Hello my friends.
I'm here to ask for your help, could someone please help me.
I have a Samsung Galaxy Note 10.1 2014 edition SM-P601 (wifi + 3G) variant, it has installed Android 5.1.1 Lollipop.
From the settings menu i already notice that my tablet has a Kenya (AFR) Firmware.
At this point i have bad wifi connections and bad GSM internet connections. The signal is very weak, and the speeds are always arround 1mbps / 2mbps / 6mpbs.
I assume that changing the firmware to another version, should fix my problem.
The situation is that i can't flash any other stock firmware or custom firmware. Even i can't flash any recovery (TWRP or CWM) in my device.
When i start the flash process in ODIN, some errors occurs. i get stucked on "Get PIT for Mapping..." and the process stops.
I can't do anything on my tablet.
Product Name : lt033gxx
Product Code : SM-P6010ZWEAFR
Original CSC Code : AFR
Firmw CSS Code : AFR
Active CSC Code: AFR
CSC Country : Kenya / AE
BL Version : P601XXSDPK1
PDA Version : P601XXSDPK1
CSC Version : P601OJVDPI1
Modem : P601XXUDPC1
How can i pass this issue, i want to flash or a custom rom or another stock rom (like the russian's (SER) one).
Best regards from Portugal.
TM
so much views.... and nobody can help me... :crying:
I've flashed my tablet lots of time using either ODIN or TWRP, and I've never encountered something like this. Perhaps you should try finding the full release of stock firmware for p601? The one that also has the bootloader, partition table, whatever, that also has files attachable to ODIN's BL, AP, CSC etc. I'm using P600, I have the full actual firmware release that I can flash using ODIN, in case something goes really badly, where it basically deletes everything and installs fresh software, partitions and all. Resets all to stock of course, but fixes every single problem. Works all the time I need it to. However, in case you do have such a release, have you tried using ODIN from another computer?
See, apparently there's an issue, in which you have to connect the tablet using a USB 2.0 port (black colored), rather than 3.0 (blue colored). It's related to drivers, specifications, or whatever thingamagic beneath the carpet, but I always flash and connect using 2.0 port, on a Windows 7 PC. USB 3.0 gives me lots of issues, such as device not recognised, random disconnection etc.
Another suggestion, in addition to connecting using port 2.0 from another computer, is to use a different ODIN version? Try searching for releases that are used/recommended by developers of the device.
Finnaly, i just got my tablet flashing again.
I just resolved those problems.
I tested using my other PC, with other O.S (windows 7) other diferent pc, and the flashing process worked like a charm
PS: i always use 2.0 usb ports.
But my wifi and gsm connections speeds remains the same, i continue to have very bad and weak connections speeds.
I don't know how to resolve this issue. Maybe replacement the wifi and gsm boards or antennas may resolve the issues....
Related
my device now: i9195, I9195XXUCNE6-DBT
I experience weak signal and many connection dropdowns. When this occured first, after i upgraded f4ktion Kernel 1.3.6 to 1.4.5 and
an older version of Carbon Rom (4.2.2) to 4.3 Carbon Rom. Until than everything was fine, flash of rom and kernel did not made any problem.
Btw i used Odin3 3.09 and clean install (step by step like in the guides) all the time.
After some days this realy annoyed me, so i went back to the older Carbon and kernel - problem still occurs.
So i went back to stock rom I9195XXUBML4-DBT (original was UBML4) - problem still existing.
Some time later f4ktion 1.5 and Carbon 4.4.4 was available, so i tried this..still no solution.
Now i am back to stock and updated to I9195XXUCNE6-DBT, same problem.
Some research told me many ne stuff to know..like flashing modem only. I tried some, nothing helped.
After hours of pointless googleing i noticed something on my phone.When i dont type the pin, i have normal signal. As soon as i type the pin
and "activate" my simcard, the signal strength drops. So i googled again and found this:
[Bug Watch] Android 4.3 Radio Bugs Causing Cell Connection Drops On Some Nexus 4 Handsets, Fixes In Sight (not allowed to post links)
I changed the network type to WCDMA only - it helped for some minutes(not many..maybe 2-3). I changed to GSM only and i had normal,
stable signal for like an hour. But later signal loses strenght again, and i need to change network type again.
I have the feeling, that its like a reset or restart of the radio.
But now i am all out of ideas and need some help.
Last thing i can do, is to bring it to repair. But my Knox says 0x1, so maybe you can help me before i ask Samsung.
I have similar problem since ugrading to KitKat roms. I had no problems with previous none Knox roms with MH3 modem but now with NE6 and NF7 KK modems the signal swings constantly up and down from 4 to 1 bars. This is in areas I previously had good signal. Internet also keeps dropping out requiring data toggling on and off. I've reflashed KK 20+ times and haven't been able to get rid of this problem yet.
I'm not sure if pre knox modems are installable but I intend to try and reflash MH3 modem, once I manage to do a successful backup.
I solved a similar problem by downgrade to 4.2.2 Brazil NE2, knox 2. Flashing separate modem (NE2), and reflashing full rom again. No problems for now
Now you stay on 4.2.2 ?
I dont understand why some people do have problems and some not. Is there different hardware version causing the trouble ?
Give me pls some information how you did the downgrade.
-Nandroid Backup
-philz
-Odin (if yes which version)
-why did you choose that rom
I tried to, but wasnt succesfull. I used Odin3 3.09 to flash 4.2.2 (UAMF5 i think) rom and got a brick. When trying to fix this nothing helped until i tried to flash with Odin3 3.04. But all i could do was flashing newest FW again. Did not test more after that, because i was very busy.
If you say that going back solved your problem, i will try again go go back myself. I've found some information on that and when its done i give some informations.
Same here, help?
I'm having the same problem with a newly acquired handset. I have full signal on some places and nothing on others, unfortunately in my house I have no signal! So it's quite exasperating.
My baseband version is I9195XXUCNE6
Android version is 5.0.2 with 3.4.0-cyanogenmod-g92aec50 [email protected] #1 kernel
Cyanogenmod version is 12-20150306-UNOFFICIAL-serranoltexx
Would it help if I flash a separate modem file through Odin? In that case, which one should I flash?
Any help would be appreciated a lot.
Thanks
franzasensi said:
I'm having the same problem with a newly acquired handset. I have full signal on some places and nothing on others, unfortunately in my house I have no signal! So it's quite exasperating.
My baseband version is I9195XXUCNE6
Android version is 5.0.2 with 3.4.0-cyanogenmod-g92aec50 [email protected] #1 kernel
Cyanogenmod version is 12-20150306-UNOFFICIAL-serranoltexx
Would it help if I flash a separate modem file through Odin? In that case, which one should I flash?
Any help would be appreciated a lot.
Thanks
Click to expand...
Click to collapse
If you have warrenty left then you should go to customer service then they will change your mainboard. and it would bw okay.
Hi guys. So about 1 week ago I finally let my s4 mini I9195 Do the update its been wantng to do for a while. Turns out when the update completed and the phone was turned back on again I couldnt connect to wifi, just press the toggle and it does nothing. So ive been lurking the web for solutions and done around these:
-Taking battery out various times and in diferent situations
-http://forum.xda-developers.com/showthread.php?t=2364980 did that even though I have no idea what rooting is and such though Ive read about it 1000x , just dont get why you do that or why there are so many ways and such
- wiped cache/ returned to manufacturer settings also a few times
So, by this point I have really no idea how to fix this guys and its been a pain because I am in erasmus and could really use the wifi. I really apreciate your time for reading this thread and hope that you are able to help. Awaiting your sugestions
Thanks
What you're describing is a very typical issue: the firmware wasn't updated completely (e. g. modem not updated). Solution: flash the firmware again with Odin.
Sent from my black pearl using Tapatalk
Code:
nunein said:
What you're describing is a very typical issue: the firmware wasn't updated completely (e. g. modem not updated). Solution: flash the firmware again with Odin.
Sent from my black pearl using Tapatalk
Click to expand...
Click to collapse
Hey man, thanks for the reply. Can you give me a little more info on how to do that procedure?
Search for Odin (v3.09 or so). Check your firmware version and download it at Sammobile.com.
And use the search for further information.
Sent from my black pearl using Tapatalk
nunein said:
Search for Odin (v3.09 or so). Check your firmware version and download it at Sammobile.com.
And use the search for further information.
Sent from my black pearl using Tapatalk
Click to expand...
Click to collapse
Hey man thanks again for the reply.
I was doing this http://forum.xda-developers.com/galaxy-s4-mini/help/to-stock-firmware-choosing-problem-t2968295 but near the end it fails for some reason... any idea why?
So I tried it again and this just happened.. Kies wont even recognize.
http://imgur.com/a57W9KM
If you are already on Kitkat you need Kies 3.
Have you probably tried to flash an JB firmware?
Search at Sammobile for the latest firmware for your country and network provider and flash it with Odin.
Hi guys,
i have a similar problem. I flash many time a couple of ROM (CM11 - slimkat) but the wifi doesn't turn on and also the cellular network and the bluetooth don't work...
In the last days i had many problem with my phone because i make a mistake during the flash (on odin) of a stock rom.
Do you have any suggestion?
Thanks a lot
I had the same problem. Wi-Fi didn't work after uploading KK firmware for my country (while to my surprise KK firmware for Belgium worked ok). I tried 3 times to upload KK firmware (XEO, anr PLS) via Odin 3.09 with the same effect (no way to turn on Wi-Fi). Then I used Odin 3.06 and it worked for me (I was able to turn on Wi-Fi without any problem - strange but it had worked). So try to use older ver. of Odin first.
I've run into a bit of a pickle with my root attempt on one of my LG G3s. The first went without a hitch while the 2nd didn't go so well. In order to flash CM12, I followed the LG G3 stock flash guide from hyleton to downgrade from Lollipop to 4.4.2. I then flashed CM12 with TWRP and hit a snag where the mobile data connection would try to establish, and the phone would black screen requiring me to pull the battery. The only way to get passed the CM12 setup would be to boot without the TMO SIM card.
Because I considered this a failed port, I flashed back to stock 4.4.2 but can't connect to the TMO mobile data network, but I am successfully able to get passed initial setup with the SIM Card in. IMEI and mobile number are still registered to the device, so at this point I'm assuming the issue is with a bad modem flash that occurred when I went back to stock 4.4.2. When I check the baseband version, the number/letter combo is quite large and doesn't seem to match with your typical Baseband versions, hence why I think I have a corrupt modem.
I can't find any modem software packages out there for the US TMO LG G3 variant, so was hoping someone could point me in the right direction or otherwise help provide some guidance on how to get my data connection back.
Hey,
I've got the exact same problem. Did you manage to repair it?
Thanks.
C.
You could try asking for a modem package for your variant here on the forums, otherwise you could try a custom ROM and wiping everything even the modem before flashing, most ROMs come with a modem built in.
Hello, I have been searching the internet for months trying to find a modem firmware file for this tablet. I was wondering if someone could please provide that for me so that I can flash it to this tablet and fix the Wi-Fi. When I try to turn on Wi-Fi on this tablet it gets stuck at "Turning on..." and there is nothing I can do from there in the graphical user interface. However when I run the command "adb logcat" in a terminal with this tablet connected, I am able to read the crash dump of the wpa_supplicant. It says that the radio is unknown and that it failed to initialize the driver interface. This tablet is not rooted and is not running any custom software or firmware. This problem stems from a failed software update. I have tried factory resetting the tablet via the settings app and by “Device initialisation” in the Smart Switch software. Just to be clear, all I need is the modem.bin file for the Samsung SM-T520 (Galaxy Tab Pro 10.1). If someone could provide that for me or tell me which firmware would contain the modem.bin file, that would be great! I have downloaded many firmware files for this tablet (I downloaded at least 20GB worth last night) and none of them contain a modem.bin file. Thank you in advance and have a great day!
Have you had any resolution to the issue?
I have been working on a separate thread for a T530NU that is having the same issues. In my case, I do not even have access to the UI through stock ROM's and have to rely on custom ROM's to see the wifi and BT issues as well as the logcat readout.
What OS are you running on the tab and did it go through a OTA update from KK to LP?
https://forum.xda-developers.com/ta...xy-tab-4-10-1-sm-t530nu-t3441044#post74755443
https://www.sammobile.com/firmwares/galaxy-tab-pro/SM-T520/
Choose your region (US is "Cellular South" for some reason)
I think they usually have the modem file included, not 100% sure but probably your best bet. It is supposed to be the entire stock firmware...
So I rooted my phone (s4 mini i9195i), installed lineage OS. Because the phone was giving me too many problems, I used Odin to flash back the stock ROM (netherlands version) from Sammobile. It was a success. But since I flashed the stock ROM I cannot enable the wi-fi. I tried so many things from the internet (service mode window, clearing cache,etc) but that does not seem to work. I have no clue what the problem is and how to fix it.
What I am sure of is I have been using wi-fi before this. I also see that the IMEI is PASS. Can anyone please help me with this issue.