Maybe it is already known to some of you but I would like to share that it still possible to upgrade from Windows Phone 8.1 to Redstone if you have a Lumia 920, and to remain the unlocked bootloader with Mass Storage if you use WPInternals. I am assuming this method works for more Lumia x20 devices
My device: Lumia 920
Product code: 059R018
Manumodelname: RM-821-eu-netherlands-315
Steps I took:
-Rolled back device to Windows Phone 8.1 using Windows Device Recovery Tool.
Windows Device Recovery Tool flashed this rom onto my device:
RM821_3051.50009.1424.0005_RETAIL_eu_netherlands_315_05_442325_prd_signed.ffu
-Updated to the latest official Windows Phone 8.1 update for Lumia 920.
-Used WPInternals 1.2 to unlock bootloader and flash SBL3 to enable MassStorage. Partition table of RM821_3051.50009.1424.0005_RETAIL_eu_netherlands_315_05_442325_prd_signed.ffu was used.
-Rooted the device using WPInternals 1.2
-Deployed vcReg_1.5 and used Live Interop Unlock template.
-Deployed customPFD (@Pasquiindustry)
-Modified registry as described here.
-Installed Windows Insider and enrolled for Fast Ring.
-Upgraded to W10 Redstone 10.0.14393.5
-Hardreset after upgrade
The Unlocked Bootloader and MassStorage mode are still working without any problems. I therefore made a full ROM dump (EFIESIP, MainOS, Data) using WPInternals 1.2.
I would upload the ROM but since it is 29GB this would take ages.
(If you have suggestions for where to upload or how to make files smaller, please PM me)
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sure the bootloader stays unlocked, os updates cant lock it again. it stays unlocked till you reflash your phone with the recovery tool (or till the device recieves and ota firmwareupdate, which wont happen for old devices at all)
and i can confirm it works. just compress the archive, will end up in 15gb instead of 30gb. did that last week for my 920 too. the dude here from windowsmania.pl already announced custom roms (which are creatable with wpinternals too and are way smaller, cause in your archive you have the data partition too etc; which you shouldnt upload cause it contains access to the ms account etc you used to configure your device). i only replied cause i wanted to warn you to upload that
Hi Guys
Can someone upload a W10 ROM for the Lumia 920, with unlocked loader and root access. I can only find one on megaNZ , it flashes on the phone without any errors using windows phone internals, but goes into a boot loop with the Nokia logo..
HATA28 said:
Maybe it is already known to some of you but I would like to share that it still possible to upgrade from Windows Phone 8.1 to Redstone if you have a Lumia 920, and to remain the unlocked bootloader with Mass Storage if you use WPInternals. I am assuming this method works for more Lumia x20 devices
My device: Lumia 920
Product code: 059R018
Manumodelname: RM-821-eu-netherlands-315
Steps I took:
-Rolled back device to Windows Phone 8.1 using Windows Device Recovery Tool.
Windows Device Recovery Tool flashed this rom onto my device:
RM821_3051.50009.1424.0005_RETAIL_eu_netherlands_315_05_442325_prd_signed.ffu
-Updated to the latest official Windows Phone 8.1 update for Lumia 920.
-Used WPInternals 1.2 to unlock bootloader and flash SBL3 to enable MassStorage. Partition table of RM821_3051.50009.1424.0005_RETAIL_eu_netherlands_315_05_442325_prd_signed.ffu was used.
-Rooted the device using WPInternals 1.2
-Deployed vcReg_1.5 and used Live Interop Unlock template.
-Deployed customPFD (@Pasquiindustry)
-Modified registry as described here.
-Installed Windows Insider and enrolled for Fast Ring.
-Upgraded to W10 Redstone 10.0.14393.5
-Hardreset after upgrade
The Unlocked Bootloader and MassStorage mode are still working without any problems. I therefore made a full ROM dump (EFIESIP, MainOS, Data) using WPInternals 1.2.
I would upload the ROM but since it is 29GB this would take ages.
(If you have suggestions for where to upload or how to make files smaller, please PM me)
Screenshot
Click to expand...
Click to collapse
I've tried to do it, I unlocked the bootloader and rooted the phone with WP Internals, but I can't deploy xaps with the Windows Phone SDK. I even tried to move it to the phone and install it from file explorer, but it doesn't work. How can I deploy the xaps?
...and this guide still work after closing update for the unsupported device (920, my 925..) ? can you explain this in easymode?
thanks
Easy steps
blackpanther0 said:
...and this guide still work after closing update for the unsupported device (920, my 925..) ? can you explain this in easymode?
thanks
Click to expand...
Click to collapse
You can find it in easy steps here
gakshat14 said:
You can find it in easy steps here
Click to expand...
Click to collapse
Thank you very much!
Is glance screen working? I installed 10.0.14393.5 but can't find the settings anymore.
And would it be wise to change the registry settings back to original after getting the update?
phoenix0_4 said:
Is glance screen working? I installed 10.0.14393.5 but can't find the settings anymore.
And would it be wise to change the registry settings back to original after getting the update?
Click to expand...
Click to collapse
I think if you hard reset the phone, they go back to original. At least mine says it's Lucia 920 and I changed the keys to be lumina 535 to get the update
Ah, okay. Good to know, since I did a hard reset.
Will my Lumia 920 get further updates after changing back to the original settings?
phoenix0_4 said:
Ah, okay. Good to know, since I did a hard reset.
Will my Lumia 920 get further updates after changing back to the original settings?
Click to expand...
Click to collapse
I don't think so, but I'm not using it right now. Probably we'll need to change the values again
Yes, we do. After changing it back to Lumia-830-settings, there is another update.
you need to change the values everytime to get a new os-update, download of speechfiles and keyboardlayout works fine without (but you have to reopt to insiderring if you did a hardreset). i recommend changing the values to the original ones after every update, otherwise the store does crazy thing (atleast did for me)
Okay, did it. Thanks.
Is there a way to get the glance-function back to life? (The option for it in "personalisation" is missing and that one in "extras" is not working anymore.)
You can upload only EFIESP and MainOS without Data, because the last one is useless.
You can flash EFIESP and MainOS even if you are in WP8.1, but keep in mind that you need to do an hard reset via volume keys.
read pages ~90-100 in the oder thread about old devices running redstone. you find everything there you need
Ah, found it. Thanks. I just can't create dword-keys with InteropTool. But you mentioned, that there could be coming a fix/tweak in the next version of the InteropTool. Perhaps, I will just wait. ^^
there wont, gus isnt able to fix some write issues. without massstoragemode the only way to change them is custompfd + custompfd remote on your desktop
How is the performance? Does x20 devices run better with redstone?
@tofuschnitte:
Okay, I'll try that. But is there a way to enable the glance-setting, which should be in "personalisation"? Perhaps that would be enough?
(And a tweak in the InteropTools to quickly change the registry to, let's say the Lumia 950 oder 830 would be nice. )
Related
Hello XDA-Community,
I am back with a new tool for Windows Phone 7 (<3).
The WP7 Easy Backup Tool allows WP7 users to create or restore a backup on the easy way and without hacking skills. The tools wraps the Windows Phone Support Tools to create or restore updates, that means backups are 100% Zune compatible.
This software is still in development, but there is already an stable version.
I've tested with my HD7 and HD2 (depends on the ROM), more test devices would be nice.
This tool requires .NET 3.5, Zune 4.8.2345.0 and Windows Phone Support Tools
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Successful tested on:
HTC HD7 (original HTC ROM)
HTC HD2 (Back to the Future ROM, xmb Rom 7740.16)
HTC 7 Mozart
HTC Arrive
HTC Titan
Samsung i917
Dell Venue Pro
Samsung Omnia 7 (I8700)
Nokia Lumia 800
Samsung Focus S
WARNING: The Tool didn't cares about previous backups! Please save your backups as first step.
Your backup should be stored here: "%localappdata%\Microsoft\Windows Phone Update\"
WARNING #2: THE BACKUP PROCESS COULD LEAD TO A FAILURE ON CUSTOM ROMS! ZUNE AND ZUNE UPDATES NEED TO BE SUPPORTED BY YOUR CUSTOM ROM.
HINT: The backup process could take up to 1h depending on your device.
IF YOU STUCK DURING THE BACKUP PROCESS IT'S NOT NECESSARY TO HARDRESET. REMOVE YOUR BATTERY AND BOOT NORMAL. (Sorry rubbish ;()
Use this software at your own risk
Please give me feedback on bugs or feature requests.
You found a bug? Okay, I need a description, device informations and your Zune version to kill that thing
DOWNLOAD
If you get the message: "There was a known problem with your Windows Phone Support Tools. Do you want to open the Microsoft Knowledge Base to get fix?" follow this instructions! Otherwise you can download the Windows Phone Support Tools here: http://forum.xda-developers.com/showpost.php?p=20161548&postcount=40
This Tool does full backup how Zune?
Looks nice and simple!
minep said:
This Tool does full backup how Zune?
Looks nice and simple!
Click to expand...
Click to collapse
Thank you
Yes, its also full compatible to Zune. The tools uses similar mechanics. (Faking an update).
I'll use it. Before change registry values, you need use it!
Danke!
Thanks for the app although it seems to not be ready for prime time yet
I've tried to backup and it seemed to show progress while phone (having rebooted itself) was showin 'do not disconnect' graphics. After the progress bar has reached 100% the phone was still at 'do not disconnect' stage so I've waited 10 minutes and unplugged it. It was still showing the same graphics. So I rebooted few times to only see the same 'do not disconnect' thing. So (being a bit worried at this stage) I've pressed factory reset buttons combination (worked) then exited it and only then phone booted normally. I have Focus with 7720 firmware.
rubbish said:
Thanks for the app although it seems to not be ready for prime time yet
I've tried to backup and it seemed to show progress while phone (having rebooted itself) was showin 'do not disconnect' graphics. After the progress bar has reached 100% the phone was still at 'do not disconnect' stage so I've waited 10 minutes and unplugged it. It was still showing the same graphics. So I rebooted few times to only see the same 'do not disconnect' thing. So (being a bit worried at this stage) I've pressed factory reset buttons combination (worked) then exited it and only then phone booted normally. I have Focus with 7720 firmware.
Click to expand...
Click to collapse
Same thing. Had to pull batt out to get it to restart...
Sorry guys ;( Which Zune version you are running? I had no problems with 4.8.2345.0
MarcHoover said:
Hello XDA-Community,
This software is still in development, but there is already an stable version.
I've tested with my HD7 and HD2 (depends on the ROM), more test devices would be nice.
DOWNLOAD
Click to expand...
Click to collapse
notice the bold part
what ROM were u using on HD2?
Update:
+ Bugfix: Progressbar, no 100%-flapping before the process starts.
+ Text added: "IF YOU STUCK DURING THE BACKUP PROCESS IT'S NOT NECESSARY TO HARDRESET. REMOVE YOUR BATTERY AND BOOT NORMAL."
+ Buttons now locked instant after clicking "Backup" or "Restore". (Could lead to multiple backup / restore processes)
Please Re-Download if you want the update.
jcsy said:
notice the bold part
Click to expand...
Click to collapse
Yes, sir
jcsy said:
what ROM were u using on HD2?
Click to expand...
Click to collapse
Back to the Future - Updateable ROM by Yuki / XBMod
So this does a FULL backup? Will keep interop unlock, etc? Because my current backup/restore setup is really inconvenient. Would be great if this works .
Sent from my mwp6985 using XDA Windows Phone 7 App
anyone knows if its working with Toucht-It or DFT Roms?
lucas.scott said:
So this does a FULL backup? Will keep interop unlock, etc? Because my current backup/restore setup is really inconvenient. Would be great if this works .
Sent from my mwp6985 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Its a "FULL" backup (OS, messages, savegames, apps) except Zune content like music or videos.
Tried it with an HTC 7 Mozart, also restored and noticed that if you go into your messages and try sending a message to someone. The message does then not come up in the history. If you also get a message from someone, it doesn't save either. So it's like you have had no messages what-so-ever.
If that makes sense? Not sure if that is a problem with this tool.
Edit: I removed the battery, put it back in and booted it back up. Corrected the date and time and seems to be working again!
MattGarner said:
Tried it with an HTC 7 Mozart, also restored and noticed that if you go into your messages and try sending a message to someone. The message does then not come up in the history. If you also get a message from someone, it doesn't save either. So it's like you have had no messages what-so-ever.
If that makes sense? Not sure if that is a problem with this tool.
Edit: I removed the battery, put it back in and booted it back up. Corrected the date and time and seems to be working again!
Click to expand...
Click to collapse
Yepp, if you restore a backup your time will also be "restored". You have to correct it by yourself.
This seems similar to this one.
http://forum.xda-developers.com/showthread.php?t=1346276
Backup doesn't work on HTC Titan X310e
There was a restriction in the data flow.
There was a one way arrow with a red cross above the drawing of the usb cable.
ECKcornelis said:
There was a restriction in the data flow.
There was a one way arrow with a red cross above the drawing of the usb cable.
Click to expand...
Click to collapse
Hum,...
Okay, I need more information about your phone (ROM, WP7 Version) and your Zune version.
HTC HD7 Mozart DF Rom V3
After Backup phone not restart stock on boot screen after 5 min. i have diconect and battery remove and the phone is not running up to os i must install the rom new and i want to take the restore but restore doesnt want to work
Backup doesn't work on HTC Titan X310e
As you requested.
HTC titan x310e
WP 7.5 version 7.10.7720.68
Zune 4.8.2345.0
UPDATE!
since ms is releasing full rollups of windows 10 mobile in windows update catalog, i'll start to collect and post full rollup links.
TH2:
10586.873 (10.04.2017) (offline: 3944 downloads)
10586.916 (05.05.2017) (offline: 978 downloads)
10586.962 (12.06.2017)
10586.1007 (11.07.2017)
10586.1045 (07.08.2017)
10586.1106 (11.09.2017)
10586.1176 (09.10.2017)
RS1:
14393.1066 (11.04.2017)
14393.1198 (05.05.2017)
14393.1358 (12.06.2017)
14393.1480 (11.07.2017)
14393.1593 (07.08.2017)
14393.1715 (11.09.2017)
14393.1770 (09.10.2017)
14393.1884 (15.11.2017)
14393.1944 (11.12.2017)
14393.2007 (06.01.2018)
14393.2068 (14.02.2018)
14393.2126 (20.03.2018)
RS2:
15063.251 (24.04.2017)
15063.297 (09.05.2017)
Total Download Count: 23258+
the screenshot shows the structure after using my personal build sorting script (powershell):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
old post:
Code:
hi everyone.
please participate in collecting cab update links for more devices/builds and i will add your pastebin links here.
i am starting it and hope you'll help me. collect links with [URL="http://www.telerik.com/download/fiddler"]fiddler[/URL] (only works from wp8 to w10m).
you need to be running the exact build for the update on your phone.
download/open windows insider app and apply to fast ring.
check for updates to download the insider fast configuration update. when it is preparing for update, disable wifi.
after the installation of the preparation update (gears), you're ready to push the cabs.
they can be pushed to the phone with iutool.exe via admin cmd
command: "C:\Program Files (x86)\Windows Phone Kits\8.1\Tools\bin\i386>iutool.exe -v -p c:\cabs"
[URL="http://forum.xda-developers.com/windows-phone-8/development/tools-wdk-wpak-wpdk-cabs-building-wp8-t3183972"]WDK,WPAK,WPDK (containing iutool.exe)[/URL]
put cabs you want to push to c:\cabs folder (create it). only update step by step, build by build.
phone might spit out a error but you can see in settings->update that it is preparing to update and rebooting automatically afterwards.
if you face iutool connection problems, disconnect the device in devices&printers and unplug/plug in usb cable again.
if you want to participate, only enable [URL="http://www.telerik.com/download/fiddler"]fiddler[/URL] right before you hit the "download update button" (check with edge browser if it works first).
that means, when it is checking for updates, it shouldn't use proxy yet.
otherwise windows update can't find any updates and you won't be able to capture them duh..
for general connection problems, install [URL="http://go.microsoft.com/fwlink/?LinkID=525569"]windows device recovery tool[/URL] (contains wp8 device drivers).
to collect cabs easily, save pastebin content to a txt file and open the list with [URL="http://www.freedownloadmanager.org/download.htm"]free download manager[/URL] for example.
[B]warning: the cab update collections are chipset (SOC)/display resolution/language/softkeys dependent.
you might be able to collect all your needed soc/res/lang/softkeys cabs for a unlisted device if you select carefully.
the language files are resolution independent so you can take the ones your device needs from other devices too.
to find out which langs your device needs, capture the update progress once with [URL="http://www.telerik.com/download/fiddler"]fiddler[/URL] and write it down.
a alternative that does not involve downgrading again to wp81 would be to mount your device's ffu rom file to check langs/soc/res (sk should be obvious).
preparation updates can contain device specific packages so only apply them to the correct device.
it is possible that on branded devices, this procedure fails.[/B]
[B]qc8974[/B]
[B]1080x1920[/B]
[B]softkeys[/B]
[B]HTC One M8 for Windows (0P6B140_TMOUS)[/B]
14203-14219 -> [URL="http://pastebin.com/pxxGeBEY"]LINK[/URL] (preparation update)
14219-10536 -> [URL="http://pastebin.com/hY3CiQ2W"]LINK[/URL]
14219-10549 -> [URL="http://pastebin.com/srawxsbT"]LINK[/URL]
14219-10572 -> [URL="http://pastebin.com/SWR2VKwT"]LINK[/URL]
14219-10581 -> [URL="http://pastebin.com/LqGbSZdv"]LINK[/URL]
14219-10586.11 -> [URL="http://pastebin.com/2QRtURXL"]LINK[/URL]
[B]hardkeys[/B]
[B]Nokia Lumia 930 (RM1045_059W1K8_000-CH_MV)[/B]
14226-10166 -> [URL="http://pastebin.com/QjfH6fa6"]LINK[/URL]
14226-10536 -> [URL="http://pastebin.com/2zf0u4iw"]LINK[/URL]
14226-10549 -> [URL="http://pastebin.com/d83zSGH0"]LINK[/URL]
14226-10572 -> [URL="http://pastebin.com/0bAQnLtd"]LINK[/URL]
14226-10581 -> [URL="http://pastebin.com/5TBxd2DX"]LINK[/URL]
14226-10586.11 -> [URL="http://pastebin.com/dbLJ9qyM"]LINK[/URL]
[B]Nokia Lumia 1520 (RM-940_059T5X9_AT&T) (you can disregard any "attwifi" cabs if you're not on AT&T)[/B]
14219-10549 -> [URL="http://pastebin.com/DWnKF1aX"]LINK[/URL]
10572-10581 -> [URL="http://pastebin.com/CyzWHDsQ"]LINK[/URL]
[B]qc8960[/B]
[B]768x1280[/B]
[B]hardkeys[/B]
[B]Nokia Lumia 1020 (RM875_059T7V7_eu_euro2_332)[/B]
12393-14226 -> [URL="http://pastebin.com/RF79E2B8"]LINK[/URL] (preparation update)
14226-10166 -> [URL="http://pastebin.com/KwCJQ7R0"]LINK[/URL]
14226-10536 -> [URL="http://pastebin.com/p7bp4qha"]LINK[/URL]
14226-10549 -> [URL="http://pastebin.com/7BfPQfna"]LINK[/URL]
14226-10572 -> [URL="http://pastebin.com/aNPTwEJm"]LINK[/URL]
14226-10581 -> [URL="http://pastebin.com/P2tfRamJ"]LINK[/URL]
14226-10586.11 -> [URL="http://pastebin.com/YC6uLCrR"]LINK[/URL]
[B]qc8x26[/B]
[B]480x800[/B]
[B]softkeys[/B]
[B]Nokia Lumia 635 [512MB ram] (RM-974_059W747_000-CH)[/B]
14219-10536 -> [URL="http://pastebin.com/84uu2gTy"]LINK[/URL]
14219-10572 -> [URL="http://pastebin.com/YSFspNKh"]LINK[/URL]
14219-10581 -> [URL="http://pastebin.com/YjH6X1KR"]LINK[/URL]
14219-10586.11 -> [URL="http://pastebin.com/nN2TT2YR"]LINK[/URL]
[B]720x1280[/B]
[B]hardkeys[/B]
[B]Nokia Lumia 830 (RM-984_059X0J5_000-CH)[/B]
15148-10581 -> [URL="http://pastebin.com/6RdbXHE9"]LINK[/URL]
15148-10586.11 -> [URL="http://pastebin.com/hQzY4S7g"]LINK[/URL]
reserved post 2
Looks like the lumia 1520 and the M8 are the same all around... what are the odds I can use these cabs to get from 10166 to 10572?
i tried to update from 10536 to 10572 and it didn't work even if they are full canonical cabs (spkg).
from wp81 to w10m it should work. but if you have a branded device, it might fail.
HD2Owner said:
i tried to update from 10536 to 10572 and it didn't work even if they are full canonical cabs (spkg).
from wp81 to w10m it should work. but if you have a branded device, it might fail.
Click to expand...
Click to collapse
Eh, I can do that just by choosing fast ring. Trying to get to 10572 while preserving Astoria. Ah well, guess I have to wait to the next fast ring push, which should solve the upgrade bug.
Hi,
First thanks for making this thread and really need to track update logs.
But why you/other people's still are linking/downloading wp8.1 OEM kit ? Since Windows 10 Mobile OEM kit is public kit.
And 8.1 KIT is huge size of 4-5 GB.
Just grab the WDK 10, it's only 600 MB. (Included all most of the files even oem certs, Updated tools, like FFUTool for profile mode etc.)
I hope that help to you/all other peoples always.
Btw I've most interesting things/research base on these tools, bringing very soon.
EDIT: Links added
Windows Driver Kit for Windows 10:
Download
OR official Page for Download All other tools.
https://msdn.microsoft.com/en-us/windows/hardware/dn913721.aspx
djamol said:
Hi,
First thanks for making this thread and really need to track update logs.
But why you/other people's still are linking/downloading wp8.1 OEM kit ? Since Windows 10 Mobile OEM kit is public kit.
And 8.1 KIT is huge size of 4-5 GB.
Just grab the WDK 10, it's only 600 MB. (Included all most of the files even oem certs, Updated tools, like FFUTool for profile mode etc.)
I hope that help to you/all other peoples always.
Btw I've most interesting things/research base on these tools, bringing very soon.
Click to expand...
Click to collapse
Link?
Thanks! Maybe now I can complete the update of my 640 to build 10536. It looked like that was pulled from the Fast Ring after the release of 10549 and 10572, so any devices still on Slow Ring build 10166 were stuck in an endless update loop when going to the Fast Ring.
How can install this cab files? i have lumia 635 512mb ram please somebody help me
snickler said:
Link?
Click to expand...
Click to collapse
Updated previous post and added links.
djamol said:
Updated previous post and added links.
Click to expand...
Click to collapse
Yeah, I didn't realize.. I installed the AIK a while back, so I had the tools installed .
10581 links added
let me know if a build rollup with all cabs combined and sorted with descriptions would be appreciated.
i did that already for build 10581 now.
I'm getting error 0x80188302, google says it's E_PACKAGE_ALREADY_INSTALLED. Is there any way to track or ignore package collisons?
t4m4m0 said:
I'm getting error 0x80188302, google says it's E_PACKAGE_ALREADY_INSTALLED. Is there any way to track or ignore package collisons?
Click to expand...
Click to collapse
leave out the studyid package(s). those are the needed windows insider configuration updates.
you might have this/those installed already .
Saw this article after I did the update to 10581. Need file list for Lumia 920 (RM-820_nam_att_100) to restore astoria.
So how do I install a group of these cabs to get to 10536 from 8.1?
edit: Can I just use iutool from win 8.1? I haven't been in the win8m scene, just fooled around with win10m.
loudog3114 said:
So how do I install a group of these cabs to get to 10536 from 8.1?
Click to expand...
Click to collapse
yes. enable wifi and open windows insider app. when you see the ring selection (fast/slow),
disable wifi via notification center. then apply to fast ring. device will reboot.
then you should be ready to push cabs. after cab transfer, iutool says "update started".
then it will spit out a error but if you go to settings-> update, you can see that it is preparing for update.
the phone will automatically reboot after update preparation and apply the cabs (shows gears).
followed by migrating data as usual.
HD2Owner said:
yes. enable wifi and open windows insider app. when you see the ring selection (fast/slow),
disable wifi via notification center. then apply to fast ring. device will reboot.
then you should be ready to push cabs. after cab transfer, iutool says "update started".
then it will spit out a error but if you go to settings-> update, you can see that it is preparing for update.
the phone will automatically reboot after update preparation and apply the cabs (shows gears).
followed by migrating data as usual.
Click to expand...
Click to collapse
Awesome. I had resigned myself to having to use 10166 if I wanted astoria but I am going to give this a go now.
Hello,
this is a guide to unlock bootloader!
Prerequisites:
WPInternals: http://www.wpinternals.net/index.php/downloads (Download the latest one, 1.2)
WDRT: http://go.microsoft.com/fwlink/?LinkID=525569 (Needed for drivers)
HEX loaders: Link
FFU Image of your phone (You can download it from WDRT or from the site www.lumiafirmware.com)
SBL3 Engineering: Link
(SBL3 is supported only on: L520-620-625-810-820-822-920-925-1020)
Optional:
OSFMount: http://www.osforensics.com/tools/mount-disk-images.html
Procedure:
1) Download and install Windows Device Recovery Tool (WDRT)
2) Download Windows Phone Internals (WPInternals) and extract that in a folder (for example C:\WPInternals)
3) Create a folder named "Loader" into C:\WPInternals
4) Download HEX loaders and extract it in the folder previously created.
5) Download SBL3 engineering archive (Only if you device is in supported list)
6) Create a folder named "SBL3" into C:\WPInternals and extract the SBL3 Engineering archive.
7) Download FFU image of your phone from WDRT or from lumiafirmware.com
You should get this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Optional:
Now, connect your Windows device and start WPInternals:
Go to "Unlock bootloader" (on the left) and press ok, your phone will be rebooted into flash mode:
After entering flash mode you should do:
The first one you need to select an FFU image
(If you downloaded it from WDRT, go to C:\ProgramData\Microsoft\Packages\Products\RM-xxx\ and select the ffu image file. WARNING: ProgramData is an hidden folder!)
The second one, select the folder "C:\WPInternals\Loader"
The third one, if you device is supported, select your SBL3 Engineering image (In my case, Lumia 920) from the folder "C:\WPInternals\SBL3".
BEWARE that you can brick you phone if you flash the wrong image.
You should get this:
Now press continue and wait.
DONE! You have successfully unlocked your phone!
If you flashed the SBL3 image, you can access to Mass Storage Mode.
Reserved for BCD editing guide
Reserved.
Is there a way to do this on other version of WM 10 than the ones supported by WP Internals?
dape16 said:
Is there a way to do this on other version of WM 10 than the ones supported by WP Internals?
Click to expand...
Click to collapse
Should work on all versions of W10M
is it necessary for what?
Satirus said:
is it necessary for what?
Click to expand...
Click to collapse
Editing BCD, creating custom roms, and so on (and someone expert can create custom rom based on android for example!)
ADeltaX said:
Editing BCD, creating custom roms, and so on (and someone expert can create custom rom based on android for example!)
Click to expand...
Click to collapse
Thanks for your kind reply. That's massive!
Should we at least hope for this to happen with x4x models?
Lanex777 said:
Should we at least hope for this to happen with x4x models?
Click to expand...
Click to collapse
yes
I have a question about the tutorial unlock bootloader in lumia 520
have lumia 520 build 10586.242 windows 10 mobile and my question is work tutorial in the version build ?
and can use files xap ?
chinitopex said:
I have a question about the tutorial unlock bootloader in lumia 520
have lumia 520 build 10586.242 windows 10 mobile and my question is work tutorial in the version build ?
Click to expand...
Click to collapse
Yes, it should work with that version.
chinitopex said:
and can use files xap ?
Click to expand...
Click to collapse
You mean interp unlock?
ADeltaX said:
chinitopex said:
I have a question about the tutorial unlock bootloader in lumia 520
have lumia 520 build 10586.242 windows 10 mobile and my question is work tutorial in the version build ?
Click to expand...
Click to collapse
Yes, it should work with that version.
Click to expand...
Click to collapse
Beware! I just tried unlocking the bootloader of 10586.242 on a Lumia 925 (RM-892) and got stuck at "Sending Loader". Next I'll go the recommended way:
Flash a Windows Phone 8.1 FFU
Run Windows Update until you have at least version 8.10.14219.341 of the OS
Unlock the bootloader using an Engineering SBL3 (only possible on compatible phones)
Run the Windows Insider tool and update to Windows 10 Mobile, possibly needs to run Windows Update a couple of times for the latest build
Enable Root Access directly on the phone
Bonus: Create a Cusom ROM
// update:
After several failed attempts (*aaaahahhhrhhrrgggg!!!!111111eleven*) I finaly got it:
Drivers from the Nokia Care Suite and the correct(tm) loader ftw.
.
ADeltaX
i dont have interp unlock in my lumia 520
so I cant use files xap in the moment and Swordfishx86 Remember my phone is lumia 520
so, thank you guys
chinitopex said:
[...] Swordfishx86 Remember my phone is lumia 520
Click to expand...
Click to collapse
My previous post was merely a report from my experience with wpInternals and not directed at you especially.
Swordfishx86 said:
Beware! I just tried unlocking the bootloader of 10586.242 on a Lumia 925 (RM-892) and got stuck at "Sending Loader". Next I'll go the recommended way:
Flash a Windows Phone 8.1 FFU
Run Windows Update until you have at least version 8.10.14219.341 of the OS
Unlock the bootloader using an Engineering SBL3 (only possible on compatible phones)
Run the Windows Insider tool and update to Windows 10 Mobile, possibly needs to run Windows Update a couple of times for the latest build
Enable Root Access directly on the phone
Bonus: Create a Cusom ROM
// update:
After several failed attempts (*aaaahahhhrhhrrgggg!!!!111111eleven*) I finaly got it:
Drivers from the Nokia Care Suite and the correct(tm) loader ftw.
.
Click to expand...
Click to collapse
I forgot to add more info about the possibility of getting stuck on "Sending Loader", thank you
chinitopex said:
ADeltaX
i dont have interp unlock in my lumia 520
so I cant use files xap in the moment and Swordfishx86 Remember my phone is lumia 520
so, thank you guys
Click to expand...
Click to collapse
Enabling Root Access should give you interop unlock!
ADeltaX said:
Enabling Root Access should give you interop unlock!
Click to expand...
Click to collapse
Thanks Adeltax
About Enabling Root Access interop unlock
you can tell me how i can make this in my lumia 520 ?/ please
chinitopex said:
Thanks Adeltax
About Enabling Root Access interop unlock
you can tell me how i can make this in my lumia 520 ?/ please
Click to expand...
Click to collapse
Go on "Enable Root Access", an click on Unlock Phone. It should work.
PS: You need an engineering SBL3.
ADeltaX said:
Go on "Enable Root Access", an click on Unlock Phone. It should work.
PS: You need an engineering SBL3.
Click to expand...
Click to collapse
I can use the SBL3 Engineering that are above?
and thank you so much
Mod edit:
Content has been removed, plagiarism is not condoned on XDA.
Good Job!
Sent from my Q10 using XDA-Developers mobile app
I stopped months ago at .107.
Windows 10 in MS Lumia 530.
Hi,
After W10 is installed in L530, how does it work? Smoothly? There are somes issues that we should to know? Where we can see a video?
Thanks in advance.
cmolinap said:
Hi,
After W10 is installed in L530, how does it work? Smoothly? There are somes issues that we should to know? Where we can see a video?
Thanks in advance.
Click to expand...
Click to collapse
Hi
I can't post any external links or photos or videos etc. because I'm still junior member on this forum...
It works fine if you don't use a lot of applications at the same time.
That could be the only issue I found so far, because Lumia 530 has only 512 MB RAM. If you use it one app at the time, it works same as W8.1...
And you should limit background apps (in battery saver) to increase battery life (I think that's the problem with W10 on all phones)..
doesnt work in 635 AT&T GoPhone.
Thanks for the tutorial though
hary232 said:
doesnt work in 635 AT&T GoPhone.
Thanks for the tutorial though
Click to expand...
Click to collapse
Before you start, you should find similar phone to yours (same cpu and gpu) among supported W10 phones and use its identifiers to apply them into your registry. I used identifiers of Lumia 535, because it has the same cpu and gpu as my L530...
Works fine on my lumia 530. Finally I got 10586.164 run on the phone.
The next updat to didn't work. Lumia 530 won't use sdcard. Any idea?
On internal drive only 1,3GB free. WIN10 tells me I need more
----
Finally it works - I just do HardReset once morer and same procedure. Thanks Dr_ausgemachten.
Asking about how does it work.
LaCruz said:
Works fine on my lumia 530. Finally I got 10586.164 run on the phone.
The next updat to didn't work. Lumia 530 won't use sdcard. Any idea?
On internal drive only 1,3GB free. WIN10 tells me I need more
----
Finally it works - I just do HardReset once morer and same procedure. Thanks Dr_ausgemachten.
Click to expand...
Click to collapse
Hi LaCruz,
Please, could you give me your opinion as user of a L530 with W10? Is it worth upgrading the L530 to W10 considering that I have to pay $19 to register for Microsoft to unlock the L530.?
One of the reasons for bought it L530 was by the possibility of updating a W10. At the moment, my experience with W8.1 Update 2 is good. But, I always have the idea of upgrading to W10.
Thanks in advance.
Hi, cmolinap.
You dont have to pay anything. See tutorial (step 2) and you will unlock your phone for 2 developer applications. That's all you need!
dr_ausgemachte said:
Found this method on the internet a few days ago, since "vcReg and Extras&Info" method doesn't work any more. Tried and it works!!! I'm new on this forum, so i didn't know how to attach the necessary files at the bottom of the post, and I have inserted the photo with original links for download below the text.
1. Free up some space – The "100-year trick"
You will need a large MicroSD card – at least 4GB.
The updates downloaded alone require around 900MB of space. After it's finished, Windows 10 Mobile build 10586.164 takes 2.46GB on my Lumia 530. We're gonna need more space.
Hard reset your phone
When it comes back up, disable time synchronisation, and set the date to 100 years in the future (e.g. 01/01/2155).
Open the Settings App, and try to open all the various tabs. Many of them will tell you there's a problem, and allow you to uninstall it.
Uninstall any other apps from the All apps screen.
You should have around 1.4GB free space now.
2. Developer Unlock your Lumia 530
Install the Windows Phone 8.1 SDK
If you haven't already, you'll need to register as a developer.
Search for Windows Phone Developer Registration Tool 8.1, and follow the steps to Developer unlock your Lumia 530 (your screen must be unlocked during this procedure!! - set lock screen settings on 5 minutes or so).
Go to the app store, and install the Windows Insider and Preview for Developers app.
Open up Storage Sense, and move Preview for Developers to the SD card.
Make sure Windows Insider remains on your Phone storage; and the default App location is your Phone.
3. Interop Unlock your Lumia 530
Grab and deploy CustomWPSystem_0500. xap and WPSystem_Folder_Unlocker_Release_ARM. xap to your phone (using the Windows Phone Application Deployment 8.1 program from the SDK -> C:\Program Files (x86)\ Microsoft SDKs\ Windows Phone\ v8.1\ Tools\ AppDeploy\ AppDeploy. exe)
Copy CustomPFD_0003. xap to the SD Card
Open up WPSystem_Folder_Unlocker on your phone, and tap "Unlock WPSystem Folder (sdcard)". It should say "Success!"
Open up CustomWPSystem on your phone
Tap the red bar "SD Card permissions", then browse to your SD Card and tap Apply (the tick)
Scroll to the bottom, and tap "Select the XAP".
Pick the CustomPFD_0003. xap file you copied to the SD card.
Tap Apply Xap.
Browse to Preview for Developers in the All Apps list. The icon should have changed.
4. Change your Device Identifiers
Here's the real reason this works: We're going to pretend our humble Lumia 530 is actually a Lumia 535.
Open the Preview for Developers app
Browse to HKLM/SYSTEM/Platform/DeviceTargetingInfo
Change the following keys:
PhoneManufacturer: MicrosoftMDG
PhoneManufacturerModelName: RM-1089_1048
PhoneModelName: Lumia 535
PhoneMobileOperatorName: 000-IT
5. Force updates to download to the SD Card – the "1GB File trick"
Windows Update always prefers to download updates to the local phone storage. It's typically faster than the SD card, and a whole lot safer. But if there's insufficient space, it can download the update files to the SD card.
On your PC, open up a Command Prompt as Administrator(!)
Create a 1GB file (copy and paste following line in Command Prompt): fsutil file createnew C:\1gb.tmp 1000000000
Copy the file to your Phone storage.
Join the Insiders Program if you haven't already, and select Slow Ring or Release Preview.
Check for phone updates.
Soon after the updates begin downloading (say 5% to be sure), you must delete the 1GB temp file. While this file forced Windows Update to download to the SD card, we still need all that space we cleared earlier for the updates to actually install!
Allow your phone to reboot when prompted.
Installing process will be much slower, because installation files are downloaded on SDcard, which is generally slower than phone storage. With my Transcend 8GB SD it lasted for about 2 hours. If install progress hangs for >1 hour at the "Migrating your data" screen, it's safe to reboot and you've got 10586.xxx version now.
6. Hard reset your device
After Hard Reset, your phone will be lumia 530 again, but don't worry, the next update will come anyway!!
7. Upgrade your Lumia 530 to 10586.318
Once you've successfully got 10586.xxx installed on your Lumia 530, you can upgrade to 10586.318.
Delete all unnecessary data and apps from Phone storage
The old 1GB file trick again. Copy that 1GB file back to your phone storage.
In the Settings App, search for updates. They should again begin downloading to your SD card.
As before, delete the 1GB file after the updates begin downloading.
address of photo:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Hi,
I need your help. Please, could you guide me in the process?
Ok. My Nokia Lumia 530 is a Dual SIM version and I live in Nicaragua. So, I will need to change some info before, in order to upgrade to W10. The RM to be used should be RM-1090 (Lumia 535 Dual SIM), but the second number (RM-1090_xxxx) how selected it? The Phone Mobile Operator Name should be: 000-NI?
Thanks in advance.
cmolinap said:
Hi,
I need your help. Please, could you guide me in the process?
Ok. My Nokia Lumia 530 is a Dual SIM version and I live in Nicaragua. So, I will need to change some info before, in order to upgrade to W10. The RM to be used should be RM-1090 (Lumia 535 Dual SIM), but the second number (RM-1090_xxxx) how selected it? The Phone Mobile Operator Name should be: 000-NI?
Thanks in advance.
Click to expand...
Click to collapse
hi
I couldn't find Nicaraguan carrier in lumia firmware software site http://www.lumiafirmware.com/ (that's where you search for identifiers). I found Italian identifiers (RM-1090_1046). Don't be confused about that. My original carrier is 000-RS (Serbia) and the phone is sim locked, but it worked with 000-IT (Italian). Anyway, your identifiers will return to original after the update and hard reset. As I could figure so far, the point is to trick the server to send you an update for existing phone. Regarding hardware, there are no differences between Lumias (e.g 535) all over the world.. I hope I helped you
dr_ausgemachte said:
Hi, cmolinap.
You dont have to pay anything. See tutorial (step 2) and you will unlock your phone for 2 developer applications. That's all you need!
Click to expand...
Click to collapse
dr_ausgemachte said:
UPDATE: LINKS ADDED
2. Developer Unlock your Lumia 530
If you haven't already, you'll need to register as a developer.
Click to expand...
Click to collapse
Registering as a developer comes with a fee of about $19
Just register. Its free .
PetterW said:
Registering as a developer comes with a fee of about $19
Click to expand...
Click to collapse
You don't need to pay to register. Install the SDK and open the 'developer registration' program. Sign in with any microsoft account and it'll work.
---------- Post added at 09:59 AM ---------- Previous post was at 09:51 AM ----------
Thanks for the guide, I've successfully updated to the 10586.318 build too.
Something to note is Developer Registration won't recognize your phone unless the phone is connected to the internet, and the date is correct. So if you changed the date to 100+ years, you might have to change it back to register.
Also, is it possible to get Fast ring working on this? It reboots when I pick fast ring and doesn't find any updates.
This thread is a plagiarism, it's a direct copy from this site:
https://www.realmtech.net/2016-03/upgrade-lumia-530-to-windows-10
Thread closed.
Hello,
i know that Redstone won´t work on that device, but i have been told that some previouse versions of Windows 10 mobile worked on it. Can you please give me some advice on how i can get a compatible version ?
Windows Insider App is already installed and i joined the fast ring. However, no updates are shown if i try to update in settings.....
Please help!
Regards,
impact 79
impact79 said:
Hello,
i know that Redstone won´t work on that device, but i have been told that some previouse versions of Windows 10 mobile worked on it. Can you please give me some advice on how i can get a compatible version ?
Windows Insider App is already installed and i joined the fast ring. However, no updates are shown if i try to update in settings.....
Please help!
Regards,
impact 79
Click to expand...
Click to collapse
At this time there's no way longer presents for your phone .
you have to wait for Boot Loader unlock . by the latest news you should heard about it (Microsoft accidently published their secure boot golden key) it must no longer takes to the hack release then you can use upgrade advisor and registry hack to upgrade to TH2 (10586 build of windows 10)
The link contains cabs download link for updating from latest wp8.1 to windows 10 mobile 10586.107. For Lumia 630 (RM-978) .
Using iutool to push cab files to the phone .Then check update for 10586 in settings.
Waitting for RS on L630 too...
fishersfish said:
The link contains cabs download link for updating from latest wp8.1 to windows 10 mobile 10586.107. For Lumia 630 (RM-978) .
Using iutool to push cab files to the phone .Then check update for 10586 in settings.
Waitting for RS on L630 too...
Click to expand...
Click to collapse
Is there a link for .cab files of RM-976?
BlueTR said:
Is there a link for .cab files of RM-976?
Click to expand...
Click to collapse
Sorry, I don't have one. I only captured the update links for myself before.
fishersfish said:
Sorry, I don't have one. I only captured the update links for myself before.
Click to expand...
Click to collapse
Will it brick my device if i try the RM-978 files on my RM-976 ?
impact79 said:
Will it brick my device if i try the RM-978 files on my RM-976 ?
Click to expand...
Click to collapse
I am just a guy who like flashing roms. I am not sure, it may not. ( Mine is a Dual-SIM module ,yours is of single SIM )
Just tried to flash those files on my RM-976. Unfortunately the update stops with ERROR 0x800b0100.
Seems that the windows security .dll files are not properly registered.
Do i have to unlock the phone or something else before trying to flash ?
impact79 said:
Just tried to flash those files on my RM-976. Unfortunately the update stops with ERROR 0x800b0100.
Seems that the windows security .dll files are not properly registered.
Click to expand...
Click to collapse
iutool doesn't need anything else to be done before pulling update files to the phone
Iutool Error Codes
https://msdn.microsoft.com/en-us/library/windows/hardware/mt131833(v=vs.85).aspx
"TRUST_E_NOSIGNATURE" means what? Maybe someone knows it.
I am getting 0x801882c1 error code while installing updates any idea about this? Error code specifies 0x801882C1 E_CABAPI_NOT_CABINET BTS_E_PER_APP_REQUEST_LIMIT_REACHED not really sure what that means. Downloaded all files twice and tried.
---------- Post added at 09:25 PM ---------- Previous post was at 09:04 PM ----------
KillerTheLord said:
I am getting 0x801882c1 error code while installing updates any idea about this? Error code specifies 0x801882C1 E_CABAPI_NOT_CABINET BTS_E_PER_APP_REQUEST_LIMIT_REACHED not really sure what that means. Downloaded all files twice and tried.
Click to expand...
Click to collapse
Solved this by deleting extra Desktop.ini file. How getting same error as above 0x800b0100.
Readstone can be run on Lumia 630 (512MB RAM) ! The update packages( cab files) can be downloaded from catalog.update.microsoft.com ( search your phone carrier name, like mine: 000-HK ), queue by time ,add 14343 to bucket and download .( other items for 10586 and erlier version; there SHOULD HAVE the links for upgrading from wp8.1 to 10586.107 ). If you can not click to download , view the poped-up webpage's source then copy and sort the download links by yourself.
You only need to download the files similar to the files you grabbed when updating 10586.107 to 10586.545. OR similar to the files in my attachment. It seems that difference to OS language packages can be ignored.
*.cbs_*.cab files are for FULL update, maybe they can be used on 10586.545 ; *.cbsu_*.cab files must can be used on 10586.545. They CANNOT be used at the same time, I update failed once due to this.
Replace IME and Speech data packages with yours.
Use iutool.exe to push cab files to your phone as usual.
If you update failed and your downloaded files are not broken, try to replace thoes files which their name start with or like:
microsoft.devicelayout_qc8x26_16k.mainos.cbs_
microsoft.soc_qc8x26_16k.mainos.cbs_
for other defination, replace this file: microsoft.prerelease_protected.mainos_res_480x800.cbs_*.cab .I am not sure if it can be used on Lumia 630.
Here is my screenshot: SO.....SO exciting!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@fishersfish:
sounds great, thanks for sharing!
However, i don´t understand completely yet. I have Win Phone 8.1 Update (8.10.14234.375) on my Lumia 630 (Carrier 000-DE).
Which files do i have to download ?
fishersfish said:
Readstone can be run on Lumia 630 (512MB RAM) ! The update packages( cab files) can be downloaded from catalog.update.microsoft.com ( search your phone carrier name, like mine: 000-HK ), queue by time ,add 14343 to bucket and download .( other items for 10586 and erlier version; there SHOULD HAVE the links for upgrading from wp8.1 to 10586.107 ). If you can not click to download , view the poped-up webpage's source then copy and sort the download links by yourself.
You only need to download the files similar to the files you grabbed when updating 10586.107 to 10586.545. OR similar to the files in my attachment. It seems that difference to OS language packages can be ignored.
*.cbs_*.cab files are for FULL update, maybe they can be used on 10586.545 ; *.cbsu_*.cab files must can be used on 10586.545. They CANNOT be used at the same time, I update failed once due to this.
Replace IME and Speech data packages with yours.
Use iutool.exe to push cab files to your phone as usual.
If you update failed and your downloaded files are not broken, try to replace thoes files which their name start with or like:
microsoft.devicelayout_qc8x26_16k.mainos.cbs_
microsoft.soc_qc8x26_16k.mainos.cbs_
for other defination, replace this file: microsoft.prerelease_protected.mainos_res_480x800.cbs_*.cab .I am not sure if it can be used on Lumia 630.
Here is my screenshot: SO.....SO exciting!!!
View attachment 3844880
Click to expand...
Click to collapse
impact79 said:
@fishersfish:
sounds great, thanks for sharing!
However, i don´t understand completely yet. I have Win Phone 8.1 Update (8.10.14234.375) on my Lumia 630 (Carrier 000-DE).
Which files do i have to download ?
Click to expand...
Click to collapse
Sorry, I didn't find either(Maybe I am just too excited ). But there must be a way! A guy from my country ( China ) just capture a lot of update cabs ( from wp8.1 to w10m ) this month. But not include your phone. He must used an other way.
Here is the guy:
http://bbs.wfun.com/home.php?mod=space&uid=1183465
http://weibo.com/u/1144511064
fishersfish said:
Sorry, I didn't find either(Maybe I am just too excited ). But there must be a way! A guy from my country ( China ) just capture a lot of update cabs ( from wp8.1 to w10m ) this month. But not include your phone. He must used an other way.
Here is the guy:
http://bbs.wfun.com/home.php?mod=space&uid=1183465
http://weibo.com/u/1144511064
Click to expand...
Click to collapse
Hi. Do you still have the Build 10586 for Lumia 630 dual sim 512 ram ?please upload this for me so I can flash it on my phone using WP Internal.please I really need it.
ngame said:
At this time there's no way longer presents for your phone .
you have to wait for Boot Loader unlock . by the latest news you should heard about it (Microsoft accidently published their secure boot golden key) it must no longer takes to the hack release then you can use upgrade advisor and registry hack to upgrade to TH2 (10586 build of windows 10)
Click to expand...
Click to collapse
I have downloaded the cab files and but iutool give me error no update files found
mirasal2 said:
I have downloaded the cab files and but iutool give me error no update files found
Click to expand...
Click to collapse
Seems it's command issue .
iutool -v -p C:\Update\*
this is the exact command for when you put update files in c:\Update folder , Do not forget \* it means install anything presents in this path .
ngame said:
Seems it's command issue .
iutool -v -p C:\Update\*
this is the exact command for when you put update files in c:\Update folder , Do not forget \* it means install anything presents in this path .
Click to expand...
Click to collapse
I'm sorry to tell you it didn't work.
Do I have to extract cab files?
Which version from iutool should use,mine is seems like 2014 version
mirasal2 said:
I'm sorry to tell you it didn't work.
Do I have to extract cab files?
Which version from iutool should use,mine is seems like 2014 version
Click to expand...
Click to collapse
No difference witch version are you using .
and surely you don't have to extract cabs . It the thing that will phone do on prepairing for installation
ngame said:
No difference witch version are you using .
and surely you don't have to extract cabs . It the thing that will phone do on prepairing for installation
Click to expand...
Click to collapse
Could you tell me the steps clearly,please?