I was running the Taiwan ROM on my phone but went back to the Japan version when the Marshmallow update was released. Now the phone is screwed
It started off with the phone asking for a 'Network subsystem code' so the phone was essentially network locked and could only be accessed if the SIM was removed. I re-flashed the Taiwan ROM thinking it would go back to how it was but it still asked for the unlock code.
Maybe this was where I went wrong, but I bought an unlock code from eBay, entered it but after it rebooted it still asked for the code.
I tried a few TWRP backups but nothing worked and now it doesn't recognise a SIM at all. Nothing.
It's randomly restarting and I've also noticed that the IMEI number isn't showing up in the settings.
I have no idea what to do so if you have any ideas, please let me know...
Possible Fix
Try to flash misc.img. Its supposed to fix simlock for the taiwan version, and its the same image for both. You can find it at the bottom of my conversion guide.
Don't worry, you should flash your phone return to rom stock KDDI 5.0.2
then flash file fix sim pass: 8jtv
by adb change.
Code:
fastboot reboot-bootloader
fastboot flash misc misc.img
fastboot reboot
or unlock sim by xtc2clip
I have got no signal after I change my sim in KDDI 6.0 rom. I am sure that my sim card (UK sim) is not damaged, but my phone is not able to register to the network. I am now thinking of flashing back to JP 5.0.2 again
How about Taiwan?
ylt04 said:
I have got no signal after I change my sim in KDDI 6.0 rom. I am sure that my sim card (UK sim) is not damaged, but my phone is not able to register to the network. I am now thinking of flashing back to JP 5.0.2 again
Click to expand...
Click to collapse
If you dont need nfc, the taiwan ROM is better in every other way.
http://forum.xda-developers.com/butterfly-3/development/stock-rom-stock-5-0-2-cure-t3356875
or if you NEED to have nfc, you may need to manually scan for network(s) in settings and after that replace the apns-conf.xml file with one from cyanogenmod or any other universal rom, because data only works on its known network (au). You will also need to change from SMS to Messages apk and maybe change the call center number. (stock htc text messaging app)
Birkyjon said:
Try to flash misc.img.
Click to expand...
Click to collapse
mrquyen1993 said:
Don't worry, you should flash your phone return to rom stock KDDI 5.0.2
then flash file fix sim pass: 8jtv
Click to expand...
Click to collapse
No luck guys.. Tried both just in case they're different but I still have a non-phone
Gixermouse said:
No luck guys.. Tried both just in case they're different but I still have a non-phone
Click to expand...
Click to collapse
Did you solve it finally? I had the same problem, but I solved It by flashing a ROM on fastboot.
Related
Yesterday i install a custom Rom 4.2.2 after kitkat cyanogenmod BR2. before installation i put my phone on airplane mode.
after installation my HD is showing signal bars (white colored) and on top no service and cross sign.
other sim networks works perfectly only Telenor network has this problem.
i have tried changing radio version. now i am on latest one.
i have tried full wipe and install again kitkat and jellybean no success.
please guys help me what should i do.
thanks (sorry for bad English)
Z4Zeeshan said:
other sim networks works perfectly only Telenor network has this problem.
Click to expand...
Click to collapse
So, other SIMs are working with different radio versions? I think that your phone is fine.
Z4Zeeshan said:
i have tried changing radio version. now i am on latest one.
i have tried full wipe and install again kitkat and jellybean no success.
Click to expand...
Click to collapse
Might be a trouble from operator side. Check Telenor SIM on other phone.
If it will work - flash factory ship ROM on yor DHD and flash original radion version.
It's strange mystical part, but stock ROM resolves a lot of troubles
No success
coloured_chalk said:
So, other SIMs are working with different radio versions? I think that your phone is fine.
Might be a trouble from operator side. Check Telenor SIM on other phone.
If it will work - flash factory ship ROM on yor DHD and flash original radion version.
It's strange mystical part, but stock ROM resolves a lot of troubles
Click to expand...
Click to collapse
Thanks for reply other sims works fine with ever version of radio only that telenor sim doesn't work as before flashing a new rom i put my DHD in airplane mode i think that is the main problem...
if i do same process with other sim ( before flashing other rom put DHD in airplane mode ) then that sim network will not work also..those sims will work fine in other cellphone.
like i use the same process( before flashing other rom put DHD in airplane mode ) with Mobilink sim it shows signals but when i call or sms it says Mobile network not available (in screenshot)
and when i use Telenor it says no service (in screenshot)
when i try to choose a mobile network manually in settings it says "your sim doesn't allow a connection to this network" (in screenshot).
and when i try to choose a mobile network automatically in settings it says "Can't connect to this network right now try again latter" (in screenshot).
other sims works fine
all screenshots are attached with other information
please help me.please :crying:
update : also tried latest RUU same problem again
Z4Zeeshan said:
Thanks for reply other sims works fine with ever version of radio only that telenor sim doesn't work as before flashing a new rom i put my DHD in airplane mode i think that is the main problem...
if i do same process with other sim ( before flashing other rom put DHD in airplane mode ) then that sim network will not work also..those sims will work fine in other cellphone.
like i use the same process( before flashing other rom put DHD in airplane mode ) with Mobilink sim it shows signals but when i call or sms it says Mobile network not available (in screenshot)
and when i use Telenor it says no service (in screenshot)
when i try to choose a mobile network manually in settings it says "your sim doesn't allow a connection to this network" (in screenshot).
and when i try to choose a mobile network automatically in settings it says "Can't connect to this network right now try again latter" (in screenshot).
other sims works fine
all screenshots are attached with other information
please help me.please :crying:
update : also tried latest RUU same problem again
Click to expand...
Click to collapse
This Is strange... Is your device made in china or taiwan?
Reason for asking this question is that, taiwanese made DHD normally generate certain problems out of the bloom that usually makes no sense.
From my understanding, When you flash a rom, you format the data partition and this partition holds every change you made to the os during the time of use. So there isnt any reason why a mode you left your phone in before flashing another rom should have such an effect.
Have you tried inserting another sim from the same mobile operator?
Edit:: And what rom is that? It looks nice. Can you give me a link to it?
mickeyasamoah said:
This Is strange... Is your device made in china or taiwan?
Reason for asking this question is that, taiwanese made DHD normally generate certain problems out of the bloom that usually makes no sense.
From my understanding, When you flash a rom, you format the data partition and this partition holds every change you made to the os during the time of use. So there isnt any reason why a mode you left your phone in before flashing another rom should have such an effect.
Have you tried inserting another sim from the same mobile operator?
Edit:: And what rom is that? It looks nice. Can you give me a link to it?
Click to expand...
Click to collapse
its not chinese version.. i know it is so strange can you tell me it looks like sim locked ?? if that happened may can be unlocked. and Rom is
http://forum.xda-developers.com/showthread.php?t=2533007
Z4Zeeshan said:
its not chinese version.. i know it is so strange can you tell me it looks like sim locked ?? if that happened may can be unlocked. and Rom is
http://forum.xda-developers.com/showthread.php?t=2533007
Click to expand...
Click to collapse
It cant be a simlock. It takes more than airplane mode to throw a device in sim lock.
And if it was sim lock, it would only accept one particular sim card and not accept some simcards and reject others.
These made in taiwan Desire HDs develop problems that dont mount up to any proper explanation, as i already said.
Like mine, its taiwanese made and when i take out the simcard, it runs smoothly, but as soon as i insert a simcard, the device becomes laggy/slow. i have tried so many things but they all dont seem to work. This isnt the only problem, there are others.
This only leaves me with the conclusion that, the taiwan made DHDs are immetations/fake.
mickeyasamoah said:
It cant be a simlock. It takes more than airplane mode to throw a device in sim lock.
And if it was sim lock, it would only accept one particular sim card and not accept some simcards and reject others.
These made in taiwan Desire HDs develop problems that dont mount up to any proper explanation, as i already said.
Like mine, its taiwanese made and when i take out the simcard, it runs smoothly, but as soon as i insert a simcard, the device becomes laggy/slow. i have tried so many things but they all dont seem to work. This isnt the only problem, there are others.
This only leaves me with the conclusion that, the taiwan made DHDs are immetations/fake.
Click to expand...
Click to collapse
thanks buddy my imei number is changed thats why this happend plz tell me how to use QPST ? any link ??
Z4Zeeshan said:
thanks buddy my imei number is changed thats why this happend plz tell me how to use QPST ? any link ??
Click to expand...
Click to collapse
Pls Lets Use The Other Thread.
Hi, i have LG g3s d722 from our operator Orange. I can clear ROM (Orange instal their application), so I flash latest official ROM D72210d_00.kdz. But after flash have problem with sim card. Sim card is intert in phone, after start, phone can PIN code, but telephone cant search network. Still write NO network. Sim card is on 100% good. I test antoher phone. Somebody help me? thanks
HellAngelxxx said:
Hi, i have LG g3s d722 from our operator Orange. I can clear ROM (Orange instal their application), so I flash latest official ROM D72210d_00.kdz. But after flash have problem with sim card. Sim card is intert in phone, after start, phone can PIN code, but telephone cant search network. Still write NO network. Sim card is on 100% good. I test antoher phone. Somebody help me? thanks
Click to expand...
Click to collapse
What does it say under your IMEI in System Settings? Does it still show your phones IMEI?
IMEI i check in system and dial *#06#. IMEI are same, than IMEI under battery
modem version is mpss.di.2.0.1.c1c15-00013-m8926daaaanazm-1
Hi, i have still problem with network. anyone has idea?
HellAngelxxx said:
Hi, i have still problem with network. anyone has idea?
Click to expand...
Click to collapse
Your phone probably doesnt supprt the network frequency that your carrier runs on
before flash works OK, problem with network was after flash official ROM
same problem here before it was fine after flashing cellular service keeps on dropping
Hi guys, I'm facing the same problem. Did you find solution?
I picked up a pre-owned Gold G3 yesterday, my last one went pop!
This new G3, is Sim Unlocked, but with a Vodafone UK rom (V10a.235.15). After researching and reading around.. the G3 has EFS, so I followed the KDZ back to stock guide and flashed the Open EU rom, which went without any issues and seemed as if it had flashed and replaced the VF Rom, but it still has the VF splash screen, a VF updates Icon (Which can be removed) and software version, yet the G3 still detected and Loaded in my EE UK APN settings and no sign of any VF APN.
http://forum.xda-developers.com/showthread.php?t=2785089
So am I right in thinking.. If I wanted to make this a full UK unbranded phone, so no splash screen with a software V10a.EUR.XX.. I would have to Jailbreak the EFS partition and Replace VFRom stored on the EFS with the EUR-XX rom.
OR am I wrong entirely, so... How does this work
There are so many threads on here, that ask the same questions in different ways, hence why Im a litle confused as how this works
Thanks
Wait Wait Wait
So you cant manually import APN settings right? How about flashing a Rom from another European country?
Dont tamper with the EFS partition under any circumstances. If you do you wont have a IMEI and your phone will be worthless. Carrier branding does not occur within the EFS partition
I remember my carrier apps disappeared from Update Center when i upgraded my Australian firmware to a Taiwan Firmware so im pretty sure it might work for you.
When you flash the KDZ make sure you flash it using CSE Flash Mode
itsbighead said:
Wait Wait Wait
So you cant manually import APN settings right? How about flashing a Rom from another European country?
Dont tamper with the EFS partition under any circumstances. If you do you wont have a IMEI and your phone will be worthless. Carrier branding does not occur within the EFS partition
I remember my carrier apps disappeared from Update Center when i upgraded my Australian firmware to a Taiwan Firmware so im pretty sure it might work for you.
When you flash the KDZ make sure you flash it using CSE Flash Mode
Click to expand...
Click to collapse
Can I just be clear before I answer... The G3 I bought is Branded to Vodafone UK, I am personally on EE UK and Im trying to remove the Vodafone Branding and make it a factory unlocked unbranded G3.
Thanks for the reply friend. I didnt have to enter any EE APN settings, they were already there, so not sure how that was... because I didnt enter them. Glad to hear its not the EFS, because I would rather use a branded phone and have it working than change its file system and mess it up. Also, I know the guide doesnt state it but I turned ON USB Debugging, would that make a difference
I followed the guide closely so did flash using CSE. Ill now flash another countries KDZ and let you know how i get on?
Could it be that Vodafone UK is the EU Open Rom, just a few minor changes..... What I dont understand is...
The EUR Open Rom flashes perfectly fine, reboots and starts... so why after a perfect flash using CSE, is the Vodafone UK rom still there. Any Ideas.
itsbighead said:
How about flashing a Rom from another European country?
Click to expand...
Click to collapse
Im afraid no Luck... I flashed Open France, still booted to VF rom with VF software on it v.10a-235-15), then installed "Italy Orange", which actually worked, booted up a clean LG rom BUT, even though its v.10a, When trying OTA update, it said I was n the latest OS, which is no good, then using LG PC Sync.. it just updated to the UK VF rom again (20h).
So I took a long shot and flashed Open UK, still the same.... boots into VF splash screen and software.. so, Im at a loss. This is why I reckon carriers hide a rom on the EFS partition.
Any thing to add
Thanks
So I was on Oreo and accidentally flashed back to 7.1.
Didn't brick it but now it doesn't recognize my sim even after flashing back to Oreo.
I tried to fastboot the tmo baseband but no luck there.
Anyone run across this or have any suggestions?
That was one of the 1st thing I ran across in the Oreo update thread. With development just really getting fired up I'll be surprised if you find a fix. If. I was you I would flash the mod that hides the unlocked bootloader warning and take it to TMobile. It's only a 5 dollor charge for defective devices. I've returned a total brick before.
So I am on the same board. The problem is I'm in UK and I cant claim warranty repair. Also my warranty was void in December soon when I generated bootloader unlock key.
SO what have I tried so far?
Hard brick bootloader to state when it is Qualcomm loader- only blank flash and Oreo Flash All is able to bring it back to live.
Ive also tried boot from B slot in twrp but it looks like my B partition is messed up. Fastboot will show red warning about no flashable A/B slot and only oreo flash can get it back to boot because it will oem lock itself.
When I get back fully on unlocked bootloader to 7.1.1 I cant update via adb sideload or update menu in settings. Both will fail.
Sim looks like it is detected on start but when taken out and slided back in it wont show up.
I have QCN area backed up with nv data but it wont help me.
Please note when boot is bricked oreo flash all will flash it on locked bootloader and will not show warning screen at all about botloader. However I was unable to boot to recovery from that point so I had to unlock it and flash 7.1.1 then oreo again.
So if someone could do nandroid backup of clear not set up rom it would be great. I can try restore it. I dont even know if twrp is able to do backup on A/B device.
Also if someone could read NV data from phone and share it ( from phone with working radio of course) would be really appreciated.
Can someone PM me NV backup? I need urgently qcn file. I think my hw partition is messed up. Please don't share it in this post as it can contain IMEI.
this is what i did, and why there is a giant post in caps in the thread that says not to do this. You essentially end up with a bootloader mismatch which hoses the radio. the only solution is a replacement.
and DONT DOWNGRADE !!!
byt3b0mb said:
this is what i did, and why there is a giant post in caps in the thread that says not to do this. You essentially end up with a bootloader mismatch which hoses the radio. the only solution is a replacement.
and DONT DOWNGRADE !!!
Click to expand...
Click to collapse
Sorry but warning isn't clear. I did not enjoy Oreo and was looking for unlock method.
Also bootloader match to my current Oreo rom and radio but still no sim detected so I think it is hw partition messed up. When I flash retail Oreo on it bootloader just change itself to retail Oreo version. Still no sim.
Device is useable as paperweight with WiFi
I think I've found a way to unbrick your phones guys!
If someone still has their bricked phone could they tell me what state they're in? I managed to successfully unbrick mines but had to stay on 8.0
Everything about the phone works 100% except the Sim slot. It's like it can't read the Sim. It knows there is a sim in, but it can't access it.
On Oreo oem retail version.
donjuro said:
I think I've found a way to unbrick your phones guys!
If someone still has their bricked phone could they tell me what state they're in? I managed to successfully unbrick mines but had to stay on 8.0
Click to expand...
Click to collapse
I'm happy to stay on 8 but need my sim get back to life. All works fine except SIM card is not detected.
My phone boot as normal. When downgraded it won't accept ota's. It won't install it via sideload too. SIM card remain undetected no matter what rom and what version( T-Mobile, retail, etc) when I try to boot from slot B via twrp it won't boot. It will show bootloader screen with unbootable a/B partition.
robdevil said:
I'm happy to stay on 8 but need my sim get back to life. All works fine except SIM card is not detected.
My phone boot as normal. When downgraded it won't accept ota's. It won't install it via sideload too. SIM card remain undetected no matter what rom and what version( T-Mobile, retail, etc) when I try to boot from slot B via twrp it won't boot. It will show bootloader screen with unbootable a/B partition.
Click to expand...
Click to collapse
i got a script that was able to get my tmobile variant back up and running on any version i installed please give this a try and let me know.
just copy all this to the platform tools drectory ans double click the oem flash.bat the oem lock.bat will re-lock your boot-loader if you want that as well.
pm me for a link to my drive since im still under 10 posts
Kaesberg said:
i got a script that was able to get my tmobile variant back up and running on any version i installed please give this a try and let me know.
just copy all this to the platform tools drectory ans double click the oem flash.bat the oem lock.bat will re-lock your boot-loader if you want that as well.
pm me for a link to my drive since im still under 10 posts
Click to expand...
Click to collapse
pm sent. i could use this
Please let us know if it works
Not OP, or guy with a link, but I did a similar bad thing and ended up on the retail Oreo without working SIM. What I did was take the modem file (the one that you fastboot flash to modem) from the tmo oreo zip and replaced the modem file in the retail oreo zip with the tmo one -- just change the name of the tmo modem file to the one that comes in the retail oreo zip and then run the retail flashall.
Still no way to get the latest tmo update that fixes some volte issues, though. Since I purchased within 14 days, I just added insurance and will probably end up drowning the phone to replace it... unless someone has a better idea. :/
breakerfall said:
Not OP, or guy with a link, but I did a similar bad thing and ended up on the retail Oreo without working SIM. What I did was take the modem file (the one that you fastboot flash to modem) from the tmo oreo zip and replaced the modem file in the retail oreo zip with the tmo one -- just change the name of the tmo modem file to the one that comes in the retail oreo zip and then run the retail flashall.
Still no way to get the latest tmo update that fixes some volte issues, though. Since I purchased within 14 days, I just added insurance and will probably end up drowning the phone to replace it... unless someone has a better idea. :/
Click to expand...
Click to collapse
Where did you get this modem?
mattlowry said:
Where did you get this modem?
Click to expand...
Click to collapse
from the tmo oreo zip here (bottom of the OP):
https://forum.xda-developers.com/z2-force/development/how-to-install-oreo-ota-t3726932
it's the NON-HLOS file
this is the retail oreo:
https://forum.xda-developers.com/showpost.php?p=75250794&postcount=82
I swapped the NONHLOS file from the tmo oreo into the retail oreo and I currently have working tmo service/SIM on the retail (tmo-less) oreo
donjuro said:
I think I've found a way to unbrick your phones guys!
If someone still has their bricked phone could they tell me what state they're in? I managed to successfully unbrick mines but had to stay on 8.0
Click to expand...
Click to collapse
My Moto Z Play is bricked, after downgrade of oreo to nougat, my imei not work. so i decided go to oreo again, when i reboot my phone bricked. help me please!!!
Try this. Updated my Sprint only thread to be a little more universal.
https://forum.xda-developers.com/z2-force/how-to/how-to-return-to-stock-sprint-t3694783
bricked moto z2 force tmobile
donjuro said:
I think I've found a way to unbrick your phones guys!
If someone still has their bricked phone could they tell me what state they're in? I managed to successfully unbrick mines but had to stay on 8.0
Click to expand...
Click to collapse
guys i tried blank flash oreo on mine bricked tmobile moto z2 force and it isnt working, any help would be great on this , thanks.. and also i have tried many blank flashes some for even other moto phone models none worked so far.. one or two of them got really close the oreo one did but failed at last part... tried about hundred times and yes i even tried holding down power and volume button with no success it didnt work it did though recognize the phone but still failed trying to boot or flash it though... seems to me it needs either up to date or just different blank flash it seems, but i dont know that for sure...
Hi, this is my first post. And im new on this teme of the Multi CSC roms.
I have a question, I get a ROM from SamMobile of my carrier Telcel in Mexico (TCE). I understand that the rom is multi csc, but when I flashed it all the bloatware (that in this case i need, VoLTE is only in my carrier) is from Claro (CHL), and I need it from Telcel. I sent a mail to SamMobile explaining this but they only answered me that the room its ok, the rom is multi CSC.
The CSC version that the system shows me is CHL/CHL/TCE, and I need TCE/TCE/TCE.
Anyone knows what I should do?
From my experience changing firmwares to enable volte, to fully restore csc it's flashing the firmware TCE, download from samfirm app on computer then factory reset from the firmware you have, flash TCE firmware with Odin and this it's the trick you need to have another carrier sim(no telcel) before flash the firmware TCE, wait for boot(don't put an account) when you are on the home screen turn off then enter recovery and factory reset and reboot, here when you swap the Sims, put the telcel sim on it and wait to fully boot and when you see the welcome screen you see a message that say the sim card it's different and need to reset, accept and wait for boot go to settings and check csc and now would be TCE\TCE\TCE
ALUCARD4DEAD said:
From my experience changing firmwares to enable volte, to fully restore csc it's flashing the firmware TCE, download from samfirm app on computer then factory reset from the firmware you have, flash TCE firmware with Odin and this it's the trick you need to have another carrier sim(no telcel) before flash the firmware TCE, wait for boot(don't put an account) when you are on the home screen turn off then enter recovery and factory reset and reboot, here when you swap the Sims, put the telcel sim on it and wait to fully boot and when you see the welcome screen you see a message that say the sim card it's different and need to reset, accept and wait for boot go to settings and check csc and now would be TCE\TCE\TCE
Click to expand...
Click to collapse
Do you really managed to change CSC from one operator (either one) to multi CSC ? And if you do so, can you make a guide for us?
pocos said:
Do you really managed to change CSC from one operator (either one) to multi CSC ? And if you do so, can you make a guide for us?
Click to expand...
Click to collapse
In my quest for fully change the csc without flash twrp and root to lose Knox warranty I ended with some smart guy that say the first two can be changed with flashing firmwares and the last one can only changed with root for that reason if you flash a different firmware region the two changed with the default csc on the multi csc and the last one stay same for example in this case MXO/MXO/TCE and the only way to return all the same it's using other carrier sim card temp until you flash the original firmware and then factory reset and when reboots swap sims putting the original carrier sim card in this particular case telcel
ALUCARD4DEAD said:
From my experience changing firmwares to enable volte, to fully restore csc it's flashing the firmware TCE, download from samfirm app on computer then factory reset from the firmware you have, flash TCE firmware with Odin and this it's the trick you need to have another carrier sim(no telcel) before flash the firmware TCE, wait for boot(don't put an account) when you are on the home screen turn off then enter recovery and factory reset and reboot, here when you swap the Sims, put the telcel sim on it and wait to fully boot and when you see the welcome screen you see a message that say the sim card it's different and need to reset, accept and wait for boot go to settings and check csc and now would be TCE\TCE\TCE
Click to expand...
Click to collapse
Thank you for your answer! But, let me see if I understood.
1- Put a sim from another carrier.
2- Factory Reset.
3- Flash the phone.
4- Turn on, and configure it.
5- Factory reset (again?)
6- Then put the Telcel SIM, before it starts completely
7- And finaly, in the "Welcome" screen, when the phone shows the message of the sim changed, perform another factory reset.
Let me know if I am right,
Right now I don't have another sim, i think that its rare that someone has another carrier But when I have it ill tell you what happenned
pocos said:
Do you really managed to change CSC from one operator (either one) to multi CSC ? And if you do so, can you make a guide for us?
Click to expand...
Click to collapse
al.rale said:
Thank you for your answer! But, let me see if I understood.
1- Put a sim from another carrier.
2- Factory Reset.
3- Flash the phone.
4- Turn on, and configure it.
5- Factory reset (again?)
6- Then put the Telcel SIM, before it starts completely
7- And finaly, in the "Welcome" screen, when the phone shows the message of the sim changed, perform another factory reset.
Let me know if I am right,
Right now I don't have another sim, i think that its rare that someone has another carrier But when I have it ill tell you what happenned
Click to expand...
Click to collapse
Yes basically that's the steps but in the step 5 it's important that you factory reset from recovery
ALUCARD4DEAD said:
Yes basically that's the steps but in the step 5 it's important that you factory reset from recovery
Click to expand...
Click to collapse
Hi,
At step 1 is any SIM or original CSC SIM?
pocos said:
Hi,
At step 1 is any SIM or original CSC SIM?
Click to expand...
Click to collapse
Depends what do you want to do.
In this particular case try to get original CSC TCE/TCE/TCE
He has CH/CH/TCE
If you wanna recover original CSC you need to have another carrier sim on step 1 and when you flash the original firmware go to recovery amd factory reset from there and when you put reboot in the process of boot you swap sims, put the original carrier, firmware sim
ALUCARD4DEAD said:
Depends what do you want to do.
In this particular case try to get original CSC TCE/TCE/TCE
He has CH/CH/TCE
If you wanna recover original CSC you need to have another carrier sim on step 1 and when you flash the original firmware go to recovery amd factory reset from there and when you put reboot in the process of boot you swap sims, put the original carrier, firmware sim
Click to expand...
Click to collapse
Actually I want to move from original CSC to another one!
ALUCARD4DEAD said:
Yes basically that's the steps but in the step 5 it's important that you factory reset from recovery
Click to expand...
Click to collapse
Do you know if the phone must be unlocked? I tried to do it but when I put the other sim, asks me for the carrier unlock code. The phone doesn't show me the message of the sim changed.
I've been some research and I found that Claro is Telcel in the rest of America Latina. Maybe its the reason that shows me Claro.
I tried the CSC secret code *#272*IMEI# and nothing happens, how i know if a ROM would let me do this?
pocos said:
Actually I want to move from original CSC to another one!
Click to expand...
Click to collapse
For that only flashing another firmware if you are from Mexico could you install MXO firmware it's the generic Mexican clean version and that you get MXO/MXO/TCE
The last one remains TCE this only can be change with root.
al.rale said:
Do you know if the phone must be unlocked? I tried to do it but when I put the other sim, asks me for the carrier unlock code. The phone doesn't show me the message of the sim changed.
I've been some research and I found that Claro is Telcel in the rest of America Latina. Maybe its the reason that shows me Claro.
I tried the CSC secret code *#272*IMEI# and nothing happens, how i know if a ROM would let me do this?
Click to expand...
Click to collapse
I don't try it with locked device, I think yes you needed unlocked, and yes claro it's from telcel what you have on your csc?
ALUCARD4DEAD said:
For that only flashing another firmware if you are from Mexico could you install MXO firmware it's the generic Mexican clean version and that you get MXO/MXO/TCE
The last one remains TCE this only can be change with root.
I don't try it with locked device, I think yes you needed unlocked, and yes claro it's from telcel what you have on your csc?
Click to expand...
Click to collapse
Actually I have the MXO/MXO/TCE, i've tried with the TCE rom, but still showing Claro. And these two roms doesn't allow the csc secret code. Don't you know what rom allows the csc secret code? I don't wanna try multiple roms from sammobile the download speeds are frustrating.
al.rale said:
Actually I have the MXO/MXO/TCE, i've tried with the TCE rom, but still showing Claro. And these two roms doesn't allow the csc secret code. Don't you know what rom allows the csc secret code? I don't wanna try multiple roms from sammobile the download speeds are frustrating.
Click to expand...
Click to collapse
Did you find anything? i have the same problem as you... when i dial the code, nothing happens i've tried on the ZTO, MXO and TCE
al.rale said:
Actually I have the MXO/MXO/TCE, i've tried with the TCE rom, but still showing Claro. And these two roms doesn't allow the csc secret code. Don't you know what rom allows the csc secret code? I don't wanna try multiple roms from sammobile the download speeds are frustrating.
Click to expand...
Click to collapse
Try download from samfirm it's more fastest download the full firmware it's pc exe.
Do you try the step mention above? With other sim factory reset from recovery and swap sims, when phone boots tells you the sim change and need to reset and then you get TCE/TCE/TCE
ALUCARD4DEAD said:
Try download from samfirm it's more fastest download the full firmware it's pc exe.
Do you try the step mention above? With other sim factory reset from recovery and swap sims, when phone boots tells you the sim change and need to reset and then you get TCE/TCE/TCE
Click to expand...
Click to collapse
Wow thank you! Im downloading it right now at 2.2 mb/s, compared with 100 kb/s of sammobile.
I tried anything and nothing works, I think that the unique solution is try with another OWA roms, I don't know if Telcel and Claro SIM's have similar identifiers and thats why returns me to Claro. Don't you know if there are roms with the csc menu activated?
TonyGzl92 said:
Did you find anything? i have the same problem as you... when i dial the code, nothing happens i've tried on the ZTO, MXO and TCE
Click to expand...
Click to collapse
Nope, do you think that the carrier lock relates with the problem?
Which sim carrier did you try?
Could I have problems if I try ATT or Movistar roms?
al.rale said:
Nope, do you think that the carrier lock relates with the problem?
Which sim carrier did you try?
Could I have problems if I try ATT or Movistar roms?
Click to expand...
Click to collapse
My phone was originally from att but I unlocked it and now use it on telcel and I want to use VoLTE with telcel. I would like to try the att or movistar firmwares but the problem is that (for what I've read) since the last att update was from like March the bootloader is older (v1) compared to telcel or MXO (v2) so you can't downgrade.
What carrier are you using? And what do you want it to be?
TonyGzl92 said:
My phone was originally from att but I unlocked it and now use it on telcel and I want to use VoLTE with telcel. I would like to try the att or movistar firmwares but the problem is that (for what I've read) since the last att update was from like March the bootloader is older (v1) compared to telcel or MXO (v2) so you can't downgrade.
What carrier are you using? And what do you want it to be?
Click to expand...
Click to collapse
As far I know to get VoLTE on telcel you need to buy phone directly with them, because uses the imei to enable that function
---------- Post added at 11:01 PM ---------- Previous post was at 10:59 PM ----------
al.rale said:
Wow thank you! Im downloading it right now at 2.2 mb/s, compared with 100 kb/s of sammobile.
I tried anything and nothing works, I think that the unique solution is try with another OWA roms, I don't know if Telcel and Claro SIM's have similar identifiers and thats why returns me to Claro. Don't you know if there are roms with the csc menu activated?
Click to expand...
Click to collapse
What firmware you already try?
ALUCARD4DEAD said:
As far I know to get VoLTE on telcel you need to buy phone directly with them, because uses the imei to enable that function
Click to expand...
Click to collapse
Yes, I thought so too, but the thing is I went to Telcel and asked and the told me that my phone SHOULD have VoLTE but I think that may be associated with my phone number, (since I've had that number for a long time), and not with the IMEI