anyone know if there will be an inductive charging pad and case for our notes ?
still nothing ?
I saw a Korean sample at CES this year. It worked pretty good since I have tested with my note. But so far nothing...
Sent from my GT-N7000 using XDA
possible, but...
as far as i know, the required connections are not available in the current design for inductive charging to be possible. However, It has been done before by hard soldering the coil from a palm pre to the logic board, specifically to the usb ±5V power line. http://forum.xda-developers.com/showthread.php?t=1451668
Could they not case that the note fit into and it uses the micro-usb socket to charge, I have seen external battery`s like this, it should not be that difficult to add an inductive charge coil/receiver.
Or make a slightly reduce capacity battery with the inductive charge coil/receiver buit in.
John
i was thinking along the lines of a battery , i remember seeing a mod where someone added inductive charging to his older phone by taking out the induction coil and soldering it to the charging pins and was very neat
Wireless Charging for Galaxy Note
I have found this site that is selling Wireless Charging Cases for Galaxy Note.
is a Korean company that is making some cases/covers for Galaxy Note, compatible with QI standard.
There is also a video on YouTube
I wonder if they ship outside of Korea.....
any help ?
I've received my universal Qi wireless receiver today. The receiver is smaller than I had thought and fits perfectly into the Moto G. Since our phone lacks internal preparation for Qi (like it can be found on the Samsung Note 2), the connection is made via a micro USB plug. The backdoor can still be clipped on without being disturbed by the Qi receiver pad or its flat band cable. Charging time should be about the about the same as charging the phone from a PC USB port that doesn't output more than 500mA.
This solution is obviously for those who don't need the phones usb port on a daily basis.
The adapter on the left picture (and in the video) is from ebay and is the one that arrived here first. I’ve changed the cable routing to remove the ugly bulge that was visible on my first picture. This adapter outputs a maximum of 500mA and can be purchased from ebay.
Make sure to purchase the "interface layout A, narrow interface up” variant.
http://www.ebay.com/itm/261348107126
17.Jan.2014 - The picture on the right shows an adapter purchased from DealExtreme, that arrived here yesterday. This adapter delivers up to 650mA and the flat band cable comes out of the lower side instead out of the backside which removes the need to bent over the cable.
http://dx.com/p/zy-408-wireless-charging-receiver-for-mobile-phone-micro-usb-black-259151
Both adapters work well, so don't worry if you've already bought the one I've first reviewed. (I have both version in use on different phones)
Here is a small video that shows me placing the receiver inside the Moto G:
http://www.youtube.com/watch?v=U2WPjw-WaCI
Update 13.02.2014
From my testing I can tell the following:
1. An unrooted Moto G needs to be screen locked (I use the pattern lock type) or it will refuse to charge due to the missing pins. You can unlock the screen while it is charging as long as you don't lift it from the qi charger. (tested on 4.3 and 4.4.2, DE and FR firmware)
2. Root in combination with dubidu's tool makes it more straightforward but is not required.
Shadow_2k said:
I've received my universal Qi wireless receiver today. The receiver is smaller than I had thought and fits perfectly into the Moto G. Since our phone doesn't support Qi in any way, the connection is made via a micro USB plug. The backdoor can still be clipped on without being disturbed by the Qi receiver pad or its flat band cable.
This solution is obviously for those who don't need the phones usb port on a daily basis.
Should you wish to buy an adapter for your Moto G, make sure to get the "narrow-interface up" variant
I've also made a short video:
Click to expand...
Click to collapse
Nice. Can you tell us where you got it from -- is it just one manufacturer making these?
Cheers.
I just bought it off amazon (hooray rewards card, it was free).
http://www.amazon.com/Universal-Wir...micro-USB/dp/B00H7FJX7M/ref=pd_rhf_gw_p_tnr_1
Theres a few on ebay if you just look up "Universal QI Wireless Charging Receiver film"
JCBomb said:
I just bought it off amazon (hooray rewards card, it was free).
Theres a few on ebay if you just look up "Universal QI Wireless Charging Receiver film"
Click to expand...
Click to collapse
Thanks. I had looked on fleaBay and it looks like they all have the same packaging. I imagine any qi wireless charger thingy should work. In theory.
anyone know if this would work through an otterbox case? or I guess if this would even work with one due to the fact the part that plugs in sticks out a little bit...
I've bought it here:
http://www.ebay.com/itm/261348107126
The auction uses the same pictures as used in the amazon offer posted by JCBomb, might even be the same seller.
This is cool! I just hope there's like another way we can integrate that wireless charger.
Just saw your post at android.hilfe and started looking for some charger, it's indeed a neat solution.
Universal QI Wireless Charging Receiver film for micro-USB of All Android Mobile (7,99 USD):
http://cgi.ebay.fr/ws/eBayISAPI.dll...eName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
QI Wireless Charger Transmitter Charging Pad for Nokia Lumia 920 HTC 8X Nexus 4 (15,39 USD):
http://cgi.ebay.fr/ws/eBayISAPI.dll...eName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Are u guys using this wireless QI receiver? I'm going to buy one next month, D: . Just for curiosity, how much time do u guys spend to get a full charge with the QI
Guys i found this one at dx.com
http://dx.com/pt/p/micro-usb-qi-wireless-charging-back-clip-black-253066
Those kind of product are not so great are chaging, basically it's almost the same power that if you charge through uSB = 500mA.
What you need to check is the charging value, sometime it's :
- 400mA or less (avoid it, will take ages to charge),
- 500mA (just like your regular USB charger),
- 1000mA (great ones, will charge just like a wall charger, twice as fast as the previous model).
So the one at DX is great, but they're cheaper on ebay, plus you can choose between Black or White - http://cgi.ebay.fr/ws/eBayISAPI.dll...eName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
This one was the cheapest (around £15) I could find and works fine.
http://forum.xda-developers.com/showthread.php?t=2601628
impressive
wow, so cool :good:
Am I the only one thinking about finding the plug they use with all the pins intact and integrating a micro sd card into it for OTG storage? Wireless charging and storage, all in one, and fitting under a case.
I had that exact thought about two hours ago. Throw NFC in their while your at it.
Sent from my XT1034 using XDA Premium 4 mobile app
I had actually started to do some verrrry preliminary research into something like it using a ribbon cable and another usb port, so you could plug the phone into a wall charger and have the usb/sd card piggybacked off the cable. Hadn't gotten very far though...job, kid, wife etc.......
Someone TAKE MY MONEY for it!! Especially since it seems we're all soon to be headed down the 'no sd card' path.
I just got a Moto G for my wife and Nokia Wireless Charging Plate DT900 is not working any ideas why ?
It's not working with one of the universal QI receivers? Have you try enabling the floating charging (see my post)
tomciopaluch357 said:
I just got a Moto G for my wife and Nokia Wireless Charging Plate DT900 is not working any ideas why ?
Click to expand...
Click to collapse
Yes, you also need receiver in your phone.
tomciopaluch357 said:
I just got a Moto G for my wife and Nokia Wireless Charging Plate DT900 is not working any ideas why ?
Click to expand...
Click to collapse
Hello.
The Moto G doesn't support Qi on its own, you'll need to rig it with an universal wireless Qi charging receiver.
You can buy them from ebay, dealextreme and some other china based stores. The first post contains a short installation video.
This one from dealextreme will work (Output up to 650mA):
http://dx.com/p/zy-408-wireless-charging-receiver-for-mobile-phone-micro-usb-black-259151
as well as this one from ebay (Output up to 500mA):
make sure to purchase "interface layout A, narrow interface up)
http://www.ebay.com/itm/261348107126
I have a i757M, and have been looking into wireless charging. My phone has the charging port inside the back cover (like the S3, S4, and S5 etc), but I have been unable to find a Qi receiver made to fit this phone. Does anyone have experience either finding one that works, or modding one? It lookes like some of the S4 receivers may be fairly easy to mod....
Ok, I don't think this phone has any pre-built Qi functionality. Anyone have ideas for modding a USB/Charging board to add Qi functionality?
Code:
[CODE]Universal QI Wireless Charging Receiver film for micro-USB (Port A)/CODE]
This is all you will need- search for it on amazon
Hey all,
For those who got their Note 4 early from AT&T did they pull a fast one like the LG G3 and rip out qi charging pins in favor for powermat?
Thanks!
My understanding of qi with the note4 was that it only was available with the optional case, and it's not built into the phone.
Wasn't built into the s5 either.
Sent from my SM-G900A using Tapatalk
Can someone with an att note 4 pop in a qi receiver and see if it charge up? I have a bad feeling they went pma just like the g3.
It's Qi charger. I don't have the adapter yet, but others have pointed out that the contact points on the back match the Qi specifications. I just got my Note 4, and opened the back, and indeed the contacts are identical to my wife's S4
Just because it has the Wireless charging contact pickups, doesn't necessarily mean it will work with Qi. The LG g3 had the same contact pickups, but at&t disabled Qi charging at the hardware level, and made those contacts only work with pma charging receivers.
let say wireless charging works, will it still take advantage of the fast charging feature though?coz I don't think so
lyrad12 said:
let say wireless charging works, will it still take advantage of the fast charging feature though?coz I don't think so
Click to expand...
Click to collapse
NO, wireless charging is a Lot Slower charging than with your USB cable and AC adapter for Fast Charge.
It supports Qi. I bought the official samsung back. I use it with a Qi charger I bought off amazon. Works great but due to bulk, limits my cases.
Wireless charging can be done if you buy a wireless charging battery cover and these have them built in also. A cheaper route is just buying these little wireless recievers and stick them in, you can get them cheaper on ebay (but my work computer can't access Ebay sites).
Wireless charging IS slower than normal charging, its all about convenience. I have a few around the the house and a couple at work. Most output .5 - 1 amp range compared to 2+ amp chargers and the included adaptive fast chargers.
The links are for example only, not telling anyone to buy anything. Hope this helps.
Here are my videos for some accessories I just finished setting up and testing for the past 2 weeks. Enjoy!
Qi Receiver pad: https://www.youtube.com/watch?v=lppntHQDPls
Qi Jellyfish Car Charger: https://www.youtube.com/watch?v=cACHmuAX9ts
Qi Generic Desk Charger: https://www.youtube.com/watch?v=Y4NWQaajoVw
Generic Aluminum Bumper: https://www.youtube.com/watch?v=-pqlIADNs0M
Feel free to ask questions about them!
Note: I used the included USB cables for my "field" testing, in case anyone was wondering.
Check out http://forum.xda-developers.com/showpost.php?p=49509790&postcount=52 regarding USB cables and quality
Can you show how it looks with a stock back cover? I also have a Qi charger pad and with stock back cover you can close it but it makes a bump at the "samsung" part and you can actually see the cover coming above the camera lens something that stock is the other way.
It annoys me so much I took it out and sttoped using wireless charging.