Related
i didnt see anyone having this problem but got my gn and unlocked it yest, i came fr evo3d and we used to wiping everything n cache n dalvik so i tried to flash my first rom and im getting error " error in /sdcard/toro_aokp_b8.zip(status7) installation aborted assert failed:getprop(ro.product.device==toroII
i thought it was that rom but i tried flashing another rom and getting same message , if someone can help i appreciate it, i came fr the evo3d left sprint after 11yrs and woow what a difference in network, awesome network but im spoiled with rooting my ogevo n evo3d lol i love this phone hope i can fix this issue
Could you let us know what roms you've tried and the exact process you used please. Also are you using CWM?
RTContent said:
Could you let us know what roms you've tried and the exact process you used please. Also are you using CWM?
Click to expand...
Click to collapse
k first rom i tried AOSP 4.0.3ANDROID OPEN KANG PROJECT-TORO BUILD8 so i wiped data factory reset and cache n dalvik and flashed the rom, it looks like it starts to flash but aborts with the message above, then i restored my nan backup rebooted and went back to cwm to reflash the second time around i only wipe data factory reset cuz thats what the op says to do on his thread so i only wipe data factory n flash the rom still same error, so i went to try another rom GUMMYNEX 0.2.3 and i did the same process with both im following the steps their stating in the op in have cwm
From what the error sounds like is that it doesn't think you have the correct device. You have a CDMA phone and not a GSM?
RTContent said:
From what the error sounds like is that it doesn't think you have the correct device. You have a CDMA phone and not a GSM?
Click to expand...
Click to collapse
ui
yup, i got it fr verizon cdma, im starting to stress man, ive been so used the rooting world n having custom roms i dont know how i could do without it lol, i hope i can get this issue resolve
Flip35 said:
ui
yup, i got it fr verizon cdma, im starting to stress man, ive been so used the rooting world n having custom roms i dont know how i could do without it lol, i hope i can get this issue resolve
Click to expand...
Click to collapse
sure you are using the lastest CWM???
sure you are rooted??
did you try downloading the files from another puter??
i think i might know what the problem is my cwm says 5.5.0.2 and im looking here at somebody posted in the development section for a cdma cwm and it says 5.5.0.4 could that be the problem? if so how do i redo my recovery, follow the same steps i did my first one, i downloaded and extracted the files to my c drive and opened cmd and typed the commands, can i do that again while having already cwm to flash the new cwm on top of the old one? if thats the problem
Download rom manager. Then you can flash it while your booted in android.
RTContent said:
Download rom manager. Then you can flash it while your booted in android.
Click to expand...
Click to collapse
how ive never flashed cwm using rom manager, u meand download the file of cwm5.5.0.4 putting in the root like i do any rom and go into rom manager and install?
No just download the app Rom Manager. It will download the latest version and flash it with a single click within this app!
RTContent said:
Download rom manager. Then you can flash it while your booted in android.
Click to expand...
Click to collapse
wooooord, aight RTcontent good looking out, i guess when u said it looks like it sound it was reading my phone wrong was right, i had a gms cwm, thanx man used rom manager and since i put the new cwm in my root of sdcard when i press install cwm it automatically update it without even booting into recovery but just finished intalling a rom and IT WORKED!!!! UR DA MAN im excited thanx
I don't know if someone already posted this, but searched and couldn't find the answer. I get stuck at boot screen all on AOSP 4.2.2 roms that I tried, but with any TW roms are fine (no problem at all). Can anyone help? I want to run AOSP rom. Thanks.
I think you may be using a touch wiz kernel
You can find some aosp kernels in the original development thread
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
jinxzn said:
I don't know if someone already posted this, but searched and couldn't find the answer. I get stuck at boot screen all on AOSP 4.2.2 roms that I tried, but with any TW roms are fine (no problem at all). Can anyone help? I want to run AOSP rom. Thanks.
Click to expand...
Click to collapse
which rom did you flash, and what did you flash?
the rom only?
the rom and GAAPS?
The rom and kernel?
you need to provide more details if you want to be helped..
Zachinater said:
I think you may be using a touch wiz kernel
You can find some aosp kernels in the original development thread
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I did flashed SOAPKernel along with aosp roms.
wase4711 said:
which rom did you flash, and what did you flash?
the rom only?
the rom and GAAPS?
The rom and kernel?
you need to provide more details if you want to be helped..
Click to expand...
Click to collapse
I flashed BeanStalk, SlimBean, CyanogenMod 10.1 official nightlies, FSC rom, and IllusionRom.
I have CWM Philz_Touch 5.07.1. Every time install a new rom, I wiped Caches + Data / Factory Reset 2x.
I flashed rom only, then flashed rom and GAPPS, those 2 didn't work, I even tried rom w/ SOAPKernel and still didn't work.
ok, you should try switching to TWRP, since most of the time people have zero issues flashing AOSP roms with TWRP.
Also, after all your wipes, flash the rom and GAAPS in the same session, and reboot..
I've done this exact procedure for years, and it works for me 99.98% of the time..
wase4711 said:
ok, you should try switching to TWRP, since most of the time people have zero issues flashing AOSP roms with TWRP.
Also, after all your wipes, flash the rom and GAAPS in the same session, and reboot..
I've done this exact procedure for years, and it works for me 99.98% of the time..
Click to expand...
Click to collapse
Switched to TWRP, and did all the wipes, install rom and GAAPS. Same thing.
Planning to flash stock rom, and redo all the root/recovery procedures all over again. Do you think I should do that?
it couldnt hurt...
some phones are just tempremental; do you have an SD card in your phone?
are you installing from the sd card or internal memory?
try installing from one or the other to see if that helps; sometimes it does...
wase4711 said:
it couldnt hurt...
some phones are just tempremental; do you have an SD card in your phone?
are you installing from the sd card or internal memory?
try installing from one or the other to see if that helps; sometimes it does...
Click to expand...
Click to collapse
I did try both, none work for me.
Thank you so much for your help thou. I'll now just install stock rom and re-root it, see how it goes.
jinxzn said:
I did try both, none work for me.
Thank you so much for your help thou. I'll now just install stock rom and re-root it, see how it goes.
Click to expand...
Click to collapse
good luck, and post back if you get it working properly
flashed stock rom and rooted and installed boot recovery, after all that, it's still not let me install any AOSP roms. Really don't why I can only flash TW roms but not AOSP roms.
Hello!
I recently got a Note 2 (GT-N7105)
And for some silly reason wich even disappoints myself i wanted to overclock , well that didn't make sense i know but however i did it! and directly after i installed the required file (I don't remember wich one but it was for 1.8Ghz) after the installing my phone kept showing the boot logo , i tried to use my backup but even after restoring it didnt boot! I cleaned everything wich also cleaned my backup...
I been on it for about 7 hours now trying different roms , kernels , and every file i could find but nothing helps.
I now installed Cyanogenmod using CMW but even that bootloops.
The last thing i could notice is CMW showing me a E: failed to Mount /efs (Invalid argument) Wich makes me worry even more...
I honestly hope there are some good peaple who could help me with this... Finally got a great phone and by stupid mistakes i made it won't work anymore..
I don't care what rom gets on it , Even if its a hello kitty rom u won't hear me complain , If the phone works again i'll be happy!
Not sure if this helps but its a GT-N7105 , i know it had the newest android there was (4. something, i think it was 4.3)
Odin does see the device , My CMW (6.0.4.1) works and Download Mode works.
I hope anybody can help me!
In case you want to help me live wich would be awesome my skype is : chrishendriks92
If it gets fixed i will Offcourse place the solution here.
(The note is not a new one , its used and a few months old , worked 100% before my stupid decisions bricked it)
(so here's a small version)
-Every rom i tried will bootloop , It shows a different boot video/logo everytime tho
-It all happened after i tried a 2.8Ghz Overclock
-i get a EFS error in CMW
-Accidentily i deleted my backup but i don't mind whatever rom gets on it
-Download mode and CMW (6.0.4.1) works
dodemans said:
Hello!
I recently got a Note 2 (GT-N7105)
And for some silly reason wich even disappoints myself i wanted to overclock , well that didn't make sense i know but however i did it! and directly after i installed the required file (I don't remember wich one but it was for 1.8Ghz) after the installing my phone kept showing the boot logo , i tried to use my backup but even after restoring it didnt boot! I cleaned everything wich also cleaned my backup...
I been on it for about 7 hours now trying different roms , kernels , and every file i could find but nothing helps.
I now installed Cyanogenmod using CMW but even that bootloops.
The last thing i could notice is CMW showing me a E: failed to Mount /efs (Invalid argument) Wich makes me worry even more...
I honestly hope there are some good peaple who could help me with this... Finally got a great phone and by stupid mistakes i made it won't work anymore..
I don't care what rom gets on it , Even if its a hello kitty rom u won't hear me complain , If the phone works again i'll be happy!
Not sure if this helps but its a GT-N7105 , i know it had the newest android there was (4. something, i think it was 4.3)
Odin does see the device , My CMW (6.0.4.1) works and Download Mode works.
I hope anybody can help me!
In case you want to help me live wich would be awesome my skype is : chrishendriks92
If it gets fixed i will Offcourse place the solution here.
(The note is not a new one , its used and a few months old , worked 100% before my stupid decisions bricked it)
(so here's a small version)
-Every rom i tried will bootloop , It shows a different boot video/logo everytime tho
-It all happened after i tried a 2.8Ghz Overclock
-i get a EFS error in CMW
-Accidentily i deleted my backup but i don't mind whatever rom gets on it
-Download mode and CMW (6.0.4.1) works
Click to expand...
Click to collapse
Ok, so what I would do.
I would wipe data through CWM.
Download official ROM from sammobile.com and flash it through Odin.
I hope this will help to get the phone booted.
After that we will worry about imei recovery.
dzejju said:
Ok, so what I would do.
I would wipe data through CWM.
Download official ROM from ... and flash it through Odin.
I hope this will help to get the phone booted.
After that we will worry about imei recovery.
Click to expand...
Click to collapse
Thank you for your reply:good:
I'm downloading it , looks like its going to take a while so i'll let you know!
Try mskips toolkit from skipsoft.net. It has a recovery package that should do the trick. There is a thread on it on here but i think it's closed due to Microsoft signature issues
Sent from my GT-N7105 using XDA Premium 4 mobile app
I'm afraid downloading/Flashing the rom didnt work.
ill get the T-Mobile screen , and then the samsung logo where it gets stuck , the install was completed tho so no errors whatsoever
This is a picture link s30.postimg.org/8l0bgrxa8/image.jpg
Would be amazing if you could help me out with this because i can't choose ''Option 2'' right picture , it just won't take it.
I can install teamviewer or whatever programm you want
I have the same problem, I'm on 4.3 version and tried to downgrade to 4.1.1 and went back to 4.3, I formatted the system through twrp with NO OS INSTALLED to be sure it is totally cleaned but all the way, I still experiencing reboot issue.
At first I encountered unfortunately systemui has stopped, done rooting and fixing permission but still no luck.
One more thing, I already flashed pit file.
.
(Update , I tried anything i could but it didnt work out , its going to Samsung Support)
cz4r3n said:
I have the same problem, I'm on 4.3 version and tried to downgrade to 4.1.1 and went back to 4.3, I formatted the system through twrp with NO OS INSTALLED to be sure it is totally cleaned but all the way, I still experiencing reboot issue.
At first I encountered unfortunately systemui has stopped, done rooting and fixing permission but still no luck.
One more thing, I already flashed pit file.
Click to expand...
Click to collapse
Flash right bootloader, then install fresh rom. Should be good to go.
Mufrad said:
Flash right bootloader, then install fresh rom. Should be good to go.
Click to expand...
Click to collapse
the problem persist.I flashed different bootloader already
cz4r3n said:
the problem persist.I flashed different bootloader already
Click to expand...
Click to collapse
You installed a kernel right? To over clock? First flash new bootloader, then flash stock kernel, then again flash stock rom, do not let the device boot up before you have done all three.
--------------------------------------------
_________________________
Mufrad said:
You installed a kernel right? To over clock? First flash new bootloader, then flash stock kernel, then again flash stock rom, do not let the device boot up before you have done all three.
Click to expand...
Click to collapse
I tried Agni pure kernel and followed your instructions but no avail,I think there is problem with the board,because when I wipe, the SuperSu also erased.
cz4r3n said:
I tried Agni pure kernel and followed your instructions but no avail,I think there is problem with the board,because when I wipe, the SuperSu also erased.
Click to expand...
Click to collapse
I said to install stock kernel not custom kernel, and after wipe when you install stock rom you will loose root and also loose all data and apps from previous rom anyway.
Mufrad said:
I said to install stock kernel not custom kernel, and after wipe when you install stock rom you will loose root and also loose all data and apps from previous rom anyway.
Click to expand...
Click to collapse
yup I already did that,I flashed stock kernel from http://opensource.samsung.com/.I know reflashing stock rom will delete everything including root.
What I mean is when Im rooted and tried to wipe the phone, SuperSu also deleted.Im wondering that I have a corrupted emmc, It seems that it is not mounted correctly, although I tried to flash a pit file already.
cz4r3n said:
yup I already did that,I flashed stock kernel from http://opensource.samsung.com/.I know reflashing stock rom will delete everything including root.
What I mean is when Im rooted and tried to wipe the phone, SuperSu also deleted.Im wondering that I have a corrupted emmc, It seems that it is not mounted correctly, although I tried to flash a pit file already.
Click to expand...
Click to collapse
What method did you use to root and inject supersu?
Mufrad said:
What method did you use to root and inject supersu?
Click to expand...
Click to collapse
The so called SAFEROOT
And I even tried the CF ROOT by Chainfire
butmena said:
--------------------------------------------
_________________________
Click to expand...
Click to collapse
? What!
Sent from my GT-N7100 using XDA Premium 4 mobile app
-Hello, I'm new here. This is my first topic so if i did open this at wrong place, forgive me.-
I do flash roms through CWM a lot and i do keep the roms I downloaded as backups in case something happens. Recently I installed Sir Arco's CM12 (5.0.5) rom and I used it for a week. Then when I tried to change my rom to another one, I got stuck at recovery, after wiping cache/data/dalvik cache, saying "installing update..." but not doing anything for nearly 2 hours. FYI, the roms that I'm trying to install are all working (I used them before and they are the same files that I used to install), I even tried the stock rom but that didn't work either. Please help me ;-;
Note: I forgot the most important part! The phone can boot into recovery but there is no firmware installed in it right now since I couldn't install it. You can say it's pretty empty ;-;
If there's some missing info at this post, please ask it, I'm willing give any support I can.
What version did you tried to install? Only the last version of cm11 and cm12 are compatible with the recovery you used to flash cm12. If you want a older version of cm11 or cm10 and so on you need an older recovery. Probably that's your problem
First, I'm sorry for this slow response! Downloading CM11, finding a SD Adapter and etc. took a little bit long. But yeah, it's just as you said. I was trying to flash a 4.0.4 ICS. Flashing CM11 solved all my problems! Thank you so much! :good:
Erinn said:
First, I'm sorry for this slow response! Downloading CM11, finding a SD Adapter and etc. took a little bit long. But yeah, it's just as you said. I was trying to flash a 4.0.4 ICS. Flashing CM11 solved all my problems! Thank you so much! :good:
Click to expand...
Click to collapse
I'm glad I could help . Either way you can flash ICS if you want. You just have to install a older recovery to do it. And also make sure you have the right one
Alright will do! Thanks
I have been working on the sister models also. I saw no one was building these anymore so here it is I hope it can be enjoyed by all. Spread the word. provide feedback so other fans of this ROM may obtain it and work out any bugs if there are any. I will update once or twice a week depending on time and demand. I'm compiling for three different variants. Hit the thanks button and Enjoy. Dirty flash the updates not the initial flash of this rom but the updates to it. Initial install = Factory reset, wipe data and cache, install rom zip, install gapps zip, install su zip, reboot system. As of 9-3-18 i will be switching to Ubuntu 18.04 Bionic Beaver, that being said i do not know if i will have to change anything or do anything different to keep pushing these updates out but i will most definitely try to keep them coming.
4-10-18
https://www.androidfilehost.com/?fid=890129502657597436
4-13-18
https://www.androidfilehost.com/?fid=818070582850507491
4-17-18
https://www.androidfilehost.com/?fid=818070582850508419
4-24-18
https://www.androidfilehost.com/?fid=673956719939836620 If it's an update then dirty flash it if you already had SuperSU installed you will need to reflash the SuperSU zip if you are installing for the first time you just need to install the SuperSU app
5-4-18
https://www.androidfilehost.com/?fid=818222786056028546
Root is not baked in. Flash and root your preferable way.
5-20-18
https://www.androidfilehost.com/?fid=674106145207488021
5-31-18
https://www.androidfilehost.com/?fid=674106145207490572
7-28-18
https://www.androidfilehost.com/?fid=5862345805528060741
9-3-18
https://www.androidfilehost.com/?fid=1322778262903996744
10-07-18
https://www.androidfilehost.com/?fid=1322778262904022369
12-7-18
https://www.androidfilehost.com/?fid=11410963190603868411
12-16-18
https://www.androidfilehost.com/?fid=11410963190603876081
2-25-19
https://www.androidfilehost.com/?fid=1395089523397901582
3-24-19
https://www.androidfilehost.com/?fid=1395089523397924752
5-6-19
http://download1589.mediafire.com/7...q5/lineage-14.1-20190507-UNOFFICIAL-d2tmo.zip
10-13-19
https://www.androidfilehost.com/?fid=1899786940962607809
i recommend clean flash as i built with different computer
setprop persist.lineage.nofool true in terminal emulator with root privs (type su first grant permission then setprop persist.lineage.nofool true) gets rid of persistant notification
Bluetooth dialtone when playing music fix
Settings > Battery > tap in 3-dot menu at top right tap on Battery optimisation. To show all apps and services here, select the ‘All apps’ options under the dropdown. Tap on both of the Bluetooth services and change them to Don't optimise.
thanks bro... but is it rooted rom or use any method to root it ?
hasan.sy said:
thanks bro... but is it rooted rom or use any method to root it ?
Click to expand...
Click to collapse
I use SuperSU zip
the rom is smooth and stable and i havent faced any probleme ..thank you for you effort and hope you can make oreo rom when the developers fix the problems on it
hasan.sy said:
the rom is smooth and stable and i havent faced any probleme ..thank you for you effort and hope you can make oreo rom when the developers fix the problems on it
Click to expand...
Click to collapse
I appreciate the feedback and no worries mate I'm still trying to get the no sim bug worked out in the att variant no luck so far sprint variant is doing good also
Update posted 4-17-18
It won't boot up for me. I installed the ROM after wiping my entire system through TWRP, flashed Gapps, and installed SuperSU provided by TWRP. When it boots up it says system isn't responding.
Sammay_Boiii said:
It won't boot up for me. I installed the ROM after wiping my entire system through TWRP, flashed Gapps, and installed SuperSU provided by TWRP. When it boots up it says system isn't responding.
Click to expand...
Click to collapse
Wipe system, cache, and dalvik install rom zip install nougat Gapps and SuperSU all at the same time meaning do not reboot until you have flashed all three if it didn't work the first time try it again just make sure you wipe system, cache and dalvik and install the Gapps at the same time it sounds like it's booting up but conflicting with other elements otherwise it would be bootloop and not system isn't responding
Joker1716 said:
Wipe system, cache, and dalvik install rom zip install nougat Gapps and SuperSU all at the same time meaning do not reboot until you have flashed all three if it didn't work the first time try it again just make sure you wipe system, cache and dalvik and install the Gapps at the same time it sounds like it's booting up but conflicting with other elements otherwise it would be bootloop and not system isn't responding
Click to expand...
Click to collapse
Thank you for your rapid response! I will try that as soon as I get to my house and I'll let you know what happens
After doing what you said, it still says "process system isn't responding" I will try a few more times. Also, I'm flashing off nothing. There is no OS, no personal data, just TWRP. Does this have to be flashed on CM12 or something?
Sammay_Boiii said:
After doing what you said, it still says "process system isn't responding" I will try a few more times. Also, I'm flashing off nothing. There is no OS, no personal data, just TWRP. Does this have to be flashed on CM12 or something?
Click to expand...
Click to collapse
You need to Odin flash the latest stock firmware then root then flash recovery then flash the rom
This should help
https://forum.xda-developers.com/showthread.php?t=1949687
Joker1716 said:
You need to Odin flash the latest stock firmware then root then flash recovery then flash the rom
Click to expand...
Click to collapse
I will do that. Your rom needs to be flashed over stock rom?
Sammay_Boiii said:
I will do that. Your rom needs to be flashed over stock rom?
Click to expand...
Click to collapse
No this is lineage os 14.1 it's not mine I just build it because they have stopped doing it officially for this variant of the s3 but there's more to a phone than just the system and you have nothing but a recovery? There's bootloader modem, Efs etc. You wouldn't be able to even flash CM12. in TWRP are you going into advanced wipe or are you just swiping the slider?
Joker1716 said:
No this is lineage os 14.1 it's not mine I just build it because they have stopped doing it officially for this variant of the s3 but there's more to a phone than just the system and you have nothing but a recovery? There's bootloader modem, Efs etc. You wouldn't be able to even flash CM12. in TWRP are you going into advanced wipe or are you just swiping the slider?
Click to expand...
Click to collapse
What you said makes a lot of sense actually. Im used to just flashing back ups of other roms that I forgot how to flash fresh ones. I'm not used to this haha but I got it now. Stock rom 4.3 has been flashed via odin and the root method is currently on my screen.
hasan.sy said:
the rom is smooth and stable and i havent faced any probleme ..thank you for you effort and hope you can make oreo rom when the developers fix the problems on it
Click to expand...
Click to collapse
What was your system status before flashing the rom? What software? I'm having trouble flashing it on my S3
Sammay_Boiii said:
What was your system status before flashing the rom? What software? I'm having trouble flashing it on my S3
Click to expand...
Click to collapse
t999uvuenc2 firmware and bootloader 4.3 using twrp recovery 3.2.1-0..... you must update to latest official firmware t999uvuenc2 to flash any rom 5.1.1 lollipop and higher
hasan.sy said:
t999uvuenc2 firmware and bootloader 4.3 using twrp recovery 3.2.1-0..... you must update to latest official firmware t999uvuenc2 to flash any rom 5.1.1 lollipop and higher
Click to expand...
Click to collapse
Thank you. Ive been flashing this rom repeatedly and always received a "Process system not responding" then it falls into a boot loop
Update posted
Joker1716 said:
Update posted
Click to expand...
Click to collapse
Does it need wipe data and cash before flash or we can do dirty flash without any thing?(update from 13-4-2018 to this rooted update)
hasan.sy said:
Does it need wipe data and cash before flash or we can do dirty flash without any thing?(update from 13-4-2018 to this rooted update)
Click to expand...
Click to collapse
If it's an update then dirty flash it if you already had SuperSU installed you will need to reflash the SuperSU zip if you are installing for the first time you just need to install the SuperSU app