[ROM] [HP iPAQ hx2000] [WM6.5] For reference only - Upgrading, Modifying and Unlocking

News about iPAQ ROM development you can find on Spiaatie's Blog
ROMs for iPAQ devices are available on Spiaatie's ROMs
​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​Description:​
- Carefully read all first 3 posts!
- ROM Update Works with Windows - 2000 / XP / Vista / 7
- How to update ROM? Just read README file inside update folder!
- After update make a hard reset!
- Please don't mirror my files anywere else!
- hx2110(5) and hx2410(5) users MUST update ROM in following sequence:
* 1.00.00L -> 1.00.00H -> 1.02.00H -> WM 6.x
THIS ROM WORKS ONLY WITH:
hx2100 series: hx2110 - hx2115 - hx2190 - hx2190b - hx2195 - hx2195b
hx2400 series: hx2410 - hx2415 - hx2490 - hx2490b - hx2495 - hx2495b
hx2700 series: hx2750 - hx2755 - hx2790 - hx2790b - hx2795 - hx2790b
NEVER TRY TO UPDATE hx2490c OR hx2790c - You will brick it!
Click to expand...
Click to collapse
​
​

Always use iPAQ in Pre-BL mode to do the update!
Contacts + iTask + Reset (with stylus)
Release when Pre-BL appers on screen or if You see just white screen
Push Calendar button to get connection with PC
Always HARD-RESET iPAQ after update!
Calendar + Messaging + Power + Reset (with stylus)
Release when Formatting PS.. appers on screen
How to know model number?
It's under battery.
​

My old ROMs and shipped ROMs
​
- You will need these files if you still have WM2003 or WM5 on hx2110(5) / hx2410(5) before You can install WM6.5 Update​
​

Absolutely amazing! Thank you very much for this!!
One question though, is there any possibility of a battery driver coming out?

nate1936 said:
Absolutely amazing! Thank you very much for this!!
One question though, is there any possibility of a battery driver coming out?
Click to expand...
Click to collapse
This version does have a battery driver
I coudn't get them with kitchen - so the kitchen is in trash for a time now

Oh, on second notice, everything seems to work great. You my friend are amazing
EDIT: SMALL TIP FOR EVERYONE
when installing it, make sure you point your hpRUU.ini file to the right file, so that you use the correct rom!

"ERROR 506" hpRUU.ini not found
Greetings and congratulations Spiaatie!
I am very excited about your 6.5 rom. However, as I try to flash I get a "ERROR 506" hpRUU.ini not found. Please advise.

ctlee2211 said:
Greetings and congratulations Spiaatie!
I am very excited about your 6.5 rom. However, as I try to flash I get a "ERROR 506" hpRUU.ini not found. Please advise.
Click to expand...
Click to collapse
Read my previous post, you need to rename the spiaatie_WM_6_5.nbf file to ipaqrom.nbf then get your previous hpRUU.ini from the 6.1 installation along with the .dll driver files

Fffuuuuuuu
Ok, So I looked at the notification que in the Memmaid program, and it said the windows mobile beta is expiring in [30] then [15] and now [7]
Is there a windows mobile 6.5 beta crack so it won't expire?? I love this OS Please help

Stupid question - My Hx2495 is still on WinM5, but I don't need to run the extra HX2110 / HX2410 at all, and just the 6.5 update, correct?

ctlee2211 said:
Greetings and congratulations Spiaatie!
I am very excited about your 6.5 rom. However, as I try to flash I get a "ERROR 506" hpRUU.ini not found. Please advise.
Click to expand...
Click to collapse
I have uploaded new fies.. my mistake - forgot to add them

nate1936 said:
Ok, So I looked at the notification que in the Memmaid program, and it said the windows mobile beta is expiring in [30] then [15] and now [7]
Is there a windows mobile 6.5 beta crack so it won't expire?? I love this OS Please help
Click to expand...
Click to collapse
huh.. how did You get something like that
OS does not expire, there is something wrong with that Memmaid software..

Divine_Madcat said:
Stupid question - My Hx2495 is still on WinM5, but I don't need to run the extra HX2110 / HX2410 at all, and just the 6.5 update, correct?
Click to expand...
Click to collapse
Yes, just run WM6.5 update and that's all

Thanks
Really GREAT work, Thanks!
Everything OK here, it is preferable to do a hard reset after the update.
Then you also have the nice new background etc.
I do have some problems with Outlook though.
For some reason i cannot setup a new account. Bug maybe?
When i choose <Menu> <Tools> <New account> nothing happens.
In <Options> when I tap on New Account... also nothing.
Can anyone confirm this?
Greetings to all.

Dropje said:
Really GREAT work, Thanks!
Everything OK here, it is preferable to do a hard reset after the update.
Then you also have the nice new background etc.
I do have some problems with Outlook though.
For some reason i cannot setup a new account. Bug maybe?
When i choose <Menu> <Tools> <New account> nothing happens.
In <Options> when I tap on New Account... also nothing.
Can anyone confirm this?
Greetings to all.
Click to expand...
Click to collapse
Hard reset is a must
Do I understand right - you try to make an email account?

Yes, i try to setup a new Email account.
Should be an easy task normally.
However I cannot make a new account.

Dropje said:
Yes, i try to setup a new account.
Should be an easy task normally.
However I cannot make a new account.
Click to expand...
Click to collapse
Did You try to make a new one from today screen?
Click on Email and there's a ''Set Up E-mail''
Works for me - succesfully made a gmail account.

Exactly, on the Today screen I clicked on E-mail (Set Up E-mail).
Next thing I see is the messaging screen where I clicked on <Menu> <Tools> <New Account...>. The screen that is coming back is the same as the opening screen.
When I click in the Today screen on Messaging (bottom right) then I get a different screen with <Setup E-mail>. But when I tap I also go back to the wrong screen ("To create a new message, tap Menu, then tap New.").
Normally I should get a screen where I can setup my IMAP Gmail settings. It does m not however. Maybe I should flash again. I came from 6.1 (the newer build).

Dropje said:
Exactly, on the Today screen I clicked on E-mail (Set Up E-mail).
Next thing I see is the messaging screen where I clicked on <Menu> <Tools> <New Account...>. The screen that is coming back is the same as the opening screen.
How did you setup the GMail account, Spiaatie? Thank you in advance!
Click to expand...
Click to collapse
Maybe do a Hard reset once more!
If I click on ''Set Up E-mail'' - I instantly get this screen - check picture

Ah, that screen is what I also expected to see!! Thanks for the picture.
But it clearly does NOT show-up in my case.
Soft reset did not help either
Strange, everything else is working flawlessly.
Will try flasing it again, could be a break in my flashing somehow.
Thank you Spiaati for the quick response!

Related

Loox n520/n500 -wm6 now. for real))

A long awaited wm6 rom for Loox N520/n500
Bugs - fixed
S/W
Removed Windows Live, Catalog, Update, Sql Server, SQM
Added Total Commander, Al Reader, Oxios Memory, Task Manager, Softkey Applet, XCPUSCalar
CE OS 5.2.1620.18125.0.4.2
Replaced some icons
Removed FSC Gps Locator and Voice recorder
Record button calls start menu
Contacts - close/ok; contacts on hold
Calendar - left softkey; calendar on hold
Gps - renamed to messaging, fixed icon - right softkey; messaging on hold
Today - today;rotate screen on hold
A great thanks to misar and cmonex without whose efforts it would be hard to make this wm6 rom, also thanks to freepk for finding new trueffs driver. Well, mostly i want to thank all them just for being good friends
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://rapidshare.com/files/47353024/WM6.7z.htmll - Old Rom. 17944
http://ifolder.ru/3075802 - the new one 18125
http://uploaded.to/?id=8u8hy4 - mirror
http://rapidshare.com/files/50574325/test.7z.html - russian rom 17944
Superb!!
I've installed in my spanish N520 (changing country code previously). At the moment, all is right! I love you, I love misar, I love cmonex, I love freepk... .
One only question, have you in mind to release this rom in another language (maybe spanish)?
Thanks for your effort!!
Hello! WM6 are wonderfull but I have a problem with flashing of my N520. The ROM uprageding is successfully finished but I can not open any image (Error: Cannot load file). That is the reason why I do not see text on Today screen - the wallpaper is white and the text is white too. Then I do not see the control panel in WM Player because the skins are pictures too (I think). The same problem is with start-up logo - I only see white screen.
Do you have any idea why this is happened? Or do you have any possibility how to resolve this problem? The flashing has been done in WinXP, Active Sync 4.5 (firstly Host mode and then Partnership mode too). Previously version of WM was originaly ROM of FS, then I tried to flash AKU 3.5 - there was no problem and after that I tried upgrade to WM6 - but the problem always exist. :-( Please, help me! O
I don`t know what happens. you should flash aku 3.5.2. anyhow on your n500/520,try wm6. if it works - use.if no images - flash wm5
So I flashed aku 3.5.2. and everything works fine. After that I tried to upgrade to WM6 but there was always problem with images. So I have flashed back to aku 3.5.2. :-(
does this rom mean that there is a big chance on the wm6 image releasnig for the N560?
Well, actually the beta w/o gprs is available for n560, on wednesday it will be released by my friend, freepk, at 4pda
http://rapidshare.com/files/45969415/N560.5.2.1437.AKU.0.3.1.WM6.Athena.NoGPRS.rar.html
http://www.mediafire.com/?0z9n36ehynj
http://files-upload.com/406368/N560.5.2.1437.AKU.0.3.1.WM6.Athena.NoGPR.rar.html
are you talking about GPS or GPRS? Because i really need my navigation and can't see it present in the rom for n500 / n520?
Gps works - use your favourite s/w, gps locator removed
sp3dev said:
Well, actually the beta w/o gprs is available for n560, on wednesday it will be released by my friend, freepk, at 4pda
Click to expand...
Click to collapse
Hey sp3dev. seeing how I can't understand russian, can you ask freepk about the BT2.0 idea for me? thanx!!
Probably bluetooth chip doesnt support 2.0, if i have news, i`ll report to you
sp3dev said:
Probably bluetooth chip doesnt support 2.0, if i have news, i`ll report to you
Click to expand...
Click to collapse
N560 was certified by Bluetooth.org for bluetooth 2.0 (link). From the information I gathered, Fujitsu-Siemens went back to bluetooth 1.2 at the time due to backward compatibility issues by all bluetooth 2.0 devices. This problem has been solved nowadays and Windows Mobile devices now have bluetooth 2.0, such as the T830. I have a strange feeling the N560 and T830 uses the same bluetooth chipset. Since you guys have more knowledge on Windows Mobile devices, can you perhaps look into creating a bluetooth 2.0 driver for N560?
Here is a bit more info on this matter.
i placed the rom, working as a charm at this moment..
Praise all you guys that put time and effort in this..
i am having a issue with windows live.. It always wants to use a phone connection.. It doesn't use the default internet connect, e.g. BT or WIFI or AS..
is this configurable?
Can't wait until wednesday..
Will that rom have more apps? e.g. Remotedesktop?
btw, for n560 rom with gprs
http://4pda.ru/forum/attach/920400/N560.C550.WM6.Pups.777_Team.rar
I have been using the wm6 rom for 24 hours now and would like to say that it seriously speeds up my machine.
I would almost say that it is twice as fast..
Besides this i do like to comment on this:
S/W
Removed Windows Live, Catalog, Update, Sql Server, SQM
Added Total Commander, Al Reader, Oxios Memory, Task Manager, Softkey Applet, XCPUSCalar
CE OS 5.2.1437.17944.0.3.1
Replaced some icons
Removed FSC Gps Locator and Voice recorder
Record button calls start menu
Contacts - close/ok; contacts on hold
Calendar - left softkey; calendar on hold
Gps - renamed to messaging, fixed icon - right softkey; messaging on hold
Today - today;rotate screen on hold
Click to expand...
Click to collapse
The today and hold, to rotate doesn't work.. I get a shortcut error.. I do not see any of the other software..
As i am typing.. this is probably a different rom.. haha.. Excuse me
Now i am in trouble..
I tried to flash the N560 with gprs but my machine went BLUESCREEN.. IRQ_LESS_OR_EQUAL.
It was still in transfer mode when my laptop rebooted..
On the 2 bars the top one has like 10%..
I don't know what to do to save my pda?
============ UPDATE ==============
I did a hard reset and works fine again.. Let's retry..
Please discuss n560 in some other thread - my rom is for n520 and it has not got some bugs of n560. so please dont confuse people))) as far as i remember we have sth like "loox n5x0 flash format" or something similiar
No problem..
I'll find a N560 thread..
this one good enough?
http://forum.xda-developers.com/showthread.php?t=294165
what's eith this link?
the link to the "fixed" Rom
http://rapidshare.com/files/47353024/WM6.7z.htmll
i try to download it and i cant open the file? should i change the extension of the file or something?
does this new rom fixed the white today screen?
thx anyway

[Update:08/07/2008]WM6.1 WWE for Asus P525 UC Compliant (OS CE 5.2.20273 AKU 1.3.3)

Hi Guys,
as by-product of my ROM porting (german) for Asus P525 and testing the Windows Mobile Emulator ROM Kitchen I made a new WWE Rom for our beloved P525. It is a OS CE 5.2.20273 build with AKU 1.3.3.
NOTE: The ROM released on 07.08.2008 is UC (User Customization) Compliant. This means that the ROM itself contains no user apps. To generate your own ROM customization config I recommend using SDConfigGen.
For any information about UC configuration see the How-To.
Note: The left softkey is on New SMS as default (can be changed using Start -> Settings -> System -> Soft Key.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
07.08.2008 Update
ADDED: UC Compliancy (see the How-To)
REMOVED: Any non standard apps (no Adobe Reader, no Java, no additional Games, no HTC Audio Manager, no CloseApps or FreeRam)
FIXED: Missing Link for SIM specific Services in Start Menu -> Programs
FIXED: Camera Bug
FIXED: No-Ringing Bug
How to upgrade/update?
PC
Download this package and unpack it.
*Copy BootGalaxy.nb0 to your Mini SD-Card.
Copy ROMGalaxy.nb0 to your Mini SD-Card.
P525
*Press Record + reset. The bootloader will be updated. When finished...
Press Camera button + reset. You should now see the bootloader working.
Wait until you see Press Power Button and Reset....
Restart your P525 using reset
Enjoy!
* (Steps concerning BootGalaxy.nb0)These steps are necessary only once.
If you have done that allready in a previous upgrade/update you can skip that.
Check your Boot-Version: Start -> Settings -> System -> System Information -> Version.
The new Boot-Version is something with 07*******.​
Because all this work costs a lot of time, donations are welcome.
Download
WM6.1_WWE_Asus_P525_UC_CE.OS.5.2.20273.rar
Old Releases:
30.07.2008
Initial Release
Download:
WM6.1_WWE_Asus_P525_CE.OS.5.2.20270.rar
Bugfixes:
Camera is not working (Bugfix)
Phone is not ringing on incoming calls (Bugfix)
I'm downloading your rom at the moment.I will try and give feedback.
Thanks
camera isn't working
Camera Bugfix
@teenking: Thanks for testing. Haven't noticed that. Anyway, here is the bugfix for that.
help me plz
plz help me in my complex proplem ....when i install this ROM my phone didnt ring any more when any one phone me
merci for your help
see u......
@haidar100: Thanks for posting the issue. I'll see into it.
THX
ok thx im waiting
Bugfix: No ringing on incoming calls
Ok, here's the bugfix for the no-ringing problem (Thanks to Alexx~ from asusmobile.ru!)
Update:07.08.2008
UPDATE: 07.08.2008
Details here!​
Thanx a Million
Hey! Thanx for this rom. I updated using the mentioned steps, although i got update failed message at the end.... but the firmware tells me its 07* and i get the wm6.1 boot screen+interface. Dunno if anything has gone wrong or not (so far everything seems to work fine.. came/ring/etc).
Thanx again.
cheers.
cannot download from zshare
seems to be a problem with their site. It keeps looping.
any other mirror
gr8!
Great stuff !!
i'm downloading the file from zshare atm, no problems so far ..
i'll try it out and post again
again thanks a million for the WWE ROM i almost gave up looking for it .. i was sick with the WM5 interface
cheers
I've tested 2 weeks, it works fine overall.
My little comments here :
1.) No word completion for handwriting (but it works for T9).
2.) No xT9
( for 1 & 2 , actually just a registry setting & make word completion available for keyboard / block recognize & xT9 got it's own word completion, T9 either can be removed to save space )
3.) Registry still can be trim (got little extra unused keys)
4.) Memory leak is a problem, normal use only, with all applications closed with task manager after use , always remain @ 20MB~21MB free (maybe it's problem of 20273, i not sure, i just compare it to Alex/sp3dev's UL WM6.1 19581 Rom which normally remain between 23MB~26MB , same applications usage)
5.) Signal (power) can be strengthened.
Hope to see more enhancements on this rom. Cheers !!
@johnsonliow
Thanks for your feedback. I'll see into it.
6.) Last sms lost. this is apply to many roms out there but i don't see this issue happens on UL rom by sp3dev / alex. i don't know how he fix this.
All the best !!
Any updates ?
No, sorry. Haven't had time. Work is making me crazy right now .
I see, busy life busy works.
haha~
Hope to hear from you soon. but overall your rom is working fine.
Asus P525
Please upload on an other file sharing site because i can't download it loops but no downloading. Please i have problems with my windows mobile and i need to upgrade imediatly
Artax2008 said:
Please upload on an other file sharing site because i can't download it loops but no downloading. Please i have problems with my windows mobile and i need to upgrade imediatly
Click to expand...
Click to collapse
i have same problem with you
mirror links pls...

Cavalier 1st WM6.1 Rom (Updated-New Rom uploaded)

UPDATED:
1st ported WM6.1 rom for Cavalier, SYS taken from Blackjack II rom. I have to ditch the Moto Q one since it has problem to work with the ori Cava OEM files. Seems like now all the Settings r functioning ... if not pls report
SCREEN SHOT OF NEW ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Link Will be Here
NEWS
----------------------------
26/09/08
- Cool wz the help of psiess & oldsap .. the eT9 is now working GET IT HERE
24/09/08
-Tried rearranging the excalibur keyboard ... but then the Fn key wont work
23/09/08
- New Rom Uploaded
- Tried compiling new rom, removing some SYS files & adding new programs ---> Setting not working
- Seems like cannot del certain files in SYS, done 2nd rom (see Rom Info)
22/09/08
- New Rom done
INFO ON ROM
----------------------------
1. Full Rom - untouched WM6.1 rom; should contain everything in the full rom shipped (I guess)
2. Customize 1 Rom - have WOWSRS, Total Commander, speed tweak; minus Getting started
Originally Posted by ibeqa
For all of you that have battery issues: discharge your device, shut down the device and than charge it not less than 4-5 hours even if the charge light goes green. Now turn on your device and battery responce should be better (at least worked for me and other people). This is known as battery calibration and it should work.
Click to expand...
Click to collapse
HOW TO
----------------------------
Note: Make sure ur dev is Super CID unlocked, download mtty & do commad below:
CMD> task 32
Level=0 (super CID)
then u r set to flash ur cava
METHOD 1
1. Before flashing make sure you have done hard SSPL, if not pls use the attach SSPL-Hard.zip & do a hard SSPL or refer HERE
2. Flash the rom
------------------------------------
METHOD 2
1. Download ROM
2. Rename RUU_signed.nbh to CavaIMG.nbh
3. Copy to miniSD (miniSD must be below than 2G) which was formatted with FAT32
4. Reboot is bootloader mode (Camera+Recorder+Power)
5. Follow instruction on screen
Click to expand...
Click to collapse
Note: I have not tested this rom full functionality ... if there is bug do report it but i cant promise that it will be fixed.
Links
-------------------------
FULL ROM
-------------------------------------------
Link 1
Mirror
CUSTOMIZE 1
-------------------------------------------------------
Link 1
Mirror
*
*
haha thx ! good job! im wating the link。。。。。
good job! well done
any impressions performance-wise yet? faster? is it stable?
cruzzmz said:
wait ... the links will be here
Click to expand...
Click to collapse
What does this mean? You're uploading it?
Cool! Great job cruzzmz!
nht_max said:
What does this mean? You're uploading it?
Click to expand...
Click to collapse
will be there soon
cruzzmz said:
will be there soon
Click to expand...
Click to collapse
Great!!! I'm waiting for it, seconds and minutes!!!
nht_max said:
Great!!! I'm waiting for it, seconds and minutes!!!
Click to expand...
Click to collapse
maybe i should put a countdown clock up there
cruzzmz said:
maybe i should put a countdown clock up there
Click to expand...
Click to collapse
Suppose you should lol
cruzzmz said:
will be there soon
Click to expand...
Click to collapse
Good man!!! Great work!
cruzzmz said:
HOW TO
1. Before flashing make sure you have done hard SSPL, if not pls use the attach SSPL-Hard.zip & do a hard SSPL or refer HERE
2. Flash the rom
Links
Links will be here soon
Click to expand...
Click to collapse
im always wating for your link.....bro when do you put on the link ? haha very thx
hurrywolf said:
im always wating for your link.....bro when do you put on the link ? haha very thx
Click to expand...
Click to collapse
soon i hope ... after fixing the setting problem
waiting...waiting...waiting...ticktack...ticktack...
BTW, an off topic question, isn't our Cavalier a "he"? 'cos I've seen somewhere addressing him as a "she".
lets pray that Erofich will find a way to fix the setting issue
BTW
profile oso cannot work in setting
hurrywolf said:
haha thx ! good job! im wating the link。。。。。
Click to expand...
Click to collapse
where the ruu?
I'm downloading it, but will not be able to test it until tonight. Gonna have to attend a meeting soon. Will keep you informed If finding any more bug, apart from known ones.
Edit: I just saw a new post by Erofich in the previous thread, maybe I'd better wait a little until you try the new way with shellcelog.dll?
I just went home and flashed my Cava with your rough ROM. First of all, it didn't brick my phone That says, the ROM basically is done, only some issues left to address, and they're as followed:
+ Sounds and Profiles problems as known; Selecting Sounds gives me the "Setting couldn't be opened" but doing the Profiles does allow me to open it; however, I can't either edit any profile or switch among them. The overall system sound is pretty low, may be because of this setting issue.
+ Beam applet inside Connections is able to be opened, but can't be saved when the option's checked, giving the "Settings couldn't be saved".
+ Accessibility applet can't be opened also, giving the error related to accessib.xml, saying that it can't be loaded.
+ Unlike WM6.1 HTC Excalibur I used before, Contacts just doesn't display contacts I've stored on SIM. I also checked the registry key, which is ShowSIM under HKCU\ControlPanel\Phone\ , the value is 1 which's supposed to show SIM contacts as it should, but It doesn't.
+ The OS is not application pre-unlocked, that's not a prob, but maybe the reg key 0000101b under HKLM\Security\Policies\Policies should be pre-changed to 1 to ease the unlock procedure after each HR. You know, to unlock it, PC connection is neccessary to run the tool, so when we're not near one, our apps just boo at us challengingly
+ The Java Manager is probably out of date, I got a new one and it's proven that It's usable with most of java apps I've tried to installe. I couldn't do it with the one that came with the original WM6.0 Cava ROM. Just guess this one is the same, 'cos the version and icon look pretty much identical.
+ After using for a while, when I go to Start menu, out of the blue, the two softkey letters on the bottom bar are just vanished, I can still press them with guess though.
+ The Streaming Media tool seems to be un-usable, 'cos I've tried both WIFI connection and Wired connection (with my PC to the NET, and my Cava to it), but I just can't get it to play any youtube file on m.youtube.com (which it's supposed to be able to handle this).
+ Just my suggestion, but in the official release, maybe you can consider adding those useful tools to the ROM, on my previous WM6.1 Excalibur, they were pre-intergrated and quite useful. I'll attach (some of) them here as well. Here's the list:
. ClockOnTop: http://www.2shared.com/file/3918722/1cac6006/ClockOnTop_QVGA_WM5.html
. SRS WOW XT High Definiton Sound: http://www.2shared.com/file/3918721/85a531bc/SRSWOWHDv12850.html
. Esmertec Java Manager: http://www.2shared.com/file/3918712/378133c5/EsmertecJbed_2008022231.html
. PIE download plugin: http://www.2shared.com/file/3918731/9cbe00fd/SN_PIE_Download_Plugin.html
. Opera Mini 4.1 (requires Java manager- Esmertec, but is a great alternative for PIE): http://www.2shared.com/file/3918738/e562b859/opera-mini-latest-advanced-int.html
Just out of curiosity, why wouldn't you port another newer build of WM, say 19513 or something? 'cos I've seen somewhere in this forum about some new builds for WM-based Smartphones. Maybe those builds are just incompatible with our Cava or something?
Edit: having some prob with the file attaching system, so I'll upload them onto some other file upload service, and just post links to them here.
good work
I threw my cavalier in a corner for nearly 5 onths and now im back on it thanks to this wm 6.1 youve worked so hard to bring us. Thanks. Hopefully i can help by letting out some problems im having with it.
-cant connect to a secured wifi
-couldnt install apps until i did another app unlock but i guess that's normal.
-And have to manually add txt messge call center didnt upload from carrier or sim. Tried to manually add it but only gives errors.
-Also i dont see the built in msn messnager tool i had. Does anyone know where i can find a cab for it?
haitianjac said:
.
-And have to manually add txt messge call center didnt upload from carrier or sim. Tried to manually add it but only gives errors.
-Also i dont see the built in msn messnager tool i had. Does anyone know where i can find a cab for it?
Click to expand...
Click to collapse
I'm having probs with sending SMS, seems message center has not been added as you said. I believe MSN messenger has been replaced by Windows Live in WM6.1, however I don't see it too. I don't use this much so I hardly noticed the absence.

ARTEMIS & LOVE WM6.1 ROM V35 (BLUE) - Build 20924.1.5.0 (Manila2D)

http://translate.google.de/translat...mdisplay.php?f=111&hl=de&ie=UTF-8&sl=vi&tl=en
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ARTEMIS & LOVE WM6.1 ROM V35 (BLUE) - Build 20924.1.5.0 (Manila2D)
ROM 3.15.122.35 CHO ARTEMIS & LOVE 3.15.122.35 ROM FOR ARTEMIS & LOVE
= CE OS 5.2.20924 Build 20924.1.5.0 =
Version of the V35, WM6.1 with Manila2D integration, the main characteristics:
Develop and edit version V34F, the Registry
Change the OS: CE OS 5.2.20924 Build 20924.1.5.0
- ROM V35 taken as the standard color Blue.
- Build new speed rather than get 6Mb PP =
- After Up ROM, it should set them: Opera, GoogleMaps, Eziput and MMS (if necessary) to use
Download:
http://rapidshare.com/files/158448263/ARTE_WM6.1_3.15.122.35_B20924_Manila2D.rar
Password : PhamQuang
almost everything is fine with this rom, but I just want to know how to enable the multiple files selection (drag & select all with stylus) in file explorer. Opal volume control is also not working with this rom.
Pass
PhamQuang
I downloaded this rom and everytime I try to install it I get error 260:Connection.
I have removed my SDHC card and then trying to install it. I am currently using YuE_v11.3_3.15.20755_Lite_M2D_WWE. Kindly help.
Regards,
Kailash
where are password
doudou_gg said:
where are password
Click to expand...
Click to collapse
open your eyes
tejen said:
almost everything is fine with this rom, but I just want to know how to enable the multiple files selection (drag & select all with stylus) in file explorer.
Click to expand...
Click to collapse
[HKEY_CURRENT_USER\ControlPanel\Gestures\Touch]
"Disabled"=dword:1
What about volume control? Does anyone know how to make it work in this rom?
Memory usage
Hello,
what about memory usage after soft reset and after 1-2 days of use ?
Cheers
kailashnj said:
I downloaded this rom and everytime I try to install it I get error 260:Connection.
I have removed my SDHC card and then trying to install it. I am currently using YuE_v11.3_3.15.20755_Lite_M2D_WWE. Kindly help.
Regards,
Kailash
Click to expand...
Click to collapse
Can someone please help me as I wanted to install the above rom in my Phone but get the error 260:Connection
Regards,
Kailash
What worked for me was removing the memory card from the phone.
Whit my 1G normal micro sd card i did get the same error.
after that i uspléd again, en from there all worked normal again.
Hey
can someone let me know what this rom is like for music playing off SDHC card?
Are we still getting a "buffering" pause with audio manager
and is WMP still pausing the music randomly?
Cheers
i test it it works good with wmp i don tuse audio menager so far very good wmp dosent pause or stops
HarryRag said:
What worked for me was removing the memory card from the phone.
Whit my 1G normal micro sd card i did get the same error.
after that i uspléd again, en from there all worked normal again.
Click to expand...
Click to collapse
HI,
Thanks for the suggestion I tried it but to no avail. I removed the card and then run an USPL and then again tried installing the rom. Did now work. Same error 260.
I noticed something strange in this rom but and that is it never starts the Rom update utility where we have to select Next and follow certain steps and then click on Update to update the old rom to new rom. Instead, it directly skips al the steps and reaches the installation step where it automatically tries to start at 0%.
I am not sure if the above said is the reason for this error 260.
Regards,
Kailash
Yingmu said:
[HKEY_CURRENT_USER\ControlPanel\Gestures\Touch]
"Disabled"=dword:1
Click to expand...
Click to collapse
please can you clarify this - what are we meant to be doing in the touch folder - its empty.
thanks
what .net version does it has ???
kailashnj said:
HI,
Thanks for the suggestion I tried it but to no avail. I removed the card and then run an USPL and then again tried installing the rom. Did now work. Same error 260.
I noticed something strange in this rom but and that is it never starts the Rom update utility where we have to select Next and follow certain steps and then click on Update to update the old rom to new rom. Instead, it directly skips al the steps and reaches the installation step where it automatically tries to start at 0%.
I am not sure if the above said is the reason for this error 260.
Regards,
Kailash
Click to expand...
Click to collapse
well what I did my self been having the same problem i flash my artemis with usb cable i download the early version and i removed the rom only the rom file and put the new version on the old folder and i flashed it very good with no problem at all try it i am sure u wont have a problem
Juice05 said:
please can you clarify this - what are we meant to be doing in the touch folder - its empty.
thanks
Click to expand...
Click to collapse
Correct its empty
1. click on edit - New DWORD Value
2. For "Value name" put in "Disabled"
3. For "Value data: put in "1"
4. Press OK
Voila
Juice05 said:
Originally Posted by Juice05
please can you clarify this - what are we meant to be doing in the touch folder - its empty.
thanks
Correct its empty
1. click on edit - New DWORD Value
2. For "Value name" put in "Disabled"
3. For "Value data: put in "1"
4. Press OK
Voila
Click to expand...
Click to collapse
Disable!!!!!!!!!

[Rom] Motorola Surf A3100 6.5WWE biuld 21903 with New M2D_by Chai2porn

[Rom] Motorola Surf A3100 6.5WWE biuld 21903 with New M2D_by Chai2porn
This is my first rom here in www.xda-developers.com
Original rom I made for http://pdamobiz.com/forum/forum_posts.asp?TID=310661&PN=1&TPN=1 in Thailand
This rom I made it WWE so I tool away all Thai Keyboard.
Only Thai Reginal still availble and still set as default
Thanks
www.xda-developers.com
www.pdamobiz.com
Big thanks to Mr.pignew for support me for everythings.
Anyway ** As always flashing this ROM is done at your own risk. Things sometimes can go wrong & I take no responsibility if you brick your device **
SYS/XIP Version
21903
Add/Change
Manilla2D 2.0(Build 1919.1432)
M2DC
HTC Album
HTC Audio Manager
Commanager
psShutXP
Clean RAM
PIM back up 2.8
Opera9.5
Icon
Thai font/ Thai regional
Theme
Dialpad
Wellcome Screen
ETC...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note use WindowsXP to Flash I never try to use another OS to Flash this phone
Need File
1. MB60 USB Driver
2. MB60 DMtool V1.8 Use this toos as Flash tool
3. Radio stack Version/ Bootloader 1.0.20 by Flash this Chinese Rom Use MB60 DMtool V1.8 to flash it.
4. Rom:A3100_Chai2Surf_Full_Biuld21903_WWE This incould MB60 DMtool V1.8 in file
Instuction
1. Full Charging/ Power off
2. Go to download mode by Pass and hold Task ball and Endkey then pass Power on
3. Plug in USB this shuld pop up found new hardware
3. Install USB Driver
4. then check what port has been detect by
Control Panal/System/Hardware/Device Manager/Com Port/ and look for number of Attila port (ex: My port is 22)
5. Flash Chinese Rom after it done
6. Flash Motorola Surf A3100 6.5WWE biuld 21903 with New M2D_by Chai2porn
After first boot Please Clean boot once by Pass and hold Send/End key and then Power on
Know issue
Install This Fix.cab to get the weather update on M2D Home
t4r0moto said:
Thanks now its working
for Map search didn't working
I have type in seacrh coloum but the font won't appears
Click to expand...
Click to collapse
So Sorry
I just saw it won't work in my phone too.
Maybe because I never use it.
Please install Google map.cab to resolve this problem.
Enjoin
chai2porn said:
Know issue
Install This fix.cab to get the weather update on M2D Home
Click to expand...
Click to collapse
URL is invalid
Is it possible to integrate this fix into the ROM?
Can you upload to rapidshare or 4shared?
For Photos and Videos can explore pict & video on SD Card?
also waiting your fix .cab valid link.
thanks
I've edited the link of Fix.cab instead of that invalid URL
I've edited the link of Fix.cab instead of that invalid URL
Hope you guys will like it.
woland_ca said:
URL is invalid
Is it possible to integrate this fix into the ROM?
Can you upload to rapidshare or 4shared?
Click to expand...
Click to collapse
Still have to use it for now I can't find the way to fix into Rom yet.
t4r0moto said:
For Photos and Videos can explore pict & video on SD Card?
also waiting your fix .cab valid link.
thanks
Click to expand...
Click to collapse
Of cause , Photos and Videos can explore pict & video on SD Card.
It's O.k.
This ROM 6.5 or 6.5.3?
Please upload screeen**** Sysinfo OS version.
Thanks.
tellurians said:
It's O.k.
This ROM 6.5 or 6.5.3?
Please upload screeen**** Sysinfo OS version.
Thanks.
Click to expand...
Click to collapse
here we go for your information
its cool
Great works chai2porn
I'm use ROM A3100_WM6.5_23620_TEST.hex.
OS version 6.5.23620 Jan 2010.
Whether probably to update your ROM with the indicated data?
Originally Posted by chai2porn View Post
Know issue
Install This fix.cab to get the weather update on M2D Home
Click to expand...
Click to collapse
I have install fix.cab but still can't get weather update on M2D Home
but in Weather plugin working
pls see pict in attach.
t4r0moto said:
I have install fix.cab but still can't get weather update on M2D Home
but in Weather plugin working
pls see pict in attach.
Click to expand...
Click to collapse
After update install this fix and restart once. that will work.
This fix only can bring The weather plugin from weather tap to display on M2D home.
It's not actuary up date your google location.
what is that
hi your rom lokes great
but i cant install > error id 814
i have tested
A3100_WM65_23656_WWE_M2D & A3100_WM65_23656_WWE_Lite
they work ok
but
Chai2Surf_Full_Build21903_WWE & Chai2Surf_Full_Build_21903_Thai
is giving me error id 814
any help is appreciated
chai2porn said:
After update install this fix and restart once. that will work.
This fix only can bring The weather plugin from weather tap to display on M2D home.
It's not actuary up date your google location.
Click to expand...
Click to collapse
Thanks now its working
for Map search didn't working
I have type in seacrh coloum but the font won't appears
t4r0moto said:
Thanks now its working
for Map search didn't working
I have type in seacrh coloum but the font won't appears
Click to expand...
Click to collapse
So Sorry
I just saw it won't work in my phone too.
Maybe because I never use it.
Please install Google map.cab to resolve this problem.
zakengen said:
hi your rom lokes great
but i cant install > error id 814
i have tested
A3100_WM65_23656_WWE_M2D & A3100_WM65_23656_WWE_Lite
they work ok
but
Chai2Surf_Full_Build21903_WWE & Chai2Surf_Full_Build_21903_Thai
is giving me error id 814
any help is appreciated
Click to expand...
Click to collapse
Because Radio version.
You have to flash Chinese rom before flash my rom?
for me, not work:
1- wifi turn on/off
2- wallpaper section
mohammadj54 said:
for me, not work:
1- wifi turn on/off
2- wallpaper section
Click to expand...
Click to collapse
Yes I knew that, but I use to tap task bar icon instead.
My friend found this :
the alarm only can play WAV file which placed on windows folder
and can't used mp3 files as alarm signal
pls info
thanks
t4r0moto said:
My friend found this :
the alarm only can play WAV file which placed on windows folder
and can't used mp3 files as alarm signal
pls info
thanks
Click to expand...
Click to collapse
ํYes it should be WAV file that could use in Alarm.
It's limited performance for WM alarm.
thanks for your reply.
and found again about XLS Mobile,
can't open docs with password or macros inside
t4r0moto said:
thanks for your reply.
and found again about XLS Mobile,
can't open docs with password or macros inside
Click to expand...
Click to collapse
I'm not sure about this issue, cause I never use kind of this document.
Maybe because limitation of MS office.
I will build other new one within MS Office 2010.
Thanks for your reply
chai2porn said:
I'm not sure about this issue, cause I never use kind of this document.
Maybe because limitation of MS office.
I will build other new one within MS Office 2010.
Thanks for your reply
Click to expand...
Click to collapse
great I will wait for your new ROM
till now I'm still using your ROM and so far is good.
for your new ROM maybe you can fix for Audio Booster since in this ROM did'nt work.

Categories

Resources