Introduction:
After my successful port of the Z2 lockscreen with particle effects, I have now ported over the Z2 framework-res.apk and merged it with the existing CM11 .apk. Flashing this zip will change the radio buttons, progress bars, animations, buttons and a make it look a lot more like the Sony Xperia Z2.
You need @percy_g2 's CM11 in order to flash this. Don't try flashing on any other ROM as I will not support it. Any issues should be reported with a relevant logcat.
Installation Instructions:
1. Place "framework-edited.zip" into your phone's internal memory.
2. Push framework-res.apk via ADB.
3. Reboot
4. Hit thanks :fingers-crossed:
Screenshots in 2nd post
Tested on:
Moto E - XT1022 - CM11 (Nightly)
Known Issues:
Absolutely none
Contributors:
@cwankhede for the port
@ashishdubey, @naheel azawy for their guides on porting.
Here are the screenshots:
Do leave me replies whether it worked for you or not. Also, I'm using a CM11 Xperia theme. I can link you to it if you ask
U are too good.
Look at repa xperias build if u are interested.
Sent from my XT1022 using xda premium
doesn't work on xt1021,i'm using CyanogenMod 11.0 Nightlies and SNAPSHOTS and i installed your lockscreen
comezon said:
doesn't work on xt1021,i'm using CyanogenMod 11.0 Nightlies and SNAPSHOTS and i installed your lockscreen
Click to expand...
Click to collapse
What error are you receiving? Could you give more detail?
Try manually pushing framework-res.apk to system/app through ADB. Don't use root explorer while phone is switched on, it won't work. Use ADB only?
If it still didn't work, then tell me what is happening and I'll look into it.
P.S. Lockscreen works on XT1021?
i used recovery to flash it,after rebooting the framework didn't change any.( the radio buttons, progress bars,etc.)
comezon said:
i used recovery to flash it,after rebooting the framework didn't change any.( the radio buttons, progress bars,etc.)
Click to expand...
Click to collapse
The framework files will be different for your single SIM device. Could you attach your original framework-res.walk from /system/framework? I'll port it over for the single SIM variant
could be that and thank you for your work.
comezon said:
could be that and thank you for your work.
Click to expand...
Click to collapse
My pleasure..
Try manual pushing via ADB. If still not working, submit the framework-res.apk from /system/framework.
Not working.
Flashed it.
No change. Same as cm.
Sent from my XT1022 using xda premium
nisu4717 said:
Not working.
Flashed it.
No change. Same as cm.
Sent from my XT1022 using xda premium
Click to expand...
Click to collapse
Push framework-res.apk via ADB. I did that originally while development.
Gonna recreate the flashable zip file and retest it. If you don't know how to use the push command, google it/wait for me to reupload the flashable zip.
cwankhede said:
Push framework-res.apk via ADB. I did that originally while development.
Gonna recreate the flashable zip file and retest it. If you don't know how to use the push command, google it/wait for me to reupload the flashable zip.
Click to expand...
Click to collapse
I will wait
Sent from my XT1022 using xda premium
cwankhede said:
Introduction:
After my successful port of the Z2 lockscreen with particle effects, I have now ported over the Z2 framework-res.apk and merged it with the existing CM11 .apk. Flashing this zip will change the radio buttons, progress bars, animations, buttons and a make it look a lot more like the Sony Xperia Z2.
You need @percy_g2 's CM11 in order to flash this. Don't try flashing on any other ROM as I will not support it. Any issues should be reported with a relevant logcat.
Installation Instructions:
1. Place "framework-edited.zip" into your phone's internal memory.
2. Push framework-res.apk via ADB.
3. Reboot
4. Hit thanks :fingers-crossed:
Screenshots in 2nd post
Tested on:
Moto E - XT1022 - CM11 (Nightly)
Known Issues:
Absolutely none
Contributors:
@cwankhede for the port
@ashishdubey, @naheel azawy for their guides on porting.
Click to expand...
Click to collapse
Which build ?
It depends on cm11 build number.Otherweise it doesnt work on another cm11 build
gamzekal said:
Which build ?
It depends on cm11 build number.Otherweise it doesnt work on another cm11 build
Click to expand...
Click to collapse
I had used one of the old builds. It was a long time ago and nobody was interested much so I didn't continue development
cwankhede said:
I had used one of the old builds. It was a long time ago and nobody was interested much so I didn't continue development
Click to expand...
Click to collapse
Look at your p.m
I have good news for you
Related
Based on: This thread.
-------------------------------------------------------------------------------------------------------------------------
Screenshots:
Video from original thread, so not on Xperia S but Galaxy Nexus.
-------------------------------------------------------------------------------------------------------------------------
Tested working on FXP145 and newer. Older should probably work too, but I'm not sure about that. (CM10 and Xperia S, of course)
Please report if it works and any bug you run in to! And you might want to backup the files modded by this mod (services.jar, framework-res.apk, framework2.jar, framework.jar and android.policy.jar which are all in the system/framework/ folder) in case you want to get back to the original lockscreen.
-------------------------------------------------------------------------------------------------------------------------
Download:
Here.
Warning! Somebody reported to me the mod isn't working properly on FXP149. Somebody else reported it working though, so I guess it should be fine. You probably want to backup your files for the sake of safety though.
Install instructions:
1. Save the zip to your phone's memory.
2. Reboot into recovery.
3. Go to "Install from zip" -> "Install from sdcard" and select the zip file.
4. Follow the onscreen instructions.
5 . Reboot device and enjoy!
-------------------------------------------------------------------------------------------------------------------------
Big thanks to:
evilisto for making the patch needed for this mod!
The FXP team(Bin4ry, Defer, Kali, Jerpelea) for making this beatiful rom!
Been waiting for this and it works great. Only thing is that when you unlock it the time doesn't dissappear straight away, but this is so minor I don't really care. Thanks a lot!
---------- Post added at 02:20 PM ---------- Previous post was at 01:49 PM ----------
Also swipe in any direction doesn't always show up
Sent from my Galaxy Nexus using xda app-developers app
Will this work with Paranoid Android 2.55 ? :x
Probably will work. Back up the files and try it if you want to know, you can always restore!
markk1995 said:
Probably will work. Back up the files and try it if you want to know, you can always restore!
Click to expand...
Click to collapse
I tried, and i'm stuck at bootanimation ^^' it does'nt work :./
martinko23 said:
I tried, and i'm stuck at bootanimation ^^' it does'nt work :./
Click to expand...
Click to collapse
The framework is different. Give him the PA 2.55 framework-res.apk (and maybe a few other files, I don't remember what is used) so he can apply over it.
I am just waiting for FXP to fix the problems on their kernel which was causing problems on dual boot to update my PA to the next version, so consider it, @OP, a request for the future.
markk1995 said:
Been waiting for this and it works great. Only thing is that when you unlock it the time doesn't dissappear straight away, but this is so minor I don't really care. Thanks a lot!
---------- Post added at 02:20 PM ---------- Previous post was at 01:49 PM ----------
Also swipe in any direction doesn't always show up
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Thanks a lot for trying it out!
Yes I know about that first one, but as you can see in the video, it's in the original mod too. So I don't think I can do anything about it. Will look into the source though.
That second thing looks interesting, because here it shows up every time, even though sometimes barely visible. Are you sure it really isn't there sometimes?
Felimenta97 said:
The framework is different. Give him the PA 2.55 framework-res.apk (and maybe a few other files, I don't remember what is used) so he can apply over it.
Click to expand...
Click to collapse
Sadly enough that won't work, because the patch (from the original mod) isn't done to the compiled (framework-res.apk, framework.jar etc...) files, but to the source code. Then I compile it and pick out the files needed, pack them up in a zip file, and deliver them to you .
Felimenta97 said:
@OP, a request for the future.
Click to expand...
Click to collapse
Yeah I was already thinking about that, but I don't know for sure if it will work. Since this patch is made for CM10, I think it might break some things specific to PA. I'll download the PA source and try it out when I have some spare time
TiesB said:
Thanks a lot for trying it out!
Yes I know about that first one, but as you can see in the video, it's in the original mod too. So I don't think I can do anything about it. Will look into the source though.
That second thing looks interesting, because here it shows up every time, even though sometimes barely visible. Are you sure it really isn't there sometimes?
Sadly enough that won't work, because the patch (from the original mod) isn't done to the compiled (framework-res.apk, framework.jar etc...) files, but to the source code. Then I compile it and pick out the files needed, pack them up in a zip file, and deliver them to you .
Yeah I was already thinking about that, but I don't know for sure if it will work. Since this patch is made for CM10, I think it might break some things specific to PA. I'll download the PA source and try it out when I have some spare time
Click to expand...
Click to collapse
It can break something at PA source, but it is based on CM10, so how knows.
"What really matters in this world, anyway?"
At second glance it is there but behind the black background so hardly visible for me
Can you make it for T989 running cm10?
Ynx ion advance.
markk1995 said:
At second glance it is there but behind the black background so hardly visible for me
Click to expand...
Click to collapse
Yeah that's kinda what I thought. I'll look into the code if I can maybe "layer it up" or something, but don't pin me down on that .
ghassir said:
Can you make it for T989 running cm10?
Ynx ion advance.
Click to expand...
Click to collapse
That should be possible for sure. That's the the T-Mo S2 right? Downloading the source code atm.
I'm sorry for the late response, I was at my grandparents' and didn't have a pc with internet over there...
Sent from my Xperia S using xda app-developers app
Doesn't boot with AOKP and the kernel from kali
googleye said:
Doesn't boot with AOKP and the kernel from kali
Click to expand...
Click to collapse
Because it's made for CM10 my friend but still thanks for trying because I now know I'll have to build a special one for PA and AOKP
Btw, a small status update: I've ran out of disk space on my wubi install so I'm waiting on my NAS to come, which should arrive somewhere next week. Then I can move all my media (movies, music etc...) to the NAS, and resize my wubi disk to a lot bigger one Then the sources I was downloading can continue
Perfect in fxp 147
TiesB said:
Because it's made for CM10 my friend but still thanks for trying because I now know I'll have to build a special one for PA and AOKP
Btw, a small status update: I've ran out of disk space on my wubi install so I'm waiting on my NAS to come, which should arrive somewhere next week. Then I can move all my media (movies, music etc...) to the NAS, and resize my wubi disk to a lot bigger one Then the sources I was downloading can continue
Click to expand...
Click to collapse
I thought it would still work, isn't AOKP based on CM or am I way out of line here? Anyways a version for AOKP would be appreciated :good:
googleye said:
I thought it would still work, isn't AOKP based on CM or am I way out of line here? Anyways a version for AOKP would be appreciated :good:
Click to expand...
Click to collapse
AOKP had its own source code.
"What really matters in this world, anyway?"
Are there more themes for lockscreen available?
does not xcream on then?
i love this loocscreen, someone test it in fxp 148?
patato800 said:
Are there more themes for lockscreen available?
Click to expand...
Click to collapse
Yes, the
guy who made this patch (evilisto), also made some other ones like the BB10 (I believe) LockScreen. If you want you can request one from his threads and I should be able to make it
fabidesca said:
does not xcream on then?
Click to expand...
Click to collapse
Nope, I'm sorry. Only works on CM10
Sent from my Xperia S using xda app-developers app
Here is MOD from ICS based ROM for ION. It swap extsd2internalsd.
I don't know whether this will work on other mods. It may or may not work. I have XZXperience2___v1 (original Thread http://forum.xda-developers.com/showthread.php?t=2157394 and it work fine.
Don't blame me if anything happen to your phone while trying on another ROM.
But it may Work on other ICS based ROM.
Requirement
1- LT28 h/i both supported
2-LOCK BOOTLOADER and/or BOOTLOADER UNLOCKED can enjoy this!
3- Rooted Phone Must.
BUGs / Known issues
1-Tell me "we will try to solve"
How to install:
-Download and copy ZIP file to your phone.
-Enter Recovery.
-Choose ZIP file and Flash it.
-Reboot and Enjoy swap extsd2internalsd.
There are Two Zip files:
For SWAP
- ION_SWAP_extsd2internalsd.zip
http://www.megafileupload.com/en/file/414104/ION-SWAP-extsd2internalsd-zip.html
For Restore Back to Original
- ION_SWAP_extsd2internalsd_Restore.zip
http://www.megafileupload.com/en/file/414105/ION-SWAP-extsd2internalsd-Restore-zip.html
Thanks Me.
WRONG SECTION:
Yeah this goes in the Xperia S, Acro S, Ion Themes and Apps :/
but i applaud you for you work
hold up rewind XD this is apparently the correct section 0.0
the mod...could u remove this foolish post o.0 (that i made) and the follow up by the kind dev?
424aca said:
WRONG SECTION:
Yeah this goes in the Themes and Apps section area :/
Click to expand...
Click to collapse
Admin , plz move it to Themes and Apps section area.
This Mod is fine where it is, there is no need for it to be moved.
someone, please upload the file on other download site please :angel:
MrGezz said:
someone, please upload the file on other download site please :angel:
Click to expand...
Click to collapse
Here you go Bro
ION_SWAP_extsd2internalsd
ION_SWAP_extsd2internalsd_Restore
Does this mod work in jellybean??If no then someone plz make this kinnda mod for jellybean also..
Sent from my LT28i using XDA Premium 4 mobile app
Nitesh Shrestha said:
Does this mod work in jellybean??If no then someone plz make this kinnda mod for jellybean also..
Click to expand...
Click to collapse
http://rghost.ru/49758158 - here is JB version.
Credit goes to valik2008-08 @ 4pda.ru (source).
anielkumar said:
Here is MOD from ICS based ROM for ION. It swap extsd2internalsd.
I don't know whether this will work on other mods. It may or may not work. I have XZXperience2___v1 (original Thread http://forum.xda-developers.com/showthread.php?t=2157394 and it work fine.
Don't blame me if anything happen to your phone while trying on another ROM.
But it may Work on other ICS based ROM.
Requirement
1- LT28 h/i both supported
2-LOCK BOOTLOADER and/or BOOTLOADER UNLOCKED can enjoy this!
3- Rooted Phone Must.
BUGs / Known issues
1-Tell me "we will try to solve"
How to install:
-Download and copy ZIP file to your phone.
-Enter Recovery.
-Choose ZIP file and Flash it.
-Reboot and Enjoy swap extsd2internalsd.
There are Two Zip files:
For SWAP
- ION_SWAP_extsd2internalsd.zip
http://www.megafileupload.com/en/file/414104/ION-SWAP-extsd2internalsd-zip.html
For Restore Back to Original
- ION_SWAP_extsd2internalsd_Restore.zip
http://www.megafileupload.com/en/file/414105/ION-SWAP-extsd2internalsd-Restore-zip.html
Thanks Me.
Click to expand...
Click to collapse
make internal2external JB :good:
g.man.7489 said:
make internal2external JB :good:
Click to expand...
Click to collapse
It is literally above your post.
nv0id said:
It is literally above your post.
Click to expand...
Click to collapse
but, internal2sdcard ? or should i use link2sd?
can anyone please share some recent apps mod for nexus 4?
I'm all for that my friend I hope some dev will respond to the plea
Sent from my Nexus 4 using xda premium
anyone here can give some suggestions
I would like a clear all button
Sent from my Nexus 4 using xda premium
I'm on xylon ROM and that has a clear button
Sent from my Nexus 4 using xda premium
CM has it too
You mean like these:
http://forum.xda-developers.com/showthread.php?t=1552409
http://forum.xda-developers.com/showthread.php?t=1563481
http://forum.xda-developers.com/showthread.php?t=1589963
Ihtisham48 said:
You mean like these:
http://forum.xda-developers.com/showthread.php?t=1552409
http://forum.xda-developers.com/showthread.php?t=1563481
http://forum.xda-developers.com/showthread.php?t=1589963
Click to expand...
Click to collapse
These are great! :highfive:
Quite some time since I last tried my hands on apk modding...will try now and post up :silly:
I found those for cm10.1 but there want a lot of editing and im pretty boring to do them..they are easy thought exept if your trying to edit a lot of custom rom like slim like me that having alot of extra code!!it will be easier on pure cm10.1
I am gonna try it on the latest Paranoid Android Alpha..
Setting up my dev tools again
Would be nice to have them as flashable zip
N4 AOSPR
cust0mworx said:
Would be nice to have them as flashable zip
N4 AOSPR
Click to expand...
Click to collapse
hey buddy nice to see u here
akshaybz said:
I am gonna try it on the latest Paranoid Android Alpha..
Setting up my dev tools again
Click to expand...
Click to collapse
Can you make the sense 4 version for PA 26th April build? I'm sure not all PA users are using the alpha build Please?
noowb00 said:
Can you make the sense 4 version for PA 26th April build? I'm sure not all PA users are using the alpha build Please?
Click to expand...
Click to collapse
I don't think there are major changes in framework since then..it should work
It will take me some time coz I am going back to development after an year and my last droid was kinda different from a Nexus
Lot has changed since then, new fancy tools and all
I will try my best and report back ASAP
akshaybz said:
I don't think there are major changes in framework since then..it should work
It will take me some time coz I am going back to development after an year and my last droid was kinda different from a Nexus
Lot has changed since then, new fancy tools and all
I will try my best and report back ASAP
Click to expand...
Click to collapse
And I am more than willing to be the test dummy Thanks!
^^ what this poster said
Status update:
So, I spent past couple of hours trying to port the recent apps mod to the PA and CM but it didn't work out :crying:
I was able to do the changes and compile the SystemUI.apk and framework-res.apk but when I flash the zip, the SystemUI just keeps crashing on the boot..
"SystemUI has stopped working."
I was using this guide:
http://forum.xda-developers.com/showthread.php?t=2187184
Well, this guide has some problems..
It says:
/res/layout-port/status_bar_recent_item.xml
Click to expand...
Click to collapse
There is no such folder "layout-port" in res..
Then I checked OPs mod which he supposedly created using the same guide...I decompiled his SystemUI.apk but guess what...there wan't any "layout-port" either...
Then I thought that I should change that in the "layout" folder itself...(and later I found out that the OP has done the same)
But still..no gain Force Closes everytime
There was one more problem that there wasn't any id "android:id="@id/recents_clear" in the ids.xml..but I solved that problem.
I can upload the zip which force closes if anyone wants to test stuff too
akshaybz said:
Status update:
So, I spent past couple of hours trying to port the recent apps mod to the PA and CM but it didn't work out :crying:
I was able to do the changes and compile the SystemUI.apk and framework-res.apk but when I flash the zip, the SystemUI just keeps crashing on the boot..
"SystemUI has stopped working."
I was using this guide:
http://forum.xda-developers.com/showthread.php?t=2187184
Well, this guide has some problems..
It says:
There is no such folder "layout-port" in res..
Then I checked OPs mod which he supposedly created using the same guide...I decompiled his SystemUI.apk but guess what...there wan't any "layout-port" either...
Then I thought that I should change that in the "layout" folder itself...(and later I found out that the OP has done the same)
But still..no gain Force Closes everytime
There was one more problem that there wasn't any id "android:id="@id/recents_clear" in the ids.xml..but I solved that problem.
I can upload the zip which force closes if anyone wants to test stuff too
Click to expand...
Click to collapse
1st this is a cm10 guide...
2nd the layout port is the portrait maybe its the layout(single) folder!!!
pikachukaki said:
1st this is a cm10 guide...
2nd the layout port is the portrait maybe its the layout(single) folder!!!
Click to expand...
Click to collapse
1. Yep, it is CM10 guide and the person who wrote this used the same to apply mod on CM10.1...
2. Yep I know it's portrait that's why I have mentioned that I already tried changing in the single folder...
I then tried to do this:
http://forum.xda-developers.com/showthread.php?t=2241739
Still SystemUI crashed..which means that something's wrong in the compilation method...I was using Virtous Studio
akshaybz said:
1. Yep, it is CM10 guide and the person who wrote this used the same to apply mod on CM10.1...
2. Yep I know it's portrait that's why I have mentioned that I already tried changing in the single folder...
I then tried to do this:
http://forum.xda-developers.com/showthread.php?t=2241739
Still SystemUI crashed..which means that something's wrong in the compilation method...I was using Virtous Studio
Click to expand...
Click to collapse
The think is that in layout and layout_land you need to remove the whole code and paste his...the thing is that if you compare the 2 codes you can see that alot of change in recents code but you remove alot of code existing..im pretty sure thats causing the FC's i try with a guide for 10.1 and i still have this problem...systemui refuse to load even when the phone reboots properly..so maybe if we exclude the fact that we can copy and paste...the code there is old and cm has added a lot of stuff in it after that...so we need someone who knows to check the code and apply it to a newest version of cm...
and remember those guides are for cm if your trying to do it on a PA or SLIM or anyother heavy tweaked rom you will mess a hell lot more things!
This is a port of PAC 4.2.2 v22.1 from http://forum.xda-developers.com/showthread.php?t=2177236
For further information you should go to that thread and see what the ROM is capable of.
All i have done is change the KERNEL with BPauls kernel from his CM10.1 Rom from http://forum.xda-developers.com/showthread.php?t=2262795
and also changed the build.prop and updater-script so that it would install on the Xperia Acro S.
All bugs present in the original ROM will most likely also be present now.
Credits go to funky0308, Shingers5 and Vertigo for the ROM and Bpaul for the kernel.
---------------------
Latest Relase (14/05/13) ****Small issue with mounting the normal storage wait till i fix that before installing this version if you downloaded it, if you have already go back to recovery and install my previous version then i will fix and you can install the new one.
Fixed External SD card not mounting
Fixed Rotation Issue
Initial Release (13/05/13)
Download the ROM from Download mirror
GAPPS from http://goo.im/gapps/gapps-jb-20130301-signed.zip
Install Instructions are:
1. Unlock bootloader.
2. Extract and Flash boot.img from hikari_PAC_JB_4.2.2-v22.1.1_Themed-v2.zip (fastboot flash boot boot.img)
3. Go in to recovery:
-- On boot led will be violet for 3 second. During this period press vol+
-- Flash ROM
-- Flash Gapps
-- Wipe data (factory reset)
-- Reboot.
If coming from BPauls CM 10.1 or Official CM10 you can skip step 1 and 2.
If coming from a previous build of mine you can skip the WIPE data part as well unless you get FC i have never had an issue.
Known Bugs
none as of 14/05/13
1)Hi The rotation is wrong, when you turn right the phone turng left and when you put head up the phone head off
2)Dont install the External SD Card (microsd)
You use the ACRO S kernel or S Kernel ?? this is very important
Regards
Juan
juanenbas said:
1)Hi The rotation is wrong, when you turn right the phone turng left and when you put head up the phone head off
2)Dont install the External SD Card (microsd)
You use the ACRO S kernel or S Kernel ?? this is very important
Regards
Juan
Click to expand...
Click to collapse
I used the Acro S kernel from BPaul so it should work i will take a look at it tonight might just be a lib file i missed.
When i was using root explorer it did say SDCARD0 and 1 so it might have something to do with that so i will see if the microSD card is being mounted properly, been meaning to buy one so will grab one and test.
Also i will look into the proximity sensor probably the same issue with rotation too.
OK my friend, surely any file is missed about Rotation and SDCARD01 (microsd)
Thanks a lot...and your ROM is GUAUUUUU only thats two bug
Regards
Juan
Very slow, has alot of Sony bloatware but good job porting.
lewis021 said:
Very slow, has alot of Sony bloatware but good job porting.
Click to expand...
Click to collapse
Did you wipe data, and cache and Dalvik cache because mine is very smooth, i use 3D launcher and camera loads alot quicker then stock. I dont want to change it much from the one im porting from. However if i do get around to building everything from source i will be sure to limit what is installed by default.
Have a question, If I come from BPaul ROM 4.2.2 if necesary Flash boot.img from hikari_PAC_JB_4.2.2-v22.1.1_Themed-v2.zip ?? or Can used the boot.img from BPAUL ??
Thanks
Juan
juanenbas said:
Have a question, If I come from BPaul ROM 4.2.2 if necesary Flash boot.img from hikari_PAC_JB_4.2.2-v22.1.1_Themed-v2.zip ?? or Can used the boot.img from BPAUL ??
Thanks
Juan
Click to expand...
Click to collapse
No it isnt. You just need to have the option to be able to flash the ROM i will amend the instructions to make that clear.
deedwar said:
No it isnt. You just need to have the option to be able to flash the ROM i will amend the instructions to make that clear.
Click to expand...
Click to collapse
Thanks my friend, when arrive to my house I will flash again with correct boot.img
Did you test Fix rotation and Fix MicroSD ? are working well ??
reagards
Juan
juanenbas said:
Thanks my friend, when arrive to my house I will flash again with correct boot.img
Did you test Fix rotation and Fix MicroSD ? are working well ??
reagards
Juan
Click to expand...
Click to collapse
Sure did, just let me know if they dont work for you.
Shouldnt this be in the development forum?
Sent from my 4.2.2 Xperia S via Tapatalk
I wasn't sure because all I did was port. Been a little more involved than I originally thought but nothing major. Feel free to move it to development if that is where it is meant to be.
Sent from my Xperia Acro S using Tapatalk 2
Great Deedwar I wait your Fix, and after will test for you
regards
Juan
deedwar said:
Did you wipe data, and cache and Dalvik cache because mine is very smooth, i use 3D launcher and camera loads alot quicker then stock. I dont want to change it much from the one im porting from. However if i do get around to building everything from source i will be sure to limit what is installed by default.
Click to expand...
Click to collapse
CM10.1 runs alot smoother. I see many Xperia plugins and unnecessary apps.
Sent from my LT26w using xda premium
Deedwar you has finished the fix ?, in this case upload and I can test the same
regards
Juan
juanenbas said:
Deedwar you has finished the fix ?, in this case upload and I can test the same
regards
Juan
Click to expand...
Click to collapse
I fixed the rotation issue but every time I think I fix the external card it disables the internal.
Sent from my Xperia Acro S using Tapatalk 2
deedwar said:
I wasn't sure because all I did was port. Been a little more involved than I originally thought but nothing major. Feel free to move it to development if that is where it is meant to be.
Sent from my Xperia Acro S using Tapatalk 2
Click to expand...
Click to collapse
You could always message vertigo as he's the official PAC man and tell him what you've done and ask if you can post it in development. As long as it credits the correct people (which u already have) i wouldn't have thought that would be a problem?
Sent from my 4.2.2 Xperia S via Tapatalk
Ben36 said:
You could always message vertigo as he's the official PAC man and tell him what you've done and ask if you can post it in development. As long as it credits the correct people (which u already have) i wouldn't have thought that would be a problem?
Sent from my 4.2.2 Xperia S via Tapatalk
Click to expand...
Click to collapse
Already gotten their permission never would steal someone else's hard work without there blessing. Will fix the issue with external card mounting and might do that then. Thanks
Have a questions in your Latest Relase (14/05/13) you was using PACman v22.0.1 - Themed v3 ???... or..... PACman v22.1.1 - Themed v2 ??
Because the error with External SD could be from V22.0.1 Version 3 (Old Nozomi) !!!
Regards
Moved to the development thread here
HELLO ALL GRAND FELLAS!
I am here just to share the tablet ui mod for our galaxy grand. It can be done by any newbie but if you want the things to get faster you can view this thread.
NOTE: If you want to apply a new theme, you need to first change the dpi of your phone to 190/240(190 recommended) i.e editing the lines in build.prop. choose your desired theme and again change the dpi to 160!
REQUIREMENTS:
1. CM10.1 on your GRAND.
2. Xposed installer and AppSettings.
3. Your favorite launcher (I prefer golauncher), u can use nova launcher too or even holo launcher.
4. cm10.1update.zip and cm10.1restore.zip.
5. Root explorer or any app to edit your build.prop.
HOW TO INSTALL:
1. Install Xposed installer and AppSettings.
2. Go to Xposed installer and click on install. After installing go to modules and tick AppSettings.
3. Now go to AppSettings and set the dpi as follows--
(i)Browser: dpi=240
(ii)Contact: dpi=240
(iii)Messaging: dpi=182/240 (thanks to jomota7)
(iv)Phone: dpi=240
(v)Phone/Messaging storage: dpi=240
4. Go to root explorer to edit your build.prop, navigate to system folder, open build.prop and edit this line--
default->ro.sf.lcd_density=240
edited->ro.sf.lcd_density=160 5. Install go launcher or any other launcher that you prefer.
6. Copy both the .zip files(cm10.1update.zip & cm10.1restore.zip) to your extsdcard.
7. Reboot into recovery.
8. Browse to where you copied your both the files. And install cm10.1update.zip.
9. Reboot.
10. You can always go back to your default Phone ui. Just flash the cm10.1restore.zip and change the dpi in build.prop to 190 or 240 (I prefer 190, gives a perfect look to cm on Grand)
11. You don't need to wipe your data, cache or dalvik cache!
:good:Thats it! You got your Tablet ui on your GRAND!:good:
Downloads:
1. cm10.1update.zip-- http://d-h.st/bMd
2. cm10.1restore.zip-- http://d-h.st/nIu
Screenies attached at the end of the post!
Some useful links:
1.Xposed installer-- http://forum.xda-developers.com/showthread.php?t=1574401
2.AppSettings-- http://forum.xda-developers.com/showthread.php?t=2072081
3.Es file explorer(to edit build.prop)-- https://play.google.com/store/apps/details?id=com.estrongs.android.pop&hl=en
P.s.:
1. This is my 1st post on xda, so please correct my mistakes!
2. I am not a full fledged dev, so don't expect much of bug solving on this mod. Will try my best to provide you with the solutions!
3. Thanks for patiently viewing this thread.
CREDITS-
1. Samsung for this awesome GALAXY GRAND.
2. pawitp for his fantastic work to get cm10.1 for grand.
3. Caldair for his guide and support-- http://forum.xda-developers.com/showthread.php?t=2243247
4. All the devs of our Grand community to indirectly motivate to do some development for our Grand!
5. Other great devs on xda whom i have forgotten to mention!
Welcome mate!!!
thanks for making this mod....
gr8 work bro.
k2wl said:
Welcome mate!!!
thanks for making this mod....
Click to expand...
Click to collapse
Sarath280 said:
gr8 work bro.
Click to expand...
Click to collapse
Thanks for the motivation guys
Sent from my GT-I9082 using xda premium
Great work, like. The pictures settings remember when found the possibilities change DPI....in Grand Duos.
The message (sms) you cant change in 182->240->320DPI (yes is same app in S III lol)
karipari95 said:
Thanks for the motivation guys
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
u r welcome
For help people don´t see my post and karipari95 (i answered you) have this post: OPTIMIZE DPI system/app in 5'' screen
Using the right apps and DPI you transform your Grand duos in PC portable lol. For now only use my portable for flash CWM or root devides i fix from friends lol.
For now in test diferents DPI and increase font because some people need big fonts lol.
"CM10.1 on your GRAND."
Right.... Now understand this point. It's need install Rom cm10.1 first.
Lol I install in Rom cook by custom cook and error appear. Lol.
Put a uplink to tread for cm10.1. I need this phone operational 2 chip's, sow I not install cm.
Change DPI is good but some people don't like small font. Just need increase font in app settings or in settings android.
Thanks karipari95.
Jomota7 said:
"CM10.1 on your GRAND."
Right.... Now understand this point. It's need install Rom cm10.1 first.
Lol I install in Rom cook by custom cook and error appear. Lol.
Put a uplink to tread for cm10.1. I need this phone operational 2 chip's, sow I not install cm.
Change DPI is good but some people don't like small font. Just need increase font in app settings or in settings android.
Thanks karipari95.
Click to expand...
Click to collapse
Agree with your point. Depends on personal choice. Thanks for your support jomota. Appreciate your help!
Sent from my GT-I9082 using xda premium
EDIT- Updated OP.
To change theme along with this mod please read the NOTE in OP.
Great work !!! really liked this UI.. but can someone make it work on Stock rom with a rooted grand??? I need the 2 sims support....Thanks
abhijitg2 said:
Great work !!! really liked this UI.. but can someone make it work on Stock rom with a rooted grand??? I need the 2 sims support....Thanks
Click to expand...
Click to collapse
we can't make
Awesome work mate...highly appreciated.... :thumbup:
Sent from my GT-I9082 using Tapatalk 2
why
chotu222 said:
we can't make
Click to expand...
Click to collapse
@chotu222 why can't we use this on stock rooted firmware, I'd really like to be able to use it as I'm more comfortable with landscape mode and plz try to make it work on stock firmware thnx for your insight and effort
dr_m_shaltout said:
@chotu222 why can't we use this on stock rooted firmware, I'd really like to be able to use it as I'm more comfortable with landscape mode and plz try to make it work on stock firmware thnx for your insight and effort
Click to expand...
Click to collapse
The tool OP has used doesn't patch stock ROMs, it only patches custom ROMs (AOKP, AOSP, CM, PA). Which means that to achieve real tablet Ui on stock ROM one has to do the job manually, and for this one needs to mod android.policy.jar, services.jar and frameworks-res.jar.
As for me I'm currently trying, and so far I only half succeeded.
Tablet mode works and apps like settings open in split view, and I managed to have the bottom mini tray to work (look at the screenshots below).
I still didn't figure out how to merge the notification top bar with the navigation bottom bar and I'm not sure I will be able to do it, but let's be optimistic:silly:...
Nice job @unclefab.... Will wait for it... :thumbup:
Sent from my GT-I9082 using Tapatalk 2
unclefab said:
The tool OP has used doesn't patch stock ROMs, it only patches custom ROMs (AOKP, AOSP, CM, PA). Which means that to achieve real tablet Ui on stock ROM one has to do the job manually, and for this one needs to mod android.policy.jar, services.jar and frameworks-res.jar.
As for me I'm currently trying, and so far I only half succeeded.
Tablet mode works and apps like settings open in split view, and I managed to have the bottom mini tray to work (look at the screenshots below).
I still didn't figure out how to merge the notification top bar with the navigation bottom bar and I'm not sure I will be able to do it, but let's be optimistic:silly:...
Click to expand...
Click to collapse
@unclefab
first of all thnx for ur efforts it is a dream to have the tablet ui on stock as I need the dual sim function and can't flash CM
what u have achieved till now is excellent and I hope u will be able to complete the mod it will be awesome and thank you again for your effort grand without developers is nothing keep the good work
Can I flash the provided zip on latest cm10.1?
Sent from my GT-I9505 using xda premium
tanishque italia said:
Can I flash the provided zip on latest cm10.1?
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
No. it is based on older version. I ll update it to the latest version when i m not busy!
Sent from my GT-I9082 using Tapatalk 2