Hey guys i was wondering how to fix the charging on a n9300?
Where is that charging block located in? Kernel, System?
And is there a fix for the N9300 at all? All the roms are for N930F or N930FD only.. =(
zroice said:
Hey guys i was wondering how to fix the charging on a n9300?
Where is that charging block located in? Kernel, System?
And is there a fix for the N9300 at all? All the roms are for N930F or N930FD only.. =(
Click to expand...
Click to collapse
Hi. Yes it's located in the kernel. You need to flash a custom kernel with twrp for your note 7 variant...
Envoyé de mon SM-G935F en utilisant Tapatalk
benyou54 said:
Hi. Yes it's located in the kernel. You need to flash a custom kernel with twrp for your note 7 variant...
Envoyé de mon SM-G935F en utilisant Tapatalk
Click to expand...
Click to collapse
Are there any "fixed" kernels for the N9300 (TGY) variant? Otherwise ill have to try downgrade to older odin firmware and then disable OTA - but a custom kernel would be safer and better I guess.
zroice said:
Are there any "fixed" kernels for the N9300 (TGY) variant? Otherwise ill have to try downgrade to older odin firmware and then disable OTA - but a custom kernel would be safer and better I guess.
Click to expand...
Click to collapse
If you get 60% update you can downgrade to 100%. If you get the 30% and less update, you can't downgrade anymore...
Envoyé de mon SM-G935F en utilisant Tapatalk
benyou54 said:
If you get 60% update you can downgrade to 100%. If you get the 30% and less update, you can't downgrade anymore...
Envoyé de mon SM-G935F en utilisant Tapatalk
Click to expand...
Click to collapse
ok, damn i think its the 10% update.. any idea if there is a way to get this back to charging?
Maybe downgrade through TWRP?
zroice said:
ok, damn i think its the 10% update.. any idea if there is a way to get this back to charging?
Maybe downgrade through TWRP?
Click to expand...
Click to collapse
Yes you need to flash a custom kernel based on 100% kernel or flash the original 100% kernel with twrp. Maybe you need to extract it from 100% firmware. I don't know how but it's the solution. Good luck
Envoyé de mon SM-G935F en utilisant Tapatalk
fml **** doesnt take twrp anymore.. says i have to unlock it but i alrdy did.. guess its blocking odin =(
flashing the boot.img directly (in a tar archive) doesnt work either.. fuuuck
EDIT:
...... ahh my bad didnt read about that crom service crap. got twrp installed now!
EDIT2:
flashed old boot.img but **** is blocked .. aka doesnt boot - sigh such a pain in the ass
zroice said:
fml **** doesnt take twrp anymore.. says i have to unlock it but i alrdy did.. guess its blocking odin =(
flashing the boot.img directly (in a tar archive) doesnt work either.. fuuuck
Click to expand...
Click to collapse
Odin won't work anymore with you. Downgrade is blocked by Samsung. The only way you have it's installing from twrp...
Envoyé de mon SM-G935F en utilisant Tapatalk
benyou54 said:
Odin won't work anymore with you. Downgrade is blocked by Samsung. The only way you have it's installing from twrp...
Envoyé de mon SM-G935F en utilisant Tapatalk
Click to expand...
Click to collapse
yea i flashed it through twrp but its bootloader blocked apparently..
I found some chinese custom rom for the thing but its downloading with like 10kb/sec .. so next week ill know if that works.. =)
the story continues... now i have a chinese custom rom on the n9300 and its charging and all.. but gapps dont work =/
They were not preinstalled and i flashed the latest version for 6.0.1 and arm64 from opengapps.org, but somethings not going right. Google play services crash occasionally and after sign in i get booted out of the play store to reauthenticate. Im guessing there is some block in the chinese roms .. =/
So my only hope now is to flash a hongkong version again (which would return everything to stock.. means doin it all over again and take the kernel from that custom rom - with that the charging works at least. The older kernel from the old stock odin version didnt boot as I said.
Or any ideas on how to get the gapps running? Tried removing the play services in hopes that the store would just load it after setting up but then the store doesnt even open anymore =/...
Endless story this heh.
hi @zroice, did you manage to make this work? I am exactly in the same situation that you have been in, would really appreciate your help.
zroice said:
the story continues... now i have a chinese custom rom on the n9300 and its charging and all.. but gapps dont work =/
They were not preinstalled and i flashed the latest version for 6.0.1 and arm64 from opengapps.org, but somethings not going right. Google play services crash occasionally and after sign in i get booted out of the play store to reauthenticate. Im guessing there is some block in the chinese roms .. =/
So my only hope now is to flash a hongkong version again (which would return everything to stock.. means doin it all over again and take the kernel from that custom rom - with that the charging works at least. The older kernel from the old stock odin version didnt boot as I said.
Or any ideas on how to get the gapps running? Tried removing the play services in hopes that the store would just load it after setting up but then the store doesnt even open anymore =/...
Endless story this heh.
Click to expand...
Click to collapse
fak1r said:
hi @zroice, did you manage to make this work? I am exactly in the same situation that you have been in, would really appreciate your help.
Click to expand...
Click to collapse
Install the hongkong version, that comes with google play. If you cannot charge then you need to try to downgrade.
If you cannot downgrade with odin because its blocked then you need to download aurora chinese custom rom for n9300 (google is your friend for that) and extract the kernel (boot.img).
Unlock bootloader, flash twrp and then that kernel from the aurora rom (through twrp image flashing on boot partition).
If your device then does not boot into the system anymore because "you are using an old kernel" or something then you need to extract the system.img.ext4 of an older hongkong odin rom version and copy that onto the phone space.
With "simg2img" you can convert that system.img.ext4 to system.img in adb shell terminal and then as final step flash that with "dd" onto your system partition (should be sda21 iirc). then it should boot and charge when you get the right system and kernel combination.
Its not trivial so pls understand that if you cannot follow these steps or dont understand then you better shouldnt do it, or find some android expert to do it.
PS: If you dont need google play or wanna try to get that running on the chinese version (also has all languages, but no google and some chinese crapware) you can just try and flash that aurora custom rom for n9300.
Here's the link to the chinese custom rom for n9300 with fixed kernel:
http://bbs.gfan.com/android-8383463-1-1.html
Unfortunately you need to make an account at that site to be able to download - chrome with instant translation helps alot with this.
zroice said:
Here's the link to the chinese custom rom for n9300 with fixed kernel:
http://bbs.gfan.com/android-8383463-1-1.html
Unfortunately you need to make an account at that site to be able to download - chrome with instant translation helps alot with this.
Click to expand...
Click to collapse
Hello can you provide rom link? I cannot acces chinese content
Related
Has anyone figured out how to make a i8160P still a P after returning to stock GB. Any time I've tried to flash the original firmware the phone remains a regular i8160 and states that a custom power management has been installed. The NFC works but the device has no IMEI and insists at boot and in the device menu it is an i8160.
I don't think it is possible after you have flashed i8160 firmware
I've tried various different things but to no avail. It is a shame about my impatience. Especially considering the Germany i8160P, which is the one I have, has gotten the Jelly Bean update first. :silly:
Stevk said:
I've tried various different things but to no avail. It is a shame about my impatience. Especially considering the Germany i8160P, which is the one I have, has gotten the Jelly Bean update first. :silly:
Click to expand...
Click to collapse
Use I8160P GB SER ( include Pit File, ussualy) and then back to stock Germany GB for I8160P, and flash the new one...
If it doesn't work...
Go to your Samsung Service Center..
Sent from my GT-I8160 using xda app-developers app
WahyuGo said:
Use I8160P GB SER ( include Pit File, ussualy) and then back to stock Germany GB for I8160P, and flash the new one...
If it doesn't work...
Go to your Samsung Service Center..
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
Sadly that first step doesn't work. It throws up the Custom Power Management Error and you loose your IMEI. Samsung won't deal with it since the device was not available in my region.
WahyuGo said:
Use I8160P GB SER ( include Pit File, ussualy) and then back to stock Germany GB for I8160P, and flash the new one...
Click to expand...
Click to collapse
As far as I know the is no SER (RUS) version of 8160P available only 8160...
Tried this also with the RUS 8160 GB to get back 8160P. But didn't work....
Why someone want to return to GB?
Sent from my GT-I8160P using xda app-developers app
hy,
please follow this link: http://www.ibtimes.co.uk/articles/4...ndroid412-jellybean-downgrade-gingerbread.htm
1 - install the firmware I8160XXLK6 rev00
2 - install the last firmware before updated to jelly bean for your model
3 - reset your phone
b0g said:
hy,
please follow this link: http://www.ibtimes.co.uk/articles/4...ndroid412-jellybean-downgrade-gingerbread.htm
1 - install the firmware I8160XXLK6 rev00
2 - install the last firmware before updated to jelly bean for your model
3 - reset your phone
Click to expand...
Click to collapse
This does not apply for 8160P (Ace 2 with NFC)... best case, you will have to flash back to MB2/MB4/MC8... mid case no modem/IMEI (no NFC, 3G, etc.)... worst case: brick! Do NOT attempt if you have 8160P!
I tried this, to regain NFC and to be able to flash JB ME1, but when trying to flash GB for 8160P over the Russian rom I got custom modem. Immediatly flashed back to MB2, stuck there now (MC8 is horrible!)
Shadowcareful said:
Why someone want to return to GB?
Sent from my GT-I8160P using xda app-developers app
Click to expand...
Click to collapse
I don't want to return to GB. I want to have a working I8160P with Jellybean firmware.
b0g said:
hy,
please follow this link: http://www.ibtimes.co.uk/articles/4...ndroid412-jellybean-downgrade-gingerbread.htm
1 - install the firmware I8160XXLK6 rev00
2 - install the last firmware before updated to jelly bean for your model
3 - reset your phone
Click to expand...
Click to collapse
I'll give this alternative method a go.
Stevk said:
I'll give this alternative method a go.
Click to expand...
Click to collapse
If you manage to install GB for 8160P w/o losing your IMEI, tell me how you did it... but probably you will encounter CUSTOM MODEM errors when flashing original 8160P fw (after having flashed SER for 8160)
You need a complete firmware.
The problem its I8160XXMB4. This Firmware include Bootloader, new memory management, ipl...
Once you have instaled mb4, your phone will be a "true" i8160 until you can flash a complete i8160p firmware, and in this moment, i believe that dont exit any complet i860p firmware, so You can still update your ace with any i8160 uptade, but not more i8160p, until some new "complete packaged" will be leak of course.
Could someone with a P that hasn't been flashed update a full firmware dump?
Should be "easy".
You need a i8160p rooted and some linux knowledge
The "only" problems are:
1º. You need to know the path to block files, normally they are in /dev/block
2º. You need to suppose that block are each partition (system, userdata, sdcard, modem, bootloader, sbl, cache...)
3º. You need a SD card with enough free space
Once you have all, should be "easy" dump each partition:
dd if=/dev/block/blockxxx of=/sdcard/bootloader.raw
dd if=/dev/block/blockxxy of=/sdcard/system.raw
...
where blockxxx should be each block device
But even when you can obtain all partitions and you can identify them, you still need create a firmware with them or flash some of them on other devices, with the correspondence risk and privacy problem form the dump owner... well, the owner could of course delete userdata, sdcard, efs... partitions
@primewell
You say MC8 is horrible because of the 482mb ram? Its just the official version... Whats so different and horrible between MC8 and MB2/MB4...
Sent from my GT-I9100 using xda app-developers app
teddytsen said:
@primewell
You say MC8 is horrible because of the 482mb ram? Its just the official version... Whats so different and horrible between MC8 and MB2/MB4...
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I had it with 6xx MB ram... but I wanted an unbranded fw. Would love italian job, but e.g. the SMS app from android 4.2 sucks on the small screen, and some other things. Or does smb have the whole ME1 stock apps? Then I could flash them to MC8 italian job
Theliels said:
You need a complete firmware.
The problem its I8160XXMB4. This Firmware include Bootloader, new memory management, ipl...
Once you have instaled mb4, your phone will be a "true" i8160 until you can flash a complete i8160p firmware, and in this moment, i believe that dont exit any complet i860p firmware, so You can still update your ace with any i8160 uptade, but not more i8160p, until some new "complete packaged" will be leak of course.
Click to expand...
Click to collapse
Isn`t there any chance get the P orginal files back !?
maybe a full dump of an unflashed P ?
noone can help us !?
matthias1976 said:
Isn`t there any chance get the P orginal files back !?
maybe a full dump of an unflashed P ?
noone can help us !?
Click to expand...
Click to collapse
That seems like the only way to be honest. Thats what I had to do to my 'L' variant.
NZ John said:
That seems like the only way to be honest. Thats what I had to do to my 'L' variant.
Click to expand...
Click to collapse
Did u got succes with it !!
matthias1976 said:
Isn`t there any chance get the P orginal files back !?
maybe a full dump of an unflashed P ?
noone can help us !?
Click to expand...
Click to collapse
Exactly - thats the problem - We are still missing such an complete Bump of an 8160P, which was Stock GB....
We have this only eith this 8160 russian version ...
Hello me again
Every one here in the Group Got confused to have a stock based rom zip
Some lost their loaders. and not booting
So here i had created a small zip file that includes Recovery, Pre-root.
Just single flash and you no need to flash any other zip or any other flashtool to recover
C6902:- click here to Download
C6903:- Click here to Download
Compact :- soon
XDA:DevDB Information
[5.0+][Stock lollipop][Direct from KK]Pre-rooted_recovery_single file flash stock zip, ROM for the Sony Xperia Z1
Contributors
venkat kamesh
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Stable Release Date: 2015-04-18
Created 2015-04-18
Last Updated 2015-04-24
How to install
Download the Zip
copy to sd
get into recovery
make full wipe
Flash the zip and reboot
have fun with no risk
Hi venkat,
Thank you for your work. I am currently on lolipop stock firmware. I lost my root due to update. Is there anyway to root my lollipop without going back to kitkat ?
I am very eager to try Your ROM but I dont have root and recovery.
Any method dealing with small size files would be fine. I have 512kbps connection
Thank you in advance
Waiting for 603 thanks
Enviado do meu Elephone P5000
ferreinf said:
Waiting for 603 thanks
Enviado do meu Elephone P5000
Click to expand...
Click to collapse
when?
thegreeat said:
Hi venkat,
Thank you for your work. I am currently on lolipop stock firmware. I lost my root due to update. Is there anyway to root my lollipop without going back to kitkat ?
I am very eager to try Your ROM but I dont have root and recovery.
Any method dealing with small size files would be fine. I have 512kbps connection
Thank you in advance
Click to expand...
Click to collapse
2 options for you...
1 Go back to kitkat root the phone install recovery.. And than reboot.. After that install pre PRE ROOTED lollipop.
2 Unlock the bootloader Than reboot.. Flash Trinity or Rockz kernel.. Than you have recovery and flash pre rooted lollipop zip....
In option 2 you wont loose data.. Provided if you have unlocked bootloader earlier and than relocked....
Thank You !!!
darsh11192 said:
2 options for you...
1 Go back to kitkat root the phone install recovery.. And than reboot.. After that install pre PRE ROOTED lollipop.
2 Unlock the bootloader Than reboot.. Flash Trinity or Rockz kernel.. Than you have recovery and flash pre rooted lollipop zip....
In option 2 you wont loose data.. Provided if you have unlocked bootloader earlier and than relocked....
Click to expand...
Click to collapse
Thank you so much. :good: I love option 2.
I did this before your reply.....
Gone back to Jelly bean. Rooted and installed recovery. Haven't unlocked the bootloader. And flashed the Pre rooted lollipop using recovery.
And working fine.
so now the prerequisites for this ROM will only be recovery and root. Not KitKat root.
Will download the updated ROM which is going to be released on Tuesday
Can you upload the files to google drive please Downloading for past 6 hours from mega and now it failed :crying: :crying:
I can resume the download on Google Drive with IDM . A humble request
No problems at all!
Amazing stock Rom. No fc. Flashed from stock kitkat. Everything working fine. It would be great if there were cool mods built in.
Patiently waiting for C6903 version..!
FCArsenal said:
Amazing stock Rom. No fc. Flashed from stock kitkat. Everything working fine. It would be great if there were cool mods built in.
Click to expand...
Click to collapse
For mods there is another thread for that.
Sent from my C6902
SD card needs to be mounted everytime
Hey guys. Rom boots correctly but SD card fails to mount.. I have to pull it out and put it back inside everytime I boot. Is there a solution for this. Just checking for information. I am gonna install the Rock z1 over the weekend.
For me everything will work greats.
Wysłane z mojej Z1 compact przy użyciu Tapatalk
venkat kamesh said:
C6903:- soon
Click to expand...
Click to collapse
I would like to ask if this still valid? should I wait?
robisrobis said:
I would like to ask if this still valid? should I wait?
Click to expand...
Click to collapse
its valid since that i had made the files but waiting for the net speed
nothing more
and also for z1 compact
I have stock lollipop with unlocked bootloader, but without any recovery. How can I flash it? Flashing via flashtool other kernel is safe? Or it may do bootloop or smthing like that?
Thx for reply!
You can flash in fastboot, kernel with dualrecovery and root.
venkat kamesh said:
its valid since that i had made the files but waiting for the net speed
nothing more
and also for z1 compact
Click to expand...
Click to collapse
When we can't see the c6903 version?...Any eta about your net speed?
fer2503 said:
When we can't see the c6903 version?...Any eta about your net speed?
Click to expand...
Click to collapse
upload started
venkat kamesh said:
upload started
Click to expand...
Click to collapse
Thanks a lot
Small OT: some news about kernel?
hi friend i have a i9195
international and i briked my phone i go to a repaire
shop and he solve my probleme but when i return at
home i see that the repair shop flash a (i9195 la fleur
edition at my s4 mini i9195 international) iam afraid
now if i flash a normal i9195 to my phone i afraid to
brick my phone any help can i returned to normal
stock rom and not the i9195 la fleur edition?? can i
flash now the cyanogenmod? or my phone stuck at la
fleur edition?????please help me
please someone answer to my question
I'm sure they use the same hardware. I'm sure searching these posts the last few days I've seen the same question and the answer was yes you can. But don't take my word on that...
RuffBuster said:
I'm sure they use the same hardware. I'm sure searching these posts the last few days I've seen the same question and the answer was yes you can. But don't take my word on that...
Click to expand...
Click to collapse
tnx for your great help....so i can I FLASH THE NORMAL ROM WITHOUT PROBLEME AND FLASH CYANOGENMod?
please friends help me iam afraid
znayver said:
please friends help me iam afraid
Click to expand...
Click to collapse
Hi mate, I had the same questions as you do but the news is good. The phone is yours and it is not locked out from anything so feel free to have a good look around and pick up as much info as possible - not because it is complicated really, just a matter of becoming aquainted with all the terms and techo speak! Feel free to ask cos loads of folk here are very expert :good:
znayver said:
please friends help me iam afraid
Click to expand...
Click to collapse
What is model number of "la fleur" or whatever edition of s4 mini ??
If it is I9195 then you can flash other I9195 firmwares onto your device.
Or if you want to be sure just ask that service guy to flash a normal firmware onto your device.
MarkAndroid.UK said:
Hi mate, I had the same questions as you do but the news is good. The phone is yours and it is not locked out from anything so feel free to have a good look around and pick up as much info as possible - not because it is complicated really, just a matter of becoming aquainted with all the terms and techo speak! Feel free to ask cos loads of folk here are very expert :good:
Click to expand...
Click to collapse
so my friend i can flash CWM AND CYANOGENMOD AT THIS ROM (VERSION LA FLEURE EDITION?) WITHOUT PROBLEME ?TEL ME YOU FLASH CYANOGENMOD OVER LA FLEURE EDITION?
sasank360 said:
What is model number of "la fleur" or whatever edition of s4 mini ??
If it is I9195 then you can flash other I9195 firmwares onto your device.
Or if you want to be sure just ask that service guy to flash a normal firmware onto your device.
Click to expand...
Click to collapse
hi friend i have s4 mini i9195 international the version who the repair shop flash to me is (la fleure edition (AP=I9195XXUCNK4 CP=I9195XXUCNK4 CSC=I9195QZXCOA1)
the question now can i flash custum rom like cyanogenmod over the (rom la fleure edition i9195)
znayver said:
the question now can i flash custum rom like cyanogenmod over the (rom la fleure edition i9195)
Click to expand...
Click to collapse
If model number of your device is I9195 then you can flash any custom rom meant for i9195 or serranoltexx
sasank360 said:
If model number of your device is I9195 then you can flash any custom rom meant for i9195 or serranoltexx
Click to expand...
Click to collapse
tnx mr @sasank360 you make me happy
Flash latest Cwm recovery then backup and cm12.1 should be fine.
Any way how do you bricked your phone the first time?
fburgos said:
Flash latest Cwm recovery then backup and cm12.1 should be fine.
Any way how do you bricked your phone the first time?
Click to expand...
Click to collapse
ouuuh welcome mr @fburgos i miss you men...tnx for your help...i dont know how i bricked my phone the first time i use ploiki rom ste rom up4 i decided to do a factory reset for my phone when i do that the phone be crazy and he reboot randomly after 15 sec of use...i do a factory reset twice and i choose reset system but after that its stuck at samsung logo...i try to debrick it but no succes i try flash via odin a stock rom but its stuck at get pit for mapping or setup connection i try pit file same probleme i try to reinstall kies and the driver and i use many port of usb i stopped kies no succes after that i decided to go to a repair shop and he solved the boot probleme
Here is a very interesting guide to install a custom multilanguage Rom (with root inside) and the Official Stock Rom (English/Chinese):
http://blog.grossoshop.net/leeco-x720-grossoshop-rom-italiano/
The guide is in Italian but you can easily translate with Google Translator!
It works without any problem...you can have all European major languages translations and Europe localization...no other significant changes.
Sent from my LEX720 using Tapatalk
and the root is inside!
LE_ZL1_LEX720-CN-5.8.017S.zip
stock (chines and english)
https://mega.nz/#!ykRkhbjL!D-7Z5eGmu...KJFoCw6y6DBbKQ
how flash-
How to install LeTv Stock ROMs:
Method 1: From File manager:
Step 1: Download the multilingual EUI ROM.
Step 2: Rename the zip file as update.zip, and copy it to the root directory of Internal storage.
Step 3: Open the “File Manager” and click the firmware “update.zip” to upgrade firmware. Click “Update”
Method 2: From Recovery:
Step 1: Copy firmware “update.zip” to the root directory of the SD card.
Step 2: Shutdown your device, Press the Volume+ key and the Power button at the same time, wait until the screen wakes ,it will enter into the upgrade mode.
Step 3: Finally, a picture, select the downloaded zip file. Wait for the upgrade is complete, reboot into the system.
cacimbo said:
LE_ZL1_LEX720-CN-5.8.017S.zip
stock (chines and english)
https://mega.nz/#!ykRkhbjL!D-7Z5eGmu...KJFoCw6y6DBbKQ
how flash-
How to install LeTv Stock ROMs:
Method 1: From File manager:
Step 1: Download the multilingual EUI ROM.
Step 2: Rename the zip file as update.zip, and copy it to the root directory of Internal storage.
Step 3: Open the “File Manager” and click the firmware “update.zip” to upgrade firmware. Click “Update”
Method 2: From Recovery:
Step 1: Copy firmware “update.zip” to the root directory of the SD card.
Step 2: Shutdown your device, Press the Volume+ key and the Power button at the same time, wait until the screen wakes ,it will enter into the upgrade mode.
Step 3: Finally, a picture, select the downloaded zip file. Wait for the upgrade is complete, reboot into the system.
Click to expand...
Click to collapse
Dude, we need the password for the mega link, please
TweetyPeety said:
Dude, we need the password for the mega link, please
Click to expand...
Click to collapse
https://mega.nz/#!ykRkhbjL!D-7Z5eGmuOEtCEVon8PoQ08Xt8csaKJFoCw6y6DBbKQ
its link with key
pgravili said:
and the root is inside!
Click to expand...
Click to collapse
Yes is already rooted
andy88de said:
It works without any problem...you can have all European major languages translations and Europe localization...no other significant changes.
Sent from my LEX720 using Tapatalk
Click to expand...
Click to collapse
can you tell me if having Greek language ?
No no Greek language...
Sent from my LEX720 using Tapatalk
Man im starting to get pissed
Any phone from LeEco did get the new firmware 18s, but ours.... WHAT IS UP???
Anbody able to contact LeEco to ask when there is a firmware up???
I just someone with a 19s firmware installed at delivery. WHERE can we get the firmware???
Are you sure? I know leeco Lepro 2 e le max 2 received 19s...not le pro 3...I'm not so worried about it. Leeco le pro 3 was launched only for the Chinese market and I'm pretty sure they are going to update it before the launch in India probably at Christmas time.
Sent from my LEX720 using Tapatalk
18s
http://bbs.ydss.cn/thread-700591-1-1.html
i have mine ' international version' le pro3. which has a custom rom i am pretty sure. it has EUI latest 019s installed. but it has bugs, the charging is very slow. the QC3.0 does not work at all.
samsungandriod said:
i have mine ' international version' le pro3. which has a custom rom i am pretty sure. it has EUI latest 019s installed. but it has bugs, the charging is very slow. the QC3.0 does not work at all.
Click to expand...
Click to collapse
Is it possible you make a system backup through twrp?
And upload it anywhere, if u do it don't forget do delete ur Google mail account. ^^
Would be awesome if it's possible.
I don't have twrp installed on the phone yet. As there bugs in the rom such as slow charging. I will wait for the update to come
Sent from my LeEco Pro3
cacimbo said:
18s
http://bbs.ydss.cn/thread-700591-1-1.html
Click to expand...
Click to collapse
Have you tried it...I'm on 17s and All seems to function well besides the camera OIS. The video are really shaky and the focus itself doesn't seem to be automatic.
However what you've posted seems to be not an official ROM for our le pro 3 but probably a porting of a 18s ROM minded for le 2 or lemax 2. As you can read It's prerooted and xposed is already installed. Probably we could think all 18s and 19s are porting from other Leeco devices. That could be the reason the fast charge doesn't function.
If you have these problem I suggest to downgrade to official 17s
Or
International BB72 17s - I prove it and is really good if you prefer to have your ROM in your language find them both here:
http://blog.grossoshop.net/leeco-x720-grossoshop-rom-italiano/
Sent from my LEX720 using Tapatalk
The slow charging isnt a bug.
It's just to protect that the phone gets to hot while u using fast charging and the phone.
If u use the phone the charging is limited to 500mA, if u dont use it u get the full Qualcom fast charge.
andy88de said:
Have you tried it...I'm on 17s and All seems to function well besides the camera OIS. The video are really shaky and the focus itself doesn't seem to be automatic.
However what you've posted seems to be not an official ROM for our le pro 3 but probably a porting of a 18s ROM minded for le 2 or lemax 2. As you can read It's prerooted and xposed is already installed. Probably we could think all 18s and 19s are porting from other Leeco devices. That could be the reason the fast charge doesn't function.
If you have these problem I suggest to downgrade to official 17s
Or
International BB72 17s - I prove it and is really good if you prefer to have your ROM in your language find them both here:
http://blog.grossoshop.net/leeco-x720-grossoshop-rom-italiano/
Sent from my LEX720 using Tapatalk
Click to expand...
Click to collapse
dont try , using 17s ......
probably a porting of a 18s ROM minded for le 2 or lemax 2.
Anybody can post the 18s firmware somewhere I can download?!
I can´t access the files there. I don´t have account nor would be able to create one
BIGGEST BUG so far is the total unreliability with notification and alarm clock. It´s a total horror. One it´s all fine...the very next NOTHING. If I wouldn´t use a backup phone waking me I´d be late a lot of times
I can affirm....as long as display is lit charging is slow....even some time after that....but then some minutes later it start using mor than just 0,5A. Even in 5V charging! Which is FAR from fast charging
Flash 17s...is far better. You can scroll up and find stock and european version in the Italian web site I posted before.
Sent from my LEX720 using Tapatalk
I have a semi-bricked N9300 dual sim from Hongkong (TGY).
No matter which firmware I try odin always fails with that dreaded "check sw rev failed" - aka the rom is not the right one apparently.
I tried the latest firmware available at samsung-firmware.net (or something) from 10th of october 2016 - but I think there was an even newer firmware installed on this thing.
TWRP is still working - so if theres a way to "downgrade" with TWRP by flashing partitions directly with DD that would work also I guess.
Please help - I tried to flash a modem part only (CP) and since then the phone is in a bootloop. Before I had it running and charging fine (combination of hongkong system partition and a customized chinese kernel which had the charging block disabled).
--
Is there any way to figure out which software/firmware is actually installed?
getprop tells me [ro.bootloader]: [N9300ZHU3BQB1]
but the latest firmware available online at samsung-firmware.net is N9300ZHU2BPJ4 version.
That's what I found
http://webcache.googleusercontent.c...F%D8%B1%D9%81%D8%AA+&cd=1&hl=fr&ct=clnk&gl=fr
Envoyé de mon SM-G935F en utilisant Tapatalk
benyou54 said:
That's what I found
http://webcache.googleusercontent.c...F%D8%B1%D9%81%D8%AA+&cd=1&hl=fr&ct=clnk&gl=fr
Envoyé de mon SM-G935F en utilisant Tapatalk
Click to expand...
Click to collapse
thanks alot for your help!
alrdy found that myself but that one doesnt let you download unfortunately =(
I am trying to contact that person who uploaded it directly in hopes he still has it.
hello any updates?