This is 2 days long story..
A friend gave me his Poco M3 for changing rom.
Searched an alternative working way to bypass the 7 days wait to unlock bootloader.
After some tries the phone goes in permanent EDL stuck.
Lost 2 nights searching and tried EVERYTHING: Qfire, Miflash (bypassing login but error for "not associated to this account"), enegeering rom, test points, etc..
After the successfully flashed, the phone was yet in EDL mode.
No way to exit.
but, finally, found a solution.
Heres what you need:
- Qualcomm Drivers
- Fastboot ROM
- MiFlash
- Patched Firehose (for bypass login to MiFlash)
Procedure:
- Install the Qualcomm drivers
- extract the downloaded fastboot rom
- go into rom folder, then images folder, and overwright the Firehose with the patched one
- now disconnect the fingerprint sensor cable from mainboard
- open Miflash, select the folder and flash it
- after complete the flash, disconnect cable from pc, disconnect the battery, reconnect the fingerprint sensor cable and reconnect the battery
and, magically, NOW WORKS.
Follow the procedure exactly otherwise will not work and will be stuck in EDL.
Hope to save time and money to someone have my same problem.
Nope mine is stuck at flashing state... I hate this phone, I tried almost everything
But thanks anyway
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm constantly amazed how crappy all this software is.
First, there is this fixation with Com ports. That's so 1990's.
The USB interface is just a plain ol' bulk interface. Why not use that instead of some bogus virtual Com port driver?
Everything should have timeouts, there is no reason that a program should hang.
I'd almost suggest that you try my EDL client but I don't know if this flash_all is using sparse files or calculated sizes which are not things that I've implemented.
For my daughter's M3 the trick worked, but only one time.
When I switched off the phone, it returned to EDL mode.
Works only if I don't switch off the phone.
There must be a hardware fault/bug, probably triggered by the latest MIUI 12.5 update. I think that this problem will not have a definitive working solution.
flash in miflash error set patition needhelp
fastleo63 said:
For my daughter's M3 the trick worked, but only one time.
When I switched off the phone, it returned to EDL mode.
Works only if I don't switch off the phone.
There must be a hardware fault/bug, probably triggered by the latest MIUI 12.5 update. I think that this problem will not have a definitive working solution.
Click to expand...
Click to collapse
I can confirm that this happens. My Poco M3 does the same thing. I can flash it in EDL mode but after a reboot (or two) or powering it off and powering it back on, it's stuck in EDL mode once more.
This phone is dreadful and it's such a shame.
I'd love to see a proper, permanent solution to this, but I don't think it's possible.
Maks13xe said:
flash in miflash error set patition needhelp
Click to expand...
Click to collapse
There's probably not much you can do besides trying again. Make sure you are on the most recent version, I think it's 20220507
Personally, I just had to select the rom folder (after replacing the prog_firehose_ddr.elf file in the images subdirectory) and then flash.
This thread has the proper details: POCO M3 Stuck in EDL
You can get the most recent MiFlash here: Xiaomiflashtool.com - Xiaomi Flash Tool 20220507
Related
Hello All,
Last night I've clean flashed latest MIUI 10 Global Beta 8.7.10 via TWRP after that my device is bricked and not turning on anymore
then I've connected my device with my PC and opened device manager I've verified that "Qualcomm HS-USB QDLoader 9008 (COM6)"
drivers is installed, Then I'm starting to flashing process without TestPoint Method via MiFlash Tool. I'm facing a "Cannot Read From Port COM6"
After TestPoint using MiFlash Tool I'm facing bunch of errors.. Like "The requested resource is in use", same previous error "Cannot Read From Port COM6", "The write timeout" ..
I've attached Screen Shots Below
-Please Help Me.:crying:
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Vimal Vinz said:
Hello All,
Last night I've clean flashed latest MIUI 10 Global Beta 8.7.10 via TWRP after that my device is bricked and not turning on anymore
then I've connected my device with my PC and opened device manager I've verified that "Qualcomm HS-USB QDLoader 9008 (COM6)"
drivers is installed, Then I'm starting to flashing process without TestPoint Method via MiFlash Tool. I'm facing a "Cannot Read From Port COM6"
After TestPoint using MiFlash Tool I'm facing bunch of errors.. Like "The requested resource is in use", same previous error "Cannot Read From Port COM6", "The write timeout" ..
I've attached Screen Shots Below
-Please Help Me.:crying:
Click to expand...
Click to collapse
Its gone man...Its gone
Try MiFlash latest MIUI 10 Global Beta fastboot
I think this is because Anti Rollback
There is no MIUI 10 Fastboot ROM. For Redmi Note 5 Pro.
LhanaSR said:
Try MiFlash latest MIUI 10 Global Beta fastboot
I think this is because Anti Rollback
Click to expand...
Click to collapse
Is This Possible Solution?
Same issue happened with me and i gave it to service center. Now they are replacing my mobile motherboard. And they will replace it for free as it will be in warranty
Vimal Vinz said:
Is This Possible Solution?
Click to expand...
Click to collapse
Maybe....
It worth to try anyway
How it will be a warranty?? You've unlocked your bootloader so, Your warranty will be voided.
This is Fixed Check This Thread https://forum.xda-developers.com/redmi-note-5-pro/how-to/guide-redmi-note-5-pro-unbrick-t3816178
I have similar problem
phone totally died.
I did test point and I can see it as Qualcomm device but when I try to flash I have error can't open port COM....
I saw there is a tutorial but I can't write my MI ID and I can't open the login windows on MiFlash....
How to do it?
please help me the phone is new....
rfiore said:
I have similar problem
phone totally died.
I did test point and I can see it as Qualcomm device but when I try to flash I have error can't open port COM....
I saw there is a tutorial but I can't write my MI ID and I can't open the login windows on MiFlash....
How to do it?
please help me the phone is new....
Click to expand...
Click to collapse
Did you solve the problem?
I have 100% the same problem:
if you try flashing any rom, even latest beta rom you get the message "Can not read from port COM{portnum}".
I followed every possible tutorial on this forum, nothing works.
Phone is refusing to flash with any rom.
There is a workaround: you can replace inside the images/ directory prog_emmc_firehose_Sdm660_ddr.elf file with a custom file.
( http://www.mediafire.com/file/mxugl93nf4675k9/prog_emmc_firehose_Sdm660_ddr.elf/file )
Then you can flash, you will not get the message "Can not read from port COM{portnum}" anymore.
However after flashing your phone will not boot.
There is no solution at the moment, you can throw away your phone.
@talhosvi If the phone will not boot then what is the point of doing this?
Hi,
hope someone could help me.
I have a Mi max 3. I was on latest stable ROM (Global) which is miui_MIMAX3Global_V11.0.2.0.QEDMIXM_4eb86f33af_10.0
Then I flashed OrangeFox Recovery and installed Chinese Beta Rom which is miui_MIMAX3_20.6.17_e4a1ec4252_10.0
I reinstalled few times because I noticed some issues with notification and also needed gapps because not included in chinese beta rom. However later I decided to flash back from Chinese Beta Rom to Global Stable Rom again. I got a message to enter password to start Android. Then I did different steps like wipe Data, Format Data, flashed Global Stable, flashed Chinese Beta and so on. Actually it only booted with bootloop while MIUI Loading screen appears. I did some google research and found out I would need to flash these files: I flashed Disable_Dm-Verity_ForceEncrypt_12.27.2019 and no-verity-opt-encrypt-6.0 but after that I couldnt even get into Android loading screen, after restarting device it only would load Recovery and Fastboot mode. So even worse than before. Cant remember right now what I did next but However, currently situation is this:
I have TWRP (Not Orangefox) installed and can boot into it
I can boot into Fastboot
But doesnt matter if Chinese Beta ROM or GLobal Stable ROM is installed, it will load untl MIUI Loading Screen but hangs there (bootloop)
Even if I flash whole official ROM (nitrogen_global_images_V10.2.1.0.PEDMIXM_20190226.0000.00_9.0_global) via Mi Flash Tool I do get an Error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What can I do? I am pretty sure I could get it back to work, I am just frustrated because trying all this whole day already and just cant find the right steps until it wouldl load normally and boot up normally.
Please, isn't there anyone who can help me to get the phon back booting up?
Antirollback?
Try as a temp solution xiaomi.eu ROM
Wywern.pl said:
Antirollback?
Try as a temp solution xiaomi.eu ROM
Click to expand...
Click to collapse
I just check for activated Antirollback but seems it is not enabled on my device
C:\adb>fastboot getvar anti
getvar:anti FAILED (remote: GetVar Variable Not found)
finished. total time: 0.016s
C:\adb>
So that is a good sign at least, ya?
I found a a MIUI 12 based ROM for Mi max 3 on xiaomi.eu:
https://xiaomi.eu/community/threads/20-6-18.56244/
https://androidfilehost.com/?fid=8889791610682873498
But it says antirollback enabled. So should I try to flash it or not? Seems I will have antirollback enabled afterwards?
Unfortunately I cant register with xiaomi.eu, they ban all my registration automatically coz of fraud protection
Wywern.pl said:
Antirollback?
Try as a temp solution xiaomi.eu ROM
Click to expand...
Click to collapse
Hey @Wywern.pl or anyone else, can you hekp me again? =(
A local reapir shop managed it somehow to get the phone back to life. It is now booting up to MIUI 10.2.1.0 Stable - (OEDMIFK)
But unfortunately my WIFI is not working anymore. If I toggle on, it will be turned on for a moment and searching for networks but does not find one, then it switchwes off WIFI automatically. Mac address is someting like 2.000.00.00 and camera and its flash warent working.
Anyone got an idea what this could be?
I am now downloading official OTA Update (via mobile data) to MIUI 11.0.7.0 Stable (PEDMIXM) and hope that update wll bring my WIFI back to work.
Great news
WiFi problem - only thing comes to my mind is baseband
Acc camera - no idea , hope new ROM will work better
luckily update fixed everything, all is working normal again. Thx anyway!
Hello Dears,
kindly help me as my phone after hard reset stuck on dot view mode automaticly and i can't exit it or even setup my phone like gmail or lang ,
after five seconds after make har resest dot view mode apper and i can't exit it ,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Best Regards ,
Redo the hard reset and try again. Also, I suspect that your screen is frozen (watch for changes in dot view mode, like time and battery percentage). It might also be that your tactile screen isn't working anymore and requires a change.
sharvyngunga said:
Redo the hard reset and try again. Also, I suspect that your screen is frozen (watch for changes in dot view mode, like time and battery percentage). It might also be that your tactile screen isn't working anymore and requires a change.
Click to expand...
Click to collapse
Thanks Dear for your replay ,
but the screen is not freezed as i can check my call history and time and battary status ,
also i made har reset and change all frim as i made new flash but problem still exist ,
Regards
Can you share a video of the boot process?
I'll try my best to help you, but I can't guarantee success.
sharvyngunga said:
Can you share a video of the boot process?
I'll try my best to help you, but I can't guarantee success.
Click to expand...
Click to collapse
Thanks Dear ,
i don't have another phone , but i will try to get new one ,
Thanks
Sorry, this is completely unrelated from the current topic but I reallly need help..I tried to flash a rom on my HTC but thr preloader got corrupted xo my phone go hard bricked. Pluging the phone into a computer just shows a red led and the computer shows nothing in device manager.
I tried uninstalling the MTK Preload VCOM driver and reinstalling it but that still didn't work.
Even pressing volume keys while connecting still gave nothing.
I also tried disconnecting the battery and reconnecting the phone to the computer but still nothing.
If there is anyone, please help me.....
I need to unbrick my phone................... I am begging, please help me.
When my E9 got hard bricked, I sent it to a repair shop. They took a long time, but they brought it back to life.
Now, I had a hard brick issue with a Lenovo P1M Vibe (also a MTK device). I solved it using SP TOOL and the proper files. I don't know why the app suddenly decided to detect my phone after dozens of tries. But, during my research, I found interesting articles:
How to get a PC detect and MTK device after flashing wrong ROM/Firmware (Test Point method)
Download the latest & updated stock rom firmware of popular phones like samsung, tecno, itel, infinix, etc with flashing & upgrade tools & instruction
www.romkingz.net
As for the software part of the solution:
[Guide/Info] [How To] Unbrick your Bricked MTK Devices (Dead Brick)
This thread is about how to recover the MTK Android phone, if it has gone Bricked (soft/hard/dead/etc) THIS IS FOR INFORMATION ONLY. Q. How Phone gets Bricked? Ans : Basically, phone get bricked during the installation of Android OS (flashing)...
forum.xda-developers.com
You will need additional files for your phone during this process. You can find them online.
Good day team mi 10t 5g, i have a problem for my mi 10t, i got black screen no display, even restart can't do, but when i place fingerprint to unlock, it vibrates and with led light, my phone is rooted. the black screen happen when i used my device as a remote control for TV using mi remote. any suggestion, violent reaction and tips & tricks will be appreciated. I used Global rom 12.0.5 something, didnt flash any rom, just using rooted myn device for xposed and gameguardian.
abrakadabraham said:
Good day team mi 10t 5g, i have a problem for my mi 10t, i got black screen no display, even restart can't do, but when i place fingerprint to unlock, it vibrates and with led light, my phone is rooted. the black screen happen when i used my device as a remote control for TV using mi remote. any suggestion, violent reaction and tips & tricks will be appreciated. I used Global rom 12.0.5 something, didnt flash any rom, just using rooted myn device for xposed and gameguardian.
Click to expand...
Click to collapse
Hi, can you restart the phone in custom recovery (if you have installed it) or stock recovery?
nope, there is no display even on restart power button or even connecting to charge, but when ill connect to charger it vibrates like normal charging, maybe my problem came form the lcd?
abrakadabraham said:
nope, there is no display even on restart power button or even connecting to charge, but when ill connect to charger it vibrates like normal charging, maybe my problem came form the lcd?
Click to expand...
Click to collapse
What about fastboot and is phone recognised in adb?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is the result, what can I do to make my screen back is there any way to make it work again?
abrakadabraham said:
this is the result, what can I do to make my screen back is there any way to make it work again?
Click to expand...
Click to collapse
Hi, try to flash the latest fastboot rom with MiFlash - https://c.mi.com/oc/miuidownload/detail?guide=2 - if the link is not opening set to Desktop mode in your browser.
Good luck, zaqm
zaqm said:
Hi, try to flash the latest fastboot rom with MiFlash - https://c.mi.com/oc/miuidownload/detail?guide=2 - if the link is not opening set to Desktop mode in your browser.
Good luck, zaqm
Click to expand...
Click to collapse
ok ill try sir, will update once done
is this good? echo mismatching image and device
abrakadabraham said:
View attachment 5396937
Click to expand...
Click to collapse
You are flashing the rom with the same region i.e. you have Global region device right?
yeah global
is this taking too long?
abrakadabraham said:
is this taking too long?
Click to expand...
Click to collapse
Try with older MiFlash version - 25.04.2017 and save the rom files in shorter location like C:\Xiaomi\rom files
ok ill try
older version did the flashing but unfortunately at the end it error not success, and now I cant enter fastboot, mi flash cant detect the device now, but adb can
Hi, something went wrong while trying to install pixelExperience on my redmi note 8 pro. It doesn't reach any screen, no fastboot, no recovery, no boot screen. The notification led light up when connected to the PC, but no charging screen.
I was installing pixelExperience 11 with no error, but it never booted up after rebooting.
I'm currently trying to flash rom downloaded from xiaomifirmwareupdater.com with SP flash tool. I'm using the version from UnbrickRN8ProNoAuth, it says it worked, but the phone won't start.
The booloader was unlocked, I tried both the global and the europe version. I don't know what to try now, any suggestion ?
What could be the problem, I was expecting that flashing the official rom would at least get me to the boot screen.
Thanks !
Hello to me, exactly the same thing happened to me when installing pixel experience, you follow all the steps of UnbrickRN8ProNoAuth
to use python, driver, libusb, bypass and finally spflashtool with the dafiles and the authfiles?
I use the version with this method is this:
https://c.mi.com/thread-3612344-1-0.html
With that I was able to start the mobile and the fastboot mode worked again, apparently it is a bug when entering pixel experience if you have firmware 12.5 that sometimes causes the brick, try that version it worked for me. a greeting
ps: especially remember to use the auth_sv5.auth in the program
and MTK_AllInOne_DA_mt6765_mt6785, if everything is correct you should get a green check, I tell you because first the program checks the rom if it is correct, do you connect it by pressing the 3 buttons at the same time?
Hey, thx, I'll try with this version then !
Yes I have the green check, and I connect the phone with only the vol+ pressed.
I need to do the bypass every time, is that the normal behaviour, and is there another step I should redo ?
robicop2 said:
Hey, thx, I'll try with this version then !
Yes I have the green check, and I connect the phone with only the vol+ pressed.
I need to do the bypass every time, is that the normal behaviour, and is there another step I should redo ?
Click to expand...
Click to collapse
Because of the preloader mode I never use volume + I always use the 3 buttons, so I added the "libusb filter" the bypass I don't know exactly what it is for, but the 2 times that I used the mediatek program and I used it, I just look at it, and according to github it is used for: "Small utility to disable bootrom protection (sla and daa)" and according to google the bootrom: "Bootrom (or Boot ROM) is a small piece of ROM mask or write-protected flash embedded inside of the processor chip. It contains the first code that the processor executes when turning on or resetting. "Enteoria, if it doesn't write you that data from version 12.0.4, it doesn't turn on, follow all the steps correctly with the rom that is shared with you. above and I should start your phone.
It's working again !!
I searched for a similar version but global, and installed it (https://c.mi.com/thread-3565279-1-0.html)
Thanks a lot.
If that can help someone, this time I had an error on the 4th step, it wasn't finding my phone whereas the step 5 could. I had to rerun step 3.
Now I have to choose between settling with this version or trying again ^^ did you manage to install pixelExperience in the end ?
Hi, I'm glad you fix it in the end, the rom that you put is the same, it only changes that mine is the europe version and yours is International, the google patch also changes,
In the end, if I could install pixel from 12.0.4 to pixel 12, from 12.5 the firmware is different and there are many bricks, I bricked myself just like you did not turn on anything, when going from 12.5 to pixel 11, from 12.0 no It opens up risks of going to pixel 11 or 12.
in the end, you can only install pixel 12, wanting to put 11 could not mount the system and the provider
The problem that the cameras do not work well in pixel, even installing gcam they go lag and not all of them work, not even the 64mpx mode, right now I am in miui stock with bootloader closed again. the cameras are important to me, greetings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}