Develop Bugs

Help with bricked Note 2

Hello.. So today I attempted to flash a new version of TWRP for installing cleanrom and it bricked my phone. I can get into download mode though
So using ODIN i've been trying to install custom recoveries. Everytime it says pass, but I cannot get a recovery to show up. If I hold up, power and home buttons, the Galaxy note 2 will flash (as if its about to load a recovery) but then just goes back to galaxy note 2 screen. I can still make it to download mode, but cannot seem to get anywhere else.
Also, currently there is no rom on my phone.
Please help!
Thanks,
AC

AC2020x said:
Hello.. So today I attempted to flash a new version of TWRP for installing cleanrom and it bricked my phone. I can get into download mode though
So using ODIN i've been trying to install custom recoveries. Everytime it says pass, but I cannot get a recovery to show up. If I hold up, power and home buttons, the Galaxy note 2 will flash (as if its about to load a recovery) but then just goes back to galaxy note 2 screen. I can still make it to download mode, but cannot seem to get anywhere else.
Also, currently there is no rom on my phone.
Please help!
Thanks,
AC
Click to expand...
Click to collapse
Maybe use odin to start over fresh? Is the recovery separate from the kernel in the Note II?
Sent from my Apple IIe

billyjed said:
Maybe use odin to start over fresh? Is the recovery separate from the kernel in the Note II?
Sent from my Apple IIe
Click to expand...
Click to collapse
I think it is separate. The last thing I had was beanstalk with neak kernel. Then I wiped everything (not sure if that affect kernel or not) to prepare for cleanrom.
How do I use odin to start fresh?
Thanks!

AC2020x said:
I think it is separate. The last thing I had was beanstalk with neak kernel. Then I wiped everything (not sure if that affect kernel or not) to prepare for cleanrom.
How do I use odin to start fresh?
Thanks!
Click to expand...
Click to collapse
Install a factory image (probably with root and custom recovery) then proceed to flash whatever from there.
Sent from my Apple IIe

billyjed said:
Install a factory image (probably with root and custom recovery) then proceed to flash whatever from there.
Sent from my Apple IIe
Click to expand...
Click to collapse
Okay thanks,
I will have to try this after work. This may be a stupid question, but if anyone knows a good location where I can find this that would be really helpful.
I can search around for it more later.
Thanks

I bet Google knows.
Sent from my Apple IIe

SamMobile is a great site for firmwares.

After the screen turns on, let go of power and continue to hold up and home. Try it out.

johntortorella said:
SamMobile is a great site for firmwares.
Click to expand...
Click to collapse
mertin said:
After the screen turns on, let go of power and continue to hold up and home. Try it out.
Click to expand...
Click to collapse
Thanks.. I'm downloading from Sam Mobile now on my laptop at work.
And thanks for the tip. I will try this out as soon as I get home. I really hope my phone isn't pertinently bricked!

AC2020x said:
Thanks.. I'm downloading from Sam Mobile now on my laptop at work.
And thanks for the tip. I will try this out as soon as I get home. I really hope my phone isn't pertinently bricked!
Click to expand...
Click to collapse
If you need something to follow, this will help too.
Link

when you're "bricked" that means you can NOT get into download mode, so you are NOT bricked....

wase4711 said:
when you're "bricked" that means you can NOT get into download mode, so you are NOT bricked....
Click to expand...
Click to collapse
Oh sorry, I wasn't sure what the term bricked actually encompassed. I guess I was stuck in bootloop then.
Well, good and bad news. I got out of the bootloop, and finally got twrp installed on my phone. I did a recovery of beanstalk and also a fresh install of cleanrom. While they boot, they both have been going extremely slowly. Also just loading into recovery is taking super long. I don't know why. I am also not getting any signal, I can however connect to wifi. Anyone have any ideas or any thoughts on how to fix this?
Thanks again!

hey
if you can get into download mode try this find your provider and phone model and download the firware the nice thing this has root already installed so then you can just download goo and install twrp easy i always use this
http://forum.xda-developers.com/showthread.php?t=2004650
make sure you read it all so you have no problems all done with odin make sure you double check the check mark boxes well read and you will know what i am talking about

bigtomcat said:
if you can get into download mode try this find your provider and phone model and download the firware the nice thing this has root already installed so then you can just download goo and install twrp easy i always use this
http://forum.xda-developers.com/showthread.php?t=2004650
make sure you read it all so you have no problems all done with odin make sure you double check the check mark boxes well read and you will know what i am talking about
Click to expand...
Click to collapse
Just tried it out and it had the same problem. installed with ODIN no problem, but I still have no signal and it is still running very choppy.
When I go to mobile networks in settings it tells me "Insert SIM card to access network services" I have a sim and have tried reinserting it multiple times. I don't know whats going on. Also, it seems I do not have any internal storage. It says 200mb in storage that are fully used. When I have cleared everything but the rom.
I may attempt to return the phone tomorrow.

hey
AC2020x said:
Just tried it out and it had the same problem. installed with ODIN no problem, but I still have no signal and it is still running very choppy.
When I go to mobile networks in settings it tells me "Insert SIM card to access network services" I have a sim and have tried reinserting it multiple times. I don't know whats going on. Also, it seems I do not have any internal storage. It says 200mb in storage that are fully used. When I have cleared everything but the rom.
I may attempt to return the phone tomorrow.
Click to expand...
Click to collapse
nope a lot of people have that problem you have to remove your sim card and sd card and flash again then reboot i have seen people do this 3 times to clear all the bad flashes stuck on there phones make sure to factory reset too after by being off then hold down home power and volume up when you see the words pop up let go of all but volume up get into the system setting there factory all and restart then once you give it about 10 min put you sim card and sd card back and before wipe the sd card it has been know to cause some problems if that all doesn't work then ya maybe there is something else
good luck

[Q] Galaxy Note 2 i317 Won’t Boot After Update

Issue
1. Phone won’t boot beyond the Samsung Logo.
2. It won’t boot into recovery (download mode works).
3. Can flash rom using Odin but phone still won't boot.
Type of Phone
Type: AT&T Samsung Galaxy Note 2
Model: i317
Ownership: Bought in Nov 2012 brand new. Warranty is up but it is insured through AT&T.
History: Rooted and then un-rooted and returned to stock in January 2014.
Actions leading up to Issue
Updated to Samsung’s newest firmware Android 4.3 but didn’t like it. I rooted my phone and tried a custom rom but wasn’t happy. Un-rooted by flashing original stock rom via Odin 3.07. Worked great and I was back in business. But then the phone went through an update and never booted back up.
Detail
I’ve rooted all my other phones but never felt the need to root this one until I updated to Samsung’s new Android 4.3. I wasn’t happy with the decreased battery life and poor performance. So I used the method at http://forum.xda-developers.com/showthread.php?t=2004650 to root my phone using “root66_ATT_I317UCALJ2.tar.md5” with Odin 3.07 and it worked. I then tried a custom Cyanogen Mod rom but it still left something to be desired.
After more research I flashed the original stock rom “KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar.md5” via Odin 3.07 and my phone worked beautifully, at least for a day. Then I started getting the AT&T update window for Android 4.3 and the only way to get rid of it was to pull my battery. It was happening so much that I couldn’t even make a phone call. Out of pure frustration I decided to accept the update.
After the update installed it rebooted and never made it past the Samsung logo. So I figured I would just go into recovery and perform a factory reset as well as wipe the cache. The problem here is that it won’t boot into recovery. Only download mode works. I’m also seeing a red LED which I’ve read is a sign of SDS.
I’ve tried re-flashing the original stock rom again. Every time I do I get the green “Pass” display but my phone still won’t boot. The binary count is now at 21 since I’ve tried flashing so many times. I’ve been working on this and researching for 3 weeks. I’ve never had an issue that I couldn’t resolve when it comes to any of my past phones but this is beyond my skill or understanding. I also tried Samsung keys but it says my device is not supported.
Short of digging a hole in my back yard and burying it, is there anything I can do to fix this?
(Note) My wife has the same phone and also didn’t like the update so I flashed the same original stock rom to her phone via Odin and it has been working just fine. Only difference is I never rooted hers. I should have gone that route with mine.

Have you tried flashing, via Odin, just a custom recovery?
If that works, you may be able to follow this guide, starting at post #2.
http://forum.xda-developers.com/showthread.php?t=2618447
If that doesn't work, it is possible you have an emmc issue.... Your symptoms are similar to what others have reported here recently. You might be able to get a repair covered if you can get them to look past the custom counter ... You are running stock firmware... Maybe kies tripped the counter... Stranger things have happened...
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

Zen Arcade said:
Have you tried flashing, via Odin, just a custom recovery?
If that works, you may be able to follow this guide, starting at post #2.
http://forum.xda-developers.com/showthread.php?t=2618447
If that doesn't work, it is possible you have an emmc issue.... Your symptoms are similar to what others have reported here recently. You might be able to get a repair covered if you can get them to look past the custom counter ... You are running stock firmware... Maybe kies tripped the counter... Stranger things have happened...
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks I'll give it a try. I had thought about it but was afraid to mess things up even more. Is there one that you would recommend?

josh3josh3 said:
Thanks I'll give it a try. I had thought about it but was afraid to mess things up even more. Is there one that you would recommend?
Click to expand...
Click to collapse
Here's the link to TWRP (you want the Odin link toward the bottom):
http://teamw.in/project/twrp2/124
Here's the direct link to the latest philz cwm (you want the md5 file):
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/t0lteatt
I prefer philz, but you will likely need TWRP to follow the dicksteele guide. You should also track down a CWM flashable recovery package for MH3 recovery to flash back should you need to return the phone for repairs. You can get this by following the i317 link in my sig.
If flashing this in Odin doesn't work that would tend to support the emmc fail scenario. (i.e. you flash it, Odin behaves as if it flashed ok, you power off, attempt to boot recovery with home-VolUp-power and it still doesn't boot). If it does boot recovery, you can try the guide as I mentioned before. Good luck!

Zen Arcade said:
Have you tried flashing, via Odin, just a custom recovery?
If that works, you may be able to follow this guide, starting at post #2.
http://forum.xda-developers.com/showthread.php?t=2618447
If that doesn't work, it is possible you have an emmc issue.... Your symptoms are similar to what others have reported here recently. You might be able to get a repair covered if you can get them to look past the custom counter ... You are running stock firmware... Maybe kies tripped the counter... Stranger things have happened...
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried each of those just now and they both flashed fine however there is no change. I guess before I break out the shovel I'll try to see if AT&T will fix it since I do pay for the insurance. Thanks for the help that was good stuff. I wish it could have worked.

josh3josh3 said:
I tried each of those just now and they both flashed fine however there is no change. I guess before I break out the shovel I'll try to see if AT&T will fix it since I do pay for the insurance. Thanks for the help that was good stuff. I wish it could have worked.
Click to expand...
Click to collapse
if you have nothing else to lose, can you try flashing the boot loader on this link
http://d-h.st/Krs from this thread
http://forum.xda-developers.com/showthread.php?t=2589891
then try one of the official odin package or this:http://d-h.st/DGZ

So, there appear to be many people who see this update as a bad joke. Like me.
I had a thread a couple days ago about how to kill the notification from att
Without root. Nothing can be done as far as ive heard/seen. Im a bit confused
About needing a battery pull to remove pp note, I have been just reboot and it
Goes away until next data use/net access. When my 8 hrs is up I turn data on
(Data off as 8hrs expires) and immediately get note and then I hit home- get
another 8 hrs. Im sorry to hear they wore you down with the note- im going to
fight and resist for the duration. And keep stock. Its a game now!
R, john

qkster said:
if you have nothing else to lose, can you try flashing the boot loader on this link
http://d-h.st/Krs from this thread
http://forum.xda-developers.com/showthread.php?t=2589891
then try one of the official odin package or this:http://d-h.st/DGZ
Click to expand...
Click to collapse
Tried it and it failed to flash. Now I have the yellow triangle. At least its something different. Still no good though. Reflashed stock rom and I'm back to the Samsung logo. Was worth a shot. Thanks.

Try param and tz package mentioned in post #3 here.... Might be something
http://forum.xda-developers.com/showthread.php?t=2596256
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

josh3josh3 said:
Tried it and it failed to flash. Now I have the yellow triangle. At least its something different. Still no good though. Reflashed stock rom and I'm back to the Samsung logo. Was worth a shot. Thanks.
Click to expand...
Click to collapse
You flashed LJ2 Stock ROM from ODIN?
And you are back to the Samsung Logo that flashing/pulsing blue???
If so .....
Pull the battery and let the phone sit for a few seconds, pop the battery in and boot into stock recovery (HOLD VOL UP+HOME+POWER) and do a FACTORY RESET then reboot.
I had to do the same thing an hour ago....

dicksteele said:
You flashed LJ2 Stock ROM from ODIN?
And you are back to the Samsung Logo that flashing/pulsing blue???
If so .....
Pull the battery and let the phone sit for a few seconds, pop the battery in and boot into stock recovery (HOLD VOL UP+HOME+POWER) and do a FACTORY RESET then reboot.
I had to do the same thing an hour ago....
Click to expand...
Click to collapse
Have tried that many times with no luck. Wish it were that simple.

josh3josh3 said:
Have tried that many times with no luck. Wish it were that simple.
Click to expand...
Click to collapse
Have you tried this yet ?
http://forum.xda-developers.com/showpost.php?p=49826416&postcount=9

Zen Arcade said:
Try param and tz package mentioned in post #3 here.... Might be something
http://forum.xda-developers.com/showthread.php?t=2596256
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I can't believed it worked. Flashed this and suddenly I have recovery. Then I re-flashed the original stock rom, did a reset and wiped the cache and I'm back up and running. Brilliant I say. Genius! Thank you for the great post and thanks everyone for your help. Seems like there should be a like button or something so that you get credit but I don't see one. This was my first time ever posting on any forum so I'm a little ignorant.

josh3josh3 said:
I can't believed it worked. Flashed this and suddenly I have recovery. Then I re-flashed the original stock rom, did a reset and wiped the cache and I'm back up and running. Brilliant I say. Genius! Thank you for the great post and thanks everyone for your help. Seems like there should be a like button or something so that you get credit but I don't see one. This was my first time ever posting on any forum so I'm a little ignorant.
Click to expand...
Click to collapse
That would be the Thanks button by the Quote...
OUTSTANDING !!!
Glad you're back among the living.
This will get you back to 4.1.2
http://forum.xda-developers.com/showpost.php?p=49616718&postcount=2
EDIT:
I just did this and it worked perfectly .....
I'm actually doing that step right now also. I flashed back to stock testing the ATT update server.
EDIT #2:
At this step when the phone reboots the script will run. When it completes you want to boot to system. The next prompt will be do you want to install ROOT. If you do the swipe it will install ROOT, there is a DO NOT INSTALL button on the middle of the screen. Just a heads up, don't know if you are turning your phone back in or not now.
- Second step is:
You will need to download TWRP 2.6.3.1 and flash it in ODIN.
http://goo.im/devs/OpenRecovery/t0lt...lteatt.img.tar
This is necessary for an openrecovery script to run that is stored in the /cache directory from the update.
- Put your Note 2 in Download Mode.
- Open ODIN, put openrecovery-twrp-2.6.3.1-t0lteatt.img.tar in PDA slot. Click Start and let the phone reset.
- Your phone will reboot in TWRP. If not, pull battery and enter recovery mode boot into TWRP recovery (HOLD VOL UP+HOME+POWER). The script will run by itself.

sgh-i317 EFS seems like its gone
could anybody help me out with my note 2. ive tried just about everything i can think of. im getting pretty desperate. i can get everything to work fine (recovery,download mode,) but something is keeping it from booting up to the main screen, it will just hand at the boot animation, or the att logo. in twrp it tells me failed to mount efs. ive looked around in the file folders and its like it got wiped out? im not sure how though. could that be why its not booting up?
any ideas??

[Q] no service after root, trying to get my regular phone bacl

I'm pretty sure I made a rookie mistake and I'm facing the conscience. Last night I was need of rooting my phone (at&t galaxy note II i317) using Kongo Android to get superUS and everything was going fine, I still had all my stuff, service and everything, so I decided to add a custom ROM (cm-10.1.3-tOlteatt), wiped everything and I ended up in a bad situation, I forgot to back up my phone so I lost all of my contacts, lost my service provider so I have no signal, and can't download any apps because I don't have play store. . . If anyone knows to way to help solve this PLEASE HELP ME. . . all I want to do now is find a way to uninstall all this rooted stuff and go back to my regular functioning galaxy s note II
THANK YOU FOR THE HELP IN ADVANCE

Check here for help:thumbup::
http://forum.xda-developers.com/showthread.php?p=49616709
You can also look here:
http://forum.xda-developers.com/showthread.php?p=41340941
And you should have used this for your rooting needs...
http://forum.xda-developers.com/showthread.php?p=33854391
And from the sounds of it, you downloaded the wrong Rom for your phone! And it's always bad skiing stuff late when we're tired. That's when we run into problems. It's called late night flashing
Sent from my SAMSUNG-SGH-I317 using Tapatalk

ViiRuZ said:
I'm pretty sure I made a rookie mistake and I'm facing the conscience. Last night I was need of rooting my phone (at&t galaxy note II i317) using Kongo Android to get superUS and everything was going fine, I still had all my stuff, service and everything, so I decided to add a custom ROM (cm-10.1.3-tOlteatt), wiped everything and I ended up in a bad situation, I forgot to back up my phone so I lost all of my contacts, lost my service provider so I have no signal, and can't download any apps because I don't have play store. . . If anyone knows to way to help solve this PLEASE HELP ME. . . all I want to do now is find a way to uninstall all this rooted stuff and go back to my regular functioning galaxy s note II
THANK YOU FOR THE HELP IN ADVANCE
Click to expand...
Click to collapse
Let's turn the frown upside down..... How's it going ??

Bajanman said:
Check here for help:thumbup::
http://forum.xda-developers.com/showthread.php?p=49616709
You can also look here:
http://forum.xda-developers.com/showthread.php?p=41340941
And you should have used this for your rooting needs...
http://forum.xda-developers.com/showthread.php?p=33854391
And from the sounds of it, you downloaded the wrong Rom for your phone! And it's always bad skiing stuff late when we're tired. That's when we run into problems. It's called late night flashing
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Thanks for the recommendation but I've previously tried the method, but my phone always failed to download (even when it wasnt rooted) would u have any other way of solving it without having to use odin. . . my phone is currently stuck in recovery mode so any help trying to get out of it would be helpful. .thank you for your time helping me solve my issue

Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.

ViiRuZ said:
Thanks for the recommendation but I've previously tried the method, but my phone always failed to download (even when it wasnt rooted) would u have any other way of solving it without having to use odin. . . my phone is currently stuck in recovery mode so any help trying to get out of it would be helpful. .thank you for your time helping me solve my issue
Click to expand...
Click to collapse
Ranger is correct, try doing what he suggested.
But not really understanding what you have tried from your post.....
Which method, and what does fail to download?
Do you mean fail to get into download mode, and you only can get into recovery?
Are you doing this to get to download mode?
Put your Note 2 in Download Mode
-First you will need to turn off your device.
-Once it’s off, you need to press this button combination: volume down, power button and home button.
-Keep them pressed until the download mode shows up.
-Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Obviously you want to press the volume up. Now you are ready to ODIN flash.

rangercaptain said:
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
Click to expand...
Click to collapse
i will be sure to try this method whenever i get my hands on an SD card adaptor. What ROM would be best to download for the correct at&t APN settings? i would look but my past luck has been failure.
Thank you for your help

dicksteele said:
Ranger is correct, try doing what he suggested.
But not really understanding what you have tried from your post.....
Which method, and what does fail to download?
Do you mean fail to get into download mode, and you only can get into recovery?
Are you doing this to get to download mode?
Put your Note 2 in Download Mode
-First you will need to turn off your device.
-Once it’s off, you need to press this button combination: volume down, power button and home button.
-Keep them pressed until the download mode shows up.
-Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Obviously you want to press the volume up. Now you are ready to ODIN flash.
Click to expand...
Click to collapse
i would have tried ODIN for this situation but everytime i do. It says "FAILED" how would you suggest i fix this so that my phone can use ODIN. I was going from cyanogenMod to a custom ROM, but i assume i didnt flash the old ROM and now i kinda stuck in a bootloop like it'll show the samsung intro then show the customROM emblem stays there. I've left it in that state for a whole night and it didnt change (still showing the custom ROM emblem) the only thing i can do is enter TWRP v2.6.3.1 and access my external SD.

ViiRuZ said:
i would have tried ODIN for this situation but everytime i do. It says "FAILED" how would you suggest i fix this so that my phone can use ODIN. I was going from cyanogenMod to a custom ROM, but i assume i didnt flash the old ROM and now i kinda stuck in a bootloop like it'll show the samsung intro then show the customROM emblem stays there. I've left it in that state for a whole night and it didnt change (still showing the custom ROM emblem) the only thing i can do is enter TWRP v2.6.3.1 and access my external SD.
Click to expand...
Click to collapse
I don't understand this ....... It says "FAILED" What is failing ?
What are you flashing?

dicksteele said:
I don't understand this ....... It says "FAILED" What is failing ?
What are you flashing?
Click to expand...
Click to collapse
Sorry bout that. . just tried to connect my phone to ODIN in ODIN MODE. I'll update with what happened.
Just got done trying to flash with ODIN, and it got the part where it starts to install but 4 mins. in my device was removed. I was using the PDA from sammobile.com, and now my phone is saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." i know it might be as simple as actually doing what it says but Kies will not recognize my At&t samsung galaxy note II. What would u suggest to let my laptop recognize my device??

rangercaptain said:
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
Click to expand...
Click to collapse
Thank you for your time helping me with my phone issue. I took the steps you suggested, now im running custom ROM jellybean 4.1.1. and got my service provider back. If you could suggest away to get my stock program and upgrade to jellybean 4.3. I had fun with the rooted life but i make the worst mistakes.
PS. i found it to be alot easier using the other tar. in the firmware u suggested me to use. At least for At&t Samsung Galaxy Note II

rangercaptain said:
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
Click to expand...
Click to collapse
So i just flashed my at&t Samsung galaxy note II with jellybean 4.1.1 using Odin ( ATT_I317UCAMA4_I317ATTAMA4) and it was going on with everything working. Then i tried to update to jellybean 4.3 after it got done installing it rebooted, and what do u know, i'm stuck in boot loop the Samsung galaxy note 2 logo, and cant access recovery mode. Also I tried the original firmware that used repeatedly,would that hurt the system. Would there be any firmwares suggested to use.

ViiRuZ said:
So i just flashed my at&t Samsung galaxy note II with jellybean 4.1.1 using Odin ( ATT_I317UCAMA4_I317ATTAMA4) and it was going on with everything working. Then i tried to update to jellybean 4.3 after it got done installing it rebooted, and what do u know, i'm stuck in boot loop the Samsung galaxy note 2 logo, and cant access recovery mode. Also I tried the original firmware that used repeatedly,would that hurt the system. Would there be any firmwares suggested to use.
Click to expand...
Click to collapse
So you did the OTA update to 4.3?
I've been where you are lots of times....
Try post #2 from here
http://forum.xda-developers.com/showthread.php?t=2618447

dicksteele said:
So you did the OTA update to 4.3?
I've been where you are lots of times....
Try post #2 from here
http://forum.xda-developers.com/showthread.php?t=2618447
Click to expand...
Click to collapse
yes it updated and installed but after it installed and rebooted its in
a constant boot loop. Is this going to be a simple permanent fix?

ViiRuZ said:
yes it updated and installed but after it installed and rebooted its in
a constant boot loop. Is this going to be a simple permanent fix?
Click to expand...
Click to collapse
Yes
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

dicksteele said:
So you did the OTA update to 4.3?
I've been where you are lots of times....
Try post #2 from here
http://forum.xda-developers.com/showthread.php?t=2618447
Click to expand...
Click to collapse
Thank you for your help, i honestly do thank you. Its good that people like you are out there and are helpful enough to guides us (the ones who mess up)

ViiRuZ said:
Thank you for your help, i honestly do thank you. Its good that people like you are out there and are helpful enough to guides us (the ones who mess up)
Click to expand...
Click to collapse
Not a problem. Just giving back from all the help I've received over the years,

Anyone have a boot loop issue?

Earlier this evening, after texting a friend, my phone rebooted itself.
It appears to be in a boot loop. It will only reboot into rebooting. Never loads Android. I pulled the battery, let it sit for a few minutes, and tried again with no results.
I've not done modding to the phone (mainly because its locked), and will be returning it to my local AT&T store tomorrow. Thankfully I have insurance on my phone, so I shouldn't have an issue getting a new one.
Anybody else had this issue, however? It's really strange.

Majin Kaioh said:
Earlier this evening, after texting a friend, my phone rebooted itself.
It appears to be in a boot loop. It will only reboot into rebooting. Never loads Android. I pulled the battery, let it sit for a few minutes, and tried again with no results.
I've done modding to the phone (mainly because its locked), and will be returning it to my local AT&T store tomorrow. Thankfully I have insurance on my phone, so I shouldn't have an issue getting a new one.
Anybody else had this issue, however? It's really strange.
Click to expand...
Click to collapse
Read a guide on flashing back to stock. Use ODiN and flash the stock file of your choice in the ATT note 4 forum from Download mode. Google how to boot into download mode. Hold those buttons until phone powers off then keep holding until you see download mode. You will need to install samsung drivers and for ODiN on Windows go to Devices coms and ports and change port to 3 in advanced tab.

sudoBacon said:
Read a guide on flashing back to stock. Use ODiN and flash the stock file of your choice in the ATT note 4 forum from Download mode. Google how to boot into download mode. Hold those buttons until phone powers off then keep holding until you see download mode. You will need to install samsung drivers and for ODiN on Windows go to Devices coms and ports and change port to 3 in advanced tab.
Click to expand...
Click to collapse
I updated my post to add in a missing word. I havn't done any modding. I do not intend to do any flashing to the device.
I'll be returning it to AT&T tomorrow and getting a new one. My question was if anyone has had this issue before. Thanks for your response. Unfortunately, does not address my question.

sudoBacon said:
Read a guide on flashing back to stock. Use ODiN and flash the stock file of your choice in the ATT note 4 forum from Download mode. Google how to boot into download mode. Hold those buttons until phone powers off then keep holding until you see download mode. You will need to install samsung drivers and for ODiN on Windows go to Devices coms and ports and change port to 3 in advanced tab.
Click to expand...
Click to collapse
I have had my share of boot looping experiences, never from not doing any type of experiments with my devices. nonetheless myself and I'm sure many other people just do what was mentioned in the quote to alleviate that problem.
i know you (OP) mentioned you don't plan on doing any flashing, but i would do that before using insurance personally, even if there was no deductible

Majin Kaioh said:
I updated my post to add in a missing word. I havn't done any modding. I do not intend to do any flashing to the device.
I'll be returning it to AT&T tomorrow and getting a new one. My question was if anyone has had this issue before. Thanks for your response. Unfortunately, does not address my question.
Click to expand...
Click to collapse
This process is not dangerous if your phone is in a bootloop. Hell AT&T or whatever carrier probably does this themselves if a phone is in this kind of situation. If not rooted or any mods you will still have OTA updates. If you are worried about carrier recognizing if you modded it or something and they wont take it back dont worry just flash it using ODiN. I've rooted many devices hacked compiled roms flashed them and kernels s-offed etc. You can always get back to stock remove flags and your carrier will take it back no matter what just dont return a device with the actual mods on it.

Why not just try to reset the device from the recovery menu? If it's a stock phone it should fix the bootloop.
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app

jack man said:
Why not just try to reset the device from the recovery menu? If it's a stock phone it should fix the bootloop.
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app
Click to expand...
Click to collapse
It won't fix what sounds like a missing or corrupted boot file, had to deal with it on a LG g3.. restoring a full back up or a plain reset had no effect.. it was either doing a full flash or flashing the boot files
for that phone it would randomly happen when the OTA tried to upgrade the device while it was rooted, took me 3 times of dealing with it before I realized OTA was still live

Small update. My local AT&T store has a replacement being sent to me. I'm unhappy, however, since its apparently a refurbished device. I pay for insurance that covers a new device if something, anything, happens. They're refusing to send me a new one for some reason that they won't explicitly state to me.
My loyalty with AT&T has wavered, and I will probably be on another network in coming months. I'm thinking Sprint so that I can least have an unlocked Note 4.
Regardless, since this device is being sent back, I decided to try and Odin flash it anyways. It did not work. Still boot loops at the Note 4/Android screen. Doesn't even load the AT&T logo. I'm fairly certain something is fundamentally broken with the device. Probably a factory error. It's never been dropped, and has been inside a hard case since day one.
Being that it is a manufacturing error, I'm not to angry about that. These things do happen. AT&T's treatment of me, however, is just unacceptable. I've been a customer for about eight years, and have been on Android since the Motorola Backflip. I upgraded to a Samsung Captivate and never looked at another manufacturor.

Are you able boot to the recovery menu?
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app

i have the bootloop issue before to put *#9090#
the loop is every aprox 3 mins
some sugestion?¡

sudoBacon said:
This process is not dangerous if your phone is in a bootloop. Hell AT&T or whatever carrier probably does this themselves if a phone is in this kind of situation. If not rooted or any mods you will still have OTA updates. If you are worried about carrier recognizing if you modded it or something and they wont take it back dont worry just flash it using ODiN. I've rooted many devices hacked compiled roms flashed them and kernels s-offed etc. You can always get back to stock remove flags and your carrier will take it back no matter what just dont return a device with the actual mods on it.
Click to expand...
Click to collapse
Good evening,
my n910A is stocked in Bootlop ,
I did try also to flash via odin the 4 zipped md5 files from this forum but nothing changed : http://forum.xda-developers.com/note-4-att/general/to-stock-files-latestcoc4-build-t3107391
when I press volume up+power+home it show LRX22C.N910AUCU1COC4 but the version on the label of my box is N910AUCU1ANIE ,
I don't know if I should go back to the previous version and how to do it ?????
or something else??????
please help because I am lost
thanks

thepinkpanter said:
Good evening,
my n910A is stocked in Bootlop ,
I did try also to flash via odin the 4 zipped md5 files from this forum but nothing changed : http://forum.xda-developers.com/note-4-att/general/to-stock-files-latestcoc4-build-t3107391
when I press volume up+power+home it show LRX22C.N910AUCU1COC4 but the version on the label of my box is N910AUCU1ANIE ,
I don't know if I should go back to the previous version and how to do it ?????
or something else??????
please help because I am lost
thanks
Click to expand...
Click to collapse
Try downloading one of sunderwares stock firmwares in a newer 3.10 odin after extracting the zip with contained files. I recommend latest OC4 just re flash it a different one or try again

sudoBacon said:
Try downloading one of sunderwares stock firmwares in a newer 3.10 odin after extracting the zip with contained files. I recommend latest OC4 just re flash it a different one or try again
Click to expand...
Click to collapse
I already did it but by using Odin 3.09 pls. see http://forum.xda-developers.com/note-4-att/general/to-stock-files-latestcoc4-build-t3107391/page5
maybe I did something wrong
or from where can I get / download a different N910AUCU1COC4 ?
thanks again for your kind help

Question about tmobile G95TUVU3DOI1

Hi, I'm kinda new to rooting android phone.I just got a galaxy s6 edge from tmobile and I would lIke to root the phone. Searching around the forum but still doesn't ubderstand how's it work. So I got a galaxy s6 edge, baseband version G95TUVU3DOI1, come with 5.1.1 SMG 925T. Question is if I'm root the phone will i able to restore back to stock firmware, will tmobile able to find out if I rooted or not? Because I'm in Jump! Program and plan to switch new phone next year. And its there any easy step by step guide to root the phone. I don't really care about Samsung pay, would like to have fingerprint sensor if possible. Thank you

Before you do anything, understand that you WILL TRIP KNOX AND BREAK SAMSUNG PAY. Also, it is your choice to modify your device and this process seems to work differently for differnt people, so if anything happens, it's on you. However, there are several threads here that can help you if anything goes wrong
Okay, make a backup of all your stuff on SmartSwitch
You're going to want to download ODIN 3.10.7 from here: http://forum.xda-developers.com/showthread.php?t=2711451
Then you're going to want to download UniKernel v8 from here: http://forum.xda-developers.com/gal...d-development/kernel-stockmod-kernel-t3100395
Open ODIN on your computer and don't touch anything yet
Then you're going to put your phone into download mode by turning it off, then holding POWER+VOL DOWN+HOME until a blue screen appears.
Press VOL UP to enter download mode and connect your phone to your computer with the cable that came with your phone
Wait for the little box at the top left to turn blue
On ODIN, click the AP button and locate the UniKernel v8 file that you downloaded before
Once you've found it, double click it to fill in the AP field with the file
Click START and do not touch anything until it's done.
Your phone will restart and once it comes back up, you'll be rooted. It can take several minutes for it to fully boot, so give it time.
Now, this is optional, but if you want a custom recovery to flash custom ROMS, download TWRP onto your computer from here: http://forum.xda-developers.com/tmo...recovery-twrp2-8-6-0-g925t-5-1-1-of6-t3143002
Flash that file through ODIN using the same process as you used to flash UniKernel.
This recovery will let flash custom ROMs. I recommend XstreStoLite as it is very good on battery life, but you will not be able to use WiFi calling or VOLTE. You can download it here: http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968
Let me know how it goes.

Can I unroot in the future if I want to go back to stock?

Osui818 said:
Can I unroot in the future if I want to go back to stock?
Click to expand...
Click to collapse
Yes. You'll just have to download the latest firmware from here or Sammobile.com and flash it using ODIN

Thank you. One last question, any chance using Odin will brick the device?

Osui818 said:
Thank you. One last question, any chance using OdinYes there will brick the device?
Click to expand...
Click to collapse
Yes. There is a small chance, but the method I described is the exact same method I used on my device and I've had no issues. Even if you do, there is almost a 0% chance of a hard brick unless you touch something you're not supposed to touch, and if you do soft brick, there are a few threads here that should be able to help. More than likely flashing stock firmware will fix any problems you have.

thanks akw for the run through, I've been away from android for 4 months and ran back to it. just got this phone and wanna quickly root it.

eruscool said:
thanks akw for the run through, I've been away from android for 4 months and ran back to it. just got this phone and wanna quickly root it.
Click to expand...
Click to collapse
No problem, buddy. Hope it goes well for you.

Akw6190 said:
No problem, buddy. Hope it goes well for you.
Click to expand...
Click to collapse
i need help too. i am trying to use smart switch as my last resort but its not working(ish). after installing the factory firmware it says the device will restart, unplug and plug it again. on the phone it reset itself and then with the green android logo saying installing system then 1/3 of the loading bar it just says erasing then blacked out then back on bootloop. i can still boot to recovery mode and download mode.

godefroy28 said:
i need help too. i am trying to use smart switch as my last resort but its not working(ish). after installing the factory firmware it says the device will restart, unplug and plug it again. on the phone it reset itself and then with the green android logo saying installing system then 1/3 of the loading bar it just says erasing then blacked out then back on bootloop. i can still boot to recovery mode and download mode.
Click to expand...
Click to collapse
Where are you getting the firmware from? What version of ODIN are you using? What port are you using in ODIN to flash the firmware?
There is a Mega download of the DOI1 firmware somewhere around here. I recommend downloading that and flashing using the AP port in ODIN 3.10.7, using the cable that came with your phone. This is the exact method I used to return to stock with no issues.