YuanweiOS is based Candy7(Special thanks to Candy7 team).The main aim is to make ROM smooth and to add only necessary Features. We wanted to give the users a fun, fully customizable ROM. We will keep this ROM smooth and best in performance side and minimal on features side.
YuanweiOS Github
Disclaimer: We are not responsible for bricked devices, dead SD cards, thermonuclear war, or the current economic crisis caused by you following these directions. YOU are choosing to make these modificiations, andif you point your finger at me for messing up your device, I will laugh at you.
FEATURES
Battery bar
Multi-window
Status bar customization
Advanced power menu
Buttons settings:
-Long-press/double-tap actions
-Volume rocker
Brevent
Magsik
And so on ...
Flashing Steps:
Coming from another rom
1) Download YuanweiOS.zip
2) Download OpenGapps
3) Boot into recovery (TWRP)
4) Full wipe (Dalvik Cache, Cache, System, Factory Data Reset)
5) Flash YuanweiOS.zip
6) Flash Gapps
7) Reboot
Updating from previous YuanweiOS release
1) Download YuanweiOS.zip
2) Boot into recovery
3) Flash YuanweiOS.zip
4) Reboot
Special thanks to CandyRoms, LineageOS, SlimRoms, Omni, TeslaROM, and all the rest who make their source open. We can't do this on our own.
Webside
[ROM]YuanweiOS
ROM:
[ROM]YuanweiOS-kiwi
Contributors
jsbeyond,Yihao
Source Code:
https://github.com/yuanwei-os
https://github.com/yuanwei-os/android_device_huawei_kiwi/
https://github.com/yuanwei-os/android_kernel_huawei_kiwi/
Thanks: @crpalmer @BadDaemon
ROM OS Version: 7.1.2
ROM Kernel: Linux 3.1.x
Version Information
Status:Stable
Created 2017-07-18
Last Updated 2017-07-18
Welcome back Elan.
screenshots？
screenshots？
Devil_GBY said:
screenshots？
Click to expand...
Click to collapse
screenshots click on red screenshot option
Screenshots
@jsbeyond
Thanks for the UNHOLY.
Its running good on my L22 with a few glitches.
1. Not able to install modules (Viper & Atmos) from Magisk-13.0. Modules are downloaded though but I have flash them through TWRP only.
2. Not able to update Magisk from 13.0 to 13.2.
-Tried updating it, no success.
-Tried uninstalling the older version and installing newer version thru TWRP. The newer version installs but , After boot it does not load up.
subodhverma21 said:
@jsbeyond
Thanks for the UNHOLY.
Its running good on my L22 with a few glitches.
1. Not able to install modules (Viper & Atmos) from Magisk-13.0. Modules are downloaded though but I have flash them through TWRP only.
2. Not able to update Magisk from 13.0 to 13.2.
-Tried updating it, no success.
-Tried uninstalling the older version and installing newer version thru TWRP. The newer version installs but , After boot it does not load up.
Click to expand...
Click to collapse
i have no this issue
https://plus.google.com/communities/112720517052084764225
good job，thanks !
https://t.me/yuanweios
looks good but...
unholy development seriously? that is a bad boot animation, goes against my religion, definitely changing it.
other then that, the rom looks amazing!!! this might be my daily driver from now on.
Awesome
I like your ROM and have been using it for two weeks now. How or where can i get update to this ROM?
Thanks:good:
abolatito said:
I like your ROM and have been using it for two weeks now. How or where can i get update to this ROM?
Thanks:good:
Click to expand...
Click to collapse
seems like this ROM is abandoned...
crayonicle said:
seems like this ROM is abandoned...
Click to expand...
Click to collapse
OP is busy with real life. That explains it.
itisiryan said:
OP is busy with real life. That explains it.
Click to expand...
Click to collapse
well it's been like 2 or 3 months, I expected at least 1 update in that time, oh well, this was a good ROM as it was...
crayonicle said:
well it's been like 2 or 3 months, I expected at least 1 update in that time, oh well, this was a good ROM as it was...
Click to expand...
Click to collapse
Yeah. But he didn't update his other ROMs too.
itisiryan said:
Yeah. But he didn't update his other ROMs too.
Click to expand...
Click to collapse
oh ok
crayonicle said:
oh ok
Click to expand...
Click to collapse
But you can check his AFH account every now and then. I once saw him working on O.
itisiryan said:
But you can check his AFH account every now and then. I once saw him working on O.
Click to expand...
Click to collapse
omg thx so much for telling me, gonna try the LOS 15 unofficial O hope it works !
crayonicle said:
omg thx so much for telling me, gonna try the LOS 15 unofficial O hope it works !
Click to expand...
Click to collapse
Sadly it doesn't for the moment.
Related
Introduction
Sailfish OS is a mobile operating system combining the Linux kernel for a particular hardware platform use, the open-source Mer core middleware, a proprietary UI contributed by Jolla, and other third-party components.
Click to expand...
Click to collapse
This is a port of Sailfish OS to cancro (Xiaomi Mi3/Mi4), based on CyanogenMod 12.1.
What Works: https://wiki.merproject.org/wiki/Adaptations/libhybris#Smartphones (Check Xiaomi Mi3)
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Whats new:
Updated to Sailfish 2.1.3.7
Click to expand...
Click to collapse
Known issues:
1) Wifi mac address not detected properly
Click to expand...
Click to collapse
Current TODOs: Sailfish OS on cancro's Trello Board
Download links:
Cyanogenmod 12.1 base: https://www.androidfilehost.com/?fid=529152257862691291 (Mirroring this, as CM servers are shutting down)
Sailfish OS rootfs: https://www.androidfilehost.com/?fid=817906626617953262
Click to expand...
Click to collapse
Installation Instructions:
NOTE: This release is also available as an OTA to existing users.
1) Make sure your device has the new partition layout needed for Android M and a custom recovery. Boot to Recovery, wipe cache, dalvik-cache, system and data. ( https://jrizzoli.github.io/dotfiles/ )
2) First install cm-12.1-20151117-SNAPSHOT-YOG7DAO1K6-cancro.zip As your base ROM, and make sure it works well.
3) Then Install sailfishos-cancro-release-2.1.3.7-beta.zip on top of it. This will replace your boot image with sailfish boot image, and installs sailfish os to /data/.stowaways/sailfishos . The installation can take a little while, so be patient.
If you are already running, CM12.1 YOG7D/already have SailfishOS installed, you can simply flash the Sailfish OS without wiping flash/partition.
Click to expand...
Click to collapse
Big kudos to @mixmoto and Nokius, for patiently testing this release over and over.
P.S Thank you all for your support. I really really appreciate it - and it's what motivated me to make some time in my busy days to create this release. Wish you all Happy Holidays!
XDA:DevDB Information
Sailfish OS for cancro, ROM for the Xiaomi Mi 3
Contributors
saidinesh5, Ar4er, Folks at #sailfishos-porters, especially @mal-
Source Code: https://github.com/CancroSailors
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Must have CM12.1-YOG7D
Based On: CyanogenMod 12.1-YOG7D
Version Information
Status: Alpha
Created 2016-09-15
Last Updated 2018-01-07
Hey Dinesh,
Thanks for your work,
does this have sfdroid support?
Ekril said:
Hey Dinesh,
Thanks for your work,
does this have sfdroid support?
Click to expand...
Click to collapse
Hey, Nope. SFDroid support is on my TODO list for now.
It may take a while though. I need a Multirom working with CM13.0(which is my primary ROM), so I can safely port all the needed changes for SFDroid to my CM12.1 base without losing all my data. Any help welcome here!
Cheers
saidinesh5 said:
Hey, Nope. SFDroid support is on my TODO list for now.
It may take a while though. I need a Multirom working with CM13.0(which is my primary ROM), so I can safely port all the needed changes for SFDroid to my CM12.1 base without losing all my data. Any help welcome here!
Cheers
Click to expand...
Click to collapse
Thank you!!! this is awesome!!
Almost everything it seems to be working :good:
Is it stable for daily use?
Rocketval said:
Thank you!!! this is awesome!!
Almost everything it seems to be working :good:
Is it stable for daily use?
Click to expand...
Click to collapse
Great!
Right now i don't think it's ready for daily use yet, as sometimes my device's sensors and audio stop working randomly. Not sure if it is just my device though (because of some weird hacks I've been using).
I suspect this maybe because the CM 12.1 zip i was using to boot differs from the sources I've used to compile this rom. Once that issue is fixed, i think this will be usable for daily use. Camera works, Browser works, basic apps work.. And compiling that cm 12.1 means even sfdroid will work ...
saidinesh5 said:
Great!
Right now i don't think it's ready for daily use yet, as sometimes my device's sensors and audio stop working randomly. Not sure if it is just my device though (because of some weird hacks I've been using).
I suspect this maybe because the CM 12.1 zip i was using to boot differs from the sources I've used to compile this rom. Once that issue is fixed, i think this will be usable for daily use. Camera works, Browser works, basic apps work.. And compiling that cm 12.1 means even sfdroid will work ...
Click to expand...
Click to collapse
For what I know only few cm12 builds worked fine when flashed before sfos..
Maybe you need another build.. I don't know..
Rocketval said:
For what I know only few cm12 builds worked fine when flashed before sfos..
Maybe you need another build.. I don't know..
Click to expand...
Click to collapse
Could be. Most bugs i had to fix last week were because of differing versions too. That's why I'm trying to compile a cm12.1 right now.
Also right now as I'm on CM13.0, i was just using a system.img from the CM12.1.zip.. And making sailfish loop Mount that as the actual /system/ . not sure if that's causing any issues.
Right now my options are port multirom to CM13.0 (having some weird errors there) or wipe my device clean and downgrade to CM12.1 (have been trying to avoid this for months now!).
saidinesh5 said:
Could be. Most bugs i had to fix last week were because of differing versions too. That's why I'm trying to compile a cm12.1 right now.
Also right now as I'm on CM13.0, i was just using a system.img from the CM12.1.zip.. And making sailfish loop Mount that as the actual /system/ . not sure if that's causing any issues.
Right now my options are port multirom to CM13.0 (having some weird errors there) or wipe my device clean and downgrade to CM12.1 (have been trying to avoid this for months now!).
Click to expand...
Click to collapse
Yeah, we definetely need multirom, with 64gb mi4w I have more than 32+ free and a lot of will to try
Thank bro
Thank you!!!
As a temporary fix for radio, pulseaudio could be restarted, NOT as root.
Code:
systemctl restart pulseaudio --user
adeen-s said:
As a temporary fix for radio, pulseaudio could be restarted, NOT as root.
Code:
systemctl restart pulseaudio --user
Click to expand...
Click to collapse
I currently use this command everytime i wanted the FM radio to work. I will have to look into why this is failing by default though
Code:
$pactl set-source-port source.primary input-fm_rx
i cant undersatand for what need to flash cm-12.1? I cant flash clean sailfish.zip?
UPD can i flash gapps and supersu?
Dr. Ramm said:
i cant undersatand for what need to flash cm-12.1? I cant flash clean sailfish.zip?
UPD can i flash gapps and supersu?
Click to expand...
Click to collapse
this isn't android, you cannt flash gapp
Dr. Ramm said:
i cant undersatand for what need to flash cm-12.1? I cant flash clean sailfish.zip?
UPD can i flash gapps and supersu?
Click to expand...
Click to collapse
Due to legal reasons, Sailfish OS doesn't bundle the proprietary blobs(device drivers, system libraries etc..) provided by the phone vendors in it's zip.
As I have compiled Sailfish OS using sources from CM-12.1, it tries to access these proprietary files on your device via. CM-12.1 libraries. That's why you have to flash a CM-12.1 zip first, before flashing Sailfish OS. (i.e just clean flashing sailfish.zip won't work)
As of now, you don't have to flash gapps, as there is no way to use them from Sailfish OS. Once we get sfdroid running, we can run Android apps from within Sailfish OS, then you can flash gapps if you want.
Sailfish OS already comes with an su binary (accessed via. devel-su command) and full root access. So, you won't need Super SU.
saidinesh5 said:
As I have compiled Sailfish OS using sources from CM-12.1, it tries to access these proprietary files on your device via. CM-12.1 libraries. That's why you have to flash a CM-12.1 zip first, before flashing Sailfish OS. (i.e just clean flashing sailfish.zip won't work)
Click to expand...
Click to collapse
got it
saidinesh5 said:
As of now, you don't have to flash gapps, as there is no way to use them from Sailfish OS. Once we get sfdroid running, we can run Android apps from within Sailfish OS, then you can flash gapps if you want.
Click to expand...
Click to collapse
Stock market not working (as u say in 1st post) but how i can install some apps?
saidinesh5 said:
Sailfish OS already comes with an su binary (accessed via. devel-su command) and full root access. So, you won't need Super SU.
Click to expand...
Click to collapse
nice
run very smooth on my mi3
Dr. Ramm said:
got it
Stock market not working (as u say in 1st post) but how i can install some apps?
nice
Click to expand...
Click to collapse
You can use https://openrepos.net/content/basil/warehouse-sailfishos app to install apps.. I will include this in the zip for the next build (Which will soon be available).
First enable installation of untrusted software in Settings, then download the latest rpm of that from your browser and install it.
saidinesh5 said:
You can use https://openrepos.net/content/basil/warehouse-sailfishos app to install apps.. I will include this in the zip for the next build (Which will soon be available).
First enable installation of untrusted software in Settings, then download the latest rpm of that from your browser and install it.
Click to expand...
Click to collapse
can u tll me where located screenshots and how i can upload it on pc
some screens is here
after turn off mi3 10s, i dont turn on device
I present you:
OmniROM nightlies. These are unofficial and not supported by the omnirom team.
So have fun. Reply with any bugs that aren't related to the omni team itself. Thanks.
DISCLAIMER:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Installation:
First time flash/install:
1. Download zip file (ROM)
2. Perform a backup of your current ROM if you'd like.
3. Wipe data/factory reset.
4. Flash ROM zip file.
5. Flash gApps.
6. Flash SuperSU if you'd like root.
7. Reboot.
Updating builds:
1. Download zip file (ROM)
2. Perform a backup of your current ROM if you'd like.
3. Flash ROM zip file (dirty flash works fine)
4. Flash SuperSU if you'd like root.
5. Reboot.
Recovery: TWRP
ROM: https://www.androidfilehost.com/?w=files&flid=155480
gApps: http://opengapps.org/
ARM64 7.1 nano
Root (optional): SuperSU SR3 v2.79
http://download.chainfire.eu/1021/Su...0114223742.zip
Known Issue/Bugs: Bugs?
Please post logs in the official thread on XDA.
Source: https://github.com/omnirom
Kernel: https://github.com/omnirom/android_kernel_nextbit_msm8992
Device: https://github.com/omnirom/android_device_nextbit_ether
Credits:
omnirom Team (http://www.omnirom.org)
AFH is down for uploading right now. Give me about an hour and this should be uploaded. Today's first build is done, so I'm just waiting on AFH.
First build is up on AFH. Let me know what you think.
dpryor88 said:
First build is up on AFH. Let me know what you think.
Click to expand...
Click to collapse
Can you say in what it differs from the Official version?
pintasmapila said:
Can you say in what it differs from the Official version?
Click to expand...
Click to collapse
It's nightly. Just going to have more recent commits than the latest official weekly until the next weekly is released. It's just for fun I guess. You don't have to try, I just figured I'd put it online if others want to give it a shot. I'm running it and it runs fine.
Are you planning on adding in features, navigation bar tweaks or anything like that?
Can you confirm if active fingerprint sensor (no need to press button when locked) works and isn't buggy? Navigation Bar tweaks?
@dpryor88 make sure you explicitly state that users CANNOT CANNOT CANNOT switch between this and the OFFICIAL builds without a full wipe.
Furthermore, if anyone running these unofficial builds starts submitting bug reports, I'm going to be very annoyed.
jimmyzyx said:
Can you confirm if active fingerprint sensor (no need to press button when locked) works and isn't buggy? Navigation Bar tweaks?
Click to expand...
Click to collapse
It's not buggy on the official builds. You're placing your finger on the button/sensor wrong.
Gandalf said:
[MENTION=7053342]
It's not buggy on the official builds. You're placing your finger on the button/sensor wrong.
Click to expand...
Click to collapse
I don't mean the sensor itself... I mean the "wake and unlock" feature. It's supposed to pick up the finger without needing to press the button, and it does that at times right after it's been locked. However if you leave it locked for a period of time, and try to unlock it with the sensor, it wouldn't pick it up.
Gandalf said:
@dpryor88 make sure you explicitly state that users CANNOT CANNOT CANNOT switch between this and the OFFICIAL builds without a full wipe.
Furthermore, if anyone running these unofficial builds starts submitting bug reports, I'm going to be very annoyed.
It's not buggy on the official builds. You're placing your finger on the button/sensor wrong.
Click to expand...
Click to collapse
Isn't that all a given? I stated that they're unofficial nighties. That should be sufficient.
jimmyzyx said:
I don't mean the sensor itself... I mean the "wake and unlock" feature. It's supposed to pick up the finger without needing to press the button, and it does that at times right after it's been locked. However if you leave it locked for a period of time, and try to unlock it with the sensor, it wouldn't pick it up.
Click to expand...
Click to collapse
Try this... Settinvs->Apps->Gear icon->Special Access->Battery Optimization and then select the drop down menu then find Device Features and set it to Don't Optimize.
I've found this fixes my issue with the active scanning.
dpryor88 said:
Isn't that all a given? I stated that they're unofficial nighties. That should be sufficient.
Click to expand...
Click to collapse
Common sense is not so common.
Saythis said:
Try this... Settinvs->Apps->Gear icon->Special Access->Battery Optimization and then select the drop down menu then find Device Features and set it to Don't Optimize.
I've found this fixes my issue with the active scanning.
Common sense is not so common.
Click to expand...
Click to collapse
It made it slightly better, but after being locked for a couple of minutes, it still doesn't work unless i press the button... not a big deal but just thought i might raise it
jimmyzyx said:
It made it slightly better, but after being locked for a couple of minutes, it still doesn't work unless i press the button... not a big deal but just thought i might raise it
Click to expand...
Click to collapse
Hmm... Yeah that is odd. Mine seems to do it sometimes intermittently after a reboot. I have found that after a clean flash that clearing the data and cache for Device Features seemed to also make it function more normally.
Saythis said:
Hmm... Yeah that is odd. Mine seems to do it sometimes intermittently after a reboot. I have found that after a clean flash that clearing the data and cache for Device Features seemed to also make it function more normally.
Click to expand...
Click to collapse
Will try that with the next build. Thanks for your responses!!
New build up. I guess that Gandalf guy got the thread moved. That dude has too much time on his hands apparently
dpryor88 said:
New build up. I guess that Gandalf guy got the thread moved. That dude has too much time on his hands apparently
Click to expand...
Click to collapse
Nah, just a proper dev who wants his work respected and not confused with anothers.
dpryor88 said:
New build up. I guess that Gandalf guy got the thread moved. That dude has too much time on his hands apparently
Click to expand...
Click to collapse
#facepalm
Gandalf said:
#facepalm
Click to expand...
Click to collapse
hey Gandalf, The download link is broken. I'm not sure if we are supposed to wait for some more to download the latest build. If it's so, i'm sorry for that...I'll be patient
andromuks said:
hey Gandalf, The download link is broken. I'm not sure if we are supposed to wait for some more to download the latest build. If it's so, i'm sorry for that...I'll be patient
Click to expand...
Click to collapse
This isn't an official Omni ROM build... This also isn't Gandalfs thread... Thought that would be obvious lol.
Saythis said:
This isn't an official Omni ROM build... This also isn't Gandalfs thread... Thought that would be obvious lol.
Click to expand...
Click to collapse
My appologies...<br>
People are reporting that your version has got better performance and SOT than most of the others so just wanted to download and try this one and found that I link isn't working. Do we have any alternate link? or we are supposed to wait more? ( either works for us as we have best developers like you ).. .
Code:
[COLOR="Purple"]#include <std_disclaimer.h>[/COLOR]
[COLOR="Navy"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/COLOR]
Installation:
If you are on stock OS, you need a custom recovery first. You can get the recommended TWRP recovery in the official installation instructions link below.
If you are coming from stock or other ROMs, you need to make a factory reset.
As always, make sure to backup before installing this ROM.
Download link:
LineageOS Downloads[2018-06-13]
Recommended Google Apps package:
Open GApps (choose the variant you want)
Changelog:
2018-06-07
Merged with latest security patches
Imported Xiaomi Doze
New Live Display Hal Implementation
Widevine DRM lib from Pixel 2
Much More For U to Find Out...
Changelog:
NFC :We Dont Support It Yet
Proximity:as same as all aosp roms
Bug reports:
How to submit a bug report
LineageOS JIRA
Donate to support development:
XDA:DevDB Information
Lineage OS 15.1, ROM for the Samsung Galaxy J7
Contributors
Exyking, Exyking, Exynos7870DevTeam
Source Code: https://github.com/Exynos7870/android_kernel_samsung_exynos7870
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: 3.2.1 TWRP
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2018-06-07
Created 2018-05-02
Last Updated 2018-06-07
CHANGELOG:::
13/06/18 Build Changes
Fixed incall Pxoximity
added Some source changes required for Lineage
Synced to Latest Source
Kernel Upsreamed To Latest 3.18.12
Updated Aosp Audio Policy
More I dont remember
FOR LINKS SEE OP [First Post]
HELP US TO HELP U
Get Logs If U Find Bugs While U Report
We Dont Support bug reports If u Alter System Stuffs Or modiy Kernel in Ur Way
Liked It,Loved iT ont say Thanks Press the Thanks Button Down
Or A Small Donation As A Token Of Appreciation........
again
Thx bhai. Cool
Nice work bro, could we see some screenshot as well. :good:
Hello can you install it in the J710MN variant? another thing that brings back improvements and more? Thank you
Can I flash it as an update of the already existing LOS 15.1 for this device or should I do a clean flash?
PepeNacho said:
Can I flash it as an update of the already existing LOS 15.1 for this device or should I do a clean flash?
Click to expand...
Click to collapse
Use titanium backup and then do a clean format and restore your apps and their data.
Nice job tnx, keep up the good work! btw, is this official or still unofficial, please confirm, regards
edcarsky said:
Nice job tnx, keep up the good work! btw, is this official or still unofficial, please confirm, regards
Click to expand...
Click to collapse
It is not official, I flashed it yesterday and seen it myself..
Can Iflash this rom in my j710fn?
vaibhavsandbhor said:
Can Iflash this rom in my j710fn?
Click to expand...
Click to collapse
Yes you can.
argenmu09 said:
Hello can you install it in the J710MN variant? another thing that brings back improvements and more? Thank you
Click to expand...
Click to collapse
Did you try installing it? I have the MN variant too.
gabyzen said:
Did you try installing it? I have the MN variant too.
Click to expand...
Click to collapse
Yes, you can. It works for me.
gabyzen said:
Did you try installing it? I have the MN variant too.
Click to expand...
Click to collapse
Just flash the WiFi fix, and you're good to go.
Androkai said:
Just flash the WiFi fix, and you're good to go.
Click to expand...
Click to collapse
PepeNacho said:
Yes, you can. It works for me.
Click to expand...
Click to collapse
Thanks! After dinner i will install it
i got error 7 on twrp 3.2.1. I did factory reset and wipe system. Coming from RR 5.8.5 j7xelte. i'm missing something? sorry my english
gabyzen said:
i got error 7 on twrp 3.2.1. I did factory reset and wipe system. Coming from RR 5.8.5 j7xelte. i'm missing something? sorry my english
Click to expand...
Click to collapse
i faced it too , follow this guide to fix it , i found it on youtube https://www.youtube.com/watch?v=CICECa1v77g
---------- Post added at 04:31 PM ---------- Previous post was at 04:30 PM ----------
AbboodSY said:
Yes you can.
Click to expand...
Click to collapse
hi bro , please could you tell me if this rom i suitable for daily use ?? how is the rom so far ?? thank you
I tested it for almost two days, I think. Frankly, I prefer the other LOS15.1 out there. To me, this one was more laggy, but I don't know if it will be the same to you. Only the two LOS rom made LTE work for me and the only bug I found in both was frontal flash. Still, I think both are great, but I stick to the other one
Code:
[COLOR="Purple"]#include <std_disclaimer.h>[/COLOR]
[COLOR="Navy"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/COLOR]
Installation:
If you are on stock OS, you need a custom recovery first. You can get the recommended TWRP recovery in the official installation instructions link below.
If you are coming from stock or other ROMs, you need to make a factory reset.
As always, make sure to backup before installing this ROM.
More detailed instructions at:
Install LineageOS on find7
Download link:
LineageOS Downloads
Recommended Google Apps package:
Open GApps (choose the variant you want. Recommended nano package)
Official root addon
LineageOS Extras
Changelog:
Changes for find7
Bug reports:
How to submit a bug report
LineageOS JIRA
Donate to support development:
Donate via PayPal to mikeioannina
Donate via PayPal to LineageOS
XDA:DevDB Information
Official LineageOS 15.1 for Find7a/s, ROM for the Oppo Find 7
Contributors
mikeioannina
Source Code: https://github.com/LineageOS
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Any version of ColorOS. Unified storage not supported.
Based On: LineageOS
Version Information
Status: Nightly
Created 2018-07-09
Last Updated 2018-11-15
Just curious. Are there any way for find 7 to install nano gapps? I keep on getting insufficient storage... Sad...
Am having problem of cold start gps. Takes about 8-10 mins before locking in. However, once lock in,everything work perfectly.
Updated on 18july.now everything is perfect. Even the battery life got better.
thank you???
luckywang95 said:
Just curious. Are there any way for find 7 to install nano gapps? I keep on getting insufficient storage... Sad...
Click to expand...
Click to collapse
You can delete the storage check in the installer script. Did it before and worked fine. I'm gonna try it tonight with this build.
Update: Stucked in bootloop. Gonna try tommorow again.
Update#2: Here is my working solution:
1. Flashing rom
2. Flashing addonsu
3. Flashing openGapps micro
Whats the perception about the Lineage<color>Accent.apks ?
They seemed to compromise my device and after removing these system aps
my find7 starts twice as fast as before.
In Settings->Apps they are all active but do nothing and their names are renamed like kakao lavendel kirsche carbon...
I'dont know whats this about,
but I feel Hacked and compromised by these apks!
Please explain what these apks are good for
and why it is stated in Settings->Apps that they do nothing else as being in background active
nor is anything protokollised from their activity!
I did a clean fresh install with these Custom Rom,
wiping all partitions and installing them with TWRP 3.2.2.0
With best regards Zoltan-X
P.S.: Find7 works better without these and no Errors are caused in usage so far!!!
Zoltan-X said:
Whats the perception about the Lineage<color>Accent.apks ?
They seemed to compromise my device and after removing these system aps
my find7 starts twice as fast as before.
In Settings->Apps they are all active but do nothing and their names are renamed like kakao lavendel kirsche carbon...
I'dont know whats this about,
but I feel Hacked and compromised by these apks!
Please explain what these apks are good for
and why it is stated in Settings->Apps that they do nothing else as being in background active
nor is anything protokollised from their activity!
I did a clean fresh install with these Custom Rom,
wiping all partitions and installing them with TWRP 3.2.2.0
With best regards Zoltan-X
P.S.: Find7 works better without these and no Errors are caused in usage so far!!!
Click to expand...
Click to collapse
Are you serious? These are just simple apks for the styles you can change from display settings.
If you are so curious about "being hacked" look at the source: https://github.com/LineageOS/android_packages_overlays_Lineage
Curios i've had in those app a data collecting folder structure,
like db, files, and more, maybe a rootkit on my device???
I don't know, since i removed those my find7 works again really well,
what it didn't do since a long time in this year....
With best regards
Code looks fine and i'll recheck if the image was compromised or not or how, but later these days.
thank you for the quick hint to those files!
P.S.: I've dirty reflashed the image i used to install lineageOS, after the expected remove, and no these nightly seems not been compromised,
Sorry for the alert,
but in the last days many hacks occured in my private relationships with my dearest, so I was a little curios, but seems now clean on my device!
Thank You verry much,
and Kudos Kudos Kudos to your quick hint reply.
I just installed lineage-15.1-20180806-nightly-find7-signed.zip to replace my stock Oppo Find7 firmware on the weekend and after a few days with it, so far so good! I had to lose the LVM unfortunately, but I'd rather have an up to date OS.
The battery life seems shorter than the stock firmware. I can still get through the day, but down to 40 or 50% or less by 6PM instead of much more with the stock Oppo FW. I haven't tried tweaking any battery life settings yet though.
Two minor things with the install compared to the LineageOS howto - the SD card path was different to what was documented ( /internal_sd not /sdcard) , and I had to install open_gapps-arm-8.1-pico-20180812.zip (pico instead of the documented nano version)... but this was minor stuff and I got where I wanted to go.
Awesome. Thanks for this release. Everything (almost) works great. Feels like a new phone. Only video recording does not work. Any ideas ?
hexplor said:
Awesome. Thanks for this release. Everything (almost) works great. Feels like a new phone. Only video recording does not work. Any ideas ?
Click to expand...
Click to collapse
Video recording is now working on latest AOKP Rom for Find 7. Google is your friend.
knusto said:
Video recording is now working on latest AOKP Rom for Find 7. Google is your friend.
Click to expand...
Click to collapse
Wooot ! They have nougat builds for find 7
hexplor said:
Awesome. Thanks for this release. Everything (almost) works great. Feels like a new phone. Only video recording does not work. Any ideas ?
Click to expand...
Click to collapse
It will be fixed in next build.
mikeioannina said:
It will be fixed in next build.
Click to expand...
Click to collapse
Thank you so much. Can't wait
hexplor said:
Wooot ! They have nougat builds for find 7
Click to expand...
Click to collapse
AOKP is now on Oreo for Find 7
mikeioannina said:
It will be fixed in next build.
Click to expand...
Click to collapse
Got the latest build. All fine Thanks
Allthough its not supported i've got unified working. not reliable tho. the only way i got it working when flashing los and direct rebooting into recovery again and then flashing the cm-13.0-find7-unified-storage-patch.zip from the according thread. cuz the original link is dead incl mirror i got my copy uploaded to gdrive here. https://drive.google.com/file/d/1sZ72qUD5P7qL4tsIF3MB-cQk9x9pamRR/view?usp=sharing
only drawback being you cant reboot anymore cuz that will somehow give you the your-sdcard-is-****ed message. havent found a reasonable routine so i guess you'll have to try your luck yourself and maybe give feedback?
Hi, could you disable CABC(Content Adaptive Brightness Control) or provide a way to disable it? The hardware of Find 7 use it and it really makes some troubles, brightness, color. Really thanks if you have that time
I read that the problem of heavy games crashing on Bacon (Oneplus One) was resolved recently with this commit https://review.lineageos.org/#/c/LineageOS/android_device_oneplus_bacon/+/218799/
I have the same problem with the Oppo Find 7/s (i.e. heavy games are crashing). As this device has the same processor and RAM as that of the Bacon, is it possible to get the same fix for Find 7 as well?
Manas1796 said:
I read that the problem of heavy games crashing on Bacon (Oneplus One) was resolved recently with this commit https://review.lineageos.org/#/c/LineageOS/android_device_oneplus_bacon/+/218799/
I have the same problem with the Oppo Find 7/s (i.e. heavy games are crashing). As this device has the same processor and RAM as that of the Bacon, is it possible to get the same fix for Find 7 as well?
Click to expand...
Click to collapse
That commit has already been applied for Find7 - https://github.com/LineageOS/androi...mmit/80e1e7e5ffca2c69730eecc8c498423c2ea48463
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
What's new in 3.2.2-0:
</> CHANGELOG : ? </>
Code:
Code:
* adb backup fixes
* OTA style update zips will now install automatically without prompting for decrypt
* minor tweaks to handling date/time on Qualcomm devices
* updates to some language translations
</> DOWNLOAD ? </>
https://twrp.me
$ TIP $
You can update it from previous TWRP recovery if you already have it installed, else install it as fresh by using adb or Official TWRP Installer app from google play store or similar
To flash with Fastboot/Adb:
Code:
Code:
make sure OEM-Unlocking is ON
$ adb reboot bootloader
$ fastboot flash recovery twrp-3.2.2-0-woods.img
To contribute:
TWRP Code Review
TeamWin
XDAevDB Information
Moto E4 ROMs, Kernels, Recoveries, & Other Development
Contributors
iykeDROID™ {dumbDevpr*}
Source Code: https://github.com/TeamWin
Version Information
Status: Stable
Created: 2018-07-12
Last Updated: 2018-07-13
Great news. Now I'm waiting for stable and fully working Oreo ROM and start flashing.
ka4o_pi4a said:
Great news. Now I'm waiting for stable and fully working Oreo ROM and start flashing.
Click to expand...
Click to collapse
from the looks of things on my side, i don't think that will happen in anytime too soon.
let's just hope for a God sent dev to take over the Moto E4(woods) development .
if any bug with the TWRP, create/open an issue regarding such bug on GitHub :
https://github.com/omnirom/android_bootable_recovery
( make sure to see how other issues were created and follow such trend )
thanks
I am getting a wrong architecture error (error 64 in twrp) when trying to flash ARM gapps.
EstebanxZ said:
I am getting a wrong architecture error (error 64 in twrp) when trying to flash ARM gapps.
Click to expand...
Click to collapse
wait for next update or use this at your own risk
https://t.me/motoe4woods/12179
Same here. Wrong architecture. Even the backup was corrupted and I wasn't able to flash back my stock ROM. This is my last Motorola device.
ka4o_pi4a said:
Same here. Wrong architecture. Even the backup was corrupted and I wasn't able to flash back my stock ROM. This is my last Motorola device.
Click to expand...
Click to collapse
i used it to install Both XOSP & Gapps Pico today.
Few days ago I was spent my day on trying to flash some ROM, but didn't manage to flash any (Pico,nano, micro, etc) gapps... All finished with the same error 64. Then I install last beta of twrp and successfuly install gapps, but can't boot into system (boot into recovery every time).
ka4o_pi4a said:
Few days ago I was spent my day on trying to flash some ROM, but didn't manage to flash any (Pico,nano, micro, etc) gapps... All finished with the same error 64. Then I install last beta of twrp and successfuly install gapps, but can't boot into system (boot into recovery every time).
Click to expand...
Click to collapse
please your issues on that specific ROM's thread.
As far as i know, the TWRP recovery works fine even before the unofficial beta... woods has come to it's best so far.
thanks.
Already do that. Also try with two or three different ROMs and get the same error. Doesn't matter, I'LL wait for some more stable version of twrp and some ROM.
Tks
Thanks man!
Laruzzo said:
Hi, this TWRP version to Moto E4 woods is not good.
It does not install GAPPS, and do not install SUPER SU.
With GAPPS the error is about 64 bits version. And with supersu it says that "Bad recovery no Unzip."
I tried with a unnoficial version and worked everything.
Please update in TWRP site to a new version with bug fix.
Look a this thread with the version that worked with Moto E4 woods.
https://forum.xda-developers.com/mo...rp-3-1-1-r1-port-xt1760-t3772249/post76177524
Click to expand...
Click to collapse
Dude,
learn how to read a full post with instructions & proper way of reporting an issue anywhere you find yourself.
Know you device SoC, Architecture, etc ... don't just talk any how.
also, commits has not been merged
see on gerrit.twrp.me :=> https://gerrit.twrp.me/#/c/android_device_motorola_woods/+/63/
Finally, always check to see if no one has report similar issue and been solved before you start writing sh*t into the air
https://postimages.org/
https://forum.xda-developers.com/showpost.php?p=77250466&postcount=6
NOTE : MOTO E4 SERIES IS ARM(32bit) Architecture Device, stop trying to flash/install ARM64 Gapps as you stop being dumb.
OK
Ok, I´m sorry you are the developer and I should thanks for your great work. May you please share here the alternative file that works with gapps? Because I cannot access telegram at the momment. Thank you very much and sorry again if my words was not good. I respect and admire your work.
Laruzzo said:
Ok, I´m sorry you are the developer and I should thanks for your great work. May you please share here the alternative file that works with gapps? Because I cannot access telegram at the momment. Thank you very much and sorry again if my words was not good. I respect and admire your work.
Click to expand...
Click to collapse
Download ⍖ ?
TWRP-323.0-Unofficial-woods.img
iykeDROID™ said:
TWRP is an open source, community project.
..
..iykeDROID™[/URL] {dumbDevpr*}
Source Code: https://github.com/TeamWin
[/SIZE][...his other way cause I doubt about official ¿‽
Click to expand...
Click to collapse
Abish4 said:
Format Data Partition with F2FS format is not available which is usually available with every Moto Device Kernel
Click to expand...
Click to collapse
please deal with the kernel source here : https://github.com/MotorolaMobilityLLC/kernel-mtk/tree/nougat-7.1.1-release-woods
Abish4 said:
Can you help with this other way cause I doubt about official ¿‽
Click to expand...
Click to collapse
due to negligence, you couldn't check the source code here : https://github.com/TeamWin/android_device_motorola_woods
also check the twrp site : https://twrp.me/motorola/motorolamotoe4.html
I cannot flash gapps arm 7.1.x
Hi. I have one MotoE4 XT1763 Mediatek MT6735 with unlocked bootload.
would you recommend flashing the
twrp-3.2.3-0-woods.img 15.1M
Or the
TWRP-323.0-Unofficial-woods.img 15.5M
for the Lenovo Moto E4(XT1762)
?
Thank you peoples. TWRP unofficial working fine
Hey peoples. Accidentally i wiped my system. I have a backup in pc. I dont have sd card right now. How can i put the backup wich is in pc back to TWRP backup folder in order to restore ?