Develop Bugs

AudioX - Louder One X Speaker Output - CWM Flashable

Hi all,
Managed to put the AudioX settings into a flashable CWM.zip file.
Attached is the newest version which I have currently installed:
Disable Tru Bass effect.
Limiter set to 0.150 instead of 0.250
SRS3D Set space to 0.5 instead of 0.800
I decided to leave some of the limiter since having an uncompressed signal can harm the physical speaker.
This tweak means louder speaker output and no Trubass effect which is by default boosting the 400Hz area.
WARNING: I do not take any responsibility for broken speakers etc. When I tried the original edits the volume was so loud the speaker made some crackle noises. If you keep that volume level chances are you will destroy the speaker and then it will crackle even at lower volumes. The new version does have a softer limiter and the volume levels are good so I think the speaker is not in danger.
Attached is the AudioX.zip cwm installable and the Default_Audio_Settings.zip installable. If you don't like the result simply flash the second zip.
All the best

How to change some value in file mixer_paths.xml for increase earpiece sound volume

Does anyone know how to adjust some value in files mixer_paths.xml for increase earpiece sound volume.
"which words are mean ear sound volume in that files" (for files in OPPO is difference from OnePlus)
i don't know what is making my phone is too low sound volume. this cause was happen since rom 1.2.4i, i have been continuous to update rom alway until now 2.0.6i

Thank you
Thank you very much.

lg g7 Viper4android Volume error (overdrive, clipping)

I have the problem that when I have Viper4android installed on my LG g7, then loud volume problems (clipping / overdrive) can someone tell me how to fix it

Sony92 said:
I have the problem that when I have Viper4android installed on my LG g7, then loud volume problems (clipping / overdrive) can someone tell me how to fix it
Click to expand...
Click to collapse
Turn down whatever is causing the clipping or distortion. Could be gains or eq levels too high, or bass level above the recommended. Could be you have multiple things leveled up to high, like eq gain, subwoofer option on and maxed, and or many things. I'd clear cache & data, that will reset to fresh start then slowly increase things until you reach optimal sound.
Best of luck!

First... This is very old topic...
Second if anyone have that problem:
For me distortion was caused by our DTS.
If you can disable DTS by comment library eagle
and effect eagle_pipeline in audio_effects.xml or through system props
ro.product.lge.globaleffect.dts=false
ro.le.globaleffect.dts=false
Then you will amplify your audio with any equalizer.
If you have magisk and module, and i assume that you have then create file called system.prop paste these two props, save, set permission of the file to 0644 or rw-r--r-- and reboot.
You will lose DTS:X, equalizer (system), but possibility to adjust audio without distortion and quad dac is still working.

How can I change the volume of the speaker's frequencies?

Hi,
I have issues with Sss-sibilants at phone calls: they are too loud for my ears through the speaker of the OnePlus 7T even at the lowest speaker volume.
So, I have the idea to lower the volume of specific speaker's frequencies [around 4-10 kHz].
Is there a way to this?
I can't find a possibility in the audio controls of the Oxygen OS.
Maybe there is a possibility using "MagiskHide Props Config" or there is a simple equalizer which works at system level to control the speaker for phone calls.
Thanks in advance for any ideas/solutions.

How to improve speakers quality (balance, bass, clarity) [7 / 7T / 7 Pro]
It's possible to significantly improve loudspeakers sound quality and fix imbalance with hidden Dolby Atmos settings. Follow any or both steps below (good for all Oneplus 7 series). STEP 1: Fix stereo imbalance (ROOT is required) The top...
forum.xda-developers.com
Edit: I haven't tried it yet so use at own risk... Though I may give it a go yet cause I like to play

Thanks for the link =)
I'll give it a try.
Hopefully the settings also normalize the hearing experience while having phone calls...

Question lowest volume is too loud on rooted OOS OP9P

Hello
The lowest possible speaker volume is too loud when listening to anything, Sirius or iHeart. My previous OP7P's volume was lower for the first volume setting.
Is there anything I can do to lower the decibels a bit?

nabril15 said:
Hello
The lowest possible speaker volume is too loud when listening to anything, Sirius or iHeart. My previous OP7P's volume was lower for the first volume setting.
Is there anything I can do to lower the decibels a bit?
Click to expand...
Click to collapse
Did you install the dolby atmos mod or viper4android?
Is this over wired usbc headphones, bluetooth, or the speaker?
There is a Bluetooth volume control in developer settings if it's bluetooth/headphone related.
The atmos or viper4android mods can make the volume a lot louder. I go turn my atmos from custom back to voice or movie.
It may help to post what version of android you're using and if you're rooted, for more help

Thank you App
I mentioned my op9p that, yes I'm rooted.
I'm on A112 and did install the Dolby mod you helped me with in another thread.
I am referring to the volume of the phone's speaker as I listen to Sirius, for example.

nabril15 said:
Thank you App
I mentioned my op9p that, yes I'm rooted.
I'm on A112 and did install the Dolby mod you helped me with in another thread.
I am referring to the volume of the phone's speaker as I listen to Sirius, for example.
Click to expand...
Click to collapse
I must have missed it. I didn't recognize the name but try changing your dolby atmos setting to another preset setting or turn off "volume leveler" or "dialogue enhancer" and see how it sounds then

Thank you App
That did it. It was the volume leveler setting, I think.

nabril15 said:
Thank you App
That did it. It was the volume leveler setting, I think.
Click to expand...
Click to collapse
Happy to help! Sorry I didn't recognize your name from the other thread or I would have said try that before asking about your viper/dolby.
I asked because I had the exact same issue. I was laying down with my kids like 'damn, this is awfully loud for volume 1' . I remembered the Dolby install earlier that day and that was my issue.
It's good to know it worked the same on a11 and a12 for future people wondering the same thing.
I had something similar happen on Viper on an older phone with my aux cable, it would sound distorted until adjusted in viper but only in my car aux. Not wired headphones or bluetooth