Related
Hi guys, I've opened this thread so we can talk about the camera developement for CM9.
Here is the link including files and a how-to.
Here is the second link if you want even clearler instructions (Thanks to texten)
andy did u try it?( camera work)
Sent from my GT-I8150 using xda premium
Nothing, isn't working for me...
EDIT: I've an alpha 3, flashed the zip, and checked the permissions... Waiting for Arco...
I think we are missing with something..hopefully our Mentor. arco68 have the time to pass thru ere..
Can somebody poke alisd too...NVM I think I just did
http://forum.xda-developers.com/showthread.php?p=26384027
Sent from my GT-I8150 using Tapatalk 2
We can wait xD
iSadic said:
Nothing, isn't working for me...
Click to expand...
Click to collapse
+1
I tried very quickly 'cuz I don't have much time, but oisis' update zip+alpha2 didn't work.
this link is better:
http://forum.xda-developers.com/showpost.php?p=26511647&postcount=428
have fun!
texten said:
this link is better:
http://forum.xda-developers.com/showpost.php?p=26511647&postcount=428
have fun!
Click to expand...
Click to collapse
tried the instructions, but not working...
mike_kenji said:
tried the instructions, but not working...
Click to expand...
Click to collapse
maybe you will need to replace the "firmware"folder in that zip with firmware folder of gingerbread for you device
also the same procedure for the "media_profile.xml" in etc...
this could work:
just take that zip in my post, replace firmware folder and the media_profile.xml with the ones of your latest gingerbread...
and follow the installation instructions in my post
texten said:
this link is better:
http://forum.xda-developers.com/showpost.php?p=26511647&postcount=428
have fun!
Click to expand...
Click to collapse
texten said:
maybe you will need to replace the "firmware"folder in that zip with firmware folder of gingerbread for you device
Click to expand...
Click to collapse
where can i find those files? is the camera working for you?
mike_kenji said:
where can i find those files? is the camera working for you?
Click to expand...
Click to collapse
look here http://forum.xda-developers.com/showpost.php?p=26511647&postcount=428
you can see whats working and whats not working...
you can use the camera_experimental-0.1.zip
but you need to replace the firmware folder and the media_profile.xml in that zip with the ones of the latest gingerbread for your device
and do not forget to follow the installation instructions
for your further development on camera, you can also use these "instructions for camera testers"
(maybe you will add these to post#1 of this topic here)
--------------------------
here are instructions for camera testers:
Few important things:
1. make notes, because we will need it to restore steps.
2. make a logcat:
Code:
adb logcat -d > logcat.txt
if you want, edit logs like that (less logs - easier to read, logs only related with camera):
Linux shell:
Code:
cat ./logcat.txt | grep camera > logcat.new.txt
Windows cmd:
Code:
type logcat.txt | findstr camera > nwelogcat.txt
3. If you will find in log that HAL cannot connect with camera do not post logs, because they are useless
4. Do not zip or rar logs = easier to read on phone
----------------------------------
Additional Links:
You can try files from these phones.
Phones with MSM8255:
- CDMA XPeria Play
- LG Revolution
- HTC Desire S
- Sony xperia mini,mini pro, neo etc - camera works
- My touch 4g - camera works
- Xperia play - camera works
- Htc desire s - camera works
- Huawei honor - official ICS
- Htc one V - no front camera but official ICS
- http://forum.xda-developers.com/showthread.php?t=1639634
Thanks to: Spider550 for links, he cannot post here yet.
----------------------------------------------------------------------
if you make a logcat, do not forget to post which files you used.
folders for all files:
do not forget to set permissions for changed files/folders like all other files/folders there... and reboot after all changes you made!
*.so files to /system/lib
media_profile.xml to /system/etc
camera.apk to /system/app
firmware files to /system/firmware (maybe you have to create a folder)
---------
now you can start with testing.
for logcat = shutdown device - boot - start camtests - after that make a logcat directly.
texten said:
look here http://forum.xda-developers.com/showpost.php?p=26511647&postcount=428
you can see whats working and whats not working...
you can use the camera_experimental-0.1.zip
but you need to replace the firmware folder and the media_profile.xml in that zip with the ones of the latest gingerbread for your device
Click to expand...
Click to collapse
i'll try this in a while... thanks a lot... sorry for being a noob...
mike_kenji said:
i'll try this in a while... thanks a lot... sorry for being a noob...
Click to expand...
Click to collapse
no problem, maybe one other user of your device will give it a try
texten said:
no problem, maybe one other user of your device will give it a try
Click to expand...
Click to collapse
uhm... one last question, where do i put the firmware files? hehehe
*EDIT
nevermind, found it... thanks again!
mike_kenji said:
uhm... one last question, where do i put the firmware files? hehehe
Click to expand...
Click to collapse
open the zip file, delete the folder "firmware" and push your firmware folder from the latest gingerbread of your device on that place...
the same do with media_profile.xml
texten said:
open the zip file, delete the folder "firmware" and push your firmware folder from the latest gingerbread of your device on that place...
the same do with media_profile.xml
Click to expand...
Click to collapse
thanks.... wish me luck
mike_kenji said:
thanks.... wish me luck
Click to expand...
Click to collapse
good luck.
hahaha, i'm stuck on a bootloop.... try again...
Features：
mitation IOS system ROM.
Streamline a lot of useless programs and Google Services Framework.
Imitation IOS beautify the status bar notification page, the lock screen.
Clock, Matters Reminders, SMS, Contacts, Dial Pad, Setting interface imitation IOS depth beautification.
Support gesture to close background applications.
Landscaping, custom desktop icons hidden.
Support 5 × 4 arrangement of desktop icons.
Screenshots：
View attachment 1785684 View attachment 1785685
View attachment 1785686 View attachment 1785687
View attachment 1785693 View attachment 1785694
View attachment 1785695 View attachment 1785696
View attachment 1785698 View attachment 1785699
View attachment 1785700 View attachment 1785701
View attachment 1785703 View attachment 1785704
View attachment 1785705 View attachment 1785706
Brush steps:
Brush steps:
1. Install the driver.
2.Unlock the phone.
3.ROOT phone.
4 brush into the recovery.
5 Download the ROM package into the SD card.
6. Enter Recovery.
7.wipe data / factory reset.
8.wipe cache partition.
--- Strongly recommend dual wipe painted into not wipe may cause unknown problems causing unnecessary trouble.
9.install zip from sdcard --------- choose zip from sdcard, and then just put rom file, confirm that automatic brush into.
10.reboot system now.
Download: http://dl.vmall.com/c0u8avt9dx
Not my style ... but thx for your work ...
Is this rom multilanguage ... can`t read this
And base is 4.0.4 ?? Why so an old source??
Yes...why this is based on 4.0.4??
Verstuurd van mijn Galaxy Nexus met Tapatalk
There wont be any problems flashing back to ICS will there? And then flashing back to JB as well?
Sent from my Galaxy Nexus using xda app-developers app
Thank you for this rom. It is an alternative. If someone doesn't like this one or some, nobody wants your comments. There are plenty of roms here, do better comment the one you like.
If you don't have something good to say, say nothing at all.
I won't use this rom myself, but I never understand criticism without a positive point.
4.0 really?
Sent from my Galaxy Nexus using xda app-developers app
Is English available on this ROM? I really like this!
Sent from my Galaxy Nexus using xda premium
Did 4.0.4 4.2.2 while, but why?
Great bro ! It looks awesome :good: i will defintely try. but why such an old base?
this proves what we can as android user, im gonna install this for the sake of showing off!
maybe it's too dificult to use newer base (4.2.x and up) and maybe the dev use older base 4.0.4 because it's more easy i think
which gapps do i use? i keep getting fc. I installed three different packages for ics and the play store won't open.
Ok, let's try this again. Please be respectful in your posts.
Thread Cleaned
Woody said:
Ok, let's try this again. Please be respectful in your posts.
Thread Cleaned
Click to expand...
Click to collapse
thank you
Sent from my Galaxy Nexus using xda premium
Is the ROM multilingual or just chinese?
Anyone got experiance?
Looks awesome
the chinese have a link to download image verification code: S: S: S
spartanier7 said:
Is the ROM multilingual or just chinese?
Anyone got experiance?
Looks awesome
Click to expand...
Click to collapse
Its in English when you flash it. Let me know if you get a gapps package to work
Sent from my Galaxy Nexus using xda premium
Ok i would actually download it... but... no way to enter the captcha!!
Probably you could upload on an englisch hoster? No one here will get this workind dude
spartanier7 said:
Ok i would actually download it... but... no way to enter the captcha!!
Probably you could upload on an englisch hoster? No one here will get this workind dude
Click to expand...
Click to collapse
I was able to download it without having to do that. From the link where it says the name of the ROM, click that and your download should start. I did it from the stock android browser.
Sent from my Galaxy Nexus using xda premium
what happened to this..?
I have a method to install the aosp browser without any root privileges at all and no modifications of the system partition. Just involves installing 2 or 3 apks (depending if you want bookmark syncing). This should work on any of the other nexus devices that came without stock browser. This is also an improvement over the root method as it does not break OTA updates even on rooted devices.
Please don't repost this yet. I want to add in the other languages to browser.apk for the "find on page" button in the menu. I fixed English. The stock nexus roms don't have the string in framework-res for this one button.
Download zip (this is not a cwm package/just extract it or open the files from inside)
http://www.mediafire.com/download/sp3778itcps5iq1/aospbrowser-noroot-blackhand1001.zip
Steps:
1. Use es file manager to browse to system/app and install browserproviderproxy (it will say app not installed, don't worry it worked)
2. Reboot (it will not work without rebooting first)
3. Install Browser4.3_blackhand1001.apk
4. Install ChromeBookmarksSyncAdapter_blackhand1001.apk (this will give you bookmark syncing)
Video Tutorial (thanks XDA)
Reserved for future updates...
There is no document in this link...
Sent from my One using xda premium
heartsaver1859 said:
There is no document in this link...
Sent from my One using xda premium
Click to expand...
Click to collapse
I fixed the link sorry about that.
Modified the procedure to work with this device properly. Turns out the signatures on the one file differ between devices.
blackhand1001 said:
I fixed the link sorry about that.
Click to expand...
Click to collapse
Thanks for this. Works very well on my devices.
Updated it so the autocomplete dropdown no longer has the blue line glitch. The style definition for the dropdown is missing on the stock nexus 7 rom so I copied it and put it in the browser itself and pointed to it there.
Added User agent selection in advanced preferences.
Full screen option in labs.
when u say install browserproviderproxy in system/app, do you mean install the one found in the nexus7 directory, or the one in your zip file?
AndyGnex said:
when u say install browserproviderproxy in system/app, do you mean install the one found in the nexus7 directory, or the one in your zip file?
Click to expand...
Click to collapse
The one on the nexus 7 directory. I updated the download link. It now has user agent selection and a fullscreen mode in the labs menu. The link was pointing to an older version that still had the browserproxyprovider file in the zip. You need to use the one on the device already.
blackhand1001 said:
The one on the nexus 7 directory. I updated the download link. It now has user agent selection and a fullscreen mode in the labs menu. The link was pointing to an older version that still had the browserproxyprovider file in the zip. You need to use the one on the device already.
Click to expand...
Click to collapse
Works like a charm
Perfect on new Nexus 7
THANK YOU. This worked PERFECTLY on my new nexus 7. I love the tablet but for me Chrome is nowhere near as good and useful as this stock browser, so thanks a lot.
megafrij0l said:
THANK YOU. This worked PERFECTLY on my new nexus 7. I love the tablet but for me Chrome is nowhere near as good and useful as this stock browser, so thanks a lot.
Click to expand...
Click to collapse
Doesn't work for me.
1. Run install browserproviderproxy.apk in system/app directory which fails - check
2. Reboot - checl
3. Install signedBrowser-blackhand1001.apk - FAILS (X App not installed)
andTab said:
Doesn't work for me.
1. Run install browserproviderproxy.apk in system/app directory which fails - check
2. Reboot - checl
3. Install signedBrowser-blackhand1001.apk - FAILS (X App not installed)
Click to expand...
Click to collapse
Since I was rooted anyhow, I ended up using the root AOSP Browser installation app from the market.
We will see if the bookmark sync works with that (it's supposed to)
Working on my HTC One - ARHD 4.1 Google Edition with this method !!!!!
For Android 4.4
Supporting root device
not work new incognito tab
Derived from the last sdk
http://www.mediafire.com/download/6uaeiyu2b92h88u/Browser.zip
Just updated to 4.4 and browser didn't work so I uninstalled..... Wot do I do now?
All stock nexus 4
Sent from my Nexus 4 using xda app-developers app
chaosfoevr said:
Just updated to 4.4 and browser didn't work so I uninstalled..... Wot do I do now?
All stock nexus 4
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
delete BrowserProviderProxy.apk
system/app/ BrowserProviderProxy.apk
Tried to delete that file and it says cannot delete it... Not rooted running 4.4 on nexus 2012....
Introduction:
After my successful port of the Z2 lockscreen with particle effects, I have now ported over the Z2 framework-res.apk and merged it with the existing CM11 .apk. Flashing this zip will change the radio buttons, progress bars, animations, buttons and a make it look a lot more like the Sony Xperia Z2.
You need @percy_g2 's CM11 in order to flash this. Don't try flashing on any other ROM as I will not support it. Any issues should be reported with a relevant logcat.
Installation Instructions:
1. Place "framework-edited.zip" into your phone's internal memory.
2. Push framework-res.apk via ADB.
3. Reboot
4. Hit thanks :fingers-crossed:
Screenshots in 2nd post
Tested on:
Moto E - XT1022 - CM11 (Nightly)
Known Issues:
Absolutely none
Contributors:
@cwankhede for the port
@ashishdubey, @naheel azawy for their guides on porting.
Here are the screenshots:
Do leave me replies whether it worked for you or not. Also, I'm using a CM11 Xperia theme. I can link you to it if you ask
U are too good.
Look at repa xperias build if u are interested.
Sent from my XT1022 using xda premium
doesn't work on xt1021,i'm using CyanogenMod 11.0 Nightlies and SNAPSHOTS and i installed your lockscreen
comezon said:
doesn't work on xt1021,i'm using CyanogenMod 11.0 Nightlies and SNAPSHOTS and i installed your lockscreen
Click to expand...
Click to collapse
What error are you receiving? Could you give more detail?
Try manually pushing framework-res.apk to system/app through ADB. Don't use root explorer while phone is switched on, it won't work. Use ADB only?
If it still didn't work, then tell me what is happening and I'll look into it.
P.S. Lockscreen works on XT1021?
i used recovery to flash it,after rebooting the framework didn't change any.( the radio buttons, progress bars,etc.)
comezon said:
i used recovery to flash it,after rebooting the framework didn't change any.( the radio buttons, progress bars,etc.)
Click to expand...
Click to collapse
The framework files will be different for your single SIM device. Could you attach your original framework-res.walk from /system/framework? I'll port it over for the single SIM variant
could be that and thank you for your work.
comezon said:
could be that and thank you for your work.
Click to expand...
Click to collapse
My pleasure..
Try manual pushing via ADB. If still not working, submit the framework-res.apk from /system/framework.
Not working.
Flashed it.
No change. Same as cm.
Sent from my XT1022 using xda premium
nisu4717 said:
Not working.
Flashed it.
No change. Same as cm.
Sent from my XT1022 using xda premium
Click to expand...
Click to collapse
Push framework-res.apk via ADB. I did that originally while development.
Gonna recreate the flashable zip file and retest it. If you don't know how to use the push command, google it/wait for me to reupload the flashable zip.
cwankhede said:
Push framework-res.apk via ADB. I did that originally while development.
Gonna recreate the flashable zip file and retest it. If you don't know how to use the push command, google it/wait for me to reupload the flashable zip.
Click to expand...
Click to collapse
I will wait
Sent from my XT1022 using xda premium
cwankhede said:
Introduction:
After my successful port of the Z2 lockscreen with particle effects, I have now ported over the Z2 framework-res.apk and merged it with the existing CM11 .apk. Flashing this zip will change the radio buttons, progress bars, animations, buttons and a make it look a lot more like the Sony Xperia Z2.
You need @percy_g2 's CM11 in order to flash this. Don't try flashing on any other ROM as I will not support it. Any issues should be reported with a relevant logcat.
Installation Instructions:
1. Place "framework-edited.zip" into your phone's internal memory.
2. Push framework-res.apk via ADB.
3. Reboot
4. Hit thanks :fingers-crossed:
Screenshots in 2nd post
Tested on:
Moto E - XT1022 - CM11 (Nightly)
Known Issues:
Absolutely none
Contributors:
@cwankhede for the port
@ashishdubey, @naheel azawy for their guides on porting.
Click to expand...
Click to collapse
Which build ?
It depends on cm11 build number.Otherweise it doesnt work on another cm11 build
gamzekal said:
Which build ?
It depends on cm11 build number.Otherweise it doesnt work on another cm11 build
Click to expand...
Click to collapse
I had used one of the old builds. It was a long time ago and nobody was interested much so I didn't continue development
cwankhede said:
I had used one of the old builds. It was a long time ago and nobody was interested much so I didn't continue development
Click to expand...
Click to collapse
Look at your p.m
I have good news for you
Hi
I have new Nubia ZTE Z5S Mini NX403A, there was hard to find information about upgrade and root so here it is, all in one thread!
When you buy Nubia ZTE Z5S Mini its came to you with Android 4.2.2.
When you plug in phone to computer by USB cable you can install USB drivers right from device. Make a backup of this drivers because after upgrade you will be not able to access it again.
There is a copy for you: USB drivers for ZTE Nubia Z5S Mini -> download
When the drivers will be installed turn on USB Debugging mode. (Settings->About Device, click a few times in Build Version to turn on Developers access. Now go to Settings->Developer options.)
First step is to root your device.
Root ZTE Nubia Z5S Mini – download
Download it and extract. Run íżbatROMdiyí┐╣Ąż▀¤ń.exe file.
Wait till your phone will be detected then choose option "05....." from the menu in CMD window.
If the installation will be completed then you will find two new icons Link2SD and SuperSU on your phone screen.
To install TWRP Custom Recovery you need to install Flashify app.
Download, extract and copy TWRP 2.8.6.1 Recovery into SD Card and also copy to SD Card file ui.zip with theme for TWRP with English language unless you know Chinese (more themes for TWRP here on XDA)
Install and run Flashify app. In app menu click on Choose File and select TWRP2.8.6.1-Recovery.img file from SD Card.
Confirm.
When your phone will reboot go to phone memory and inside TWRP catalog create new one called "theme" and put there ui.zip file.
Download an copy into SD Card these two files:
–Android 5.0.2 CM12 temasek-v9.4-nx403a.zip
–gapps-lp-20141212-signed.zip
NEW UPDATED ROM: http://forum.xda-developers.com/showpost.php?p=62249397&postcount=4
Run phone in Recovery Mode. (Hold in the same time: Power button and Volume Up.)
From TWRP menu choose Wipe (Wipe your phone to factory settings before you will install new Rom)
After wipe choose from TWRP menu option Install.
Choose from SD Card temasek-v9.4-nx403a.zip file and confirm installation of new ROM.
Reboot your phone and enjoy your new system
If you want Google Play Store and other Google apps install gapps-lp-20141212-signed.zip file the sam way you installed ROM from TWRP Recovery.
You need root your phone again. Download and install SuperSU from Google Play
Go to Settings->Developer Options->Root Access and choose Apliactions and ADB
Run SuperSU, accept root instalation and choose CWM/TWRP option.
If you get "soft brick" of your phone you can recover it with this instruction.
Rom do not have any bugs or errors. Works fine.
Screenshots (my language is Polish but all other languages are supported I also got some apps already installed):
Screenshot please..
Dear hoeczek.. Screenshot please, i want a try this rom.. thanks before..
Riskywen said:
Dear hoeczek.. Screenshot please, i want a try this rom.. thanks before..
Click to expand...
Click to collapse
done, screenshots added
Update:
Much better, faster and more optimized rom - 2015-07-31: https://www.oboom.com/JQD60V6O/cm-12-20150731-UNOFFICIAL-nx403a.zip
Still based od Android 5.0.2 CM12 but more stable!
hello
i need sample camera picture
plz send to my email sample
tnx a lot
[email protected]
SenatorPC said:
hello
i need sample camera picture
plz send to my email sample
tnx a lot
[email protected]
Click to expand...
Click to collapse
check attachment
very tnx
plz send me original size of picture and indoor outdoor picture
tnx so much ♥ ♥ ♥
---------- Post added at 09:46 PM ---------- Previous post was at 09:45 PM ----------
hoeczek said:
check attachment
Click to expand...
Click to collapse
very tnx
plz send me original size of picture and indoor outdoor picture
tnx so much ♥ ♥ ♥
no new update available?
this ROM run in nx405h o nx406e??????
Missing files
all links are dead. can you update? or reupload? thanks!
expired links
hi .. links are not working...can u pleeeease upload the ROM and recovery file to another upload center like mediafire???
i really need it
tanx
h00man13 said:
hi .. links are not working...can u pleeeease upload the ROM and recovery file to another upload center like mediafire???
i really need it
tanx
Click to expand...
Click to collapse
Hi,
This is all my backup for ZTE Nubia Z5S Mini
https://mega.nz/#F!Od8VhayL!fjngoEKZda-8MJE0sVpdNg
I hope this will help.
good luck!
PS: give it 40 minutes more some files are still uploading
Spam
hoeczek said:
Update:
Much better, faster and more optimized rom - 2015-07-31: https://www.oboom.com/JQD60V6O/cm-12-20150731-UNOFFICIAL-nx403a.zip
Still based od Android 5.0.2 CM12 but more stable!
Click to expand...
Click to collapse
need to register to download
Link
hoeczek said:
Update:
Much better, faster and more optimized rom - 2015-07-31: https://www.oboom.com/JQD60V6O/cm-12-20150731-UNOFFICIAL-nx403a.zip
Still based od Android 5.0.2 CM12 but more stable!
Click to expand...
Click to collapse
hello there, can you provide me with other link than above? the link you've provided doesn't work anymore. i was hopping to install a flawless custom rom.
Mohammad3389 said:
hello there, can you provide me with other link than above? the link you've provided doesn't work anymore. i was hopping to install a flawless custom rom.
Click to expand...
Click to collapse
Here you go: https://mega.nz/#F!Od8VhayL!fjngoEKZda-8MJE0sVpdNg
ciripian said:
need to register to download
Click to expand...
Click to collapse
When I upload it here it was free, now file is deleted, so you don't need to register, because there is nothing at all to download there. At the top of page there is info: "File no longer exist" and under that there are some ads about create account for money. So before you say something is spam, read it carefully please.
Best Rom
hoeczek said:
Here you go: https://mega.nz/#F!Od8VhayL!fjngoEKZda-8MJE0sVpdNg
Click to expand...
Click to collapse
thank you so much. and may I know what is the best rom for this device? i've been flashing many roms but each rom has an issue, even the original rom has bug and when i play videos on youtube or facebook it's black and white and distorted. which rom is stable and has the least bugs?
Mohammad3389 said:
thank you so much. and may I know what is the best rom for this device? i've been flashing many roms but each rom has an issue, even the original rom has bug and when i play videos on youtube or facebook it's black and white and distorted. which rom is stable and has the least bugs?
Click to expand...
Click to collapse
You're welcome.
I am using this one now: http://www.needrom.com/download/nx503a-cyanogenemod-5-1-1-lollipop/
I didn't find any bugs and YouTube app works fine for me.
hoeczek said:
You're welcome.
I am using this one now: http://www.needrom.com/download/nx503a-cyanogenemod-5-1-1-lollipop/
I didn't find any bugs and YouTube app works fine for me.
Click to expand...
Click to collapse
I've seen it but it is for Nubia Z5s i think, because it's written nx503a. my device is nubia z5s mini which is nx403a.
Mohammad3389 said:
I've seen it but it is for Nubia Z5s i think, because it's written nx503a. my device is nubia z5s mini which is nx403a.
Click to expand...
Click to collapse
Yep you re right. It is hard to find working/new soft for this smartphone.