My G3 F400L was already on stock and rooted. However, i read that if you modify the build.prop ro.model to a K variant and flash the K variant firmware you will end up with the an F400K - which would be better for me frequency-wise.
After 3 attempts using the TOT and DLL method, i'd always get a failure aftter 15 secs. For the first 2 times i could reboot normally into the same OS.
But on the 3rd failed attempt, it would go as far as the LG logo then the screen would go black with the pilot light glowing on and off.
Please help! I've been looking for a kdz for the F400L but couldnt find any. i plan to flash using LGFlash Tool 2014.
Appreciate any immediate advise. Thanks!
Hello everyone. My LG G3 Cat. 6 (F460K) was boot looped. It was caused by an OTA update initiated by someone who was using my phone. Now, it's not usable. Only shows the LG logo but reboots and does that cycle while it's on. It has download mode, and I have tried flashing through LG Flash Tool 2014 with a KDZ (F460K30c) and it successfully finished. However, it's still having the same problem. I tried flashing with TOT, but I somehow get this error: i.imgur.com/aB13Jig.png (XDA won't allow me to put links)
I need your expert opinions on this case. I really need your assistance. Thank you in advance!
Hi everyone,
It's been some time since I last came here.
I am facing a problem in my LG G3 and was wondering if anyone here can help me.
My phone is D855 was on V21A, Global ROM, rooted. I was thinking about updating to 6.0, so I used Autorec to flash TWRP to backup everything before the update. After Autorec I used terminal emulator (as I always do) to reboot into recovery. And then, the phone kinda died. The screen is always black, no LED blink nothing.
When I connect the phone to the PC it gets recognized as AndroidNet USB port.
I look through the forums for solution and came across this:
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
I opened up the phone and did the short-wire and my phone got recognized as Qualcom 9008. I used the tool named: BoardDiag and it could copy stuff to my phone.
However, the issue that I faced was that I could not locate the TOT file of V21A. I tried the TOT of V10E and it did not work.
I tried following the method of LGExtract tool to turn the KDZ file to TOT but that did not work either. What happened is that the tool turn the KDZ to CAB and then when I try to extract the CAB it says that it is corrupted. Tried another KDZ from another source and the same result.
What I need now is one of two things:
Either the TOT file of Global V21a
or a working method for KDZ to TOT conversion.
Thanks for any suggestions.
[UPDATE]
I tried renaming the KDZ to TOT but it could not be extracted to the right MBN files.
I am facing the same problem with my LG G3 D850. I flashed a D851 Variant version of the rom and after fixing the hard brick part i am stuck flashing the .tot file because its considering my phone as D851 model. I tried to flash the LGUP_8974.dll to try to fix it and nothing.
Dr.Alani said:
Hi everyone,
It's been some time since I last came here.
I am facing a problem in my LG G3 and was wondering if anyone here can help me.
My phone is D855 was on V21A, Global ROM, rooted. I was thinking about updating to 6.0, so I used Autorec to flash TWRP to backup everything before the update. After Autorec I used terminal emulator (as I always do) to reboot into recovery. And then, the phone kinda died. The screen is always black, no LED blink nothing.
When I connect the phone to the PC it gets recognized as AndroidNet USB port.
I look through the forums for solution and came across this:
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
I opened up the phone and did the short-wire and my phone got recognized as Qualcom 9008. I used the tool named: BoardDiag and it could copy stuff to my phone.
However, the issue that I faced was that I could not locate the TOT file of V21A. I tried the TOT of V10E and it did not work.
I tried following the method of LGExtract tool to turn the KDZ file to TOT but that did not work either. What happened is that the tool turn the KDZ to CAB and then when I try to extract the CAB it says that it is corrupted. Tried another KDZ from another source and the same result.
What I need now is one of two things:
Either the TOT file of Global V21a
or a working method for KDZ to TOT conversion.
Thanks for any suggestions.
[UPDATE]
I tried renaming the KDZ to TOT but it could not be extracted to the right MBN files.
Click to expand...
Click to collapse
Same problem here.
did you find a solution????
Please HELP
.....
I used the same short-wire method and flashed the only TOT I could find, which was 10E. However, this time I flashed the system partition as well. In the guide it says it would take a long time so don't do it. I did it anyway. It took reeeeeeeeeaaaaalllllly long time. Over 4 hours.
After finishing flashing I place back the battery as indicated in the guide and the phone restarted and was stuck at LG screen. I connected it to the computer and it was finally recognized as an LG Android phone.
Then I used the official LG update tool. It detected the phone and said there was an update. I proceeded with the update and everything went back to normal. I even had the same data and apps because I did not overwrite the data partition.
I hope this helps.
Sent from my LG-D855 using XDA-Developers mobile app
Dr.Alani said:
I used the same short-wire method and flashed the only TOT I could find, which was 10E. However, this time I flashed the system partition as well. In the guide it says it would take a long time so don't do it. I did it anyway. It took reeeeeeeeeaaaaalllllly long time. Over 4 hours.
After finishing flashing I place back the battery as indicated in the guide and the phone restarted and was stuck at LG screen. I connected it to the computer and it was finally recognized as an LG Android phone.
Then I used the official LG update tool. It detected the phone and said there was an update. I proceeded with the update and everything went back to normal. I even had the same data and apps because I did not overwrite the data partition.
I hope this helps.
Sent from my LG-D855 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you,
This is very helpful for me and all V21A owners.
Thaaaaaaaaaaanks.
LoRd4LoL said:
Thank you,
This is very helpful for me and all V21A owners.
Thaaaaaaaaaaanks.
Click to expand...
Click to collapse
I also short wired. Now I am looking for a TOT file. I had stock lollipop for lg g3 canadian version (d852) but i cannot find the tot file for lollipop. I have tot files for marshmallow and kitkat. Will that work?
I am downloading a lollipop 20g kdz file. Not sure if it will work. Plz help. Thanks.
Dear friends,
I am in deep trouble. Few days ago I have flashed CM rom on my LG G3 F400L. Now the problem is after waking up today I find my set totally dead. I can't enter into recovery mode with holding buttons. The phone stucked into LG logo. Tried many times to flash with LG flash tool. But it says download fail, device model is different.Check ur phone or dll. Tried generic dll but not working. Any help will be much appreciated. Thanks
Hello, so basically today out of nowhere, i found my lg g3 bootlooping (Lg logo+led blinking) and nothing else, tried hard reset, but got a android on the ground with red triangle, then got to download mode and tried everything that i could find to get it working, but nothing worked.. LG flash tool with dll and tot, other tool with .kdz, but everything fails... i think it might be that im trying not the stock firmware.. I tried all europeans, international versions, with no luck. got the .kdz method getting up to 99% and then the flash tool crashed, and on the phone same bootloop. found my stock firmware by IMEI, but can't download it:
6PL/PLUS_16G(POLAN V30b LGD855
The link for me isn't working:
csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW299GH752SMAA174B8C7JP/D85530b_00_0927.kdz
I'm literally out of ideas.
i have no warrienty. :/