Develop Bugs

[Q] Stock ROMs flashing with Odin have errors

Hey guys ... I had a new GS3 from Samsung, so it had 4.3. I flashed a 4.1 stock ROM via Odin, but now when I turn on the phone, I get constant messages about various android processes failing and needing to be stopped. I have since tried another stock ROM and the same thing is happening. Does anyone have any idea what I should do? Maybe flash the latest stock ROM to go back to 4.3? I was trying to revert so I could root and flash a custom ROM but I can't do anything on this right now. I can get back into Download mode though. Please explain things as best as possible as, as you can tell, I clearly don't understand this.

I managed to use the root toolkit to install TWRP, but no custom roms I flash get past the boot screen. So I can get into TWRP and I can get into download mode. I have Odin and I'm not sure where to go from here.

[Q]Need clarification for rooted rogers note 2, android 4.4

Hello, I recently just updated my Rogers SGH-i317M to 4.3, which then downloaded a system update which put it at 4.4. I was running Jedi X20, which is based on 4.1.2, when I first tried updating, I flashed the "4.3param_tz" file in odin, and was left with an error screen saying I need to recover using Kies, so I downloaded the official release, flashed via odin, and thats how I got to where I am now. I want to try the "Ditto Note 3" rom, "Sky Note Air 4.3", "Mean Bean" and "Beanstalk". My main question is, can I just start flashing these roms like I was before on 4.1.2, or do I need to use the specific kernel listed on their page? Before you needed a specific kernel to run a touchwiz rom or an aosp rom, so is it still the same? Or can I use my stock 4.4 kernel and try both aosp and tw roms now? If so could you point out the kernels I would need? And educate me on anything else I should know about before flashing 4.3 and 4.4 roms, (I'm not worried about warranty), this would be greatly appreciated. Thanks for your time in reading this and helping me out, much appreciated!!

Regardless of where u are, I'd Odin to Rogers stock KK 4.4.2. Then Odin Twrp recovery, boot into twrp recovery and flash SU v.1.99. Finally choose your rom and flash away. This way you are on the lastest KK 4.4.2 Bootloader and KK Modem/Baseband.

just_visiting said:
Regardless of where u are, I'd Odin to Rogers stock KK 4.4.2. Then Odin Twrp recovery, boot into twrp recovery and flash SU v.1.99. Finally choose your rom and flash away. This way you are on the lastest KK 4.4.2 Bootloader and KK Modem/Baseband.
Click to expand...
Click to collapse
I did all that except flash SU 1.99, so I tried flashing SKynote Air and it didnt work, upon restarting my phone it said no os is available. So I tried restoring from the backup I made of the official 4.4.2 Samsung rom in twrp, didn't work. Tried Odin, didn't work. Then I tried flashing the Skynote rom again and it worked. So I'm afraid of flashing any other roms now.

[Q] Wrong Kernel flashed

Hey there,
recently, I pulled a really noob move - I flashed an i-9505 kernel (stock, plus recovery) on an i-9195 phone.
I had just flashed both phones a few days apart from each other and obviously,
something with the folders on my PC (or in my head^^) went wrong...
So, in short I have a phone right now, which wouldnt start and could not be flashed either by Odin
or via recovery. I have flashed serranoltexx recovery, Odin says "Pass", but I couldnt start it,
the screen says something about Image size being too large and shows "Secure Fail:Kernel".
Download mode does work, though.
Does anybody have a stock kernel for the 9195 variant? Since I couldnt flash via recovery,
I would prefer a tar.md5 file.
Or are there any other solutions to my problem?

AtzeOnAcid said:
Hey there,
recently, I pulled a really noob move - I flashed an i-9505 kernel (stock, plus recovery) on an i-9195 phone.
I had just flashed both phones a few days apart from each other and obviously,
something with the folders on my PC (or in my head^^) went wrong...
So, in short I have a phone right now, which wouldnt start and could not be flashed either by Odin
or via recovery. I have flashed serranoltexx recovery, Odin says "Pass", but I couldnt start it,
the screen says something about Image size being too large and shows "Secure Fail:Kernel".
Download mode does work, though.
Does anybody have a stock kernel for the 9195 variant? Since I couldnt flash via recovery,
I would prefer a tar.md5 file.
Or are there any other solutions to my problem?
Click to expand...
Click to collapse
What version of rom u have now ?
KitKat or JB ?
If Kitkat try this and see
If not just try to flash a full firmware from sammobile.
From error u got, Knox is active and tripped on your phone
And u also need a new recovery U can flash Phillz touch
Both files u can flash with Odin

SilviuMik said:
What version of rom u have now ?
KitKat or JB ?
If Kitkat try this and see
If not just try to flash a full firmware from sammobile.
From error u got, Knox is active and tripped on your phone
And u also need a new recovery U can flash Phillz touch
Both files u can flash with Odin
Click to expand...
Click to collapse
Thanks for the quick reply.
I will have a look into it this evening and report then...

So, I flashed the kernel and recovery and had no success so far.
Odin shows pass, though.
I was originally on 4.2.2 but decided then to flash some CM -
I am not sure anymore if it was 11, since I acted mostly in time pressure and out of desparation -
which worked quite fine. Since my friend, who wants to buy the phone, didnt want any modifications,
I tried to get back to stock.
After some different (and quite frankly useless) attempts, I read something about being on
KitKat and never going to return to lower versions. Too late for me...Could this be a problem?
So, no success with the KitKat kernel, is there the necessity to try a stock firmware?
I have tried so many before...

AtzeOnAcid said:
So, I flashed the kernel and recovery and had no success so far.
Odin shows pass, though.
I was originally on 4.2.2 but decided then to flash some CM -
I am not sure anymore if it was 11, since I acted mostly in time pressure and out of desparation -
which worked quite fine. Since my friend, who wants to buy the phone, didnt want any modifications,
I tried to get back to stock.
After some different (and quite frankly useless) attempts, I read something about being on
KitKat and never going to return to lower versions. Too late for me...Could this be a problem?
So, no success with the KitKat kernel, is there the necessity to try a stock firmware?
I have tried so many before...
Click to expand...
Click to collapse
I think your only bet is to try a stock kitkat rom unmodified ...

SilviuMik said:
I think your only bet is to try a stock kitkat rom unmodified ...
Click to expand...
Click to collapse
Will do...

Thank you so much man, it worked!
Phone is back to stock now, so my friend gotta deal with having an unrooted phone with KitKat
Thanks again and have a nice one!

[Q] i317 still on 4.1.2... :( SOLVED!

my work requires encryption. i was on slimkatv22 at the time and had to encrypt. as encryption kept failing, i went back to stock. way back to stock.
so i'm running
JZO54K.I317UCAMH3 ROM
TEAMWIN Recovery
I317UCUCNE5 Bootloader
with Root and Busybox installed.
everytime i try to update via device update, it downloads, reboots and runs TWRP, I decrypt using password, reboots and the update fails with "Update Interrupted" message.
Is there a way to update ROM and keep encryption?

You can't OTA stock ROMs without stock recovery.

xBkKx said:
You can't OTA stock ROMs without stock recovery.
Click to expand...
Click to collapse
Thanks for your response. I tried updating ROM via ODIN and was not successful. Always got stuck in boot logo after i flashed new ROM.
Is there a stock recovery I should flash over TWRP to try?
Thanks for your help.

I have never used encryption so I can't really help if there are specifics around that. What exactly are you trying to install through Odin? If it's the firmware such as THIS it should overwrite the custom recovery with the stock one. If the stock ROM isn't booting you might have to boot into recovery and factory reset/wipe dalvik cache. This is my first Samsung phone so if nothing helps someone else who'd like to offer their assistance would probably be more knowledgeable.

I was going back to stock, which I guess, was mostly successful. however, I've not been able to install new ROM, namely 4.4.2 I317UCUCNE5. so if I install from your link, that should overwrite custom recovery and allow me to upgrade to 4.4.2 ROM either OTA or via Odin?

Maybe? Using the OTA always tells me there isn't an update (cause I'm on T-Mobile I guess?) and I haven't seen any files to update to Kitkat firmware through Odin

http://forum.xda-developers.com/showthread.php?t=2618447
i'm going to try this.
thanks,

miserly said:
http://forum.xda-developers.com/showthread.php?t=2618447
i'm going to try this.
thanks,
Click to expand...
Click to collapse
haven't had time to try. tbutbut i noticed that foxfi doesn't work even though i'm rooted. i searched for tether and doesn't seem to be a working solution for a free app.

SOLVED
finally got around to following the directions from dicksteele and voila! i'm on 4.4.2!
thanks all!
m

Noob Question. Sorry.

Hello Guys. Need a little help. Have a rooted Note 2 i317 (At&t) that had a custom rom but I wiped with the recovery on it which was TWRP 2.4.3.0. Now I tried putting the NOTE 4 rom for the model I have but it won't take. Again I have TWRP 2.4.3.0. the only rom I can get to work so far is Slimbean 4.3. Is there any thread were it gives me required files for updating the rom. I have tried updating kernel and other stuff but the only rom that works without a problem is Slimbean 4.3 with the Gapp 4.3 pack.
Any help would be greatly appreciated. I know I f'd up by wiping without having full understanding but I've been away from Rooting since the older sammy's from Metro.
Also tried updating TWRP with the App and it gave me a notice saying "Something is wrong!" but it has version 2.8.7.0 on it at least that's what it says. IDKWTF happened. Please help. Going nuckin futs.
UPDATE: Got it figures out guys. Used another computer and everything is good. Used TWRP and Installed another version and performed a return to stock and started fresh. ALLGOOD. Thanks anyways.