[GUIDE] SU640 ROOT, RECOVERY and KDZ FLASHING

[GUIDE] SU640 ROOT, RECOVERY and KDZ FLASHING - LG Nitro HD

This is not my work, all credits goes to mr. devcon69.
Original Site
- THIS IS INTENDED FOR LG OPTIMUS LTE (SU640) ONLY. PLEASE DON'T TRY ON OTHER LG OPTIMUS LTE VARIANTS.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- I'M NOT LIABLE FOR ANYTHING THAT MIGHT HAPPEN TO YOUR DEVICE. DO AT YOUR OWN RISK.
- PLEASE USE A LAPTOP OR A PC WITH A BACKUP POWER SUPPLY IF POSSIBLE TO AVOID HARD BRICKING YOUR PHONE IN CASE OF POWER FAILURE.
- AVOID USING CHEAP USB CABLES, USE THE ORIGINAL LG CABLE.
- I saved the tutorial for customizing the LG OPTIMUS LTE (SU640) as a PDF document.
- All the applications and the PDF tutorial are included in the zip file.
TUTORIAL AND COMPLETE FILES: (Use Winrar/Winzip to extract files)
[Tutorial deleted, please use the old method at the end of this post or follow this one] We'll wait for mr. devcon69 for update. Sorry guys.
V30C JELLYBEAN FIRMWARE:
Mirror 1:
Mirror 2:
Mirror 3:
V30C_00.kdz MD5: E6EEA12AA5D164AC053203EC03A12AEA
After downloading the file run Md5Checker from the DRIVERS folder. Click Add and browse for the V30c_00.kdz file to verify the MD5 Checksum.
If it's different from the MD5 posted above then the downloaded file might be corrupted or incomplete.
Redownload the file. Use a download manager for faster downloading.
Click to expand...
Click to collapse
CUSTOM ROMS:
1. SU640 V30C ROM by TNT V3
Download: <click here for link>
Credits to tedofu_katozi and TNT Team
Based on Stock Jellybean V30c.
Can be used as daily driver
No SMS Limit
USSD Working
Qslide Available
Fixed bugs from v2
2. SU640 CyanogenMod (CM9/CM10)
Link
GAPPS (GOOGLE APPLICATIONS)
Flash after installing Cyanogenmod. Choose the right package please.
DON'T DO ANY WIPES AT ALL.
ICS/CM9: Link
JB/CM10: Link
Click to expand...
Click to collapse
3. GFAN.COM ROMS (Use google translate and register to the site to access all ROMS).
Link
4. TINHTE.VN ROMS (Use google translate)
Link
Link
5. Some other ROMS and stuffs
Link
To set english as default language on GFAN.COM & TINHTE.VN ROMS:
Open the rom/zip file on your PC with Winrar/Winzip. Open "system" folder and look for the "build.prop" file.
Extract the file and open with notepad or any text editor.
Look for these lines:
ro.product.locale.language=xx
ro.product.locale.region=XX
replace with
ro.product.locale.language=en
ro.product.locale.region=US
Save the file and place it back on the archive. DONE!
In case that the system folder is in "img" format (system.img). Search for ways to extract and edit android img files and how to recompile them.
Click to expand...
Click to collapse
***************************** CREDITS TO ALL THE VIETNAMESE & CHINESE DEVELOPERS *******************************
Click to expand...
Click to collapse
APN SETTINGS FOR GLOBE/TM/SMART/SUN (For Philippines only)
If you're not receiving any settings for your networks GPRS/3G/Mobile Internet configuration then download the file below and flash with CWM.
Don't do any wipes at all.
APN Settings for CWM: <click here for link>
After a successful flash. Go to Settings> More > Wireless & Networks > Mobile Networks > Access Point Names and Select desired setting.
Click to expand...
Click to collapse
DOWNLOAD MODE TROUBLESHOOTING:
If you have problems with booting to download mode.
TURN OFF the device, remove and reinsert the battery. Don’t turn on yet, hold VOLUME UP BUTTON THEN connect to your PC.
Click to expand...
Click to collapse
In case of a bootloop or if the device gets stuck on the bootscreen after a successful flash with stock firmware. Just hold power button to turn off the device, if it doesn't turn off remove the battery instead. Insert the battery to do a FACTORY RESET. Same as booting to CWM Recovery on custom rom.
(Press and hold Volume Down Button + POWER Button. Wait until a FACTORY HARD RESET prompt is displayed then release. Press POWER button TWICE to confirm FACTORY RESET)
Click to expand...
Click to collapse
IN CASE YOU'RE HAVING PROBLEMS WITH THIS METHOD TRY THE OLD ONE HERE:
TUTORIAL AND COMPLETE FILES: (Use Winrar/Winzip to extract files)
Mediafire
Mirror 2: GDrive
Mirror 3: FileFactory
V10i GINGERBREAD FIRMWARE:
Mirror
Mirror 2: GDrive
Mirror 3: Mediafire
(Join the files with HJSPLIT. A "V10i_00.kdz" file will be created)
Part 1
Part 2
Part 3
Part 4
Part 5
Click to expand...
Click to collapse
---------------------------------------------------------------------------------------
If you experience FC/not responding/errors on flashing the KDZ file TRY THIS METHOD.

Lg Nitro HD(P930/P935) rom ported for Su640
Thanks man! this is a precious guide. i used and successfully flash Cm9 on my phone!
i am just wondering if there is any At&T or Bell's rom ported for SU640 as i got one for LU6200 here
http://forum.xda-developers.com/showthread.php?t=1859922
thanks in advance, hope you will help me out!
GBU :good:

Re: [GUIDE] SU640 Rooting and CWM Recovery
I don't know if there's one, have you tried searching on other sites? I think there's a method where you will have to flash baseband.img in order to install roms for p93x. I didn't try, I'm happy with miui. and I'm not sure about the method.

well thanks! i will search that. thanks for help

help
ok brothers i have done every thing fine i succesfully instaled custom rom on it but after one day i wanted to change the rom so i made backup of it and since then .I HAVE MESSED UP AND I DONT KNOW WHAT TO DO I INSTALLED THE ROM AND MADE BACKUP OF IT THROUGH RECOVERY AND NOW AFTER THAT WHEN I REBOOT MY LG SU640 IT STARTS BUT AFTER COMPLETLY OPENING WHEN I UNLOCK THE LOCK SCREEN IT HANGS AND RESTARTS AND SAME SAME AGAIN AND AGAIN. I REINSTALLED THE ROM ClEARED EVERYTHING AND REINSTALLED THE ROM STILL THE PROBLEM PRESIST.... GOT ANY IDEAS BROTHER? I TRIED ANOTHER ROM ALSO ON IT AND STILL THE SAME PROBLEM...

Re: [GUIDE] SU640 Rooting and CWM Recovery
That's weird. Have you wiped the device? Wipe data, cache, and dalvik?

Re: [GUIDE] SU640 Rooting and CWM Recovery
Danial Ahmad said:
ok brothers i have done every thing fine i succesfully instaled custom rom on it but after one day i wanted to change the rom so i made backup of it and since then .I HAVE MESSED UP AND I DONT KNOW WHAT TO DO I INSTALLED THE ROM AND MADE BACKUP OF IT THROUGH RECOVERY AND NOW AFTER THAT WHEN I REBOOT MY LG SU640 IT STARTS BUT AFTER COMPLETLY OPENING WHEN I UNLOCK THE LOCK SCREEN IT HANGS AND RESTARTS AND SAME SAME AGAIN AND AGAIN. I REINSTALLED THE ROM ClEARED EVERYTHING AND REINSTALLED THE ROM STILL THE PROBLEM PRESIST.... GOT ANY IDEAS BROTHER? I TRIED ANOTHER ROM ALSO ON IT AND STILL THE SAME PROBLEM...
Click to expand...
Click to collapse
Ate you sure that the rom you installed is for su640?. Installing ROMs for p93x is incompatible with our device. Make sure that the developer of the rom states that its compatible for su640.

well thanks! i will search that. thanks for help

Dear expressions104!
TUTORIAL AND COMPLETE FILES links are dead.
Is it possible that you may re-upload the files.
Looking forward.

Links are up..

Thanks OP!
This made my life easy.

Thread updated! Links are up!
..

expressions104 said:
Links are up..
Click to expand...
Click to collapse
burahin mo n to pre, pra sating mga pinoy lang to eh.. tsk tsk

Hindi naman po masama mag share sir. Buburahin ko lang po ito pag kailangan ng burahin. Plus meron po akong permission from mr. Devcon69 na irepost dito sa xda ung thread.

Thanks for the guide but i have a problem.
I cant install CWM recovery. Tried it two times but to no avail. The tutorial states that CWm is installed adn then it doesnt boot into CWM.
The device rooted succesfully though.
Any solution?

Vol down + power button doesnt take you to recovery? Have you tried rebooter?
In case cwm is not installed try it once again. If it has the same result try the OLD METHOD.

rooting and cwm recovery
Arhum1994 said:
Thanks for the guide but i have a problem.
I cant install CWM recovery. Tried it two times but to no avail. The tutorial states that CWm is installed adn then it doesnt boot into CWM.
The device rooted succesfully though.
Any solution?
Click to expand...
Click to collapse
it simply means that your mobile is not rooted properly.thats why mobile not rebooting to cwm.
kindly root the mobile properly.if it again gives error , tell me

Attach a picture of the rooting guide after that it takes five minutes until the tutorial states that it is booting into CWM which it doesnt. I tried using rebooter to boot into CWM but using that i stumble upon a dead android with a exclamation mark over its stomach after the phone shuts down and tries to reboot into CWM.
Any solution?. And i updated my phone thorough LG software for the jellybean update.

Hi Guys, I'm currently on Custom PACROM and I'd like to try this Rom. Do I need to Flash this through LG Flash software? or I can just flash this through recovery?

Bootloop on SU640 V30C ROM by TNT V3
hey im having bootloop on that rom. ive done clean wipes but still bootlooping.
is it me whos doing wrong?

Related

[ROM][C6903][LB&UB]z1slim v0.4[4.3][NO BLOAT][FULL ROOT][XZDR][09/01]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction:
This is my first ROM for any device, there will probably be bugs. I am not responsible for anything that happens to YOUR device as a result of flashing this. All releases are tested before posting to minimize the risk but there is always a chance something could go wrong!
My aim with this rom was to clean out all the useless rubbish I never use. This includes all social networking integration as I only see this as bloat, being as most of it is installable from the market.
Maybe someone else would like this too, so I am sharing my work.
Downloads:
z1slim.flashable.v0.4.zip (XDA Direct)
z1slim.flashable.v0.4.zip (XDA Torrent)
MD5: f12ac5a793edd2a25f7d9c3e758fda38
290-stripped.ftf
MD5: d06d6a554ba012d3ca0fb6bcd0f526b3
If you need something I have removed, download the AROMA installer below. It has all the apps and integration that I have removed from the stock rom in a format you can easily pick and choose what to reinstall. Just install it in recovery and tick any apps you want back! All apps within this installer are also deodexed.
z1slim.re-bloat.v1.zip
MD5: 91416eb62e0ddafd5257da28166fddac
How to install:
YOU WILL LOSE ALL USERDATA ON INTERNAL SDCARD BY DOING THIS. SO BACKUP FIRST!
1: Flash c6903 stock version 534 from this link: https://mega.co.nz/#!K1QD1bSK!JkgNvz3Tqb6lq4brVUEyZGraOjMQuTuzn8IaEFhQhUI
2: Root using bin4rys tool: http://forum.xda-developers.com/showthread.php?p=31545627
3: Install XZ1 DualRecovery 2.7.73 beta from [NUT]'s website: http://forum.xda-developers.com/showthread.php?t=2261606
4: Copy z1slim.flashable.v0.4.zip to external sdcard
4: Reboot into TWRP
5: Click wipe -> Advanced wipe -> Tick dalvik+cache+system+internal data -> swipe to wipe
6: Format data -> Type yes
7: Install z1slim.flashable.v0.4.zip
8: DO NOT REBOOT! Instead go to reboot menu and click power off
9: Flash 290-stripped.ftf using FlashTool
10: Enjoy the rom!
First boot will take a while if you have done a factory reset.
Alternatively if you do not have an external sdcard you can sideload the zip
this is neccessary because we will format internal storage, so it cannot be there.
If you already have a rooted 4.3 ROM installed with XZDR working properly, you can just download the flashable zip, wipe data etc and install it from recovery. If you are coming from a previous version of this ROM then you only need to install the zip. No wipe required.
Changelog:
Version 0.4
-Removed all themes and wallpapers except default
-Removed chrome and put back stock browser
-Removed almost all social integration again (Didnt break rom this time!)
+Updated DualRecovery to 2.7.73 Beta (thanks again [NUT]!)
+Updated all sony apps that are left
+Updated Google play store
+Added white balance settings and a script to reapply settings at boot (Thanks to RyokoN!)
+Deodexed apps and framework
Version 0.3
-Removed further O2 customization
+Added social network integration again as it broke the ROM
+Adblock hosts file
+Customized the install script
Version 0.2
-Removed the rest of the bloat + apps you can get from market
-Removed social network integration
+Stock bootanimation
+Fixed full root (System now mounts R/W on LB)
+Fixed language selection appearing every boot
Version 0.1
-Based on 14.2.A.0.290_O2-UK
-Removed O2 Branding
-Removed all useless bloatware apps
-Removed anonymous statistics
-Removed My Xperia app
-Removed stock browser as chrome is included
+Rooted (LB & UB) by [NUT]
+DualRecovery 2.7.71 by [NUT]
+SuperSU by Chainfire
Bugs:
None known as of now with the base rom.
When restoring twitter integration there seems to be an issue signing in. Twitter app works fine though. - Thanks to sg1969 for finding this.
Credits:
[NUT] for kitchen + 4.3 Root + XZ1 DualRecovery (damn he's good!) - Click here to donate to [NUT]
Chainfire for SuperSU
zyclops1 for figuring out which rom we had to start from
BSDgeek_Jake - Adblock hosts file
RyokoN - White balance settings port
Myself
If I have missed anyone, give me a slap in a pm.
DONATIONS ARE NOT REQUIRED! But if you want to thank me for my work, I wouldn't say no.
Click here to buy me a beer!
If you want to use this as a base for your own ROM. You are welcome to. Please just give me and the other guys some credit!
XDA:DevDB Information
z1slim, a ROM for the Sony Xperia Z1
Contributors
GavTheStoner
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock 14.1.G.1.534 firmware or working 4.3 with recovery and root
Based On: Stock 4.3 version 290
Version Information
Status: Beta
Current Beta Version: 0.4
Beta Release Date: 2014-01-13
Created 2014-01-08
Last Updated 2014-01-18

Reserved.

Good to see more DEVS here and there, let me give you an advice, people will not go back to 534 if they're already in .290 with working recovery, because i didnt go back to 534 since the first semi-rooted 290 i had to always flash the flashable recovery that i had! now if you read the NUT thread you can figure out that if you already have a working recovery or you were on any 290 from iHackers or ROMAUR or even Monx you'll be able to just flash the update zip that is in the NUT to get Full ROOT!
anyways that was only my opinion
Thanks and good luck.

Nice mate.
You are not taking anything more than others who are posting stupid things like - "new album upgrade".
Learn and upgrade your ROM, we need good guys here.
Maybe this isn't heavy development but it's one step up and I'm 100% sure it'll be great ROM one day.
You are creating something new, unlike some others guys who are constantly whining and doesn't contribute this community at all.
BTW what @Simow.b saying is correct, you should add that in OP.
Just write: if you are already on 290 or any ROM with working recovery just flash ROM through recovery, flash recovery, power of, flash ftf and restart.
:thumbup:
Sent from my C6903 using Tapatalk

funky0308 said:
Nice mate.
You are not taking anything more than others who are posting stupid things like - "new album upgrade".
Learn and upgrade your ROM, we need good guys here.
Maybe this isn't heavy development but it's one step up and I'm 100% sure it'll be great ROM one day.
You are creating something new, unlike some others guys who are constantly whining and doesn't contribute this community at all.
BTW what @Simow.b saying is correct, you should add that in OP.
Just write: if you are already on 290 or any ROM with working recovery just flash ROM through recovery, flash recovery, power of, flash ftf and restart.
:thumbup:
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
Thank you for the kind words my friend

Simow.b said:
Thank you for the kind words my friend
Click to expand...
Click to collapse
We have to support guys who are willing to take their free time and work for us - free.
Someone will make something smaller, someone will make something big - but that's not important, what's important is that they are trying and learning and that's great.
Sent from my C6903 using Tapatalk

funky0308 said:
We have to support guys who are willing to take their free time and work for us - free.
Someone will make something smaller, someone will make something big - but that's not important, what's important is that they are trying and learning and that's great.
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
I agree with that !

Simow.b said:
Good to see more DEVS here and there, let me give you an advice, people will not go back to 534 if they're already in .290 with working recovery, because i didnt go back to 534 since the first semi-rooted 290 i had to always flash the flashable recovery that i had! now if you read the NUT thread you can figure out that if you already have a working recovery or you were on any 290 from iHackers or ROMAUR or even Monx you'll be able to just flash the update zip that is in the NUT to get Full ROOT!
anyways that was only my opinion
Thanks and good luck.
Click to expand...
Click to collapse
So is there way to get recovery back I run ihackers but I don't see any recovery?

adamo86 said:
So is there way to get recovery back I run ihackers but I don't see any recovery?
Click to expand...
Click to collapse
Try to flash the latest windows recovery from NUT and follow the steps:
1- Make sure you have USB debugging turned ON.
2- download XZ/ZL/TabZ/Z1/ZU-lockeddualrecovery[VERSION]-BETA.installer.zip from http://nut.xperia-files.com
Windows:
3- unpack at C: or somewhere you will remember!
4- navigate to the resulting directory and look for install.bat, double click it to run;
let me know if this worked for you

Simow.b said:
Try to flash the latest windows recovery from NUT and follow the steps:
1- Make sure you have USB debugging turned ON.
2- download XZ/ZL/TabZ/Z1/ZU-lockeddualrecovery[VERSION]-BETA.installer.zip from http://nut.xperia-files.com
Windows:
3- unpack at C: or somewhere you will remember!
4- navigate to the resulting directory and look for install.bat, double click it to run;
let me know if this worked for you
Click to expand...
Click to collapse
I can't see the version you mentioned in the link.
I'm on LB so would it work I have partial root though.

adamo86 said:
I can't see the version you mentioned in the link.
I'm on LB so would it work I have partial root though.
Click to expand...
Click to collapse
i'm also on LB here's the windows version
http://nut.xperia-files.com/?dlid=WjEtbG9ja2VkZHVhbHJlY292ZXJ5Mi43LjcxLUJFVEEuaW5zdGFsbGVy
and after that flash this:
http://nut.xperia-files.com/?dlid=WjEtbG9ja2VkZHVhbHJlY292ZXJ5Mi43LjcxLUJFVEEuZmxhc2hhYmxl
you could always try my friend if it doesnt work then you should do the steps again from 534 but this time when installing the recovery install the one that i have posted now.

Simow.b said:
i'm also on LB here's the windows version
http://nut.xperia-files.com/?dlid=WjEtbG9ja2VkZHVhbHJlY292ZXJ5Mi43LjcxLUJFVEEuaW5zdGFsbGVy
and after that flash this:
http://nut.xperia-files.com/?dlid=WjEtbG9ja2VkZHVhbHJlY292ZXJ5Mi43LjcxLUJFVEEuZmxhc2hhYmxl
you could always try my friend if it doesnt work then you should do the steps again from 534 but this time when installing the recovery install the one that i have posted now.
Click to expand...
Click to collapse
I won't fall any boot or brick problems would I.thanks

adamo86 said:
I won't fall any boot or brick problems would I.thanks
Click to expand...
Click to collapse
if everything's goes well then you will get a fully working recovery plus a nice full rooted ROM!
if not then you should just do the steps from NUT thread and you'll be fine

Simow.b said:
if everything's goes well then you will get a fully working recovery plus a nice full rooted ROM!
if not then you should just do the steps from NUT thread and you'll be fine
Click to expand...
Click to collapse
Link please

adamo86 said:
Link please
Click to expand...
Click to collapse
Here you go :
http://forum.xda-developers.com/showthread.php?t=2572988

Simow.b said:
Here you go :
http://forum.xda-developers.com/showthread.php?t=2572988
Click to expand...
Click to collapse
Didn't work the phone reboots back up dosent go into recovery.

Jonster111 - Nobody is forcing you to click on this thread or download this ROM. It is quite apparent what it is from both the thread title and the description in the first post.
Thanks Simow.b and funky0308 for the real support
Who knows, maybe this will one day be a base for a proper modified rom. Until then, I still need to remove the useless rubbish!
----
Ive just noticed that its not really got full root so have to fix that too. Cant mount system R/W but have got latest XZDR... Weird.

adamo06 please follow the guide in [NUT]'s thread properly. You need to download the 534 version from his OP to get the rom to install properly, or at least have a rooted 257 with recovery already. Also, please take discussion about that to the appropriate thread.

adamo86 said:
Didn't work the phone reboots back up dosent go into recovery.
Click to expand...
Click to collapse
Follow my steps then:
1- flash 534 using flashtool
2- root it using bin4ry's tools
3- install NUT recovery (the ones that i have given) install windows version and when you're on the recovery flash the one that is flashable! do not reboot!
4- flash the 290 from any DEV i would recommend iHackers v2.0 do not reboot!
5- flash xposed for lb from Monx and again (do not reboot! )
6- flash the update zip for 290 from NUT thread
7- wipe cache/dalvik
8- power off the phone from recovery
9- flash the kernel for 290
10- boot the phone and wait!
Hope this helps now
---------- Post added at 03:00 PM ---------- Previous post was at 02:58 PM ----------
GavTheStoner said:
Jonster111 - Nobody is forcing you to click on this thread or download this ROM. It is quite apparent what it is from both the thread title and the description in the first post.
Thanks Simow.b and funky0308 for the real support
Who knows, maybe this will one day be a base for a proper modified rom. Until then, I still need to remove the useless rubbish!
----
Ive just noticed that its not really got full root so have to fix that too. Cant mount system R/W but have got latest XZDR... Weird.
Click to expand...
Click to collapse
You're always welcome my friend

Version 0.2 was pulled due to a fatal bug.
Version 0.3
-Removed further O2 customization
+Added social network integration again as it broke the ROM
+Adblock hosts file
+Customized the install script

TWRP CMD Installer for P6 V1.1.3

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTICE: Go here for my newer tool here http://forum.xda-developers.com/showthread.php?p=52973530
ABOUTThis is a very simple CMD UI to install the TWRP (Jellybean and Kitkat) for the P6, as well as to revert back to stock recovery. There is also option to unlock bootloader, but I'm not very sure that it works.
Hope this makes flashing TWRP/Stock recoveries easier!
This is my first time making something for xda. I would be excited to hear any feedback or suggestions.
FEATURES
TWRP Installing for Jellybean, Kitkat B506, and OMNI ROM.
Reverting to stock recovery for Jellybean and Kitkat B506.
Entering into recovery.
Unlocking device (untested)
REQUIREMENTS
Unlocked Bootloader (You can use this tool or install B506)
KITKAT B506 Based ROM
OMNI Based ROM
JELLYBEAN Based ROM
DRIVERS FOR HUAWEI P6-U06 or P6-U00
DOWLOADS
TWRP Installer V1.1.3b
TWRP Installer V1.1.3a
TWRP Installer V1.1.2
TWRP Installer V1.1.0
TWRP Installer V1.0.1
TWRP Installer V1.0.0
INSTRUCTIONSHere are the steps:
1. Download file here. http://goo.gl/6nONyf
2. Extract the rar to desktop.
3. Run "TWRP_Installer.exe". I don't believe you need admin settings.
4. And just follow instructions on the screen from there.
WHAT IF MY PHONE WON'T BOOT?Do not worry! Just follow the instructions below!
However, you will have to enter into fastboot mode manually before you use the tool. This is how:
1. Plug in your phone to a computer.
2. Press down power and volume(-) for 10 seconds, and wait for your device to turn off. Do not let go.
3. After you see Huawei logo for 2 seconds, release the power button.
4. After 5 seconds, release the volume (-) button.
5. This will enter into fastboot mode, and then you can continue to use the tool. From there, you would either:
a) Install Stock Kitkat/Jellybean Recovery, b) TWRP Kitkat/Jellybean
6. Enter recovery mode. If you choose stock recovery, download an UPDATE.APP and install the OS likewise. If you choose TWRP, download a custom rom, and install the OS likewise.
CREDITS @surdu, @TeamWin, @tauio111 .
Here is the OP of TWRP. Make sure you thank surdu for his hard work.
http://forum.xda-developers.com/showthread.php?t=2709353
Here is the OP for bootloader unlock. Make sure to thank tauio111.
http://forum.xda-developers.com/showthread.php?p=50741449
Here is the old work that I had posted. This gave me the thought to make the CMD installer.
http://forum.xda-developers.com/showpost.php?p=49986799&postcount=10
And don't forget to thank me of course:laugh:
If you repost my work, make sure to give credits to me.
SCREENSHOTS
CHANGELOG2014-Apr-07 - V 1.0.0
Initial Release
2014-Apr-09 - V 1.0.1
Added Support For Jellybean
Added Bootloader Unlock
Added Boot.img Restore
2014-Apr-12 - V 1.1.0
Removed issue for external dll dependency
Removed .bat file dependency to avoid accidental executing
Move recovery.img, boot.img, adb.exe, fastboot.exe into another folder, easier to find TWRP_Installer.
2014-Apr-14 - V 1.1.2
Updated to newest surdu's 2.7.0.0 TWRP
Included boot.img OMNI and B506 for TWRP internal storage support
Fixed a bug issue with option 5 and 6
2014-Apr-24 - V 1.1.3a
Fixed an issue with option 1
2014-May-5 - V 1.1.3b
Added support to Windows XP
XDA:DevDB Information
CMD TWRP Installer, Tool/Utility for the Huawei Ascend P6
Contributors
bokchoi2020, surdu, tauio111
Version Information
Status: No Longer Updated
Created 2014-07-04
Last Updated 2014-07-04

thx

Curcio said:
thx
Click to expand...
Click to collapse
No problem! If I have time, next update I may include choice to install Jellybean Twrp and Jellybean stock!

OK, Update released!
To 1.0.1! More details in the OP thread!

My Phone is Stuck!
Please help,
My phone is stuck after i accidentally installed the OMNI boot image from this tool on the stock Kitkat B506. The problem is that "TWRP_Installer_1.0.1.exe" was not working, asking for some missing .dll. Then i just double clicked on "omni_boot_kitkat.bat" and without waiting for my input or confirmation, it went ahead and did something. Now i am stuck on the android logo. I don't have TWRP also. Please help me to bring the system back to normal.
-Majrul

majrul said:
Please help,
My phone is stuck after i accidentally installed the OMNI boot image from this tool on the stock Kitkat B506. The problem is that "TWRP_Installer_1.0.1.exe" was not working, asking for some missing .dll. Then i just double clicked on "omni_boot_kitkat.bat" and without waiting for my input or confirmation, it went ahead and did something. Now i am stuck on the android logo. I don't have TWRP also. Please help me to bring the system back to normal.
-Majrul
Click to expand...
Click to collapse
Click the stock_boot_kitkat.bat to revert to stock boot.img.
Or just do
fastboot flash boot boot.img
I will look into the issue with the dll library being missing.
Sent from my P6-U06 using xda app-developers app

bokchoi2020 said:
Click the stock_boot_kitkat.bat to revert to stock boot.img.
Or just do
fastboot flash boot boot.img
I will look into the issue with the dll library being missing.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
I am unable to, because i am getting this error everytime:
error: device unauthorized. Please check the confirmation dialog on your device.
And there is nothing on the screen except an android logo. I am unable to do anything!

majrul said:
I am unable to, because i am getting this error everytime:
error: device unauthorized. Please check the confirmation dialog on your device.
And there is nothing on the screen except an android logo. I am unable to do anything!
Click to expand...
Click to collapse
Shoot.... but how is that possible?
When you install the omni boot.img, it requires usb debugging enabled, with RSA fingerprint from the computer to be whitelisted.
It installed, so clearly you had the RSA fingerprint whitelisted...
But now when you try to install the stock boot.img now it blacklisted the RSA fingerprint...
Ok, you can give this a shot but I'm not sure if it will work.
1. Get an SD card, put the B506 update on it.
2. Reboot into recovery with power and (+)(-) buttons.
3. Then reinstall the B506 update.
The update should replace the boot.img.
If it still doesn't work, do a factory reset/ partition wipe from the recovery.
I'm sorry for the inconvenience that this may have caused you.
I will look deeply into this issue.

Can u explain more? I don't get it
Sent from my GT-S7562 using xda app-developers app

Thy Boss said:
Can u explain more? I don't get it
Sent from my GT-S7562 using xda app-developers app
Click to expand...
Click to collapse
Basically my exe didn't start on his computer because I didn't compile the program with a static library. I'm going to fix that.
Then he went ahead and tried running one of my scripts, which installed the OMNI kernel. But he was using B506 stock, which then made his device not boot due to different ramdisk config.
I then suggest that he reflash the stock boot.img which I included in another batch file, but then the OMNI kernel asks for permissions for USB debugging.
His phone doesn't boot in the Android UI so he can't access the confirmation box that allows debuging.
He doesn't have TWRP, so he can't flash recovery boot.img that way either.
So now the only solution is to reinstall the ROM via UPDATE.APP.
Sent from my P6-U06 using xda app-developers app

bokchoi2020 said:
Basically my exe didn't start on his computer because I didn't compile the program with a static library. I'm going to fix that.
Then he went ahead and tried running one of my scripts, which installed the OMNI kernel. But he was using B506 stock, which then made his device not boot due to different ramdisk config.
I then suggest that he reflash the stock boot.img which I included in another batch file, but then the OMNI kernel asks for permissions for USB debugging.
His phone doesn't boot in the Android UI so he can't access the confirmation box that allows debuging.
He doesn't have TWRP, so he can't flash recovery boot.img that way either.
So now the only solution is to reinstall the ROM via UPDATE.APP.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Followed the steps, got the phone working back again, but unfortunately lost all the phone memory data like call logs and sms. I will request you to please modify this program so that it doesn't installs anything without user confirmation.
I was sincerely looking for such a tool. I thank you for your effort, i am sure you will take care of the changes immediately.

majrul said:
Followed the steps, got the phone working back again, but unfortunately lost all the phone memory data like call logs and sms. I will request you to please modify this program so that it doesn't installs anything without user confirmation.
I was sincerely looking for such a tool. I thank you for your effort, i am sure you will take care of the changes immediately.
Click to expand...
Click to collapse
Yes, thanks for your understanding. For next release I will try to integrate the bat files into the exe so no more accidental installation by the end user will occur. Maybe have a confirmation before the install.

majrul said:
Followed the steps, got the phone working back again, but unfortunately lost all the phone memory data like call logs and sms. I will request you to please modify this program so that it doesn't installs anything without user confirmation.
I was sincerely looking for such a tool. I thank you for your effort, i am sure you will take care of the changes immediately.
Click to expand...
Click to collapse
Ok, Update will be soon.
Changes include .exe working without external dll support, and no more bat files.

bokchoi2020 said:
Ok, Update will be soon.
Changes include .exe working without external dll support, and no more bat files.
Click to expand...
Click to collapse
That's great. Really appreciate your efforts. I am waiting to downloading it again..

Ok, I just updated it to 1.10! If there are any issues, please tell me!
Changes include removing the .bat files and making the .exe non-dependant on external .dll libraries.
The images are put into a sources folder to make using the tool more easier for end user.

bokchoi2020 said:
Ok, I just updated it to 1.10! If there are any issues, please tell me!
Changes include removing the .bat files and making the .exe non-dependant on external .dll libraries.
The images are put into a sources folder to make using the tool more easier for end user.
Click to expand...
Click to collapse
Yes twrp.exe work good. Not any error this time.

bokchoi2020 said:
Ok, I just updated it to 1.10! If there are any issues, please tell me!
Changes include removing the .bat files and making the .exe non-dependant on external .dll libraries.
The images are put into a sources folder to make using the tool more easier for end user.
Click to expand...
Click to collapse
Wow. Works perfect! Thanks a lot once again for such a nice tool!

Super travail
Un grand merci pour ce bon boulot , sa marche nickel , continu comme sa : O: O: O

olhamike said:
Un grand merci pour ce bon boulot , sa marche nickel , continu comme sa : O: O: O
Click to expand...
Click to collapse
Pas de probleme!
Desole si mon francais n'est pas bon.
Sent from my P6-U06 using xda app-developers app

Works fine for me and solved my problems.
Absolutely an useful application, thanks alot bro

LG Flash Tool 2014 - The best way to Flash LG KDZ Rom

You can donate me a beer via paypal : [email protected]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Version:
+ Build 25/06/2014 : Initial Version
+ Build 27/06/2014 : Fix not working with windows XP
+ Build 03/07/2014 : Fix not working with some machine run windows 8/8.1 64bit
2. What's news:
+ This is a modified version of UpTestEX v1.2.3.1 and working with all LG Smartphone Models
+ Re-design GUI simpler.
+ Working without LG Mobile Support Tool installed !
+ Working with lastest version of LG Mobile Support Tool.
+ Dont need to use hosts file or run http server to bypass anymore !
+ Default language is set to English. Don't need to choose language any more !
3. Tutorial:
+ Download and setup LG Driver : https://www.androidfilehost.com/?fid=24052804347802528
+ Download LG Flash Tool 2014 tool and extract :
http://www.mediafire.com/download/fwrcd3pdj0svjtb/LG_Flash_Tool_2014.zip
+ Enter to Download Mode and plug USB into your PC
+ WARNING : Remember copy KDZ file into LG Flash Tool 2014 folder
+ Run LGFlashTool2014.exe and do as following pictures :
+ If you cannot run LGFlashTool2014.exe, please install Visual C++ Runtime Library : https://googledrive.com/host/0B9l4QOCXUmxXV19jN1ZrTnBwdTQ/VC_RedistInstaller.exe[/SIZE]
Normal Flash: Flash ROM without losing any data. Only use this when you need to fix system error. Beware of boot loop when flashing ROM that differ from current ROM on your phone or MOD ROM.
CSE Flash: Choose this option when you need a fresh format. All data will be gone. It's suitable for upgrading or downgrading ROM or simply use this when you need to back to Stock.
No need to choose desired language, it automatically change to English as a default setting.
+ Wait until 100% to complete !

Can you translate immage of tools ?

for gods sake don't quote the whole OP

Sorry for this
Inviato dal mio LG-D802

instead of sorry you could delete the whole quote

midan said:
Can you translate immage of tools ?
Click to expand...
Click to collapse
Okay i'll do later but you just focus on red and blue circle

Is it working on Windows 8.1? I am at custom 4.4.2 Rom, if I want to go back to stock I use normal or cse flash?

midan said:
Can you translate immage of tools ?
Click to expand...
Click to collapse
Normal Flash: Flash ROM without losing any data. Only use this when you need to fix system error. Beware of boot loop when flashing ROM that differ from current ROM on your phone or MOD ROM.
CSE Flash: Choose this option when you need a fresh format. All data will be gone. It's suitable for upgrading or downgrading ROM or simply use this when you need to back to Stock.
Last step: No need to choose desired language, it automatically change to English as a default setting.
Sorry for my poor translation but I swear this post contain the same information with above image. :victory::victory: kaka

good job
i will use this and CSE flash it`s better than normal (no bugs)

tung2003us said:
Normal Flash: Flash ROM without losing any data. Only use this when you need to fix system error. Beware of boot loop when flashing ROM that differ from current ROM on your phone or MOD ROM.
CSE Flash: Choose this option when you need a fresh format. All data will be gone. It's suitable for upgrading or downgrading ROM or simply use this when you need to back to Stock.
Last step: No need to choose desired language, it automatically change to English as a default setting.
Sorry for my poor translation but I swear this post contain the same information with above image. :victory::victory: kaka
Click to expand...
Click to collapse
haha thanks dude ill update your translation on my first post

leandronb said:
Is it working on Windows 8.1? I am at custom 4.4.2 Rom, if I want to go back to stock I use normal or cse flash?
Click to expand...
Click to collapse
you should use cse flash to prevent bootloop

Great tool
This is a Great Tool ! Very simple GUI. I needed this 2 days ago .
That Vietnamese language thru me for a loop ! lol :good: Thank you for your translation.

Qverse said:
This is a Great Tool ! Very simple GUI. I needed this 2 days ago .
That Vietnamese language thru me for a loop ! lol :good: Thank you for your translation.
Click to expand...
Click to collapse
I updated the tutorial guide with english . Please read !

This looks very nice! will definetly try this next time i need to go back to stock! )

For d802, CDMA or 3GCT?
Thanks!

Can i use also on my D802 german version?
Edit: I have download the Tool and have see i can select 3GQCT. But whene i select this i dont have the CSE FLash button. Why only have CDMA this button? I think 80% from all User here have a D802 and this need 3GQCT.

All model can choose CDMA mode. Dont worry about that it's same as 3GQCT. select CDMA and click on CSE Flash to make a fresh stock rom !

Are you sure i can use cdma on a D802? In a other Thread here i have read 3GQCT must select?
Gesendet von meinem LG-D802 mit Tapatalk

Sir quangnhut123 how do i access the download mode again, when every time i press power + vol down, it goes to the factory reset then go to twrp?

When I run LGFlashTool2014.exe nothing happens. The application keeps running in the background but never shows up on screen.
Edit: Need to right click and Run as Administrator. Now it's running.

[ROM] Stock 30a/30b/30d/30e/30f-eur/30f-vdf/30h-vdf - flashable zip [20160528] - NEW!

New build from D80230a/D80230b/D80230d/D80230e/D80230f
Still has recovery after flash.
Please Checking MD5 checksum before Flash...
For The guys from EUR zone I made flash able ZIP for a new KDZ please visit this thread as below
[ROM] SRKG2-1-00 (ESA/EUR) [3 In 1 ROM with Thai Food Names] - 20150517
Don't ask about what different between the previous version I don't have any change logs.
Download link
SRK-D80230F-EUR_20160528_droidth (NEW) Please read instruction as below for new build:
https://www.androidfilehost.com/?fid=24562946973630919
SRK-D80230H_20160107_droidth:
https://www.androidfilehost.com/?fid=24352994023707839
SRK-D80230d_EUR_20151124_droidth:
https://www.androidfilehost.com/?fid=24269982087003734
SRK-D80230f_20150926_droidth:
https://www.androidfilehost.com/?fid=24052804347822701
SRK-D80230e_20150417_droidth:
http://bit.ly/1b1BA2H
Download link
SRK-D80230d_20150403_droidth :
http://bit.ly/1ENqBXF
Download link
SRK-D80230b_20150425_droidth:
http://bit.ly/1bELkB0 - google drive mirror1
http://bit.ly/1IWE7qf - google drive mirror2
http://bit.ly/1JEX5BL - google drive mirror3
http://bit.ly/1E4uu7D - mirror MEGA1
http://bit.ly/1Gu9JmR - mirror MEGA2
Bittorrent format
https://www.androidfilehost.com/?fid=96042739161893331
(Unzip SRK-D80230b_20150425_droidth.zip then use bittorrent to Download)
Download link
SRK-D80230a_20150403_droidth:
http://bit.ly/1yIejs7
Download link
SRK-D80230a-SG_201500505_droidth (SEA) :
https://www.androidfilehost.com/?fid=23991606952597843
Mirror torrent file :
- D80230a
- D80230a
- D80230d
- D80230e
If you like my work , you can donate me with my email in paypal
My email : [email protected]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mirror link :
- https://mega.co.nz/#F!Fg9URAbS!EhGVUeuzaQg0-uMX0_puMw (SRK-D80230a_20150403_droidth,SRK-D80230d_20150403_droidth)
From Member of my fackbook Fanpage @radoslaw Rusin @reza Sadeghi
SRK-D80230e_20150417_droidth.zip
https://mega.co.nz/?hc_location=ufi#!0EMDwCRT!07XccJVFYLu0_WcyEEbuTnlgeVWGuZEJgGaSuCC6NtY
http://fs2.filegir.com/gladiators1980/SRK-D80230e_20150417_droidth.zip?hc_location=ufi
Thank, @hockh @fuxmen, @mooncrown_ksk
File: SRK-D80230a_20150403_droidth.zip
MD5 checksum: 0BD1154DC296C73AE1061AED41FE4D53
File: SRK-D80230b_20150425_droidth.zip
MD5 checksum: FA96651705BEC42A23525652EC80DD4A
File: SRK-D80230d_20150403_droidth.zip
MD5 checksum: 95D9E126FA87A1A4F8C2F1CD5A33701E
File: SRK-D80230e_20150417_droidth.zip
MD5 checksum:15243a03c33c57fead73ddce1638b934
File: SRK-D80230f_20150926_droidth.zip
MD5 checksum:db2daa234e6fe50b6cb84f1d1736558d
MOD by @glfsd
http://forum.xda-developers.com/lg-g2/themes-apps/d802-lollipop-theme-original-firmware-t3071485
D802 - Bump Stock LP 30a,30b,30d,30e,30f,30h:
https://www.androidfilehost.com/?w=files&flid=31132
D802 - LP BaseBand 30a,30b,30d,30e,30f,30h:
https://www.androidfilehost.com/?w=files&flid=31134
Change logs:
- Rooted
- Remove all Vodafoneblotware
- Bump kernel 30d/30a
- Fix Battery
- Still have TWRP Recovery Bump 2.8.6.1
- Add SELinux Mode Changer
- Smoothy / Fast / Stable
- Hide Home touch buttons
- Combination key enter to Recovery
- Can flash on Jelly Bean or KitKat ROM
- Lte Support
BACKUP DATA BEFORE INSTALL ROM AND MAKE SURE YOU HAVE THE LASTEST VERSION......
New instructions FOR SRK-D80230F-EUR_20160528_droidth.zip
1. downlaod ROM
2. download 01-CustomPatcherScript_Bump.zip
https://onedrive.live.com/redir?resid=F8CABDE84AF2675E!4276&authkey=!AJCH2nNZUVGRxBI&ithint=file,zip
3. download 02-BETA-SuperSU-v2.67-20160121175247.zip
https://onedrive.live.com/redir?resid=F8CABDE84AF2675E!4275&authkey=!AM1CLoezpWOl9mk&ithint=file,zip
4. reboot to TWRP
5. install ROM (after finished don't reboot system)
6. install 01-CustomPatcherScript_Bump.zip
7. install 02-BETA-SuperSU-v2.67-20160121175247.zip
8. reboot
if you forget install 01-CustomPatcherScript_Bump.zip and 02-BETA-SuperSU-v2.67-20160121175247.zip, then you got bootloop, please go back to TWP and then install both files and reboot again
How to install
1. Copy ROM into SDCARD
2. Reboot to Recovery
3. Wipe (System,cache,dalvik,data)
4. Install ROM
5. Reboot
6. Enjoy
How to Go back to KK (Install ROM or Restore KK image)
- D802_PATCH_RETURN_KK_droidth.zip
http://bit.ly/1LJG52P
1. Reboot to Recovery (Base on TWRP Recovery)
2. Flash D802_PATCH_RETURN_KK_droidth.zip > Home
> Choose Reboot > reboot to Recovery again
3. Depend on situation
3.1 You want to restore KK image
- Restore KK Image (Go to 4.)
3.2 You want to install KK Custom ROM
- Wipe (system\data\dalvik and cache)
- Flash KK Custom ROM
- Flash ASOP KK BaseBand (For ASOP Custom ROM)
4. Reboot
How to Restock LP image (When current ROM is KK)
-D802_PATCH_GO_LP_V1.1_droidth
https://mega.nz/#!YNMmWKoJ!h2siD4om0jKPkrTA4mSpCrdHvMBIY3Bv3aXIQxMDKQo
1. Reboot to Recovery (Base on TWRP Recovery)
2. Flash D802_PATCH_GO_LP_V1.1_droidth.zip > Home
> Choose Reboot > reboot to Recovery again
3. Flash your Custom Recovery that you use backup your ROM before go back to KK
Then choose reboot to recovery again
4. Restore LP image
5. Reboot
How to enter to recovery
1. Turnoff G2
2. Press Power + Vol down button Until LG Logo appear
3. Release 2 button immediately 1-2 sec. then press 2 button again Until appear white screen
4. Choose Yes (Use Vol. Key to choose,Use Power Key to select) 2 times it will be enter to recovery
How to solve problem with Boot stuck on LG Logo
(In case wipe internal storage)
1. Return to Recovery again
2. Choose Wipe > Format > type yes
3. Reboot
FOR Charging bug
Don't worry about this bug.It will be resolve by @dorimanx for comming soon.
It's auto, from 300 to 1500 as kernel decides. Its random..
PLEASE DON'T ASK THIS QUESTION
What's the difference between 30a and 30d?
30a is Italy/international version and 30d is the vodafone version but both are the same except one 30a is just without the Vodafone stuff @Supracer
Thank,
@blastagator Bump TWRP
@topet2k12001 How to add Bump TWRP
For people who can answer the question in my thread please help me answer too,I can't answer or see all question because I have so many question in Thread/inbox xda/Q&A thread/facebook fanpage/inbox facebook fanpage/facebook group and I have so many work in my office.I can't answer for all question.I apologize for it.
Thank you,
ขอบคุณครับ (In Thai language)
[LG2-D802] Step by Step install Official Lollipop firmware via Flash-able Zip
[LG2-D802] Step by Step install Official Lollipop firmware via Flash-able Zip

What about flashing bumped recovery right after flashing this zip to keep the recovery? Is it possible?

Somboons fantastic job! Super Fast! It would be possible to make a flashable zip with the new OPEN V30A of Portugal? Thus avoided blotware Vodafone, we would have a cleaner ROM Thanks

Kael710 said:
What about flashing bumped recovery right after flashing this zip to keep the recovery? Is it possible?
Click to expand...
Click to collapse
Now I have TWRP Recovery.it can use combinationkey. I will be upload tonight.the link can public tomorrow

Can i flash this over cloudyflex 2.7? My phone is 32g d802 with the autorec on it.

flashed this (without flashing TWRP) and got into bootloop had to CSE flash KDZ

Actually im using cyanogenmod 12. Can i flash this ROM with no problems? Thanks
Sent from my SM-N910F using XDA Free mobile app

somboons said:
Now I have TWRP Recovery.it can use combinationkey. I will be upload tonight.the link can public tomorrow
Click to expand...
Click to collapse
We will be waiting. Please use an open rom, not vodafone . Thanks so much.

Rivafe said:
Actually im using cyanogenmod 12. Can i flash this ROM with no problems? Thanks
Sent from my SM-N910F using XDA Free mobile app
Click to expand...
Click to collapse
insalled 10 minutes ago over cm12 (wiped data, formated system & cache), booted up without a problem

Can i flash this ROM with TWRP? Thanks
Sent from my LG-D802 using XDA Free mobile app

Rivafe said:
Can i flash this ROM with TWRP? Thanks
Sent from my LG-D802 using XDA Free mobile app
Click to expand...
Click to collapse
worked for me

Rivafe said:
Can i flash this ROM with TWRP? Thanks
Sent from my LG-D802 using XDA Free mobile app
Click to expand...
Click to collapse
If u can, read first post and answer himself.

legola said:
Can i flash this over cloudyflex 2.7? My phone is 32g d802 with the autorec on it.
Click to expand...
Click to collapse
Yes ,you can .please use TWRP the latest version

TiagoEsteves said:
It would be possible to make a flashable zip with the new OPEN V30A of Portugal? Thus avoided blotware Vodafone, we would have a cleaner ROM Thanks
Click to expand...
Click to collapse
+1 :good:

I ' m working how to install TWRP on lollipop ROM for all varaint.
If I can prove it I will create thread to guide.

So to get this correctly...with latest twrp on D802 you wont lose custom recovery after flashing??

pikachukaki said:
So to get this correctly...with latest twrp on D802 you wont lose custom recovery after flashing??
Click to expand...
Click to collapse
TWRP IS costum recovery. If you don't flash TWRP you'll have STOCK recovery.

klemenSLO said:
TWRP IS costum recovery. If you don't flash TWRP you'll have STOCK recovery.
Click to expand...
Click to collapse
You can't flash this without twrp...im asking if this zip cause the custom recovery to be lost...

pikachukaki said:
You can't flash this without twrp...im asking if this zip cause the custom recovery to be lost...
Click to expand...
Click to collapse
Yep, if you flash this ROM trough custom recovery, you'll we lost your custom recovery, BUT, if you got international version of G2 (D802), you can use this tutorial -> http://forum.xda-developers.com/lg-g2/development/guide-bumpedtwrp-recovery-stock-v30d-t3070365 to get it back (thanks @wolfgart by the way)

vesi said:
+1 :good:
Click to expand...
Click to collapse
I can do it,please check for me it have Thai language.?

Guides Unlock boot-loader, installing Recovery and Custom Rom and MODS

first of all, im not developer im just sharing what i use
hello everyone.
i saw many in here asking about how to root or unlock boot-loader or flashing custom rom
so i will share what i have done (( again im just sharing and im not responsible of any damage ))
***first step is unlocking bootloader***i used this Unlock thanx to http://lenovo-forums.ru/
now lets d the steps of unlocking
UNLOCKING WILL FORMAT EVERYTHING so backup what u need
1. download and extract the app of unlocking will use it in step 5
2. go to Settings - About phone - device information and tap on "Build number" until you become a developer.
3. Go to Settings - Developer options - tap on OEM unlocking - then tan op Android debugging.
4. go to home in mobile and plug USB
5. go to the unlocking app and click on A7010_unlock
6. it will go to fastboot mode READ what asks for and click on volume up when it says so!
7. after it finished keep holding in power til it restart
8. it will take about 3-5 minutes to start
9. congratulations ur K4 is unlocked
NOW LETS GIVE IT TWRP RECOVERY i use @mohancm Recovery its stable and no sdcard or internal sd bugs . but if u want anything else u can use its up to you!
now lets do the right steps for flashing custom Recovery
1. Recovery already in this ZIP file download it and unzip
2. now hold you mobile
3. go to Settings - About phone - device information and tap on "Build number" until you become a developer.
4. Go to Settings - Developer options - active Android debugging.
5. go to home in mobile and plug USB
6. go to the TWRP folder and click on TWRP_Install
7. it will go to fastboot mode and install recovery by it self
8. after it finished DONT REBOOT TO NORMAL MODE
9. keep holding power and volumes up and down till you see Lenovo start up Screen . now keep holding the volumes up and down keys till u get black screen, wait a bit and recovery will open
10. congratulations ur K4 is unlocked and have TWRP recovery .
now lets Root it or install custom Romits up to you what ROM you want to use but i like resurrection-remix-m its bugles and smooth and fast
so if you like it u can download and use the coming steps . P.S steps will work on any custom Rom you choose to install
1. Download Rom and copy it to you external sdcard
2. go to recovery
3. Recommended - Full wipe and factory reset(including internal storage)
4. click on flash and flash the Rom you saved in external card
5. if you used resurrection remix Rom dont forget to flash GAPPS the recommended in the Rom Link
6. flash Supersu
7. reboot device
8. step up the mobile and leave it 5-10 minutes then reboot ,NOW YOU ARE READY TO USE THE ROM
Now lets talk about most used Roms and Mods that working very well in Lenovo a7020 ROMSAs showing up there is RESURRECTION REMIX M [5.7.4][MT6753] very good and stable Rom . will find it HERE
We have Nikkali Rom a very good Rom and stable and it have VOLTE working you will find it HERE
And we have macblaze Rom a very good Rom and stable and it have VOLTE working you will find it HERE
And we have Lenovo A7010 - CM13.0 its stable and smooth you will find it
HERE its Russian use translator
A user have updated the CM13 and made some mods and new things to it u will find it HERE its Russian use translator
will update when we have any full working ROMSMODSnow lets talk about XPOSED
it have many mods and great things but as many users have report if you want to use a stock based ROM ROW-S232 for now if u install XPOSED will get bootlop
SOUND MOD
if you are using CM13 or RR its a great sound mod Divine Beats
THREAD WILL BE UPDATED

Good work ?

mohancm said:
Good work
Click to expand...
Click to collapse
thank you
and if i forget anything plz let me know

Hi, When I click the link to the App for unlocking above "APP" it doesn't go to the unlocking app. It is instead linked to "recovery.img". By the way what is the name of the application? Tnx

atomlife_074 said:
Hi, When I click the link to the App for unlocking above "APP" it doesn't go to the unlocking app. It is instead linked to "recovery.img". By the way what is the name of the application? Tnx
Click to expand...
Click to collapse
download it and check!
it have the UNLOCK and the RECOVERY run file

Thanks for your reply. It was caused by partial download yesterday. I have the complete files now.

atomlife_074 said:
Thanks for your reply. It was caused by partial download yesterday. I have the complete files now.
Click to expand...
Click to collapse
Good

I followed the steps correctly and I am able to boot into recovery but it is chinese.
Pls advise.

rishi2000 said:
I followed the steps correctly and I am able to boot into recovery but it is chinese.
Pls advise.
Click to expand...
Click to collapse
Russian not chinese
Change language to English
Sent from my Lenovo A7010a48 using XDA-Developers Legacy app

crazylife said:
Russian not chinese
Change language to English
Sent from my Lenovo A7010a48 using XDA-Developers Legacy app
Click to expand...
Click to collapse
How?? Can you pls explain step by step . Sorry giving too much trouble.

rishi2000 said:
How?? Can you pls explain step by step . Sorry giving too much trouble.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my K4 NOTE using XDA-Developers Legacy app

rishi2000 said:
How?? Can you pls explain step by step . Sorry giving too much trouble.
Click to expand...
Click to collapse
recovery and details have been updated
re check it up in first post
it will be English by default

crazylife said:
recovery and details have been updated
re check it up in first post
it will be English by default
Click to expand...
Click to collapse
Now after doing all the steps.
First boot i pressed the volume keys (both) and power button and after Lenovo screen released the power button and keep holding the volume keys. till black screen appears.
after that no further display available. touch can be recognised. i mean vibration is coming while pressing on the sscreen and back key etc.
Please advise if I done something wrong.

rishi2000 said:
Now after doing all the steps.
First boot i pressed the volume keys (both) and power button and after Lenovo screen released the power button and keep holding the volume keys. till black screen appears.
after that no further display available. touch can be recognised. i mean vibration is coming while pressing on the sscreen and back key etc.
Please advise if I done something wrong.
Click to expand...
Click to collapse
You need to wait at least a minute after flashing recovery.
Don't touch phone till then.
After a min press power button once. You can unlock the recovery.
After that go to setting in recovery. Change brightness to 10% . small issue. But bothers lot in beginning.

work for lollipop?

arifvox said:
work for lollipop?
Click to expand...
Click to collapse
Work Android M?

alison.rm said:
Work Android M?
Click to expand...
Click to collapse
Only for Android 6 marshmallow

arifvox said:
work for lollipop?
Click to expand...
Click to collapse
Nop only for Marshmallow

Hello...
8 - "DONT REBOOT TO NORMAL MODE"?
I do not understand step 9 ... I did not understand which buttons to press. I may not be able to restart in recovery mode.
Root = flash the zip with TWRP. Right?
Xposed = flash sdk23 / arm64 zip with TWRP. Right?

I couldn't get TWRP work in my phone, not sure what step I misunderstood or missed out. After the unlock process the phone will be reset and I need to set up dev, usb debugging again after normal reboot. After renaming/replacing recovery.img run the install twrp script. The phone will reboot into recovery and it normally says "press any key to continue" until the process is completed, then wait for a few minutes. However when I reboot to recovery mode it's still "Lenovo recovery" not TWRP. I did it about 3x with the same result. Any idea? Thanks in advance.

Develop Bugs

welcome