Hello,
sorry for my bad english.
After update my phone to 6.0.1, i lose service but the sim card is detected.
Here is my phone information:
-model: huawei rio-l01
-build number: rio-l01c02b340
Thank you for your help
Same problem here, just got theis Huawei G8 with this same problem, i don't know if the problem came when the guy gave it to me when he updated to 6.0.1 ...
Sim card is detected, sim contacts are detected, but no signal...
here are some pictures: http://imgur.com/a/ikdv9
I "accidentally" erased my whole OS (Android 6.0.1) then managed to install new on from huawei website, everything worked but still...no service
Hi, fix this problem? no detected sim card?
se8a1980 said:
Hi, fix this problem? no detected sim card?
Click to expand...
Click to collapse
you have to install emui 3.1 again for your model using fastboot method, you have a dual sim device
have to unlock your boot loader
ernestico911 said:
you have to install emui 3.1 again for your model using fastboot method, you have a dual sim device
have to unlock your boot loader
Click to expand...
Click to collapse
I have the 6.0 stock, emui 4.0 and from there I put the RR custom. As the tutorial says.
se8a1980 said:
I have the 6.0 stock, emui 4.0 and from there I put the RR custom. As the tutorial says.
Click to expand...
Click to collapse
Well done then, how it works RR custom for you?
I have the same Problems. After flashing with DC Phoenix and reflash the original B170 Firmware my Simcard is detected, but I don't have a Cell Network. What can i do in this case? Boot loader is open and TWRP is installed.
Gesendet von iPhone mit Tapatalk Pro
Is it no solution for this case?
I have a same problem too.
ernestico911 said:
you have to install emui 3.1 again for your model using fastboot method, you have a dual sim device
have to unlock your boot loader
Click to expand...
Click to collapse
i have unlocked the bootloader previously and the sim card still getting no network... maybe something gotta do with where i bought it? bought it when vacationing to china... maybe phones sold in china only supported some 4G band? anyone?
loopin said:
i have unlocked the bootloader previously and the sim card still getting no network... maybe something gotta do with where i bought it? bought it when vacationing to china... maybe phones sold in china only supported some 4G band? anyone?
Click to expand...
Click to collapse
No sir, china models support all networks bands, just flash emui 3.1 via fastboot method
Related
I bought a galaxy nexus online in italy (imported).
The firmware is Yakjuxw and was not updated. I had a card H3G italy and everything worked ok.
I then updated to yakju and was always ok. I had Android 4.2.1
Today I changed my carrier and not read any sim Wind Italy
you can not tell me another radio to flash it correctly?
or at least I can redo the procedure to bring him yakjuxw?
how do I fix it without having to bring in help?
I discovered dall'imei by samsung which is imported Romanian
sounds like your phone was temporary unlocked and after flashing yakju you lost the unlock.. now the phone only accepts sim of the carrier its locked to.. the only way to fix this is by either calling the carrier and getting a unlock code or buying the unlock code online..
PS- i can see you need help but next time post in the correct section :good:
the gnexus is not carrier locked...
other sim with other carrier goes well...only wind italy have problems
maybe i have flashed a not radio img compatibile?
Try this app, it says it's only for docomo network. But it worked fine for me, you have to be rooted for it to work tough.
http://forum.xda-developers.com/showthread.php?t=1548008
edit: Use the unlock method where you keep your IMEI code, could void warrenty otherwise.
devilmj said:
the gnexus is not carrier locked...
other sim with other carrier goes well...only wind italy have problems
maybe i have flashed a not radio img compatibile?
Click to expand...
Click to collapse
oh.. then i am not sure what the issue is... weird that it stop reading one specific carriers sim
I can confirm nexus phones comes factory unlocked regardless the county you purchased it from.
Make sure you don't have a bad baseband after the ROM update.
I bought mine in Canada under a Fido contract and it works fine here in Italy and anywhere else I have been with any carriers.
Sent from my Galaxy Nexus using Tapatalk 2
If you go under:
settings
more
mobile networks
-> Do you have wind Access point name
-> Try to with Network Operators if appear
Under About phone, what is yout Baseband?
anarkia1976 said:
If you go under:
settings
more
mobile networks
-> Do you have wind Access point name
-> Try to with Network Operators if appear
Under About phone, what is yout Baseband?
Click to expand...
Click to collapse
hi,
the problem is that the sim is not recognized by the phone...it not ask me the pin code!
Now i can check the baseband....i flash this adio-maguro-i9250xxla02.img then i think i have this xxla2
and not work with this carrier
i think i must flash the JB Baseband...XXLF1 = baseband Europe
to install it as long as I put it on the phone, go into recovery and do update zip?
But have you tried a total recovery?
devilmj said:
hi,
the problem is that the sim is not recognized by the phone...it not ask me the pin code!
Now i can check the baseband....i flash this adio-maguro-i9250xxla02.img then i think i have this xxla2
and not work with this carrier
i think i must flash the JB Baseband...XXLF1 = baseband Europe
to install it as long as I put it on the phone, go into recovery and do update zip?
Click to expand...
Click to collapse
Download baseband + ril from thread and flash from cwm ....!
anarkia1976 said:
Download baseband + ril from thread and flash from cwm ....!
Click to expand...
Click to collapse
ril is required?
I don't have it installed now..
Yes
Sent from my Galaxy Nexus using xda app-developers app
If he's running stock ROM, the baseband would have updated along with the 4.2.1 update...that's how my Nexus updated when I went to stock a few weeks ago...the bootloader also updates to the latest...the SIM is probably defective or that particular carrier runs on a different band (unlikely)...it could also be that the APN settings need to be entered manually like I have to do with Straight Talk.
Sent from my Galaxy Nexus using xda premium
devilmj said:
I
Today I changed my carrier and not read any sim Wind Italy
you can not tell me another radio to flash it correctly?
or at least I can redo the procedure to bring him yakjuxw?
how do I fix it without having to bring in help?
I discovered dall'imei by samsung which is imported Romanian
Click to expand...
Click to collapse
Ask your carrier to raplace the SIM card.
this telephone not read any sim...
how can i solve it?
devilmj said:
the gnexus is not carrier locked...
other sim with other carrier goes well...only wind italy have problems
maybe i have flashed a not radio img compatibile?
Click to expand...
Click to collapse
The radio will have nothing to do with it. Almost all GSM GNex radios are compatible with almost all GSM carriers in the world.
Segnale007 said:
I can confirm nexus phones comes factory unlocked regardless the county you purchased it from.
Click to expand...
Click to collapse
This is NOT true. There are many GNex devices that come carrier locked.
devilmj said:
hi,
the problem is that the sim is not recognized by the phone...it not ask me the pin code!
Now i can check the baseband....i flash this adio-maguro-i9250xxla02.img then i think i have this xxla2
and not work with this carrier
i think i must flash the JB Baseband...XXLF1 = baseband Europe
to install it as long as I put it on the phone, go into recovery and do update zip?
Click to expand...
Click to collapse
You probably have a bad SIM card.
devilmj said:
ril is required?
I don't have it installed now..
Click to expand...
Click to collapse
No.
maxon_yalta said:
Ask your carrier to raplace the SIM card.
Click to expand...
Click to collapse
+1. This
I eventually discovered that one of the pins of the sim reader is broken.
the adapter broke it, so now I have to replace it.
hardware problem, you can close.
thanks to all
Hi, i have LG g3s d722 from our operator Orange. I can clear ROM (Orange instal their application), so I flash latest official ROM D72210d_00.kdz. But after flash have problem with sim card. Sim card is intert in phone, after start, phone can PIN code, but telephone cant search network. Still write NO network. Sim card is on 100% good. I test antoher phone. Somebody help me? thanks
HellAngelxxx said:
Hi, i have LG g3s d722 from our operator Orange. I can clear ROM (Orange instal their application), so I flash latest official ROM D72210d_00.kdz. But after flash have problem with sim card. Sim card is intert in phone, after start, phone can PIN code, but telephone cant search network. Still write NO network. Sim card is on 100% good. I test antoher phone. Somebody help me? thanks
Click to expand...
Click to collapse
What does it say under your IMEI in System Settings? Does it still show your phones IMEI?
IMEI i check in system and dial *#06#. IMEI are same, than IMEI under battery
modem version is mpss.di.2.0.1.c1c15-00013-m8926daaaanazm-1
Hi, i have still problem with network. anyone has idea?
HellAngelxxx said:
Hi, i have still problem with network. anyone has idea?
Click to expand...
Click to collapse
Your phone probably doesnt supprt the network frequency that your carrier runs on
before flash works OK, problem with network was after flash official ROM
same problem here before it was fine after flashing cellular service keeps on dropping
Hi guys, I'm facing the same problem. Did you find solution?
Hi everyone,
Is there a way to flash the AT&T or any other Stock ROM to a T-mobile phone ?.
I'v tried ODIN (version 3.7, 3.8, 3.9 and 3.10) .and I can´t manage to get it flashed.
Tried by TWRP too, and it says thet the zip isnt good.
Thanks in advance.
Not directly, no.
dc/dc said:
Not directly, no.
Click to expand...
Click to collapse
You mean inderictly is it posible? (dont know how is inderectly ).
Yes, but it requires a seasoned developer to make the modifications necessary. I'm not sure why you'd want to do this though as the AT&T version is far more bloated.
dc/dc said:
Yes, but it requires a seasoned developer to make the modifications necessary. I'm not sure why you'd want to do this though as the AT&T version is far more bloated.
Click to expand...
Click to collapse
Thanks for your reply.
I absolutely have no that kind of skill.
Anyway, the real reason I came up with that idea is because I cant unlock my T-mobile phone, and I live outside the US.
I've heard and read that sim unlocks by code are having problems.
Unfortunately, flashing firmware will not aid you in unlocking. Have you already tried buying a code for your device?
dc/dc said:
Unfortunately, flashing firmware will not aid you in unlocking. Have you already tried buying a code for your device?
Click to expand...
Click to collapse
He said flashing a rom not firmware. Someone over in the s6 forums flashed a metro pcs rom and was able to unlock the tmobile s6.
dnkeyhnter said:
He said flashing a rom not firmware. Someone over in the s6 forums flashed a metro pcs rom and was able to unlock the tmobile s6.
Click to expand...
Click to collapse
ROM = Firmware. They're interchangeable terms. Also MetroPCS is owned by T-Mobile, so I don't see your point. Flashing software does not unlock the SIM card slot.
dc/dc said:
ROM = Firmware. They're interchangeable terms. Also MetroPCS is owned by T-Mobile, so I don't see your point. Flashing software does not unlock the SIM card slot.
Click to expand...
Click to collapse
My appologies, coming from HTC m8...
http://venomroms.com/rom-vs-firmware/
themrmind said:
Hi everyone,
Is there a way to flash the AT&T or any other Stock ROM to a T-mobile phone ?.
I'v tried ODIN (version 3.7, 3.8, 3.9 and 3.10) .and I can´t manage to get it flashed.
Tried by TWRP too, and it says thet the zip isnt good.
Thanks in advance.
Click to expand...
Click to collapse
yes you can flash metro pcs firmware via odin and unlock by code
noobsaibot34 said:
yes you can flash metro pcs firmware via odin and unlock by code
Click to expand...
Click to collapse
There is no MetroPCS firmware for the S6 Edge as they do not sell it.
my bad this works only on s6...didn't realize you had an Edge
Im living outside of usa .
I have flashed my t mobile s6 using metropcs and unlocked my s6 using a code purchased online.
I reflashed my t mobile software and its still unlocked.
Can i update to stock 5.1.1 using odin and have the device still unlocked .
Once phone unlock is done using a code is it a permanent unlock ?
younussm said:
Im living outside of usa .
I have flashed my t mobile s6 using metropcs and unlocked my s6 using a code purchased online.
I reflashed my t mobile software and its still unlocked.
Can i update to stock 5.1.1 using odin and have the device still unlocked .
Once phone unlock is done using a code is it a permanent unlock ?
Click to expand...
Click to collapse
which code did you ask for to unlock the sim, metroPCs(sm-g920T1) or T-mobile(sm-g920T)??, I asked for metroPCs(sm-g920T1) code and unlocked my T-mobile phone
did you updated to 5.1.1?? which T-mobile(5.1.1) or metroPCs(5.1.1) ?? did sim kept unlocked??
thank you
datrico89 said:
which code did you ask for to unlock the sim, metroPCs(sm-g920T1) or T-mobile(sm-g920T)??, I asked for metroPCs(sm-g920T1) code and unlocked my T-mobile phone
did you updated to 5.1.1?? which T-mobile(5.1.1) or metroPCs(5.1.1) ?? did sim kept unlocked??
thank you
Click to expand...
Click to collapse
Hello
I have a samsung s6 t mobile version .
Flashed the metro pcs to unlock the phone and reflashed the t mobile firmware .its still unlocked and at 5.0.1 .
Im still looking for answers if i upgrade my s6 to 5.1.1 will my phone will be unlocked .if you find any , do let me know .
Sent from samsung s6
younussm said:
Hello
I have a samsung s6 t mobile version .
Flashed the metro pcs to unlock the phone and reflashed the t mobile firmware .its still unlocked and at 5.0.1 .
Im still looking for answers if i upgrade my s6 to 5.1.1 will my phone will be unlocked .if you find any , do let me know .
Sent from samsung s6
Click to expand...
Click to collapse
Your phone was unlocked by code. It is permanent. It is not rom dependant. Just like you flashed a different rom than the metro pcs when you originally unlocked your phone, you can upgrade too.
Flash unbranded rom
I have an unlocked G920T (came locked from amazon, but unlocked easily via device unlock app preloaded)
Is there an unbranded firmware I can flash, even if its from a different variant?
Im also interested to know if i can flash a at&t firmware on my tmobile s6. Not for unlock but because the person i gave it to wants to use the ohone on at&t and feel like its an at&t phone. Whatever right? But can i do that? Or would it have to be a custom rom? Orignal firmware would be nice.
I was running the Taiwan ROM on my phone but went back to the Japan version when the Marshmallow update was released. Now the phone is screwed
It started off with the phone asking for a 'Network subsystem code' so the phone was essentially network locked and could only be accessed if the SIM was removed. I re-flashed the Taiwan ROM thinking it would go back to how it was but it still asked for the unlock code.
Maybe this was where I went wrong, but I bought an unlock code from eBay, entered it but after it rebooted it still asked for the code.
I tried a few TWRP backups but nothing worked and now it doesn't recognise a SIM at all. Nothing.
It's randomly restarting and I've also noticed that the IMEI number isn't showing up in the settings.
I have no idea what to do so if you have any ideas, please let me know...
Possible Fix
Try to flash misc.img. Its supposed to fix simlock for the taiwan version, and its the same image for both. You can find it at the bottom of my conversion guide.
Don't worry, you should flash your phone return to rom stock KDDI 5.0.2
then flash file fix sim pass: 8jtv
by adb change.
Code:
fastboot reboot-bootloader
fastboot flash misc misc.img
fastboot reboot
or unlock sim by xtc2clip
I have got no signal after I change my sim in KDDI 6.0 rom. I am sure that my sim card (UK sim) is not damaged, but my phone is not able to register to the network. I am now thinking of flashing back to JP 5.0.2 again
How about Taiwan?
ylt04 said:
I have got no signal after I change my sim in KDDI 6.0 rom. I am sure that my sim card (UK sim) is not damaged, but my phone is not able to register to the network. I am now thinking of flashing back to JP 5.0.2 again
Click to expand...
Click to collapse
If you dont need nfc, the taiwan ROM is better in every other way.
http://forum.xda-developers.com/butterfly-3/development/stock-rom-stock-5-0-2-cure-t3356875
or if you NEED to have nfc, you may need to manually scan for network(s) in settings and after that replace the apns-conf.xml file with one from cyanogenmod or any other universal rom, because data only works on its known network (au). You will also need to change from SMS to Messages apk and maybe change the call center number. (stock htc text messaging app)
Birkyjon said:
Try to flash misc.img.
Click to expand...
Click to collapse
mrquyen1993 said:
Don't worry, you should flash your phone return to rom stock KDDI 5.0.2
then flash file fix sim pass: 8jtv
Click to expand...
Click to collapse
No luck guys.. Tried both just in case they're different but I still have a non-phone
Gixermouse said:
No luck guys.. Tried both just in case they're different but I still have a non-phone
Click to expand...
Click to collapse
Did you solve it finally? I had the same problem, but I solved It by flashing a ROM on fastboot.
Hi i have g8 b150 lolipop firmware. It is dual sim phone. I dont understand the firmware naming quite a bit cause i just recently purchase this phone. I downloaded the b340 mm firmware but it said that software update failed after flashing. My question is. Do i have to be in latest lollipop firmware so i can flash mm firmware? Can someone explain to me the firmware naming structure for g8 dual sim and give me the link that suit for g8 dual sim firmware cause i dont want ended bricking my g8
Can someone please help me as well how to root this phone. Ive read the thread about rooting but its not working anymore to unlock bootloader. Any tips?
IzArsha said:
Hi i have g8 b150 lolipop firmware. It is dual sim phone. I dont understand the firmware naming quite a bit cause i just recently purchase this phone. I downloaded the b340 mm firmware but it said that software update failed after flashing. My question is. Do i have to be in latest lollipop firmware so i can flash mm firmware? Can someone explain to me the firmware naming structure for g8 dual sim and give me the link that suit for g8 dual sim firmware cause i dont want ended bricking my g8
Can someone please help me as well how to root this phone. Ive read the thread about rooting but its not working anymore to unlock bootloader. Any tips?
Click to expand...
Click to collapse
Are you sure your phone is Dual Sim ? i think b150 is for single sim check here and follow the correct numbers to update your phone to MM.
As per rooting the phone, you'll need to be more specific about why you are unable to do it, you can't obtain the unlock code ? or you can't get the connection through ADB ? or somethig else ?
ptothej said:
Are you sure your phone is Dual Sim ? i think b150 is for single sim check here and follow the correct numbers to update your phone to MM.
As per rooting the phone, you'll need to be more specific about why you are unable to do it, you can't obtain the unlock code ? or you can't get the connection through ADB ? or somethig else ?
Click to expand...
Click to collapse
Yes im pretty sure my phone is dual sim phone. It has dual sim management on setting. And yes i cant obtained the code. Is there any other way? Can u help me to get the code?
IzArsha said:
Yes im pretty sure my phone is dual sim phone. It has dual sim management on setting. And yes i cant obtained the code. Is there any other way? Can u help me to get the code?
Click to expand...
Click to collapse
Search the forum for the firmware update, Here people were mentioning same version and problems with finding the update
As per the unlock code try this one it goes to Chineese Huawei site if that doesn't work/help try contacting Huaweii support.
ptothej said:
Search the forum for the firmware update, Here people were mentioning same version and problems with finding the update
As per the unlock code try this one it goes to Chineese Huawei site if that doesn't work/help try contacting Huaweii support.
Click to expand...
Click to collapse
I dont find any helping post or detail answer on that thread. For the root i got stuck on step 3. Theres nothing on that website. Is it okay if i request the booloader unlock through email? Found that method on p8 lite forum
IzArsha said:
I dont find any helping post or detail answer on that thread. For the root i got stuck on step 3. Theres nothing on that website. Is it okay if i request the booloader unlock through email? Found that method on p8 lite forum
Click to expand...
Click to collapse
i would give it a shoot and send them an email
ptothej said:
i would give it a shoot and send them an email
Click to expand...
Click to collapse
Already emailed the huawei support but they asked me to just use the website. I really wanted to root this device to use TB. I tried flashing all latest frimware single sim or dual sim version but still no luck updating to MM. So my plan is to just root this phone and flashed RR and flashable stock rom available on the thread via TWRP. Is there any other way to get the bootloader unlock code mate? If there is no way to get the code, i plan to just sell this phone.
I successfully updated to MM now im searching for root. Can someone here help me to get the bootloader activation code using your account? I cannot open the unlock page. Please help me.
Nvm. I already rooted my device