I know i should put more info here but im out of town for work so hopefully someone can help. My 10 rebooted today and gave this error message: Reboot Reason: 0x776655aa, Reboot message: RPM:APPS NS-WD! ... Any ideas? No, i don't have a log, yet. I'll get one this weekend when I'm home. Thanks.
Related
Dear Fellow Forum Members,
Followed instructions as per Xda_II_Upgrade.pdf, during installation got to a section where I got a message saying that the current rom is being erased a task bar was displayed which increase's in percentage as the job goes through. However the job was still at 0% completion when an error message was displayed saying the job had failed and the device needed to be undocked and a soft reset performed and then re-docked and to restart the process again. After performing the undocking of the device and software reset I get a message on the screen serial V1.0.1 when connected to the cradle the message changes to USB 1.01 and I cannot do anything else the unit does not boot into pocketpc, as you can imagine this is very frustrating as I depend on my xda2 to receive and make phone calls I would be very grateful any members know of any way to get around this problem. I must say I am a bit concerned a try and tested xda2 update has led to this problem.
Just run the update .exe file again with the XDA docked and it should just install the update again. It happened to my mate on Saturday with his XDA II and he just ran the program again.
Dave,
done as you said and all went thru fine you are a star thanks mate.
No problems it's good as a newbie to be able to actually help people.
upgrade xda2 rom ver 172187 dead os--connection error
i was trying to upgrde the rom from o2 website when error occured at stage 19% completed asking me to reset the xda2 . when i am trying to reset the xda 2 it does not boot it just shows the o2 screen with red letters of the version and does not even charge. my laptop cannot connect to xda2 and as a result i am unable to upgrade when i tried to run the 172187 .exe again it gives error 101: connection error
please help me out of this? thanks
i recently tried to update my universal, with the crossbow rom, after pluging the device in my desktop, it started with the update, and placing a message, connection erorr , resulting in ,that my device is stuck in the boot mode, and will not react anymore.
i have tried to update ,without result , i keep getting the message 150 connection error
id there anybody out therer who has had the same problem, if so did you fix , and how did you fix it?
regards peter
I will tell you what I did it my be wrong but I unpluged the usb from the uni and pushed the front light button,power button and the reset at the same time and pluged it in again you get the popup found new device ppc. Then reran the rom update.
NO, just take the SD Card out of the slot and proceed with the update. You must be using a 4GB SD Card, aren't you?
rom upgrade ,universal dead
i keep getting the following message, even if i take the 4gb sd card out of device:
error 150 rom upgrade utility error.
please help it is driving me crazy.
regards peter
pcsw said:
i keep getting the following message, even if i take the 4gb sd card out of device:
error 150 rom upgrade utility error.
please help it is driving me crazy.
regards peter
Click to expand...
Click to collapse
Hi, are you able to get in to the bootloader mode?
Try reading:
http://wiki.xda-developers.com/inde...tion On How To Upgrade with Bootloader method
http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen
http://wiki.xda-developers.com/inde...ose stuck on Boot Screen (UNI_exitbootloader)
Hope it helps.
Every time I try to run USL or update the ROM I get this error message after about 3-5%: The image file is corrupt. Can you help?
bring your device into bootloader mode , connect via as and try again!
ghiatti1 said:
Every time I try to run USL or update the ROM I get this error message after about 3-5%: The image file is corrupt. Can you help?
Click to expand...
Click to collapse
I sometimes get this if my firewall and antivirus is enabled
Antivirus and Firewall are disabled.
I tried to enter the bootloader mode by pressing the record key and reset, but the PDA just resets.
this is how you enter bootloader:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
Just wanted to let you know that I have managed to update the ROM. I cannot tell why but it worked the 10th time! Sorry I cannot give any siggestions to anyone with the same problem.
I got this error when trying to install newest Codon Rom on my device without cid-unlocking the device before. After I cid-unlocked the rom I did not get the "image corrupt" warning.
I did not try to reproduce it after I installing the rom, maybe you could give this a try.
regards,
Daniel
keeps popping up every time the option that the phone display under the message is reset phone after i press reset phone it reboots into recovery i tried factory restore it loads all the way thre then i reboot phone and it takes me right back to the same message (ecryption unsuccesful) i tried wipe cache ,going to zte website and downloaded the sd card upgrade for my device which gives me error status 7 every time i try to update from sd card and when i try other upgrades i find over the internet some say get prop error , e signature error i dont have debug enabled ,rsa key or clockwork recovery i no it has to be a way to fix this ....adb says device unauthorized so i cant fastboot please someone help me
so recently all of a sudden my phone just starts bootlooping....it gave me an EXT4 File error and i flashed a stock image and got rid of the error but still randomly reboots...now i tried to flash a image and i get an error saying i dont have enough space but i have the 128GB and i only used about 12% of storage so there is way more than enough space...can somebody help me please? i attached a pic of the error im getting