Develop Bugs

Question about rooting!

Hi,
I’m waiting for my LG G Pad 8.3 (still in the mail, should be here by the end of the week!!!) and I have a few questions about it. I plan to root it but I would like to know a few things before doing this as I’m not an expert with “rooting devices”…
1) If I root the device but not install any custom ROM or custom Recovery, will I still receive the automatic OTA update from LG? Of what I understood, if you don’t modify any “system” files, install custom ROM or Recovery, you should be able to get OTA update?
2) If I decide to install a custom ROM/Recovery and then want to go back to the stock ROM, Is it available for download? I checked (quickly) on the forum and I didn't see any link to download it (stock ROM from LG).
Thanks in advance!

PParent said:
Hi,
I’m waiting for my LG G Pad 8.3 (still in the mail, should be here by the end of the week!!!) and I have a few questions about it. I plan to root it but I would like to know a few things before doing this as I’m not an expert with “rooting devices”…
1) If I root the device but not install any custom ROM or custom Recovery, will I still receive the automatic OTA update from LG? Of what I understood, if you don’t modify any “system” files, install custom ROM or Recovery, you should be able to get OTA update?
2) If I decide to install a custom ROM/Recovery and then want to go back to the stock ROM, Is it available for download? I checked (quickly) on the forum and I didn't see any link to download it (stock ROM from LG).
Thanks in advance!
Click to expand...
Click to collapse
1)you probably can not update ota on stock rooted fw. I had asked the same question to the developer of the root method for our devices and this is what he had said:
dalingrin said:
My suggestion, if you want to keep root don't take an OTA.
If you really want to stay with stock LG then you'll want to flash updates via custom recovery. The community will take the updates from LG and make them flashable with TWRP or CWM.
Click to expand...
Click to collapse
2)in this guide http://forum.xda-developers.com/showthread.php?t=2554121 there are 2 methods to unbrick the gpad and revert back to full stock, both rom and recovery

katsika said:
1)you probably can not update ota on stock rooted fw. I had asked the same question to the developer of the root method for our devices and this is what he had said:
Click to expand...
Click to collapse
Thanks for your reply! If the update from LG will be available for download so I can flash it, this work with me! I might not keep the stock ROM too... I never had an android device from LG so I'm not sure how it look like... If there is too much bloatware (like Samsung), I won't keep it.
katsika said:
2)in this guide http://forum.xda-developers.com/showthread.php?t=2554121 there are 2 methods to unbrick the gpad and revert back to full stock, both rom and recovery
Click to expand...
Click to collapse
Just to make sure... Stock Kernel = Stock ROM? So the "LG G Pad Sock Kernel.img" is the latest version of the stock ROM from LG?

PParent said:
Thanks for your reply! If the update from LG will be available for download so I can flash it, this work with me! I might not keep the stock ROM too... I never had an android device from LG so I'm not sure how it look like... If there is too much bloatware (like Samsung), I won't keep it.
Just to make sure... Stock Kernel = Stock ROM? So the "LG G Pad Sock Kernel.img" is the latest version of the stock ROM from LG?
Click to expand...
Click to collapse
There is too much bloatware in this tablet just like the Samsung ones. In my opinion the stock rom is worthy if you want maximum stability or you need the lg apps.
No, kernel with rom are different things, google rom vs kernel. The stock kernel is for people who have flashed custom kernels and want to revert back to stock. If you look in the original android development section of these forums you ll see that there are 2 custom kernels and more custom roms available for our tablet atm.

katsika said:
There is too much bloatware in this tablet just like the Samsung ones. In my opinion the stock rom is worthy if you want maximum stability or you need the lg apps.
No, kernel with rom are different things, google rom vs kernel. The stock kernel is for people who have flashed custom kernels and want to revert back to stock. If you look in the original android development section of these forums you ll see that there are 2 custom kernels and more custom roms available for our tablet atm.
Click to expand...
Click to collapse
Thanks for the info! I'm not very familiar with this but I'm getting there! I'm reading related post/subject (rooting device) on the xda-developers forum so this help me a lot! I should receive my tablet tomorrow or Thursday so I'll test/inspect it to make sure everything is ok with it and than try to root it.
Did you root yours? Are you using a custom ROM on it?

PParent said:
Thanks for the info! I'm not very familiar with this but I'm getting there! I'm reading related post/subject (rooting device) on the xda-developers forum so this help me a lot! I should receive my tablet tomorrow or Thursday so I'll test/inspect it to make sure everything is ok with it and than try to root it.
Did you root yours? Are you using a custom ROM on it?
Click to expand...
Click to collapse
I had rooted it when dalingrin released the adb root method as I couldn't trust the kingo root method. Adaway and titanium backup are some of the top apps but these apps need root. Also you won't be able to move apps or games to SD without root. I flashed cyanogen mod 11 some days ago and I'm totally satisfied with it. The gpad became faster, with more ram available and with less battery consumption.

katsika said:
I had rooted it when dalingrin released the adb root method as I couldn't trust the kingo root method. Adaway and titanium backup are some of the top apps but these apps need root. Also you won't be able to move apps or games to SD without root. I flashed cyanogen mod 11 some days ago and I'm totally satisfied with it. The gpad became faster, with more ram available and with less battery consumption.
Click to expand...
Click to collapse
I'll use the root method of dalingrin then! I installed CM on my old device and I liked it so I might test it on my G Pad! There is no big issues with it? I know that it still in "Nightlies status so it might not be "stable". I'm looking forward to receive my G Pad!

PParent said:
I'll use the root method of dalingrin then! I installed CM on my old device and I liked it so I might test it on my G Pad! There is no big issues with it? I know that it still in "Nightlies status so it might not be "stable". I'm looking forward to receive my G Pad!
Click to expand...
Click to collapse
CM runs stable on G Pad as of now. Very few features are lacking and you can check the CM thread nad if you have half an hour to spare you can go through the change log as well.
For the love of God, do not mistake a rom for a kernel. And remember that a kernel is usually made for a specific ROM. Kernels will improve performance on specific ROM's.. And enable new features under the hood and so on. But if you install a stock kernel onto a CM rom, it would be like filling a car with the wrong fuel and it would most likely get stuck in bootloop until you reflash a compatible kernel. - As stated above there are 2 custom kernels, one is ported for a few of the custom roms.. The other one as far as I know is pretty empty atm. and is aiming at becoming Play Edition-"like", I don't remember for what ROM. On certain mainstream devices you will find many a kernel and usually something that will suit your needs. Perhaps this will happen with the G Pad at some point.
Good luck on your rooting adventures and feel free to ask anything if you hit a wall at some point.

I received my G Pad yesterday! I rooted it by using the “dalingrin” method, installed TWRP and then CM11 (the stock ROM had too much bloatware for me!). Everything worked without any issue so now I can enjoy my new toys! I was hesitating between the Nexus 7 and the G Pad and I’m very happy that I chose the G Pad!
Thanks again for your replies/help guys!

PParent said:
I received my G Pad yesterday! I rooted it by using the “dalingrin” method, installed TWRP and then CM11 (the stock ROM had too much bloatware for me!). Everything worked without any issue so now I can enjoy my new toys! I was hesitating between the Nexus 7 and the G Pad and I’m very happy that I chose the G Pad!
Thanks again for your replies/help guys!
Click to expand...
Click to collapse
I told you that it has too much bloatware, you did the right thing! I was also balancing between nexus 7 fhd and gpad and i picked the gpad for its 8.3" screen.

[Q] Optimus UI - Removal?

Just saw the leaked screenshots of Android L on the LG G3. Really dissapointed in the fact that you can barely tell the difference since the home screen, again, is filled with all the LG theming like Optimus UI. I was just wondering, is it possible to install Android on the device without all that? Like, near stock Android. Same goes for KitKat, is it possible?

When the bump tool is released probably. Until then depending what variant you are on no.

im on d855, im rooted but havent gone all out with customization

csassine1 said:
im on d855, im rooted but havent gone all out with customization
Click to expand...
Click to collapse
I've got a d855 as well. There is a few non LG roms to try, I'm using liquid smooth at the minute and love it.

p70shooter said:
I've got a d855 as well. There is a few non LG roms to try, I'm using liquid smooth at the minute and love it.
Click to expand...
Click to collapse
link me it please? and if possible a how to? not the smartest with this stuff

csassine1 said:
im on d855, im rooted but havent gone all out with customization
Click to expand...
Click to collapse
If your only issue is the homescreen try a different launcher
If you want a new rom, well every rom has an how to install in the op but close to stock roms are tethered so you will have to load the kernel via fatboot every time you reboot (for now) but that should also be covered in the op's of the roms

[Q] WIFI problem !! :( E980 at&t

Facing wifi problem on every custom rom I installed on my LG optimus G pro..
Working perfect on stock based roms.. Anybody know whats the issue ? Using cwm 6..0.4.7 and new phillz touch recovery to install roms but facing same problem.. When phone take first boot after installation the wifi is working but after some hours or next reboot the wifi will no more working.. Found something in build.prop
ro.wifi,channels= "blank"
I put some values of channel in it but it wont work
Plz help me..
Sorry for bad english

zohaibkhan143 said:
Facing wifi problem on every custom rom I installed on my LG optimus G pro..
Working perfect on stock based roms.. Anybody know whats the issue ? Using cwm 6..0.4.7 and new phillz touch recovery to install roms but facing same problem.. When phone take first boot after installation the wifi is working but after some hours or next reboot the wifi will no more working.. Found something in build.prop
ro.wifi,channels= "blank"
I put some values of channel in it but it wont work
Plz help me..
Sorry for bad english
Click to expand...
Click to collapse
It's not unusual for that entry in the build.prop to be blank, and shouldn't cause issues. I think the default there should be '11 11', though having it blank should be fine (pretty certain).
> Working perfect on stock based rom
Which roms are you flashing that are giving you problems? Many of the e980 roms are bugged out in various ways, maybe it's just a quirk of the one(s) you flashed? I had a similar problem recently, wifi just would *not* stay enabled, would not behave. I don't remember which rom it was though; I flash too much.
You've flashed the Kitkat 20g modem, yes? If all else flails, you could always flash back to Kitkat stock and start over, that's guaranteed to tell you whether its a hardware or software problem (if it persists after that: hardward, got to be).

help
culot said:
It's not unusual for that entry in the build.prop to be blank, and shouldn't cause issues. I think the default there should be '11 11', though having it blank should be fine (pretty certain).
> Working perfect on stock based rom
Which roms are you flashing that are giving you problems? Many of the e980 roms are bugged out in various ways, maybe it's just a quirk of the one(s) you flashed? I had a similar problem recently, wifi just would *not* stay enabled, would not behave. I don't remember which rom it was though; I flash too much.
You've flashed the Kitkat 20g modem, yes? If all else flails, you could always flash back to Kitkat stock and start over, that's guaranteed to tell you whether its a hardware or software problem (if it persists after that: hardward, got to be).
Click to expand...
Click to collapse
thanks for reply
I installed cm11 cm12 blisspop v1.0 1.1 .12 1.3 all these roms got same problem that is wifi
I m on JB 4.1.2 stock e98010p a&t
there is no wifi bugs in these custon roms.. only me facing this issue in every custom rom... Can u give me the kitkat firmware link e98020g ? I m gonna flash that rom then I will root my device on KK then I will try to flash custom roms and tell you about results.. thanks
plz provide link..
sorry for bad english

zohaibkhan143 said:
thanks for reply
I installed cm11 cm12 blisspop v1.0 1.1 .12 1.3 all these roms got same problem that is wifi
I m on JB 4.1.2 stock e98010p a&t
there is no wifi bugs in these custon roms.. only me facing this issue in every custom rom... Can u give me the kitkat firmware link e98020g ? I m gonna flash that rom then I will root my device on KK then I will try to flash custom roms and tell you about results.. thanks
plz provide link..
sorry for bad english
Click to expand...
Click to collapse
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).

help
culot said:
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
Click to expand...
Click to collapse
Ok bro thanks for helping me

zohaibkhan143 said:
Ok bro thanks for helping me
Click to expand...
Click to collapse
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?

culot said:
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
Click to expand...
Click to collapse
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?

zohaibkhan143 said:
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?
Click to expand...
Click to collapse
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.

culot said:
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
Click to expand...
Click to collapse
Thanks I will try it soon..!

culot said:
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
Click to expand...
Click to collapse
Installed sucesfully but one problem in this cwm..external_sd mounting failed cwm ver 6.0.4.4
help plz

zohaibkhan143 said:
Installed sucesfully but one problem in this cwm..external_sd mounting failed cwm ver 6.0.4.4
help plz
Click to expand...
Click to collapse
Oh, no, you misunderstood: you don't use the CWM, you only install it and then quickly install *over* it with one of Freegee's recoveries. Never use the Sphinx CWM, as you'll get errors when you go to flash roms. You only insatll the Sphinx CWM so that Freegee will recognize your device and function, it's only a stepping stone to Freegee, not a recovery you should use on its own.
And, in light of recent developments on the TWRP 2.8 front, I'd say give that a try instead. It mounts your external SD just fine. THe only things I've flashed with it are BlissPop builds and Gapps, but all without an issue yet. Go for the one with the Play theme and enjoy its gorgeous colors.

Thanks buddy.. Freegee recognized my device and installed cwm succesfully
Sent from my LG-E980 using XDA Free mobile app

help
after kitkat update now I m installed those custom roms again but still there is a same wifi problem sick off totally !

Can l flash european .kdz on korean model?

Hello, I've recently bought a LG G3 Korean model F400s . I successfully rooted, install recovery and then went for the latest build of xposed modules.
So, now that I have some "freedom", is it possible to flash an European .kdz on my device?I say European because they are similar on specs apart from the extra ram for the Korean model.
It could also be an US .kdz if it's working...anything but Korean. I would like stock .kdz in any case.
I'm willing to try anything really and not afraid to brick it.

Hi,
No, you can't flash a EU KDZ on your device.
I'll recommended to find a custom Rom suitable for your device.
I think Cloudy had an specific Rom suitable for your device.
Regards

Thanks for your reply. Could you recommend a Rom based on stock heavily. A stock Rom?

CloudyG3, SlickROM, XtraLite

Is it possible to flash one of these and then into it so that I can use my banking app?
Sent from my LG-F400S using Tapatalk

AP0ll0UK said:
Is it possible to flash one of these and then into it so that I can use my banking app?
Click to expand...
Click to collapse
Can you explain? Sorry, but your question doesnt make sense..

theKramer said:
Can you explain? Sorry, but your question doesnt make sense..
Click to expand...
Click to collapse
Apologies, what I meant was can any of the above mentioned roms be installed and then can the rom be unrooted.
The reason I cant have a rooted rom is because my banking app that I regularly use won't run on a rooted device.
I have an F400s and rom updates are few and far between. Their are some niggles with the current official LG rom such as problems with dropped calls, but because it's an F400s I can't exactly ring LG and complain because the phone is an import.
I'd like to run a custom rom that has decent support but I need to be unrooted for my banking app.
Sent from my LG-F400S using Tapatalk

Did you try to use Root Cloak to hide root from your banking app?
Otherwise, if you flash the non-rooted ROM you lose root again..

I read some threads a while ago which suggested that the Barclays Mobile Banking rom originally worked with Root Cloak but then didn't answer never versions of the banking app were released.
I might try flashing another Rom and try Root Cloak for myself, but to be honest I don't 'need' root these days to be honest.
Out of the roms mentioned above, is there one in particular which you would recommend?

CloudyG3 is probably the best when starting off as it's the least modified.
SlickROM is the smallest in size so is probably the most optimized.
Though, if you don't care about the camera, BlissPop or Resurrection Remix offer the most customisability & performance..

Thank you for your advice.
Typical though, the thread I'm reading through at the moment isn't one that's on your list. What do you think of XtraLite?
....Under their feature list I'm trying to find out what the 'LTE / 4G Mod' is.

I haven't used it myself..

theKramer said:
I haven't used it myself..
Click to expand...
Click to collapse
That doesn't inspire me to use it then. You obviously know a lot more about the current roms than I do hence I'll probably go with Cloudy.
I've rooted and used custom roms from the G1 right up to getting my Nexus 4 but it's just not something I've down with my G3 F400s but I feel like I should having had it for a year now.
Which rom are you running at the moment?
Sent from my LG-F400S using Tapatalk

I think it would be safer to flash Cloudy first, as either XtraLite or SlickROM need a 20P ROM to be flashed first. Can't remember which one tho.
The only downside with Cloudy is that you have to flash the CTT mod after, as its are not built in...
I flashed Cloudy on mine, only received it a week ago via Aliexpress, and it's going great, but will probably try both XtraLite & SlickROM in the next few weeks to check the differences
Happy flashing

I flashed both XtraLite & SlickROM, and must say I prefer XtraLite.
The DPI fits better

all 6.0 ROM have rotation problem? or Only my phone?

Hi there, I've try many android 6.0 ROM on my LG F180 (Korean version Optimus G). Seems like everyone of them's rotation function is not working. If I flash back to 5.X rom or kitkat roms. Then it gets back to normal. Does anyone got the same problem? Does anyone know how to fix it? Or I did something stupid? Thanks!

Mine is working just fine with Nitrogen OS (E975)

Hi there!
I am having these issues ever since I flashed 5.1 unofficial CM12. The rotation and auto-brightness went broken. Here's what helped recently:
- did a backup of my ROM in TWRP
- plugged the phone to a PC and got all my data properly copied, including the TWRP backup (it turned out to be essential, but that's just my fault)
- downloaded original KK firmware for my phone edition, also downloaded LGFlashTool 2014
- went back to stock using instructions from XDA
- rooted again and got TWRP recovery up and running
- did a full wipe, yes, including internal storage (yet I don't know if you need this, I just went for it)
- flashed the ROM I chose (im my case it was the CM12 backup I had cause of gapps issues with 6.0)
Don't know why but the sensors worked perfectly for me at that moment. I have broken them again by flashing another custom ROM over the CM12 and today I am going to give it another go.
Also, while browsing XDA I came across various posts stating that when you downgrade to stock or actually even another ROM based on official KK and only then flash the custom ROM it should all work again. In my case it seems like a coincidence, or the internal storage wipe worked miracles.
Good luck!

Mine is working. Did you tried the XenonHD 5.11 or the XenonHD 6.0 rom?

got the same problem

rext3r said:
Mine is working. Did you tried the XenonHD 5.11 or the XenonHD 6.0 rom?
Click to expand...
Click to collapse
I did try on XenonHD 6.0 rom, but the rotation still doesn't work. All others Kit Kat or Lollipop ROM are fine for me. BTW, Are U having F180? or E975?

kitty_kitty said:
I did try on XenonHD 6.0 rom, but the rotation still doesn't work. All others Kit Kat or Lollipop ROM are fine for me. BTW, Are U having F180? or E975?
Click to expand...
Click to collapse
I've got the E975.
Did you do a full wipe?(dalvik cache , etc..)
I think you did , because you tried everything , but maybe not

I've got a massive battery drain issue with 6.0 Xenon HD. (50-70% overnight)
I've installed all the same apps as on my previous rom.(1-2% overnight)
Anyone else?

how about the camera? do you are able to do photosphere or panorama pictures with google camera app??