Does anyone know of one of these types of cases:
https://www.amazon.com/gp/product/B06XSVS3Q8/ref=oh_aui_detailpage_o00_s00
That supports wireless charging? I use wireless charging at home and at work on a pair of samsung QI-compatible fast chargers, but can't find a case that supports it while still in the case. I'm guessing because the ring interferes with the coils and it's probably also too thick.
Any advice would be gratefully accepted.
Related
Im not sure if there's been a new development on this or not but I didnt get find anything.
These Qi Receivers like:
http://www.ebay.com/itm/New-Qi-Wire...S_Cell_Phone_PDA_Chargers&hash=item4ac6c3197e
http://www.ebay.com/itm/Qi-Wireless...S_Cell_Phone_PDA_Chargers&hash=item1c3375487b
The qi wireless charging mod seems a little too complicated. Now that we have these receivers has anyone tried fitting one to the S2?
I know they arent made for it and there are special connect points in teh S3 S4 and the such but cant an end be splayed open and put in between the 1st and 4th connectors where the battery makes contact with the phone? It would be a little difficult to force fit it but it would be snug and not likely to move and fits over the battery well. Has anyone tried any of this?
Rico
Qi Wireless Charging
Hi, I just bought a Qi Wireless charger & Charging Cover and its pretty cool! I bought it from the Bitmore UK site.
They have a wide range of Qi (wireless charging) Devices and the one I bought for my S3 is universal. You can charge any qi enabled devices on this pad.
Just search for: BITMORE Qi Charger
I have a i757M, and have been looking into wireless charging. My phone has the charging port inside the back cover (like the S3, S4, and S5 etc), but I have been unable to find a Qi receiver made to fit this phone. Does anyone have experience either finding one that works, or modding one? It lookes like some of the S4 receivers may be fairly easy to mod....
Ok, I don't think this phone has any pre-built Qi functionality. Anyone have ideas for modding a USB/Charging board to add Qi functionality?
Code:
[CODE]Universal QI Wireless Charging Receiver film for micro-USB (Port A)/CODE]
This is all you will need- search for it on amazon
Anyone using wireless charging on the MI3? It's only possible with a receiver, btw, it's not built in.
Wireless Charging
reneftw said:
Anyone using wireless charging on the MI3? It's only possible with a receiver, btw, it's not built in.
Click to expand...
Click to collapse
I am curious has anyone tried using a wireless charging add on and know if it works properly?
I'm a writer for Qiwireless.com and I use my Mi3 with a universal wireless charging receiver to charge it.
I saw something here: facebook.com/MiuiCzechSlovakXiaomi/posts/10152284167068959
Manufacturer named Lencow doing this type of chargers for MI's. You can find the net for the price.
is it for real that mi3 supports wireless charging??
sdnavale said:
is it for real that mi3 supports wireless charging??
Click to expand...
Click to collapse
Note, WITH a receiver. A receiver is a piece of hardware which sits under the base of the phone, and is connected to the charging circuit. Just google the term.
You'd have to be really motivated to take your phone apart, just to attach that. Without considering the space that module would need vs the available space inside the phone, which is pretty slim to start with. Actually with a metal phone back, I believe the module would have to sit outside of the phone, between the plastic cover and the back - so the phone back would not be flat.
I have had a Nexus 4 with wireless charging for the last 2 years, and I rarely use the wireless charger I bought:
- charges slower than a wall charger
- if you pick the phone up - as we all do - you stop charging and additionally multiply the number of charging cycles.
Cables are not as cool as a Qi pad, but a Qi pad also needs its cable...
Anyway, out of the box, the mi3 doesn't do wireless charging - just confirmed that with my wireless charger
stupid!!! pls improve yourself bout the 'Electronic Science and Technology' knowledge~ don't ask such an idiot question!!!
Hello everyone! How are y'all doing on this lovely week? I'm doing great!
I got my Zenfone 2 last week and I'm loving it, but I miss the hability to wireless charge it and especially to put it in the Air dock when I'm my car. So here I came asking for your aid!
Is there any dock like the Air dock for the Zenfone 2? I have an Air dock (1st Gen) that I bought back when I had a Gnote2 and because of the curved back and some wearing of the rubber in the dock the Zenfone 2 doesn't hold very nicely, so I'm thinking about making my own magnetic dock to put in the car.
Also, is there any way to get Qi wireless charging to work on it?
My initial idea on the magnetic dock won't even consider charging wirelessly since I plug it via a cable when on the car to listen to music/podcasts but maybe If I could get it to work, as times goes on, I would find a way to charge it wireless and get some sort of bluetooth dongle for the car.
My thoughts on a project for the dock involves using HDD magnets since they are really strong and it would make the device secure. But my concerns are if it's safe to use magnets that powerful near a phone for it's hardware and for it's battery, since s not easily replaceable.
Anyone here ever did or saw some sort of project like this? I'm possibly gutting my Air dock if the Zenfone doesn't support Qi wireless.
Any input is helpful, I'm completely open to suggestions!
There is an existing thread about QI solutions since there are no contact pins for wireless charging without some heavy modding of the device casing or usage of the USB port. As far as I'm aware, magnets have virtually no effect on the hardware except for a few sensors like the magnetometer and possibly the magnetic cover sensor.
raynan said:
There is an existing thread about QI solutions since there are no contact pins for wireless charging without some heavy modding of the device casing or usage of the USB port. As far as I'm aware, magnets have virtually no effect on the hardware except for a few sensors like the magnetometer and possibly the magnetic cover sensor.
Click to expand...
Click to collapse
Thanks! I'll try to find some weaker magnets to keep it in place without such a load in my mind, thank you for your help
Sure, good luck and I'd be interested in seeing what you think up.
I'd opt to use a cradle or similar holder instead of magnets. A strong enough magnet would probably add too much bulk. When looking for qi receivers, make sure to get one that has data pins (which will most likely be shorted to allow rapid charging). This one is still a reasonable price http://www.amazon.com/gp/product/B00WKWWMAM and fits well enough in most cases. It does even fit alright inside the back cover, but you're better off putting it between the phone and case. It'd make more sense to go qi all around since it becomes a hassle to unplug it..
If anything, you could save a bit of bulk by ripping it apart and removing the magnet. It does seem to severely cripple nfc though.
As for bluetooth receivers, they have become significantly cheaper recently. You could get an old bt2.1 a2dp button-less one and hide it away somewhere. I got one for $3 shipped. There are apps that can be set to auto-play on pair. For $10-15 more, you should be able to find something with buttons (back/playpause/next) and aptx support. Usually these will have a microphone as well
I'll update this as I get to test with more cases.
My test charger is the the Samsung Wireless Charger: http://www.samsung.com/us/mobile/mo...charging-stand-black-sapphire-ep-ng930tbugus/
bought through a 2-pack deal from Groupon
DO support wireless charging
Luvvitt clear case quick charge works fine (https://www.amazon.com/LUVVITT-Scra...g-Samsung/dp/B06XRQ9XRS/ref=sr_1_1?s=wireless)
Do NOT support wireless charging
Sparin hard case with ring - does NOT support wireless charging (https://www.amazon.com/SPARIN-Protective-Rotating-kickstand-Samsung/dp/B06XHFY9BZ/ref=sr_1_1)
Damda glide and Damda folder (https://vrsdesign.com/collections/galaxy-s8-plus/products/galaxy-s8-plus-case-damda-glide-series) - I bought the glide and realized it when I tried to use the wireless charger, the case is just too thick to accommodate all the cards
https://www.amazon.com/gp/product/B06XSVS3Q8/ref=oh_aui_detailpage_o00_s00
This one made me sad because it also has a built-in ring in the back. *sigh* it's a really well made case with an integrated ring and yet won't work with wireless charging.
Cases that do and don't
Terrapin flip case doesn't
Griffin Reveal does work.