmethod said:
I will definately give it a go when I have the time, have you flashed a rom and if so which one, there must be some or some tweaks to get rid of the lag?
Click to expand...
Click to collapse
I'm currently using CM13 because of Xposed and overall stability, but there are newer roms out there.

quinciebee said:
I'm currently using CM13 because of Xposed and overall stability, but there are newer roms out there.
Click to expand...
Click to collapse
I am a little confused as to whether I've found the right firmwares but I've found the firmwares here:
https://forum.xda-developers.com/no...mware-firmware-kernel-modem-recovery-t2942937
If I am downgrading to 5.1.1. which this phone was obviously on before, I don't know what this phone was on since it currently is on the PL1 build which are not one of the two 6.0.1. builds on this page. I don't even know if that matters.. Anyway, the two 5.1.1. builds are PA1 and OK3. Do you know where any other firmwares out there that might show my current one and the previous build that it came from?
Thanks-

tjmethod said:
I am a little confused as to whether I've found the right firmwares but I've found the firmwares here:
https://forum.xda-developers.com/no...mware-firmware-kernel-modem-recovery-t2942937
If I am downgrading to 5.1.1. which this phone was obviously on before, I don't know what this phone was on since it currently is on the PL1 build which are not one of the two 6.0.1. builds on this page. I don't even know if that matters.. Anyway, the two 5.1.1. builds are PA1 and OK3. Do you know where any other firmwares out there that might show my current one and the previous build that it came from?
Thanks-
Click to expand...
Click to collapse
You want the PA1. It's really easy. Just sounds more complicated then it is. I am using the PaulPizz rom. It is very stable, good battery life, and spen and sview work. If you need any help, let me know.

ziggy71 said:
You want the PA1. It's really easy. Just sounds more complicated then it is. I am using the PaulPizz rom. It is very stable, good battery life, and spen and sview work. If you need any help, let me know.
Click to expand...
Click to collapse
Thanks bro I don't if I'll have time til this weekend to do this- Does this rom have tweaks to fix the aggravating galaxy lag? With a non rooted phone there's goin into recovery and deleting cache, DU speed and phone booster, cleaned but it's like they all have it- thanks again- lookin forward to rooting this damn thing

tjmethod said:
I am a little confused as to whether I've found the right firmwares but I've found the firmwares here:
https://forum.xda-developers.com/no...mware-firmware-kernel-modem-recovery-t2942937
If I am downgrading to 5.1.1. which this phone was obviously on before, I don't know what this phone was on since it currently is on the PL1 build which are not one of the two 6.0.1. builds on this page. I don't even know if that matters.. Anyway, the two 5.1.1. builds are PA1 and OK3. Do you know where any other firmwares out there that might show my current one and the previous build that it came from?
Thanks-
Click to expand...
Click to collapse
Yeah they're out there but that thread hasn't been updated recently. Basically the order after pf3 is pg2, pj2, and then cpl1. The one you want, if your planning on rooting, is bpa1. Also, as far as your question in the op about the pit file, it should really only be used if absolutely necessary. It's in case your partitions have been corrupted for some reason and you need to repartition your device.
Edit- I was going to link to those other firmwares but they are buried in the thread that your already looking in. Either way they aren't necessary for you to unlock your bootloader, you can go straight from cpl1 to bpa1.

kevintm78 said:
Yeah they're out there but that thread hasn't been updated recently. Basically the order after pf3 is pg2, pj2, and then cpl1. The one you want, if your planning on rooting, is bpa1. Also, as far as your question in the op about the pit file, it should really only be used if absolutely necessary. It's in case your partitions have been corrupted for some reason and you need to repartition your device.
Edit- I was going to link to those other firmwares but they are buried in the thread that your already looking in. Either way they aren't necessary for you to unlock your bootloader, you can go straight from cpl1 to bpa1.
Click to expand...
Click to collapse
Hey thanks for confirming all this. So all I need to download and install is the bpa1 firmware via Oden with the AP button I think- I've got a few different versions of Oden on my pc. It's been a while since I've flashed firmware on a phone but I remember it was easy. So just save my pictures, any files, etc. on the sd card, remove it, then do a factory reset or when I put the setting into usb download mode, and flash the firmware this will automatically factory reset the phone? Also earlier today Verizon has been trying to push an software upgrade. After I unlock the bootloader and install twrp then flash a rom, do I need to somehow disable the update notice. I remember having to do that once with another phone.
What rom are you on? Thanks again for the Info-
TJ

tjmethod said:
Hey thanks for confirming all this. So all I need to download and install is the bpa1 firmware via Oden with the AP button I think- I've got a few different versions of Oden on my pc. It's been a while since I've flashed firmware on a phone but I remember it was easy. So just save my pictures, any files, etc. on the sd card, remove it, then do a factory reset or when I put the setting into usb download mode, and flash the firmware this will automatically factory reset the phone? Also earlier today Verizon has been trying to push an software upgrade. After I unlock the bootloader and install twrp then flash a rom, do I need to somehow disable the update notice. I remember having to do that once with another phone.
What rom are you on? Thanks again for the Info-
TJ
Click to expand...
Click to collapse
Yeah that all sounds spot on. I would definitely do the factory reset before you start, but other than that your good. To block the updates, you can uninstall the SDM apps. There are 2 of those and you'll need root to remove them, but you can disable them without root with that debloater tool. The rom I'm currently using is kind of work in progress. I have a couple stock based roms in the dev section, one is stock_plus that has a stock feel with some mods added and the other is Modest Rom that is got some grace apps added and system ui mods. You can find them here and here if you want to check them out.

kevintm78 said:
Yeah that all sounds spot on. I would definitely do the factory reset before you start, but other than that your good. To block the updates, you can uninstall the SDM apps. There are 2 of those and you'll need root to remove them, but you can disable them without root with that debloater tool. The rom I'm currently using is kind of work in progress. I have a couple stock based roms in the dev section, one is stock_plus that has a stock feel with some mods added and the other is Modest Rom that is got some grace apps added and system ui mods. You can find them here and here if you want to check them out.
Click to expand...
Click to collapse
Awesome, I'm going to check those out but I forgot the biggest question of all... how to get rid of the Galaxy lag- is there a rom or tweak where this can be fixed since recovery cache delete and cleaning tools dont really do much?
Thanks again-

tjmethod said:
Awesome, I'm going to check those out but I forgot the biggest question of all... how to get rid of the Galaxy lag- is there a rom or tweak where this can be fixed since recovery cache delete and cleaning tools dont really do much?
Thanks again-
Click to expand...
Click to collapse
Custom kernels help a lot. The problem is it's kind of slim pickings for our specific model, but some of the international kernels work well too. Oscar kernel is made for the 910v so that's probably the most reliable but if your like me, I like to use a permissive kernel and Ram kernel is not a bad choice for that though it's not as feature rich.

kevintm78 said:
Custom kernels help a lot. The problem is it's kind of slim pickings for our specific model, but some of the international kernels work well too. Oscar kernel is made for the 910v so that's probably the most reliable but if your like me, I like to use a permissive kernel and Ram kernel is not a bad choice for that though it's not as feature rich.
Click to expand...
Click to collapse
I really dont know the difference... from what I remember a kernel is the layer between the software and the hardware- a key component of the os. I'm guessing the permissive ones can be used for different roms or firmware? You can probably tell I really don't that much about the root game. The last time I flashed a firmware was on my note 3 after I bricked it. Then rerooted and got on to biggins rom which was great ut I never understood or learned how to use xposed. Anyway, I downloaded Modest Rom, PJ2 _STOCK .tar and am downloading cpl1_tar but I know that once I flash bpa1 firmware which puts the phone back on 5.1.1. I see your roms are 6.0.1 roms, after I flash the bpa1, will the bootloader be unlocked? If so can I then just flash the cpla1_tar or is that not a full firmware? or use one of the two 6.0.1 firmwares from where I found the cpa1? Are the kernels different from 6.0.1 and 5.1.1 and where to find the downloads?? I appreciate the tips especially coming from a develpoer and i'm happy to make a donation- I'm not sure how?
Thanks again!

tjmethod said:
I really dont know the difference... from what I remember a kernel is the layer between the software and the hardware- a key component of the os. I'm guessing the permissive ones can be used for different roms or firmware? You can probably tell I really don't that much about the root game. The last time I flashed a firmware was on my note 3 after I bricked it. Then rerooted and got on to biggins rom which was great ut I never understood or learned how to use xposed. Anyway, I downloaded Modest Rom, PJ2 _STOCK .tar and am downloading cpl1_tar but I know that once I flash bpa1 firmware which puts the phone back on 5.1.1. I see your roms are 6.0.1 roms, after I flash the bpa1, will the bootloader be unlocked? If so can I then just flash the cpla1_tar or is that not a full firmware? or use one of the two 6.0.1 firmwares from where I found the cpa1? Are the kernels different from 6.0.1 and 5.1.1 and where to find the downloads?? I appreciate the tips especially coming from a develpoer and i'm happy to make a donation- I'm not sure how?
Thanks again!
Click to expand...
Click to collapse
Hey buddy, did you get it figured out? I broke my arm at work on Sunday and of course it's my right arm so I'm having some issues responding back on my note with one hand. I bet I've dropped this thing 20 times already.

kevintm78 said:
Hey buddy, did you get it figured out? I broke my arm at work on Sunday and of course it's my right arm so I'm having some issues responding back on my note with one hand. I bet I've dropped this thing 20 times already.
Click to expand...
Click to collapse
Oh man that sucks- hopefully they gave you some good pain meds. Anyway, I havent taken th plunge yet- once I get on to 5.1.1 then twrp, I want to go on to 6.0.1 but am unsure as to what point the bootloader is unlocked or exactly what to do to upgrade to 6.0.1 once I crack the bl. I just dont want to go through the dreaded set up everything twice.

Help regarding unrooting, restoring and accepting 7.1.1 OTA.

Hi. Im new here so please help me.
I have a Moto Z Play XT1635-02 on 7.0 with the 1st May Patch installed.
I unlocked the bootloader to root this device.
I rooted with this:
https://forum.xda-developers.com/moto-z-play/how-to/correct-rooting-moto-z-play-feb-17-t3560268
Now i want to go back to stock firmware to accept the OTA i just recieved for 7.1.1.
My main query is that, i have RETGB device and its on build number NPN25.137-24.3
I can't find any firmware for RETGB software channel.
I did find the OTA for this, which i have downloaded through the moto ota link generator tool by erfanoabdi.
Now, can any one guide me on how to restore stock without messing up my device?
I have downloaded two retail firmwares:
1)XT1635-02_ADDISON_7.0_NPNS25.137-24-1-9_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
2)XT1635-02_ADDISON_7.0_NPNS25.137-24-1-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
Is it safe to flash any of these on my May patched device or should i somehow find the may patched firmware?
Waiting for your kind replies! :')

sheri.khan said:
Hi. Im new here so please help me.
I have a Moto Z Play XT1635-02 on 7.0 with the 1st May Patch installed.
I unlocked the bootloader to root this device.
I rooted with this:
https://forum.xda-developers.com/moto-z-play/how-to/correct-rooting-moto-z-play-feb-17-t3560268
Now i want to go back to stock firmware to accept the OTA i just recieved for 7.1.1.
My main query is that, i have RETGB device and its on build number NPN25.137-24.3
I can't find any firmware for RETGB software channel.
I did find the OTA for this, which i have downloaded through the moto ota link generator tool by erfanoabdi.
Now, can any one guide me on how to restore stock without messing up my device?
I have downloaded two retail firmwares:
1)XT1635-02_ADDISON_7.0_NPNS25.137-24-1-9_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
2)XT1635-02_ADDISON_7.0_NPNS25.137-24-1-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
Is it safe to flash any of these on my May patched device or should i somehow find the may patched firmware?
Waiting for your kind replies! :')
Click to expand...
Click to collapse
Just flash the below link and you will be on 7.1.1, and yes it is that simple.
https://forum.xda-developers.com/moto-z-play/development/rom-single-dual-sim-t3620551

Jimi Mack said:
Just flash the below link and you will be on 7.1.1, and yes it is that simple.
https://forum.xda-developers.com/moto-z-play/development/rom-single-dual-sim-t3620551
Click to expand...
Click to collapse
Thank you!
I should flash this through TWRP?
Also after flashing this, the future OTA updates(If any) will be installed without any problems on my retgb channel?

sheri.khan said:
Thank you!
I should flash this through TWRP?
Also after flashing this, the future OTA updates(If any) will be installed without any problems on my retgb channel?
Click to expand...
Click to collapse
Yes on TWRP no on future updates.. being there is not official release for you. Plus the next major update if it happens would not be till O is released which we would not see till way after the new year.
Once you unlock bootloader and root, no going back...

Jimi Mack said:
Yes on TWRP no on future updates.. being there is not official release for you. Plus the next major update if it happens would not be till O is released which we would not see till way after the new year.
Once you unlock bootloader and root, no going back...
Click to expand...
Click to collapse
Thanks brother.
I don't seem to get why the RETGB firmware isn't released.
I literally can't find anyone except i guess two or just 3 people who have the same software channel.
Thanks again!

On the Verizon blackberry priv, there was a way to install the ROM with no Verizon bloatware, no rooting or anything.
Same with my T-Mobile s7 edge, is there something for the Verizon moto z play?

jzamalot said:
On the Verizon blackberry priv, there was a way to install the ROM with no Verizon bloatware, no rooting or anything.
Same with my T-Mobile s7 edge, is there something for the Verizon moto z play?
Click to expand...
Click to collapse
I don't think that its possible with the Verizon MZP.
There's no access for anyone to unlock its bootloader as of yet.
So there's no development for it either.
But who knows? Don't lose the hope! :'D

sheri.khan said:
I don't think that its possible with the Verizon MZP.
There's no access for anyone to unlock its bootloader as of yet.
So there's no development for it either.
But who knows? Don't lose the hope! :'D
Click to expand...
Click to collapse
Thanks, just wondering because the blackberry priv bootloader was also never unlocked or ever rooted

Hard Brick Moto Z Play

Guys, i'm literally in panic. I really need some help, please.
I have an unlocked bootloader, was using Nougat 7.1.1 with december security patch, but these sec. patch "bricked" my cam, so i downgraded to marshmallow but without flashing gpt.bin and bootloader.img, I upgraded to 7.0, and then upgraded to april sec. patch 2017, but after the ota was being installed, the phone bricked, i was not able to do anything. My led doesn't appears after anything. I tried a lot of blankflash files, but none of them worked for me, since those files were for users who were in 7.0(I guess), so i literally need your help guys, what to do? will Motorola release blankflash for us? I want my phone back, i use it all the time, I don't know what to do, i'm almost crying for this lost.
Please help me!
I've searched on the forum, but nothing worked.
IM IN PANIC OMG!

follow : https://forum.xda-developers.com/moto-z-play/how-to/guide-unbrick-moto-z-play-t3618492
and you should attach error log from blankflash.

xdaVTU said:
Guys, i'm literally in panic. I really need some help, please.
I have an unlocked bootloader, was using Nougat 7.1.1 with december security patch, but these sec. patch "bricked" my cam, so i downgraded to marshmallow but without flashing gpt.bin and bootloader.img, I upgraded to 7.0, and then upgraded to april sec. patch 2017, but after the ota was being installed, the phone bricked, i was not able to do anything. My led doesn't appears after anything. I tried a lot of blankflash files, but none of them worked for me, since those files were for users who were in 7.0(I guess), so i literally need your help guys, what to do? will Motorola release blankflash for us? I want my phone back, i use it all the time, I don't know what to do, i'm almost crying for this lost.
Please help me!
I've searched on the forum, but nothing worked.
IM IN PANIC OMG!
Click to expand...
Click to collapse
location/country?
what firmware have you been using?
RSD lite?

KrisM22 said:
location/country?
what firmware have you been using?
RSD lite?
Click to expand...
Click to collapse
I'm from Brazil, so channel retbr
I was using latest version of 7.1.1 (NPNS26.118-22-12)
RSD Lite i was using the 6.2.4 version
Remember that I downgraded to 6.0.1 and upgrde through OTA to 7.0, with that OTA my phone gt bricked.
I can't reboot into bootloader to flash anything, that's why I want the blankflash
Edit. As I want my device ASAP, I've gone to a assistance. He said he was gonna send my device to another city to their software team. If they get the problem and solve it, I'll just pay 80 reais(my currency), if not, i don't pay anything.
What do you think? Do you think it's possible to fix it without changing the motherboard? And about the board, do you think that it's worth it changing it?

xdaVTU said:
I'm from Brazil, so channel retbr
I was using latest version of 7.1.1 (NPNS26.118-22-12)
RSD Lite i was using the 6.2.4 version
Remember that I downgraded to 6.0.1 and upgrde through OTA to 7.0, with that OTA my phone gt bricked.
I can't reboot into bootloader to flash anything, that's why I want the blankflash
Edit. As I want my device ASAP, I've gone to a assistance. He said he was gonna send my device to another city to their software team. If they get the problem and solve it, I'll just pay 80 reais(my currency), if not, i don't pay anything.
What do you think? Do you think it's possible to fix it without changing the motherboard? And about the board, do you think that it's worth it changing it?
Click to expand...
Click to collapse
follow what @ Ax1qwer said above, or change it. Never download to MM.

Ax1qwer said:
follow : https://forum.xda-developers.com/moto-z-play/how-to/guide-unbrick-moto-z-play-t3618492
and you should attach error log from blankflash.
Click to expand...
Click to collapse
i'm not able to download his file, i get error 401 when i click the link.
Anyway, my phone is with the assistance now, tuesday i'll get it back either they fixed it or not, but i hope they solve it...
I downloaded others blankflashes.bat but all of them didn't work, i got this everytime(attached)
The attached file is just one of the logs i got, i tried others files, but I deleted them... sorry

[G930U] FEB-2019 - Official Stock Firmware OREO for Unlocked S7 (G930UUEU9CSA3)

[Info]
Make sure to flash with Odin3 v3.13.1.
I'd tried 3.12.x and had no luck. :silly:
Was able to flash my S7 from Verizon to unlocked with this.
Flashing with HOME_CSC will wipe your phone, only do this if you want a clean install.
The non-home CSC should leave all the user files untouched.
I've uploaded this because updato was miserably slow,
just don't want others to jump through as many hoops as I did to get it.
Good luck and thanks for stopping by! :fingers-crossed:
[Files]
3gb - G930UUEU9CSA3 Google Drive Link
3mb - Odin 3.13.1 Google Drive Link
[Contents of firmware zip]
AP_G930UUEU9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G930UUEU9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930UUEU9CSA3_CP11792902_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_OYM_G930UOYM9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OYM_G930UOYM9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5

sm g930u v9 bootloader
just wondering if somone could try to make a way for the v9 bootloader now eng boot ?hopefully someone fiqures it out cause im stuck at this point everything fails for me when trying to put on a custom recovery

Nelson456 said:
just wondering if somone could try to make a way for the v9 bootloader now eng boot ?hopefully someone fiqures it out cause im stuck at this point everything fails for me when trying to put on a custom recovery
Click to expand...
Click to collapse
can someone please check this out if their is a downgrade method etc boot recovery for v9 i would appreciate it this is insane i regret when i hit the ota update button

SethGandy said:
[Info]
Make sure to flash with Odin3 v3.13.1.
I'd tried 3.12.x and had no luck. :silly:
Was able to flash my S7 from Verizon to unlocked with this.
Flashing with HOME_CSC will wipe your phone, only do this if you want a clean install.
The non-home CSC should leave all the user files untouched.
I've uploaded this because updato was miserably slow,
just don't want others to jump through as many hoops as I did to get it.
Good luck and thanks for stopping by! :fingers-crossed:
[Files]
3gb - G930UUEU9CSA3 Google Drive Link
3mb - Odin 3.13.1 Google Drive Link
[Contents of firmware zip]
AP_G930UUEU9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G930UUEU9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930UUEU9CSA3_CP11792902_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_OYM_G930UOYM9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OYM_G930UOYM9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
Click to expand...
Click to collapse
It has worked for me, thank you very much.
.Details of my Galaxy s7:
-G930P
-Had the February 2019 update, Bootloader v9.
Thank you and luck to others.:laugh:

Can I flash this firmware on a G930a unlocked S7??

Neoguto said:
Can I flash this firmware on a G930a unlocked S7??
Click to expand...
Click to collapse
Should work just fine

Nice work...
Installed this with all tools in thread. Appears to take the image, updates Android to 32% then shows "Erasing". Reboots, says something about rebooting for Sim Updates, does this for a few mins. Then updates Android apps and boom, new stock phone no provider junk on it. Very nice. If I find any issues after the phone setup, I will post update, but if nothing, appears this is now a Stock unlocked phone.
Phone - SM-930P Sprint
Had most recent April Update
No longer on sprint, it's on GoogleFi now, but was unlocked by provider

Is this rootable or did I just take my Marshmellow S7 and destroy it's rootability??? FML why oh why didn't I ask this before doing it...

Hi i have one s7..i want to change to a new rom.whi h rom is better for gaming??(oreo,nougat,marshmalow ,kitkat).ty

Ap958571 said:
Hi i have one s7..i want to change to a new rom.whi h rom is better for gaming??(oreo,nougat,marshmalow ,kitkat).ty
Click to expand...
Click to collapse
I'd say oreo, the newer the better for the sake of actually being able to obtain the apks from the google play store.
I was able to run most games just fine with this rom. :good:

Is this specifically for TMobile users? It's just that i noticed it was TMB-$(version_info).
I guess my question is, does it matter if i use this on a Straight Talk phone, or should i suck it up and spend a day downloading the VMU rom from SAMMOBILE?
More specificity, if it matters. Previously i upgraded from stock Straight Talk rom that came with the phone to VMU, with the SM-G930U firmware. I'm looking to upgrade from Nougat to Oreo now though.
Currently my phone is running VMU-G930UUES4CRG3-20180809155130

SethGandy said:
Should work just fine
Click to expand...
Click to collapse
probably a dumb noob question, but do i have to request a carrier unlock on a 930A before i do this? it is currently carrier locked.
also, after doing whatever is required, will it get OTA unlocked updates?
EDIT: i went ahead and got my s7 unlocked with the ATT code. on trying to flash i got an SHA256 error. after some google i checked the bootloader is "8". is this why? update checker says i'm up to date with Dec 3 2018 security updates...

I'm sorry but is these Snapdragon S7 variants likely to have a Android 9 Rom in the future?
I know it's idiotic btw hope some responses would be left.

SethGandy said:
Flashing with HOME_CSC will wipe your phone, only do this if you want a clean install.
The non-home CSC should leave all the user files untouched.
Click to expand...
Click to collapse
This is the first time I've done this and other guides seems to say the opposite. Can someone confirm which I should use if I don't want to do a clean install?
Thanks

Will WiFi calling still work after installing this on a T-Mobile S7? Thank You.

SethGandy said:
[Info]
Make sure to flash with Odin3 v3.13.1.
I'd tried 3.12.x and had no luck. :silly:
Was able to flash my S7 from Verizon to unlocked with this.
Flashing with HOME_CSC will wipe your phone, only do this if you want a clean install.
The non-home CSC should leave all the user files untouched.
I've uploaded this because updato was miserably slow,
just don't want others to jump through as many hoops as I did to get it.
Good luck and thanks for stopping by! :fingers-crossed:
[Contents of firmware zip]
AP_G930UUEU9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G930UUEU9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930UUEU9CSA3_CP11792902_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_OYM_G930UOYM9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OYM_G930UOYM9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
Click to expand...
Click to collapse
Hi, im newbie here
I have g930v G930VVRU4API3 , an its alredy unlocked
I want update it to oreo, can i use this firmware??
Thx

kdkhimura said:
Hi, im newbie here
I have g930v G930VVRU4API3 , an its alredy unlocked
I want update it to oreo, can i use this firmware??
Thx
Click to expand...
Click to collapse
I have the same setup and it worked for me.

whatubeggin said:
I have the same setup and it worked for me.
Click to expand...
Click to collapse
any problem after u update ur phone??

change the samsung s7 logo at startup
Hello, I'm French I do not speak English well. I am looking for someone who can help me change the logo Samsung S7 powered by android at boot time.
Thanks in advance.

Bring aosp 9 plis