Related
After taking the APH1 update on my phone, I can no longer downgrade to PG5, and I also can't flash the PG9 U firmware. I don't know what Samsung/Verizon did, but it's ridiculous.
I'm now stuck on the APH1 firmware and can't get on the U firmware at all.
I haven't tried rooting, but there is no Odin firmware for APH1 yet, so I'm not going to try until there is, so that if I mess up my phone I can fix it.
FoxyDrew said:
After taking the APH1 update on my phone, I can no longer downgrade to PG5, and I also can't flash the PG9 U firmware. I don't know what Samsung/Verizon did, but it's ridiculous.
I'm now stuck on the APH1 firmware and can't get on the U firmware at all.
I haven't tried rooting, but there is no Odin firmware for APH1 yet, so I'm not going to try until there is, so that if I mess up my phone I can fix it.
Click to expand...
Click to collapse
It probably incremented the bootloader. I upgraded to it because I am just losing interest in root all together. Somebody will chime in with a more technical explanation.
DarkMidnight said:
It probably incremented the bootloader. I upgraded to it because I am just losing interest in root all together. Somebody will chime in with a more technical explanation.
Click to expand...
Click to collapse
Agreed. For some reason I just don't really care about rooting the S7. Maybe I've just rooted too many phones and lost interest.
nynativ said:
Agreed. For some reason I just don't really care about rooting the S7. Maybe I've just rooted too many phones and lost interest.
Click to expand...
Click to collapse
For me a lot of it is this is not the most conventional root, not very stable for me and battery life suffered a lot compared to stock, and flashing U firmware has not been very cooperative for me.
So thoughts.... I am on the latest U firmware on my 930V. Should I consider flashing back to the stock Verizon rom? Everything is working great. I do plan on jumping ship from Verizon in the next year or so. I am blown away at how well this phone runs stock and only flashed the U in preparation to take it to another carrier afterwards. Is this a bad idea?
Tried to live with root, but the battery and stability was horrible. Now, I am using the engboot to do any data back up or restore tasks in TiBU then flashing the AP again to unroot. Data is maintained, but now I have to live with ads. I use adguard, by it feel like it hurts battery life. Will try and quantify that soon.
Being able to count on my phone to make a call and hold a charge is too important to me. Rooting the phone to set it up after a reset saves me time. Unfortunately, rooting with our current method is too prohibitive for daily use.
nynativ said:
Agreed. For some reason I just don't really care about rooting the S7. Maybe I've just rooted too many phones and lost interest.
Click to expand...
Click to collapse
Same here.
I have a 930U that I use on Verizon. I use the 930V firmware because I like having visual Voicemail. I have rooted 3 different times and gone back to stock everytime. I suppose it because of the engineering kernel but root with the S7 is just not stable. The battery life sucks and you have to do so many things to fix the lag it has just become not worth it. Also the 2 latest updates from Verizon have been good on battery. I do like not having Verizon logos all over my phone.
nrage23 said:
I have a 930U that I use on Verizon. I use the 930V firmware because I like having visual Voicemail. I have rooted 3 different times and gone back to stock everytime. I suppose it because of the engineering kernel but root with the S7 is just not stable. The battery life sucks and you have to do so many things to fix the lag it has just become not worth it. Also the 2 latest updates from Verizon have been good on battery. I do like not having Verizon logos all over my phone.
Click to expand...
Click to collapse
Give stang5liter rom a whirl. Been on it since it was released and have no issues besides nearby devices not working for me.
craazy82013 said:
Give stang5liter rom a whirl. Been on it since it was released and have no issues besides nearby devices not working for me.
Click to expand...
Click to collapse
Been using the same ROM for almost a week with xposed and everything is fine. I feel great without seeing the ads again. haha! BTW, I didn't try the nearby devices so no comment on that.
I have the G930V and am running APH1 with root no problems. The lag was horrendous but after changing the CPU governor to "interactive" on BOTH CPU's (little and BIG) it's been running smooth. I'll run like this for a bit... but stang5liter looks like it will be my next move.
Has anyone with ph1 tried flashing another rom such as stang5litre?
dBunny said:
I have the G930V and am running APH1 with root no problems. The lag was horrendous but after changing the CPU governor to "interactive" on BOTH CPU's (little and BIG) it's been running smooth. I'll run like this for a bit... but stang5liter looks like it will be my next move.
Click to expand...
Click to collapse
So how did you root if you can't downgrade like the OP stated?
craazy82013 said:
Has anyone with ph1 tried flashing another rom such as stang5litre?
Click to expand...
Click to collapse
Yes it works just fine.
bart77 said:
So how did you root if you can't downgrade like the OP stated?
Click to expand...
Click to collapse
PH1 doesn't break root. You just can't downgrade to older firmware's or flash any U firmware's. PH1 is still completely rootable.
So you can't Odin flash back to a stock image if you get in trouble or want to unroot. I guess I'll stay on PG5 for now.
I'm not rooted now, but was able to disable system update notifications using
https://play.google.com/store/apps/details?id=com.hecorat.packagedisabler
By disabling:
System updates (com.samsung.sdm)
System updates (com.samsung.sdmviewer)
and securitylogagent
FoxyDrew said:
PH1 doesn't break root. You just can't downgrade to older firmware's or flash any U firmware's. PH1 is still completely rootable.
Click to expand...
Click to collapse
Thanks @FoxyDrew for clarifying that... and I agree.
I used the following GUIDE to root APH1 on my S7 Flat: http://forum.xda-developers.com/verizon-s7-edge/how-to/verizon-root-knox-t3410624
Im somewhat confused. Your saying you cant downgrade from ph1. Are you talking only with odin? Reason i ask is stang5litre rom is APE1. And as was stated a few posts up, this rom can be flashed on rooted APH1. Which would take you back to APE1. Therefor downgradable? Any help is appreciated.
craazy82013 said:
Im somewhat confused. Your saying you cant downgrade from ph1. Are you talking only with odin? Reason i ask is stang5litre rom is APE1. And as was stated a few posts up, this rom can be flashed on rooted APH1. Which would take you back to APE1. Therefor downgradable? Any help is appreciated.
Click to expand...
Click to collapse
Ph1 upgrades the boot image therefore you cannot Odin flash back to stock pe1 which is the older boot image.
You can still root and flash stang5litre which is the pe1 rom, but you still have the ph1 boot image.
Sent from my VS987 using XDA-Developers mobile app
bart77 said:
Ph1 upgrades the boot image therefore you cannot Odin flash back to stock pe1 which is the older boot image.
You can still root and flash stang5litre which is the pe1 rom, but you still have the ph1 boot image. So if something goes wrong, you have no means of recovery back to stock since there is no ph1 stock Odin image.
Sent from my VS987 using XDA-Developers mobile app
Click to expand...
Click to collapse
The ph1 image is available at this link (http://updato.com/firmware-archive-select-model?record=78F84FCD811E11E69B2DFA163EE8F90B). I have flashed with these files and they work perfect.
Seems bootloader was uograded to version 3. So may be possible to flash between tmo and vzw and vice versa. Both now have v3 bootloader.
Hi if anyone can help- I'm on the Verizon Samsung Galaxy Note 4 after 2 Note 7's and a Note 3 before that on Biggin's so I've sorta been out of the root game. I want to downgrade from 6.0.1 to 5.1.1. I am downloading the full firmware for the Note 4 from further back in this thread (N910VVRU2CPA1) and am currently on (N910VVRU2CPG2).
From what I understand, I need to do a factory reset, then go to Odin and flash the firmware. I have Odin 3.10.7 and am downloading the N910VVRU2CPA1 as we speak. I see 'hsbadr' firmwares in his thread and the PIT file TRLTE_USA_VZW.pit which I'm not sure is compatable pit file for the specific 5.1.1 firmware or the necessary pit file is included in the full firmware and can anyone tell me if these are the right steps?are these the right steps Any information would be greatly appreciated,
Thanks
@tjmethod by chance how did you process go, did you manage to root and unlock bootloader?
djisback said:
@tjmethod by chance how did you process go, did you manage to root and unlock bootloader?
Click to expand...
Click to collapse
I bought the phone already with 6.0.1 on it and read that you cannot unlock/ root it with mm on it and can only be done after downgrading to 5.1.1 so I haven't done anything yet
I'm in the same boat...Coming from a n7. Bought a n4 on eBay...It's got 601. Want to root...Guess we need to downgrade....Is it possible?
tjmethod said:
Hi if anyone can help- I'm on the Verizon Samsung Galaxy Note 4 after 2 Note 7's and a Note 3 before that on Biggin's so I've sorta been out of the root game. I want to downgrade from 6.0.1 to 5.1.1. I am downloading the full firmware for the Note 4 from further back in this thread (N910VVRU2CPA1) and am currently on (N910VVRU2CPG2).
From what I understand, I need to do a factory reset, then go to Odin and flash the firmware. I have Odin 3.10.7 and am downloading the N910VVRU2CPA1 as we speak. I see 'hsbadr' firmwares in his thread and the PIT file TRLTE_USA_VZW.pit which I'm not sure is compatable pit file for the specific 5.1.1 firmware or the necessary pit file is included in the full firmware and can anyone tell me if these are the right steps?are these the right steps Any information would be greatly appreciated,
Thanks
Click to expand...
Click to collapse
sudermatt said:
I'm in the same boat...Coming from a n7. Bought a n4 on eBay...It's got 601. Want to root...Guess we need to downgrade....Is it possible?
Click to expand...
Click to collapse
Before you can start rooting, you'll need to be on 5.1.1 BPA1. If you're currently on 6.0.1, just download the BPA1 firmware from Sammobile, factory reset on 6.0.1, then flash BPA1 stock via Odin.
quinciebee said:
Before you can start rooting, you'll need to be on 5.1.1 BPA1. If you're currently on 6.0.1, just download the BPA1 firmware from Sammobile, factory reset on 6.0.1, then flash BPA1 stock via Odin.
Click to expand...
Click to collapse
Hi thanks, I had called Samsung and talked to top tier tech support and was told that once the phone has been upgraded to 6.0.1., it cannot be downgraded. and that i need to search the rooting sites and try to find where someone has found a breach or workaround for unlocking the bootloader which will usually have a bounty but I dont know. top tier tech support has always been good. Do you think thats false it cannot be downgraded?
tjmethod said:
Hi thanks, I had called Samsung and talked to top tier tech support and was told that once the phone has been upgraded to 6.0.1., it cannot be downgraded. and that i need to search the rooting sites and try to find where someone has found a breach or workaround for unlocking the bootloader which will usually have a bounty but I dont know. top tier tech support has always been good. Do you think thats false it cannot be downgraded?
Click to expand...
Click to collapse
It's definitely false, when I rooted my phone, I downgraded from 6.0.1 to 5.1.1 without any issues.
quinciebee said:
It's definitely false, when I rooted my phone, I downgraded from 6.0.1 to 5.1.1 without any issues.
Click to expand...
Click to collapse
I will definately give it a go when I have the time, have you flashed a rom and if so which one, there must be some or some tweaks to get rid of the lag?
tjmethod said:
I will definately give it a go when I have the time, have you flashed a rom and if so which one, there must be some or some tweaks to get rid of the lag?
Click to expand...
Click to collapse
I'm currently using CM13 because of Xposed and overall stability, but there are newer roms out there.
quinciebee said:
I'm currently using CM13 because of Xposed and overall stability, but there are newer roms out there.
Click to expand...
Click to collapse
I am a little confused as to whether I've found the right firmwares but I've found the firmwares here:
https://forum.xda-developers.com/no...mware-firmware-kernel-modem-recovery-t2942937
If I am downgrading to 5.1.1. which this phone was obviously on before, I don't know what this phone was on since it currently is on the PL1 build which are not one of the two 6.0.1. builds on this page. I don't even know if that matters.. Anyway, the two 5.1.1. builds are PA1 and OK3. Do you know where any other firmwares out there that might show my current one and the previous build that it came from?
Thanks-
tjmethod said:
I am a little confused as to whether I've found the right firmwares but I've found the firmwares here:
https://forum.xda-developers.com/no...mware-firmware-kernel-modem-recovery-t2942937
If I am downgrading to 5.1.1. which this phone was obviously on before, I don't know what this phone was on since it currently is on the PL1 build which are not one of the two 6.0.1. builds on this page. I don't even know if that matters.. Anyway, the two 5.1.1. builds are PA1 and OK3. Do you know where any other firmwares out there that might show my current one and the previous build that it came from?
Thanks-
Click to expand...
Click to collapse
You want the PA1. It's really easy. Just sounds more complicated then it is. I am using the PaulPizz rom. It is very stable, good battery life, and spen and sview work. If you need any help, let me know.
ziggy71 said:
You want the PA1. It's really easy. Just sounds more complicated then it is. I am using the PaulPizz rom. It is very stable, good battery life, and spen and sview work. If you need any help, let me know.
Click to expand...
Click to collapse
Thanks bro I don't if I'll have time til this weekend to do this- Does this rom have tweaks to fix the aggravating galaxy lag? With a non rooted phone there's goin into recovery and deleting cache, DU speed and phone booster, cleaned but it's like they all have it- thanks again- lookin forward to rooting this damn thing
tjmethod said:
I am a little confused as to whether I've found the right firmwares but I've found the firmwares here:
https://forum.xda-developers.com/no...mware-firmware-kernel-modem-recovery-t2942937
If I am downgrading to 5.1.1. which this phone was obviously on before, I don't know what this phone was on since it currently is on the PL1 build which are not one of the two 6.0.1. builds on this page. I don't even know if that matters.. Anyway, the two 5.1.1. builds are PA1 and OK3. Do you know where any other firmwares out there that might show my current one and the previous build that it came from?
Thanks-
Click to expand...
Click to collapse
Yeah they're out there but that thread hasn't been updated recently. Basically the order after pf3 is pg2, pj2, and then cpl1. The one you want, if your planning on rooting, is bpa1. Also, as far as your question in the op about the pit file, it should really only be used if absolutely necessary. It's in case your partitions have been corrupted for some reason and you need to repartition your device.
Edit- I was going to link to those other firmwares but they are buried in the thread that your already looking in. Either way they aren't necessary for you to unlock your bootloader, you can go straight from cpl1 to bpa1.
kevintm78 said:
Yeah they're out there but that thread hasn't been updated recently. Basically the order after pf3 is pg2, pj2, and then cpl1. The one you want, if your planning on rooting, is bpa1. Also, as far as your question in the op about the pit file, it should really only be used if absolutely necessary. It's in case your partitions have been corrupted for some reason and you need to repartition your device.
Edit- I was going to link to those other firmwares but they are buried in the thread that your already looking in. Either way they aren't necessary for you to unlock your bootloader, you can go straight from cpl1 to bpa1.
Click to expand...
Click to collapse
Hey thanks for confirming all this. So all I need to download and install is the bpa1 firmware via Oden with the AP button I think- I've got a few different versions of Oden on my pc. It's been a while since I've flashed firmware on a phone but I remember it was easy. So just save my pictures, any files, etc. on the sd card, remove it, then do a factory reset or when I put the setting into usb download mode, and flash the firmware this will automatically factory reset the phone? Also earlier today Verizon has been trying to push an software upgrade. After I unlock the bootloader and install twrp then flash a rom, do I need to somehow disable the update notice. I remember having to do that once with another phone.
What rom are you on? Thanks again for the Info-
TJ
tjmethod said:
Hey thanks for confirming all this. So all I need to download and install is the bpa1 firmware via Oden with the AP button I think- I've got a few different versions of Oden on my pc. It's been a while since I've flashed firmware on a phone but I remember it was easy. So just save my pictures, any files, etc. on the sd card, remove it, then do a factory reset or when I put the setting into usb download mode, and flash the firmware this will automatically factory reset the phone? Also earlier today Verizon has been trying to push an software upgrade. After I unlock the bootloader and install twrp then flash a rom, do I need to somehow disable the update notice. I remember having to do that once with another phone.
What rom are you on? Thanks again for the Info-
TJ
Click to expand...
Click to collapse
Yeah that all sounds spot on. I would definitely do the factory reset before you start, but other than that your good. To block the updates, you can uninstall the SDM apps. There are 2 of those and you'll need root to remove them, but you can disable them without root with that debloater tool. The rom I'm currently using is kind of work in progress. I have a couple stock based roms in the dev section, one is stock_plus that has a stock feel with some mods added and the other is Modest Rom that is got some grace apps added and system ui mods. You can find them here and here if you want to check them out.
kevintm78 said:
Yeah that all sounds spot on. I would definitely do the factory reset before you start, but other than that your good. To block the updates, you can uninstall the SDM apps. There are 2 of those and you'll need root to remove them, but you can disable them without root with that debloater tool. The rom I'm currently using is kind of work in progress. I have a couple stock based roms in the dev section, one is stock_plus that has a stock feel with some mods added and the other is Modest Rom that is got some grace apps added and system ui mods. You can find them here and here if you want to check them out.
Click to expand...
Click to collapse
Awesome, I'm going to check those out but I forgot the biggest question of all... how to get rid of the Galaxy lag- is there a rom or tweak where this can be fixed since recovery cache delete and cleaning tools dont really do much?
Thanks again-
tjmethod said:
Awesome, I'm going to check those out but I forgot the biggest question of all... how to get rid of the Galaxy lag- is there a rom or tweak where this can be fixed since recovery cache delete and cleaning tools dont really do much?
Thanks again-
Click to expand...
Click to collapse
Custom kernels help a lot. The problem is it's kind of slim pickings for our specific model, but some of the international kernels work well too. Oscar kernel is made for the 910v so that's probably the most reliable but if your like me, I like to use a permissive kernel and Ram kernel is not a bad choice for that though it's not as feature rich.
kevintm78 said:
Custom kernels help a lot. The problem is it's kind of slim pickings for our specific model, but some of the international kernels work well too. Oscar kernel is made for the 910v so that's probably the most reliable but if your like me, I like to use a permissive kernel and Ram kernel is not a bad choice for that though it's not as feature rich.
Click to expand...
Click to collapse
I really dont know the difference... from what I remember a kernel is the layer between the software and the hardware- a key component of the os. I'm guessing the permissive ones can be used for different roms or firmware? You can probably tell I really don't that much about the root game. The last time I flashed a firmware was on my note 3 after I bricked it. Then rerooted and got on to biggins rom which was great ut I never understood or learned how to use xposed. Anyway, I downloaded Modest Rom, PJ2 _STOCK .tar and am downloading cpl1_tar but I know that once I flash bpa1 firmware which puts the phone back on 5.1.1. I see your roms are 6.0.1 roms, after I flash the bpa1, will the bootloader be unlocked? If so can I then just flash the cpla1_tar or is that not a full firmware? or use one of the two 6.0.1 firmwares from where I found the cpa1? Are the kernels different from 6.0.1 and 5.1.1 and where to find the downloads?? I appreciate the tips especially coming from a develpoer and i'm happy to make a donation- I'm not sure how?
Thanks again!
tjmethod said:
I really dont know the difference... from what I remember a kernel is the layer between the software and the hardware- a key component of the os. I'm guessing the permissive ones can be used for different roms or firmware? You can probably tell I really don't that much about the root game. The last time I flashed a firmware was on my note 3 after I bricked it. Then rerooted and got on to biggins rom which was great ut I never understood or learned how to use xposed. Anyway, I downloaded Modest Rom, PJ2 _STOCK .tar and am downloading cpl1_tar but I know that once I flash bpa1 firmware which puts the phone back on 5.1.1. I see your roms are 6.0.1 roms, after I flash the bpa1, will the bootloader be unlocked? If so can I then just flash the cpla1_tar or is that not a full firmware? or use one of the two 6.0.1 firmwares from where I found the cpa1? Are the kernels different from 6.0.1 and 5.1.1 and where to find the downloads?? I appreciate the tips especially coming from a develpoer and i'm happy to make a donation- I'm not sure how?
Thanks again!
Click to expand...
Click to collapse
Hey buddy, did you get it figured out? I broke my arm at work on Sunday and of course it's my right arm so I'm having some issues responding back on my note with one hand. I bet I've dropped this thing 20 times already.
kevintm78 said:
Hey buddy, did you get it figured out? I broke my arm at work on Sunday and of course it's my right arm so I'm having some issues responding back on my note with one hand. I bet I've dropped this thing 20 times already.
Click to expand...
Click to collapse
Oh man that sucks- hopefully they gave you some good pain meds. Anyway, I havent taken th plunge yet- once I get on to 5.1.1 then twrp, I want to go on to 6.0.1 but am unsure as to what point the bootloader is unlocked or exactly what to do to upgrade to 6.0.1 once I crack the bl. I just dont want to go through the dreaded set up everything twice.
Hi,
I was reading the threads about upgrading / unlocking the bootloaders.
After spending almost half day rooting and rerooting, I have a few questions.
Right now I am on BPA1, rooted, stock. In order to install an Marshmallow ROM, it looks like I have to upgrade the bootloader, to minimum CPD1. Here it gets confusing. I already changed the CID to developer and the bootloader is unlocked. If I try to upgrade:
1. Can I flash just the bootloader (and eventually the modem) and not the entire stock firmware?
2. Will I lose root? If yes, I have to reroot, but the rooting tools are kind on unreliable, spent a lot of time already, no guarantee they will work again...In order to push the files for bootloader unlock, root is required. Is there a way to keep root? Flashing the stock firmware seems to lock the bootloader and eliminate root, so every time something needs to be upgraded, we have to go through the same process?
3. At this point, it looks that there are so many updates: CPD, CPF, CPG, CPJ, that I need a CPR if I have to repeat the process 4 times! Some roms don't require the latest update, but if it installed, will it work? E.g. the rom requires CPF and I upgrade to CPJ, what happens?
Thanks!
razvu said:
Hi,
I was reading the threads about upgrading / unlocking the bootloaders.
After spending almost half day rooting and rerooting, I have a few questions.
Right now I am on BPA1, rooted, stock. In order to install an Marshmallow ROM, it looks like I have to upgrade the bootloader, to minimum CPD1. Here it gets confusing. I already changed the CID to developer and the bootloader is unlocked. If I try to upgrade:
1. Can I flash just the bootloader (and eventually the modem) and not the entire stock firmware?
2. Will I lose root? If yes, I have to reroot, but the rooting tools are kind on unreliable, spent a lot of time already, no guarantee they will work again...In order to push the files for bootloader unlock, root is required. Is there a way to keep root? Flashing the stock firmware seems to lock the bootloader and eliminate root, so every time something needs to be upgraded, we have to go through the same process?
3. At this point, it looks that there are so many updates: CPD, CPF, CPG, CPJ, that I need a CPR if I have to repeat the process 4 times! Some roms don't require the latest update, but if it installed, will it work? E.g. the rom requires CPF and I upgrade to CPJ, what happens?
Thanks!
Click to expand...
Click to collapse
Yeah it definitely gets a little confusing, but I might be able to clear up a few of your questions. The bootloader you want to upgrade to is the cpd1 version, after that the only things that change when you upgrade to pf3, pg2, and pj1 are the kernels and modems. Right now I'm using the latest pj1 firmware and my bootloader has never changed from cpd1 and flashed between the different versions several times and for unlocking the bootloader on 6.0 you do have to repeat the process you did for lp, unfortunately.
kevintm78 said:
Yeah it definitely gets a little confusing, but I might be able to clear up a few of your questions. The bootloader you want to upgrade to is the cpd1 version, after that the only things that change when you upgrade to pf3, pg2, and pj1 are the kernels and modems. Right now I'm using the latest pj1 firmware and my bootloader has never changed from cpd1 and flashed between the different versions several times and for unlocking the bootloader on 6.0 you do have to repeat the process you did for lp, unfortunately.
Click to expand...
Click to collapse
OK, so what file do I need to download and flash? I have to unloack the CPD1 bootloader and reroot? Which app? Kingroot or Kingoroot?
Once this is updated, how can I upgrade the modems and kernels, can I flash them individually?
Thanks!
razvu said:
OK, so what file do I need to download and flash? I have to unloack the CPD1 bootloader and reroot? Which app? Kingroot or Kingoroot?
Once this is updated, how can I upgrade the modems and kernels, can I flash them individually?
Thanks!
Click to expand...
Click to collapse
These are excellent questions that I'm sure a lot of members are thinking, but just haven't formally asked.
I have a Developer Device that I got directly from a Samsung 2 years ago. When hsbadr put out CM 14.1, I was still on Android 5.1.1. It seemed like a daunting task to do all that was required to get to CM 14.1, but I went ahead with it. I decided that it just made more sense to have my device CID changed to the one that everyone else was on, so I went through all the motions. Yes, the root thing was very touchy. But it really wasn't all that bad.
I'm now on bootloader CPD1, and just today upgraded the baseband by odin flashing the partial firmware for CPJ2 baseband.
Can't wait for hsbadr's next build!!!!
Ok, so in conclusion, which file needs to be flashed to upgrade to CPD1? Is it a stock tar, or the bootloader can be flashed just by itself? After flashing I'm gonna lose root again and have to start over before changing the CID?
You mentioned that you have a developer edition. I have one developer and one retail. My developer is still on an older Jasmine, but it needs to sent for repair. I'm trying to get the retail one done, so I can use it in the meantime. Then, the plan is to get the same thing done on the developer edition. I was hoping that would be easier, as the bootloader is unlocked, but apparently that's not the case.
Sent from my SM-N910V using XDA Free mobile app
Nobody can recommend the right file to flash?
Sent from my SM-N910V using XDA Free mobile app
I am also looking for advice on how to upgrade the bootloader. I am on BPA1 currently but everything I find keeps upgrading everything but the bootloader.
Thanks in advance for any help you can provide.
Hi, I've got this one Note 4 that's had loads of trouble presumably since the last security update.
Baseband Version: N910AUCS2EQD1
Android: 6.0.1
Have seen the instructions and all as to how to go about downgrading BUT one site I came across with the original stock firmware downloads outright state how:
""DO not ever try to downgrade from any newest Android 6.0.1 Marshmallow updates back to an older 6.0.1 build version""
'and so I'm lost. Should trying to then reinstall the same Baseband version atop what's already there a good first alternative? ...that is, just in case it was never upgraded properly in the first place? Or is that not even possible?
Is trying to downgrade at all a futile pursuit?
Would truly appreciate any suggestions, help, direction...heck, anything! Thanks in advance.
I downgraded from 6.0.1 epk5 to 5.1.1 with no problem.
Not sure about qd1.
As long as you have the odin firmware, I see no problem.
Can i downgrade note 4 n910a from marshmallow to lollilop,please help me i am in great trouble because marsmallow update is very bad with a lot of reboot issue ,battery drain.
Once you are on QD1 you will not be able to go back to anything lower than that firmware. The bootloader is now at the latest version and has blown one of those imaginary "e-fuses" so that you can not go back in time to any other vulnerable OS. I just tried today to go from EQD1 to EPK5 and It would not flash and would fail every time whilst using the latest Odin. So good luck on finding anything on getting you back to another firmware version but at this time I do not believe there is anything that will move you back to the firmware you want. If you do happen to find something or make your own exploit do tell @sanaullahkhan371 If you are on QD1 you are not going to be able to downgrade if you are on PK5 you can try the Odin downgrade method that will5 presumably used but if you are not in this firmware use case you are SOL.
will5 said:
I downgraded from 6.0.1 epk5 to 5.1.1 with no problem.
Not sure about qd1.
As long as you have the odin firmware, I see no problem.
Click to expand...
Click to collapse
Hi,
Can you please let me know how did you downgrade? Is it straight away flash to 5.1.1 or did you follow any steps?
I am also planning to downgrade. Anyways, I stopped using Note 4 after update to 6.0.1 as it was switching off every now and then due to update. Might as well make this phone usable to take photos and as a video player for my kid
Thanks
roxster said:
Hi,
Can you please let me know how did you downgrade? Is it straight away flash to 5.1.1 or did you follow any steps?
I am also planning to downgrade. Anyways, I stopped using Note 4 after update to 6.0.1 as it was switching off every now and then due to update. Might as well make this phone usable to take photos and as a video player for my kid
Thanks
Click to expand...
Click to collapse
I just odin to this firmware N910AUCU2DOI2-5.1.1 It s available somewhere on this forum.
Read how to odin if you never used it. In this case you need to unzip the file and load AP, BL, CP and CSC files on odin and flash.
Was running 6.0.1 epk5 previously.
will5 said:
I just odin to this firmware N910AUCU2DOI2-5.1.1 It s available somewhere on this forum.
Read how to odin if you never used it. In this case you need to unzip the file and load AP, BL, CP and CSC files on odin and flash.
Was running 6.0.1 epk5 previously.
Click to expand...
Click to collapse
Thanks a lot buddy! :good:
My note 4 was also running on 6.0.1 EPK5. Found the 5.1.1 firmware and followed your instructions to downgrade. My phone came back to life and is usable now.:victory:
No more switching off abruptly! I wont update anymore since all the apps which I use are working fine with current version of Android.
braindead444 said:
Once you are on QD1 you will not be able to go back to anything lower than that firmware. The bootloader is now at the latest version and has blown one of those imaginary "e-fuses" so that you can not go back in time to any other vulnerable OS. I just tried today to go from EQD1 to EPK5 and It would not flash and would fail every time whilst using the latest Odin.
Click to expand...
Click to collapse
Were you ever able to flash back to an older version from QD1? Others have said that the bootloader was not incremented in QD1.
spocko said:
Were you ever able to flash back to an older version from QD1? Others have said that the bootloader was not incremented in QD1.
Click to expand...
Click to collapse
Were you able to downgrade from EQD1 to 5.1.1? I am on EQH1 and I am not able to downgrade
somani09 said:
Were you able to downgrade from EQD1 to 5.1.1? I am on EQH1 and I am not able to downgrade
Click to expand...
Click to collapse
I'm also on EQH1. I have never tried to downgrade. I was just curious if it was possible, in case a root method was discovered that only worked on older versions. But I've just learned to live without root. EQH1 works fine for me.
I had the infamous freeze/reboot/shutdown issue with 6.0.1 and I wasn't sure if that was the issue but I downgraded to 5.1 and have fewer issues now. The phone runs just fine, except it does not reboot. You have to do a soft reset every time. But with the Wakelock app, at least it runs.
roxster said:
Thanks a lot buddy! :good:
My note 4 was also running on 6.0.1 EPK5. Found the 5.1.1 firmware and followed your instructions to downgrade. My phone came back to life and is usable now.:victory:
No more switching off abruptly! I wont update anymore since all the apps which I use are working fine with current version of Android.
Click to expand...
Click to collapse
Hi can i ask if u still have that firmware file
I had this phone rooted and unlocked when it was 5.0.1.
my brother upgraded it to 6.0.1 N910VVRU2CQF2 by mistake.
Can I root and unlock the bootloader again?
Thank you
mrme12 said:
I had this phone rooted and unlocked when it was 5.0.1.
my brother upgraded it to 6.0.1 N910VVRU2CQF2 by mistake.
Can I root and unlock the bootloader again?
Thank you
Click to expand...
Click to collapse
I personally have no clue, but from what I do know, when I upgraded from 5.1.1 to 6.0.1 or whatever it is/was, I had to do the rooting/unlocking process again. We all did. Have you even tried it? If so, are you getting any errors? I noticed that hsbadr's thread on stock ROMs isn't updated to this version, yet. You might want to wait around for someone to give you a more firm answer. I'm just giving you food for thought.
https://forum.xda-developers.com/no...mware-firmware-kernel-modem-recovery-t2942937
EDIT: Maybe this thread will help you. It's actually updated to CQI2, so "maybe" you're good to go. - https://forum.xda-developers.com/no...t/howto-bootloader-unlock-upgrade-to-t3398144