Here instructions how to upgrade Acer Liquid Jade Primo to new software.
this steps is only if your phone have build 10586.xxx
1. enable developers and device portal in phone settings (needed to install dependencies an Interop tools)
2. download and install Interop Tools (if interop tools not working, check notice at end of the post)
https://drive.google.com/open?id=0B4juayHJ-ERxOEh2NmR2dTlQZlU
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. download and install iutool http://forum.xda-developers.com/attachment.php?attachmentid=3860782&d=1472659473
4. download NDTK files http://forum.xda-developers.com/attachment.php?attachmentid=3860780&d=1472659433 and extract to empty folder (for example C:\NDTK\)
5. start Interop Tools, select This Device - Interop Unlock
6. enable "Enable installing NDTK on any device"
7. on PC windows start Command prompt as administrator
8. depend to your Windows version enter
32-bit:
CD C:\Program Files\Windows Kits\10\Tools\Bin\i386
Click to expand...
Click to collapse
64-bit:
CD C:\Program Files (x86)\Windows Kits\10\Tools\Bin\i386
Click to expand...
Click to collapse
9. enter
iutool -v -p C:\NDTK
Click to expand...
Click to collapse
or path to folder where you extract files
10. after phone restart, start Interop Tools - This Device - Interop Unlock
11. select "Restore original manufacturer"
12. now you can enable Interop unlock
13. restart phone and start Interop Tools.
14. select Registry Editor (or Registry browser)
15. change identification data in HKLM\System\Platform\DeviceTargetingInfo
- use "Read Data" to see current Registry Value Data
- use "Write Data" to save new Value entry
use info for Lumia 950 XL DS
PhoneHardwareVariant : RM-1116
PhoneManufacturer : MicrosoftMDG
PhoneManufacturerModelName : RM-1116_15169
PhoneModelName : Lumia 950 XL DUAL SIM
16. when you done, turn off phone, after start check for updates....
17. dont be worried if screen rotated upside-down during spinning gears. is fine, some bug in bootloader...
18. when upgrade done i suggest to make hard reset.
in case if Interop Tools not working, try use this old version
install dependencies and Interop Tools this version (this version worked fine and not crash on Jade Primo) https://forum.xda-developers.com/showpost.php?p=68982441&postcount=284
Click to expand...
Click to collapse
just upgraded Acer to CU without problem
in case no new update, change
PhoneMobileOperatorName to 000-HR or any other retail for your country (000-GB, 000-DE, 000-BA, 000-IT, for example)
Both have SD810, oops nm 808. Good deal! What is the operator normally set to 000-11 or 000-??
was 000-88 here on Jade, but not see CU in update catalog for 88, only for 000-xx (country) in moment
Dear OP . after Hard reset there's no need to Re-Deploy the NDTKSvc . Updates won't revert by hard reset . only if you flash your phone you need to do it again . So you have to keep going from step 14, I mean even no interop unlock needed
ngame said:
Dear OP . after Hard reset there's no need to Re-Deploy the NDTKSvc . Updates won't revert by hard reset . only if you flash your phone you need to do it again . So you have to keep going from step 14, I mean even no interop unlock needed
Click to expand...
Click to collapse
i tried many things and worked only with this steps (build 10586, before update).... thx for notice for after upgrade... forgot to change
Is Creators Update fully compatible with Acer Liquid Jade Primo? Are there known issues? On Anniversary Update build 14393.1066 it works very well
mikevespa said:
Is Creators Update fully compatible with Acer Liquid Jade Primo? Are there known issues? On Anniversary Update build 14393.1066 it works very well
Click to expand...
Click to collapse
It works well.
In another forum (drwindows.de) an user has reported a problem with the display that remains always on:
"creators update läuft ansich top,ohne probleme, das problem ist der bildschirm geht nicht aus.das display ist immer an und zieht den akku leer.Deswegen musste ich es leider deinstalieren.
falls jemand ne lösung für das problem hat,immer her damit soft und hard reset bringt schonmal nichts."
Google translate: " Creators update runs ansich top, without problems, the problem is the screen is not from the display is always on and pulls the battery empty. Therefore, I had to deinstalieren it unfortunately. If someone has ne solution for the problem, always here so soft and hard reset brings schonmal nothing."
Is it true?
mikevespa said:
In another forum (drwindows.de) an user has reported a problem with the display that remains always on:
Is it true?
Click to expand...
Click to collapse
Happens once with CU, hard reset solved. But my advice is to stay with AU. No problems noticed
I'm locked on the AU build 14393.1066. Did you receive the new build 14393.1198?
mikevespa said:
I'm locked on the AU build 14393.1066. Did you receive the new build 14393.1198?
Click to expand...
Click to collapse
did you make hard reset, check ID's again
is not my Acer phone, i must contact owner of phone to check current versions
I'm already on AU but I've the old 14393.1066 build installed months ago via Windows Insider. Now I've just re-entered again as insider, checked for updates, but nothing comes down... Should I wait 1 day before to get the new cumulative update (14393.1158)?
Is the 14393.1358 build available in Release Preview Channel without using Interop Unlock?
mikevespa said:
I'm already on AU but I've the old 14393.1066 build installed months ago via Windows Insider. Now I've just re-entered again as insider, checked for updates, but nothing comes down... Should I wait 1 day before to get the new cumulative update (14393.1158)?
Is the 14393.1358 build available in Release Preview Channel without using Interop Unlock?
Click to expand...
Click to collapse
dont use Insider because CU...
try change
PhoneMobileOperatorName to:
000-33
000-33 or 000-88?
Do I need to use Interop Unlock?
Do you know what the string "Windows Mobile 10 Production:NPMN:::::ACERINC:S58" means?
http://www.catalog.update.microsoft...updateid=c36b8227-6387-4a66-b647-a5afdd0f4cbe
On the slow ring my Acer Liquid Jade Primo sees Creators Update (build 15063.2) without using any hacks. Is it safe to install it?
I tried CU (the same build 15063.2) months ago but the phone didn't restart anymore
mikevespa said:
On the slow ring my Acer Liquid Jade Primo sees Creators Update (build 15063.2) without using any hacks. Is it safe to install it?
I tried CU (the same build 15063.2) months ago but the phone didn't restart anymore
Click to expand...
Click to collapse
stay with AU, is work better
I did all the operations correctly as proposed at the first message of this topic. The phone downloaded the 15063.297 version but now it does not boot. It's the same as updating via slow ring. Any help here?
Thanks!
I noticed that after the update to AU, the phone boots with the screen completely black, you don't see the boot sequence, but it's working, so you have to wait a bit and then press the power button 2 times in order to turn the screen on. This happens only once, after the OS update.
Does CU do the same strange thing or doesn't boot at all? When I tried CU months ago, and verified that it didn't boot, I didn't try to press the power button 2 times
Related
News about iPAQ ROM development you can find on Spiaatie's Blog
ROMs for iPAQ devices are available on Spiaatie's ROMs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Description:
- Carefully read all first 3 posts!
- ROM Update Works with Windows - 2000 / XP / Vista / 7
- How to update ROM? Just read README file inside update folder!
- After update make a hard reset!
- Please don't mirror my files anywere else!
- hx2110(5) and hx2410(5) users MUST update ROM in following sequence:
* 1.00.00L -> 1.00.00H -> 1.02.00H -> WM 6.x
THIS ROM WORKS ONLY WITH:
hx2100 series: hx2110 - hx2115 - hx2190 - hx2190b - hx2195 - hx2195b
hx2400 series: hx2410 - hx2415 - hx2490 - hx2490b - hx2495 - hx2495b
hx2700 series: hx2750 - hx2755 - hx2790 - hx2790b - hx2795 - hx2790b
NEVER TRY TO UPDATE hx2490c OR hx2790c - You will brick it!
Click to expand...
Click to collapse
Always use iPAQ in Pre-BL mode to do the update!
Contacts + iTask + Reset (with stylus)
Release when Pre-BL appers on screen or if You see just white screen
Push Calendar button to get connection with PC
Always HARD-RESET iPAQ after update!
Calendar + Messaging + Power + Reset (with stylus)
Release when Formatting PS.. appers on screen
How to know model number?
It's under battery.
My old ROMs and shipped ROMs
- You will need these files if you still have WM2003 or WM5 on hx2110(5) / hx2410(5) before You can install WM6.5 Update
Absolutely amazing! Thank you very much for this!!
One question though, is there any possibility of a battery driver coming out?
nate1936 said:
Absolutely amazing! Thank you very much for this!!
One question though, is there any possibility of a battery driver coming out?
Click to expand...
Click to collapse
This version does have a battery driver
I coudn't get them with kitchen - so the kitchen is in trash for a time now
Oh, on second notice, everything seems to work great. You my friend are amazing
EDIT: SMALL TIP FOR EVERYONE
when installing it, make sure you point your hpRUU.ini file to the right file, so that you use the correct rom!
"ERROR 506" hpRUU.ini not found
Greetings and congratulations Spiaatie!
I am very excited about your 6.5 rom. However, as I try to flash I get a "ERROR 506" hpRUU.ini not found. Please advise.
ctlee2211 said:
Greetings and congratulations Spiaatie!
I am very excited about your 6.5 rom. However, as I try to flash I get a "ERROR 506" hpRUU.ini not found. Please advise.
Click to expand...
Click to collapse
Read my previous post, you need to rename the spiaatie_WM_6_5.nbf file to ipaqrom.nbf then get your previous hpRUU.ini from the 6.1 installation along with the .dll driver files
Fffuuuuuuu
Ok, So I looked at the notification que in the Memmaid program, and it said the windows mobile beta is expiring in [30] then [15] and now [7]
Is there a windows mobile 6.5 beta crack so it won't expire?? I love this OS Please help
Stupid question - My Hx2495 is still on WinM5, but I don't need to run the extra HX2110 / HX2410 at all, and just the 6.5 update, correct?
ctlee2211 said:
Greetings and congratulations Spiaatie!
I am very excited about your 6.5 rom. However, as I try to flash I get a "ERROR 506" hpRUU.ini not found. Please advise.
Click to expand...
Click to collapse
I have uploaded new fies.. my mistake - forgot to add them
nate1936 said:
Ok, So I looked at the notification que in the Memmaid program, and it said the windows mobile beta is expiring in [30] then [15] and now [7]
Is there a windows mobile 6.5 beta crack so it won't expire?? I love this OS Please help
Click to expand...
Click to collapse
huh.. how did You get something like that
OS does not expire, there is something wrong with that Memmaid software..
Divine_Madcat said:
Stupid question - My Hx2495 is still on WinM5, but I don't need to run the extra HX2110 / HX2410 at all, and just the 6.5 update, correct?
Click to expand...
Click to collapse
Yes, just run WM6.5 update and that's all
Thanks
Really GREAT work, Thanks!
Everything OK here, it is preferable to do a hard reset after the update.
Then you also have the nice new background etc.
I do have some problems with Outlook though.
For some reason i cannot setup a new account. Bug maybe?
When i choose <Menu> <Tools> <New account> nothing happens.
In <Options> when I tap on New Account... also nothing.
Can anyone confirm this?
Greetings to all.
Dropje said:
Really GREAT work, Thanks!
Everything OK here, it is preferable to do a hard reset after the update.
Then you also have the nice new background etc.
I do have some problems with Outlook though.
For some reason i cannot setup a new account. Bug maybe?
When i choose <Menu> <Tools> <New account> nothing happens.
In <Options> when I tap on New Account... also nothing.
Can anyone confirm this?
Greetings to all.
Click to expand...
Click to collapse
Hard reset is a must
Do I understand right - you try to make an email account?
Yes, i try to setup a new Email account.
Should be an easy task normally.
However I cannot make a new account.
Dropje said:
Yes, i try to setup a new account.
Should be an easy task normally.
However I cannot make a new account.
Click to expand...
Click to collapse
Did You try to make a new one from today screen?
Click on Email and there's a ''Set Up E-mail''
Works for me - succesfully made a gmail account.
Exactly, on the Today screen I clicked on E-mail (Set Up E-mail).
Next thing I see is the messaging screen where I clicked on <Menu> <Tools> <New Account...>. The screen that is coming back is the same as the opening screen.
When I click in the Today screen on Messaging (bottom right) then I get a different screen with <Setup E-mail>. But when I tap I also go back to the wrong screen ("To create a new message, tap Menu, then tap New.").
Normally I should get a screen where I can setup my IMAP Gmail settings. It does m not however. Maybe I should flash again. I came from 6.1 (the newer build).
Dropje said:
Exactly, on the Today screen I clicked on E-mail (Set Up E-mail).
Next thing I see is the messaging screen where I clicked on <Menu> <Tools> <New Account...>. The screen that is coming back is the same as the opening screen.
How did you setup the GMail account, Spiaatie? Thank you in advance!
Click to expand...
Click to collapse
Maybe do a Hard reset once more!
If I click on ''Set Up E-mail'' - I instantly get this screen - check picture
Ah, that screen is what I also expected to see!! Thanks for the picture.
But it clearly does NOT show-up in my case.
Soft reset did not help either
Strange, everything else is working flawlessly.
Will try flasing it again, could be a break in my flashing somehow.
Thank you Spiaati for the quick response!
UPDATE!
since ms is releasing full rollups of windows 10 mobile in windows update catalog, i'll start to collect and post full rollup links.
TH2:
10586.873 (10.04.2017) (offline: 3944 downloads)
10586.916 (05.05.2017) (offline: 978 downloads)
10586.962 (12.06.2017)
10586.1007 (11.07.2017)
10586.1045 (07.08.2017)
10586.1106 (11.09.2017)
10586.1176 (09.10.2017)
RS1:
14393.1066 (11.04.2017)
14393.1198 (05.05.2017)
14393.1358 (12.06.2017)
14393.1480 (11.07.2017)
14393.1593 (07.08.2017)
14393.1715 (11.09.2017)
14393.1770 (09.10.2017)
14393.1884 (15.11.2017)
14393.1944 (11.12.2017)
14393.2007 (06.01.2018)
14393.2068 (14.02.2018)
14393.2126 (20.03.2018)
RS2:
15063.251 (24.04.2017)
15063.297 (09.05.2017)
Total Download Count: 23258+
the screenshot shows the structure after using my personal build sorting script (powershell):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
old post:
Code:
hi everyone.
please participate in collecting cab update links for more devices/builds and i will add your pastebin links here.
i am starting it and hope you'll help me. collect links with [URL="http://www.telerik.com/download/fiddler"]fiddler[/URL] (only works from wp8 to w10m).
you need to be running the exact build for the update on your phone.
download/open windows insider app and apply to fast ring.
check for updates to download the insider fast configuration update. when it is preparing for update, disable wifi.
after the installation of the preparation update (gears), you're ready to push the cabs.
they can be pushed to the phone with iutool.exe via admin cmd
command: "C:\Program Files (x86)\Windows Phone Kits\8.1\Tools\bin\i386>iutool.exe -v -p c:\cabs"
[URL="http://forum.xda-developers.com/windows-phone-8/development/tools-wdk-wpak-wpdk-cabs-building-wp8-t3183972"]WDK,WPAK,WPDK (containing iutool.exe)[/URL]
put cabs you want to push to c:\cabs folder (create it). only update step by step, build by build.
phone might spit out a error but you can see in settings->update that it is preparing to update and rebooting automatically afterwards.
if you face iutool connection problems, disconnect the device in devices&printers and unplug/plug in usb cable again.
if you want to participate, only enable [URL="http://www.telerik.com/download/fiddler"]fiddler[/URL] right before you hit the "download update button" (check with edge browser if it works first).
that means, when it is checking for updates, it shouldn't use proxy yet.
otherwise windows update can't find any updates and you won't be able to capture them duh..
for general connection problems, install [URL="http://go.microsoft.com/fwlink/?LinkID=525569"]windows device recovery tool[/URL] (contains wp8 device drivers).
to collect cabs easily, save pastebin content to a txt file and open the list with [URL="http://www.freedownloadmanager.org/download.htm"]free download manager[/URL] for example.
[B]warning: the cab update collections are chipset (SOC)/display resolution/language/softkeys dependent.
you might be able to collect all your needed soc/res/lang/softkeys cabs for a unlisted device if you select carefully.
the language files are resolution independent so you can take the ones your device needs from other devices too.
to find out which langs your device needs, capture the update progress once with [URL="http://www.telerik.com/download/fiddler"]fiddler[/URL] and write it down.
a alternative that does not involve downgrading again to wp81 would be to mount your device's ffu rom file to check langs/soc/res (sk should be obvious).
preparation updates can contain device specific packages so only apply them to the correct device.
it is possible that on branded devices, this procedure fails.[/B]
[B]qc8974[/B]
[B]1080x1920[/B]
[B]softkeys[/B]
[B]HTC One M8 for Windows (0P6B140_TMOUS)[/B]
14203-14219 -> [URL="http://pastebin.com/pxxGeBEY"]LINK[/URL] (preparation update)
14219-10536 -> [URL="http://pastebin.com/hY3CiQ2W"]LINK[/URL]
14219-10549 -> [URL="http://pastebin.com/srawxsbT"]LINK[/URL]
14219-10572 -> [URL="http://pastebin.com/SWR2VKwT"]LINK[/URL]
14219-10581 -> [URL="http://pastebin.com/LqGbSZdv"]LINK[/URL]
14219-10586.11 -> [URL="http://pastebin.com/2QRtURXL"]LINK[/URL]
[B]hardkeys[/B]
[B]Nokia Lumia 930 (RM1045_059W1K8_000-CH_MV)[/B]
14226-10166 -> [URL="http://pastebin.com/QjfH6fa6"]LINK[/URL]
14226-10536 -> [URL="http://pastebin.com/2zf0u4iw"]LINK[/URL]
14226-10549 -> [URL="http://pastebin.com/d83zSGH0"]LINK[/URL]
14226-10572 -> [URL="http://pastebin.com/0bAQnLtd"]LINK[/URL]
14226-10581 -> [URL="http://pastebin.com/5TBxd2DX"]LINK[/URL]
14226-10586.11 -> [URL="http://pastebin.com/dbLJ9qyM"]LINK[/URL]
[B]Nokia Lumia 1520 (RM-940_059T5X9_AT&T) (you can disregard any "attwifi" cabs if you're not on AT&T)[/B]
14219-10549 -> [URL="http://pastebin.com/DWnKF1aX"]LINK[/URL]
10572-10581 -> [URL="http://pastebin.com/CyzWHDsQ"]LINK[/URL]
[B]qc8960[/B]
[B]768x1280[/B]
[B]hardkeys[/B]
[B]Nokia Lumia 1020 (RM875_059T7V7_eu_euro2_332)[/B]
12393-14226 -> [URL="http://pastebin.com/RF79E2B8"]LINK[/URL] (preparation update)
14226-10166 -> [URL="http://pastebin.com/KwCJQ7R0"]LINK[/URL]
14226-10536 -> [URL="http://pastebin.com/p7bp4qha"]LINK[/URL]
14226-10549 -> [URL="http://pastebin.com/7BfPQfna"]LINK[/URL]
14226-10572 -> [URL="http://pastebin.com/aNPTwEJm"]LINK[/URL]
14226-10581 -> [URL="http://pastebin.com/P2tfRamJ"]LINK[/URL]
14226-10586.11 -> [URL="http://pastebin.com/YC6uLCrR"]LINK[/URL]
[B]qc8x26[/B]
[B]480x800[/B]
[B]softkeys[/B]
[B]Nokia Lumia 635 [512MB ram] (RM-974_059W747_000-CH)[/B]
14219-10536 -> [URL="http://pastebin.com/84uu2gTy"]LINK[/URL]
14219-10572 -> [URL="http://pastebin.com/YSFspNKh"]LINK[/URL]
14219-10581 -> [URL="http://pastebin.com/YjH6X1KR"]LINK[/URL]
14219-10586.11 -> [URL="http://pastebin.com/nN2TT2YR"]LINK[/URL]
[B]720x1280[/B]
[B]hardkeys[/B]
[B]Nokia Lumia 830 (RM-984_059X0J5_000-CH)[/B]
15148-10581 -> [URL="http://pastebin.com/6RdbXHE9"]LINK[/URL]
15148-10586.11 -> [URL="http://pastebin.com/hQzY4S7g"]LINK[/URL]
reserved post 2
Looks like the lumia 1520 and the M8 are the same all around... what are the odds I can use these cabs to get from 10166 to 10572?
i tried to update from 10536 to 10572 and it didn't work even if they are full canonical cabs (spkg).
from wp81 to w10m it should work. but if you have a branded device, it might fail.
HD2Owner said:
i tried to update from 10536 to 10572 and it didn't work even if they are full canonical cabs (spkg).
from wp81 to w10m it should work. but if you have a branded device, it might fail.
Click to expand...
Click to collapse
Eh, I can do that just by choosing fast ring. Trying to get to 10572 while preserving Astoria. Ah well, guess I have to wait to the next fast ring push, which should solve the upgrade bug.
Hi,
First thanks for making this thread and really need to track update logs.
But why you/other people's still are linking/downloading wp8.1 OEM kit ? Since Windows 10 Mobile OEM kit is public kit.
And 8.1 KIT is huge size of 4-5 GB.
Just grab the WDK 10, it's only 600 MB. (Included all most of the files even oem certs, Updated tools, like FFUTool for profile mode etc.)
I hope that help to you/all other peoples always.
Btw I've most interesting things/research base on these tools, bringing very soon.
EDIT: Links added
Windows Driver Kit for Windows 10:
Download
OR official Page for Download All other tools.
https://msdn.microsoft.com/en-us/windows/hardware/dn913721.aspx
djamol said:
Hi,
First thanks for making this thread and really need to track update logs.
But why you/other people's still are linking/downloading wp8.1 OEM kit ? Since Windows 10 Mobile OEM kit is public kit.
And 8.1 KIT is huge size of 4-5 GB.
Just grab the WDK 10, it's only 600 MB. (Included all most of the files even oem certs, Updated tools, like FFUTool for profile mode etc.)
I hope that help to you/all other peoples always.
Btw I've most interesting things/research base on these tools, bringing very soon.
Click to expand...
Click to collapse
Link?
Thanks! Maybe now I can complete the update of my 640 to build 10536. It looked like that was pulled from the Fast Ring after the release of 10549 and 10572, so any devices still on Slow Ring build 10166 were stuck in an endless update loop when going to the Fast Ring.
How can install this cab files? i have lumia 635 512mb ram please somebody help me
snickler said:
Link?
Click to expand...
Click to collapse
Updated previous post and added links.
djamol said:
Updated previous post and added links.
Click to expand...
Click to collapse
Yeah, I didn't realize.. I installed the AIK a while back, so I had the tools installed .
10581 links added
let me know if a build rollup with all cabs combined and sorted with descriptions would be appreciated.
i did that already for build 10581 now.
I'm getting error 0x80188302, google says it's E_PACKAGE_ALREADY_INSTALLED. Is there any way to track or ignore package collisons?
t4m4m0 said:
I'm getting error 0x80188302, google says it's E_PACKAGE_ALREADY_INSTALLED. Is there any way to track or ignore package collisons?
Click to expand...
Click to collapse
leave out the studyid package(s). those are the needed windows insider configuration updates.
you might have this/those installed already .
Saw this article after I did the update to 10581. Need file list for Lumia 920 (RM-820_nam_att_100) to restore astoria.
So how do I install a group of these cabs to get to 10536 from 8.1?
edit: Can I just use iutool from win 8.1? I haven't been in the win8m scene, just fooled around with win10m.
loudog3114 said:
So how do I install a group of these cabs to get to 10536 from 8.1?
Click to expand...
Click to collapse
yes. enable wifi and open windows insider app. when you see the ring selection (fast/slow),
disable wifi via notification center. then apply to fast ring. device will reboot.
then you should be ready to push cabs. after cab transfer, iutool says "update started".
then it will spit out a error but if you go to settings-> update, you can see that it is preparing for update.
the phone will automatically reboot after update preparation and apply the cabs (shows gears).
followed by migrating data as usual.
HD2Owner said:
yes. enable wifi and open windows insider app. when you see the ring selection (fast/slow),
disable wifi via notification center. then apply to fast ring. device will reboot.
then you should be ready to push cabs. after cab transfer, iutool says "update started".
then it will spit out a error but if you go to settings-> update, you can see that it is preparing for update.
the phone will automatically reboot after update preparation and apply the cabs (shows gears).
followed by migrating data as usual.
Click to expand...
Click to collapse
Awesome. I had resigned myself to having to use 10166 if I wanted astoria but I am going to give this a go now.
Hello,
this is a guide to unlock bootloader!
Prerequisites:
WPInternals: http://www.wpinternals.net/index.php/downloads (Download the latest one, 1.2)
WDRT: http://go.microsoft.com/fwlink/?LinkID=525569 (Needed for drivers)
HEX loaders: Link
FFU Image of your phone (You can download it from WDRT or from the site www.lumiafirmware.com)
SBL3 Engineering: Link
(SBL3 is supported only on: L520-620-625-810-820-822-920-925-1020)
Optional:
OSFMount: http://www.osforensics.com/tools/mount-disk-images.html
Procedure:
1) Download and install Windows Device Recovery Tool (WDRT)
2) Download Windows Phone Internals (WPInternals) and extract that in a folder (for example C:\WPInternals)
3) Create a folder named "Loader" into C:\WPInternals
4) Download HEX loaders and extract it in the folder previously created.
5) Download SBL3 engineering archive (Only if you device is in supported list)
6) Create a folder named "SBL3" into C:\WPInternals and extract the SBL3 Engineering archive.
7) Download FFU image of your phone from WDRT or from lumiafirmware.com
You should get this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Optional:
Now, connect your Windows device and start WPInternals:
Go to "Unlock bootloader" (on the left) and press ok, your phone will be rebooted into flash mode:
After entering flash mode you should do:
The first one you need to select an FFU image
(If you downloaded it from WDRT, go to C:\ProgramData\Microsoft\Packages\Products\RM-xxx\ and select the ffu image file. WARNING: ProgramData is an hidden folder!)
The second one, select the folder "C:\WPInternals\Loader"
The third one, if you device is supported, select your SBL3 Engineering image (In my case, Lumia 920) from the folder "C:\WPInternals\SBL3".
BEWARE that you can brick you phone if you flash the wrong image.
You should get this:
Now press continue and wait.
DONE! You have successfully unlocked your phone!
If you flashed the SBL3 image, you can access to Mass Storage Mode.
Reserved for BCD editing guide
Reserved.
Is there a way to do this on other version of WM 10 than the ones supported by WP Internals?
dape16 said:
Is there a way to do this on other version of WM 10 than the ones supported by WP Internals?
Click to expand...
Click to collapse
Should work on all versions of W10M
is it necessary for what?
Satirus said:
is it necessary for what?
Click to expand...
Click to collapse
Editing BCD, creating custom roms, and so on (and someone expert can create custom rom based on android for example!)
ADeltaX said:
Editing BCD, creating custom roms, and so on (and someone expert can create custom rom based on android for example!)
Click to expand...
Click to collapse
Thanks for your kind reply. That's massive!
Should we at least hope for this to happen with x4x models?
Lanex777 said:
Should we at least hope for this to happen with x4x models?
Click to expand...
Click to collapse
yes
I have a question about the tutorial unlock bootloader in lumia 520
have lumia 520 build 10586.242 windows 10 mobile and my question is work tutorial in the version build ?
and can use files xap ?
chinitopex said:
I have a question about the tutorial unlock bootloader in lumia 520
have lumia 520 build 10586.242 windows 10 mobile and my question is work tutorial in the version build ?
Click to expand...
Click to collapse
Yes, it should work with that version.
chinitopex said:
and can use files xap ?
Click to expand...
Click to collapse
You mean interp unlock?
ADeltaX said:
chinitopex said:
I have a question about the tutorial unlock bootloader in lumia 520
have lumia 520 build 10586.242 windows 10 mobile and my question is work tutorial in the version build ?
Click to expand...
Click to collapse
Yes, it should work with that version.
Click to expand...
Click to collapse
Beware! I just tried unlocking the bootloader of 10586.242 on a Lumia 925 (RM-892) and got stuck at "Sending Loader". Next I'll go the recommended way:
Flash a Windows Phone 8.1 FFU
Run Windows Update until you have at least version 8.10.14219.341 of the OS
Unlock the bootloader using an Engineering SBL3 (only possible on compatible phones)
Run the Windows Insider tool and update to Windows 10 Mobile, possibly needs to run Windows Update a couple of times for the latest build
Enable Root Access directly on the phone
Bonus: Create a Cusom ROM
// update:
After several failed attempts (*aaaahahhhrhhrrgggg!!!!111111eleven*) I finaly got it:
Drivers from the Nokia Care Suite and the correct(tm) loader ftw.
.
ADeltaX
i dont have interp unlock in my lumia 520
so I cant use files xap in the moment and Swordfishx86 Remember my phone is lumia 520
so, thank you guys
chinitopex said:
[...] Swordfishx86 Remember my phone is lumia 520
Click to expand...
Click to collapse
My previous post was merely a report from my experience with wpInternals and not directed at you especially.
Swordfishx86 said:
Beware! I just tried unlocking the bootloader of 10586.242 on a Lumia 925 (RM-892) and got stuck at "Sending Loader". Next I'll go the recommended way:
Flash a Windows Phone 8.1 FFU
Run Windows Update until you have at least version 8.10.14219.341 of the OS
Unlock the bootloader using an Engineering SBL3 (only possible on compatible phones)
Run the Windows Insider tool and update to Windows 10 Mobile, possibly needs to run Windows Update a couple of times for the latest build
Enable Root Access directly on the phone
Bonus: Create a Cusom ROM
// update:
After several failed attempts (*aaaahahhhrhhrrgggg!!!!111111eleven*) I finaly got it:
Drivers from the Nokia Care Suite and the correct(tm) loader ftw.
.
Click to expand...
Click to collapse
I forgot to add more info about the possibility of getting stuck on "Sending Loader", thank you
chinitopex said:
ADeltaX
i dont have interp unlock in my lumia 520
so I cant use files xap in the moment and Swordfishx86 Remember my phone is lumia 520
so, thank you guys
Click to expand...
Click to collapse
Enabling Root Access should give you interop unlock!
ADeltaX said:
Enabling Root Access should give you interop unlock!
Click to expand...
Click to collapse
Thanks Adeltax
About Enabling Root Access interop unlock
you can tell me how i can make this in my lumia 520 ?/ please
chinitopex said:
Thanks Adeltax
About Enabling Root Access interop unlock
you can tell me how i can make this in my lumia 520 ?/ please
Click to expand...
Click to collapse
Go on "Enable Root Access", an click on Unlock Phone. It should work.
PS: You need an engineering SBL3.
ADeltaX said:
Go on "Enable Root Access", an click on Unlock Phone. It should work.
PS: You need an engineering SBL3.
Click to expand...
Click to collapse
I can use the SBL3 Engineering that are above?
and thank you so much
Maybe it is already known to some of you but I would like to share that it still possible to upgrade from Windows Phone 8.1 to Redstone if you have a Lumia 920, and to remain the unlocked bootloader with Mass Storage if you use WPInternals. I am assuming this method works for more Lumia x20 devices
My device: Lumia 920
Product code: 059R018
Manumodelname: RM-821-eu-netherlands-315
Steps I took:
-Rolled back device to Windows Phone 8.1 using Windows Device Recovery Tool.
Windows Device Recovery Tool flashed this rom onto my device:
RM821_3051.50009.1424.0005_RETAIL_eu_netherlands_315_05_442325_prd_signed.ffu
-Updated to the latest official Windows Phone 8.1 update for Lumia 920.
-Used WPInternals 1.2 to unlock bootloader and flash SBL3 to enable MassStorage. Partition table of RM821_3051.50009.1424.0005_RETAIL_eu_netherlands_315_05_442325_prd_signed.ffu was used.
-Rooted the device using WPInternals 1.2
-Deployed vcReg_1.5 and used Live Interop Unlock template.
-Deployed customPFD (@Pasquiindustry)
-Modified registry as described here.
-Installed Windows Insider and enrolled for Fast Ring.
-Upgraded to W10 Redstone 10.0.14393.5
-Hardreset after upgrade
The Unlocked Bootloader and MassStorage mode are still working without any problems. I therefore made a full ROM dump (EFIESIP, MainOS, Data) using WPInternals 1.2.
I would upload the ROM but since it is 29GB this would take ages.
(If you have suggestions for where to upload or how to make files smaller, please PM me)
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sure the bootloader stays unlocked, os updates cant lock it again. it stays unlocked till you reflash your phone with the recovery tool (or till the device recieves and ota firmwareupdate, which wont happen for old devices at all)
and i can confirm it works. just compress the archive, will end up in 15gb instead of 30gb. did that last week for my 920 too. the dude here from windowsmania.pl already announced custom roms (which are creatable with wpinternals too and are way smaller, cause in your archive you have the data partition too etc; which you shouldnt upload cause it contains access to the ms account etc you used to configure your device). i only replied cause i wanted to warn you to upload that
Hi Guys
Can someone upload a W10 ROM for the Lumia 920, with unlocked loader and root access. I can only find one on megaNZ , it flashes on the phone without any errors using windows phone internals, but goes into a boot loop with the Nokia logo..
HATA28 said:
Maybe it is already known to some of you but I would like to share that it still possible to upgrade from Windows Phone 8.1 to Redstone if you have a Lumia 920, and to remain the unlocked bootloader with Mass Storage if you use WPInternals. I am assuming this method works for more Lumia x20 devices
My device: Lumia 920
Product code: 059R018
Manumodelname: RM-821-eu-netherlands-315
Steps I took:
-Rolled back device to Windows Phone 8.1 using Windows Device Recovery Tool.
Windows Device Recovery Tool flashed this rom onto my device:
RM821_3051.50009.1424.0005_RETAIL_eu_netherlands_315_05_442325_prd_signed.ffu
-Updated to the latest official Windows Phone 8.1 update for Lumia 920.
-Used WPInternals 1.2 to unlock bootloader and flash SBL3 to enable MassStorage. Partition table of RM821_3051.50009.1424.0005_RETAIL_eu_netherlands_315_05_442325_prd_signed.ffu was used.
-Rooted the device using WPInternals 1.2
-Deployed vcReg_1.5 and used Live Interop Unlock template.
-Deployed customPFD (@Pasquiindustry)
-Modified registry as described here.
-Installed Windows Insider and enrolled for Fast Ring.
-Upgraded to W10 Redstone 10.0.14393.5
-Hardreset after upgrade
The Unlocked Bootloader and MassStorage mode are still working without any problems. I therefore made a full ROM dump (EFIESIP, MainOS, Data) using WPInternals 1.2.
I would upload the ROM but since it is 29GB this would take ages.
(If you have suggestions for where to upload or how to make files smaller, please PM me)
Screenshot
Click to expand...
Click to collapse
I've tried to do it, I unlocked the bootloader and rooted the phone with WP Internals, but I can't deploy xaps with the Windows Phone SDK. I even tried to move it to the phone and install it from file explorer, but it doesn't work. How can I deploy the xaps?
...and this guide still work after closing update for the unsupported device (920, my 925..) ? can you explain this in easymode?
thanks
Easy steps
blackpanther0 said:
...and this guide still work after closing update for the unsupported device (920, my 925..) ? can you explain this in easymode?
thanks
Click to expand...
Click to collapse
You can find it in easy steps here
gakshat14 said:
You can find it in easy steps here
Click to expand...
Click to collapse
Thank you very much!
Is glance screen working? I installed 10.0.14393.5 but can't find the settings anymore.
And would it be wise to change the registry settings back to original after getting the update?
phoenix0_4 said:
Is glance screen working? I installed 10.0.14393.5 but can't find the settings anymore.
And would it be wise to change the registry settings back to original after getting the update?
Click to expand...
Click to collapse
I think if you hard reset the phone, they go back to original. At least mine says it's Lucia 920 and I changed the keys to be lumina 535 to get the update
Ah, okay. Good to know, since I did a hard reset.
Will my Lumia 920 get further updates after changing back to the original settings?
phoenix0_4 said:
Ah, okay. Good to know, since I did a hard reset.
Will my Lumia 920 get further updates after changing back to the original settings?
Click to expand...
Click to collapse
I don't think so, but I'm not using it right now. Probably we'll need to change the values again
Yes, we do. After changing it back to Lumia-830-settings, there is another update.
you need to change the values everytime to get a new os-update, download of speechfiles and keyboardlayout works fine without (but you have to reopt to insiderring if you did a hardreset). i recommend changing the values to the original ones after every update, otherwise the store does crazy thing (atleast did for me)
Okay, did it. Thanks.
Is there a way to get the glance-function back to life? (The option for it in "personalisation" is missing and that one in "extras" is not working anymore.)
You can upload only EFIESP and MainOS without Data, because the last one is useless.
You can flash EFIESP and MainOS even if you are in WP8.1, but keep in mind that you need to do an hard reset via volume keys.
read pages ~90-100 in the oder thread about old devices running redstone. you find everything there you need
Ah, found it. Thanks. I just can't create dword-keys with InteropTool. But you mentioned, that there could be coming a fix/tweak in the next version of the InteropTool. Perhaps, I will just wait. ^^
there wont, gus isnt able to fix some write issues. without massstoragemode the only way to change them is custompfd + custompfd remote on your desktop
How is the performance? Does x20 devices run better with redstone?
@tofuschnitte:
Okay, I'll try that. But is there a way to enable the glance-setting, which should be in "personalisation"? Perhaps that would be enough?
(And a tweak in the InteropTools to quickly change the registry to, let's say the Lumia 950 oder 830 would be nice. )
Hello,
i know that Redstone won´t work on that device, but i have been told that some previouse versions of Windows 10 mobile worked on it. Can you please give me some advice on how i can get a compatible version ?
Windows Insider App is already installed and i joined the fast ring. However, no updates are shown if i try to update in settings.....
Please help!
Regards,
impact 79
impact79 said:
Hello,
i know that Redstone won´t work on that device, but i have been told that some previouse versions of Windows 10 mobile worked on it. Can you please give me some advice on how i can get a compatible version ?
Windows Insider App is already installed and i joined the fast ring. However, no updates are shown if i try to update in settings.....
Please help!
Regards,
impact 79
Click to expand...
Click to collapse
At this time there's no way longer presents for your phone .
you have to wait for Boot Loader unlock . by the latest news you should heard about it (Microsoft accidently published their secure boot golden key) it must no longer takes to the hack release then you can use upgrade advisor and registry hack to upgrade to TH2 (10586 build of windows 10)
The link contains cabs download link for updating from latest wp8.1 to windows 10 mobile 10586.107. For Lumia 630 (RM-978) .
Using iutool to push cab files to the phone .Then check update for 10586 in settings.
Waitting for RS on L630 too...
fishersfish said:
The link contains cabs download link for updating from latest wp8.1 to windows 10 mobile 10586.107. For Lumia 630 (RM-978) .
Using iutool to push cab files to the phone .Then check update for 10586 in settings.
Waitting for RS on L630 too...
Click to expand...
Click to collapse
Is there a link for .cab files of RM-976?
BlueTR said:
Is there a link for .cab files of RM-976?
Click to expand...
Click to collapse
Sorry, I don't have one. I only captured the update links for myself before.
fishersfish said:
Sorry, I don't have one. I only captured the update links for myself before.
Click to expand...
Click to collapse
Will it brick my device if i try the RM-978 files on my RM-976 ?
impact79 said:
Will it brick my device if i try the RM-978 files on my RM-976 ?
Click to expand...
Click to collapse
I am just a guy who like flashing roms. I am not sure, it may not. ( Mine is a Dual-SIM module ,yours is of single SIM )
Just tried to flash those files on my RM-976. Unfortunately the update stops with ERROR 0x800b0100.
Seems that the windows security .dll files are not properly registered.
Do i have to unlock the phone or something else before trying to flash ?
impact79 said:
Just tried to flash those files on my RM-976. Unfortunately the update stops with ERROR 0x800b0100.
Seems that the windows security .dll files are not properly registered.
Click to expand...
Click to collapse
iutool doesn't need anything else to be done before pulling update files to the phone
Iutool Error Codes
https://msdn.microsoft.com/en-us/library/windows/hardware/mt131833(v=vs.85).aspx
"TRUST_E_NOSIGNATURE" means what? Maybe someone knows it.
I am getting 0x801882c1 error code while installing updates any idea about this? Error code specifies 0x801882C1 E_CABAPI_NOT_CABINET BTS_E_PER_APP_REQUEST_LIMIT_REACHED not really sure what that means. Downloaded all files twice and tried.
---------- Post added at 09:25 PM ---------- Previous post was at 09:04 PM ----------
KillerTheLord said:
I am getting 0x801882c1 error code while installing updates any idea about this? Error code specifies 0x801882C1 E_CABAPI_NOT_CABINET BTS_E_PER_APP_REQUEST_LIMIT_REACHED not really sure what that means. Downloaded all files twice and tried.
Click to expand...
Click to collapse
Solved this by deleting extra Desktop.ini file. How getting same error as above 0x800b0100.
Readstone can be run on Lumia 630 (512MB RAM) ! The update packages( cab files) can be downloaded from catalog.update.microsoft.com ( search your phone carrier name, like mine: 000-HK ), queue by time ,add 14343 to bucket and download .( other items for 10586 and erlier version; there SHOULD HAVE the links for upgrading from wp8.1 to 10586.107 ). If you can not click to download , view the poped-up webpage's source then copy and sort the download links by yourself.
You only need to download the files similar to the files you grabbed when updating 10586.107 to 10586.545. OR similar to the files in my attachment. It seems that difference to OS language packages can be ignored.
*.cbs_*.cab files are for FULL update, maybe they can be used on 10586.545 ; *.cbsu_*.cab files must can be used on 10586.545. They CANNOT be used at the same time, I update failed once due to this.
Replace IME and Speech data packages with yours.
Use iutool.exe to push cab files to your phone as usual.
If you update failed and your downloaded files are not broken, try to replace thoes files which their name start with or like:
microsoft.devicelayout_qc8x26_16k.mainos.cbs_
microsoft.soc_qc8x26_16k.mainos.cbs_
for other defination, replace this file: microsoft.prerelease_protected.mainos_res_480x800.cbs_*.cab .I am not sure if it can be used on Lumia 630.
Here is my screenshot: SO.....SO exciting!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@fishersfish:
sounds great, thanks for sharing!
However, i don´t understand completely yet. I have Win Phone 8.1 Update (8.10.14234.375) on my Lumia 630 (Carrier 000-DE).
Which files do i have to download ?
fishersfish said:
Readstone can be run on Lumia 630 (512MB RAM) ! The update packages( cab files) can be downloaded from catalog.update.microsoft.com ( search your phone carrier name, like mine: 000-HK ), queue by time ,add 14343 to bucket and download .( other items for 10586 and erlier version; there SHOULD HAVE the links for upgrading from wp8.1 to 10586.107 ). If you can not click to download , view the poped-up webpage's source then copy and sort the download links by yourself.
You only need to download the files similar to the files you grabbed when updating 10586.107 to 10586.545. OR similar to the files in my attachment. It seems that difference to OS language packages can be ignored.
*.cbs_*.cab files are for FULL update, maybe they can be used on 10586.545 ; *.cbsu_*.cab files must can be used on 10586.545. They CANNOT be used at the same time, I update failed once due to this.
Replace IME and Speech data packages with yours.
Use iutool.exe to push cab files to your phone as usual.
If you update failed and your downloaded files are not broken, try to replace thoes files which their name start with or like:
microsoft.devicelayout_qc8x26_16k.mainos.cbs_
microsoft.soc_qc8x26_16k.mainos.cbs_
for other defination, replace this file: microsoft.prerelease_protected.mainos_res_480x800.cbs_*.cab .I am not sure if it can be used on Lumia 630.
Here is my screenshot: SO.....SO exciting!!!
View attachment 3844880
Click to expand...
Click to collapse
impact79 said:
@fishersfish:
sounds great, thanks for sharing!
However, i don´t understand completely yet. I have Win Phone 8.1 Update (8.10.14234.375) on my Lumia 630 (Carrier 000-DE).
Which files do i have to download ?
Click to expand...
Click to collapse
Sorry, I didn't find either(Maybe I am just too excited ). But there must be a way! A guy from my country ( China ) just capture a lot of update cabs ( from wp8.1 to w10m ) this month. But not include your phone. He must used an other way.
Here is the guy:
http://bbs.wfun.com/home.php?mod=space&uid=1183465
http://weibo.com/u/1144511064
fishersfish said:
Sorry, I didn't find either(Maybe I am just too excited ). But there must be a way! A guy from my country ( China ) just capture a lot of update cabs ( from wp8.1 to w10m ) this month. But not include your phone. He must used an other way.
Here is the guy:
http://bbs.wfun.com/home.php?mod=space&uid=1183465
http://weibo.com/u/1144511064
Click to expand...
Click to collapse
Hi. Do you still have the Build 10586 for Lumia 630 dual sim 512 ram ?please upload this for me so I can flash it on my phone using WP Internal.please I really need it.
ngame said:
At this time there's no way longer presents for your phone .
you have to wait for Boot Loader unlock . by the latest news you should heard about it (Microsoft accidently published their secure boot golden key) it must no longer takes to the hack release then you can use upgrade advisor and registry hack to upgrade to TH2 (10586 build of windows 10)
Click to expand...
Click to collapse
I have downloaded the cab files and but iutool give me error no update files found
mirasal2 said:
I have downloaded the cab files and but iutool give me error no update files found
Click to expand...
Click to collapse
Seems it's command issue .
iutool -v -p C:\Update\*
this is the exact command for when you put update files in c:\Update folder , Do not forget \* it means install anything presents in this path .
ngame said:
Seems it's command issue .
iutool -v -p C:\Update\*
this is the exact command for when you put update files in c:\Update folder , Do not forget \* it means install anything presents in this path .
Click to expand...
Click to collapse
I'm sorry to tell you it didn't work.
Do I have to extract cab files?
Which version from iutool should use,mine is seems like 2014 version
mirasal2 said:
I'm sorry to tell you it didn't work.
Do I have to extract cab files?
Which version from iutool should use,mine is seems like 2014 version
Click to expand...
Click to collapse
No difference witch version are you using .
and surely you don't have to extract cabs . It the thing that will phone do on prepairing for installation
ngame said:
No difference witch version are you using .
and surely you don't have to extract cabs . It the thing that will phone do on prepairing for installation
Click to expand...
Click to collapse
Could you tell me the steps clearly,please?