[Q] Error 152 during ruu update - HTC One X

hi...i need help!i was flashing an ruu on my htc one X and in the middle of the update it says error 152 and the phone stuck on htc silver logo....i can't get into bootloader but fastboot commands works...can anyone help me???

booster70 said:
hi...i need help!i was flashing an ruu on my htc one X and in the middle of the update it says error 152 and the phone stuck on htc silver logo....i can't get into bootloader but fastboot commands works...can anyone help me???
Click to expand...
Click to collapse
Give the result from command fastboot getvar version-main

Thant said:
Give the result from command fastboot getvar version-main
Click to expand...
Click to collapse
version-main: 4.19.708.2

booster70 said:
version-main: 4.19.708.2
Click to expand...
Click to collapse
No RUU for your base it is to newer you must restore nandroid backup if you want stock rom or install custom rom for this you receive Error 152.

Thant said:
No RUU for your base it is to newer you must restore nandroid backup if you want stock rom or install custom rom for this you receive Error 152.
Click to expand...
Click to collapse
Can you please give me a link which describe the way i can do it please??

booster70 said:
Can you please give me a link which describe the way i can do it please??
Click to expand...
Click to collapse
This is the PHILZ 5.15.9 download take the recovery.img from adchive and paste it in you fastboot folder. After this go in bootloader choice fastboot and connect the phone to computer run the command fastboot flash recovery recovery.img and then fastboot erase cache then go in recovery. For nandroid backup look in general section

i will try and tell u...thks

Thant said:
download take the recovery.img from adchive and paste it in you fastboot folder. After this go in bootloader choice fastboot and connect the phone to computer run the command fastboot flash recovery recovery.img and then fastboot erase cache then go in recovery. For nandroid backup look in general section
Click to expand...
Click to collapse
i tried to flash the recovery and it failed...its says
Code:
C:\adb>fastboot flash recovery recovery.img
sending 'recovery' (8050 KB)...
OKAY [ 1.253s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 1.465s

booster70 said:
i tried to flash the recovery and it failed...its says
Code:
C:\adb>fastboot flash recovery recovery.img
sending 'recovery' (8050 KB)...
OKAY [ 1.253s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 1.465s
Click to expand...
Click to collapse
are you unlocked your bootloader via HTCDEV.COM? If no and you have warranty send it for repair if no warrant unlock it and flash the recovery

Thant said:
are you unlocked your bootloader via HTCDEV.COM? If no and you have warranty send it for repair if no warrant unlock it and flash the recovery
Click to expand...
Click to collapse
No warranty....i will try to unlock it and feed back

booster70 said:
No warranty....i will try to unlock it and feed back
Click to expand...
Click to collapse
i tried to unlock bootloader but when i do fastboot oem get_identifier_token it shows nothing

booster70 said:
i tried to unlock bootloader but when i do fastboot oem get_identifier_token it shows nothing
Click to expand...
Click to collapse
copy the command exactly like in htcdev.com copy and paste in your cmd windows try you must unlock your bootloader
when you run the command you must to see numbers in your CMD window

Thant said:
copy the command exactly like in htcdev.com copy and paste in your cmd windows try you must unlock your bootloader
when you run the command you must to see numbers in your CMD window
Click to expand...
Click to collapse
i did exactly like you said but its the same nothing appears

booster70 said:
i did exactly like you said but its the same nothing appears
Click to expand...
Click to collapse
try different cable or different port or different windows
if you can't unlock the bootloader we can't do anything

Thant said:
try different cable or different port or different windows
if you can't unlock the bootloader we can't do anything
Click to expand...
Click to collapse
i tried with a toolkit and i have unlocked it....but i can't flash the recovery it always fails!then i have done
Code:
fastboot oem boot
and it boot in bootloader but the only option is ruu,no recovery no fastboot,none of the things that are there normally....i see my hboot version and it was 0.95 i want to ask if i tried and flash another hboot would it work???the ruu i was flashing and have that problem is RUU_ENDEAVOR_U_ICS_40_HTC_Europe_1.29.401.11_Radio_1.1204.105.14_release_260491_signed
i downloaded another jb ruu and they all refused to flash..so what can i do??

booster70 said:
i tried with a toolkit and i have unlocked it....but i can't flash the recovery it always fails!then i have done
Code:
fastboot oem boot
and it boot in bootloader but the only option is ruu,no recovery no fastboot,none of the things that are there normally....i see my hboot version and it was 0.95 i want to ask if i tried and flash another hboot would it work???the ruu i was flashing and have that problem is RUU_ENDEAVOR_U_ICS_40_HTC_Europe_1.29.401.11_Radio_1.1204.105.14_release_260491_signed
i downloaded another jb ruu and they all refused to flash..so what can i do??
Click to expand...
Click to collapse
please post result from command fastboot getvar all and delete your S/N and IMEI from the info!?!? You can't be with hboot 0.95 and main version 4.19.708.2 that is inposible and post a picture on your bootloader
and you must to be in fastboot to flash recovery volume down + power button and you are in bootloader take a picture and post it here after this give the info from the command and we will see what will do

Thant said:
please post result from command fastboot getvar all and delete your S/N and IMEI from the info!?!? You can't be with hboot 0.95 and main version 4.19.708.2 that is inposible and post a picture on your bootloader
and you must to be in fastboot to flash recovery volume down + power button and you are in bootloader take a picture and post it here after this give the info from the command and we will see what will do
Click to expand...
Click to collapse
C:\adb>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 0.95.
(bootloader) version-baseband: 1.1204.
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.708.2
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ461****
(bootloader) cidnum: None
(bootloader) battery-status: good
(bootloader) battery-voltage: 4068mV
(bootloader) devpower: 94
(bootloader) partition-layout: None
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.822s
and here is the image
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.casimages.com/img.php?i=140830083217934400.jpg

booster70 said:
C:\adb>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 0.95.
(bootloader) version-baseband: 1.1204.
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.708.2
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ461****
(bootloader) cidnum: None
(bootloader) battery-status: good
(bootloader) battery-voltage: 4068mV
(bootloader) devpower: 94
(bootloader) partition-layout: None
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.822s
and here is the image
http://www.casimages.com/img.php?i=140830083217934400.jpg
Click to expand...
Click to collapse
Are your bootloader say S-OFF???? And are you Endeavoru XE or PVT??? you can see this in your bootloader
If the answare on the 1 question is YES then download this RUU relock the bootloader and run the RUU as administrator
but if the answare on 2 question is XE then we must to do something before run RUU

Thant said:
Are your bootloader say S-OFF???? And are you Endeavoru XE or PVT??? you can see this in your bootloader
If the answare on the 1 question is YES then download this RUU relock the bootloader and run the RUU as administrator
but if the answare on 2 question is XE then we must to do something before run RUU
Click to expand...
Click to collapse
I solved the problem by doing
fastboot erase cache
fastboto oem rebootRUU
fastboot flash zip rom.zip
i used the rom.zip inside the ruu i was trying to flash and it passed now the phone turn on but there is another problem.the touhscreen is not responding

booster70 said:
I solved the problem by doing
fastboot erase cache
fastboto oem rebootRUU
fastboot flash zip rom.zip
i used the rom.zip inside the ruu i was trying to flash and it passed now the phone turn on but there is another problem.the touhscreen is not responding
Click to expand...
Click to collapse
I know answare on my question your hboot is too old must be newr. Please answare on my question
And now what version is your hboot the same 0.95

Related

Error 132 when using RUU

Right now I'm facing problem to update to stock using RUU.
My version is 2.17.707.3 so I dowload from HTCRUU the file named RUU_ENDEAVOR_U_ICS_40_S_hTC_Asia_WWE_2.17.707.3_Radio_2.1204.135.20_release_278245_signed.exe, but after some operations (reboot to bootloader, etc) gives me an 132 error saying: "Signature error". Why is that?
Also I found other RUU file named RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed.exe, Can i use just this to update to JB?
Before you proceed, check the actual version no. Go to bootloader in fastboot mode, do command fastboot getvar version-main then you will know which RUU is correct for you.
Example, mine is 3.14.707.24, then RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Ra dio_5.1204.162.29_release_296434_signed.exe is the correct RUU for my device.
Code:
D:\HTC\fastboot>fastboot getvar version-main
version-main: 3.14.707.24
finished. total time: -0.000s
D:\HTC\fastboot>
I already do that. That's why I know how version to use.
Then follow this procedure to flash the RUU
1) Boot to bootloader in fastboot mode, relock your bootloader - fastboot oem lock
2) Still in fastboot mode, run the RUU follow the updater instruction until it finish.
Important points relock bootloader & run ruu in fastboot
I already do that too. The problem is that after 1 minute, it says ERROR 132, "Signature Problem"
ERROR 132, "Signature Problem" usually refer to unlocked bootloader. As you said you did relock the bootloader, I have no idea. Maybe someone else can assist you on this.
Quick question. After flash the stock recovery is mandatory to erase the cache using fastboot erase cache?
After relock the bootloader, can I flash the stock recovery?
Not mandatory but recommended.
You can't flash stock recovery or stock boot.img after you relock the bootloader.
If you need to flash those to you device, do it before you relock the bootloader.
ckpv5 said:
Not mandatory but recommended.
You can't flash stock recovery or stock boot.img after you relock the bootloader.
If you need to flash those to you device, do it before you relock the bootloader.
Click to expand...
Click to collapse
Im also stuck with this issue! Error 132!!! I cant flash my HOX+ back to stock and I need toO!!! hhheelp!!
i have htc one x 4.0.3
fastboot getvar version-main
device >
1.29.401.12
total time: 0.010s
The bootloader is relocked and the Hboot is 0.95
tried to upgrade to JB 4.1 with RUU_ENDEAVOR_U_JB_45_S_hTC_EUROPE_WWE_3.14.707.24_Ra dio_5.1204.162.29_release_296434_signed.exe but wont finish due to a 132 signature problem error...
What are the steps i have to do ?
best regards
leddra2k said:
Im also stuck with this issue! Error 132!!! I cant flash my HOX+ back to stock and I need toO!!! hhheelp!!
Click to expand...
Click to collapse
Ok, just to ask, this is HTC One X section, and in quote i can see that you have HTC One X +? Did you download RUU for HTC one X or HTC One X +?
Because guide for back to stock with RUU is just like previous members wrote... go into fastboot, relock bootloader, run RUU (with administrators rights in vista or win7)..
And for the others: http://forum.xda-developers.com/showthread.php?t=1859714
Stock OTA and RUU: http://androidfiles.org/ruu/?dir=Endeavor
IMPORTANT from the link:
Get the RUU file required for your device:
Make sure that USB debugging is enabled (Settings/Developer options). In order to determine which ruu file you require, boot your device into bootloader mode (Power off and then restart device by holding Power and Volume Down button together). Connect to pc via USB and check that device shows FASTBOOT USB on screen. Enter the following command in command prompt:
Code: fastboot getvar version-main
If for example this command returns the value 1.29.401.x then you need to use that file or you can use a higher numbered file from the same region eg 2.17.401.x. NOTE: You can't use a lower numbered file eg 1.26.401.x and you also can't use a file from a different region eg 2.17.707.x.:
PROCESS :
1. Boot your phone to fastboot mode by holding power+vol down button for 10 secs..(if your phone keeps restarting in normal phone mode, go to Setting>Power and untick Fast boot)
2. Plug your phone into your PC and open a Command Prompt.
(windows XP - Click Start > Run > type CMD in box then press OK
(Windows 7 - Click Start > type CMD in search box then press Enter)
3. cd to the location of your fastboot files folder
4. Relock bootloader - type command:
Code: fastboot oem lock
The phone will then restart into fastboot again showing "RELOCKED"
6. On your pc run the RUU (vista and win7 run as administrator) that you downloaded earlier, follow the steps as prompted and patiently wait for it to finish.
REMEMBER your phone should be charged ABOVE 50% (Full battery is advice) AND if the RUU or restore is INTERRUPTED 4 any reason during restore your
phone will be PERMANENTLY BRICKED..
I have successfuly installed the rom 4.1 from insertcoin i have update the hboot and the right firmware. Thebproblem im facing is the phone keeps rebooting, the installation of the rom ended with no errors... i have full wiped the phone formated the cache... amy idea how to fix the auto reboot? Thanks
armandino said:
I have successfuly installed the rom 4.1 from insertcoin i have update the hboot and the right firmware. Thebproblem im facing is the phone keeps rebooting, the installation of the rom ended with no errors... i have full wiped the phone formated the cache... amy idea how to fix the auto reboot? Thanks
Click to expand...
Click to collapse
It's because you didn't flash the correct boot.img or you didn't full wipe your device.. start over and follow these steps:
1. flash boot.img from rom.zip and then fastboot erase cache
2. Go to recovery and flash this script : http://d-h.st/B2K
3. Flash rom.zip
4. Reboot
PS: From next time, please don't highjack other people's thread by asking questions not related to the topic! If you need further help, open a new topic!
Please help. I am getting
fastboot getvar version-main
version-main:
finished. total time: 0.230s
ladylane100 said:
Please help. I am getting
fastboot getvar version-main
version-main:
finished. total time: 0.230s
Click to expand...
Click to collapse
try with fastboot getvar all
F:\>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-baseband: 1.46.40.0721
(bootloader) version-cpld: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) product: a11_chl
(bootloader) platform: hTCBmsm8226
(bootloader) cidnum: SPCS_002
(bootloader) battery-status: good
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 6a60e19e
(bootloader) gencheckpt: 0
ladylane100 said:
F:\>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-baseband: 1.46.40.0721
(bootloader) version-cpld: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) product: a11_chl
(bootloader) platform: hTCBmsm8226
(bootloader) cidnum: SPCS_002
(bootloader) battery-status: good
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 6a60e19e
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Strange I think you are not with ONE X international we never have this this radio 1.46.40.0721 and for first time I see this CID SPCS_002
Boas pro htc m9 3.35.401.32 qual é o ruu de nougat correto pra instalar pode me ajudar ?
(bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) imei: removed by me
(bootloader) version-main: 3.36.709.3
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U11440792_97.00.51203G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: 11111111
!!!!!!!!!!!!!!!!!!I AM ALSO GETTING ERROR 132 WITH HTC M9 RUU DOWNLOADED FROM HTC OFFICIAL SITE...!!!!!!!!!!!!!!!!!!
RUU_HIMA_UL_N70_SENSE80_ATT_MR_NA_Gen_Unlock_4.30.617.12.exe

Htc One M9 canno't get in download mode

Hi all, I have a big problem with my htc one m9. Today I was trying to get in recovery mode but the phone was rebooting itself, so I tryed to flash a ruu (via oem rebootRUU) but maybe something went wrong (hboot pre-update) and now the phone reboots when I try to enter in download mode via bootloader and also I canno't enter in "oem rebootRUU".
I have S-OFF.
Someone can help me? Thanks..
Insaniity said:
Hi all, I have a big problem with my htc one m9. Today I was trying to get in recovery mode but the phone was rebooting itself, so I tryed to flash a ruu (via oem rebootRUU) but maybe something went wrong (hboot pre-update) and now the phone reboots when I try to enter in download mode via bootloader and also I canno't enter in "oem rebootRUU".
I have S-OFF.
Someone can help me? Thanks..
Click to expand...
Click to collapse
can you provide more information please, (usually I'd ask for a "fastboot getvar all" excluding IMEI and s/n), but since you can't get to download mode, can we have some screenshots of bootloader, a copy/paste of your command prompt output when typing the fastboot commands
and most important, what were you trying to flash (link to thread and file please)
nkk71 said:
can you provide more information please, (usually I'd ask for a "fastboot getvar all" excluding IMEI and s/n), but since you can't get to download mode, can we have some screenshots of bootloader, a copy/paste of your command prompt output when typing the fastboot commands
and most important, what were you trying to flash (link to thread and file please)
Click to expand...
Click to collapse
I can do all command on bootloader so :
C:\minisdk>fastboot getvar all
(bootloader) version: 0.5
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:cache: 0x14000000
(bootloader) partition-type:userdata: ext4
(bootloader) partition-size:userdata: 0x5e0000000
(bootloader) partition-type:system: ext4
(bootloader) partition-size:system: 0x118000000
(bootloader) serialno: FA54SYJ03650
all:
Insaniity said:
I can do all command on bootloader so :
C:\minisdk>fastboot getvar all
(bootloader) version: 0.5
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:cache: 0x14000000
(bootloader) partition-type:userdata: ext4
(bootloader) partition-size:userdata: 0x5e0000000
(bootloader) partition-type:system: ext4
(bootloader) partition-size:system: 0x118000000
(bootloader) serialno: FA54SYJ03650
all:
Click to expand...
Click to collapse
that's what I meant with "usually" (usually I'd ask for a "fastboot getvar all" excluding IMEI and s/n, but since you can't get to download mode)
on the M9, the "fastboot getvar all" informational data, comes from download mode, not bootloader, so unfortunatly the above is quite useless,
let's go back to
* some screenshots
* copy/paste of fastboot commands (fastboot devices, fastboot oem rebootRUU, fastboot oem reboot-download)
EDIT: and what were you trying to flash (link to thread and file please)
nkk71 said:
that's what I meant with "usually" (usually I'd ask for a "fastboot getvar all" excluding IMEI and s/n, but since you can't get to download mode)
on the M9, the "fastboot getvar all" informational data, comes from download mode, not bootloader, so unfortunatly the above is quite useless,
let's go back to
* some screenshots
* copy/paste of fastboot commands (fastboot devices, fastboot oem rebootRUU, fastboot oem reboot-download)
Click to expand...
Click to collapse
Ok, I managed to get into download mode by writing this in bootloader mode ( I used the firmware 2.10.401.x )
fastboot flash aboot aboot_signed.img
fastboot flash adsp adsp.img
fastboot flash cota cota.img
fastboot flash cpe cpe.img
fastboot flash hosd hosd_signed.img
fastboot flash hyp hyp-8994-1.img
fastboot flash modem_st1 modem_st1.img
fastboot flash modem_st2 modem_st2.img
fastboot flash persist persist.img
fastboot flash pg2fs pg2fs_ship_signkey.img
fastboot flash pmic pmic-8994-1.img
fastboot flash radio radio.img
fastboot flash recovery recovery.img
fastboot flash rpm rpm-8994-1.img
fastboot flash sbl1 sbl1-8994-1.img
fastboot flash sdi sdi.img
fastboot flash sensor_hub sensor_hub.img
fastboot flash tz tz-8994-1.img
This is getvar
(bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) imei:
(bootloader) version-main: 1.32.401.17
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.04_U11440601_71.02.50709G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: HTC__031
all:
It is very strange, If i try to flash another firmware, for example 1.32.401.xx, after flashing I can't get to download mode again.
Insaniity said:
fastboot flash aboot aboot_signed.img
fastboot flash adsp adsp.img
fastboot flash cota cota.img
fastboot flash cpe cpe.img
fastboot flash hosd hosd_signed.img
fastboot flash hyp hyp-8994-1.img
fastboot flash modem_st1 modem_st1.img
fastboot flash modem_st2 modem_st2.img
fastboot flash persist persist.img
fastboot flash pg2fs pg2fs_ship_signkey.img
fastboot flash pmic pmic-8994-1.img
fastboot flash radio radio.img
fastboot flash recovery recovery.img
fastboot flash rpm rpm-8994-1.img
fastboot flash sbl1 sbl1-8994-1.img
fastboot flash sdi sdi.img
fastboot flash sensor_hub sensor_hub.img
fastboot flash tz tz-8994-1.img
This is getvar
(bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) imei:
(bootloader) version-main: 1.32.401.17
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.04_U11440601_71.02.50709G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: HTC__031
all:
It is very strange, If i try to flash another firmware, for example 1.32.401.xx, after flashing I can't get to download mode again.
Click to expand...
Click to collapse
Please dont do firmware/low-level stuff that way, unless you are sure what you're doing
baseband has been updated to 2.10.401.1 firmware, obviously version-main wont reflect that change since it's not a "proper" flash... and serisously don't mess with "fastboot flash aboot, hosd, sbl, etc" .... you're heading into trouble
stop rushing things, relax, and take it one step at a time (slowly)
nkk71 said:
Please dont do firmware/low-level stuff that way, unless you are sure what you're doing
baseband has been updated to 2.10.401.1 firmware, obviously version-main wont reflect that change since it's not a "proper" flash... and serisously don't mess with "fastboot flash aboot, hosd, sbl, etc" .... you're heading into trouble
stop rushing things, relax, and take it one step at a time (slowly)
Click to expand...
Click to collapse
Ok, now I'm here.
C:\minisdk>fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) imei:
(bootloader) version-main: 2.10.401.1
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.04_U11440601_71.02.50709G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: HTC__031
all:
I can access only to download mode and my firmware is ok.
It is matching with the download mode.
What should I do now?
Insaniity said:
Ok, now I'm here.
C:\minisdk>fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) imei:
(bootloader) version-main: 2.10.401.1
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.04_U11440601_71.02.50709G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: HTC__031
all:
I can access only to download mode and my firmware is ok.
It is matching with the download mode.
What should I do now?
Click to expand...
Click to collapse
I'd recommend taking a break; I have no idea how you got there, because you keep forgetting that we need to know what you are flashing and how
for example, this is me flashing my firmware:
http://forum.xda-developers.com/showpost.php?p=62552232&postcount=646
and how I choose to copy/paste my information
^^ you don't need to follow those steps, I'm just saying you're going from:
I'm at location D ... okay now I'm at location K ... you're probably doing just fine, but not saying what and how you are flashing, it's difficult to help
nkk71 said:
I'd recommend taking a break; I have no idea how you got there, because you keep forgetting that we need to know what you are flashing and how
for example, this is me flashing my firmware:
http://forum.xda-developers.com/showpost.php?p=62552232&postcount=646
and how I choose to copy/paste my information
^^ you don't need to follow those steps, I'm just saying you're going from:
I'm at location D ... okay now I'm at location K ... you're probably doing just fine, but not saying what and how you are flashing, it's difficult to help
Click to expand...
Click to collapse
I know how to flash a firmware....
Now I'm tryng to flash a RUU
Insaniity said:
I know how to flash a firmware....
Now I'm tryng to flash a RUU
Click to expand...
Click to collapse
fine, have it your way
flashing RUU is exactly the same procedure as flashing firmware
but you continuously refuse to say, what you are flashing or how, if you look at my first reply, I asked for more details, including what you are trying to flash ("link to thread and file please")
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I see some things change and some things never do
as a final hint (dont know if that's the case or not, since you wish not to share, the information), in a word: htc_fastboot.exe (try version 3.0.9.2)
do you try the ruu.exe or the zip? it will be MUCH better to use the zip. also mostly only the zip seems to work
DeeZZ_NuuZZ said:
...also mostly only the zip seems to work
Click to expand...
Click to collapse
elaborate, thank you
I have something similar, I flashed NoRedTxt_Aboot+2.11.531.19 once in my m9 tmo. Supposlly it flashed good. Now I can't get to download mode or ruu mode. In ruu mode after 1 sec it gets me back to download mode. Which is where it takes me everytime, besides that twrp is the other place I ca go too.
---------- Post added at 11:51 AM ---------- Previous post was at 11:44 AM ----------
Insaniity said:
Hi all, I have a big problem with my htc one m9. Today I was trying to get in recovery mode but the phone was rebooting itself, so I tryed to flash a ruu (via oem rebootRUU) but maybe something went wrong (hboot pre-update) and now the phone reboots when I try to enter in download mode via bootloader and also I canno't enter in "oem rebootRUU".
I have S-OFF.
Someone can help me? Thanks..
Click to expand...
Click to collapse
I'm stuck in same place as you. But different reason.I'm running stock 2.11.531.19 tmo m9. Just twrp s off and unlocked. What can I do to get to work again ruu or download again
Hello Guys,
I have a problem with my HTC M9 prime Camera Edition yesterday I paid 25 $ for S-Off with sunshine App everything was working great (great App thanks)
after that my phone was S-OFF i was excited and wanted to flash a other Stock Rom but something went wrong and my download mode is deleted now or not more availlable.
Information about my Phone: HTC_Himar 128 SHIP S-OFF
before CID was HTC__034 CID
before MID was 2PRG10000 MID
LK-1.01.0000
OS-2.18.401.10
Bootloader UNLOCKED
The device is rooted and recovery is twrp-3.0.2-0-himar
Android version: marshmallow 6.0
What i did is i wanted to flash the 3.35.401.12-Firmware to change my stock i did it with renaming the file in 0PJAIMG.zip and flashing with sd card in download mode
file could be not flashed some zip error displayed i rebooted the phone everything was ok no problems after that.
I also changed the MID before flashing to: OPJA10000 and CID to HTC__J15. After that i wanted to try it again with the firmware from xda forum 3.35.401.12-Firmware.zip
Phone was flashing the file after that i rebooted and i opened the developer options to check the firmware info but the firmware stayed the same 2.18.401.10
and after that i wanted to reboot to Download mode but it seems after the last flash the Download mode is deleted or missing.
I can boot into Bootloader mode recovery twrp is working very fine system is working very fine everything is working just the problem is that i want the download mode back
but i can´t flash my stock rom without download mode. I was sitting yesterday half night and reading and searching for solutions and help, but withoud success so im now here and hope that someone of u guys
can help me to solve my problem. The thing is that i wanted to change my stock because i am not able with the 2.18.401.10 to flash any custom rom for the M9 nothing is working for example the viper rom
or cyanogenmode also the recovery name is different for my HTC M9 prime CE name is himar and on the M9 original is hima nothing is working for this phone..... please help
hi, i have the same probleme, but I can't flash anything, since My M9 have s-on :S
soo, I cant install a ruu exe, because it says low battery (by go to log_ruu I see it cant do adbdevices)
I can't enter in download mode, it jumbps to bootloader
I can do only some commands on fastboot, for exemple Fastboot oem get_identifier_token don't work, only in download mode (I can't go to download mode, because it doesnt exists)
I can't do comands by adb
C:\adb>fastboot flash zip M9_2.10.401.1_NoWipe_TWRP_2871b1_rename_to_ROM.zip
target reported max download size of 536870912 bytes
sending 'zip' (64024 KB)...
OKAY [ 1.418s]
writing 'zip'...
FAILED (remote: cannot flash this partition in s-on state)
finished. total time: 1.436s
Click to expand...
Click to collapse
C:\adb>fastboot getvar all
(bootloader) version:0.5
(bootloader) variant:MTP eMMC
(bootloader) secure:yes
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0x14000000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0x5e0000000
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0x118000000
(bootloader) serialno:MB523YJ06983
all:
finished. total time: 0.138s
Click to expand...
Click to collapse
C:\adb>Fastboot oem get_identifier_token
...
FAILED (remote: unknown command)
finished. total time: 0.006s
Click to expand...
Click to collapse
Guys ,pls share hosd_signed himaul img for m9.I don't have download,recovery mode with s on too..pls help me
Way forward
EclipseX said:
hi, i have the same probleme, but I can't flash anything, since My M9 have s-on :S
soo, I cant install a ruu exe, because it says low battery (by go to log_ruu I see it cant do adbdevices)
I can't enter in download mode, it jumbps to bootloader
I can do only some commands on fastboot, for exemple Fastboot oem get_identifier_token don't work, only in download mode (I can't go to download mode, because it doesnt exists)
I can't do comands by adb
Click to expand...
Click to collapse
Hi, were you able to fix this eventually?
Yeah, did send it to HTC without invoice. HTC change the entire motherboard for free
lubaid said:
Hi, were you able to fix this eventually?
Click to expand...
Click to collapse

A5DWG - Phone Won't Boot

Hi there,
I have a HTC Desire 816 dual sim, i've been using CM v13 for more than 1 years, everything smooth after i changed my custom rom to MoKee (Nougat version). I got several isu when using MK, such as camera not working randomly, phone turned off when the percentages still > 20%, etc.
After that, I install another custom rom Lineage v14. I still get the same issues. And 3 days ago, I got my phone can't boot at all.
This is my phone detail :
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.31.50.0215
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HC46AMZ00381
(bootloader) imei: xxxxxxxxxxxxxxxxxxxx
(bootloader) imei2: xxxxxxxxxxxxxxxxxxxx
(bootloader) meid: A1000032DB03A8
(bootloader) product: a5_dwg
(bootloader) platform: hTCBmsm8226
(bootloader) modelid: 0P9C51000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 09813c97
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.016s
Click to expand...
Click to collapse
Bootloader is unlocked with S-ON.
The phone can't boot, randomly can't enter recovery and it's saying OS- (blank).
Anyone can help me?
I have successed flash the RUU firmware with HBoot method, but the phone still can't boot.
The OS- already filled with OS-1.56.707.1
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.31.50.0624_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.56.707.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HC46AMZ00381
(bootloader) imei: xxxxxxxxxxxxx
(bootloader) imei2: xxxxxxxxxxxxx
(bootloader) meid: A1000032DB03A8
(bootloader) product: a5_dwg
(bootloader) platform: hTCBmsm8226
(bootloader) modelid: 0P9C51000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 703d7086
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.031s
Click to expand...
Click to collapse
still anyone?
is the phone booting up??
sang6iru said:
I have successed flash the RUU firmware with HBoot method, but the phone still can't boot.
The OS- already filled with OS-1.56.707.1
still anyone?
Click to expand...
Click to collapse
still it boots into recovery?
first of all it has unlocked bootloader?
yes it is, but with usb plugged.
sang6iru said:
Hi there,
I have a HTC Desire 816 dual sim, i've been using CM v13 for more than 1 years, everything smooth after i changed my custom rom to MoKee (Nougat version). I got several isu when using MK, such as camera not working randomly, phone turned off when the percentages still > 20%, etc.
After that, I install another custom rom Lineage v14. I still get the same issues. And 3 days ago, I got my phone can't boot at all.
Bootloader is unlocked with S-ON.
The phone can't boot, randomly can't enter recovery and it's saying OS- (blank).
Anyone can help me?
Click to expand...
Click to collapse
If u can boot to fastboot I can help I guess
rjcool1999 said:
If u can boot to fastboot I can help I guess
Click to expand...
Click to collapse
tell me how? :victory:
sang6iru said:
tell me how? :victory:
Click to expand...
Click to collapse
Okk lets start.......
1st go to fastboot and connect phone with PC and use minimal fastboot and adb to flash recovery on your device. Command "fastboot flash recovery twrp.img"(recovery.img must be renamed as twrp)
2nd type fastboot reboot-bootloader
3rd type exit.
Now phone will boot to bootloader, from bootloader go to recovery and wipe everything including data system cache dalvik cache internal memory external sd card(if inserted). Now flash lineage OS 14.1, wipe cache dalvik cache, flash open gapps pico 7.1(arm) and wipe cache dalvik cache again now reboot
---------- Post added at 09:58 AM ---------- Previous post was at 09:55 AM ----------
Now if u are unable to boot into recovery then last option is to extract the system.img from system.new.dat and flashing the system.img by booting into fastboot and running these commands
"fastboot flash system system.img".
Now try and see if it works or not
rjcool1999 said:
If u can boot to fastboot I can help I guess
Click to expand...
Click to collapse
rjcool1999 said:
Okk lets start.......
1st go to fastboot and connect phone with PC and use minimal fastboot and adb to flash recovery on your device. Command "fastboot flash recovery twrp.img"(recovery.img must be renamed as twrp)
2nd type fastboot reboot-bootloader
3rd type exit.
Now phone will boot to bootloader, from bootloader go to recovery and wipe everything including data system cache dalvik cache internal memory external sd card(if inserted). Now flash lineage OS 14.1, wipe cache dalvik cache, flash open gapps pico 7.1(arm) and wipe cache dalvik cache again now reboot
---------- Post added at 09:58 AM ---------- Previous post was at 09:55 AM ----------
Now if u are unable to boot into recovery then last option is to extract the system.img from system.new.dat and flashing the system.img by booting into fastboot and running these commands
"fastboot flash system system.img".
Now try and see if it works or not
Click to expand...
Click to collapse
:cyclops: after the last step (3rd step), i go back to hboot then choose recovery, suddently my phone restarted and still can't enter recovery.
where do i find the system.new.dat ?? if u mean by extract it from Lineage ROM and rename the system.new.dat into system.img, i've done it.
and still, the phone won't boot into recovery or normal boot, phone still suddently turn off and on again.
sang6iru said:
where do i find the system.new.dat ?? if u mean by extract it from Lineage ROM and rename the system.new.dat into system.img, i've done it.
and still, the phone won't boot into recovery or normal boot, phone still suddently turn off and on again.
Click to expand...
Click to collapse
No no renaming it wont work. First u have to download Auto tool unpack repack from here https://forum.xda-developers.com/general/general/tool-auto-tool-unpack-repack-rom-t3278393.
Now extract the lineage os zip, u will get system.new.dat, file_contexts and system transfer list. Now open file_contexts with notepad++ and save it, choose the type as "All" and save the file, it should not be saved as a text file.
Now open the unpack-repack tool and copy system.new.dat, file_contexts(new one) and system transfer list to the input-dat folder. Now open the unpack tool and click on unpack, there u will get one file named as system.dat.img/system.img(.img is the format). Okk now the actual work begins follow my directions carefully.......
1st make sure u have htc usb drivers, universal adb drivers are installed on your PC.
2nd Download minimal fastboot and adb package from google.
3rd copy the system.dat.img/system.img file to minimal fastboot folder.
4th Boot your phone into fastboot mode and connect with your PC
5th Inside the minimal fastboot folder press shift and right click(mouse button), there u will see "open command prompt here" click on it.
6th Now in the command prompt type fastboot flash system system.img/system.dat.img
7th after the img file gets flashed type fastboot reboot, hope so your device will reboot
---------- Post added at 11:33 AM ---------- Previous post was at 11:30 AM ----------
If u face any problem ask me, will try to help you as soon as possible
---------- Post added at 11:33 AM ---------- Previous post was at 11:33 AM ----------
sang6iru said:
:cyclops: after the last step (3rd step), i go back to hboot then choose recovery, suddently my phone restarted and still can't enter recovery.
Click to expand...
Click to collapse
Maybe you should re-download twrp file from TWRP website
I couldn't find system.dat.img or system.img
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
when i search the unpack folder :
also, i've download lates twrp from twrp site, still can't boot into recovery. phone suddently turnoff .
Is :
(bootloader) battery-voltage: 0mV << means something for u?
sang6iru said:
I couldn't find system.dat.img or system.img

when i search the unpack folder :
when i search the unpack folder :

also, i've download lates twrp from twrp site, still can't boot into recovery. phone suddently turnoff .
Is :
(bootloader) battery-voltage: 0mV << means something for u?
Click to expand...
Click to collapse
No no the system.dat.img/system.img is not inside unpack-dat folder it is outside it
i didn't found in that too..
sang6iru said:
i didn't found in that too..
Click to expand...
Click to collapse
@bigsupersquid plz provide him with the system.img if possible
The hboot variables look like the battery is flat dead.
ROMs won't boot with no battery power, they reboot themselves without starting up.
Recovery might do the same, but it didn't used to.
You try a different usb cable to charge with? Usually mine go bad the other way, they still charge badly but lose data and won't talk to the phone, but could be bad cable.
I'm not sure if you can charge the phone in fastboot, might try leaving it plugged in a couple hours. Then do the getvar command with fastboot again and post that battery voltage it gives you.

bootloop ,don't know what is my CID no recovery no download mode only bootloader

my htc now is just bootloop when start ,,i can just Access to the bootloader and the big problem that i dont know the cid to flash the firmwer
plz any suggestion or any help
thanks in advance
Did you try to read the cid via fastboot (fastboot oem readcid)?
Samy6699 said:
my htc now is just bootloop when start ,,i can just Access to the bootloader and the big problem that i dont know the cid to flash the firmwer
plz any suggestion or any help
thanks in advance
Click to expand...
Click to collapse
Using ADB and Fastboot tools to get more information about your phone
Command /: Fastboot getvar all
Sirius77 said:
Did you try to read the cid via fastboot (fastboot oem readcid)?
Click to expand...
Click to collapse
yes i try it give just partition info
iamaniff said:
Using ADB and Fastboot tools to get more information about your phone
Command /: Fastboot getvar all
Click to expand...
Click to collapse
adb in bootloader just give some info about partition
it give some thing like that
(bootloader) version:0.5
(bootloader) ramdump-mode:false
(bootloader) variant:Surf eMMC
(bootloader) secure:yes
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0xe000000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0x61b000000
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0xef000000
(bootloader) serialno:xxxxxxxxxxxx
all:
finished. total time: 0.380s
Samy6699 said:
it give some thing like that
(bootloader) version:0.5
(bootloader) ramdump-mode:false
(bootloader) variant:Surf eMMC
(bootloader) secure:yes
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0xe000000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0x61b000000
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0xef000000
(bootloader) serialno:xxxxxxxxxxxx
all:
finished. total time: 0.380s
Click to expand...
Click to collapse
Are your HTC10 is unlocked version?
modelid: 2PS650000
cidnum: BS_US001
cidnum: BS_US002
Your mainversion? your 10 is a s-off or s-on?
nenebear said:
Are your HTC10 is unlocked version?
modelid: 2PS650000
cidnum: BS_US001
cidnum: BS_US002
Your mainversion? your 10 is a s-off or s-on?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Its 2PS6200 htc m10h
I dont know the cid
Its locked and s—on
Samy6699 said:
Its 2PS6200 htc m10h
I dont know the cid
Its locked and s—on
Click to expand...
Click to collapse
Thats a European device and if it's not coming from a specific carrier the software/firmware should be somewhere in like
2.41.401.3 or higher or a bit lower, depends on the updates you have done.
Mr Hofs said:
Thats a European device and if it's not coming from a specific carrier the software/firmware should be somewhere in like
2.41.401.3 or higher or a bit lower, depends on the updates you have done.
Click to expand...
Click to collapse
thank you but how to flash it when i can't Access to recovery and download mode ?????
Samy6699 said:
thank you but how to flash it when i can't Access to recovery and download mode ?????
Click to expand...
Click to collapse
You can try the latest RUU.exe file and execute it when the phone is in the bootloader. If you can't access any other part then there is no way to flash it differently.
Check the forum here for the latest RUU.exe
Mr Hofs said:
You can try the latest RUU.exe file and execute it when the phone is in the bootloader. If you can't access any other part then there is no way to flash it differently.
Check the forum here for the latest RUU.exe
Click to expand...
Click to collapse
thanx ,,,,,,,,,,,,i try some RUU but always it say battery low
i try to charge put the phone mor then 6 hour but still say battery low
Samy6699 said:
thanx ,,,,,,,,,,,,i try some RUU but always it say battery low
i try to charge put the phone mor then 6 hour but still say battery low
Click to expand...
Click to collapse
Let the battery run out and put it on the wallcharger. If you can't get it to charge in any way send it in for repair.
is there any why to know what is my CID in that case ???
Samy6699 said:
is there any why to know what is my CID in that case ???
Click to expand...
Click to collapse
If your htc10 is s-off(unlocked),then we can dump some partitions to know some devices info.
nenebear said:
If your htc10 is s-off(unlocked),then we can dump some partitions to know some devices info.
Click to expand...
Click to collapse
No its s-on and locked :crying:
Samy6699 said:
is there any why to know what is my CID in that case ???
Click to expand...
Click to collapse
Why are you so keen on your cid when you can't even boot it or get info from it.
---------- Post added at 07:18 PM ---------- Previous post was at 07:17 PM ----------
nenebear said:
If your htc10 is s-off(unlocked),then we can dump some partitions to know some devices info.
Click to expand...
Click to collapse
You don't need s-off.....just a simple "fastboot getvar all" will do to get all the needed info.
Samy6699 said:
my htc now is just bootloop when start ,,i can just Access to the bootloader and the big problem that i dont know the cid to flash the firmwer
Click to expand...
Click to collapse
Boot to download mode.
What OS version does it give? (e.g. 2.41.617.3)
What is the three-digit part (e.g. 617)? That's your device. Download the latest RUU with that device identifier.
cf. https://www.htc.com/us/support/rom-downloads.html
Rolo42 said:
Boot to download mode.
What OS version does it give? (e.g. 2.41.617.3)
What is the three-digit part (e.g. 617)? That's your device. Download the latest RUU with that device identifier.
cf. https://www.htc.com/us/support/rom-downloads.html
Click to expand...
Click to collapse
If you would have a read in this thread you would know that he can't boot to download mode, not to recovery and the handset is bootloopimg.....
If it could boot to download mode i would have solved this already.
Mr Hofs said:
If you would have a read in this thread you would know that he can't boot to download mode, not to recovery and the handset is bootloopimg.....
If it could boot to download mode i would have solved this already.
Click to expand...
Click to collapse
Since you insist on condescending publicly (do you have "If you would have read this thread" as a macro? Does your keyboard autosuggest the entire clause?) and you think you're the only person who could possibly help the OP, I did read this thread and either:
1) He can boot to download mode but fumbled it somehow; without any information describing what happens when he attempts to enter download mode, I'll infer that he hasn't tried properly
2) Whether he can or cannot enter download mode is moot since the RUU will deal with it and provides instructions when run
Running the correct RUU is the better option for someone terse on troubleshooting and/or if the phone is that borked. Besides, it's locked and S-ON; there aren't many options.
First law of troubleshooting: trust no-one.
Samy6699 said:
i can't Access to recovery and download mode ?????
Click to expand...
Click to collapse
What, exactly, are you doing to access download mode and what, exactly, is the result?
Here's a video to help: https://www.youtube.com/watch?v=sf-HZTf9tVs

HTC M9 Got encrypted... Please i need help

Hello,
I got on my phone a very ni message, Your HTC is encrypted... You have 30 attemps to unlock your phone with a code or device data will be removed.
There was a button "Factory Reset" i have try this button and after a Hour nothing happend. I hold the power button and i can restart or Shutdown my Phone...
I think this is a Malware. I have try to Flash a new RUU but nothing help.. i have try it with "Fastboot oem rebootRUU" but what i only got was a boot loop. I have a custom Recovery on my phone (Team Win Recovery Project)
i have try to Format Data and Factory reset but i only got: Unable to mount Data..and more
I have try it to reboot over TWRP an he says "No OS installed , want to reboot?"
Did anybody know what i can do now?
Here are some Device Data:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) imei: 357226066******
(bootloader) version-main: 3.35.161.12
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U11440792_96.00.51201G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: VODAP102
all:
finished. total time: 0.027s
Click to expand...
Click to collapse
Thanks for Help
Flash the stock firmware via SD card method. You will lose all data. You can flash 3.35.161.x firmwares.. Do not lock bootloader or s-on.
shivadow said:
Flash the stock firmware via SD card method. You will lose all data. You can flash 3.35.161.x firmwares.. Do not lock bootloader or s-on.
Click to expand...
Click to collapse
I have try it before, but i get a Blackscreen and a white HTC logo is flashing. But i will try it again. Thanks for Help

Categories

Resources