I present you:
OmniROM nightlies. These are unofficial and not supported by the omnirom team.
So have fun. Reply with any bugs that aren't related to the omni team itself. Thanks.
DISCLAIMER:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Installation:
First time flash/install:
1. Download zip file (ROM)
2. Perform a backup of your current ROM if you'd like.
3. Wipe data/factory reset.
4. Flash ROM zip file.
5. Flash gApps.
6. Flash SuperSU if you'd like root.
7. Reboot.
Updating builds:
1. Download zip file (ROM)
2. Perform a backup of your current ROM if you'd like.
3. Flash ROM zip file (dirty flash works fine)
4. Flash SuperSU if you'd like root.
5. Reboot.
Recovery: TWRP
ROM: https://www.androidfilehost.com/?w=files&flid=155480
gApps: http://opengapps.org/
ARM64 7.1 nano
Root (optional): SuperSU SR3 v2.79
http://download.chainfire.eu/1021/Su...0114223742.zip
Known Issue/Bugs: Bugs?
Please post logs in the official thread on XDA.
Source: https://github.com/omnirom
Kernel: https://github.com/omnirom/android_kernel_nextbit_msm8992
Device: https://github.com/omnirom/android_device_nextbit_ether
Credits:
omnirom Team (http://www.omnirom.org)
AFH is down for uploading right now. Give me about an hour and this should be uploaded. Today's first build is done, so I'm just waiting on AFH.
First build is up on AFH. Let me know what you think.
dpryor88 said:
First build is up on AFH. Let me know what you think.
Click to expand...
Click to collapse
Can you say in what it differs from the Official version?
pintasmapila said:
Can you say in what it differs from the Official version?
Click to expand...
Click to collapse
It's nightly. Just going to have more recent commits than the latest official weekly until the next weekly is released. It's just for fun I guess. You don't have to try, I just figured I'd put it online if others want to give it a shot. I'm running it and it runs fine.
Are you planning on adding in features, navigation bar tweaks or anything like that?
Can you confirm if active fingerprint sensor (no need to press button when locked) works and isn't buggy? Navigation Bar tweaks?
@dpryor88 make sure you explicitly state that users CANNOT CANNOT CANNOT switch between this and the OFFICIAL builds without a full wipe.
Furthermore, if anyone running these unofficial builds starts submitting bug reports, I'm going to be very annoyed.
jimmyzyx said:
Can you confirm if active fingerprint sensor (no need to press button when locked) works and isn't buggy? Navigation Bar tweaks?
Click to expand...
Click to collapse
It's not buggy on the official builds. You're placing your finger on the button/sensor wrong.
Gandalf said:
[MENTION=7053342]
It's not buggy on the official builds. You're placing your finger on the button/sensor wrong.
Click to expand...
Click to collapse
I don't mean the sensor itself... I mean the "wake and unlock" feature. It's supposed to pick up the finger without needing to press the button, and it does that at times right after it's been locked. However if you leave it locked for a period of time, and try to unlock it with the sensor, it wouldn't pick it up.
Gandalf said:
@dpryor88 make sure you explicitly state that users CANNOT CANNOT CANNOT switch between this and the OFFICIAL builds without a full wipe.
Furthermore, if anyone running these unofficial builds starts submitting bug reports, I'm going to be very annoyed.
It's not buggy on the official builds. You're placing your finger on the button/sensor wrong.
Click to expand...
Click to collapse
Isn't that all a given? I stated that they're unofficial nighties. That should be sufficient.
jimmyzyx said:
I don't mean the sensor itself... I mean the "wake and unlock" feature. It's supposed to pick up the finger without needing to press the button, and it does that at times right after it's been locked. However if you leave it locked for a period of time, and try to unlock it with the sensor, it wouldn't pick it up.
Click to expand...
Click to collapse
Try this... Settinvs->Apps->Gear icon->Special Access->Battery Optimization and then select the drop down menu then find Device Features and set it to Don't Optimize.
I've found this fixes my issue with the active scanning.
dpryor88 said:
Isn't that all a given? I stated that they're unofficial nighties. That should be sufficient.
Click to expand...
Click to collapse
Common sense is not so common.
Saythis said:
Try this... Settinvs->Apps->Gear icon->Special Access->Battery Optimization and then select the drop down menu then find Device Features and set it to Don't Optimize.
I've found this fixes my issue with the active scanning.
Common sense is not so common.
Click to expand...
Click to collapse
It made it slightly better, but after being locked for a couple of minutes, it still doesn't work unless i press the button... not a big deal but just thought i might raise it
jimmyzyx said:
It made it slightly better, but after being locked for a couple of minutes, it still doesn't work unless i press the button... not a big deal but just thought i might raise it
Click to expand...
Click to collapse
Hmm... Yeah that is odd. Mine seems to do it sometimes intermittently after a reboot. I have found that after a clean flash that clearing the data and cache for Device Features seemed to also make it function more normally.
Saythis said:
Hmm... Yeah that is odd. Mine seems to do it sometimes intermittently after a reboot. I have found that after a clean flash that clearing the data and cache for Device Features seemed to also make it function more normally.
Click to expand...
Click to collapse
Will try that with the next build. Thanks for your responses!!
New build up. I guess that Gandalf guy got the thread moved. That dude has too much time on his hands apparently
dpryor88 said:
New build up. I guess that Gandalf guy got the thread moved. That dude has too much time on his hands apparently
Click to expand...
Click to collapse
Nah, just a proper dev who wants his work respected and not confused with anothers.
dpryor88 said:
New build up. I guess that Gandalf guy got the thread moved. That dude has too much time on his hands apparently
Click to expand...
Click to collapse
#facepalm
Gandalf said:
#facepalm
Click to expand...
Click to collapse
hey Gandalf, The download link is broken. I'm not sure if we are supposed to wait for some more to download the latest build. If it's so, i'm sorry for that...I'll be patient
andromuks said:
hey Gandalf, The download link is broken. I'm not sure if we are supposed to wait for some more to download the latest build. If it's so, i'm sorry for that...I'll be patient
Click to expand...
Click to collapse
This isn't an official Omni ROM build... This also isn't Gandalfs thread... Thought that would be obvious lol.
Saythis said:
This isn't an official Omni ROM build... This also isn't Gandalfs thread... Thought that would be obvious lol.
Click to expand...
Click to collapse
My appologies...<br>
People are reporting that your version has got better performance and SOT than most of the others so just wanted to download and try this one and found that I link isn't working. Do we have any alternate link? or we are supposed to wait more? ( either works for us as we have best developers like you ).. .
Related
Hi,
On this thread I'll put my unofficial CM9 builds. They are fully vanilla, except for the volume slider in the status bar, they are exactly the same as Hashcode builds and they include the latest CM source changes. According to this, the issues and bugs are exactly the same.
Read this thread before posting: http://forum.xda-developers.com/showthread.php?t=1615355. DO NOT report any problem in the main discussion/dev thread! You can report them here and pray .
Disclaimer :
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Changelog: http://review.cyanogenmod.com/#/q/status:merged+branch:ics,n,z
June 08 build (Source updated to IMM76L (http://review.cyanogenmod.com/#/c/17291/)): http://d-h.st/CiD
June 07 build: http://d-h.st/TMO
md5: f660a370a0a25e0961aea0551c09b911
June 06 build: http://d-h.st/B60
md5: 832b4f2a70c7cb9366cec8520c224738
Instructions:
Comming from Hashcode's CM9 or another build:
1) Reboot into Recovery (you must use TWRP 2.X or Hashcode's CWMR 5.5.0.4, otherwise flashing will fail)
2) Backup your current ROM
3) Wipe cache
4) Flash the ROM
5) Optionally flash GApps
6) Reboot
Comming from any other ROM:
1) Reboot into Recovery (you must use TWRP 2.X, otherwise flashing will fail. DO NOT try to use Hashcode's CWMR since some users report serious partitioning issues when wiping data/factory reseting as of 05-12 CWMR 5.5.0.4 build)
2) Backup your current ROM
3) Wipe data/factory reset (highly recommended but should work without if comming from a CM9 ROM. At least please DO NOT report any issue if you didn't wipe)
4) Flash the ROM
5) Optionally flash GApps
6) Reboot
Enjoy .
Thanks to:
Hashcode
pokey9000
twa_priv
JackpotClavin
icemank21
Diaruga
...
Much others.
Trojan38 said:
No volume slider for now, I'll try to add it in the next one .
Enjoy .
Click to expand...
Click to collapse
Hey Trojan38, please check your PM.
Appreciate you doing this, one of the main reasons I tend to stay with Hashcode's builds is that I like them plain vanilla. I like to customize them myself, so again, thanks for doing this.
Only thing I will mention is that d/l is really slow. LOL
Mike T
webdroidmt said:
Appreciate you doing this, one of the main reasons I tend to stay with Hashcode's builds is that I like them plain vanilla. I like to customize them myself, so again, thanks for doing this.
Only thing I will mention is that d/l is really slow. LOL
Mike T
Click to expand...
Click to collapse
Hey thank you .
Yes I'll try to chose another uploader next time .
Reserved
Sent from my Galaxy Nexus using xda premium
Trojan38, if I replace the systemUI apk with the one from Hashcode's latest build, will that give me the volume slider? Thanks.
Mike T
I don't know, try to backup the build's one and to replace with Hash's build one yep .
Trojan38 said:
I don't know, try to backup the build's one and to replace with Hash's build one yep .
Click to expand...
Click to collapse
Ok! Cool, thanks. Just finished the d/l, was able to take a nap, get up, shower and shave. J/K
Mike T
New build ready, will upload it tomorrow in the morning, including (I hope) twa_priv's volume slider .
Envoyé depuis mon GT-I9000 avec Tapatalk
I tried to download, took 45 minutes to get to 60% then the download failed.
webdroidmt said:
Trojan38, if I replace the systemUI apk with the one from Hashcode's latest build, will that give me the volume slider? Thanks.
Mike T
Click to expand...
Click to collapse
Didn't work, systemUI FCs. I'll wait for your new release. Thanks.
Mike T
Here's the new build including the volume slider, and without Bluetooth and Airplane Mode toggles (thanks to twa_priv) :
May 20 build (the name says May 21) : http://d-h.st/dQc
md5 : 8ca044b9d1289762e8d16a5318f22e0c
Thanks! Just installed the latest ROM and it works like a charm. Love the Volume Slider and the fact that those unnecessary Bluetooth and Flight Mode sliders are gone.
The only thing missing now is a fully functional sleep mode. ATM the screen does come on every few minutes which diminishes battery life.
Shahpur.Azizpour said:
ATM the screen does come on every few minutes which diminishes battery life.
Click to expand...
Click to collapse
Never seen this on any build. Could be related to an app you have installed.
You could do the following:
Install better battery stats (available on xda for free or if you want to support the dev also on the market) and check your wakelocks.
Or, you could make a nandroid backup, also backup all user apps using titanium backup, and start over. Full wipe (cache, dalvik, data and system) and flash again. The observe if this still happens.
Then restore your apps one by one and observe.
Trojan38 said:
Here's the new build including the volume slider, and without Bluetooth and Airplane Mode toggles (thanks to twa_priv) :
May 20 build (the name says May 21) : http://d-h.st/dQc
md5 : 8ca044b9d1289762e8d16a5318f22e0c
Click to expand...
Click to collapse
New build up and running well. Thanks and also thanks twa_priv. Btw, I've never had issues with the screen coming on as referenced by Shahpur.Azizpour on any of the builds.
Also, I use Green Power which overrides system settings for turning off wifi. When the screen is off, Green Power turns off the wifi and has been pretty effective at saving battery for me.
Mike T
webdroidmt said:
New build up and running well. Thanks and also thanks twa_priv. Btw, I've never had issues with the screen coming on as referenced by Shahpur.Azizpour on any of the builds.
Also, I use Green Power which overrides system settings for turning off wifi. When the screen is off, Green Power turns off the wifi and has been pretty effective at saving battery for me.
Mike T
Click to expand...
Click to collapse
I checked again and the problem was the app 'screen off and lock' after reinstall everything works fine.
But i noticed that charging was much much faster with the latest Hashcode build. Right now I'm charging with the stock kindle wall charger and it seems awfully slow....
The kernel is excatly the same, so there is no reason for .
In case anyone was wondering, I officially approve this thread.
It's been hell devving the kernel, recovery, bootloader and keeping a CM ROM up-to-date w/ the latest CM changes when I'm really just looking to test new kernel changes on a semi-currently CM build.
I will probably get the rest of the device tree good for merging w/ CM and then change my official build to something a bit different: A straight AOSP build from OmapZoom (TI) sources as a bleeding-edge build for testing new source changes on the device.
I was wondering a bit but figured Trojan38 would do the right thing by you before posting this up. Speaking of wondering, I've been wondering how you've been managing to keep all these pots cooking at the same time, with kernel, rom, bootloader and even recovery. Oh and I guess I forgot you also "tinker" a bit in the NT forum. WHEW!
You've been Super Man and I'm sure you realize that the KF community really appreciates your work. Looking forward to your future kernel development and thanks again.
Mike T
twa_priv said:
Never seen this on any build. Could be related to an app you have installed.
You could do the following:
Install better battery stats (available on xda for free or if you want to support the dev also on the market) and check your wakelocks.
Or, you could make a nandroid backup, also backup all user apps using titanium backup, and start over. Full wipe (cache, dalvik, data and system) and flash again. The observe if this still happens.
Then restore your apps one by one and observe.
Click to expand...
Click to collapse
thanks for the hints. screen off and lock was the app causing the problems!
What is NamelessROM?
NamelessROM Gerrit Review
What is NamelessROM ?
Simple - NamelessROM is opportunity.
An opportunity to have a voice to the development team of the after-market firmware that you run on your device.
The main goal of NamelessROM is to provide quality development for android devices, phones and tablets alike.
NamelessROM developers are available nearly 24/7 and respond to bug reports and feature requests almost instantly.
This availability will allow you, the end-user, to have direct input into exactly what features and functions are included on the firmware that YOU run.
NamelessROM maintains features and functions of several well-known open-source, AOSP-based ROMs, as well as many features of our own.
Visit our website for more detailed information.
NamelessROM = endless possibilities. Unless you have an iPhone, then you're out of luck.
Click to expand...
Click to collapse
ANNOUNCEMENT: We are looking for Device Maintainers to expand our support, please visit our IRC channel or PM @Evisceration, or @jumoog @dhiru1602 for information.
Disclaimer
#include <std_disclaimer.h>
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Click to expand...
Click to collapse
Working:
Everything (including hardware composer)
Click to expand...
Click to collapse
Got a bug report? Want to request a feature? Need extended support?
https://nameless-rom.org/
https://plus.google.com/communities/111682533298374492637
https://jira.nameless-rom.org/
Click to expand...
Click to collapse
Installation Instructions
FROM OTHER ROMS
Factory Reset/Wipe Data
Format System
Format Dalvik Cache
Install ROM
Install Gapps
Reboot
Profit
UPDATE FROM NamelessROM TO NEWER RELEASE
Just download the zip and flash it. You will NOT need to wipe anything.
Optionally you can also use our own OTA Updater
Click to expand...
Click to collapse
Contributions and Credit
Android/Google/AOSP
AOKP
AOSPA
CyanogenMod
OmniROM
SlimROMs
ALL OF OUR AWESOME TESTERS
Click to expand...
Click to collapse
Downloads
Rom:
http://sourceforge.net/projects/namelessrom/files/n-2.0/t0lte/
Gapps for 5.0:
https://s.basketbuild.com/gapps
Gapps mirror:
https://mega.co.nz/#!5R0D1B4L!1zP2aiDzlBAQ05I4UkgTNaVVLQME9Yjj1Fl7nwAPzs0
Click to expand...
Click to collapse
I'll give this a try, keep y all posted.
Is 3G fixed in this? With all other Roms 3G goes up and down continuously
Thank you for this Sir !!
Nameless has arrived !!...g
is netflix working? i know on cm12 its not.
Good news! awesome
It's so nice to have some Lollipop choices now. Thanks a lot. So there is no Netflix magic yet. Also, contact info not surviving reboots. -Thanks again
ruccarucca said:
is netflix working? i know on cm12 its not.
Click to expand...
Click to collapse
lollipop builds will currently not allow DRM protected content streaming..
It's a well known bug across all variant builds....and is being worked on...
It'll get a fix....just be patient....g
gregsarg said:
It'll get a fix....just be patient....g
Click to expand...
Click to collapse
What an amazing build , its nice and fast , one question , how come there is no task killer , like CM12 or anything , i try to hit the home botton and noting ,
other then that its so smooth
Joshua Mr PC Repair said:
What an amazing build , its nice and fast , one question , how come there is no task killer , like CM12 or anything , i try to hit the home botton and noting ,
other then that its so smooth
Click to expand...
Click to collapse
You need to config it in settings. Don't know why it defaults like this.
Currently I am only fixing device specific things. Need to fix proximity though...
DerTeufel1980 said:
You need to config it in settings. Don't know why it defaults like this.
Currently I am only fixing device specific things. Need to fix proximity though...
Click to expand...
Click to collapse
Thanks ill report back in a few day
The static audio issue happens to me when I receive a notification (at least while playing music over Bluetooth). Just reporting in
You can try this rom for working sensors
https://mega.co.nz/#!FAsTmQaS!oOA6rQa7zr6KUejPyfZkHJrqzh-gU7xlWj8X-d8CuW8
GPS is broken though
Gesendet von meinem GT-N7105 mit Tapatalk
does this work for i317m?
nosebleedXD said:
does this work for i317m?
Click to expand...
Click to collapse
yes im running it works fine youll just see in the about phone it will say gt-n1705 other than that i got no issues
Netflix sucks anyhow....showbox is so much better and theres no charge...ever.
DerTeufel1980 said:
You can try this rom for working sensors
https://mega.co.nz/#!FAsTmQaS!oOA6rQa7zr6KUejPyfZkHJrqzh-gU7xlWj8X-d8CuW8
GPS is broken though
Gesendet von meinem GT-N7105 mit Tapatalk
Click to expand...
Click to collapse
Just flashed the sensor fix ROM.
The GPS fix posted here works.
http://forum.xda-developers.com/showpost.php?p=57639586&postcount=54
I got 17/19 SATS right off the bat.
Thanks/Credit @fkfmfz and @gregsarg
The link is expired but I uploaded here.
https://www.androidfilehost.com/?fid=95864024717072099
Is there a way to have the notification sounds settings survive reboots? I have just been going through the settings each time and setting them all back to my choices each time I reboot.
Was it a dirty install? My settings are fine per reboot, aside from the Netflix issue and a freeze up that drained 40% battery, its been a decent ROM. I'm going to try the other 5.0 ROM whose thread says closed but is in fact still open.
It's a clean install. I had the same trouble on Kit Kat roms. I guess it may be something on my end.
-To clarify: this is only with custom sounds. MP3's or OGG files located either in stock internal location or external SD.
CyanogenMod 11 for the Samsung Galaxy Ace II x (GT-S7560M) and Galaxy Trend (GT-S7560)
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Not working:
FM Radio
Bugs:
*Camera only 3.2 megapixels (2048x1536)
*Uploading/sending videos via Instagram,Facebook and Facebook Messenger fails
Downloads:
Latest Build CM11 April 23th 2017
CHANGELOG
*Optimized dalvik
*Switched to my kernel test branch
*Miscellaneous fixes
Latest EXPERIMENTAL build: ExperimentalCM11 April 26th 2017 (by @motoralbi)
EXPERIMENTAL-CHANGELOG
*Work on bionic
*Switching to faster math functions
XposedFix
Download XposedFix.zip and flash it to get xposed working.
I have to tell you that this fix is a pretty much a big security breach,and this hack will never be incorporated in to my builds.
Flashing this fix WILL REGRESS ALL THE DALVIK CHANGES we've done so far.I do not provide support for issues regarding xposed.
Installation Instructions & Requirements:
1. Copy zip packages (ROM) to an SD Card
2. Enter recovery mode
3. Choose "install zip from sdcard"
4. Select "choose zip from sdcard" and locate the ROM zip package
5. Confirm the installation by choosing "yes"
Recoveries:
I recommend you use TWRP 3.0.2 by @kengnatural
You can also flash by codename13s TWRP 2.8.0.1
If you do not have one installed, please install one of them prior to installing the ROM!
IF YOU WANT TO USE GAPPS WITH ANY OF MY BUILD,FORMAT /SYSTEM PARTITION,FLASH ROM,BOOT IT AND THEN GO BACK TO RECOVERY AND FLASH GAPPS YOU WANT!(DONT FLASH GAPPS BEFORE FIRST BOOT!!!!)
IF YOU DONT DO THIS YOULL GET THE MESSAGE THAT SETUP WIZARD STOPPED WORKING!
THIS GOES FOR EVERYONE!
I recommend you always do a CLEAN FLASH of all my builds
Little notice:
This rom is ported version of CM11 for s7562.
I would like to say thank you to all people that are/were working on this rom:
@jonypx09
@Codename13
@m4jonez
@KlinkOnE
@kengnatural (not only for work you are doing but for mentoring me too!!)
@oF2pks (for making patches and allowing us easily to add wakelock blocker to CM11!)
guys who test my builds and report everything:
@noobcoder
@F4uzan (providing moral support)
@GreekDragon (providing moral support,thanks my giros brate)
Cyanogenmod Team
Google
Maintainers:
@pavlepiramida
@motoralbi
If you find any new bugs please report and try to make a logcat of it or at least provide a detailed explanation (what happend,what were you doing,how was the phone behaving) so I can recreate that bug myself and try to fix it!
My Github account: https://github.com/pavlepiramida
FrankenKernel repo: https://github.com/pavlepiramida/FrankenKernel
Tips for usage
For best experience I suggest you:
*set your CPU Governor to lulzactive
*set your I/O Governor to zen or CFQ
*If you dont use memory hungry apps disable KSM (it will improve your battery life just a little bit and performance)
*go to Settings/Developer options and reduce all animations to 0.5
*disable all touch sounds
*turn off Daydream in Settings/Display & lights
*turn off profiles if you do not use them
*go to Settings/Privacy and disable CyanogenMod statistics reporting
*also while you are there if you are not using Blacklist disable it
Flashable Samsung stock ICS sounds : https://www.androidfilehost.com/?fid=745425885120704205
All my builds will support @microg patch for signature spoofing
To learn more about this and why its in this rom check out his thread
[APP] microG GmsCore - lightweight free software clone of Google Play Services
"Setting up Microg" on kylessopen devices by @Zeroblood
Here you can get help for setting up Microg.
my androidfilehost folder with all build so far: https://www.androidfilehost.com/?w=files&flid=156391
Hey Pavle,
Why do you suggest turning CM stat reporting off ? I understand it's not very useful, but is there a real performance gain, or just a marginal one ?
breversa said:
Hey Pavle,
Why do you suggest turning CM stat reporting off ? I understand it's not very useful, but is there a real performance gain, or just a marginal one ?
Click to expand...
Click to collapse
For me that is always off as it is pinging their servers on every boot and sometimes causes a wakelock.
I did notice a small boost in performance but that could very well be a placebo.
Disabling does not harm you,so why not turn it off
Haha, alright, I did not know about that potential wakelock.
BTW, I'll have my friend try out one these builds tomorrow to try and make that wifi work again. I'll keep you informed !
breversa said:
Haha, alright, I did not know about that potential wakelock.
BTW, I'll have my friend try out one these builds tomorrow to try and make that wifi work again. I'll keep you informed !
Click to expand...
Click to collapse
Im sure it was just a corrupt download.
If not we'll think of something!
can i install it with cwm 5.6?
tomyjeje said:
can i install it with cwm 5.6?
Click to expand...
Click to collapse
nope
flash TWRP (as I recommended TWRP 3.0.2 by kengnatural)
Hi! A couple days ago I saw there was a link in this thread to a version of this ROM with the Omni kernel, which would fix the wifi problem in Latin American devices. Now it's gone.
What happened? Did that fix not work out? I was planning to try it this weekend...
Thanks!
mincem said:
Hi! A couple days ago I saw there was a link in this thread to a version of this ROM with the Omni kernel, which would fix the wifi problem in Latin American devices. Now it's gone.
What happened? Did that fix not work out? I was planning to try it this weekend...
Thanks!
Click to expand...
Click to collapse
I had to remove it as it was going into bootloop after flash on new build.
I have to test it a bit more.
It works for my July build but in September I changed few things that apparently dont play well with codebame13 kernel.
If I dont sort it out,Ill upload whole July rom with his kernel packed in it!
Thanks for your work. I'm looking forward to it.
By the way, in case it's relevant, a while ago I tried your "fixWifi.zip" from an old release, and it wasn't working for me. (It disabled bluetooth like you said it would, but it didn't restore wifi.) I don't know if that has anything to do with how the new release will work, but I'm telling you just in case.
mincem said:
Thanks for your work. I'm looking forward to it.
By the way, in case it's relevant, a while ago I tried your "fixWifi.zip" from an old release, and it wasn't working for me. (It disabled bluetooth like you said it would, but it didn't restore wifi.) I don't know if that has anything to do with how the new release will work, but I'm telling you just in case.
Click to expand...
Click to collapse
Hah it wasn't working for anyone,few important files were missing but I was to lazy to remove it from androidhost :/
hey pavle, did you try to fix wifi on this build or just camera?
the wifi still not work, i take a logcat but there is no error about wifi.
https://drive.google.com/open?id=0B8oAXWJSnBcvZ2xMczloT3M3cTg
do you know why?
noobcoder said:
hey pavle, did you try to fix wifi on this build or just camera?
the wifi still not work, i take a logcat but there is no error about wifi.
https://drive.google.com/open?id=0B8oAXWJSnBcvZ2xMczloT3M3cTg
do you know why?
Click to expand...
Click to collapse
Thx for Logcat,Ill see if there's something new in it!
Just a quick question,did you logcat while turning wifi on?
EDIT
Dude your logcat is an empty .txt file....
Did you remove it from Drive?
Process error, on my gt s7560.. how to fix? pls
metodding said:
Process error, on my gt s7560.. how to fix? pls
Click to expand...
Click to collapse
redownload rom
pavlepiramida said:
redownload rom
Click to expand...
Click to collapse
is not resolved
metodding said:
is not resolved
Click to expand...
Click to collapse
Strange,Im having trouble downloading it myself....
Seems that its a issue on androidfileshost side,sadly nothing I can do.
I'd suggest,if you are downloading it via phone,to try and download it via PC (Firefox,Chromium,Chrome......etc) and manually move ROM to SD Card,as sometimes theres an issue with browsers for phone.
Refresh few times download page and try again,meanwhile Ill send an email to androidfiles staff to see if they are doing anything on servers (maintenance or something else).
Thanks for report and I hope it gets sorted out soon!
pavlepiramida said:
Strange,Im having trouble downloading it myself....
Seems that its a issue on androidfileshost side,sadly nothing I can do.
I'd suggest,if you are downloading it via phone,to try and download it via PC (Firefox,Chromium,Chrome......etc) and manually move ROM to SD Card,as sometimes theres an issue with browsers for phone.
Refresh few times download page and try again,meanwhile Ill send an email to androidfiles staff to see if they are doing anything on servers (maintenance or something else).
Thanks for report and I hope it gets sorted out soon!
Click to expand...
Click to collapse
Always run the download from PC, tried several times .. the error is present equally
metodding said:
Always run the download from PC, tried several times .. the error is present equally
Click to expand...
Click to collapse
Are you using any ADBlocker on browser?(If you are disable it)
Are you using a VPN?(If you are disable it)
Have you tried other mirrors to download from?(Try other mirrors that are available,I suggest Quebec mirror )
YuanweiOS is based Candy7(Special thanks to Candy7 team).The main aim is to make ROM smooth and to add only necessary Features. We wanted to give the users a fun, fully customizable ROM. We will keep this ROM smooth and best in performance side and minimal on features side.
YuanweiOS Github
Disclaimer: We are not responsible for bricked devices, dead SD cards, thermonuclear war, or the current economic crisis caused by you following these directions. YOU are choosing to make these modificiations, andif you point your finger at me for messing up your device, I will laugh at you.
FEATURES
Battery bar
Multi-window
Status bar customization
Advanced power menu
Buttons settings:
-Long-press/double-tap actions
-Volume rocker
Brevent
Magsik
And so on ...
Flashing Steps:
Coming from another rom
1) Download YuanweiOS.zip
2) Download OpenGapps
3) Boot into recovery (TWRP)
4) Full wipe (Dalvik Cache, Cache, System, Factory Data Reset)
5) Flash YuanweiOS.zip
6) Flash Gapps
7) Reboot
Updating from previous YuanweiOS release
1) Download YuanweiOS.zip
2) Boot into recovery
3) Flash YuanweiOS.zip
4) Reboot
Special thanks to CandyRoms, LineageOS, SlimRoms, Omni, TeslaROM, and all the rest who make their source open. We can't do this on our own.
Webside
[ROM]YuanweiOS
ROM:
[ROM]YuanweiOS-kiwi
Contributors
jsbeyond,Yihao
Source Code:
https://github.com/yuanwei-os
https://github.com/yuanwei-os/android_device_huawei_kiwi/
https://github.com/yuanwei-os/android_kernel_huawei_kiwi/
Thanks: @crpalmer @BadDaemon
ROM OS Version: 7.1.2
ROM Kernel: Linux 3.1.x
Version Information
Status:Stable
Created 2017-07-18
Last Updated 2017-07-18
Welcome back Elan.
screenshots？
screenshots？
Devil_GBY said:
screenshots？
Click to expand...
Click to collapse
screenshots click on red screenshot option
Screenshots
@jsbeyond
Thanks for the UNHOLY.
Its running good on my L22 with a few glitches.
1. Not able to install modules (Viper & Atmos) from Magisk-13.0. Modules are downloaded though but I have flash them through TWRP only.
2. Not able to update Magisk from 13.0 to 13.2.
-Tried updating it, no success.
-Tried uninstalling the older version and installing newer version thru TWRP. The newer version installs but , After boot it does not load up.
subodhverma21 said:
@jsbeyond
Thanks for the UNHOLY.
Its running good on my L22 with a few glitches.
1. Not able to install modules (Viper & Atmos) from Magisk-13.0. Modules are downloaded though but I have flash them through TWRP only.
2. Not able to update Magisk from 13.0 to 13.2.
-Tried updating it, no success.
-Tried uninstalling the older version and installing newer version thru TWRP. The newer version installs but , After boot it does not load up.
Click to expand...
Click to collapse
i have no this issue
https://plus.google.com/communities/112720517052084764225
good job，thanks !
https://t.me/yuanweios
looks good but...
unholy development seriously? that is a bad boot animation, goes against my religion, definitely changing it.
other then that, the rom looks amazing!!! this might be my daily driver from now on.
Awesome
I like your ROM and have been using it for two weeks now. How or where can i get update to this ROM?
Thanks:good:
abolatito said:
I like your ROM and have been using it for two weeks now. How or where can i get update to this ROM?
Thanks:good:
Click to expand...
Click to collapse
seems like this ROM is abandoned...
crayonicle said:
seems like this ROM is abandoned...
Click to expand...
Click to collapse
OP is busy with real life. That explains it.
itisiryan said:
OP is busy with real life. That explains it.
Click to expand...
Click to collapse
well it's been like 2 or 3 months, I expected at least 1 update in that time, oh well, this was a good ROM as it was...
crayonicle said:
well it's been like 2 or 3 months, I expected at least 1 update in that time, oh well, this was a good ROM as it was...
Click to expand...
Click to collapse
Yeah. But he didn't update his other ROMs too.
itisiryan said:
Yeah. But he didn't update his other ROMs too.
Click to expand...
Click to collapse
oh ok
crayonicle said:
oh ok
Click to expand...
Click to collapse
But you can check his AFH account every now and then. I once saw him working on O.
itisiryan said:
But you can check his AFH account every now and then. I once saw him working on O.
Click to expand...
Click to collapse
omg thx so much for telling me, gonna try the LOS 15 unofficial O hope it works !
crayonicle said:
omg thx so much for telling me, gonna try the LOS 15 unofficial O hope it works !
Click to expand...
Click to collapse
Sadly it doesn't for the moment.
Code:
[COLOR="Purple"]#include <std_disclaimer.h>[/COLOR]
[COLOR="Navy"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/COLOR]
Installation:
If you are on stock OS, you need a custom recovery first. You can get the recommended TWRP recovery in the official installation instructions link below.
If you are coming from stock or other ROMs, you need to make a factory reset.
As always, make sure to backup before installing this ROM.
More detailed instructions at:
Install LineageOS on find7
Download link:
LineageOS Downloads
Recommended Google Apps package:
Open GApps (choose the variant you want. Recommended nano package)
Official root addon
LineageOS Extras
Changelog:
Changes for find7
Bug reports:
How to submit a bug report
LineageOS JIRA
Donate to support development:
Donate via PayPal to mikeioannina
Donate via PayPal to LineageOS
XDA:DevDB Information
Official LineageOS 15.1 for Find7a/s, ROM for the Oppo Find 7
Contributors
mikeioannina
Source Code: https://github.com/LineageOS
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Any version of ColorOS. Unified storage not supported.
Based On: LineageOS
Version Information
Status: Nightly
Created 2018-07-09
Last Updated 2018-11-15
Just curious. Are there any way for find 7 to install nano gapps? I keep on getting insufficient storage... Sad...
Am having problem of cold start gps. Takes about 8-10 mins before locking in. However, once lock in,everything work perfectly.
Updated on 18july.now everything is perfect. Even the battery life got better.
thank you???
luckywang95 said:
Just curious. Are there any way for find 7 to install nano gapps? I keep on getting insufficient storage... Sad...
Click to expand...
Click to collapse
You can delete the storage check in the installer script. Did it before and worked fine. I'm gonna try it tonight with this build.
Update: Stucked in bootloop. Gonna try tommorow again.
Update#2: Here is my working solution:
1. Flashing rom
2. Flashing addonsu
3. Flashing openGapps micro
Whats the perception about the Lineage<color>Accent.apks ?
They seemed to compromise my device and after removing these system aps
my find7 starts twice as fast as before.
In Settings->Apps they are all active but do nothing and their names are renamed like kakao lavendel kirsche carbon...
I'dont know whats this about,
but I feel Hacked and compromised by these apks!
Please explain what these apks are good for
and why it is stated in Settings->Apps that they do nothing else as being in background active
nor is anything protokollised from their activity!
I did a clean fresh install with these Custom Rom,
wiping all partitions and installing them with TWRP 3.2.2.0
With best regards Zoltan-X
P.S.: Find7 works better without these and no Errors are caused in usage so far!!!
Zoltan-X said:
Whats the perception about the Lineage<color>Accent.apks ?
They seemed to compromise my device and after removing these system aps
my find7 starts twice as fast as before.
In Settings->Apps they are all active but do nothing and their names are renamed like kakao lavendel kirsche carbon...
I'dont know whats this about,
but I feel Hacked and compromised by these apks!
Please explain what these apks are good for
and why it is stated in Settings->Apps that they do nothing else as being in background active
nor is anything protokollised from their activity!
I did a clean fresh install with these Custom Rom,
wiping all partitions and installing them with TWRP 3.2.2.0
With best regards Zoltan-X
P.S.: Find7 works better without these and no Errors are caused in usage so far!!!
Click to expand...
Click to collapse
Are you serious? These are just simple apks for the styles you can change from display settings.
If you are so curious about "being hacked" look at the source: https://github.com/LineageOS/android_packages_overlays_Lineage
Curios i've had in those app a data collecting folder structure,
like db, files, and more, maybe a rootkit on my device???
I don't know, since i removed those my find7 works again really well,
what it didn't do since a long time in this year....
With best regards
Code looks fine and i'll recheck if the image was compromised or not or how, but later these days.
thank you for the quick hint to those files!
P.S.: I've dirty reflashed the image i used to install lineageOS, after the expected remove, and no these nightly seems not been compromised,
Sorry for the alert,
but in the last days many hacks occured in my private relationships with my dearest, so I was a little curios, but seems now clean on my device!
Thank You verry much,
and Kudos Kudos Kudos to your quick hint reply.
I just installed lineage-15.1-20180806-nightly-find7-signed.zip to replace my stock Oppo Find7 firmware on the weekend and after a few days with it, so far so good! I had to lose the LVM unfortunately, but I'd rather have an up to date OS.
The battery life seems shorter than the stock firmware. I can still get through the day, but down to 40 or 50% or less by 6PM instead of much more with the stock Oppo FW. I haven't tried tweaking any battery life settings yet though.
Two minor things with the install compared to the LineageOS howto - the SD card path was different to what was documented ( /internal_sd not /sdcard) , and I had to install open_gapps-arm-8.1-pico-20180812.zip (pico instead of the documented nano version)... but this was minor stuff and I got where I wanted to go.
Awesome. Thanks for this release. Everything (almost) works great. Feels like a new phone. Only video recording does not work. Any ideas ?
hexplor said:
Awesome. Thanks for this release. Everything (almost) works great. Feels like a new phone. Only video recording does not work. Any ideas ?
Click to expand...
Click to collapse
Video recording is now working on latest AOKP Rom for Find 7. Google is your friend.
knusto said:
Video recording is now working on latest AOKP Rom for Find 7. Google is your friend.
Click to expand...
Click to collapse
Wooot ! They have nougat builds for find 7
hexplor said:
Awesome. Thanks for this release. Everything (almost) works great. Feels like a new phone. Only video recording does not work. Any ideas ?
Click to expand...
Click to collapse
It will be fixed in next build.
mikeioannina said:
It will be fixed in next build.
Click to expand...
Click to collapse
Thank you so much. Can't wait
hexplor said:
Wooot ! They have nougat builds for find 7
Click to expand...
Click to collapse
AOKP is now on Oreo for Find 7
mikeioannina said:
It will be fixed in next build.
Click to expand...
Click to collapse
Got the latest build. All fine Thanks
Allthough its not supported i've got unified working. not reliable tho. the only way i got it working when flashing los and direct rebooting into recovery again and then flashing the cm-13.0-find7-unified-storage-patch.zip from the according thread. cuz the original link is dead incl mirror i got my copy uploaded to gdrive here. https://drive.google.com/file/d/1sZ72qUD5P7qL4tsIF3MB-cQk9x9pamRR/view?usp=sharing
only drawback being you cant reboot anymore cuz that will somehow give you the your-sdcard-is-****ed message. havent found a reasonable routine so i guess you'll have to try your luck yourself and maybe give feedback?
Hi, could you disable CABC(Content Adaptive Brightness Control) or provide a way to disable it? The hardware of Find 7 use it and it really makes some troubles, brightness, color. Really thanks if you have that time
I read that the problem of heavy games crashing on Bacon (Oneplus One) was resolved recently with this commit https://review.lineageos.org/#/c/LineageOS/android_device_oneplus_bacon/+/218799/
I have the same problem with the Oppo Find 7/s (i.e. heavy games are crashing). As this device has the same processor and RAM as that of the Bacon, is it possible to get the same fix for Find 7 as well?
Manas1796 said:
I read that the problem of heavy games crashing on Bacon (Oneplus One) was resolved recently with this commit https://review.lineageos.org/#/c/LineageOS/android_device_oneplus_bacon/+/218799/
I have the same problem with the Oppo Find 7/s (i.e. heavy games are crashing). As this device has the same processor and RAM as that of the Bacon, is it possible to get the same fix for Find 7 as well?
Click to expand...
Click to collapse
That commit has already been applied for Find7 - https://github.com/LineageOS/androi...mmit/80e1e7e5ffca2c69730eecc8c498423c2ea48463