Hi, I have an unlocked H815-EUR that bootlooped last summer under warranty. I sent it for repair and got it back in August. Since then, I didn't received any update. I'm on v20g-EUR-XX, and when I check if an update is available, the message says "not yet updated". Now, I wonder if they locked the updates as part of the repair, because before the bootloop issue, I was receiving updates regularly. I also tried with LG bridge but no updates available...
Chris
Envoyé de mon LG-H815 en utilisant Tapatalk
When ill remember right, there is no new version for the EUR.
But just backup a full dump before unlock bootloader and you are good to go
pOpY
chris_Leb said:
Hi, I have an unlocked H815-EUR that bootlooped last summer under warranty. I sent it for repair and got it back in August. Since then, I didn't received any update. I'm on v20g-EUR-XX, and when I check if an update is available, the message says "not yet updated". Now, I wonder if they locked the updates as part of the repair, because before the bootloop issue, I was receiving updates regularly. I also tried with LG bridge but no updates available...
Chris
Envoyé de mon LG-H815 en utilisant Tapatalk
Click to expand...
Click to collapse
I wouldn't say we're locked out of the updates, but something 'smells'. My original g4 (h815) bootlooped and MB was replaced. It came with 20g software, and as I was not happy with battery , I downgraded to 20d. Now when I check for updates it says I'm using the latest version. Latest my a**. I know I got updated from 20d to 20e on my original g4.
chris_Leb said:
Hi, I have an unlocked H815-EUR that bootlooped last summer under warranty. I sent it for repair and got it back in August. Since then, I didn't received any update. I'm on v20g-EUR-XX, and when I check if an update is available, the message says "not yet updated". Now, I wonder if they locked the updates as part of the repair, because before the bootloop issue, I was receiving updates regularly. I also tried with LG bridge but no updates available...
Chris
Envoyé de mon LG-H815 en utilisant Tapatalk
Click to expand...
Click to collapse
Lol im sorry. Ure about the first person ive seen get there phone back from lg and want updates. Everyone else is mad because lg updated there phone and wants to downgrade.
We'll, actually I don't mind getting the security updates. And if ever LG deliver Nougat, I would consider upgrading... Provided early adopters confirm it's a good release ?.
Envoyé de mon LG-H815 en utilisant Tapatalk
Related
Since Asus pulled the files off the web site, here they are. Use these files at your own risk. I'm not responsible for bricked devices, nuclear wars or spilled milk.
Since the .29/.26 firmware is available on the ASUS site, http://www.asus.com/Tablet/Transformer_Pad/ASUS_Transformer_Pad_TF300T/#download, I see no need to host those. The .17 is whats needed for root but only if you do NOT want to unlock your device.
US Files:
.17 https://docs.google.com/open?id=0B1ReSMcHudEDODl3SlZaVldoVms
DE Files:
.17 https://docs.google.com/open?id=0B1ReSMcHudEDcVpCbGVCM0dDREk
WW users can use this to downgrade, root, but root isn't sticking for most people when they take the OTA to .26 and .29. Thanks to mr.niceguy76 for finding this file.
DE Convert to WW File:
https://docs.google.com/open?id=0B1ReSMcHudEDRzJZd2ctN3hWVFU
DE only-Use this first then use WW file.
Please note that if you manually update to .26/.29 you will lose root.
US and WW,
To downgrade from .26/.29 to .17 use method 2 in the guide found here. Make sure to thank wolf849.
http://forum.xda-developers.com/showthread.php?t=1622628
For users that choose to unlock and install a custom recovery, the above information is obsolete. You now have the ability to flash the blob from ASUS (the second zip file in the download) "not the actual blob itself" in recovery and then flash the root package. This is much more convenient but voids your warranty.
Anyone got the german (DE) .17 file?
Lyshalia said:
Anyone got the german (DE) .17 file?
Click to expand...
Click to collapse
i dont have them but i can tell u from experience that you can use the the US one the only thing that will be different are the standard apps and the version number
Sorry for the noob question but how do we manually update with the blob file?
I've been trying to pull the OTA update for a week with no luck.
It took me some time to find out, too.
http://support.asus.com/Download.aspx?SLanguage=en&m=ASUS+Transformer+Pad+TF300T&p=20&s=16
Check the "Manuals" there
Hi BierLiebHaber,
Did you used US blob for downgrade and root?
I thought from a test, that with a US blob there is no OTA working?
Using the DE .17 blob, gives me headaches because OTA wipes my VooDoo RootKeeper backup :-(
Sofar I found no way to root.
Cheers
Peter
Does anybody have the WW .17 file? I do not want to convert to US.
I'm uploading WW .26 and TW .26 files. I will post as soon as they are done. According to Asus, DE will use the the WW file. There is a convert file on the Asus website. I still don't have WW/TW .17 files.
Has anyone from outside of the US managed to root their device and apply the OTA update?
RolloJarvis said:
Has anyone from outside of the US managed to root their device and apply the OTA update?
Click to expand...
Click to collapse
well, I did ota to. 26 when I got the tablet.
then I downgraded to. 17 with us blob.
I got my root and didn't do a update to. 26
but am on .26 without ota nor manually update and have no idea how I got on. .26
I still had all my apps installed and setting after downgrade.
I also used the tweaks and oc and now I have sometimes flickering over my screen, even if oc is off.
didn't had it before I rooted thou.
my tablet is us now but I want it ww again.
if I read on Asus support site it isn't possible to downgrade to. .17 ww if your on. .27 us or am I wrong?
Valorster said:
well, I did ota to. 26 when I got the tablet.
then I downgraded to. 17 with us blob.
I got my root and didn't do a update to. 26
but am on .26 without ota nor manually update and have no idea how I got on. .26
I still had all my apps installed and setting after downgrade.
I also used the tweaks and oc and now I have sometimes flickering over my screen, even if oc is off.
didn't had it before I rooted thou.
my tablet is us now but I want it ww again.
if I read on Asus support site it isn't possible to downgrade to. .17 ww if your on. .27 us or am I wrong?
Click to expand...
Click to collapse
If you can find the .17WW file you should be able to downgrade.
wideopn11 said:
If you can find the .17WW file you should be able to downgrade.
Click to expand...
Click to collapse
gonna call them Monday and demand them to put it on the website lol
or I'll tell them I kick them out the pcshop I work
and send all Asus devices back with message "doa"
who knows it can work
Ok so I know this is a noob question but I just ordered my tf300t and what is the difference between all these files
Sent from my Galaxy Nexus using xda premium
tucci999 said:
Ok so I know this is a noob question but I just ordered my tf300t and what is the difference between all these files
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
There are specific firmwares for specific regions, for example US for North America, UK for the United Kingdom, etc.
RolloJarvis said:
Has anyone from outside of the US managed to root their device and apply the OTA update?
Click to expand...
Click to collapse
Hi,
I have not heard from any DE user till now, to keep Root after OTA back to .26.
That mean that:
* downgrade with DE .17 worked (Wolf method 2)
* root SparkyRoot worked, protect root with Voodoo RootKeeper too
* OTA back to WW.26 (maybe that switch is special DE users?) after "Check update"
But in the end, no su-backup availble to restore Root with RootKeeper.
I'm interested if there are any "out of US" success stories, too!
cheers
(=PA=)
spex66 said:
Hi BierLiebHaber,
Did you used US blob for downgrade and root?
I thought from a test, that with a US blob there is no OTA working?
Using the DE .17 blob, gives me headaches because OTA wipes my VooDoo RootKeeper backup :-(
Sofar I found no way to root.
Cheers
Peter
Click to expand...
Click to collapse
yeah i dont get the ota update but i didnt get it on the .17 DE file either... (thats why i changed to US hopeing to get the OTA)
spex66 said:
I have not heard from any DE user till now, to keep Root after OTA back to .26.
Click to expand...
Click to collapse
Same here, rootkeeper did not keep my root after upgrading from DE.17 to DE.26
There is a new DE .26 file available from ASUS:
http://support.asus.de/download/download.aspx?SLanguage=de-de
Special upgrade file which is required for TF300T DE version units upgrade to WW version.
DE region’s users from now on are able to use the same firmware with WW version so we will no longer provide DE version firmware update file.
Click to expand...
Click to collapse
Lyshalia said:
There is a new DE .26 file available from ASUS:
http://support.asus.de/download/download.aspx?SLanguage=de-de
Click to expand...
Click to collapse
this is not new. The update transforms your pad to WW version.
BlackICE said:
this is not new. The update transforms your pad to WW version.
Click to expand...
Click to collapse
The file is on the ASUS-Servers since today, it has a different filesize than the first DE.26 file and it includes the WW transformation (not tested yet). So I define it as "new"
I received a update from about 180mb and the descripiton said it would improve google apps. And overall phone experience.
As i am rooted and already on v10c eur. I cant install the update.
Where can i find the downloaded update?
PS. It could be an old update because i reverted to v10a with TWRP.
But on that backup i never had that upate.
*justintime* said:
I received a update from about 180mb and the descripiton said it would improve google apps. And overall phone experience.
As i am rooted and already on v10c eur. I cant install the update.
Where can i find the downloaded update?
PS. It could be an old update because i reverted to v10a with TWRP.
But on that backup i never had that upate.
Click to expand...
Click to collapse
I just got my phone a few days ago, and as soon as I opened it I had a 180mb update. It was the June 22 or 23 update.
Checked it... And yes... False alarm it was the 10b update
Verstuurd vanaf mijn LG-H815 met Tapatalk
Hey guys i was wondering how to fix the charging on a n9300?
Where is that charging block located in? Kernel, System?
And is there a fix for the N9300 at all? All the roms are for N930F or N930FD only.. =(
zroice said:
Hey guys i was wondering how to fix the charging on a n9300?
Where is that charging block located in? Kernel, System?
And is there a fix for the N9300 at all? All the roms are for N930F or N930FD only.. =(
Click to expand...
Click to collapse
Hi. Yes it's located in the kernel. You need to flash a custom kernel with twrp for your note 7 variant...
Envoyé de mon SM-G935F en utilisant Tapatalk
benyou54 said:
Hi. Yes it's located in the kernel. You need to flash a custom kernel with twrp for your note 7 variant...
Envoyé de mon SM-G935F en utilisant Tapatalk
Click to expand...
Click to collapse
Are there any "fixed" kernels for the N9300 (TGY) variant? Otherwise ill have to try downgrade to older odin firmware and then disable OTA - but a custom kernel would be safer and better I guess.
zroice said:
Are there any "fixed" kernels for the N9300 (TGY) variant? Otherwise ill have to try downgrade to older odin firmware and then disable OTA - but a custom kernel would be safer and better I guess.
Click to expand...
Click to collapse
If you get 60% update you can downgrade to 100%. If you get the 30% and less update, you can't downgrade anymore...
Envoyé de mon SM-G935F en utilisant Tapatalk
benyou54 said:
If you get 60% update you can downgrade to 100%. If you get the 30% and less update, you can't downgrade anymore...
Envoyé de mon SM-G935F en utilisant Tapatalk
Click to expand...
Click to collapse
ok, damn i think its the 10% update.. any idea if there is a way to get this back to charging?
Maybe downgrade through TWRP?
zroice said:
ok, damn i think its the 10% update.. any idea if there is a way to get this back to charging?
Maybe downgrade through TWRP?
Click to expand...
Click to collapse
Yes you need to flash a custom kernel based on 100% kernel or flash the original 100% kernel with twrp. Maybe you need to extract it from 100% firmware. I don't know how but it's the solution. Good luck
Envoyé de mon SM-G935F en utilisant Tapatalk
fml **** doesnt take twrp anymore.. says i have to unlock it but i alrdy did.. guess its blocking odin =(
flashing the boot.img directly (in a tar archive) doesnt work either.. fuuuck
EDIT:
...... ahh my bad didnt read about that crom service crap. got twrp installed now!
EDIT2:
flashed old boot.img but **** is blocked .. aka doesnt boot - sigh such a pain in the ass
zroice said:
fml **** doesnt take twrp anymore.. says i have to unlock it but i alrdy did.. guess its blocking odin =(
flashing the boot.img directly (in a tar archive) doesnt work either.. fuuuck
Click to expand...
Click to collapse
Odin won't work anymore with you. Downgrade is blocked by Samsung. The only way you have it's installing from twrp...
Envoyé de mon SM-G935F en utilisant Tapatalk
benyou54 said:
Odin won't work anymore with you. Downgrade is blocked by Samsung. The only way you have it's installing from twrp...
Envoyé de mon SM-G935F en utilisant Tapatalk
Click to expand...
Click to collapse
yea i flashed it through twrp but its bootloader blocked apparently..
I found some chinese custom rom for the thing but its downloading with like 10kb/sec .. so next week ill know if that works.. =)
the story continues... now i have a chinese custom rom on the n9300 and its charging and all.. but gapps dont work =/
They were not preinstalled and i flashed the latest version for 6.0.1 and arm64 from opengapps.org, but somethings not going right. Google play services crash occasionally and after sign in i get booted out of the play store to reauthenticate. Im guessing there is some block in the chinese roms .. =/
So my only hope now is to flash a hongkong version again (which would return everything to stock.. means doin it all over again and take the kernel from that custom rom - with that the charging works at least. The older kernel from the old stock odin version didnt boot as I said.
Or any ideas on how to get the gapps running? Tried removing the play services in hopes that the store would just load it after setting up but then the store doesnt even open anymore =/...
Endless story this heh.
hi @zroice, did you manage to make this work? I am exactly in the same situation that you have been in, would really appreciate your help.
zroice said:
the story continues... now i have a chinese custom rom on the n9300 and its charging and all.. but gapps dont work =/
They were not preinstalled and i flashed the latest version for 6.0.1 and arm64 from opengapps.org, but somethings not going right. Google play services crash occasionally and after sign in i get booted out of the play store to reauthenticate. Im guessing there is some block in the chinese roms .. =/
So my only hope now is to flash a hongkong version again (which would return everything to stock.. means doin it all over again and take the kernel from that custom rom - with that the charging works at least. The older kernel from the old stock odin version didnt boot as I said.
Or any ideas on how to get the gapps running? Tried removing the play services in hopes that the store would just load it after setting up but then the store doesnt even open anymore =/...
Endless story this heh.
Click to expand...
Click to collapse
fak1r said:
hi @zroice, did you manage to make this work? I am exactly in the same situation that you have been in, would really appreciate your help.
Click to expand...
Click to collapse
Install the hongkong version, that comes with google play. If you cannot charge then you need to try to downgrade.
If you cannot downgrade with odin because its blocked then you need to download aurora chinese custom rom for n9300 (google is your friend for that) and extract the kernel (boot.img).
Unlock bootloader, flash twrp and then that kernel from the aurora rom (through twrp image flashing on boot partition).
If your device then does not boot into the system anymore because "you are using an old kernel" or something then you need to extract the system.img.ext4 of an older hongkong odin rom version and copy that onto the phone space.
With "simg2img" you can convert that system.img.ext4 to system.img in adb shell terminal and then as final step flash that with "dd" onto your system partition (should be sda21 iirc). then it should boot and charge when you get the right system and kernel combination.
Its not trivial so pls understand that if you cannot follow these steps or dont understand then you better shouldnt do it, or find some android expert to do it.
PS: If you dont need google play or wanna try to get that running on the chinese version (also has all languages, but no google and some chinese crapware) you can just try and flash that aurora custom rom for n9300.
Here's the link to the chinese custom rom for n9300 with fixed kernel:
http://bbs.gfan.com/android-8383463-1-1.html
Unfortunately you need to make an account at that site to be able to download - chrome with instant translation helps alot with this.
zroice said:
Here's the link to the chinese custom rom for n9300 with fixed kernel:
http://bbs.gfan.com/android-8383463-1-1.html
Unfortunately you need to make an account at that site to be able to download - chrome with instant translation helps alot with this.
Click to expand...
Click to collapse
Hello can you provide rom link? I cannot acces chinese content
I have a semi-bricked N9300 dual sim from Hongkong (TGY).
No matter which firmware I try odin always fails with that dreaded "check sw rev failed" - aka the rom is not the right one apparently.
I tried the latest firmware available at samsung-firmware.net (or something) from 10th of october 2016 - but I think there was an even newer firmware installed on this thing.
TWRP is still working - so if theres a way to "downgrade" with TWRP by flashing partitions directly with DD that would work also I guess.
Please help - I tried to flash a modem part only (CP) and since then the phone is in a bootloop. Before I had it running and charging fine (combination of hongkong system partition and a customized chinese kernel which had the charging block disabled).
--
Is there any way to figure out which software/firmware is actually installed?
getprop tells me [ro.bootloader]: [N9300ZHU3BQB1]
but the latest firmware available online at samsung-firmware.net is N9300ZHU2BPJ4 version.
That's what I found
http://webcache.googleusercontent.c...F%D8%B1%D9%81%D8%AA+&cd=1&hl=fr&ct=clnk&gl=fr
Envoyé de mon SM-G935F en utilisant Tapatalk
benyou54 said:
That's what I found
http://webcache.googleusercontent.c...F%D8%B1%D9%81%D8%AA+&cd=1&hl=fr&ct=clnk&gl=fr
Envoyé de mon SM-G935F en utilisant Tapatalk
Click to expand...
Click to collapse
thanks alot for your help!
alrdy found that myself but that one doesnt let you download unfortunately =(
I am trying to contact that person who uploaded it directly in hopes he still has it.
hello any updates?
Anyone get this as an OTA? I was just going to install the sprint SPR-G975USQU1ASC8 Odin file when i noticed this newer firmware on firmware.science. G975USQU1ASD3
Information about your update
This firmware will update your S10+
from version G975USQU1ASBA
to version G975USQU1ASD3.
The file size is approximately 536.1 MB and the firmware was found on April 3, 2019.
This firmware is only for sprint? I wonder if they fix the connection issue sprint user are experiencing
HtcOnekid said:
This firmware is only for sprint? I wonder if they fix the connection issue sprint user are experiencing
Click to expand...
Click to collapse
There is a full Odin of sprint SC8 out and there's an uodate on Firmware science that is not carrier specific that updates SBA to SD3. Pretty sure the SC8 Odin can be installed for any carrier, just dont use the userdata unless you are on sprint. I'm installing the SD3 now.
This made a HUGE improvement on fingerprints. I deleted all my saved and when i re-did them it registered every touch with very little pressure for 4 fingers. (I do two for each thumb) I maybe got 3 errors saying press harder the whole setup. When unlocking it unlocked 10 out of 10 times and quicker than before.
Works perfect on verizon model. Thanks!
Sent from my SM-G975U using Tapatalk
Works great on ATT model, with tmobile firmware flashed.
Yes. Its not carrier specific. Works great!
Sent from my SM-G975U using Tapatalk
installed on my Sprint model, works great
So this won't work for unlocked u1?
Did this help the data issues for those on Sprint? I'm unlocked on Sprint service searching for a way to fix my issues since Sammy hasn't sent out the update yet but Sprint has.
johnwayne27 said:
Yes. Its not carrier specific. Works great!
Sent from my SM-G975U using Tapatalk
Click to expand...
Click to collapse
Does it wipe your device? or just continues as is after the update?
nugzo said:
Anyone get this as an OTA? I was just going to install the sprint SPR-G975USQU1ASC8 Odin file when i noticed this newer firmware on firmware.science. G975USQU1ASD3
Information about your update
This firmware will update your S10+
from version G975USQU1ASBA
to version G975USQU1ASD3.
The file size is approximately 536.1 MB and the firmware was found on April 3, 2019.
Click to expand...
Click to collapse
Does this work for factory unlocked? And any confirmation that its helping with signal? Using Unlocked S10+ w/ ATT and it constantly drops data although it shows I have full signal.
My Verizon version just got this OTA today.
Sent from my SM-G975U using Tapatalk
rizzo269 said:
My Verizon version just got this OTA today.
Click to expand...
Click to collapse
nice, thanks for sharing. Were you on SBA?
nugzo said:
nice, thanks for sharing. Were you on SBA?
Click to expand...
Click to collapse
Yup
Sent from my SM-G975U using Tapatalk
Those of you that flashed on verizon, when you go into the "system update" does it show the ASBA update and "Applied March 18, 2019''? I flashed the ASD3 and it shows that under the Software Information where build number, kernel version etc is.
Gilley said:
Those of you that flashed on verizon, when you go into the "system update" does it show the ASBA update and "Applied March 18, 2019''? I flashed the ASD3 and it shows that under the Software Information where build number, kernel version etc is.
Click to expand...
Click to collapse
Mine says applied April 8 which is the day the OTA update installed.
Sent from my SM-G975U using Tapatalk
rizzo269 said:
Mine says applied April 8 which is the day the OTA update installed.
Click to expand...
Click to collapse
Yeah I swear mine said it on Sunday when I did it. But it's not anymore. Not sure what changed
Will this work on unlocked on Version s10+?
bturkel said:
Will this work on unlocked on Version s10+?
Click to expand...
Click to collapse
I attempted to install on my unlocked S10+, and it was unsuccessful.