Develop Bugs

[Q] Official 4.3 Upgrade Issues

I was on stock, un-rooted firmware version MD5. Went ahead with the official 4.3 upgrade through KIES. Don't like it, want to go back to stock MD5. Trying to ODIN back with official FW file (not the first time I've used this) and when I start, it fails and what is weird is that it appears the bootloader is changed as well from the 4.3 update. It has 2 new lines in the upper left corner (Warranty Bit: 0 and BOOTLOADER RP SWREV: 1) Now, once the ODIN failed, another line, in all red letters on the download screen underneath those previous mentioned lines, states
SW REV CHECK FAIL : Fused 1 > Binary 0. Any ideas? Phone works 100% on this new 4.3 from TMO, just cant seem to ODIN back to 4.1.2. Any help would be super. Thanks!

phoenix98 said:
I was on stock, un-rooted firmware version MD5. Went ahead with the official 4.3 upgrade through KIES. Don't like it, want to go back to stock MD5. Trying to ODIN back with official FW file (not the first time I've used this) and when I start, it fails and what is weird is that it appears the bootloader is changed as well from the 4.3 update. It has 2 new lines in the upper left corner (Warranty Bit: 0 and BOOTLOADER RP SWREV: 1) Now, once the ODIN failed, another line, in all red letters on the download screen underneath those previous mentioned lines, states
SW REV CHECK FAIL : Fused 1 > Binary 0. Any ideas? Phone works 100% on this new 4.3 from TMO, just cant seem to ODIN back to 4.1.2. Any help would be super. Thanks!
Click to expand...
Click to collapse
Is not possible for right now, until devs will create a new root app or something like superSU or I don't know ! :crying: Same to me ...

Your Boot loader is probably secured.
Try Root66 image and get back to UVDMD5 Rooted. From there, use Doc Holiday's thread to get 4.3 upgrade.

As it stands, right now if you flashed the official firmware or OTA, you will not be able to Odin flash any previous firmware. Maybe if you were never rooted....
For now though, you shoukd still be able to flash cwm/twrp and flash another rom. you will be limited to the 4.3 modem, but otherwise should be ok to run a 4.1.2 rom.
We are working on it.
Sent from my T-Mobile MyTouch 3G Slide(HTC Espresso) using Tapatalk 2

I had the same problem
I just had this same problem and was lucky enough to fix it!!!!

vTizzle said:
I just had this same problem and was lucky enough to fix it!!!!
Click to expand...
Click to collapse
How/ What did you do you fix it? I'm stuck in a rut :l

I was trying to few things. But essentially I was trying to get back to a custom recovery so that I can flash a compatible rom. try flashing a recovery in Odin, stay away from the CWM. Flash to TW RP or something like that. I will try to help out more as soon as I get to my laptop
Sent from behind you

vTizzle said:
I was trying to few things. But essentially I was trying to get back to a custom recovery so that I can flash a compatible rom. try flashing a recovery in Odin, stay away from the CWM. Flash to TW RP or something like that. I will try to help out more as soon as I get to my laptop
Sent from behind you
Click to expand...
Click to collapse
Hm... Interestingly enough it worked! I flashed CWM 6.3.0 though, sent me straight into stock hehe :good::good: Though I'm still curious how long until I can root it

Have you tried the auto root course??
Sent from behind you

Boot recovery, then reboot system. It should ssk if you want to root.
Better yet, flash one of our roms. Or, download the supersu zip file from chainfires thread. (Or in my sig, but its not up to date)
---------- Post added at 09:12 PM ---------- Previous post was at 09:11 PM ----------
There are several ways to root. But if you don't get rid of knox iits almost pointless.

Co-author root didn't work, and nor did Root66

I'm on the same boat
Same here,
Mine was rooted, then
I Updated to Factory 4.3
Same red letters and can't get it back,
I want to 'cause it's unstable and
it has weird partition, "emulated/0"
Any Help Please !!

This is why everyone should try to search for information on anything and everything before flashing it to your device. Even if its an official update.
As stated many, many times, once you flash the 4.3 update, you cannot flash older firmware again. Roms are ok, older firmware can brick you. Your weird folder is androids implementation of user profiles if I understand it right. May as well get used to it now, I don't think its going away.
And for those interested, the root66 firmware works fine now as far as I can tell.
If you experience instability, you need to factory reset.

DocHoliday77 said:
This is why everyone should try to search for information on anything and everything before flashing it to your device. Even if its an official update.
As stated many, many times, once you flash the 4.3 update, you cannot flash older firmware again. Roms are ok, older firmware can brick you. Your weird folder is androids implementation of user profiles if I understand it right. May as well get used to it now, I don't think its going away.
And for those interested, the root66 firmware works fine now as far as I can tell.
If you experience instability, you need to factory reset.
Click to expand...
Click to collapse
If I did softbrick it, is there anyway to restore it?

You can try first wiping just dalvik and cache, then try factory reset.

Other ROMs
DocHoliday77 said:
This is why everyone should try to search for information on anything and everything before flashing it to your device. Even if its an official update.
As stated many, many times, once you flash the 4.3 update, you cannot flash older firmware again. Roms are ok, older firmware can brick you. Your weird folder is androids implementation of user profiles if I understand it right. May as well get used to it now, I don't think its going away.
And for those interested, the root66 firmware works fine now as far as I can tell.
If you experience instability, you need to factory reset.
Click to expand...
Click to collapse
Thank you Doc , It has been said ..Over and over and over.. OTA 4.3 update means you cannot flash older firmware again! I was one of the lucky that waited and installed you ROM and it has been stable . I placed a few Mods like Apps For 4.3 TW
For those just refused to READ and have NOT done a OTA update to 4.3 Like DocHoliday77 and and many have said .. here goes one more time..
WARNING!!!
If you have NOT updated via the official firmware or OTA update, it is highly recommended that you do NOT do so at this time!
You can still run these roms and gain every advantage, with none of the problems!
There so many other 4.3 ROMs to play with DocHolidays, Sarahai, mrRobinson and now aamir123. . YOu just to READ before run in head first into the OTA.

I have been trying to keep up with all the 4.3 update stuff but its just so hard with 15 different threads and it being updated everyday. I stupidly updated OTA 4.3 before coming on here and reading and it blows! Samsung is stupid for releasing such a unpolished update. But besides the point, I have been having a problem with out going calls, and battery life. When I will press to call someone the call ends instantly and I have to restart phone for it to allow me to call out. Has anyone else had this problem?
Also, are we any closer to getting 4.3 rooted? I know developers are having problems with Knox etc? If not is there anything I can do to make this update better or do I just have to suck it up? Thanks for the help guys.
I alrdy talked to people at samsung and complained beyond belief, but I dont think the out sourced help desk person understood me.

I made it !!
How ?
1. Uninstall KNOX with Titanium.
2. Flash CWM twice (first one failed), Now I have CWM.
3. Download T999UVDMD5 (Deodexed)
4. Flash it via CWM.
5. Voilà !!
Now It has the partition as it comes from Factory !.
It's there a version similar to this one, running on Android 4.3 (Stock Deodexed, Without KNOX) ?

DocHoliday77 said:
You can try first wiping just dalvik and cache, then try factory reset.
Click to expand...
Click to collapse
So I have a question Doc, I know I posted about this in the CM11 unofficial thread as well, but I am running your Non-Knox, CiQ free version and I have CWM installed, and I'm perfectly rooted after I updated SuperSU from the Play Store, but when I try to CWM Flash a rom it throws an error about the ro.bootloader and it lists out all the older bootloaders. So what I guess I'm getting to is what would it take to use the new bootloaders with any of the ROMs?

bentheexo said:
So I have a question Doc, I know I posted about this in the CM11 unofficial thread as well, but I am running your Non-Knox, CiQ free version and I have CWM installed, and I'm perfectly rooted after I updated SuperSU from the Play Store, but when I try to CWM Flash a rom it throws an error about the ro.bootloader and it lists out all the older bootloaders. So what I guess I'm getting to is what would it take to use the new bootloaders with any of the ROMs?
Click to expand...
Click to collapse
If you have updated to official 4.3 by any means then don't try to downgrade your boot loader and rom as it may brick device
If you have not taken official update then it depends what is your current boot loader and what rom you are trying to flash
So if you are sure that you haven't gone for official update then you flash dmd5 firmware then try to flash rom
Be sure before doing anything
Sent from my SGH-T999 using Tapatalk

[Q] Trying to downgrade from 4.4.2 (Cyanagenmod 11) to 4.1.2 stock (T999UVDMD5)

As you'll soon discover, I'm a noob. I stupidly took the OTA update on my Samsung Galaxy S3 T-Mobile T999 from 4.1.2 to 4.3. Since doing so mine and my wife's phone (did the same thing to her also) gets in a mess after being connected to the car stereo bluetooth and prevents outgoing calls unless the phone is rebooted.
So to try to solve this, I rooted the phone and installed CM 11, so now I'm on 4.4.2. This didn't help the issue either and instead is worse at connecting to the bluetooth.
I want to get my phone back to the stock 4.1.2 rom, which I got from sammobile (PDA T999UVDMD5) or at worst back to the 4.3 stock rom (PDA T999UVUEMJC).
This morning I tried to flash T999UVDMD5_T999TMBDMD5_T999UVDMD5_HOME.tar using ODIN 307 but it failed almost instantly with an Fail! Auth message.
I also tried to flash CM 10.1 zip on my SD card using ClockworkMod Recovery v 6.0.4.5 but again it failed almost instantly (sorry I didn't take note of the error).
So now I'm back to CM 11. So any suggestions for how to get back to either of the stock roms?

huz666 said:
As you'll soon discover, I'm a noob. I stupidly took the OTA update on my Samsung Galaxy S3 T-Mobile T999 from 4.1.2 to 4.3. Since doing so mine and my wife's phone (did the same thing to her also) gets in a mess after being connected to the car stereo bluetooth and prevents outgoing calls unless the phone is rebooted.
So to try to solve this, I rooted the phone and installed CM 11, so now I'm on 4.4.2. This didn't help the issue either and instead is worse at connecting to the bluetooth.
I want to get my phone back to the stock 4.1.2 rom, which I got from sammobile (PDA T999UVDMD5) or at worst back to the 4.3 stock rom (PDA T999UVUEMJC).
This morning I tried to flash T999UVDMD5_T999TMBDMD5_T999UVDMD5_HOME.tar using ODIN 307 but it failed almost instantly with an Fail! Auth message.
I also tried to flash CM 10.1 zip on my SD card using ClockworkMod Recovery v 6.0.4.5 but again it failed almost instantly (sorry I didn't take note of the error).
So now I'm back to CM 11. So any suggestions for how to get back to either of the stock roms?
Click to expand...
Click to collapse
If you are getting errors in both odin and cwm, it sounds like it is a root issue. In other words, it sounds like the apps are being denied access to root and therefor cannot flash. Both odin and cwm are able to generate logs so you can tell the reason for the fail. Personally, I would recommend flasing twrp recovery instead of cwm since it seems to simplify alot and is a little better for our device. Without knowing exactly why the flash is failing, i would just recommend to try and re-root the phone again.

Did you put the phone in Downloading mode before connecting to the Odin ?
Do not try to flash 4.1.2 ever. It will brick your phone.

Perseus71 said:
Did you put the phone in Downloading mode before connecting to the Odin ?
Do not try to flash 4.1.2 ever. It will brick your phone.
Click to expand...
Click to collapse
Yes the phone was in downloading mode. I couldn't find any posts that thought that I would brick my phone for sure by downgrading so I thought I would try. Could I go back to the 4.3 Stock ROM with some degree of confidence?

Yes you can go back to 4.3 Stock.

Perseus71 said:
Yes you can go back to 4.3 Stock.
Click to expand...
Click to collapse
So I'm now back to Stock 4.3 by doing a flash via Odin. I did (stupidly) try to then go back to 4.1.2 again using Odin having put the phone in USB debugging mode first but I still got the same Auth Fail error.
Thanks for all the help.

huz666 said:
So I'm now back to Stock 4.3 by doing a flash via Odin. I did (stupidly) try to then go back to 4.1.2 again using Odin having put the phone in USB debugging mode first but I still got the same Auth Fail error.
Thanks for all the help.
Click to expand...
Click to collapse
You cannot downgrade like that once you have updated to official 4.3 firmware, no offence but why would you try it even after Perseus said not to? Anyway if you want to go back to 4.1.2 so badly just download a 4.1.2 ROM and flash it in recovery
Sent from my SGH-M919 using Tapatalk

serio22 said:
You cannot downgrade like that once you have updated to official 4.3 firmware, no offence but why would you try it even after Perseus said not to? Anyway if you want to go back to 4.1.2 so badly just download a 4.1.2 ROM and flash it in recovery
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
.
Thanks for the advice. I think I'll just quit while I'm only slightly behind now and remain on 4.3 Stock. I appreciate everyone's help and suggestions.

Downgrade from CM11 4.4.2 to 4.3 on I747
I went from 4.3 stock to CM11 on my i747 but i didnt like the update. So i am trying to go back to 4.3 however whenever i try to install the 4.3 zip file thru twrp or CWM, it fails. As far as i know there is no odin file for going back. I tried to flash rogers 4.3 file through odin (thinking i would flash at&t modem later) but that also failed.
I would appreciate any help on how to install 4.3 once 4.4.2 has been installed on an i747

You seriously need to do some reading
Sent from my SGH-T999 using Tapatalk

nitagro said:
I went from 4.3 stock to CM11 on my i747 but i didnt like the update. So i am trying to go back to 4.3 however whenever i try to install the 4.3 zip file thru twrp or CWM, it fails. As far as i know there is no odin file for going back. I tried to flash rogers 4.3 file through odin (thinking i would flash at&t modem later) but that also failed.
I would appreciate any help on how to install 4.3 once 4.4.2 has been installed on an i747
Click to expand...
Click to collapse
For One, you are on the wrong forum. This is for T-Mobile's S3 not AT&T. Second, Like @passtheknowledge said, you really need to do significant research and reading here on XDA.

Perseus71 said:
For One, you are on the wrong forum. This is for T-Mobile's S3 not AT&T. Second, Like @passtheknowledge said, you really need to do significant research and reading here on XDA.
Click to expand...
Click to collapse
I was up all night reading and trying all the suggestions that have been posted so far. Nothing worked. I would appreciate if someone can throw some light on what might be wrong.

nitagro said:
I was up all night reading and trying all the suggestions that have been posted so far. Nothing worked. I would appreciate if someone can throw some light on what might be wrong.
Click to expand...
Click to collapse
Please Read through this Thread. For Future Reference, all Odin Files for S3 in general are looked up by unique Keyword Root66. That thread is the right place for you to post errors or issues. If there's no 4.3 image for your phone there, you can post a request as well.
For your immediate Problem, there is a an alternate ATT StockMod Rom by @saranhai Please see this thread. Pay particular attention to the mandatory requirement of flashing a particular modem beforehand.

[Q] Note 2 bricked

Today i flashed CM 11 with CWM and after rebooting the baseband and IMEI were gone. I tried to flash the baseband but nothing happened. I then tried to flash the stock rom touchwiz through ODIN and it failed. Now the phone reboots asking to connect to KIES and do a recovery which i can't perform.
Any clues about?
Thank you in advance,
Davide

you have back up of your phone..?
can you boot into recovery..?
which stock rom you tried to flash , 4.3..? 4.4
http://forum.xda-developers.com/showthread.php?t=2758855 See this might help you
caravaggio971 said:
Today i flashed CM 11 with CWM and after rebooting the baseband and IMEI were gone. I tried to flash the baseband but nothing happened. I then tried to flash the stock rom touchwiz through ODIN and it failed. Now the phone reboots asking to connect to KIES and do a recovery which i can't perform.
Any clues about?
Thank you in advance,
Davide
Click to expand...
Click to collapse

tnt4ever said:
you have back up of your phone..?
can you boot into recovery..?
which stock rom you tried to flash , 4.3..? 4.4
http://forum.xda-developers.com/showthread.php?t=2758855 See this might help you
Click to expand...
Click to collapse
Thanks for the prompt reply. The Rom I flashed is the 4.4.2 snapshot.
In the meantime i flashed this pit file from this link
http://forum.xda-developers.com/showthread.php?t=2137008
and now the CYM is back and working but still no baseband.
Is there any way i can reinstall the stock rom ? is the partition a problem?
I dont have a backup of the EFS folder (I made it once but i cant find it)
EDIT: CWM is installed and working

is your IMEI Same..?
i assume there are several reasons, it can be a simple fix by installing a stock 4.4 KK which will eliminate the problem you are facing, iin past week, i done alot of experiences on my bricked note 2, specially the failed PIT flashed, i tried couple of them but at the end the only thing turned the phone in right direction was stock KITKAT
you can find that in the the post i posted earlier.
i am 100% sure you will get your phone back to life.
also remember to when you are done flashing go to stock recovery and wipe data and cache. It is needed after re-partiton to form the partitions correctly
edit: best keep a nand of your current rom as well
4.4.2
https://mega.co.nz/#!2QRmCbyb!YkWs927BfvYxqL-vJiQHXkshqG3UtqHm4XIDbgLsEK0
best of luck
caravaggio971 said:
Thanks for the prompt reply. The Rom I flashed is the 4.4.2 snapshot.
In the meantime i flashed this pit file from this link
http://forum.xda-developers.com/showthread.php?t=2137008
and now the CYM is back and working but still no baseband.
Is there any way i can reinstall the stock rom ? is the partition a problem?
I dont have a backup of the EFS folder (I made it once but i cant find it)
EDIT: CWM is installed and working
Click to expand...
Click to collapse

tnt4ever said:
is your IMEI Same..?
i assume there are several reasons, it can be a simple fix by installing a stock 4.4 KK which will eliminate the problem you are facing, iin past week, i done alot of experiences on my bricked note 2, specially the failed PIT flashed, i tried couple of them but at the end the only thing turned the phone in right direction was stock KITKAT
you can find that in the the post i posted earlier.
i am 100% sure you will get your phone back to life.
also remember to when you are done flashing go to stock recovery and wipe data and cache. It is needed after re-partiton to form the partitions correctly
edit: best keep a nand of your current rom as well
4.4.2
https://mega.co.nz/#!2QRmCbyb!YkWs927BfvYxqL-vJiQHXkshqG3UtqHm4XIDbgLsEK0
best of luck
Click to expand...
Click to collapse
Exactly. Flashing the official stock rom based on kitkat 4.4.2 (which has been released few days ago I believe) solved the problem. I'll try to flash CM tomorrow (tonight get.cm is not reachable and can't download the android app).
Thank you!

Hello
very happy to see your problem is fixed
enjoy your galaxy note 2
this community is very helpful for every one my friend
caravaggio971 said:
Exactly. Flashing the official stock rom based on kitkat 4.4.2 (which has been released few days ago I believe) solved the problem. I'll try to flash CM tomorrow (tonight get.cm is not reachable and can't download the android app).
Thank you!
Click to expand...
Click to collapse

Just wanted to ask you something. I installed the Nordic version of the latest Android update which is at the moment the only one available and I have the impression that the voice quality is not that good. I was wondering if this may depend on the baseband version installed on this one. I'm from Italy and kitkat 4.4 is still not available in my country. Flashing a different baseband may change the situation? If so, Is there a baseband more compatible with this touchwiz version and the Italian telco providers?
Thank you again,
Davide
Sent from my GT-N7105 using XDA Free mobile app

sound problem

Good Morning
passage through the forum to see if someone can help me with a problem I have since I started with custom roms. My problem is that the cell is left without sound when I have headphones on and the cell is hot. the strange thing is that the sound is full, even if I unplug the headphones. I have to reboot the phone and wait for the temperature to normalize again to plug headphones and the sound is heard.
Another fact is that my cell phone can be on fire and the sound will be perfect as long as you do not have headphones plugged
Does anyone know why this happens and how to fix it?:crying:

Unfortunately it sounds like you have a rather unique problem there. I've never encountered it anyway.
Have you tried other roms or kernels? If not, I think that would be the first thing to try. What rom and kernel are you currently using? Try flashing a stock based rom, factory reset, and see if it still occurs.
If the problem persists on different roms and kernels, it will likely be a hardware issue.
Have you also tried different headphones?
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
Unfortunately it sounds like you have a rather unique problem there. I've never encountered it anyway.
Have you tried other roms or kernels? If not, I think that would be the first thing to try. What rom and kernel are you currently using? Try flashing a stock based rom, factory reset, and see if it still occurs.
If the problem persists on different roms and kernels, it will likely be a hardware issue.
Have you also tried different headphones?
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
ow it is the cyanogenmod 12.1, before used the slimkat and both have had that problem. I have not tried with stock rom because when I try to flash it with Odin leaves me in soft brick. and I find the rom that works. and hardware problem not think it's, as you never give me problems, unless the cell phone is hot

frank461 said:
ow it is the cyanogenmod 12.1, before used the slimkat and both have had that problem. I have not tried with stock rom because when I try to flash it with Odin leaves me in soft brick. and I find the rom that works. and hardware problem not think it's, as you never give me problems, unless the cell phone is hot
Click to expand...
Click to collapse
One reason Odin could be causing problems is if you are attempting to flash software with bootloader and modem that is older than what is on the phone. You have had CM12.1 on the phone, but what is your current bootloader and modem? You can use these commands in Terminal Emulator to find out:
Code:
getprop ro.bootloader
getprop | grep version.baseband
I may have missed it, but do you have the i747 or the i747M? Both will work with the same roms, however they use different bootloaders and modems. Odin should stop you from loading ROMs from the wrong device, most times anyway.

dawgdoc said:
One reason Odin could be causing problems is if you are attempting to flash software with bootloader and modem that is older than what is on the phone. You have had CM12.1 on the phone, but what is your current bootloader and modem? You can use these commands in Terminal Emulator to find out:
Code:
getprop ro.bootloader
getprop | grep version.baseband
I may have missed it, but do you have the i747 or the i747M? Both will work with the same roms, however they use different bootloaders and modems. Odin should stop you from loading ROMs from the wrong device, most times anyway.
Click to expand...
Click to collapse
Well my baseband AMD modem is I747mvlufne6 I for this model as I was going down the roms

frank461 said:
Well my baseband AMD modem is I747mvlufne6 I for this model as I was going down the roms
Click to expand...
Click to collapse
NE6 would indicate the i747M. The soft brick could be a factor of returning to stock KitKat after having been on Lollipop, either CM or AOSP and their derivatives. If you want to try a stock 4.4.2 ROM, the fix for the soft brick is either:
1) Flash the stock ROM from your custom recovery, then flash the stock recovery before rebooting, boot into the stock recovery and do a factory reset. OR -
2) Place the stock ROM on an external sdcard, boot into your custom recovery, format the internal sdcard, flash the stock ROM, reboot.
Needless to say, you will lose everything you have not backed up. Of course, I don't know that the stock ROM will fix your sound and overheating issues.

Ok i trying this and leter i tell you what happen
Thanks

If I'm not mistaken, the i747m firmware is available from http://sammobile.com/firmwares
So you can just flash NE6 full firmware (or newer), boot recovery and factory reset.
(Might be a little more straightforward that way...eliminates some extra steps)
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
If I'm not mistaken, the i747m firmware is available from http://sammobile.com/firmwares
So you can just flash NE6 full firmware (or newer), boot recovery and factory reset.
(Might be a little more straightforward that way...eliminates some extra steps)
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
You are correct, it is on sammobile and it would eliminate some steps. I think he would lose root, but it would be easy enough to afterwards flash a custom recovery and then root with the supersu.zip.
I probably suggest the two steps I do because they are the same for the i747M and the i747. With the i747 there is no 4.4.2 stock from sammobile to flash, so that third option isn't present.

good to fix the sound problem may work because i was investigated and found that the kernel could be problems because it was not compatible with Android 4.4 or newer. So I wanted to try to return to rom stock and see if it is true.
Now I'm downloading the rom is SamMobile (after a few problems of my own) and later, say if the sound repair

dawgdoc said:
You are correct, it is on sammobile and it would eliminate some steps. I think he would lose root, but it would be easy enough to afterwards flash a custom recovery and then root with the supersu.zip.
I probably suggest the two steps I do because they are the same for the i747M and the i747. With the i747 there is no 4.4.2 stock from sammobile to flash, so that third option isn't present.
Click to expand...
Click to collapse
I downloaded the firmware file SamMobile but it Odin file is not to flash in recovery what do to work in recovery?

frank461 said:
I downloaded the firmware file SamMobile but it Odin file is not to flash in recovery what do to work in recovery?
Click to expand...
Click to collapse
@DocHoliday77 would it be safe for him to flash one of the At&T stock 4.4.2 ROMs made available by @enewman17 as long as he was very careful to not flash the bootloader and modem? I'm thinking it would, but I prefer hearing another voice confirm this.

frank461 said:
I downloaded the firmware file SamMobile but it Odin file is not to flash in recovery what do to work in recovery?
Click to expand...
Click to collapse
You have to be in Download Mode to flash with Odin, not recovery. (Same buttons but volume down instead of up.)
dawgdoc said:
@DocHoliday77 would it be safe for him to flash one of the At&T stock 4.4.2 ROMs made available by @enewman17 as long as he was very careful to not flash the bootloader and modem? I'm thinking it would, but I prefer hearing another voice confirm this.
Click to expand...
Click to collapse
That would be safe to do. The main reason I still suggest flashing the full official firmware though is in case something currently on the device got corrupted somehow. Plus if he flashes the NE4 system and it still isn't fixed, the next step would be to flash full official stock anyway. Imo, it's the only true way to know if you have a hardware or a software issue.
That said though, I have a feeling things would end up working with either one of those solutions.
Sent from my SGH-T999 using Tapatalk

Sorry for the delay, I have already flashed the official ROM and as the sound problem is arrangement. however I have one more question, I'm from mexico but to flash the rom NE6 cell did not recognize the Spanish language. it is the only detail, as I pass the phone to Spanish without rooting the phone
As I said everything works fine, signal, wifi, everything. I guess because it is released. But I would like this in Spanish.
for now thank everyone who attended my problem.

Note 3 on 5.0 trying to go back to stock ROM

Hello everyone,
I have a TMO Note 3 running Lollipop at this moment, the phone is rooted, but I tried flashing a new ROM and it soft bricked on me. ODIN stopped at the very beginning of flashing and just bricked the phone. Also TWRP was not working either and still not, but I was able to bring the phone back from the semi-dead state it was in. I want to flash it again but now I don't know if I did something wrong (most likely) and I just need some feedback on what to do. I wanna go to a stock rom so i can upgrade to the actual Lollipop Rom from T-mobile but I was also wondering if I can just flash a stock 5.0 rom that runs better than the one I have. Additionally, I just cant get TWRP to stick at all; every time I try to flash it and try to go into recovery, phone goes into boot loop. Here are some screenshots of the current "about phone" section. I am sorry if i am not asking the right questions but I gotta start somewhere. Thanks everyone in advanced!
https://imgur.com/a/dpn3Y

If you can get into download mode, flash the latest stock rom from Sammobile.com.

audit13 said:
If you can get into download mode, flash the latest stock rom from Sammobile.com.
Click to expand...
Click to collapse
look for the samfirm tool, its faster then going through sammobile:good::highfive: