Hi there,
I have a HTC Desire 816 dual sim, i've been using CM v13 for more than 1 years, everything smooth after i changed my custom rom to MoKee (Nougat version). I got several isu when using MK, such as camera not working randomly, phone turned off when the percentages still > 20%, etc.
After that, I install another custom rom Lineage v14. I still get the same issues. And 3 days ago, I got my phone can't boot at all.
This is my phone detail :
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.31.50.0215
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HC46AMZ00381
(bootloader) imei: xxxxxxxxxxxxxxxxxxxx
(bootloader) imei2: xxxxxxxxxxxxxxxxxxxx
(bootloader) meid: A1000032DB03A8
(bootloader) product: a5_dwg
(bootloader) platform: hTCBmsm8226
(bootloader) modelid: 0P9C51000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 09813c97
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.016s
Click to expand...
Click to collapse
Bootloader is unlocked with S-ON.
The phone can't boot, randomly can't enter recovery and it's saying OS- (blank).
Anyone can help me?
I have successed flash the RUU firmware with HBoot method, but the phone still can't boot.
The OS- already filled with OS-1.56.707.1
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.31.50.0624_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.56.707.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HC46AMZ00381
(bootloader) imei: xxxxxxxxxxxxx
(bootloader) imei2: xxxxxxxxxxxxx
(bootloader) meid: A1000032DB03A8
(bootloader) product: a5_dwg
(bootloader) platform: hTCBmsm8226
(bootloader) modelid: 0P9C51000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 703d7086
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.031s
Click to expand...
Click to collapse
still anyone?
is the phone booting up??
sang6iru said:
I have successed flash the RUU firmware with HBoot method, but the phone still can't boot.
The OS- already filled with OS-1.56.707.1
still anyone?
Click to expand...
Click to collapse
still it boots into recovery?
first of all it has unlocked bootloader?
yes it is, but with usb plugged.
sang6iru said:
Hi there,
I have a HTC Desire 816 dual sim, i've been using CM v13 for more than 1 years, everything smooth after i changed my custom rom to MoKee (Nougat version). I got several isu when using MK, such as camera not working randomly, phone turned off when the percentages still > 20%, etc.
After that, I install another custom rom Lineage v14. I still get the same issues. And 3 days ago, I got my phone can't boot at all.
Bootloader is unlocked with S-ON.
The phone can't boot, randomly can't enter recovery and it's saying OS- (blank).
Anyone can help me?
Click to expand...
Click to collapse
If u can boot to fastboot I can help I guess
rjcool1999 said:
If u can boot to fastboot I can help I guess
Click to expand...
Click to collapse
tell me how? :victory:
sang6iru said:
tell me how? :victory:
Click to expand...
Click to collapse
Okk lets start.......
1st go to fastboot and connect phone with PC and use minimal fastboot and adb to flash recovery on your device. Command "fastboot flash recovery twrp.img"(recovery.img must be renamed as twrp)
2nd type fastboot reboot-bootloader
3rd type exit.
Now phone will boot to bootloader, from bootloader go to recovery and wipe everything including data system cache dalvik cache internal memory external sd card(if inserted). Now flash lineage OS 14.1, wipe cache dalvik cache, flash open gapps pico 7.1(arm) and wipe cache dalvik cache again now reboot
---------- Post added at 09:58 AM ---------- Previous post was at 09:55 AM ----------
Now if u are unable to boot into recovery then last option is to extract the system.img from system.new.dat and flashing the system.img by booting into fastboot and running these commands
"fastboot flash system system.img".
Now try and see if it works or not
rjcool1999 said:
If u can boot to fastboot I can help I guess
Click to expand...
Click to collapse
rjcool1999 said:
Okk lets start.......
1st go to fastboot and connect phone with PC and use minimal fastboot and adb to flash recovery on your device. Command "fastboot flash recovery twrp.img"(recovery.img must be renamed as twrp)
2nd type fastboot reboot-bootloader
3rd type exit.
Now phone will boot to bootloader, from bootloader go to recovery and wipe everything including data system cache dalvik cache internal memory external sd card(if inserted). Now flash lineage OS 14.1, wipe cache dalvik cache, flash open gapps pico 7.1(arm) and wipe cache dalvik cache again now reboot
---------- Post added at 09:58 AM ---------- Previous post was at 09:55 AM ----------
Now if u are unable to boot into recovery then last option is to extract the system.img from system.new.dat and flashing the system.img by booting into fastboot and running these commands
"fastboot flash system system.img".
Now try and see if it works or not
Click to expand...
Click to collapse
:cyclops: after the last step (3rd step), i go back to hboot then choose recovery, suddently my phone restarted and still can't enter recovery.
where do i find the system.new.dat ?? if u mean by extract it from Lineage ROM and rename the system.new.dat into system.img, i've done it.
and still, the phone won't boot into recovery or normal boot, phone still suddently turn off and on again.
sang6iru said:
where do i find the system.new.dat ?? if u mean by extract it from Lineage ROM and rename the system.new.dat into system.img, i've done it.
and still, the phone won't boot into recovery or normal boot, phone still suddently turn off and on again.
Click to expand...
Click to collapse
No no renaming it wont work. First u have to download Auto tool unpack repack from here https://forum.xda-developers.com/general/general/tool-auto-tool-unpack-repack-rom-t3278393.
Now extract the lineage os zip, u will get system.new.dat, file_contexts and system transfer list. Now open file_contexts with notepad++ and save it, choose the type as "All" and save the file, it should not be saved as a text file.
Now open the unpack-repack tool and copy system.new.dat, file_contexts(new one) and system transfer list to the input-dat folder. Now open the unpack tool and click on unpack, there u will get one file named as system.dat.img/system.img(.img is the format). Okk now the actual work begins follow my directions carefully.......
1st make sure u have htc usb drivers, universal adb drivers are installed on your PC.
2nd Download minimal fastboot and adb package from google.
3rd copy the system.dat.img/system.img file to minimal fastboot folder.
4th Boot your phone into fastboot mode and connect with your PC
5th Inside the minimal fastboot folder press shift and right click(mouse button), there u will see "open command prompt here" click on it.
6th Now in the command prompt type fastboot flash system system.img/system.dat.img
7th after the img file gets flashed type fastboot reboot, hope so your device will reboot
---------- Post added at 11:33 AM ---------- Previous post was at 11:30 AM ----------
If u face any problem ask me, will try to help you as soon as possible
---------- Post added at 11:33 AM ---------- Previous post was at 11:33 AM ----------
sang6iru said:
:cyclops: after the last step (3rd step), i go back to hboot then choose recovery, suddently my phone restarted and still can't enter recovery.
Click to expand...
Click to collapse
Maybe you should re-download twrp file from TWRP website
I couldn't find system.dat.img or system.img
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
when i search the unpack folder :
also, i've download lates twrp from twrp site, still can't boot into recovery. phone suddently turnoff .
Is :
(bootloader) battery-voltage: 0mV << means something for u?
sang6iru said:
I couldn't find system.dat.img or system.img

when i search the unpack folder :
when i search the unpack folder :

also, i've download lates twrp from twrp site, still can't boot into recovery. phone suddently turnoff .
Is :
(bootloader) battery-voltage: 0mV << means something for u?
Click to expand...
Click to collapse
No no the system.dat.img/system.img is not inside unpack-dat folder it is outside it
i didn't found in that too..
sang6iru said:
i didn't found in that too..
Click to expand...
Click to collapse
@bigsupersquid plz provide him with the system.img if possible
The hboot variables look like the battery is flat dead.
ROMs won't boot with no battery power, they reboot themselves without starting up.
Recovery might do the same, but it didn't used to.
You try a different usb cable to charge with? Usually mine go bad the other way, they still charge badly but lose data and won't talk to the phone, but could be bad cable.
I'm not sure if you can charge the phone in fastboot, might try leaving it plugged in a couple hours. Then do the getvar command with fastboot again and post that battery voltage it gives you.
Related
SFR - VODAP203, ROM and OTA update to 4.2.2 Sense 5, Hboot 1.72
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
banner by cypis
Stock ROM for HOX VODAP203 (SFR)
LOOKOUT ! Screens are not reflect of original ROM. Been tweaked by me :laugh:
Look of this ROM is the same than Original Sense.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it!
* I'm not a dev, I just want to share files I found which helped me..
*/
I decided to open this thread cause I spent a lot of time to find the files that I share with you today. I just hope it will help others users with same HOX config like me.
This is not an "HOW TO", just sharing files needed.
I wanted to update my HOX which config was:
Hboot 1.36
Version 1.29.163.13
and CID VODAP203.
and bring it to Android 4.2.2 and Sense 5, and bring Hbbot to 1.72.
Thanks and credits:
Special thanks to migascalp.
Original thread: http://www.forum-generationmobiles.net/t63139-rom-zip-stock-operateur
INSTRUCTIONS:
- First of all, nandroid backup and copy all your sd files on PC !
Starting from zero (1.29.163.13), I had to wipe all data and files on sd card, so you have been warned...
In download section, you'll find:
ROM SFR_3.14.163.27.zip
OTA OTA_ENDEAVOR_U_JB_50_S_Vodafone_FR_4.17.163.3-3.14.163.27_release_3328517hcgcnspavwggc5y.zip
Hbbot 1.72 firmware.zip
Copy ROM and OTA on sdcard.
1. Unlock your device and install Clockwork Recovery
2. Do a Nandroid backup! Copy all files on PC.
3. WIPE
4. Install the ROM by CWM (install zip on sdCard) don't forget flashing boot.img inside zip (fastboot flash boot boot.img, and fastboot erase cache)
5. Reboot - You're on original SFR 3.14.163.27
6. At this stage, screen is non responding, reboot in recovery by power+vol down.
7. Flash the OTA.zip in CWM
Reboot in fastboot usb and flash boot.img in OTA.zip
8. Reboot
9. You're in android 4.2.2 Sense 5....
Screen touch is working again.
After all is done, go in settings, about and updates and it will charge 3 upgrades (camera, Sense and other tweaks).
Let HOX installing them then reboot.
And voilà !
At this stage, there is no more OTA, so ROM is 4.17.163.3 Android 4.2.2 and Sense 5.
If you want to upgrade HBOOT:
Even with the .zip method you'll need to relock/unlock the bootloader. It's NOT flashable in
recovery. Create a new account at htcdev.
Here's how to use the zip:
1. fastboot oem lock
2. fastboot oem rebootRUU
3. fastboot flash zip firmware.zip (do several times if it fails)
4. fastboot flash unlocktoken Unlock_code.bin.
There are many tutos on "how to" flash ROM, upgrade Hbbot... here on HOX android section.
Direct download URLs:
ROM - SFR_3.14.163.27.zip
https://www.dropbox.com/s/y51eyvuoe3z78pc/SFR_3.14.163.27.zip
boot.img to flash with ROM
https://www.dropbox.com/s/za9d0dxt8u55z74/boot sfr314.img
http://www.sendspace.com/file/0j293m
MIRROR:
SFR_3.14.163.27.zip.001
http://www9.zippyshare.com/v/83751600/file.html
SFR_3.14.163.27.zip.002
http://www9.zippyshare.com/v/78478227/file.html
SFR_3.14.163.27.zip.003
http://www9.zippyshare.com/v/54634601/file.html
SFR_3.14.163.27.zip.004
http://www9.zippyshare.com/v/15721385/file.html
DL the four files then open 7file, combine the four files, you're done.
OTA_ENDEAVOR_U_JB_50_S_Vodafone_FR_4.17.163.3-3.14.163.27_release_3328517hcgcnspavwggc5y.zip
https://www.dropbox.com/s/w4z4qe5af....14.163.27_release_3328517hcgcnspavwggc5y.zip
MIRROR:
OTA_ENDEAVOR_U_JB_50_S_Vodafone_FR_4.17.163.3-3.14.163.27_release_3328517hcgcnspavwggc5y.zip.001
http://www26.zippyshare.com/v/65868450/file.html
OTA_ENDEAVOR_U_JB_50_S_Vodafone_FR_4.17.163.3-3.14.163.27_release_3328517hcgcnspavwggc5y.zip.002
http://www26.zippyshare.com/v/4628396/file.html
OTA_ENDEAVOR_U_JB_50_S_Vodafone_FR_4.17.163.3-3.14.163.27_release_3328517hcgcnspavwggc5y.zip.003
http://www26.zippyshare.com/v/31432235/file.html
DL the three files then open 7file, combine the three files, you're done.
boot.img to flash with OTA
https://www.dropbox.com/s/pklltu4k8bl982l/boot ota417.img
http://www.sendspace.com/file/om49c3
HBOOT - firmware.zip
https://www.dropbox.com/s/xd7bw1gpkota95v/firmware.zip
http://www22.zippyshare.com/v/99064813/file.html
Again: I'm not a dev and have very little time to myself everyday.
If I could help you, then the goal is reached.
In that event, Hit thanks
Have a good flash
Franky
Edit 14 01 2014: uploading new links in progress
My dropbox generates too much traffic, public links suspended
Sorry for that
Thanks Man and thanks too for Migascalp
bzhmobile said:
Thanks Man and thanks too for Migascalp
Click to expand...
Click to collapse
Héhé, Pour une fois que ça se fait dans ce sens, on ne va pas s'en priver.....
Respect for baby's owner...
See you
Franky
this does not work on my device.
I have assert error on CID checking...
neith00 said:
this does not work on my device.
I have assert error on CID checking...
Click to expand...
Click to collapse
More infos needed.
Reboot in bootloader, connect in fastboot usb mode
then
type
fastboot getvar all
Then copy paste result and report.
XDA is HUGE forum.
Don't forget to quote before you answer.
See you
Franky
fgth90 said:
More infos needed.
Reboot in bootloader, connect in fastboot usb mode
then
type
fastboot getvar all
Then copy paste result and report.
XDA is HUGE forum.
Don't forget to quote before you answer.
See you
Franky
Click to expand...
Click to collapse
Here is the report.
fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.36.0000
(bootloader) version-baseband: 5.1204.164D.30
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.163.27
(bootloader) serialno: HT242W131562
(bootloader) imei: 35918XXXXXXXX
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: VODAP203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3782mV
(bootloader) devpower: 49
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 4.735s
fgth90 said:
SFR - VODAP203, ROM and OTA update to 4.2.2 Sense 5, Hboot 1.72
3. fastboot flash zip firmware.zip (do several times if it fails)
Franky
Click to expand...
Click to collapse
What happends when its fails? I cant get to flash the firmware zip after resetRUU
neith00 said:
Here is the report.
fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.36.0000
(bootloader) version-baseband: 5.1204.164D.30
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.163.27
(bootloader) serialno: HT242W131562
(bootloader) imei: 35918XXXXXXXX
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: VODAP203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3782mV
(bootloader) devpower: 49
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 4.735s
Click to expand...
Click to collapse
hopeless12 said:
What happends when its fails? I cant get to flash the firmware zip after resetRUU
Click to expand...
Click to collapse
1rst zip is to flash in recovery.
As said before:
4. Install the ROM by CWM (install zip on sdCard) don't forget flashing boot.img inside zip (fastboot flash boot boot.img, and fastboot erase cache)
5. Reboot - You're on original SFR 3.14.163.27
If OTA does not work, then you have:
- to flash original recovery
- relock your phone
Then OTA will come by itself in normal update.
I can confirm that firmware.zip is the good one for CID VODAP203.
There's tutos here on onex forum which explain how to flash it.
Let me know if something's wrong.
See you and good luck
Franky
fgth90 said:
1rst zip is to flash in recovery.
As said before:
4. Install the ROM by CWM (install zip on sdCard) don't forget flashing boot.img inside zip (fastboot flash boot boot.img, and fastboot erase cache)
5. Reboot - You're on original SFR 3.14.163.27
If OTA does not work, then you have:
- to flash original recovery
- relock your phone
Then OTA will come by itself in normal update.
I can confirm that firmware.zip is the good one for CID VODAP203.
There's tutos here on onex forum which explain how to flash it.
Let me know if something's wrong.
See you and good luck
Franky
Click to expand...
Click to collapse
Ok i'll try
neith00 said:
Ok i'll try
Click to expand...
Click to collapse
So did this work for you?
See you
Franky
Your post here is the only close thing to my solution.
Please, kindly send me a private link of the SFR 3.14.163.27 RUU you uploaded to dropbox or any other working download link of the RUU, because the one stated in this page has been disabled due to too much traffic. My email is
[email protected]
Thanks
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 12:01 PM ---------- Previous post was at 11:55 AM ----------
Your post here is the only close thing to my solution.
Please, kindly send me a private link of the SFR 3.14.163.27 RUU you uploaded to dropbox or any other working download link of the RUU, because the one stated in this page has been disabled due to too much traffic. My email is
[email protected]
Thanks
Sent from my GT-I9000 using xda app-developers app
fgth90 said:
So did this work for you?
See you
Franky
Click to expand...
Click to collapse
Sorry but I did not had the time. and moreover it's my wife's phone
Michaelthx said:
Your post here is the only close thing to my solution.
Please, kindly send me a private link of the SFR 3.14.163.27 RUU you uploaded to dropbox or any other working download link of the RUU, because the one stated in this page has been disabled due to too much traffic. My email is
[email protected]
Thanks
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 12:01 PM ---------- Previous post was at 11:55 AM ----------
Your post here is the only close thing to my solution.
Please, kindly send me a private link of the SFR 3.14.163.27 RUU you uploaded to dropbox or any other working download link of the RUU, because the one stated in this page has been disabled due to too much traffic. My email is
[email protected]
Thanks
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Need to push the file on web and need some time for upload. I'm on it actually.
I'll give you link tomorrow, time to go to bed and let PC working alone...
It's not a RUU but a nandroid backup. So you'll have to restore it by CWM.
See you
Franky
neith00 said:
...moreover it's my wife's phone
Click to expand...
Click to collapse
Michaelthx said:
Your post here is the only close thing to my solution.
Please, kindly send me a private link of the SFR 3.14.163.27 RUU you uploaded to dropbox or any other working download link of the RUU, because the one stated in this page has been disabled due to too much traffic. My email is
[email protected]
Thanks
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Done...
Does a JB RUU exists for the VODAP203?
kempoki said:
Does a JB RUU exists for the VODAP203?
Click to expand...
Click to collapse
Yes but it's an ooooooold one
Google it 1.26.163.2, that's why CWM recovery is the best way to have last version of android and sense.
See you
Franky
Oh sorry, no, a JB one, no...didn't see that...
The problem is when I try to use an old RUU, it has a bootloader issue: error 140 bootloader version error
kempoki said:
The problem is when I try to use an old RUU, it has a bootloader issue: error 140 bootloader version error
Click to expand...
Click to collapse
You don't have to use RUU.
You can flash zip, use recovery and then update by OTA.
Why looking for RUU?
Hi,
I have a problem : I did all what you wrote (flashed the ROM with CWM, then the boot.img with fastboot), the phone boot correctly but I can't enter my PIN code. The touchscreen is not responding, all what I can do is turning the volume up or down.
I hope you can help me solve this issue.
Thx
Hello;
I turned my One X on after about a month of not using (got a nexus 5). I'm giving it to my dad.
It just boot loops, I have 20.6 SD rom with his stock kernal. I've wiped cache, factory reset, dalvik. Wiped via fastboot and reinstalled the kernal.
I DONT have the rom files on the SD Card any more and i get an error when I try to mount storage from CWM.
Any ideas It would be greatly appreciated as it's about time my dad got rid of his standard phone.
ben-fisher-bro said:
Hello;
I turned my One X on after about a month of not using (got a nexus 5). I'm giving it to my dad.
It just boot loops, I have 20.6 SD rom with his stock kernal. I've wiped cache, factory reset, dalvik. Wiped via fastboot and reinstalled the kernal.
I DONT have the rom files on the SD Card any more and i get an error when I try to mount storage from CWM.
Any ideas It would be greatly appreciated as it's about time my dad got rid of his standard phone.
Click to expand...
Click to collapse
post the result from command fastboot getvar all
The other thing is to instal Philz recovery and in recovery to mount the SD card. Copy your rom to SD card, flash boot.img, flash rom.
ben-fisher-bro said:
Hello;
I turned my One X on after about a month of not using (got a nexus 5). I'm giving it to my dad.
It just boot loops, I have 20.6 SD rom with his stock kernal. I've wiped cache, factory reset, dalvik. Wiped via fastboot and reinstalled the kernal.
I DONT have the rom files on the SD Card any more and i get an error when I try to mount storage from CWM.
Any ideas It would be greatly appreciated as it's about time my dad got rid of his standard phone.
Click to expand...
Click to collapse
Try to flash twrp recovery or phillz via fastboot and then the rom. And wipe fastboot cache
Sent from my EndeavorU using Tapatalk 4
and313 said:
Try to flash twrp recovery or phillz via fastboot and then the rom. And wipe fastboot cache
Sent from my EndeavorU using Tapatalk 4
Click to expand...
Click to collapse
I do9nt have access to transfer stuff to the phone. It doesn't let me!
ben-fisher-bro said:
I do9nt have access to transfer stuff to the phone. It doesn't let me!
Click to expand...
Click to collapse
Go in bootloader press volume down + power button and after this connect the phone to computer and run the command fastboot getvar all
Do you have fastboot command on your PC if no download from here
Thant said:
Go in bootloader press volume down + power button and after this connect the phone to computer and run the command fastboot getvar all
Do you have fastboot command on your PC if no download from here
Click to expand...
Click to collapse
C:\Fastboot>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.164.30H
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.771.9
(bootloader) serialno: HT23XW125***
(bootloader) imei: 359188043******
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3749mV
(bootloader) devpower: 27
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
ben-fisher-bro said:
C:\Fastboot>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.164.30H
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.771.9
(bootloader) serialno: HT23XW125***
(bootloader) imei: 359188043******
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3749mV
(bootloader) devpower: 27
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Ok Lock your bootloader if you unlocked him, in bootloader you must see LOCKED or RELOCKED this is importand.
Download this RUU_ENDEAVOR_U_ICS_40_H3G_UK_1.29.771.11 and install update to latest JB 4.2.2
or you can download Philz recovery and use the command fastboot flash recovery recovery.img
Report back
EDIT: if the first RUU not working you can try with this RUU_ENDEAVOR_U_ICS_40_S_H3G_UK_2.17.771.3
EDIT2: Strange you have too high hboot version for your main version
Thant said:
Ok Lock your bootloader if you unlocked him, in bootloader you must see LOCKED or RELOCKED this is importand.
Download this RUU_ENDEAVOR_U_ICS_40_H3G_UK_1.29.771.11 and install update to latest JB 4.2.2
or you can download Philz recovery and use the command fastboot flash recovery recovery.img
Report back
EDIT: if the first RUU not working you can try with this RUU_ENDEAVOR_U_ICS_40_S_H3G_UK_2.17.771.3
EDIT2: Strange you have too hicgh hboot version for your main version
Click to expand...
Click to collapse
I've flashed philz, but I still get a boot loop! I still cannot transfer files. AM I missing something?
ben-fisher-bro said:
I've flashed philz, but I still get a boot loop! I still cannot transfer files. AM I missing something?
Click to expand...
Click to collapse
Start the phone in bootloader and choice recovery inside you have option to mount SD car choise mount sd Card and connect the phone to computer wait 3-5 minutes and you will see the sd card ion your computer copy the rom of your choice and install the rom dont forget to flash the boot.img. I give you the RUU to go back to stock this is your other option.
Thant said:
Start the phone in bootloader and choice recovery inside you have option to mount SD car choise mount sd Card and connect the phone to computer wait 3-5 minutes and you will see the sd card ion your computer copy the rom of your choice and install the rom dont forget to flash the boot.img. I give you the RUU to go back to stock this is your other option.
Click to expand...
Click to collapse
I'm doing this but nothing is showing on my computer
ben-fisher-bro said:
I'm doing this but nothing is showing on my computer
Click to expand...
Click to collapse
Try different usb ports/cables...
ben-fisher-bro said:
I'm doing this but nothing is showing on my computer
Click to expand...
Click to collapse
try to lock the bootloader and run RUU in my links.
Update yor HTC drivers
Dont forget you have to wait a bit on phillz recovery (possibly twrp also) to mount the sd. Should take about a minute which is normal
Sent from my EndeavorU using Tapatalk 4
Send that phone to me,I will do that for you....
Gesendet von meinem HTC One X mit Tapatalk
manne48 said:
Send that phone to me,I will do that for you....
Gesendet von meinem HTC One X mit Tapatalk
Click to expand...
Click to collapse
Help him via teamviewer, easier then sending it off to somebody he doesn't know (not that you are not credible or anything) but i would not 'just' send my phone in
Yes,thats true,if he wants this he can send a mail.....
Gesendet von meinem HTC One X mit Tapatalk
Mr Hofs said:
Help him via teamviewer, easier then sending it off to somebody he doesn't know (not that you are not credible or anything) but i would not 'just' send my phone in
Click to expand...
Click to collapse
Better done this through Teamviewer.
Sent from my HTC One X using xda app-developers app
I tried to update my HTC One X from 4.0.4 to 4.1.1 by OTA. The phone would download the entire update (around 370 MB), then try to install it, but couldn't. This happened several times. Then I downloaded the OTA update zip file and copied it to my phone memory. But now, it wouldn't go into recovery mode (after pressing volume down and power and navigating to recovery). When I press on recovery, it would go to a black screen, showing a phone with an exclamatory sign over it. After some time (maybe 1 or 2 minutes) it would reboot to normal mode with 4.0.4.
So, I think the problem is my phone cannot simply enter recovery mode. Is there any way to install the update by commands through PC?
I'm not really a fan of custom ROMs. Only the stock ROM of JB 4.1.1 will do.
Thanks!
Try resetting your phone from the hboot. (You'll lose all data including apps and sdcard. So backup first)
Then try ota again.
Sent from my One X
athulele said:
Try resetting your phone from the hboot. (You'll lose all data including apps and sdcard. So backup first)
Then try ota again.
Sent from my One X
Click to expand...
Click to collapse
You mean factory reset? Did that. No improvement. Also I ran the RUU for stock ROM of ICS 4.0.4. Had to do that to unbrick it (long story, was trying to flash custom ROM. Was facing the same problem, couldn't enter recovery option). But still, same story, downloads update for 2 hours, then goes back to 4.0.4. I'm in deep **** man!
khalid_saad said:
You mean factory reset? Did that. No improvement. Also I ran the RUU for stock ROM of ICS 4.0.4. Had to do that to unbrick it (long story, was trying to flash custom ROM. Was facing the same problem, couldn't enter recovery option). But still, same story, downloads update for 2 hours, then goes back to 4.0.4. I'm in deep **** man!
Click to expand...
Click to collapse
Have you unlocked your bootloader?
If yes, I will directly give you instructions to update to 4.2.2
athulele said:
Have you unlocked your bootloader?
If yes, I will directly give you instructions to update to 4.2.2
Click to expand...
Click to collapse
I did, but again relocked to go to stock ROM to unbrick via RUU. I can unlock it again and I would appreciate if you tell me how to update to 4.2.2. But I'm afraid the process won't work if it involves going into recovery mode in the phone.
khalid_saad said:
I did, but again relocked to go to stock ROM to unbrick via RUU. I can unlock it again and I would appreciate if you tell me how to update to 4.2.2. But I'm afraid the process won't work if it involves going into recovery mode in the phone.
Click to expand...
Click to collapse
It does involve the recovery mode.
Can you tell me why it wouldn't work?
Sent from my One X
athulele said:
It does involve the recovery mode.
Can you tell me why it wouldn't work?
Sent from my One X
Click to expand...
Click to collapse
Like I said earlier, when I go to bootloader (by holding volume down and power) and then select recovery from the options, a black screen comes with an android photo in the middle, with an exclamatory sign above it. After a couple of minutes, the screen disappears and the phone is restarted. That's what happens every time, I don't know why.
khalid_saad said:
Like I said earlier, when I go to bootloader (by holding volume down and power) and then select recovery from the options, a black screen comes with an android photo in the middle, with an exclamatory sign above it. After a couple of minutes, the screen disappears and the phone is restarted. That's what happens every time, I don't know why.
Click to expand...
Click to collapse
That's not a problem. What you're seeing is the Stock Recovery from HTC. As far as I know, you can't flash stuff from HTC's recovery.
Give me the output of 'fastboot getvar all'
And also while pasting the output, hide your IMEI and Serial No. it may be used for bad purposes by bad people.
athulele said:
That's not a problem. What you're seeing is the Stock Recovery from HTC. As far as I know, you can't flash stuff from HTC's recovery.
Give me the output of 'fastboot getvar all'
And also while pasting the output, hide your IMEI and Serial No. it may be used for bad purposes by bad people.
Click to expand...
Click to collapse
I found an article in the internet telling that if I copy the OTA update .zip file in my phone's memory, then go to recovery and select that file for update, it will update from 4.0.4 to 4.1.1. Sorry I forgot the link, so can't give you the reference.
Anyway, here is the output of 'fastboot getvar all':
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.12.0000
(bootloader) version-baseband: 2.1204.135.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.17.401.2
(bootloader) serialno: ************
(bootloader) imei: ***************
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ461****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3832mV
(bootloader) devpower: 51
(bootloader) partition-layout: None
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.810s
khalid_saad said:
I found an article in the internet telling that if I copy the OTA update .zip file in my phone's memory, then go to recovery and select that file for update, it will update from 4.0.4 to 4.1.1. Sorry I forgot the link, so can't give you the reference.
Anyway, here is the output of 'fastboot getvar all':
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.12.0000
(bootloader) version-baseband: 2.1204.135.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.17.401.2
(bootloader) serialno: ************
(bootloader) imei: ***************
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ461****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3832mV
(bootloader) devpower: 51
(bootloader) partition-layout: None
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.810s
Click to expand...
Click to collapse
Cool dude! You have a s-off deivce!
Anyway, Backup ALL (Apps, contacts, sdcard) data before you start with the following steps -
1. Keep your bootloader LOCKED.
2. Download this firmware and place it in your fastboot folder. Also download the stock ROM and place it on your device.
3. reboot your phone into fastboot mode
4. Through cmd - fastboot oem rebootRUU
5.You'll have a black screen on the device
6. Just to be sure, flash the firmware zip twice while in RUU mode. (fastboot flash zip firmware.zip)
7. Now go back to fastboot mode ( Power and volume combo)
8. Unlock your bootloader ( please refer HTCDev for instructions)
9. Flash this recovery (fastboot flash recovery recovery.img)
10. Extract the boot.img from the Stock ROM zip and flash it through fastboot (fastboot flash boot boot.img)
11. Go into the recovery. Do a Factory Reset.
12. locate the stock rom and flash it. (if it was erased while unlocking the bootloader, place it again)
13. now reboot
14. If all goes well, you'll boot into stock 4.2.2!
15. if you want to receive further OTA updates (if any)from hTC , flash this recovery.
Hope I helped! Feel free to ask any doubt you have!
athulele said:
Cool dude! You have a s-off deivce!
Anyway, Backup ALL (Apps, contacts, sdcard) data before you start with the following steps -
1. Keep your bootloader LOCKED.
2. Download this firmware and place it in your fastboot folder. Also download the stock ROM and place it on your device.
3. reboot your phone into fastboot mode
4. Through cmd - fastboot oem rebootRUU
5.You'll have a black screen on the device
6. Just to be sure, flash the firmware zip twice while in RUU mode. (fastboot flash zip firmware.zip)
7. Now go back to fastboot mode ( Power and volume combo)
8. Unlock your bootloader ( please refer HTCDev for instructions)
9. Flash this recovery (fastboot flash recovery recovery.img)
10. Extract the boot.img from the Stock ROM zip and flash it through fastboot (fastboot flash boot boot.img)
11. Go into the recovery. Do a Factory Reset.
12. locate the stock rom and flash it. (if it was erased while unlocking the bootloader, place it again)
13. now reboot
14. If all goes well, you'll boot into stock 4.2.2!
15. if you want to receive further OTA updates (if any)from hTC , flash this recovery.
Hope I helped! Feel free to ask any doubt you have!
Click to expand...
Click to collapse
You are freaking awesome dude! I love you!!!!!!!! :laugh:
Please help it is the third day i have been stuck.
I have plowed through past posts and tried endless fixes but I am still stuck
I am about to throw my HTC One X out the window.
I have a problem flashing img file each time my PC says 'file is corrupted'
I will include this as it may help
C:\WINDOWS\system32>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.72.0000
(bootloader) version-baseband: 5.1204.167.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.401.4
(bootloader) serialno: SH28MW105805
(bootloader) imei: 353995055058055
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3644mV
(bootloader) devpower: 1
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
Could somebody please help Thanks
sorojim said:
Please help it is the third day i have been stuck.
I have plowed through past posts and tried endless fixes but I am still stuck
I am about to throw my HTC One X out the window.
I have a problem flashing img file each time my PC says 'file is corrupted'
I will include this as it may help
C:\WINDOWS\system32>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.72.0000
(bootloader) version-baseband: 5.1204.167.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.401.4
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3644mV
(bootloader) devpower: 1
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
Could somebody please help Thanks
Click to expand...
Click to collapse
first delete your S/N and IMEI. Second little bit more explenation will be good what IMG what you want to do with the phone are you have custom recovery or you are with stock rom and recovery?
Thant said:
first delete your S/N and IMEI. Second little bit more explenation will be good what IMG what you want to do with the phone are you have custom recovery or you are with stock rom and recovery?
Click to expand...
Click to collapse
Hello Thant
I have been trying to install CynanenMod
but now I find I can not flash :
the fastboot file CMD sas was good but it is can not be seen on the phone sd
boot.img and recovery.img (I put full name when I flash) my PC says 'files corrupted' even if I get them from different sources.
I have: recovery-clockwork-touch-5.8.4.0-endeavoru installed.
I did not make a back up ( I Know ) so am stuck
THX for your help
sorojim said:
Hello Thant
I have been trying to install CynanenMod
but now I find I can not flash :
the fastboot file CMD sas was good but it is can not be seen on the phone sd
boot.img and recovery.img (I put full name when I flash) my PC says 'files corrupted' even if I get them from different sources.
I have: recovery-clockwork-touch-5.8.4.0-endeavoru installed.
I did not make a back up ( I Know ) so am stuck
THX for your help
Click to expand...
Click to collapse
wich CM11 or CM10.2. Now flash philz recovery 5.15.9 then mount sd card copy new rom to your sd card after this take the boot.img from your rom archive and flash it via fastboot. But if you want to flash CM11 you need latest recovery and after all procedure up after finish with sd card install latest philz recovery becouse in latest philz recovery sd card mountin not work but in 5.15.9 work great
you must to use boot.img from rom archive every time you flash new rom and wipe everithyng except sd card second is if you flash different roms
Thant said:
wich CM11 or CM10.2. Now flash philz recovery 5.15.9 then mount sd card copy new rom to your sd card after this take the boot.img from your rom archive and flash it via fastboot. But if you want to flash CM11 you need latest recovery and after all procedure up after finish with sd card install latest philz recovery becouse in latest philz recovery sd card mountin not work but in 5.15.9 work great
you must to use boot.img from rom archive every time you flash new rom and wipe everithyng except sd card second is if you flash different roms
Click to expand...
Click to collapse
I just downloaded ' fastboot_flash_recovery_philz_touch_6.47.3-a110.img ' could not find ' philz recovery 5.15.9 '
and get 'The disc image file is corrupted' when I flash in CMD.
sorojim said:
I just downloaded ' fastboot_flash_recovery_philz_touch_6.47.3-a110.img ' could not find ' philz recovery 5.15.9 '
and get 'The disc image file is corrupted' when I flash in CMD.
Click to expand...
Click to collapse
Is it a fault on my PC and could it be patched or adjusted
Thanks
sorojim said:
Is it a fault on my PC and could it be patched or adjusted
Thanks
Click to expand...
Click to collapse
download THIS fastboot and extract it to c:\fastboot folder after this download this RECOVERY PHILZ 5.15.9 and take the recovery.img inside from arhive and place in c:\fastboot directory then open cmd and type fastboot devices you must see your s/n your bootloader must be unlocked then type fastboot flash recovery recovery.img
Report back
Report back[/QUOTE]
Hi Thant
We are almost there
I did as you said and everything loaded (I'm so happy)
the only problem now is I get the message ' Unfortunatley the setup wizard has stopped '
so I press OK and the message pops up again and again so I can't setup the phone
I loaded CyanogenMod 10.2.1 stable
Cheers for your help
sorojim said:
Report back
Click to expand...
Click to collapse
Hi Thant
We are almost there
I did as you said and everything loaded (I'm so happy)
the only problem now is I get the message ' Unfortunatley the setup wizard has stopped '
so I press OK and the message pops up again and again so I can't setup the phone
I loaded CyanogenMod 10.2.1 stable
Cheers for your help[/QUOTE]
change the rom to CM11 or sense some newer rom where have support leave 10.2, but first copy the new rom to sd card after this flash latest CWM, PHILZ or TWRP2.7 and flash any rom you like it
This ' Unfortunatley the setup wizard has stopped ' is because of rom.
Are you do a full wipe except sd crad from recovery before install the rom
Thant said:
Hi Thant
We are almost there
I did as you said and everything loaded (I'm so happy)
the only problem now is I get the message ' Unfortunatley the setup wizard has stopped '
so I press OK and the message pops up again and again so I can't setup the phone
I loaded CyanogenMod 10.2.1 stable
Cheers for your help
Click to expand...
Click to collapse
change the rom to CM11 or sense some newer rom where have support leave 10.2, but first copy the new rom to sd card after this flash latest CWM, PHILZ or TWRP2.7 and flash any rom you like it
This ' Unfortunatley the setup wizard has stopped ' is because of rom.
Are you do a full wipe except sd crad from recovery before install the rom[/QUOTE]
Actually I just updated my gapps and all is good
Thanks a lot mate if your ever in Paris PM me and I'll buy you a pint
Cheers
sorojim said:
Actually I just updated my gapps and all is good
Thanks a lot mate if your ever in Paris PM me and I'll buy you a pint
Cheers
Click to expand...
Click to collapse
no problem
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
hi...i need help!i was flashing an ruu on my htc one X and in the middle of the update it says error 152 and the phone stuck on htc silver logo....i can't get into bootloader but fastboot commands works...can anyone help me???
booster70 said:
hi...i need help!i was flashing an ruu on my htc one X and in the middle of the update it says error 152 and the phone stuck on htc silver logo....i can't get into bootloader but fastboot commands works...can anyone help me???
Click to expand...
Click to collapse
Give the result from command fastboot getvar version-main
Thant said:
Give the result from command fastboot getvar version-main
Click to expand...
Click to collapse
version-main: 4.19.708.2
booster70 said:
version-main: 4.19.708.2
Click to expand...
Click to collapse
No RUU for your base it is to newer you must restore nandroid backup if you want stock rom or install custom rom for this you receive Error 152.
Thant said:
No RUU for your base it is to newer you must restore nandroid backup if you want stock rom or install custom rom for this you receive Error 152.
Click to expand...
Click to collapse
Can you please give me a link which describe the way i can do it please??
booster70 said:
Can you please give me a link which describe the way i can do it please??
Click to expand...
Click to collapse
This is the PHILZ 5.15.9 download take the recovery.img from adchive and paste it in you fastboot folder. After this go in bootloader choice fastboot and connect the phone to computer run the command fastboot flash recovery recovery.img and then fastboot erase cache then go in recovery. For nandroid backup look in general section
i will try and tell u...thks
Thant said:
download take the recovery.img from adchive and paste it in you fastboot folder. After this go in bootloader choice fastboot and connect the phone to computer run the command fastboot flash recovery recovery.img and then fastboot erase cache then go in recovery. For nandroid backup look in general section
Click to expand...
Click to collapse
i tried to flash the recovery and it failed...its says
Code:
C:\adb>fastboot flash recovery recovery.img
sending 'recovery' (8050 KB)...
OKAY [ 1.253s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 1.465s
booster70 said:
i tried to flash the recovery and it failed...its says
Code:
C:\adb>fastboot flash recovery recovery.img
sending 'recovery' (8050 KB)...
OKAY [ 1.253s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 1.465s
Click to expand...
Click to collapse
are you unlocked your bootloader via HTCDEV.COM? If no and you have warranty send it for repair if no warrant unlock it and flash the recovery
Thant said:
are you unlocked your bootloader via HTCDEV.COM? If no and you have warranty send it for repair if no warrant unlock it and flash the recovery
Click to expand...
Click to collapse
No warranty....i will try to unlock it and feed back
booster70 said:
No warranty....i will try to unlock it and feed back
Click to expand...
Click to collapse
i tried to unlock bootloader but when i do fastboot oem get_identifier_token it shows nothing
booster70 said:
i tried to unlock bootloader but when i do fastboot oem get_identifier_token it shows nothing
Click to expand...
Click to collapse
copy the command exactly like in htcdev.com copy and paste in your cmd windows try you must unlock your bootloader
when you run the command you must to see numbers in your CMD window
Thant said:
copy the command exactly like in htcdev.com copy and paste in your cmd windows try you must unlock your bootloader
when you run the command you must to see numbers in your CMD window
Click to expand...
Click to collapse
i did exactly like you said but its the same nothing appears
booster70 said:
i did exactly like you said but its the same nothing appears
Click to expand...
Click to collapse
try different cable or different port or different windows
if you can't unlock the bootloader we can't do anything
Thant said:
try different cable or different port or different windows
if you can't unlock the bootloader we can't do anything
Click to expand...
Click to collapse
i tried with a toolkit and i have unlocked it....but i can't flash the recovery it always fails!then i have done
Code:
fastboot oem boot
and it boot in bootloader but the only option is ruu,no recovery no fastboot,none of the things that are there normally....i see my hboot version and it was 0.95 i want to ask if i tried and flash another hboot would it work???the ruu i was flashing and have that problem is RUU_ENDEAVOR_U_ICS_40_HTC_Europe_1.29.401.11_Radio_1.1204.105.14_release_260491_signed
i downloaded another jb ruu and they all refused to flash..so what can i do??
booster70 said:
i tried with a toolkit and i have unlocked it....but i can't flash the recovery it always fails!then i have done
Code:
fastboot oem boot
and it boot in bootloader but the only option is ruu,no recovery no fastboot,none of the things that are there normally....i see my hboot version and it was 0.95 i want to ask if i tried and flash another hboot would it work???the ruu i was flashing and have that problem is RUU_ENDEAVOR_U_ICS_40_HTC_Europe_1.29.401.11_Radio_1.1204.105.14_release_260491_signed
i downloaded another jb ruu and they all refused to flash..so what can i do??
Click to expand...
Click to collapse
please post result from command fastboot getvar all and delete your S/N and IMEI from the info!?!? You can't be with hboot 0.95 and main version 4.19.708.2 that is inposible and post a picture on your bootloader
and you must to be in fastboot to flash recovery volume down + power button and you are in bootloader take a picture and post it here after this give the info from the command and we will see what will do
Thant said:
please post result from command fastboot getvar all and delete your S/N and IMEI from the info!?!? You can't be with hboot 0.95 and main version 4.19.708.2 that is inposible and post a picture on your bootloader
and you must to be in fastboot to flash recovery volume down + power button and you are in bootloader take a picture and post it here after this give the info from the command and we will see what will do
Click to expand...
Click to collapse
C:\adb>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 0.95.
(bootloader) version-baseband: 1.1204.
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.708.2
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ461****
(bootloader) cidnum: None
(bootloader) battery-status: good
(bootloader) battery-voltage: 4068mV
(bootloader) devpower: 94
(bootloader) partition-layout: None
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.822s
and here is the image
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.casimages.com/img.php?i=140830083217934400.jpg
booster70 said:
C:\adb>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 0.95.
(bootloader) version-baseband: 1.1204.
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.708.2
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ461****
(bootloader) cidnum: None
(bootloader) battery-status: good
(bootloader) battery-voltage: 4068mV
(bootloader) devpower: 94
(bootloader) partition-layout: None
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.822s
and here is the image
http://www.casimages.com/img.php?i=140830083217934400.jpg
Click to expand...
Click to collapse
Are your bootloader say S-OFF???? And are you Endeavoru XE or PVT??? you can see this in your bootloader
If the answare on the 1 question is YES then download this RUU relock the bootloader and run the RUU as administrator
but if the answare on 2 question is XE then we must to do something before run RUU
Thant said:
Are your bootloader say S-OFF???? And are you Endeavoru XE or PVT??? you can see this in your bootloader
If the answare on the 1 question is YES then download this RUU relock the bootloader and run the RUU as administrator
but if the answare on 2 question is XE then we must to do something before run RUU
Click to expand...
Click to collapse
I solved the problem by doing
fastboot erase cache
fastboto oem rebootRUU
fastboot flash zip rom.zip
i used the rom.zip inside the ruu i was trying to flash and it passed now the phone turn on but there is another problem.the touhscreen is not responding
booster70 said:
I solved the problem by doing
fastboot erase cache
fastboto oem rebootRUU
fastboot flash zip rom.zip
i used the rom.zip inside the ruu i was trying to flash and it passed now the phone turn on but there is another problem.the touhscreen is not responding
Click to expand...
Click to collapse
I know answare on my question your hboot is too old must be newr. Please answare on my question
And now what version is your hboot the same 0.95