Develop Bugs

Case with kickstand from t-mobile

Ive has the kickstand case from t-mobile for about 3 weeks now and it has scratched my phone in 2 places just a heads up to anyone looking to buy the case
Sent from my HTC Glacier using XDA App

Where did it scratch it? I'm using the same case
Sent from my HTC Glacier using Tapatalk

As am I lol I was afraid at first because that sucker was snug lol
Sent from my HTC Glacier using XDA App

I don't have a camera but its scratched about 2cm above the back speaker and like in between the camera button and corner, the edge has its black paint come off
Sent from my HTC Glacier using XDA App

It kinda scratched 3 of my 4 corners as well. Not too bad, but you can see it's there. I really like the case, but taking it off and putting it on risks scratching it. Thank goodness i bought the gel case as well.

blitz911 said:
It kinda scratched 3 of my 4 corners as well. Not too bad, but you can see it's there. I really like the case, but taking it off and putting it on risks scratching it. Thank goodness i bought the gel case as well.
Click to expand...
Click to collapse
It's too tight and I am always afraid that I break off one of the buttons especially the camera button. I don't use this case anymore.

had this damn case and I think since I used it my bezel started to make a clicky noise at the lower left edge of the phone, I probably loosened the bezel when this damn too tight case wouldn't come off or it put pressure on the bezel the entire time and loosened it.

I've had no problems with the case on my phone. I do grit my teeth a little trying to take it off in fear it will hurt the phone, but it hasn't. I have so many people wanting a case with a kickstand for their phone. They are so jealous of my case!

hawaiianboi said:
Where did it scratch it? I'm using the same case
Sent from my HTC Glacier using Tapatalk
Click to expand...
Click to collapse
I have this case and an invisibleshield in between it and the phone...no scratching or issues here

Can somebody up a pic of what the case looks like?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

cybereclipse said:
Click to expand...
Click to collapse
I'm thinking of ordering this case, are you liking it?

I have this case as well. I show some very minor scratching on it and have taken it off countless times. The easiest way I can remove it is by starting in the upper left corner (near the ambient light sensor) and popping it off there. Then I put a nail under the lower left corner and pop it out. I never take it out from the right side first because the camera button isn't as flush as the volume button. The only real issue I have is the case doesn't extend far out enough to protect the chrome lip around the screen. Other than that, this case will hold me over just fine until Otterbox releases a defender for it.

Same case issue with scratching on the same spot. Also waiting for otterbox to come out. At least it will cover the scratches.

No more cases for me

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have stop using cases for quite sometime. The main reason is that here in Cambodia it is so affordable and convenient to get gadget flim wrap.
In the past I only use either clear and frosted flims. I opt for colored flim for my SIII.
Here is how it look like.
Don't mind the crappy screen protector. Waiting for the ones from xtremeguard
Sent from my GT-N7000 using xda premium

That actually looks really good! Do you know of any reputable online retailer that does something similar?

Not really sure. I the films are not pre-cut. They do it the old fashion way whereby the stick and cut thereafter
Sent from my GT-I9300 using xda premium

Do you have a link of what film wrap to buy? Thanks

No I dont, what I can do is when I visit the shop the next time I will look for the film maker/ brand.
Sent from my GT-I9300 using xda premium

That would be great thanks

it's just a film, you'll still get a dented casing if you dropping it.

psp888 said:
it's just a film, you'll still get a dented casing if you dropping it.
Click to expand...
Click to collapse
I'm pretty sure the SGS3 won't dent.

wow that looks great
Sent from my MB860 using XDA

sulkoudai said:
I'm pretty sure the SGS3 won't dent.
Click to expand...
Click to collapse
Just crack
Sent from my Transformer Prime TF201 using xda premium

What's up with the scratches on your screen?

alfy! said:
What's up with the scratches on your screen?
Click to expand...
Click to collapse
"Don't mind the crappy screen protector. Waiting for the ones from xtremeguard"
from the original post.

the point of cases are to protect your phone.
if you want it to just look good, then i think your idea is great.
but when the phone drop face down then i dont think there would be any protection

ddurandSGS3 said:
"Don't mind the crappy screen protector. Waiting for the ones from xtremeguard"
from the original post.
Click to expand...
Click to collapse
I'm using an extreme guard right now. It kinda sucks.
Sent from my GT-I9300 using XDA

Is that a wrap on the side as well? if so then how it feel and does it look like it will peel easily? I could use one on my pebble blue phone where the bezel is purple!

I'm going to give the official flip case a try once I finally get my Verizon version of the SGS3 here in the US. I'm bummed out that it doesn't have a magnetic clasp or anything to keep it closed, but at the same time it's a full on case so the phone should obviously handle drops much better. That all being said, the phone is gorgeous and I'm not gonna want keep it hidden! I have the full protection from Verizon so whatever happens to my phone I'll just get another one anyways.

I'm still on the fence. At this point though I'm leaning more towards no case.

i don't think screen protector is of any use because it is gorilla glass
Sent from my GT-I9300

I actually think my white S3 looks better with a Matt black case, because I like the white border around the camera, flash and speaker which contrasts against the black case, and then the black border around edge of phone, I mean not everyone will like that but I dog

I doesn't peel off easily and yes the side is wrapped. So far all the film that the shop doesn't love residue when it is removed.
It is a rough textured. Sort of like mildly used sand paper.
Sent from my GT-I9300 using xda premium

[Review] Fantom Tempered Glass Screen Protector

The idea of having the best and ultimate protection for our phones is great and luckily, X Gear had brought this to life with a tampered glass screen protector.
The screen protector was packaged up very nicely with its own separate box. A cleaning cloth was also included in the package.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation itself was really easy. What I did was peal of the first layer, which revealed the adhesive side, and aligned it properly according to the cutouts. After having it lined up, I just released the other portion of the screen protector. It stuck very nice and felt great.
The glass wasn't that thick at all; according to the website, it measures only .4mm thin. I had encountered a couple minor problems on my end, such as a decrease in touch sensitivity on the bottom half of the screen as well as a crack when I tried to rearrange the position of it. It might only be a defect with this particular screen protector but I am going to ask for a replacement and see if that helps at all.
After a couple weeks of using it, it provided a magnificent type protection that kept the actual screen's surface nice and clean, and I have to say it is worth the investment and trying it out.
Link to product: http://www.xgearlive.com/products/android/samsung/fantom

I have noticed that while the outer surface of the screen protector seems to be very scratch resistant the side with the adhesive seems to be easily scratched. when applying the SP i noticed some lint on the adhesive side of the SP so i used the provided MF cloth to clean the screen upon installing the SP i noticed a slight scratch. Despite this one minor nuisance i find that i am EXTREMELY satisfied with the Fantom SP, almost everyone that has seen my phone with the SP on has no idea by look or feel that i infact have an SP on the phone until I mention to them that there is a Tempered Glass SP on it.
I should also add that it fits perfectly with out any interference to the SGP Ultra Hybrid case that I use.

Thanks for the review, I'm definitely going to try one out for myself.

What's that case?
Sent from my Galaxy Nexus using xda premium

Memnoch30 said:
What's that case?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Doesnt seem to be a case. Think its just his white Nexus in the OP.

Ah that would be why. I gotta find that housing and do that.
Sent from my Galaxy Nexus using xda premium

Nice Review! I'm tempted to buy one now.

i know there are some people that don't seem to have issues, but i'd highly recommend against this protector. it kills the touch sensitivity on the bottom half of the screen and nav bar. i had to remove mine last week due to the sensitivity issues. looks like you pay for return shipping & 20% return fee, too, if you find you don't like it. read this thread:
http://forum.xda-developers.com/showthread.php?t=1823728

mohlsen8 said:
i know there are some people that don't seem to have issues, but i'd highly recommend against this protector. it kills the touch sensitivity on the bottom half of the screen and nav bar. i had to remove mine last week due to the sensitivity issues. looks like you pay for return shipping & 20% return fee, too, if you find you don't like it. read this thread:
http://forum.xda-developers.com/showthread.php?t=1823728
Click to expand...
Click to collapse
Same issue here loses sensitivey on Nav bar took it off after 1 day will take the loss

We might as well keep the discussion in the pre-existing Fantom thread: http://forum.xda-developers.com/showthread.php?t=1823728

was clearing dust on top... glass between bezel and speaker broke.

I am so angry at me right now... There is plenty of dust collecting between top bezel and glass, so I sticked a fingernail in there in order to clean the dust and as I was making my way through the bezel, the screen broke on the way from bezel to speaker, so now I have 2mm long crack on top of the phone....
I guess I can't do anything with this now. Are there any cases that can hide this part ? I mean - cases that reach or cover the top speaker
Shame... its a fantastic device but build quality is rather delicate especially compared to htc one or nexus4

Wow that is the first time I heard of anyone with this kind of an issue. Best you can do is either try to use a Anti glare screen protector or use a vinyl sticker that changed covers everything else besides the display, that would help cover up the cracks. You should post a picture of the affected area to get better opinions.
Sent from my GT-N7100 using xda app-developers app

Thanks for answer. What type of sticker do You mean ?
The full version of accident was like that:
in the morning I dropped my n2 from hands height (I am a tall 1,86m person) directly SCREEN onto tiles in my flat. I had pc+. Case and back cover FLIED away. I reinstalled everythig and noticed plenty of dust collecting on top - between bezel and screen in that little gap. So I started cleaning it and the area above speaker just cracked. I guess it must have been structurally damaged from the fall and I finished the job. I have n2 for 4 months and did that cleaning couple of times without problems.
Anyway. it looks like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The crack is a little more visible in real and really annoys me. Thankfully it appeared above the speaker so there is now way that crack can continue further.
So, what are means of hiding it? Can You link the screen protector and tape You recommend ?
Also - I want to get new case. that pc+ maybe did the job but now I want a case that will have higher bumpers from the screen side. And I want those bumpers to reach further into the device if You know what I mean. At least so they will hide the mentioned gap, so dust wouldnt colelct in there. maybe uag ?

For future referance I never use nails instead use a business card as it is thin enough and rigid enough to het the dust out. And I have no idea why I thanked to previous post 2wice.
Sent from my GT-N7100 using xda app-developers app

HiCZoK said:
Thanks for answer. What type of sticker do You mean ?
The full version of accident was like that:
in the morning I dropped my n2 from hands height (I am a tall 1,86m person) directly SCREEN onto tiles in my flat. I had pc+. Case and back cover FLIED away. I reinstalled everythig and noticed plenty of dust collecting on top - between bezel and screen in that little gap. So I started cleaning it and the area above speaker just cracked. I guess it must have been structurally damaged from the fall and I finished the job. I have n2 for 4 months and did that cleaning couple of times without problems.
Anyway. it looks like this
The crack is a little more visible in real and really annoys me. Thankfully it appeared above the speaker so there is now way that crack can continue further.
So, what are means of hiding it? Can You link the screen protector and tape You recommend ?
Also - I want to get new case. that pc+ maybe did the job but now I want a case that will have higher bumpers from the screen side. And I want those bumpers to reach further into the device if You know what I mean. At least so they will hide the mentioned gap, so dust wouldnt colelct in there. maybe uag ?
Click to expand...
Click to collapse
Have you seen those stands at the mall where they wrap your gadgets up with some type of vinyl sticker? It wraps around like Zagg invisible shield but you can choose different designs or texture and it actually holds on well. Well you can choose to only have it on the front screen and in white. I'm not much into all the various gimmicky covers available in the market but I'm using the Samsung Protective Cover+ which has protected my note2 pretty well and barely adds thickness. You should check that out.
Sent from my GT-N7100 using xda app-developers app

I know what You mean now. I don't want that tho. It's a ****ty country modding for my taste :lol:

HiCZoK said:
I know what You mean now. I don't want that tho. It's a ****ty country modding for my taste :lol:
Click to expand...
Click to collapse
I'd say just ignore it. And if it really really really bugs you then you may as well just replace the glass panel, which is a bit difficult, but still doable. Just check the link in my signature.
Sent from my GT-N7100 using xda app-developers app

Illumishield screen protector

Just received these today and totally pleased.
3 to a order. Easy to apply now stupid water spray or "special secret application serum"
Looks like glass acts like glass.
Not some rippled thin piece of Syrian wrap.
Easy to take off and get the damn dog hair I didn't see while applying and reapply . (use masking tape to remove hair)
http://www.illumishieldstore.com/iL...archPage=1&searchRank=salesrank&searchSize=12

Mine arrived today, and installed without a hitch.
Fit was good, but could have been a tiny bit larger.

Just finished installing mine as well. I guess the three holes on it aren't that bad. One for only the camera would have been better. I'm pretty sure you don't need holes for the sensors.
Also if you can get this thing installed on your first try, that is best. Otherwise you have to keep peeling it up with tape to then use tape to get the dust. I was being OCD about it and it took me a while.

Using the 'hinge' method it's perfect just about every time.
http://doityourselfproject2012.blogspot.com/2012/10/applying-screen-protector-try-hinge_13.html
http://www.youtube.com/watch?v=PMPqDwVZzzM

Thanks. Hinge methods looks good, I'll have to try that next time. Anyone notice the touchscreen acting up a bit after installing this? Not always responding.

Nope.
Zero problems...

Love this as well with only one thing. Only gripe for me is that it is NOT as smooth as your naked screen. I guess it depends on your fingers but mine isn't. Stylus works well through it though. Overall an excellent value for the price and # of pieces you get. I agree that 2 additional holes are not necessary and makes the screen more noticeable. In fact, since I hardly use my front facing camera, I'd wish they give an option to not have any holes. I'm sure the camera can still see right through it without too much degradation.

I have some of these coming in the mail...would one of you be kind enough to post some pictures?

Here you go....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

luckywabbit said:
Love this as well with only one thing. Only gripe for me is that it is NOT as smooth as your naked screen. I guess it depends on your fingers but mine isn't. Stylus works well through it though. Overall an excellent value for the price and # of pieces you get. I agree that 2 additional holes are not necessary and makes the screen more noticeable. In fact, since I hardly use my front facing camera, I'd wish they give an option to not have any holes. I'm sure the camera can still see right through it without too much degradation.
Click to expand...
Click to collapse
I sent Talkie Tech a message via Amazon regarding the additional 2 holes. I wonder if they do this for all of their protectors for other phones, tablets, etc.

luckywabbit said:
I'm sure the camera can still see right through it without too much degradation.
Click to expand...
Click to collapse
You'd be surprised. On my Razr M at least, any film on either camera makes the shots look like Vaseline was all over the lens. It's really, really bad. Nigh unusable.

danvee said:
Here you go....
View attachment 2162550
View attachment 2162551
Click to expand...
Click to collapse
How does it feel? Pretty slick; not a lot of 'rubbery' grab?

Not at all rubbery.

danvee said:
Not at all rubbery.
Click to expand...
Click to collapse
Ordered
Sent from my Nexus 7 using xda app-developers app

:thumbup::thumbup::thumbup::thumbup::thumbup:

I'm showing 2 SKU's on iLlumiShield's website. The OP link points to ILS14138 and the additional product I found was ILS14136. What's the difference?
******Never mind guys. I found the answer while writing this but I will keep my original question for anybody else that notices. The product on Amazon has the WIFI and LTE version. Not sure what the differences are when it comes to the glass.******
WIFI Version:
http://www.amazon.com/iLLumiShield-...5587099&sr=8-1&keywords=nexus+7++Illumishield
LTE Version:
http://www.amazon.com/iLLumiShield-...5587274&sr=8-2&keywords=nexus+7++Illumishield

Yeah. Ordered the Wi-Fi one just in case. Assume they are the same.
Sent from my Nexus 7 using xda app-developers app

Coronado is dead said:
Yeah. Ordered the Wi-Fi one just in case. Assume they are the same.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Add it is cheaper to order from Amazon. $9.44 vs $7.90.

cdmoore74 said:
Add it is cheaper to order from Amazon. $9.44 vs $7.90.
Click to expand...
Click to collapse
Nice savings.

Thanks for the thoughts, guys. Ordered a pack for - as of now - a temporary means of screen protection while I wait for some more tempered glass options. Hopefully. 3 for less than $10 shipped is alright in my book, and I certainly won't mind the additional cutouts. :good: