Interop Unlocks (and other unlocking) and Insider builds updating? - Windows 10 Mobile

Hey guys. I wanna asj something. I know I'm already late to the part and still very new to the Interop unlocking (and other such unlockings) but I already Interop, Cap unlock and jailbreak my phone. But I'm still being careful and know what I'm doing and the repercussions and consequences of the actions I already did. Now after I did all these things, I haven't updated my phone with the latest Insider build yet (yes I'm on WIP, pretty much like any of us here), now I wanna ask?
Does newer WIP or updates gonna harm/undo all my tweaks, registries, and unlocks? Does after every update, do I need to redo somethings that are reverted by the updates? Could updates harm my phone with all these unlockings and tweaks after it update?
I would love a reply and help. Thanks

Should be fine. I currently have my 640 on latest insider build (15063 ->>) with continuum hack-enabled, dynamic page file scaling and interop unlock functioning normally. The updates didn't break any of them but anything can happen out of nowhere so be careful.

worst case it will revert whatever changes you made, its unlikely you will get in a bootloop or something because of whatever tweaks you made, each major build overwrites the current build after creating a backup of it in the recovery partition, after that it then gets user files and settings from the backup to the new working build, that is when something can go wrong, a previous tweak for example could be asking for a certain file to be used that the new build doesn't have, so after a reboot it shows a BSOD, because of a missing file that it supposed was mission critical

EspHack2 said:
worst case it will revert whatever changes you made, its unlikely you will get in a bootloop or something because of whatever tweaks you made, each major build overwrites the current build after creating a backup of it in the recovery partition, after that it then gets user files and settings from the backup to the new working build, that is when something can go wrong, a previous tweak for example could be asking for a certain file to be used that the new build doesn't have, so after a reboot it shows a BSOD, because of a missing file that it supposed was mission critical
Click to expand...
Click to collapse
Hey thanks for y'all replying. So what could I do? List all the tweaks I've made and unlocks I did? And what should I do when I did get on that situation? Is hard reset is the only way out after that?

PrinceKicksters said:
Hey thanks for y'all replying. So what could I do? List all the tweaks I've made and unlocks I did? And what should I do when I did get on that situation? Is hard reset is the only way out after that?
Click to expand...
Click to collapse
you could wait for people with disposable phones to inform of the situation, chances are they applied all known tweaks and mods so if their phones keep working after RS2 RTM goes to release preview, yours will too
there are things that cant be undone, an example was my 928 that got some files corrupted so I could no longer install-update apps and the registry was locked, as in, not keeping changes after reboots, including interop unlocking so it was a dead end, there's no dism in mobile to fix this, so yea hard reset is the only fix

EspHack2 said:
you could wait for people with disposable phones to inform of the situation, chances are they applied all known tweaks and mods so if their phones keep working after RS2 RTM goes to release preview, yours will too
there are things that cant be undone, an example was my 928 that got some files corrupted so I could no longer install-update apps and the registry was locked, as in, not keeping changes after reboots, including interop unlocking so it was a dead end, there's no dism in mobile to fix this, so yea hard reset is the only fix
Click to expand...
Click to collapse
OMG, I think I'm actually experiencing your 928 issue rn, I'm just only interop unlocked like only for a week rn, and now after had some of tweaking, now I can't update nor install apps from Windows Store, Windows Update also stucked on Initializing too and I can't install latest Fast build, but just today I've noticed that it actually download (I think?) and got passed 50% and still stucked there rn. Can you confirm that we're same on issue? Is hard reset reset really the fix here? How about the WDRT? Is it the same with hard reset?
Also I want to note that my PC too have this issue too, and yea I asked this on MS Answers and they did suggest DISM, but I can't really finished or start properly a DISM with an ISO or ESD. Here's the thread if mind to see it. So what i did is to do a in place upgrade repair, it did work and update apps for like a week, and two, now we're back again and I can't install, update apps from Windows Store, nor Windows Update too. Tho some installs after a very long time, and for only very small apps. I noticed that the netsvcs.exe process from wuaserv (Windows Update service) doesn't respond time to time, and just fades away and end itself even if the downloading isn't finished yet. I still don't know whats wrong with the service nor the Microsoft too. My 830 never experienced this before, updates and downloads are much smoother responsive than on my PC, until now they're on the both state
Also what happened to your 928, you said it does have this issue, why don't you hard reset it?

PrinceKicksters said:
OMG, I think I'm actually experiencing your 928 issue rn, I'm just only interop unlocked like only for a week rn, and now after had some of tweaking, now I can't update nor install apps from Windows Store, Windows Update also stucked on Initializing too and I can't install latest Fast build, but just today I've noticed that it actually download (I think?) and got passed 50% and still stucked there rn. Can you confirm that we're same on issue? Is hard reset reset really the fix here? How about the WDRT? Is it the same with hard reset?
Also I want to note that my PC too have this issue too, and yea I asked this on MS Answers and they did suggest DISM, but I can't really finished or start properly a DISM with an ISO or ESD. Here's the thread if mind to see it. So what i did is to do a in place upgrade repair, it did work and update apps for like a week, and two, now we're back again and I can't install, update apps from Windows Store, nor Windows Update too. Tho some installs after a very long time, and for only very small apps. I noticed that the netsvcs.exe process from wuaserv (Windows Update service) doesn't respond time to time, and just fades away and end itself even if the downloading isn't finished yet. I still don't know whats wrong with the service nor the Microsoft too. My 830 never experienced this before, updates and downloads are much smoother responsive than on my PC, until now they're on the both state
Also what happened to your 928, you said it does have this issue, why don't you hard reset it?
Click to expand...
Click to collapse
I did hard reset it after all, its just that I dont use it too often nowadays
in your case if you can still make registry changes and they dont revert after a reboot, then its not the same issue, I see you're downloading from cellular, maybe it has something to do with that
hard reset and WDRT is almost the same thing, WDRT just flashes the rom essentially making a clean install, like reformatting a disk and installing windows on pc, hard reset does that but it installs from a recovery partition and it contains a "fresh" image of the last OS installed, so it can contain bugs acquired from the last working state, its just very unlikely anyway
just make sure everything is backed up and do a hard reset, then login to your account while setting it up and it will show a list of the backups, get the latest one you made and it will be back where you left it(almost)

Related

I'm an idiot and I got some crazy malware. Help please.

OK so I smashed my s5, am a UDP verizon guy and hooked on the open bootloader, so i searched far and wide for another one with the 15 chipset...which I didn't find but I found a note 4 with it.
I bought it and unlocked it and loaded on a rom I loved. (5.0.1 og5). Well...no sense lying here...I was trying to do some less than kosher things regarding my ex's Facebook account with it. In the process I wasn't smart enough to cross check MD5s (a precaution I learned all too well) and opened an app that has me baffled.
It basically hijacked admin on my device completely. No Antivirus program can touch it, though many detect it. "Unknown sources" in my security folder is stuck permanently enabled, and I can't take over as admin on my own brand new note4.
I have tried flashing twrp and titanium backups to no avail, and also tried the safe stock og5 firmware through Odin but it never completes. I am stuck. I have logcat records and all the tools I would think might help, but I can't get rid of it...it seems to have used root and embedded itself into every facet of the device.
I am willing and ready to do anything including a full unroot and stock rom, I just don't want a locked update. Can anyone help me please?
As of now, no roms break it, only the stubborn malware CM app tries to get rid of it, but only identifies it as "suspicious file". My user admin and unknown sources are both locked, and a gaggle of bizarre log events happen constantly, forcing my device into crazy lag. As soon as it happened I received a couple random number-link blank text messages, but I never opened them. I don't have the numbers saved as I've flashed the phone like 30 times since trying to rid myself of this. Aside from the lag and locked unknown sources and admin, and an inability to clear trusted credentials, the phone seems to run normally, though I am scared to use it to log on to pretty much anything. The malware didn't come from a text, but from an app that I knowingly permitted thinking it was something else and I feel like a moron for it. It doesn't seem to have a name. It installed as an untitled app and I couldn't delete it with the root system app deleter, because it put a green bar over the check box in the app. I got rid of it with titanium, but to no avail. It still lurks.
Thanks in advance, and let me know of any screens hits or logs or tests I can provide to help.
At that point, I would recommend using Samsung's Smart Switch for PC program to do an emergency firmware upgrade & initialization. This will download a full copy of the stock firmware for the device (including a few bits that you won't find in stock firmwares available for download through sites like SamMobile) and will erase everything on the device and restore your phone to stock firmware.
If you are in the US and have a Best Buy nearby, you can see if one of their Samsung reps can perform a factory recovery using their SMART tool (which will do the same thing that Smart Switch's emergency firmware initialization will). Officially, rooted devices are not supported and they may rightfully refuse to do this, but it's worth asking if you don't have a computer to use for Smart Switch or don't want to wait.
You will need to redo the developer conversion, but that's the only thing I can think of that will definitely completely restore your phone to stock and eliminate all traces of whatever you installed.
thanks. that solved my problem and got it back to stock, rid of the malware completely. unfortunately, when i tried to return to the rom i had used, everything fell apart for me :/.

Pixel XL - HUGE data usage NOT rooted

Hey all,
I've done heaps of searching here and the wider web but only found reference to rooted phones failing to take updates.
I can't get a screenshot on here right now as I'm at work so no wifibut:
- Android OS _______________3.04GB :silly:
- Chrome__________________434MB
- Google Services ___________24.13MB
- etc
When I read about the failed update I checked in there and sure enough I have a 2017-5 patches system update sitting there failed, when I retry it it will download successfully then do step 1/2 of the installation then fail.
So it seems this would be the problem but the phone is definitely NOT rooted, any ideas??
thanks
You speak in codes, man. Could you explain your issue simpler? Right now I see an Android OS usage of 3.04GB. That seems abnormally large times 10. No one should have that, really. So it seems like your Android OS process downloaded multiple copies of system updates in error. Is that your problem?
Your post is still largely incomprehensible, so I won't make a final conclusion.
These are just suggestions:
1) If your phone is downloading system updates over and over, just damn update so it stops, or factory reset your phone.
2) If this is some kind of a rogue app, you are literally funked. Good luck trouble shooting it.
In any case, GL!
Yes, android OS used 3.04GB in ~5 days, my best guess is it was due to repeated attempts at '2017-5 patches system update'
Sorry, when I did a search I got heap of references to rooted phones having this issue so I guess I just talked from that reference point? It seemed to be a known issue but for rooted phones.
I just wanted to be clear that my issue matched those symptoms but was not rooted.
1) I've tried a manual update (many times) fails at the same point, I assume this is what is causing the data usage, as mentioned above.
2) Pretty sure it's not a rogue app
I'll try a factory reset, it's only a couple of weeks old (warranty replacement) so I hadn't really thought to reset straight away.
The phone doesn't necessarily need to be rooted to fail the update. A previously rooted phone can also fail to update as described, but typically that would mean an unlocked bootloader. I would have figured that the phone would have been reimaged and the bootloader locked on a refurbished phone, but maybe that doesn't happen. Is the bootloader unlocked? If so you could image the phone yourself to see if that works to fix it. If the bootloader is locked and a reset doesn't work, then I figure you might need to contact support about getting a different phone.
https://developers.google.com/android/images
I think you've gotten good information from everyone so far but just to add some clarity.
I had this exact same issue and was not rooted but did have an unlocked bootloader.
A factory reset did not resolve it. At the time I had issues, there were questions about rooting the stock images so I flashed PureNexus and have never looked back or had the issue again. Also, Verizon did add data to my plan and credit my account for the additional charges to negate the cost. Hope this helps!
It sounds like an issue with your phone that Pixel support might be able to help you with but they will certainly suggest a factory reset so you should do that first. Since you have a refurbished phone you don't know how the previous owner was using it and its possible a modification he made is still on the phone and causing you problems. If the failed system update isn't actually causing the excess data usage it could also be a carrier issue. I know some Project Fi users had that problem and it was related to the service. Google gave people credit for the excess data. You could also have an app that is interfering with the update so a factory reset should definitely be your first step and I'm guessing it's fairly likely to fix your problem.

Note 4 Help After Update

So, here's the basics:
AT&T Note 4, Official. Never had issues, never needed to root...
Build MMB29M.N910AUCS2EQF1
June 1, 2017 Security Patch Update
6.0.1
All updates have always come OTA.
Here's the issue:
When the MAY security update come out, I updated like I always do. Since then, my phone started locking up, randomly rebooting, all around pissing me off
I read about having Samsung Experience in Best Buy reapply the update, but our Best Buy no longer has Samsung.
So I went to AT&T to see if they had capacity to do it, nope; just a moron sales-boy who was clueless, just wanted me to pay $225 for my deductible and get an S8 (maybe if they offered the + I might have).
Went to a third party mobile repair and they quoted $35 up front but didn't guarantee they'd be able to 'find the update cause they're in China' (true story).
I've uninstalled apps and reinstalled systematically trying to find a culprit (to no avail).
Tried using Kies and Smart Switch and they both error when I enter the model and serial.
I did a factory reset from recovery and wiped caches, but the problem persisted.
So I installed Wake Lock (darken) and that seemed to tide it and 'cure' the problem.
June security update come out and I installed it. I had to remove and re-seat batteries, restart, pray to my fictitious gods and finally it got to the green App Optimizing and finished.
I removed the wake lock but the problems persisted; so I reinstalled it and that's currently where I am...
I have close to 20 years with computers, but am total n00b with Android.
I see there are the security updates here and downloaded the May and June.
At this point, would applying back to the May update have the possibility of helping even though I've now installed the June?
If so, how? I read you copy it to the root of an SD Card and apply update through the recovery screen, is this correct?
Should I factory reset/wipe caches before re-applying the update?
If I need to re-image the phone (another possible fix I read), what file do I need to use to go about doing that?
At this point, I'd like to A) limp by til the Note 8 comes out and B) get this back up and running so my kids can inherit it for their games when I get the 8...
Any help or direction would be greatly appreciated.
(Just noticed this might be more appropriate in the Help section. Mods, please feel free to move this to the correct sub-section. I can't find a way to delete the post and repost it there...)

PSA: Bricking my phone with Fortnite(good educational story and cry for help)

So yesterday, the beta for Fortnite on android came out and I obviously signed up immediately. I selected my device, signed up, and downloaded the installer which would not open. I did not do any research, but assumed that the problem had to do with xposed. I disabled xposed and sure enough, the installer opened, but now it said that my device was not compatible. After some research, i saw that the beta was only going to be for samsung devices for about 30 days so, naturally, i tried to figure out a way to circumvent this restriction. I thought back to my early android days and my spoofing of devices with build.prop and decided to replace some of the entries such as "ro.build.vendor", "ro.build.model", etc. with those from the Galaxy S9. After a quick reboot, it actually worked to my surprise. I was clearly excited at this point and spent about 45 minutes on mobile data downloading Fortnite and then downloading the game files. Finally, the game was downloaded, i was signed into my account, and I was waiting to join a Lobby. After entering a lobby and dropping out of the bus, I was descending towards tomato town to test out my favorite game on my favorite device when suddenly the loading screen came back up(this is where my luck took a turn for the worst). I was returned to the main menu and given a message along the lines of "Fortnite cannot be played on devices that do not pass safetynet, have an unlocked bootloader, or are rooted... Attempting to bypass this check may result in permanent account ban" At this point I began to get annoyed and figure that since I had come all this way I would just keep going. I went and turned on magisk hide from the magisk manager and set it to hide xposed. I then used the option to reinstall magisk under a different package name. I continued to enable exposed again and enable x privacy(I was planning on attempting to do exactly what i had been warned against by Fortnite). I then rebooted and... well, didn't reboot. I got stuck on the green RAZER circle for a bit then the screen just went black. After a few reboots i decided to restore my build.prop through TWRP. This didn't help at all so I decided to clear the cache and dalvik(this didnt work). At this point i decided to back up my photos and the Fortnite apk to my sd card and do a reset through TWRP. The reset did nothing so i figured I would try installing a custom ROM. I downloaded and installed resurrection remix. On the first boot i was greeted with the storage decryption prompt. I entered my password and it said that it was successfully decrypted but was corrupt and i had to factory reset. I pressed the button and the device went to the RAZER logo then turned off. I tried another boot tand the same thing happened so I went to TWRP manually and did yet another reset..... it failed. This is where i panicked. I went through twrp and did a bunch of **** like try to fix contexts and repair data until finally something succeeded and I was able to wipe data. From there I again booted into resurrection remix where it just hung on the boot gif. I plugged the phone into my pc and ran "adb logcat" and it said something about missing files in vendor. I then remembered that I had the RAZER factory images downloaded. I tried the flashall.bat and that just hung on the first command that was only supposed to push 44kb. I knew I had severely fluckled up at this point so seing as there was nothing else to lose I went back into twrp and tried to flash Resurrection again. After that succeeded and i pressed reboot on TWRP I was warned that no system image was installed. Remembering about the vendor thing from before, I pulled the stock vendor image and installed it through TWRP. I was going to flash all the images manually. I was unaware that flashing to vendor would remove TWRP so afte ra unwanted reboot, TWRP was gone for good. Since then, I have tried numerous things in download mode and am always met with messages such as "write failed {no error}", "a/b permissions not supported", "bootloader update required", and many moooore.
At this point I feel that all hope is lost but I feel that I have learned a valuable lesson and can be used as a perfect example of why you should think before you act. I would like to still ask for help from peers who are most likely infinitely more knowledgeable than I am. If you feel that you can help contribute to saving my baby(RAZER phone) in any way or you feel that this helped you in some way, don't hesitate to reply to this thread.
Thank you all for reading to this point and thank you in advance for any insight you have to offer.
Firstly, may I empathize with your pain, and I do need to say..."whooops". Maybe this can only be repaired from a RMA to Razer themselves. I'm not someone who roots his Android devices as I prefer them "as is" but I am a major Linux user and faff with those OSes till I break them. maybe contact Razer with the issue, maybe they can help. And again.....you have my sympathys.
Yeah, I'm going to wait a few days and see if either I can figure anything out or someone else can help me, but after that I will probably contact them. I just hope this doesn't end up being an expensive repair if it comes to sending an RMA. Thanks for your sympathy btw ???
I hate to say this, but today I finally got Fortnite installed and ready for use, totally officially, from epic games, and I'm now awaiting my email with my login access...yes, you may kick me, I will accept a virtual kick.
See, this hurts, it really does. I’m not going to virtually kick you though. I like to be kept in the loop on developments like this. ?
Just to make sure...did you try installing the stock image?
Why don't you just flash a fastboot image from MR1?
https://s3.amazonaws.com/cheryl-factory-images/cheryl-o-global-5038.zip
Yes I tried. That was the first thing I did when things started going south for the winter but it did not do anything. It kept giving the errors that i spoke of such as "unknown command" or "failed(no error)".
So without coming here first. I got my Fortnite invite, went through the install, jumped out of the bus and ...... then received the, you can't be rooted error message. #EPICfail
I haven't done anything else yet except close Fortnite. I'm now afraid to reboot for fear of ending up in the same position as @ShaneRagans. And I really feel like Epic Games should have announced that rooted phones wouldn't be compatible. Kinda pissed about it really.
lostnsound said:
So without coming here first. I got my Fortnite invite, went through the install, jumped out of the bus and ...... then received the, you can't be rooted error message. #EPICfail
I haven't done anything else yet except close Fortnite. I'm now afraid to reboot for fear of ending up in the same position as @ShaneRagans. And I really feel like Epic Games should have announced that rooted phones wouldn't be compatible. Kinda pissed about it really.
Click to expand...
Click to collapse
Did you do everything else the OP did, like changing build.prop? Or were you able to just install and attempt to play then it shut you out?
I received that same error message, but I'm not rooted, it seems the beta hasn't been properly coded to see changes in device status and architecture as ok. I also believe that epic games have bypassed the Google play store as they cannot guarantee the stability of the app and it would be seen by Google play store as defective. Maybe its something we need to wait for them to get fixed. Remember this is a "beta" version and is still in development.
lostnsound said:
So without coming here first. I got my Fortnite invite, went through the install, jumped out of the bus and ...... then received the, you can't be rooted error message. #EPICfail
I haven't done anything else yet except close Fortnite. I'm now afraid to reboot for fear of ending up in the same position as @ShaneRagans. And I really feel like Epic Games should have announced that rooted phones wouldn't be compatible. Kinda pissed about it really.
Click to expand...
Click to collapse
As long as you did not edit anything within your system, you should be fine. The game itself did not brick my phone, I bricked my phone because I was careless. I do however agree 100% that there should have been some sort of prior notice that rooted phones would not be compatible because it would have given me some time to do proper research on returning to stock before hand.
ShaneRagans said:
So yesterday, the beta for Fortnite on android came out and I obviously signed up immediately. I selected my device, signed up, and downloaded the installer which would not open. I did not do any research, but assumed that the problem had to do with xposed. I disabled xposed and sure enough, the installer opened, but now it said that my device was not compatible. After some research, i saw that the beta was only going to be for samsung devices for about 30 days so, naturally, i tried to figure out a way to circumvent this restriction. I thought back to my early android days and my spoofing of devices with build.prop and decided to replace some of the entries such as "ro.build.vendor", "ro.build.model", etc. with those from the Galaxy S9. After a quick reboot, it actually worked to my surprise. I was clearly excited at this point and spent about 45 minutes on mobile data downloading Fortnite and then downloading the game files. Finally, the game was downloaded, i was signed into my account, and I was waiting to join a Lobby. After entering a lobby and dropping out of the bus, I was descending towards tomato town to test out my favorite game on my favorite device when suddenly the loading screen came back up(this is where my luck took a turn for the worst). I was returned to the main menu and given a message along the lines of "Fortnite cannot be played on devices that do not pass safetynet, have an unlocked bootloader, or are rooted... Attempting to bypass this check may result in permanent account ban" At this point I began to get annoyed and figure that since I had come all this way I would just keep going. I went and turned on magisk hide from the magisk manager and set it to hide xposed. I then used the option to reinstall magisk under a different package name. I continued to enable exposed again and enable x privacy(I was planning on attempting to do exactly what i had been warned against by Fortnite). I then rebooted and... well, didn't reboot. I got stuck on the green RAZER circle for a bit then the screen just went black. After a few reboots i decided to restore my build.prop through TWRP. This didn't help at all so I decided to clear the cache and dalvik(this didnt work). At this point i decided to back up my photos and the Fortnite apk to my sd card and do a reset through TWRP. The reset did nothing so i figured I would try installing a custom ROM. I downloaded and installed resurrection remix. On the first boot i was greeted with the storage decryption prompt. I entered my password and it said that it was successfully decrypted but was corrupt and i had to factory reset. I pressed the button and the device went to the RAZER logo then turned off. I tried another boot tand the same thing happened so I went to TWRP manually and did yet another reset..... it failed. This is where i panicked. I went through twrp and did a bunch of **** like try to fix contexts and repair data until finally something succeeded and I was able to wipe data. From there I again booted into resurrection remix where it just hung on the boot gif. I plugged the phone into my pc and ran "adb logcat" and it said something about missing files in vendor. I then remembered that I had the RAZER factory images downloaded. I tried the flashall.bat and that just hung on the first command that was only supposed to push 44kb. I knew I had severely fluckled up at this point so seing as there was nothing else to lose I went back into twrp and tried to flash Resurrection again. After that succeeded and i pressed reboot on TWRP I was warned that no system image was installed. Remembering about the vendor thing from before, I pulled the stock vendor image and installed it through TWRP. I was going to flash all the images manually. I was unaware that flashing to vendor would remove TWRP so afte ra unwanted reboot, TWRP was gone for good. Since then, I have tried numerous things in download mode and am always met with messages such as "write failed {no error}", "a/b permissions not supported", "bootloader update required", and many moooore.
At this point I feel that all hope is lost but I feel that I have learned a valuable lesson and can be used as a perfect example of why you should think before you act. I would like to still ask for help from peers who are most likely infinitely more knowledgeable than I am. If you feel that you can help contribute to saving my baby(RAZER phone) in any way or you feel that this helped you in some way, don't hesitate to reply to this thread.
Thank you all for reading to this point and thank you in advance for any insight you have to offer.
Click to expand...
Click to collapse
I feel your pain i locked me bootloader and bricked my phone crying atm
(bootloader) Verity mode: true
(bootloader) Device unlocked: false
(bootloader) Device critical unlocked: true
(bootloader) Charger screen enabled: true
i tried many thing as well but if your bootloader is unlocked try use the 7.1.1 ver and add -i 0x1532 to the command
btw anyone wanna buy a paper for lol
Do any of you guys that bricked your phones happen to have 3 rescue?
It costs £100 but you'll get a new phone next day no questions asked.
I did this when I bricked my Samsung galaxy S6 edge+ last year.
It's expensive, but surely better than having a £500 paper weight.
Just wanted to let everyone know that Razer repaired it for $15.

constant "Bluetooth keeps stopping"

I just started receiving the error "Bluetooth keeps stopping" on my Pixel 3 XL a week ago. It comes and goes seemingly completely at random, sometimes clicking close app will work and other times it will just keep coming back over and over until I restart my phone. It's a huge problem because it takes my wifi and sometimes I think even my mobile data down with it. I've read a bunch of posts and it seems like many people have been having this issue.
I've tried turning off Wi-fi and Bluetooth scanning.
updating Google Play system update.
Clearing cache and storage of Bluetooth.
resetting every bluetooth device I own
Factory Reset
sideloading an OTA image
Flashing a factory image
I'm all out of ideas. The only thing I can come up with is it's a hardware issue, but generally hardware issues I run into are not so sporadic and random. Usually it's either broke, or not broke. It doesn't seem to correlate to how hot the phone gets. I feel like Google broke something with an Android update. I've tried to warranty it through Google but I purchased it new on Ebay and they want the original purchasers name, email and order number. Anyone know of a way around that for Google's warranty?
As a last ditch effort I just flashed the Sep 18th Android 9 factory image, crossing my fingers that for some reason that does something.
My only other idea is google has driver binaries posted for pixel devices. Do these binaries get written over/rolled back when the factory image is flashed? Or are they isolated and not touched when flashing a factory image? Could flashing new driver binaries fix the problem? If so, does anyone have a guide on how to flash the driver binaries, google gives documentation for sideloading the OTA or flashing factory images, but nothing for how to install the driver binaries.
iwestfall7062 said:
I just started receiving the error "Bluetooth keeps stopping" on my Pixel 3 XL a week ago. It comes and goes seemingly completely at random, sometimes clicking close app will work and other times it will just keep coming back over and over until I restart my phone. It's a huge problem because it takes my wifi and sometimes I think even my mobile data down with it. I've read a bunch of posts and it seems like many people have been having this issue.
I've tried turning off Wi-fi and Bluetooth scanning.
updating Google Play system update.
Clearing cache and storage of Bluetooth.
resetting every bluetooth device I own
Factory Reset
sideloading an OTA image
Flashing a factory image
I'm all out of ideas. The only thing I can come up with is it's a hardware issue, but generally hardware issues I run into are not so sporadic and random. Usually it's either broke, or not broke. It doesn't seem to correlate to how hot the phone gets. I feel like Google broke something with an Android update. I've tried to warranty it through Google but I purchased it new on Ebay and they want the original purchasers name, email and order number. Anyone know of a way around that for Google's warranty?
As a last ditch effort I just flashed the Sep 18th Android 9 factory image, crossing my fingers that for some reason that does something.
My only other idea is google has driver binaries posted for pixel devices. Do these binaries get written over/rolled back when the factory image is flashed? Or are they isolated and not touched when flashing a factory image? Could flashing new driver binaries fix the problem? If so, does anyone have a guide on how to flash the driver binaries, google gives documentation for sideloading the OTA or flashing factory images, but nothing for how to install the driver binaries.
Click to expand...
Click to collapse
Try flashing the dec/Jan build then lock bootloader then start phone as normal setup then unlock bootloader. There's also some Bluetooth settings in the developer ootions. Also check battery settings for the app maybe try turning off optizmation for it. There's also a setting somewhere that will let you turn off the ble236a scan it's always on mine new pair list. But the drivers are usually flash with the update or ota. I needed to flash those when flashing Dirty Unicorns. Fastboot flash vendor_a vendor.img and same for vendor_b believe the other is the radio img you would need to extract them with 7zip if using Windows.
Mine did this as well but I was using naptime,and servicly to kill and or deep sleep quicker. Which is what made me think of the battery optizmation
billyt1 said:
Try flashing the dec/Jan build then lock bootloader then start phone as normal setup then unlock bootloader. There's also some Bluetooth settings in the developer ootions. Also check battery settings for the app maybe try turning off optizmation for it. There's also a setting somewhere that will let you turn off the ble236a scan it's always on mine new pair list. But the drivers are usually flash with the update or ota. I needed to flash those when flashing Dirty Unicorns. Fastboot flash vendor_a vendor.img and same for vendor_b believe the other is the radio img you would need to extract them with 7zip if using Windows.
Mine did this as well but I was using naptime,and servicly to kill and or deep sleep quicker. Which is what made me think of the battery optizmation
Click to expand...
Click to collapse
Just a precaution, as soon as you start locking and unlocking bootloader you're going to be doing a complete wipe of your device. So backup before hand. You'll also want to do a complete install of the factory image, with the wipe option, before you attempt to lock the bootloader. If you lock the bootloader and you are not 100% stock of something goes wrong you could end up with an expensive paper weight.
billyt1 said:
Try flashing the dec/Jan build then lock bootloader then start phone as normal setup then unlock bootloader. There's also some Bluetooth settings in the developer ootions. Also check battery settings for the app maybe try turning off optizmation for it. There's also a setting somewhere that will let you turn off the ble236a scan it's always on mine new pair list. But the drivers are usually flash with the update or ota. I needed to flash those when flashing Dirty Unicorns. Fastboot flash vendor_a vendor.img and same for vendor_b believe the other is the radio img you would need to extract them with 7zip if using Windows.
Mine did this as well but I was using naptime,and servicly to kill and or deep sleep quicker. Which is what made me think of the battery optizmation
Click to expand...
Click to collapse
The error happened once immediately after a full factory image flash before I had downloaded a single program or changed a single setting, so I don't see how it could be bluetooth settings, battery optimization, wifi/bluetooth scanning, or a rogue app. Oddly enough, since posting this last night I've managed to go 12 hours without an errors after flashing the Sept 2018 factory image. buuuuuuuut now I'm afraid to upgrade to Android 10 again.
jd1639 said:
Just a precaution, as soon as you start locking and unlocking bootloader you're going to be doing a complete wipe of your device. So backup before hand. You'll also want to do a complete install of the factory image, with the wipe option, before you attempt to lock the bootloader. If you lock the bootloader and you are not 100% stock of something goes wrong you could end up with an expensive paper weight.
Click to expand...
Click to collapse
Thank you for making sure I understood this. Yeah, I generally factory reset my phone and laptop once a year so I always back everything up before a reset. And yeah, I haven't changed anything from stock on this phone since I've had it, so unlocking and locking the bootloader should never cause any issues. As I told Billy, the Sept 2018 image seems to have fixed the problem, fingers crossed.
Is it probable that upgrading once again to Android 10 will cause the issue to return? The Sept 2018 image must have changed an internal setting or driver that wasn't functioning properly.
iwestfall7062 said:
Is it probable that upgrading once again to Android 10 will cause the issue to return? The Sept 2018 image must have changed an internal setting or driver that wasn't functioning properly.
Click to expand...
Click to collapse
I can't tell you for sure, but i would think the latest firmware should work. There have been a number of Bluetooth fixes since the original firmware, which it appears you're on now. That, and lots of security fixes.
jd1639 said:
I can't tell you for sure, but i would think the latest firmware should work. There have been a number of Bluetooth fixes since the original firmware, which it appears you're on now. That, and lots of security fixes.
Click to expand...
Click to collapse
Yeah, I mean I would much prefer being on Android 10 and having the latest updates, I normally update as soon as they come out. But, given that I flashed the Jan 2020 image and bluetooth was still broken, and then flashed the Sep 2018 which seems to have fixed it, I'm hesitant to go back to the Jan 2020 updates. Kind of tending towards the if it isn't broken, don't fix it philosophy right now. If I had time to monkey around with my phone all the time I wouldn't mind, but the semester just started and I use my phone for everything at school so I don't really have time for it to be not working. >.< Such an odd issue and odd fix.
Looks hardware related, like the cable is loose.
wangdaning said:
Looks hardware related, like the cable is loose.
Click to expand...
Click to collapse
And it's continuing to happen even with the Sept 2018 factory image flash.
Why do you think it's hardware related and that a cable is loose when a reboot fixes it? If the cable is loose a reboot shouldn't fix it.
iwestfall7062 said:
And it's continuing to happen even with the Sept 2018 factory image flash.
Why do you think it's hardware related and that a cable is loose when a reboot fixes it? If the cable is loose a reboot shouldn't fix it.
Click to expand...
Click to collapse
What do you have Bluetooth connected to when it happens?
jd1639 said:
What do you have Bluetooth connected to when it happens?
Click to expand...
Click to collapse
Nothing. It doesn't matter whether anything is connected or not. It literally happened on first boot up of a fresh flashed Jan 2020 factory image, before I had put a single thing on the phone.
Generally I have my Fitbit Versa connected, I got 2 tiles awhile ago, but first troubleshooting thing I did was remove the app and delete those from bluetooth since those were my latest additions to bluetooth. I have backbeat fit headphones I use sometimes, the same with bose soundlink ii headphones, ps4 controllers, a jbl pulse 3, my car radio. But I factory restored all of those items so they weren't trying to connect to my phone, and then flashed the factory image. So I don't see how it has anything to do with an actual bluetooth connection.
Im having this same exact issue. Android 9 was always super smooth. It all started with the Android 10 update. I was having all kinds of Radio related (wifi/bluetooth/data) issues ever since. I noticed sometime in Nov/Dec that google released some kind of radio system app update and things got a little better. But I still have the Bluetooth problem (like today, which prompted me to find this thread) or every once in a while ill lose all data connectivity and have to reboot my phone for everything to come back. I LOVE the dark theme, but this has to be the worst Android update from a stability standpoint ive ever experienced.
Just want you to know it isnt just you. Its something to do with some phones on Android 10
JJT211 said:
Im having this same exact issue. Android 9 was always super smooth. It all started with the Android 10 update. I was having all kinds of Radio related (wifi/bluetooth/data) issues ever since. I noticed sometime in Nov/Dec that google released some kind of radio system app update and things got a little better. But I still have the Bluetooth problem (like today, which prompted me to find this thread) or every once in a while ill lose all data connectivity and have to reboot my phone for everything to come back. I LOVE the dark theme, but this has to be the worst Android update from a stability standpoint ive ever experienced.
Just want you to know it isnt just you. Its something to do with some phones on Android 10
Click to expand...
Click to collapse
Yeah, I wish this thread held a solution for you. I've searched and searched and tried every solution I've found on google and nothing has worked, and really none of the threads I have found have ever had a concrete solution either, just one or two people going "well I did THIS and it worked", and a bunch of people saying it didn't work for them. I just cannot fathom how a full factory flash back to the very first image would not revert the changes that came with Android 10. That's why I was questioning whether or not a factory flash replaces driver binaries. It's the only way I could see the factory flash to Sept 2018 not fixing our issue. (Other than it really being a hardware issue, but that doesn't seem possible to me.)
Oh wow, you're still having same issues on Android 9??
Im still on Android 10, most recent update. I did do a full factory flash a few weeks ago and it was quite the improvement. But I still do have the Bluetooth/radio issue every once in a while, like yesterday.
I wonder if it's a hardware issue and/or substandard hardware performance that Android 10 made more prevalent? That's something we'll probably never know
I only pointed to hardware as I had a similar issue years ago. The radio connections were slightly loose so it would come and go. I do hope you are able to figure out what is wrong, was not trying to be rude.
wangdaning said:
I only pointed to hardware as I had a similar issue years ago. The radio connections were slightly loose so it would come and go. I do hope you are able to figure out what is wrong, was not trying to be rude.
Click to expand...
Click to collapse
Oh no, I didn't think for a second you were being rude. And I appreciate your idea, just with what I'm experiencing with my specific phone it doesn't seem to be a hardware issue.
Strangely enough, the issue has been tapering off as of late, after the factory resets I just continued to use my phone while I wait to figure out if I can get a refund or a warranty replacement, etc. The issue has been occurring with much less frequency since then. Still happens, but not like it was.
Damn, the Bluetooth bug is back again. It was so bad the other day, my phone kept bootlooping for like 20 mins while I was on the road.
I finally just let phone sit for a while and it fixed itself. Man this is completely sporadic.
JJT211 said:
Damn, the Bluetooth bug is back again. It was so bad the other day, my phone kept bootlooping for like 20 mins while I was on the road.
I finally just let phone sit for a while and it fixed itself. Man this is completely sporadic.
Click to expand...
Click to collapse
Yeah, mines been better for like 4 days, and then it just crashed and rebooted by itself earlier today.
has anyone gotten to the bottom of this yet? it seems to be a result of the play store system update being "stuck" on Sept 1st...even if you get it to download to the current version, currently March 1st, after a reboot it will not show the March update has been applied. And should it actually show that the March update has been applies, within a day the phone will reboot and the bluetooth bug will return, strangely the update to the play store system reverts to Sept 1st.
I'm having this issue with my son's phone. I tried unlocking the bootloader and flashing the factory img from April but of course the bug is still there, and after signing in the Play Store system is of course dated Sept 1st
There is no fix. I made an official Android Issue Tracker thread.
https://issuetracker.google.com/issues/151033055
and a Google Pixel Phone Help thread.
https://support.google.com/pixelphone/thread/32828289?hl=en
Google's being ****ty about it. I eventually just bought a new Pixel 4 XL. I needed a functional phone for school and work, and as much as I hate to spend money on another Google product after this mess, they do make the most powerful pure android phones with the best camera. Ebay FTW, $600, never giving them another penny directly.
If you still have warranty, get it warrantied immediately, and don't take no for an answer. I dawdled around thinking it would get fixed and even though I reported that I was having issues with it directly to Google's phone support BEFORE the warranty expired, by the time I called a second time and pushed a manager to see if they could warranty it, my warranty had expired so they told me to go jump in a lake.
to make it worse, Google told me the phone still has an extended warranty but I'm not the original owner and have no way to contact that individual. But you need that person's email address for it to work. So it was purchased but because of this technicality it's null and void. I get the security of it but it's still garbage

Categories

Resources