Develop Bugs

stuck at MI_RECOVERY 2.0.1

please any one give me a solution how to get out of this problem..
i have redmi 1s , which is stuck at MI-Recovery 2.0.1
when i power on phone, its allways getting redirected to this recovery.. i havent ROOTED yet. the phone is not going to any further screen..
all this happened when i tried to install update.. now my phone is not at all detecting in the system also !
i have STABLE ROM which i downloaded from MI website, i renamed it and kept in MicroSD card as update.zip
but when i try to install it from MI-Recovery its saying update.zip not found.. please help me ..
i wish i wouldnt have downloded this update file:crying:

Relax, it's easy to recover your phone
Step 1:
a) Download & Install MiPhone flash tool from:
http://bigota.d.miui.com/tools/MiPhone2015731.exe
b)Download factory image to restore your device:
For MIUI 5 latest stable download : http://bigota.d.miui.com/JHCMIBL56.0/armani_global_images_JHCMIBL56.0_4.3_in_f29358d132.tgz
For MIUI 6 latest stable download: http://bigota.d.miui.com/V6.7.1.0.KHCMICH/armani_global_images_V6.7.1.0.KHCMICH_20150723.0000.6_4.4_global_3155609c91.tgz
c) Extract the archive into an easily accessible location
Step 2:
a) Open MiPhone app & click browse to select the folder where you extracted the rom
b) If your phone is in recovery mode take out it's battery for a second and put it back
c) Now start your phone in fastboot mode by pressing volume down and the power button simultaneously
d) Connect the phone to your pc and let it alone for 1 minute to allow windows to install its drivers
e) In MiPhone app click refresh and you should see a device appearing
f) Click Flash and don't touch your pc or phone until the job is done.
Further info / biography:
http://en.miui.com/a-234.html

Thank you very much
seth66 said:
Relax, it's easy to recover your phone
Step 1:
a) Download & Install MiPhone flash tool from:
http://bigota.d.miui.com/tools/MiPhone2015731.exe
b)Download factory image to restore your device:
For MIUI 5 latest stable download : http://bigota.d.miui.com/JHCMIBL56.0/armani_global_images_JHCMIBL56.0_4.3_in_f29358d132.tgz
For MIUI 6 latest stable download: http://bigota.d.miui.com/V6.7.1.0.KHCMICH/armani_global_images_V6.7.1.0.KHCMICH_20150723.0000.6_4.4_global_3155609c91.tgz
c) Extract the archive into an easily accessible location
Step 2:
a) Open MiPhone app & click browse to select the folder where you extracted the rom
b) If your phone is in recovery mode take out it's battery for a second and put it back
c) Now start your phone in fastboot mode by pressing volume down and the power button simultaneously
d) Connect the phone to your pc and let it alone for 1 minute to allow windows to install its drivers
e) In MiPhone app click refresh and you should see a device appearing
f) Click Flash and don't touch your pc or phone until the job is done.
Further info / biography:
http://en.miui.com/a-234.html
Click to expand...
Click to collapse
THank you very much bro, you have helped me a lot , i didnt see your reply till yesterday night.. i have flashed in the process which u said..
now its working perfectly ..
how do i know what is my MIUI version ? i some where saw its miui7 .. does it mean i am in miui7 ? my previous one was miui6 .. how can i know what is my version of miui ..?

SOLVED
oh its ok .. problem SOLVED :: :highfive::victory::fingers-crossed:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
finally i am in MIUI 7

Yeh Dude Its working fine for me........... Many Many thanks for this....
SAGAR SAVKAR

Lol I once had this problem

LG Flash Tool error ls980

Error: CrossDL d802 to ls980 SW
build.prop need urgent help from ls980 D802 instead of written, so I'm glad they do not get how software helps arkadşlar düzet I knew it ..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

taksi02 said:
Error: CrossDL d802 to ls980 SW
build.prop need urgent help from ls980 D802 instead of written, so I'm glad they do not get how software helps arkadşlar düzet I knew it ..
Click to expand...
Click to collapse
Is there no one to help

your phone is originally an LS980 (sprint) converted into d802 , u surely flashed a wronge files but
i think u need to shortcut the 2 capacitors
just remove the buttons connector ,then that metalic plat that its glued in just to get access tothe ic chip and motherboard , of course to do this u need to takr off the baterry and all connectors, once u takr off yhe buttons reconnect every connwctor except the one of buttons and baterry
Thrn connect the the phone to the pc by using a usb (without baterry) then u need a liyyle screw driver or a wire to short the capacitor c5000 and c5004, keep trying till u heard thr pc detect new device named qhusb
Great , for that you need to download srk tool 2.1 just google it
Then selectfix utility then unbrick qhusb and select the correct drive
It will flash : haf, boot , aboot
Thats good for now ur download mode is back to life
Then for ls980 u need to install stock tot file (ls890zv7.tot) flash it with lg flash tool use manual mode u need a dll file (lgls980_20130904_lgflashv151.dll) download it on google... i ll send you links later hiw to do this,im using my phone
Once finished , ur phone is back to life but no signal
Easy ,just need to root. Then install twrp recovery
After that u need to install via recovery mode the (ls980stockuniversal to d802.zip)
And u re phone is getting signal and being fixed
edit: here the tutorial links that helps ya how to do everything
1- to get your phone alive ( to be detected as qusb_bulk)
http://forum.xda-developers.com/lg-g...brick-t2904404
2- this to fix the qusb issue & download mode back to life
https://www.youtube.com/watch?v=ERZvlJIC9dE
3- to install the stock tot rom , Root , then install twrp recovery mode , & then full unlock you cell phone
https://www.youtube.com/watch?v=FGQ2aGlumWs
http://forum.xda-developers.com/spri...m-att-t3188248

Hi Folks,i have this problem.
Can someone help please ?

aSpirit81 said:
Hi Folks,i have this problem.
Can someone help please ?
Click to expand...
Click to collapse
you need to read about cross dll , you need to edit TOT file to flash Phone

Yes,i read that,but many people complain on other errors after that..bin file erorr for example....

How to succesfully edit tot file ? Ls 980 got 5 d802 got 4 caracters...
Sent from my SM-G900F using Tapatalk

[SOLVED] Redmi Note 5 Pro | Dead | No EDL | No FastBoot | LED is Not Blinking |

Hello All,
Last night I've clean flashed latest MIUI 10 Global Beta 8.7.10 via TWRP after that my device is bricked and not turning on anymore
then I've connected my device with my PC and opened device manager I've verified that "Qualcomm HS-USB QDLoader 9008 (COM6)"
drivers is installed, Then I'm starting to flashing process without TestPoint Method via MiFlash Tool. I'm facing a "Cannot Read From Port COM6"
After TestPoint using MiFlash Tool I'm facing bunch of errors.. Like "The requested resource is in use", same previous error "Cannot Read From Port COM6", "The write timeout" ..
I've attached Screen Shots Below
-Please Help Me.:crying:

Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Vimal Vinz said:
Hello All,
Last night I've clean flashed latest MIUI 10 Global Beta 8.7.10 via TWRP after that my device is bricked and not turning on anymore
then I've connected my device with my PC and opened device manager I've verified that "Qualcomm HS-USB QDLoader 9008 (COM6)"
drivers is installed, Then I'm starting to flashing process without TestPoint Method via MiFlash Tool. I'm facing a "Cannot Read From Port COM6"
After TestPoint using MiFlash Tool I'm facing bunch of errors.. Like "The requested resource is in use", same previous error "Cannot Read From Port COM6", "The write timeout" ..
I've attached Screen Shots Below
-Please Help Me.:crying:
Click to expand...
Click to collapse
Its gone man...Its gone

Try MiFlash latest MIUI 10 Global Beta fastboot
I think this is because Anti Rollback

There is no MIUI 10 Fastboot ROM. For Redmi Note 5 Pro.
LhanaSR said:
Try MiFlash latest MIUI 10 Global Beta fastboot
I think this is because Anti Rollback
Click to expand...
Click to collapse
Is This Possible Solution?

Same issue happened with me and i gave it to service center. Now they are replacing my mobile motherboard. And they will replace it for free as it will be in warranty

Vimal Vinz said:
Is This Possible Solution?
Click to expand...
Click to collapse
Maybe....
It worth to try anyway

How it will be a warranty?? You've unlocked your bootloader so, Your warranty will be voided.

This is Fixed Check This Thread https://forum.xda-developers.com/redmi-note-5-pro/how-to/guide-redmi-note-5-pro-unbrick-t3816178

I have similar problem
phone totally died.
I did test point and I can see it as Qualcomm device but when I try to flash I have error can't open port COM....
I saw there is a tutorial but I can't write my MI ID and I can't open the login windows on MiFlash....
How to do it?
please help me the phone is new....

rfiore said:
I have similar problem
phone totally died.
I did test point and I can see it as Qualcomm device but when I try to flash I have error can't open port COM....
I saw there is a tutorial but I can't write my MI ID and I can't open the login windows on MiFlash....
How to do it?
please help me the phone is new....
Click to expand...
Click to collapse
Did you solve the problem?

I have 100% the same problem:
if you try flashing any rom, even latest beta rom you get the message "Can not read from port COM{portnum}".
I followed every possible tutorial on this forum, nothing works.
Phone is refusing to flash with any rom.
There is a workaround: you can replace inside the images/ directory prog_emmc_firehose_Sdm660_ddr.elf file with a custom file.
( http://www.mediafire.com/file/mxugl93nf4675k9/prog_emmc_firehose_Sdm660_ddr.elf/file )
Then you can flash, you will not get the message "Can not read from port COM{portnum}" anymore.
However after flashing your phone will not boot.
There is no solution at the moment, you can throw away your phone.

@talhosvi If the phone will not boot then what is the point of doing this?

HTC One E9 plus - dotview

Hello Dears,
kindly help me as my phone after hard reset stuck on dot view mode automaticly and i can't exit it or even setup my phone like gmail or lang ,
after five seconds after make har resest dot view mode apper and i can't exit it ,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Best Regards ,

Redo the hard reset and try again. Also, I suspect that your screen is frozen (watch for changes in dot view mode, like time and battery percentage). It might also be that your tactile screen isn't working anymore and requires a change.

sharvyngunga said:
Redo the hard reset and try again. Also, I suspect that your screen is frozen (watch for changes in dot view mode, like time and battery percentage). It might also be that your tactile screen isn't working anymore and requires a change.
Click to expand...
Click to collapse
Thanks Dear for your replay ,
but the screen is not freezed as i can check my call history and time and battary status ,
also i made har reset and change all frim as i made new flash but problem still exist ,
Regards

Can you share a video of the boot process?
I'll try my best to help you, but I can't guarantee success.

sharvyngunga said:
Can you share a video of the boot process?
I'll try my best to help you, but I can't guarantee success.
Click to expand...
Click to collapse
Thanks Dear ,
i don't have another phone , but i will try to get new one ,
Thanks

Sorry, this is completely unrelated from the current topic but I reallly need help..I tried to flash a rom on my HTC but thr preloader got corrupted xo my phone go hard bricked. Pluging the phone into a computer just shows a red led and the computer shows nothing in device manager.
I tried uninstalling the MTK Preload VCOM driver and reinstalling it but that still didn't work.
Even pressing volume keys while connecting still gave nothing.
I also tried disconnecting the battery and reconnecting the phone to the computer but still nothing.
If there is anyone, please help me.....
I need to unbrick my phone................... I am begging, please help me.

When my E9 got hard bricked, I sent it to a repair shop. They took a long time, but they brought it back to life.
Now, I had a hard brick issue with a Lenovo P1M Vibe (also a MTK device). I solved it using SP TOOL and the proper files. I don't know why the app suddenly decided to detect my phone after dozens of tries. But, during my research, I found interesting articles:
How to get a PC detect and MTK device after flashing wrong ROM/Firmware (Test Point method)
Download the latest & updated stock rom firmware of popular phones like samsung, tecno, itel, infinix, etc with flashing & upgrade tools & instruction
www.romkingz.net
As for the software part of the solution:
[Guide/Info] [How To] Unbrick your Bricked MTK Devices (Dead Brick)
This thread is about how to recover the MTK Android phone, if it has gone Bricked (soft/hard/dead/etc) THIS IS FOR INFORMATION ONLY. Q. How Phone gets Bricked? Ans : Basically, phone get bricked during the installation of Android OS (flashing)...
forum.xda-developers.com
You will need additional files for your phone during this process. You can find them online.

Stuck/bricked in EDL mode?! That's the solution!

This is 2 days long story..
A friend gave me his Poco M3 for changing rom.
Searched an alternative working way to bypass the 7 days wait to unlock bootloader.
After some tries the phone goes in permanent EDL stuck.
Lost 2 nights searching and tried EVERYTHING: Qfire, Miflash (bypassing login but error for "not associated to this account"), enegeering rom, test points, etc..
After the successfully flashed, the phone was yet in EDL mode.
No way to exit.
but, finally, found a solution.
Heres what you need:
- Qualcomm Drivers
- Fastboot ROM
- MiFlash
- Patched Firehose (for bypass login to MiFlash)
Procedure:
- Install the Qualcomm drivers
- extract the downloaded fastboot rom
- go into rom folder, then images folder, and overwright the Firehose with the patched one
- now disconnect the fingerprint sensor cable from mainboard
- open Miflash, select the folder and flash it
- after complete the flash, disconnect cable from pc, disconnect the battery, reconnect the fingerprint sensor cable and reconnect the battery
and, magically, NOW WORKS.
Follow the procedure exactly otherwise will not work and will be stuck in EDL.
Hope to save time and money to someone have my same problem.

Nope mine is stuck at flashing state... I hate this phone, I tried almost everything
But thanks anyway
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I'm constantly amazed how crappy all this software is.
First, there is this fixation with Com ports. That's so 1990's.
The USB interface is just a plain ol' bulk interface. Why not use that instead of some bogus virtual Com port driver?
Everything should have timeouts, there is no reason that a program should hang.
I'd almost suggest that you try my EDL client but I don't know if this flash_all is using sparse files or calculated sizes which are not things that I've implemented.

For my daughter's M3 the trick worked, but only one time.
When I switched off the phone, it returned to EDL mode.
Works only if I don't switch off the phone.
There must be a hardware fault/bug, probably triggered by the latest MIUI 12.5 update. I think that this problem will not have a definitive working solution.

flash in miflash error set patition needhelp

fastleo63 said:
For my daughter's M3 the trick worked, but only one time.
When I switched off the phone, it returned to EDL mode.
Works only if I don't switch off the phone.
There must be a hardware fault/bug, probably triggered by the latest MIUI 12.5 update. I think that this problem will not have a definitive working solution.
Click to expand...
Click to collapse
I can confirm that this happens. My Poco M3 does the same thing. I can flash it in EDL mode but after a reboot (or two) or powering it off and powering it back on, it's stuck in EDL mode once more.
This phone is dreadful and it's such a shame.
I'd love to see a proper, permanent solution to this, but I don't think it's possible.
Maks13xe said:
flash in miflash error set patition needhelp
Click to expand...
Click to collapse
There's probably not much you can do besides trying again. Make sure you are on the most recent version, I think it's 20220507
Personally, I just had to select the rom folder (after replacing the prog_firehose_ddr.elf file in the images subdirectory) and then flash.
This thread has the proper details: POCO M3 Stuck in EDL
You can get the most recent MiFlash here: Xiaomiflashtool.com - Xiaomi Flash Tool 20220507