Develop Bugs

Guides Unlock boot-loader, installing Recovery and Custom Rom and MODS - Lenovo Vibe K4 Note Guides, News, & Discussion

first of all, im not developer im just sharing what i use
hello everyone.
i saw many in here asking about how to root or unlock boot-loader or flashing custom rom
so i will share what i have done (( again im just sharing and im not responsible of any damage ))
***first step is unlocking bootloader***​i used this Unlock thanx to http://lenovo-forums.ru/
now lets d the steps of unlocking​
UNLOCKING WILL FORMAT EVERYTHING so backup what u need
1. download and extract the app of unlocking will use it in step 5
2. go to Settings - About phone - device information and tap on "Build number" until you become a developer.
3. Go to Settings - Developer options - tap on OEM unlocking - then tan op Android debugging.
4. go to home in mobile and plug USB
5. go to the unlocking app and click on A7010_unlock
6. it will go to fastboot mode READ what asks for and click on volume up when it says so!
7. after it finished keep holding in power til it restart
8. it will take about 3-5 minutes to start
9. congratulations ur K4 is unlocked​
NOW LETS GIVE IT TWRP RECOVERY ​i use @mohancm Recovery its stable and no sdcard or internal sd bugs . but if u want anything else u can use its up to you!
now lets do the right steps for flashing custom Recovery
1. Recovery already in this ZIP file download it and unzip
2. now hold you mobile
3. go to Settings - About phone - device information and tap on "Build number" until you become a developer.
4. Go to Settings - Developer options - active Android debugging.
5. go to home in mobile and plug USB
6. go to the TWRP folder and click on TWRP_Install
7. it will go to fastboot mode and install recovery by it self
8. after it finished DONT REBOOT TO NORMAL MODE
9. keep holding power and volumes up and down till you see Lenovo start up Screen . now keep holding the volumes up and down keys till u get black screen, wait a bit and recovery will open
10. congratulations ur K4 is unlocked and have TWRP recovery .​
now lets Root it or install custom Rom​its up to you what ROM you want to use but i like resurrection-remix-m its bugles and smooth and fast
so if you like it u can download and use the coming steps . P.S steps will work on any custom Rom you choose to install
1. Download Rom and copy it to you external sdcard
2. go to recovery
3. Recommended - Full wipe and factory reset(including internal storage)
4. click on flash and flash the Rom you saved in external card
5. if you used resurrection remix Rom dont forget to flash GAPPS the recommended in the Rom Link
6. flash Supersu
7. reboot device
8. step up the mobile and leave it 5-10 minutes then reboot ,​NOW YOU ARE READY TO USE THE ROM​
Now lets talk about most used Roms and Mods that working very well in Lenovo a7020 ​ROMS​As showing up there is RESURRECTION REMIX M [5.7.4][MT6753] very good and stable Rom . will find it HERE
We have Nikkali Rom a very good Rom and stable and it have VOLTE working you will find it HERE
And we have macblaze Rom a very good Rom and stable and it have VOLTE working you will find it HERE
And we have Lenovo A7010 - CM13.0 its stable and smooth you will find it
HERE its Russian use translator
A user have updated the CM13 and made some mods and new things to it u will find it HERE its Russian use translator
will update when we have any full working ROMS​MODS​now lets talk about XPOSED
it have many mods and great things but as many users have report if you want to use a stock based ROM ROW-S232 for now if u install XPOSED will get bootlop
SOUND MOD
if you are using CM13 or RR its a great sound mod Divine Beats
THREAD WILL BE UPDATED​

Good work ?

mohancm said:
Good work
Click to expand...
Click to collapse
thank you
and if i forget anything plz let me know

Hi, When I click the link to the App for unlocking above "APP" it doesn't go to the unlocking app. It is instead linked to "recovery.img". By the way what is the name of the application? Tnx

atomlife_074 said:
Hi, When I click the link to the App for unlocking above "APP" it doesn't go to the unlocking app. It is instead linked to "recovery.img". By the way what is the name of the application? Tnx
Click to expand...
Click to collapse
download it and check!
it have the UNLOCK and the RECOVERY run file

Thanks for your reply. It was caused by partial download yesterday. I have the complete files now.

atomlife_074 said:
Thanks for your reply. It was caused by partial download yesterday. I have the complete files now.
Click to expand...
Click to collapse
Good

I followed the steps correctly and I am able to boot into recovery but it is chinese.
Pls advise.

rishi2000 said:
I followed the steps correctly and I am able to boot into recovery but it is chinese.
Pls advise.
Click to expand...
Click to collapse
Russian not chinese
Change language to English
Sent from my Lenovo A7010a48 using XDA-Developers Legacy app

crazylife said:
Russian not chinese
Change language to English
Sent from my Lenovo A7010a48 using XDA-Developers Legacy app
Click to expand...
Click to collapse
How?? Can you pls explain step by step . Sorry giving too much trouble.

rishi2000 said:
How?? Can you pls explain step by step . Sorry giving too much trouble.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my K4 NOTE using XDA-Developers Legacy app

rishi2000 said:
How?? Can you pls explain step by step . Sorry giving too much trouble.
Click to expand...
Click to collapse
recovery and details have been updated
re check it up in first post
it will be English by default

crazylife said:
recovery and details have been updated
re check it up in first post
it will be English by default
Click to expand...
Click to collapse
Now after doing all the steps.
First boot i pressed the volume keys (both) and power button and after Lenovo screen released the power button and keep holding the volume keys. till black screen appears.
after that no further display available. touch can be recognised. i mean vibration is coming while pressing on the sscreen and back key etc.
Please advise if I done something wrong.

rishi2000 said:
Now after doing all the steps.
First boot i pressed the volume keys (both) and power button and after Lenovo screen released the power button and keep holding the volume keys. till black screen appears.
after that no further display available. touch can be recognised. i mean vibration is coming while pressing on the sscreen and back key etc.
Please advise if I done something wrong.
Click to expand...
Click to collapse
You need to wait at least a minute after flashing recovery.
Don't touch phone till then.
After a min press power button once. You can unlock the recovery.
After that go to setting in recovery. Change brightness to 10% . small issue. But bothers lot in beginning.

work for lollipop?

arifvox said:
work for lollipop?
Click to expand...
Click to collapse
Work Android M?

alison.rm said:
Work Android M?
Click to expand...
Click to collapse
Only for Android 6 marshmallow

arifvox said:
work for lollipop?
Click to expand...
Click to collapse
Nop only for Marshmallow

Hello...
8 - "DONT REBOOT TO NORMAL MODE"?
I do not understand step 9 ... I did not understand which buttons to press. I may not be able to restart in recovery mode.
Root = flash the zip with TWRP. Right?
Xposed = flash sdk23 / arm64 zip with TWRP. Right?

I couldn't get TWRP work in my phone, not sure what step I misunderstood or missed out. After the unlock process the phone will be reset and I need to set up dev, usb debugging again after normal reboot. After renaming/replacing recovery.img run the install twrp script. The phone will reboot into recovery and it normally says "press any key to continue" until the process is completed, then wait for a few minutes. However when I reboot to recovery mode it's still "Lenovo recovery" not TWRP. I did it about 3x with the same result. Any idea? Thanks in advance.

Related

This is not my work, all credits goes to mr. devcon69.
Original Site
- THIS IS INTENDED FOR LG OPTIMUS LTE (SU640) ONLY. PLEASE DON'T TRY ON OTHER LG OPTIMUS LTE VARIANTS.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- I'M NOT LIABLE FOR ANYTHING THAT MIGHT HAPPEN TO YOUR DEVICE. DO AT YOUR OWN RISK.
- PLEASE USE A LAPTOP OR A PC WITH A BACKUP POWER SUPPLY IF POSSIBLE TO AVOID HARD BRICKING YOUR PHONE IN CASE OF POWER FAILURE.
- AVOID USING CHEAP USB CABLES, USE THE ORIGINAL LG CABLE.
- I saved the tutorial for customizing the LG OPTIMUS LTE (SU640) as a PDF document.
- All the applications and the PDF tutorial are included in the zip file.
TUTORIAL AND COMPLETE FILES: (Use Winrar/Winzip to extract files)
[Tutorial deleted, please use the old method at the end of this post or follow this one] We'll wait for mr. devcon69 for update. Sorry guys.
V30C JELLYBEAN FIRMWARE:
Mirror 1:
Mirror 2:
Mirror 3:
V30C_00.kdz MD5: E6EEA12AA5D164AC053203EC03A12AEA
After downloading the file run Md5Checker from the DRIVERS folder. Click Add and browse for the V30c_00.kdz file to verify the MD5 Checksum.
If it's different from the MD5 posted above then the downloaded file might be corrupted or incomplete.
Redownload the file. Use a download manager for faster downloading.
Click to expand...
Click to collapse
CUSTOM ROMS:
1. SU640 V30C ROM by TNT V3
Download: <click here for link>
Credits to tedofu_katozi and TNT Team
Based on Stock Jellybean V30c.
Can be used as daily driver
No SMS Limit
USSD Working
Qslide Available
Fixed bugs from v2
2. SU640 CyanogenMod (CM9/CM10)
Link
GAPPS (GOOGLE APPLICATIONS)
Flash after installing Cyanogenmod. Choose the right package please.
DON'T DO ANY WIPES AT ALL.
ICS/CM9: Link
JB/CM10: Link
Click to expand...
Click to collapse
3. GFAN.COM ROMS (Use google translate and register to the site to access all ROMS).
Link
4. TINHTE.VN ROMS (Use google translate)
Link
Link
5. Some other ROMS and stuffs
Link
To set english as default language on GFAN.COM & TINHTE.VN ROMS:
Open the rom/zip file on your PC with Winrar/Winzip. Open "system" folder and look for the "build.prop" file.
Extract the file and open with notepad or any text editor.
Look for these lines:
ro.product.locale.language=xx
ro.product.locale.region=XX
replace with
ro.product.locale.language=en
ro.product.locale.region=US
Save the file and place it back on the archive. DONE!
In case that the system folder is in "img" format (system.img). Search for ways to extract and edit android img files and how to recompile them.
Click to expand...
Click to collapse
***************************** CREDITS TO ALL THE VIETNAMESE & CHINESE DEVELOPERS *******************************
Click to expand...
Click to collapse
APN SETTINGS FOR GLOBE/TM/SMART/SUN (For Philippines only)
If you're not receiving any settings for your networks GPRS/3G/Mobile Internet configuration then download the file below and flash with CWM.
Don't do any wipes at all.
APN Settings for CWM: <click here for link>
After a successful flash. Go to Settings> More > Wireless & Networks > Mobile Networks > Access Point Names and Select desired setting.
Click to expand...
Click to collapse
DOWNLOAD MODE TROUBLESHOOTING:
If you have problems with booting to download mode.
TURN OFF the device, remove and reinsert the battery. Don’t turn on yet, hold VOLUME UP BUTTON THEN connect to your PC.
Click to expand...
Click to collapse
In case of a bootloop or if the device gets stuck on the bootscreen after a successful flash with stock firmware. Just hold power button to turn off the device, if it doesn't turn off remove the battery instead. Insert the battery to do a FACTORY RESET. Same as booting to CWM Recovery on custom rom.
(Press and hold Volume Down Button + POWER Button. Wait until a FACTORY HARD RESET prompt is displayed then release. Press POWER button TWICE to confirm FACTORY RESET)
Click to expand...
Click to collapse
IN CASE YOU'RE HAVING PROBLEMS WITH THIS METHOD TRY THE OLD ONE HERE:
TUTORIAL AND COMPLETE FILES: (Use Winrar/Winzip to extract files)
Mediafire
Mirror 2: GDrive
Mirror 3: FileFactory
V10i GINGERBREAD FIRMWARE:
Mirror
Mirror 2: GDrive
Mirror 3: Mediafire
(Join the files with HJSPLIT. A "V10i_00.kdz" file will be created)
Part 1
Part 2
Part 3
Part 4
Part 5
Click to expand...
Click to collapse
---------------------------------------------------------------------------------------
If you experience FC/not responding/errors on flashing the KDZ file TRY THIS METHOD.

Lg Nitro HD(P930/P935) rom ported for Su640
Thanks man! this is a precious guide. i used and successfully flash Cm9 on my phone!
i am just wondering if there is any At&T or Bell's rom ported for SU640 as i got one for LU6200 here
http://forum.xda-developers.com/showthread.php?t=1859922
thanks in advance, hope you will help me out!
GBU :good:

Re: [GUIDE] SU640 Rooting and CWM Recovery
I don't know if there's one, have you tried searching on other sites? I think there's a method where you will have to flash baseband.img in order to install roms for p93x. I didn't try, I'm happy with miui. and I'm not sure about the method.

well thanks! i will search that. thanks for help

help
ok brothers i have done every thing fine i succesfully instaled custom rom on it but after one day i wanted to change the rom so i made backup of it and since then .I HAVE MESSED UP AND I DONT KNOW WHAT TO DO I INSTALLED THE ROM AND MADE BACKUP OF IT THROUGH RECOVERY AND NOW AFTER THAT WHEN I REBOOT MY LG SU640 IT STARTS BUT AFTER COMPLETLY OPENING WHEN I UNLOCK THE LOCK SCREEN IT HANGS AND RESTARTS AND SAME SAME AGAIN AND AGAIN. I REINSTALLED THE ROM ClEARED EVERYTHING AND REINSTALLED THE ROM STILL THE PROBLEM PRESIST.... GOT ANY IDEAS BROTHER? I TRIED ANOTHER ROM ALSO ON IT AND STILL THE SAME PROBLEM...

Re: [GUIDE] SU640 Rooting and CWM Recovery
That's weird. Have you wiped the device? Wipe data, cache, and dalvik?

Re: [GUIDE] SU640 Rooting and CWM Recovery
Danial Ahmad said:
ok brothers i have done every thing fine i succesfully instaled custom rom on it but after one day i wanted to change the rom so i made backup of it and since then .I HAVE MESSED UP AND I DONT KNOW WHAT TO DO I INSTALLED THE ROM AND MADE BACKUP OF IT THROUGH RECOVERY AND NOW AFTER THAT WHEN I REBOOT MY LG SU640 IT STARTS BUT AFTER COMPLETLY OPENING WHEN I UNLOCK THE LOCK SCREEN IT HANGS AND RESTARTS AND SAME SAME AGAIN AND AGAIN. I REINSTALLED THE ROM ClEARED EVERYTHING AND REINSTALLED THE ROM STILL THE PROBLEM PRESIST.... GOT ANY IDEAS BROTHER? I TRIED ANOTHER ROM ALSO ON IT AND STILL THE SAME PROBLEM...
Click to expand...
Click to collapse
Ate you sure that the rom you installed is for su640?. Installing ROMs for p93x is incompatible with our device. Make sure that the developer of the rom states that its compatible for su640.

well thanks! i will search that. thanks for help

Dear expressions104!
TUTORIAL AND COMPLETE FILES links are dead.
Is it possible that you may re-upload the files.
Looking forward.

Links are up..

Thanks OP!
This made my life easy.

Thread updated! Links are up!
..

expressions104 said:
Links are up..
Click to expand...
Click to collapse
burahin mo n to pre, pra sating mga pinoy lang to eh.. tsk tsk

Hindi naman po masama mag share sir. Buburahin ko lang po ito pag kailangan ng burahin. Plus meron po akong permission from mr. Devcon69 na irepost dito sa xda ung thread.

Thanks for the guide but i have a problem.
I cant install CWM recovery. Tried it two times but to no avail. The tutorial states that CWm is installed adn then it doesnt boot into CWM.
The device rooted succesfully though.
Any solution?

Vol down + power button doesnt take you to recovery? Have you tried rebooter?
In case cwm is not installed try it once again. If it has the same result try the OLD METHOD.

rooting and cwm recovery
Arhum1994 said:
Thanks for the guide but i have a problem.
I cant install CWM recovery. Tried it two times but to no avail. The tutorial states that CWm is installed adn then it doesnt boot into CWM.
The device rooted succesfully though.
Any solution?
Click to expand...
Click to collapse
it simply means that your mobile is not rooted properly.thats why mobile not rebooting to cwm.
kindly root the mobile properly.if it again gives error , tell me

Attach a picture of the rooting guide after that it takes five minutes until the tutorial states that it is booting into CWM which it doesnt. I tried using rebooter to boot into CWM but using that i stumble upon a dead android with a exclamation mark over its stomach after the phone shuts down and tries to reboot into CWM.
Any solution?. And i updated my phone thorough LG software for the jellybean update.

Hi Guys, I'm currently on Custom PACROM and I'd like to try this Rom. Do I need to Flash this through LG Flash software? or I can just flash this through recovery?

Bootloop on SU640 V30C ROM by TNT V3
hey im having bootloop on that rom. ive done clean wipes but still bootlooping.
is it me whos doing wrong?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTICE: Go here for my newer tool here http://forum.xda-developers.com/showthread.php?p=52973530
ABOUT​This is a very simple CMD UI to install the TWRP (Jellybean and Kitkat) for the P6, as well as to revert back to stock recovery. There is also option to unlock bootloader, but I'm not very sure that it works.
Hope this makes flashing TWRP/Stock recoveries easier!
This is my first time making something for xda. I would be excited to hear any feedback or suggestions.
FEATURES
TWRP Installing for Jellybean, Kitkat B506, and OMNI ROM.
Reverting to stock recovery for Jellybean and Kitkat B506.
Entering into recovery.
Unlocking device (untested)​
REQUIREMENTS
Unlocked Bootloader (You can use this tool or install B506)
KITKAT B506 Based ROM
OMNI Based ROM
JELLYBEAN Based ROM
DRIVERS FOR HUAWEI P6-U06 or P6-U00
DOWLOADS
TWRP Installer V1.1.3b
TWRP Installer V1.1.3a
TWRP Installer V1.1.2
TWRP Installer V1.1.0
TWRP Installer V1.0.1
TWRP Installer V1.0.0
INSTRUCTIONS​Here are the steps:
1. Download file here. http://goo.gl/6nONyf
2. Extract the rar to desktop.
3. Run "TWRP_Installer.exe". I don't believe you need admin settings.
4. And just follow instructions on the screen from there.
WHAT IF MY PHONE WON'T BOOT?​Do not worry! Just follow the instructions below!
However, you will have to enter into fastboot mode manually before you use the tool. This is how:
1. Plug in your phone to a computer.
2. Press down power and volume(-) for 10 seconds, and wait for your device to turn off. Do not let go.
3. After you see Huawei logo for 2 seconds, release the power button.
4. After 5 seconds, release the volume (-) button.
5. This will enter into fastboot mode, and then you can continue to use the tool. From there, you would either:
a) Install Stock Kitkat/Jellybean Recovery, b) TWRP Kitkat/Jellybean
6. Enter recovery mode. If you choose stock recovery, download an UPDATE.APP and install the OS likewise. If you choose TWRP, download a custom rom, and install the OS likewise.
CREDITS​ @surdu, @TeamWin, @tauio111 .
Here is the OP of TWRP. Make sure you thank surdu for his hard work.
http://forum.xda-developers.com/showthread.php?t=2709353
Here is the OP for bootloader unlock. Make sure to thank tauio111.
http://forum.xda-developers.com/showthread.php?p=50741449
Here is the old work that I had posted. This gave me the thought to make the CMD installer.
http://forum.xda-developers.com/showpost.php?p=49986799&postcount=10
And don't forget to thank me of course:laugh:
If you repost my work, make sure to give credits to me.
SCREENSHOTS
CHANGELOG​2014-Apr-07 - V 1.0.0
Initial Release
2014-Apr-09 - V 1.0.1
Added Support For Jellybean
Added Bootloader Unlock
Added Boot.img Restore
2014-Apr-12 - V 1.1.0
Removed issue for external dll dependency
Removed .bat file dependency to avoid accidental executing
Move recovery.img, boot.img, adb.exe, fastboot.exe into another folder, easier to find TWRP_Installer.
2014-Apr-14 - V 1.1.2
Updated to newest surdu's 2.7.0.0 TWRP
Included boot.img OMNI and B506 for TWRP internal storage support
Fixed a bug issue with option 5 and 6
2014-Apr-24 - V 1.1.3a
Fixed an issue with option 1
2014-May-5 - V 1.1.3b
Added support to Windows XP
XDA:DevDB Information
CMD TWRP Installer, Tool/Utility for the Huawei Ascend P6
Contributors
bokchoi2020, surdu, tauio111
Version Information
Status: No Longer Updated
Created 2014-07-04
Last Updated 2014-07-04

thx

Curcio said:
thx
Click to expand...
Click to collapse
No problem! If I have time, next update I may include choice to install Jellybean Twrp and Jellybean stock!

OK, Update released!
To 1.0.1! More details in the OP thread!

My Phone is Stuck!
Please help,
My phone is stuck after i accidentally installed the OMNI boot image from this tool on the stock Kitkat B506. The problem is that "TWRP_Installer_1.0.1.exe" was not working, asking for some missing .dll. Then i just double clicked on "omni_boot_kitkat.bat" and without waiting for my input or confirmation, it went ahead and did something. Now i am stuck on the android logo. I don't have TWRP also. Please help me to bring the system back to normal.
-Majrul

majrul said:
Please help,
My phone is stuck after i accidentally installed the OMNI boot image from this tool on the stock Kitkat B506. The problem is that "TWRP_Installer_1.0.1.exe" was not working, asking for some missing .dll. Then i just double clicked on "omni_boot_kitkat.bat" and without waiting for my input or confirmation, it went ahead and did something. Now i am stuck on the android logo. I don't have TWRP also. Please help me to bring the system back to normal.
-Majrul
Click to expand...
Click to collapse
Click the stock_boot_kitkat.bat to revert to stock boot.img.
Or just do
fastboot flash boot boot.img
I will look into the issue with the dll library being missing.
Sent from my P6-U06 using xda app-developers app

bokchoi2020 said:
Click the stock_boot_kitkat.bat to revert to stock boot.img.
Or just do
fastboot flash boot boot.img
I will look into the issue with the dll library being missing.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
I am unable to, because i am getting this error everytime:
error: device unauthorized. Please check the confirmation dialog on your device.
And there is nothing on the screen except an android logo. I am unable to do anything!

majrul said:
I am unable to, because i am getting this error everytime:
error: device unauthorized. Please check the confirmation dialog on your device.
And there is nothing on the screen except an android logo. I am unable to do anything!
Click to expand...
Click to collapse
Shoot.... but how is that possible?
When you install the omni boot.img, it requires usb debugging enabled, with RSA fingerprint from the computer to be whitelisted.
It installed, so clearly you had the RSA fingerprint whitelisted...
But now when you try to install the stock boot.img now it blacklisted the RSA fingerprint...
Ok, you can give this a shot but I'm not sure if it will work.
1. Get an SD card, put the B506 update on it.
2. Reboot into recovery with power and (+)(-) buttons.
3. Then reinstall the B506 update.
The update should replace the boot.img.
If it still doesn't work, do a factory reset/ partition wipe from the recovery.
I'm sorry for the inconvenience that this may have caused you.
I will look deeply into this issue.

Can u explain more? I don't get it
Sent from my GT-S7562 using xda app-developers app

Thy Boss said:
Can u explain more? I don't get it
Sent from my GT-S7562 using xda app-developers app
Click to expand...
Click to collapse
Basically my exe didn't start on his computer because I didn't compile the program with a static library. I'm going to fix that.
Then he went ahead and tried running one of my scripts, which installed the OMNI kernel. But he was using B506 stock, which then made his device not boot due to different ramdisk config.
I then suggest that he reflash the stock boot.img which I included in another batch file, but then the OMNI kernel asks for permissions for USB debugging.
His phone doesn't boot in the Android UI so he can't access the confirmation box that allows debuging.
He doesn't have TWRP, so he can't flash recovery boot.img that way either.
So now the only solution is to reinstall the ROM via UPDATE.APP.
Sent from my P6-U06 using xda app-developers app

bokchoi2020 said:
Basically my exe didn't start on his computer because I didn't compile the program with a static library. I'm going to fix that.
Then he went ahead and tried running one of my scripts, which installed the OMNI kernel. But he was using B506 stock, which then made his device not boot due to different ramdisk config.
I then suggest that he reflash the stock boot.img which I included in another batch file, but then the OMNI kernel asks for permissions for USB debugging.
His phone doesn't boot in the Android UI so he can't access the confirmation box that allows debuging.
He doesn't have TWRP, so he can't flash recovery boot.img that way either.
So now the only solution is to reinstall the ROM via UPDATE.APP.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Followed the steps, got the phone working back again, but unfortunately lost all the phone memory data like call logs and sms. I will request you to please modify this program so that it doesn't installs anything without user confirmation.
I was sincerely looking for such a tool. I thank you for your effort, i am sure you will take care of the changes immediately.

majrul said:
Followed the steps, got the phone working back again, but unfortunately lost all the phone memory data like call logs and sms. I will request you to please modify this program so that it doesn't installs anything without user confirmation.
I was sincerely looking for such a tool. I thank you for your effort, i am sure you will take care of the changes immediately.
Click to expand...
Click to collapse
Yes, thanks for your understanding. For next release I will try to integrate the bat files into the exe so no more accidental installation by the end user will occur. Maybe have a confirmation before the install.

majrul said:
Followed the steps, got the phone working back again, but unfortunately lost all the phone memory data like call logs and sms. I will request you to please modify this program so that it doesn't installs anything without user confirmation.
I was sincerely looking for such a tool. I thank you for your effort, i am sure you will take care of the changes immediately.
Click to expand...
Click to collapse
Ok, Update will be soon.
Changes include .exe working without external dll support, and no more bat files.

bokchoi2020 said:
Ok, Update will be soon.
Changes include .exe working without external dll support, and no more bat files.
Click to expand...
Click to collapse
That's great. Really appreciate your efforts. I am waiting to downloading it again..

Ok, I just updated it to 1.10! If there are any issues, please tell me!
Changes include removing the .bat files and making the .exe non-dependant on external .dll libraries.
The images are put into a sources folder to make using the tool more easier for end user.

bokchoi2020 said:
Ok, I just updated it to 1.10! If there are any issues, please tell me!
Changes include removing the .bat files and making the .exe non-dependant on external .dll libraries.
The images are put into a sources folder to make using the tool more easier for end user.
Click to expand...
Click to collapse
Yes twrp.exe work good. Not any error this time.

bokchoi2020 said:
Ok, I just updated it to 1.10! If there are any issues, please tell me!
Changes include removing the .bat files and making the .exe non-dependant on external .dll libraries.
The images are put into a sources folder to make using the tool more easier for end user.
Click to expand...
Click to collapse
Wow. Works perfect! Thanks a lot once again for such a nice tool!

Super travail
Un grand merci pour ce bon boulot , sa marche nickel , continu comme sa : O: O: O

olhamike said:
Un grand merci pour ce bon boulot , sa marche nickel , continu comme sa : O: O: O
Click to expand...
Click to collapse
Pas de probleme!
Desole si mon francais n'est pas bon.
Sent from my P6-U06 using xda app-developers app

Works fine for me and solved my problems.
Absolutely an useful application, thanks alot bro

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Recovery:​
http://forum.xda-developers.com/showpost.php?p=58789939&postcount=2
Root:​
http://forum.xda-developers.com/showpost.php?p=58789967&postcount=3
Firmware and ROM:​
http://forum.xda-developers.com/showpost.php?p=58789967&postcount=4
BRICK? WRONG FLASH OTHER MODEL FIRMWARE?​
-Download latest SP Tool and latest MTK driver
-Extract Jiayu S3 Firmware and open SP Tool
- Select Scatter File from jiayu s3
- Select Firmware Upgrade or Format+download
- Hold Volume up and Down, connect usb (power off mode)
-Wait till your pc detect driver
- Wait till finish

RECOVERY​​
TWRP:
What's new in 2.8.4.0:
Add flashing of boot and recovery images via the TWRP GUI (Find the Images button on the Install page)
Fix some MTP related crashes and bugs.
Eliminate TWRP toggling USB IDs during boot if MTP is enabled
Fix various adb sideload issues
Improve threading of actions
Eliminate separate thread for screen timeout
Update libblkid to 2.25.0
Use power button as back button on watch themes for easier navigation
Add mutex locking to data manager
Improve custom theme handling on encrypted devices
Allow the stock theme to be offset by build flags so we can center a lower res theme on a higher res screen especially for watches with round screens
Click to expand...
Click to collapse
HOW TO FLASH?
Download Mobile Uncle and TWRP img
Move all mobile uncle.apk and TWRP.img to SDCard
Install Mobile Uncle
Open it, run with root access.
Select Recovery Update
Select recovery.img (twrp recovery img)
Choose 'YES' and then choose 'OK' to reboot
Good Luck
Click to expand...
Click to collapse
Download:
TWRP RECOVERY
Mobile Uncle APK
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Credit: TFAndroid and Jiayu.es

ROOT
Kitkat Only
Go to Setting > Security > Tick Superuser Option
Lollipop Only
Flash Supersu 2.46 via TWRP Recovery. Download Here​

FIRMWARE & ROM
Beta 3 Lollipop- Created by @superdragonpt
Download Here​

Q&A​
Q: How to get latest firmware?
A: Open Setting>About Phone>Updates
Q:How to root this phones?
A: Open Setting>Security> Tick Superuser Options
Q:How to flash stock firmware?
A: You can follow this instruction. Here
TWRP for advanced version.
http://forum.xda-developers.com/showpost.php?p=59587733&postcount=86

@Levered: you rock buddy! hope this will get bigger and bigger. if my phone comes without latest firmware, I will make a tutorial on how to do so! keep it up!

Good to see that we have this thread for Jiayu S3 as I am also waiting for this phone to be delivered

Jiayu S3 4G LTE can be used in the US?

Krystyna said:
Jiayu S3 4G LTE can be used in the US?
Click to expand...
Click to collapse
Nope
Just 2G (GSM) and 3G (UMTS/FDD-WCDMA)

M Junaid said:
Good to see that we have this thread for Jiayu S3 as I am also waiting for this phone to be delivered
Click to expand...
Click to collapse
same with my but now i worry if i need to pay addtional taxes...

Levered said:
same with my but now i worry if i need to pay addtional taxes...
Click to expand...
Click to collapse
from where (what website) did you ordered?

M Junaid said:
from where (what website) did you ordered?
Click to expand...
Click to collapse
From aliexpress, now it's on the way to arrive.

Levered said:
From aliexpress, now it's on the way to arrive.
Click to expand...
Click to collapse
My postman just left a fat bill and left ;D so near but still so far away...

i can not use recovery.. after go to mobileuncle.. recovery update..choose file.img.. ask reboot and go to recovery
it is reboot but only show android sleep.. not go to recovery.. how to resolve?

aremafc said:
i can not use recovery.. after go to mobileuncle.. recovery update..choose file.img.. ask reboot and go to recovery
it is reboot but only show android sleep.. not go to recovery.. how to resolve?
Click to expand...
Click to collapse
Thanks for feedback.. i will try to solve later...

Levered said:
Thanks for feedback.. i will try to solve later...
Click to expand...
Click to collapse
Wouldnt even let me choose a file. Would flashify do the trick? Am not too eager to harm my new device
Edit: just installed supersu from playstore and flashed the recovery.img with flashify without any problems!
Sent from my JY-S3 using XDA Free mobile app

haasgo said:
Wouldnt even let me choose a file. Would flashify do the trick? Am not too eager to harm my new device
Edit: just installed supersu from playstore and flashed the recovery.img with flashify without any problems!
Sent from my JY-S3 using XDA Free mobile app
Click to expand...
Click to collapse
good job.:good:

Method of installation TWRP recovery without using the PC.
1. Settings - Security - superuser - enable (get root)
2. From the site aptoid.com download the application jiayu.es.
m.n101ii-2.store.aptoide.com/app/market/es.jiayu.jiayuid/55/8408762/Jiayu
(or from PlayMarket)
3. In this app: Downloads - TWRP 2.8.4.0 - download starts.
4. After you download: Tools ROMs - Device Tools - Install Recovery - Recoverys downloaded - choose twrpS3Brecovery.Zip - installation Recovery will beginning.
Then app asked to restart in the installed recovery - to accept or reject at your discretion.
Everything! TWRP installed! And this without having to use a PC .
More info: teamw.in & tfandroid.es. :good:

@Levered Im a member of tfandroid developers and jiayu.es
Please tell in your post the credits....
Thanks

Levered said:
From aliexpress, now it's on the way to arrive.
Click to expand...
Click to collapse
What store if you dont mind sharing?
thanks

New miui_x800_tora33_6.12.29_6.0.1
https://mega.nz/#!kApWEb6a!jRzyPHtRI...uZ6diuyndUxMOc
(must install with all wipes but without internal storage (there are many changes to applications)
miui8_x800_tora33_6.12.22_6.0.1 only for CN
download : https://mega.nz/#!1JxDha7D!B0RYnz18rYT1xItS1_qxRwQe7UFvHjFww_BlWAAtEFQ
more here : http://www.leeco.re/topic/2015-tora33x800-new-miui_x800_tora33_61222_601_multi_gapps/?page=1
Create Mi Account : https://account.xiaomi.com/pass/register
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. multilanquage
2. Google Keyboard
3. gapps : pre-installed
4. root : pre-installed
5. dolby atmos
6. root explorer
7. Xposed
8. miui + Letv camera
9. doudle tap ? Yes
10. Chinese applications ? Νο
11. and more ...
how to install :
1. install on your compiuter adb and Fastboot drivers https://drive.google.com/file/d/0B0MKgCbUM0itNVB1elljU2NPR0k/view
2. install custom recovery (twrp) , download and extract in your computer https://www.androidfilehost.com/?fid=24580943222145291 , connect the phone with your computer and run "Le1PRO-TWRP-INSTALLER"
go to recovery ( turn the phone off by holding down the Power key , Keep pressing and holding Power Key and Volume+) ,
a) reboot =>recovery ,
b)Wipe=>ADVANCED WIPE and select dalvik/ART cache , system , Data , and cache (but NO internal storage) ,
c) back , back , install=>find and select the miui_x800_tora33_6.12.1_6.0.1 rom , swipe to confirm flash (from left to right) ,
when it is done d). wipe caches and reboot to system
after installation
1) in your phone : settings=>About phone=>press 7 times on Build number=>back=>Developer options=>select USB debugging
2) Unknow sources=>settings=>Additional settings=>Privacy
3) xposed ,
you must install and Xposed v87.0 (from recovery) , there is in your phone in internall storage as Xposed (placed it there the rom)
recovery=>wipe=>ADVANCED WIPE and select dalvik/ART cache , and cache =>back , back , install=>find and select the xposed , swipe to confirm flash (from left to right) ,
when it is done , wipe caches and reboot to system
be careful : if you have an old version, you must uninstall from http://forum.xda-developers.com/attachment.php?attachmentid=3847905&d=1471640681
screenshots : http://www.leeco.re/topic/2015-tora33x800-new-miui_x800_tora33_61222_601_multi_gapps/?do=findComment&comment=25177
thanks to :
miui eu , miui gr ,
MiCode : http://www.micode.net/portal.php
source : https://github.com/micode
@Rogue , @serhat , @RoyalCasin
Credits for "Xposed" :
@rovo89 for creating Xposed
@Chainfire for starting the systemless business
@wanam for his modified Xposed to expand more compatibilities with devices
@DVDandroid for his Material Design Xposed Installer

Hi @tora33, is it for US or CN?

nsmsdz said:
Hi @tora33, is it for US or CN?
Click to expand...
Click to collapse
Hi @nsmsdz , only for CN

Thank you, I hope sometime soon LE will release the source code.
Good job and good luck for other project

and i hope..... but i don't believe it
thanks , brew miui 8 for X900 and le pro 3

tora33 said:
and i hope..... but i don't believe it
thanks , brew miui 8 for X900 and le pro 3
Click to expand...
Click to collapse
is it here?
http://opensource.le.com/
here it has the x900, isn´t it simillar?

@twd123 , LeEco Open Source , and MiCode +Android application open source community, are different things

thanks for the rom... after succesfull installation, my mobile is stuck at the mi logo.. i let it for half hour... still not booting. any idea what to be done?

dhinawithlove said:
thanks for the rom... after succesfull installation, my mobile is stuck at the mi logo.. i let it for half hour... still not booting. any idea what to be done?
Click to expand...
Click to collapse
from recovery , install again the rom , ( Patience only 7-8 minutes )

good day. has anyone seen that now there are 4 differente source codes for x900 in leeco open source websites
http://opensource.le.com/

tora33 said:
from recovery , install again the rom , ( Patience only 7-8 minutes )
Click to expand...
Click to collapse
Thanks @tora33.... the ROM is installed now and its wonderful, with everything working perfect.
only issue i see is, when i try to manually register to a network, it says "com.android.phone has stopped"... i tried clearing app data for phone, SIM toolkit, factory reset, reinstall the rom (there were some suggestions on the web for this error). but still i get this error. any help is much appreciated.

dhinawithlove said:
Thanks @tora33.... the ROM is installed now and its wonderful, with everything working perfect.
only issue i see is, when i try to manually register to a network, it says "com.android.phone has stopped"... i tried clearing app data for phone, SIM toolkit, factory reset, reinstall the rom (there were some suggestions on the web for this error). but still i get this error. any help is much appreciated.
Click to expand...
Click to collapse
I have not problem
View attachment 3988322

tora33 said:
I have not problem
View attachment 3988322
Click to expand...
Click to collapse
ohhh... in that case, let me try a clean install again then.... i made dpi change in build.prop and disabled some mi apps using Rom Toolbox... not sure if thats causing the issue... i shall try and update... Thanks mate

Tried a clean install mate... still the issue is not fixed. anyways.. i luv the rom and using it as i dont need to manually register often... rest everything is working fine... kudos to you for such a wonderful rom. awaiting future updates...

@dhinawithlove , only automatic
New miui_x800_tora33_6.12.29_6.0.1
https://mega.nz/#!kApWEb6a!jRzyPHtRIIz_GA7NvSLHXKDtLyF04uZ6diuyndUxMOc
(must install with all wipes but without internal storage (there are many changes to applications)

CN only or US too?
Is this new version works in US devices?
Thx
tora33 said:
@dhinawithlove , only automatic
New miui_x800_tora33_6.12.29_6.0.1
https://mega.nz/#!kApWEb6a!jRzyPHtRIIz_GA7NvSLHXKDtLyF04uZ6diuyndUxMOc
(must install with all wipes but without internal storage (there are many changes to applications)
Click to expand...
Click to collapse

fpereira_pt said:
Is this new version works in US devices?
Thx
Click to expand...
Click to collapse
unfortunately no, only in CN devices

multi miui8_7.1.13 , http://www.leeco.re/topic/2015-tora33x800-new-multi_miui_x800_tora33_7113_601/?page=1

tora33 said:
multi miui8_7.1.13 , http://www.leeco.re/topic/2015-tora33x800-new-multi_miui_x800_tora33_7113_601/?page=1
Click to expand...
Click to collapse
There is problem whit xposed. I've tried all versions and installation from recovery and installer. arm64 bit version says, that this is arm system and exits with error 1. arm86 version can be installed, but stays not active.

Same more issues:
1. When I install any apk (even small one) from play store there is popup, that this is a lot of data to download and question if I want to download only with WiFi connection. And it is not possible to install any apk without WiFi connection (it doesn't matter what's your answer).
2. Camera shutter sound is always on (no mater what is set).

SuperiorOS Android 11 for Samsung Galaxy A51 – Custom ROM​
February 12, 2021 | By [email protected] | CUSTOM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to Install SuperiorOS Android 11 on Samsung Galaxy A51. SuperiorOS comes with ROM OS Android 11 and basic feature only, Brought to you by: [email protected] Status: Stable, SuperiorOS-Xcalibur-GsiTestProjects-arm64-ab-Vanilla ( ARM64-AB ). This ROM Required: TWRP 3.5.0 Android 11 support One UI 3.0. Use at your own risk, I’m not responsible for bricking your device.
Download​
Your phone must be Installed TWRP Recovery for Android 10. If not, you can read TWRP Root Samsung Galaxy A51 SM-A515F Android 11 DUB1 Firmware ( Recommended )
Download SuperiorOS-Xcalibur-GsiTestProjects-arm64-ab-Vanilla.img.xz ( extract it to get img file, use 7-zip )
Download latest open_gapps-arm64-11.0-nano-20210110-TEST.zip ( if necessary )
Download ChonDoe_Flasher.zip
How to use ChonDoe_Flasher​
Change SuperiorOS-Xcalibur-GsiTestProjects-arm64-ab-Vanilla.img to system.img
Copy ChonDoe_Flasher.zip and system.img to external sd card or Internal Storage. You can also put it into a folder that you want. In the video below I named the folder with “ROM”. Copy both to the ROM folder.
For more detail read How to Install GSI and GAPPS on Dynamic Partition Samsung Galaxy A51
Notes:​The phone must be installed Stock/Official Android 11 for A51, then you can flash the TWRP 3.5.0 Android 11. I don’t recommended install this GSI ROM using TWRP 3.5.0 Android 10, you will face Random rebooting. Read How to Update / Upgrade Samsung Galaxy A51 SM-A515F to Android 11 Official
How to Install SuperiorOS on Samsung Galaxy A51:​
Enter TWRP Recovery Mode: Turn power off, Connect the phone with a USB cable, Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe – Advanced wipe ( select “Dalvik, Cache, Data” ) – Swipe to wipe
Select Install ChonDoe_Flasher.zip and Swipe to confirm Flash
Select Wipe – Format data ( type “yes” and confirm )
Select Reboot – System
Install GApps if necessary​
Enter TWRP Recovery Mode: Turn power off, Connect the phone with a USB cable, Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Install – select open_gapps-arm64-11.0-nano-20210110-TEST.zip Swipe to confirm Flash
Select Reboot – System
Bugs
Fingerprint and small issues
If you want to uninstall this custom ROM and back to stock ROM, just flash the stock ROM to your device. Flashing stock ROM will also uninstall TWRP Recovery and it will back to stock Android Recovery.
Notes / Warning!​
Use at your own risk, I’m not responsible for bricking your device.
Using the incorrect file may brick your device.
If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
If you have a KNOX-enabled device, flash custom rom and Rooting will trip the KNOX WARRANTY VOID status!
If your device storage is encrypted, Rooting will wipe your data !
If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
Make sure to backup your important data before root it.

Remember twrp in this moment no backup or restore system partition. Backup your data in sd card

Reserved news

Hello hacker812c ,I just see I had Android 10 and UI 2.5.
Is there a way to upgrade ,my phone is already rooted .
After that ,can I root your rom with Magisk ?
Thanks from France !

double tap to wake ,works bro ¿

darkshinigami said:
double tap to wake ,works bro ¿
Click to expand...
Click to collapse
Sorry my friend this option is present only in stock

fleafred said:
Hello hacker812c ,I just see I had Android 10 and UI 2.5.
Is there a way to upgrade ,my phone is already rooted .
After that ,can I root your rom with Magisk ?
Thanks from France !
Click to expand...
Click to collapse
Upgrade to Android 11 via ota to dub1
After this root And install
Or
Flash in odin only CP and bootloader
After install CP and BL You continue rooted
Enter in twrp and install custom rom
Refined OS or Superior OS

Hi. Thx for ur work.
Im atm with RefinedUI v2.0 (OneUI3.0 - Android11), using OrangeFox for Recovery.
Can i flash this ROM with this Setup (maybe wipe first and switch to TWRP), or do i have to flash Stockrom first?
Thx.

ZapZarap said:
Hi. Thx for ur work.
Im atm with RefinedUI v2.0 (OneUI3.0 - Android11), using OrangeFox for Recovery.
Can i flash this ROM with this Setup (maybe wipe first and switch to TWRP), or do i have to flash Stockrom first?
Thx.
Click to expand...
Click to collapse
Thanks
I m using refined ui too
To install this ROM enter recovery
Wipe data and install
I not recomend return stock
Using twrp you install New roms

I m using refined ui too

ty for the information.
Can i flash from OrangeFox-Recovery or do i have to switch and flash twrp first?

Quickly enter in twrp
Install Oficial twrp app
Download in Google play
After install open app
Use menu tô Reboot in recovery

ZapZarap said:
ty for the information.
Can i flash from OrangeFox-Recovery or do i have to switch and flash twrp first?
Click to expand...
Click to collapse
Enter in recovery
Wipe cachê and data
Install ROM and magisk

hacker812c said:
Upgrade to Android 11 via ota to dub1
After this root And install
Or
Flash in odin only CP and bootloader
After install CP and BL You continue rooted
Enter in twrp and install custom rom
Refined OS or Superior OS
Click to expand...
Click to collapse
Hello,
OK,done and working well and fast.
But I tried to root with Magisk and no way cause no Ramdisk.
Is there an other way to foot ?
Thanks a lot ,good d'Ay .

fleafred said:
Hello,
OK,done and working well and fast.
But I tried to root with Magisk and no way cause no Ramdisk.
Is there an other way to foot ?
Thanks a lot ,good d'Ay .
Click to expand...
Click to collapse
Yes
[ROOT] ROOT Android 10 and 11 ROM GSI Treble
How to ROOT android 11 PHH Any ROM This these steps have been tested in Havoc OS 4.1 Treble PHH Credits SuperSu apk PHH Credits Scripts @washinson I upload files and Scripts from two threads to update this method. SuperSu apk from Phh Aosp 11 and...
forum.xda-developers.com

Hello again,
Just an other "little" question. I must have touched something wrong and I've got a notch in the BOTTOM of the screen, I retried everything but...

For that, I just found a way...
Auto rotation, rotation allowed to 180 then no rotation :solved.
I didn't understand...
Good night to those who are sleeping !

fleafred said:
For that, I just found a way...
Auto rotation, rotation allowed to 180 then no rotation :solved.
I didn't understand...
Good night to those who are sleeping !
Click to expand...
Click to collapse
Thanks for participate

are there any bugs with brightness? Lower than stock?

xdaf0rum said:
are there any bugs with brightness? Lower than stock?
Click to expand...
Click to collapse
Hello,
It depends on what U call bug.
For me, It's working well and I can even makee It lower than before if désire.