Hi everyone,
It's been some time since I last came here.
I am facing a problem in my LG G3 and was wondering if anyone here can help me.
My phone is D855 was on V21A, Global ROM, rooted. I was thinking about updating to 6.0, so I used Autorec to flash TWRP to backup everything before the update. After Autorec I used terminal emulator (as I always do) to reboot into recovery. And then, the phone kinda died. The screen is always black, no LED blink nothing.
When I connect the phone to the PC it gets recognized as AndroidNet USB port.
I look through the forums for solution and came across this:
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
I opened up the phone and did the short-wire and my phone got recognized as Qualcom 9008. I used the tool named: BoardDiag and it could copy stuff to my phone.
However, the issue that I faced was that I could not locate the TOT file of V21A. I tried the TOT of V10E and it did not work.
I tried following the method of LGExtract tool to turn the KDZ file to TOT but that did not work either. What happened is that the tool turn the KDZ to CAB and then when I try to extract the CAB it says that it is corrupted. Tried another KDZ from another source and the same result.
What I need now is one of two things:
Either the TOT file of Global V21a
or a working method for KDZ to TOT conversion.
Thanks for any suggestions.
[UPDATE]
I tried renaming the KDZ to TOT but it could not be extracted to the right MBN files.
I am facing the same problem with my LG G3 D850. I flashed a D851 Variant version of the rom and after fixing the hard brick part i am stuck flashing the .tot file because its considering my phone as D851 model. I tried to flash the LGUP_8974.dll to try to fix it and nothing.
Dr.Alani said:
Hi everyone,
It's been some time since I last came here.
I am facing a problem in my LG G3 and was wondering if anyone here can help me.
My phone is D855 was on V21A, Global ROM, rooted. I was thinking about updating to 6.0, so I used Autorec to flash TWRP to backup everything before the update. After Autorec I used terminal emulator (as I always do) to reboot into recovery. And then, the phone kinda died. The screen is always black, no LED blink nothing.
When I connect the phone to the PC it gets recognized as AndroidNet USB port.
I look through the forums for solution and came across this:
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
I opened up the phone and did the short-wire and my phone got recognized as Qualcom 9008. I used the tool named: BoardDiag and it could copy stuff to my phone.
However, the issue that I faced was that I could not locate the TOT file of V21A. I tried the TOT of V10E and it did not work.
I tried following the method of LGExtract tool to turn the KDZ file to TOT but that did not work either. What happened is that the tool turn the KDZ to CAB and then when I try to extract the CAB it says that it is corrupted. Tried another KDZ from another source and the same result.
What I need now is one of two things:
Either the TOT file of Global V21a
or a working method for KDZ to TOT conversion.
Thanks for any suggestions.
[UPDATE]
I tried renaming the KDZ to TOT but it could not be extracted to the right MBN files.
Click to expand...
Click to collapse
Same problem here.
did you find a solution????
Please HELP
.....
I used the same short-wire method and flashed the only TOT I could find, which was 10E. However, this time I flashed the system partition as well. In the guide it says it would take a long time so don't do it. I did it anyway. It took reeeeeeeeeaaaaalllllly long time. Over 4 hours.
After finishing flashing I place back the battery as indicated in the guide and the phone restarted and was stuck at LG screen. I connected it to the computer and it was finally recognized as an LG Android phone.
Then I used the official LG update tool. It detected the phone and said there was an update. I proceeded with the update and everything went back to normal. I even had the same data and apps because I did not overwrite the data partition.
I hope this helps.
Sent from my LG-D855 using XDA-Developers mobile app
Dr.Alani said:
I used the same short-wire method and flashed the only TOT I could find, which was 10E. However, this time I flashed the system partition as well. In the guide it says it would take a long time so don't do it. I did it anyway. It took reeeeeeeeeaaaaalllllly long time. Over 4 hours.
After finishing flashing I place back the battery as indicated in the guide and the phone restarted and was stuck at LG screen. I connected it to the computer and it was finally recognized as an LG Android phone.
Then I used the official LG update tool. It detected the phone and said there was an update. I proceeded with the update and everything went back to normal. I even had the same data and apps because I did not overwrite the data partition.
I hope this helps.
Sent from my LG-D855 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you,
This is very helpful for me and all V21A owners.
Thaaaaaaaaaaanks.
LoRd4LoL said:
Thank you,
This is very helpful for me and all V21A owners.
Thaaaaaaaaaaanks.
Click to expand...
Click to collapse
I also short wired. Now I am looking for a TOT file. I had stock lollipop for lg g3 canadian version (d852) but i cannot find the tot file for lollipop. I have tot files for marshmallow and kitkat. Will that work?
I am downloading a lollipop 20g kdz file. Not sure if it will work. Plz help. Thanks.
Hello Everyone,
i need help reviving my lg g4 and i search all the forms but no avail. I just got a G4 4 days ago only it was running lollipop and working fine i just check for the MM update in phone but there was no update so as i previously own a lg g4 with flumics rom so i decided to flash a kdz with MM update. I see my model no. as h815 so i download H81520h_00_0516.kdz and flashed it through lg flash tool 2014 it flashed without no error but after the flash i got no display in phone just blue led flashes and i hear lg boot sound and then just nothing on phone display it switched off itself. I try to go into hard reset but again no display i try to go into download mode again no display. I attached it to pc it shows LGE Mobile USB Composite Device. Although it shows in lgup tool as H815 and port no. as well.I search my model no. through IMEI i found that it is actually F500L model as i see Korean as it flashed 1st time in download mode. After some research i manage to go into download mode by removing the battery and attaching the phone to pc as it shows empty battery icon so i inserted the battery by pressing the vol up button it goes into download mode. So i try to flash the right firmware which is F500L20u_00_0504.kdz bhut lgup says it invalid kdz i try to flash it through lg flashtool2014 but it says cannot connect to server and failed with contact system administrator. Although it flashes H815_EU_10C_00.kdz and India H818N10d_00.kdz firmware's but those give no display at all i tried it with Lg Bridge as it shows update avalable F500l and it download it but failed to flash it. I try flashing korean tot file LGF500LAT-00-V11d-LGU-KR-SEP-21-2015+0.tot through lgup tool but again it said invalid tot file So friends i am stuck and looking for 5 days to find any solution So anyone can please help me i just used it for 1 day . So can anyone help me.
You have to edit a F500L kdz with a hex editor and replace every F500L to H815 or something that flashes without error
First, if it's H815, you're to flash an H815 kdz with LG up
http://storagecow.eu/index.php?dir=Xda/LG+G4/H815/
Put into download mode and refurbish the kdz accordingly.
I have a problem, after starting the LG screen.
It will probably be a software error because it does not have a bootlop. When Factory reset is turned on, it shows up, but it does not respond before the ending.
Download mode works, but LGUP does not open completely and wants to enter the model but where?
I've already explored everything with LGUP, the latest 8994 dll version, but it does not respond.
I also explored LG Tools, that recognizes my model H815, the update will run but always at 16% end.
Does anyone know what to do?
Well thank you.
Hi,
I tried to upgrade my LG G4 H815P with this thread:
https://forum.xda-developers.com/g4/development/h815-nougat-stock-locked-bootloader-t3709119
The process with LGUP was ok (upgrade mode), but after the first reboot the phone stucks on LG logo, so I tried to use refurbish mode but the process throws a error 0x2000.
I tried a lot of solutions but the problem continues.
Maybe you know a tot file with android 6 to restore my phone with LGUP?
https://forum.xda-developers.com/g4/help/help-lg-g4-h815-lgup-failure-t3640936
https://forum.xda-developers.com/g4/help/lg-g4-stuck-firmware-update-screen-t3675998
https://forum.xda-developers.com/g4...bootloader-t3709119/post74946652#post74946652
Seems like the restore only works with H81520p_00_0314.kdz
Solved!
Hello. Long story short, I have no luck with LGUP or the LG flash tool. The phone is recognized in both tools, but on LGUP(ver 1.14) it shows up as “unknown” and on LG Flash I go as far as 2% of the flashing process and then an error occurs. All of this whilst the phone is in Download mode. Don’t know anything more about the phone, since I just bought it off of a dude. The phone is operable only in download mode, otherwise when I try to boot normally, I get stuck on the LG logo (bootloop idk). I’ve tried different KDZ and TOT roms with different DLLs but no luck. Can somebody guide me? Thanks a lot in advance.