Related
I've been running ARHD 5.1.7 and its been stable OK.
Been trying to upgrade to 5.2.2 but for some reason it either gets stuck at the boot screen or else manages to get pass then but then will hang the moment I try to do anything.
Followed instructions to use Super Wipe per the ARHD pg. And also tried to factory reset first before installing. Same result.
Can anyone help me please? Seems to work for everyone else.
Thank you.
happyshirt said:
I've been running ARHD 5.1.7 and its been stable OK.
Been trying to upgrade to 5.2.2 but for some reason it either gets stuck at the boot screen or else manages to get pass then but then will hang the moment I try to do anything.
Followed instructions to use Super Wipe per the ARHD pg. And also tried to factory reset first before installing. Same result.
Can anyone help me please? Seems to work for everyone else.
Thank you.
Click to expand...
Click to collapse
Did u check the md5 sum and make sure ur download is good first? I assume that u r rooted correctly right? Make sure u r not trying to flash it through cwm. And make sure ur battery isn't low or keep it plugged in on charge only
U r not rebooting after super wipe r u? As soon as wipe is done it tells u to install Rom
Md5 checked when downloading the file. Matched.
Should be rooted correctly since i've been been upgrading the ARHD a few version till i got to 5.1.7.
I used recovery and selected installed the zip from SD card --that is correct? not flashing it thru cwm like u said i should not be doing right?
I have tried with reboot and not rebooting after super wipe. Same result.
Any other possiblity?
Thanks.
happyshirt said:
Md5 checked when downloading the file. Matched.
Should be rooted correctly since i've been been upgrading the ARHD a few version till i got to 5.1.7.
I used recovery and selected installed the zip from SD card --that is correct? not flashing it thru cwm like u said i should not be doing right?
I have tried with reboot and not rebooting after super wipe. Same result.
Any other possiblity?
Thanks.
Click to expand...
Click to collapse
I would trash that download and download a new zip then try it again. Sounds like u r doing it right
hahaha if anything i'm persistent. I actually redownloaded. I tried with the 5.2.0 before and had the same issue so thought maybe i'd have better luck with the 5.2.2
It seems that i'm having trouble getting to 5.2.x
maybe just wait for 5.2.3 but it seems that i'm having problems getting to teh 5.2.x version
Thank you Jess086
happyshirt said:
hahaha if anything i'm persistent. I actually redownloaded. I tried with the 5.2.0 before and had the same issue so thought maybe i'd have better luck with the 5.2.2
It seems that i'm having trouble getting to 5.2.x
maybe just wait for 5.2.3 but it seems that i'm having problems getting to teh 5.2.x version
Thank you Jess086
Click to expand...
Click to collapse
that sucks man. it should be easy
happyshirt said:
hahaha if anything i'm persistent. I actually redownloaded. I tried with the 5.2.0 before and had the same issue so thought maybe i'd have better luck with the 5.2.2
It seems that i'm having trouble getting to 5.2.x
maybe just wait for 5.2.3 but it seems that i'm having problems getting to teh 5.2.x version
Thank you Jess086
Click to expand...
Click to collapse
what recovery r u using?
try either to flash the new ext4 recovery first then the rom or if u have the ext4 recovery try to flash back to old one first and then flash rom
jess086 said:
try either to flash the new ext4 recovery first then the rom or if u have the ext4 recovery try to flash back to old one first and then flash rom
Click to expand...
Click to collapse
now i'm lost. my knowledge doesn't go that far. I'm using CWM recovery i think. and to get to 5.1.7 had to do the ext4...i THINK.
would you so kind as to explain in more detail the steps u've described? How to flash back the old one?
Thanks so much.
happyshirt said:
now i'm lost. my knowledge doesn't go that far. I'm using CWM recovery i think. and to get to 5.1.7 had to do the ext4...i THINK.
would you so kind as to explain in more detail the steps u've described? How to flash back the old one?
Thanks so much.
Click to expand...
Click to collapse
Don't worry about the old one. Get the new ext4 recovery out of the dev. Section. Will be one of the top threads. Flash it. Then boot to recovery and go to where it says wipe and wipe the catch, dev catch, and the factory wipe u already did. Then flash the wipe download for ext4 when its done it will say u can now flash the arhd Rom so go to install fro SD card and fond Rom zip and flash it then reboot. U will be good hopefully. Keep me posted
Do you mean this one? Is it different from the Super Wipe from the ARHD pg?
ClockWorkMod 2 & 3 - ( Edify Script )
FULL_WIPE_1.5_EXT4_
This patch can be applied prior to flashing the ROM, please note, this zip will wipe your device and format all partitions to EXT4.
jess086. i finally got enought posts to post in the aRHD thread and the solution it to flash the 1ghz patch after flashing the ROM and that seems to have done the job.
Thank you.
happyshirt said:
jess086. i finally got enought posts to post in the aRHD thread and the solution it to flash the 1ghz patch after flashing the ROM and that seems to have done the job.
Thank you.
Click to expand...
Click to collapse
thx for letting me know, wish i could of helped more bro
Hello,
I just installed the CM10.2 ROM on my SGH-T989 T-Mobile Galaxy S2 after having installed the Slim Bean (I think it's called), Jedi MindTrick, and AOKP so I already have the idea on how to boot a new rom already kinda experienced but I was gonna flash Gapps after installing CM10.2 and when I was gonna go into recovery it just didn't wanna boot up! I have very, very, important stuff including pictures, videos, and school projects so i would be very grateful to anyone that would please help me! At the moment, it's looping on the Samsung logo...
Just in case this helps I'm putting it in (but u already know this stuff anyways)
* CM10.2 made it so I have my own custom start up screen
* It also implemented its own charging battery icon when it's turned off
I really don't know if any of these features have anything to do with it but if someone could hand me like an updated/custom odin for that specific rom it would be great!
I have tried following the instructions given by techfanatic9 at YouTube indicating to go to download mode via USB, launch odin, and then use a .tar file called recovery-cwm-hercule but when it's done it just passes the Samsung logo and stays black.
If you need any more info I would gladly give out any!
BTW, I did wipe data/cache before installing the ROM those are the basics anyways
xPixelated said:
Hello,
I just installed the CM10.2 ROM on my SGH-T989 T-Mobile Galaxy S2 after having installed the Slim Bean (I think it's called), Jedi MindTrick, and AOKP so I already have the idea on how to boot a new rom already kinda experienced but I was gonna flash Gapps after installing CM10.2 and when I was gonna go into recovery it just didn't wanna boot up! I have very, very, important stuff including pictures, videos, and school projects so i would be very grateful to anyone that would please help me! At the moment, it's looping on the Samsung logo...
Just in case this helps I'm putting it in (but u already know this stuff anyways)
* CM10.2 made it so I have my own custom start up screen
* It also implemented its own charging battery icon when it's turned off
I really don't know if any of these features have anything to do with it but if someone could hand me like an updated/custom odin for that specific rom it would be great!
I have tried following the instructions given by techfanatic9 at YouTube indicating to go to download mode via USB, launch odin, and then use a .tar file called recovery-cwm-hercule but when it's done it just passes the Samsung logo and stays black.
If you need any more info I would gladly give out any!
BTW, I did wipe data/cache before installing the ROM those are the basics anyways
Click to expand...
Click to collapse
Hmmmm it doesn't sound hard bricked because it wouldn't start up at all if it nor would it go into download mode, you may have to take a hit on your storage and erase your SD.. can you get into your open recovery? Also as a disclaimer 10.2 is is very early alpha as team chopsticks is still working out their kinks and have said the 10.2 early roms have a likely hood of bricking the phone and messing with partitions.. very important to read thru the thread on very early rom threads.. report back and let me know
gabriel1946 said:
Hmmmm it doesn't sound hard bricked because it wouldn't start up at all if it nor would it go into download mode, you may have to take a hit on your storage and erase your SD.. can you get into your open recovery? Also as a disclaimer 10.2 is is very early alpha as team chopsticks is still working out their kinks and have said the 10.2 early roms have a likely hood of bricking the phone and messing with partitions.. very important to read thru the thread on very early rom threads.. report back and let me know
Click to expand...
Click to collapse
Well, I can boot up the CWM-based Recovery. When I reboot the phone from recovery it gets stuck on the Cyanogenmod loading screen which comes like 3 minutes after the Samsung one I mentiong aboved.
EDIT: Can I flash another rom? Will that fix it? I was thinking on trying Darkside but I'm scared on trying anything...
EDIT#2: I also have Jedi MindTrick backed up as well as AOKP if that helps
xPixelated said:
Well, I can boot up the CWM-based Recovery. When I reboot the phone from recovery it gets stuck on the Cyanogenmod loading screen which comes like 3 minutes after the Samsung one I mentiong aboved.
EDIT: Can I like up another rom? Will that fix it? I was thinking on trying Darkside but I'm scared on trying anything...
EDIT#2: I also have Jedi MindTrick backed up as well as AOKP if that helps!
Click to expand...
Click to collapse
Its cwm recovery I'm 99% sure.. its known for not liking our device try twrp 2.6.. I haven't used cwm in forever but basically wipe everything but your SD cards.. flash over a 4.1.2 based rom.. try rushes shadow rom and boot.. also im not sure if cwm had the capabilities but in recovery hook your computer up to a pc mount your sd and copy files from your phone to your pc.. don't be scared to flash another rom especially sense its probably the reason for you not booting up<<<<--- this reason is why I have so many roms downloaded on my extra SD.. if I get stuck on a rom I wipe everything but my SD like 4 times flash the rom and kernel twice to make sure it sticks ex(flash rom re flash rom,wipe delvic and cache, flash kernel reflash kernel) usually works eveytime
xPixelated said:
Hello,
I just installed the CM10.2 ROM on my SGH-T989 T-Mobile Galaxy S2 after having installed the Slim Bean (I think it's called), Jedi MindTrick, and AOKP so I already have the idea on how to boot a new rom already kinda experienced but I was gonna flash Gapps after installing CM10.2 and when I was gonna go into recovery it just didn't wanna boot up! I have very, very, important stuff including pictures, videos, and school projects so i would be very grateful to anyone that would please help me! At the moment, it's looping on the Samsung logo...
Just in case this helps I'm putting it in (but u already know this stuff anyways)
* CM10.2 made it so I have my own custom start up screen
* It also implemented its own charging battery icon when it's turned off
I really don't know if any of these features have anything to do with it but if someone could hand me like an updated/custom odin for that specific rom it would be great!
I have tried following the instructions given by techfanatic9 at YouTube indicating to go to download mode via USB, launch odin, and then use a .tar file called recovery-cwm-hercule but when it's done it just passes the Samsung logo and stays black.
If you need any more info I would gladly give out any!
BTW, I did wipe data/cache before installing the ROM those are the basics anyways
Click to expand...
Click to collapse
Have you tried to remove the battery at all ? This has helped me in a similar situation. Remove the battery and try getting into CWM again and if that does not work, remove the battery and try getting into download mode. Good Luck.
gabriel1946 said:
Its cwm recovery I'm 99% sure.. its known for not liking our device try twrp 2.6.. I haven't used cwm in forever but basically wipe everything but your SD cards.. flash over a 4.1.2 based rom.. try rushes shadow rom and boot.. also im not sure if cwm had the capabilities but in recovery hook your computer up to a pc mount your sd and copy files from your phone to your pc.. don't be scared to flash another rom especially sense its probably the reason for you not booting up<<<<--- this reason is why I have so many roms downloaded on my extra SD.. if I get stuck on a rom I wipe everything but my SD like 4 times flash the rom and kernel twice to make sure it sticks ex(flash rom re flash rom,wipe delvic and cache, flash kernel reflash kernel) usually works eveytime
Click to expand...
Click to collapse
The only roms I have on my internal SD is AOKP (4.2.2) and JediMindTrick (4.1.2) would either one be good to flash?
Sorry I'm asking so many questions lol! I'm just kinda nervous but I'm really glad you replied.
xPixelated said:
The only roms I have on my internal SD is AOKP (4.2.2) and JediMindTrick (4.1.2) would either one be good to flash?
Sorry I'm asking so many questions lol! I'm just kinda nervous but I'm really glad you replied.
Click to expand...
Click to collapse
For sure I know how it is to feel like u bricked your device.. Jedi is good to flash just do your usual wipes and flash the rom let me know if it works ill be up for a while so keep me posted
---------- Post added at 12:31 AM ---------- Previous post was at 12:29 AM ----------
Also when u did a Odin flash did u flash 10.2 over it? Or did odin not work than u flashed 10.2? Odin should've fixed it for you
[Solved]
gabriel1946 said:
For sure I know how it is to feel like u bricked your device.. Jedi is good to flash just do your usual wipes and flash the rom let me know if it works ill be up for a while so keep me posted
Click to expand...
Click to collapse
Your advice worked great Gabriel!! I think your doing a wondrous thing sticking by and helping peeps like me.
Thank you so much! C:
EDIT: Regarding the Odin thing, it didn't fix it I don't know why. I ran it but when I booted my phone up it kept freezing on Samsung and when I pluggen it in it showed the CM10.2 charging screen.
xPixelated said:
Your advice worked great Gabriel!! I think your doing a wondrous thing sticking by and helping peeps like me.
Thank you so much!
Click to expand...
Click to collapse
Right on try staying away from 4.3 roms til chopsticks gets the kinks out.. also consider switching to twrp 2.6 much user friendly and recommended by most.. u may wanna change the op to **solved** so others can review, and dont forget to hit that thanks button :good::victory:
gabriel1946 said:
Right on try staying away from 4.3 roms til chopsticks gets the kinks out.. also consider switching to twrp 2.6 much user friendly and recommended by most.. u may wanna change the op to **solved** so others can review, and dont forget to hit that thanks button :good::victory:
Click to expand...
Click to collapse
Yeah I think I'll stick with AOKP for a while maybe until CM10.2 makes a stable release. And yeah I spammed that Thanks button like crazy! xD
Thanks again Gabriel!
Hello,
I can not flash any ROM to my GT-P5210 Tab anymore.
I was on BinDroid ONE P5210 LITE V3.0.0, but since it is discontinued
and 2 other ROMs rolled out over the past days I wanted to give it a try.
- went back to stock with official firmware from "sammobile" for my device,
- flashed TWRP with Odin 3.07
- flashed ROOT with Odin
- went to recovery did factory reset + dalvik/cache (
- flashed new ROM (neither ROM Pimpdroid or Grievous is working)
after flashing Tab goes into a bootloop to recovery. First boot after flash takes some time in the Galaxy Tab3 Logo but in the end it reboots into TWRP. I have tried CWM too with the same results.
I am not totaly new to flashing, did it with my I9000 and now with my I9300 int. but with this Tab3 now I am lost.
Any ideas are much appreciated.
regards and sorry for my english its not my native tongue
zerodv8 said:
Hello,
I can not flash any ROM to my GT-P5210 Tab anymore.
I was on BinDroid ONE P5210 LITE V3.0.0, but since it is discontinued
and 2 other ROMs rolled out over the past days I wanted to give it a try.
- went back to stock with official firmware from "sammobile" for my device,
- flashed TWRP with Odin 3.07
- flashed ROOT with Odin
- went to recovery did factory reset + dalvik/cache (
- flashed new ROM (neither ROM Pimpdroid or Grievous is working)
after flashing Tab goes into a bootloop to recovery. First boot after flash takes some time in the Galaxy Tab3 Logo but in the end it reboots into TWRP. I have tried CWM too with the same results.
I am not totaly new to flashing, did it with my I9000 and now with my I9300 int. but with this Tab3 now I am lost.
Any ideas are much appreciated.
regards and sorry for my english its not my native tongue
Click to expand...
Click to collapse
did u try root check app to c if u r truly rooted? is ur su updated? if so try reflashing the recovery...n the root file. do u have the stock kernel?
THink I Got a fix
This worked for me. The TWRP does NOT actually wipe anything. go to settings in whatever rom you are running, and do a factory data reset from there. Let it wipe all app data and EVERYTHING. Then go through the steps to install whichever ROM you want. It worked for me!! Post back and let me know if it worked for you too. I tried for 3 days to install anything, and this is the only thing that worked.:victory:
Tquarter said:
This worked for me. The TWRP does NOT actually wipe anything. go to settings in whatever rom you are running, and do a factory data reset from there. Let it wipe all app data and EVERYTHING. Then go through the steps to install whichever ROM you want. It worked for me!! Post back and let me know if it worked for you too. I tried for 3 days to install anything, and this is the only thing that worked.:victory:
Click to expand...
Click to collapse
ok did read your post before trying to flash. i lost my back up and as well as my emmc. so i need a stock firmware only problem I now have is downloading one. Three quarter of links r dead and the three i have tried have had errors. Can you help me anyone with a google drive or box download of an unknown region stock firmware so I can breathe light in t o my brick please
https://db.tt/63atdfRZ Here ya go!
I'm uploading a stock firmware that can be flashed using ODEN. I have not tried this file, I just downloaded it, before I flashed anything, in case something went wrong. I'll post the link when it finishes uploading. Good luck! Post back and let us know how it went.
solved
Tquarter said:
This worked for me. The TWRP does NOT actually wipe anything. go to settings in whatever rom you are running, and do a factory data reset from there. Let it wipe all app data and EVERYTHING. Then go through the steps to install whichever ROM you want. It worked for me!! Post back and let me know if it worked for you too. I tried for 3 days to install anything, and this is the only thing that worked.:victory:
Click to expand...
Click to collapse
I tried your method and it worked. Another thing that works is first thing when you enter TWRP check if system is mounted, if not tick mount and then wipe the way installation of the rom suggests. This worked for me too. Thanks for ur time and the fish
Oh cool, I'm glad to help. I also tried to manually mount system, but untill I got that first ROM installed, it just un-mounted itself again. I hope these problems will be sorted out. Both recoveries act choked down somehow. (TERP, CWM) Looks like "source manifest CM 10.2 "thread is making exciting progress. I can't stop watching it. Most of it is over my head, but google helps me, in trying to grasp what they are saying.
Tquarter said:
Oh cool, I'm glad to help. I also tried to manually mount system, but untill I got that first ROM installed, it just un-mounted itself again. I hope these problems will be sorted out. Both recoveries act choked down somehow. (TERP, CWM) Looks like "source manifest CM 10.2 "thread is making exciting progress. I can't stop watching it. Most of it is over my head, but google helps me, in trying to grasp what they are saying.
Click to expand...
Click to collapse
can someone recommend a clean rom for gt-p5210
Hello. I tried to root my Samsung Galaxy Tab 3 - T210 and i think i really screwed it up. I did not make any backup, that was mistake NR one.
I got clock work mode up and running but i cant install any ROM, have tried The original Firmware, RocketTab, Cyanogenmod and cant pass the installation process and i think i cant turn back cause i got no backup and no way to install it again.
When i run any of these ROMs i get this error :
format() expects 4 args, got 5
Click to expand...
Click to collapse
No matter what i do, im a a bit scared know cause i think i am really close on destroying the tablet.
Can any one help me ? give me tips ?
CWM that i am running is : T210_CWM.6.0.4.7.recovery that i downloaded frome the XDA forum.
A,
panic solves nothing.
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/
when in doubt choose the most recent. zip or tar for odin.
for a rom i suggest svelte to get things straight.
then go from there.
m
1
Thank you for a quick answer, so i should change out CWM for Philz Touch ?
What is "Svelte" ? have no clue what that means.
What to have 110% solid answer before i go wreck some thing more.
Ah, of course.
Audriuss95 said:
Thank you for a quick answer, so i should change out CWM for Philz Touch ?
What is "Svelte" ? have no clue what that means.
What to have 110% solid answer before i go wreck some thing more.
Click to expand...
Click to collapse
I hear you, okay,
svelte rom thread - http://forum.xda-developers.com/showthread.php?t=2722582
great rom, minimal issues. philz advanced recovery is cwm with a good touch interface and more and very helpful options.
So yes, switch. All else is almost always solveable as long as your recovery is solid.
m
1
moonbutt74 said:
A,
panic solves nothing.
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/
when in doubt choose the most recent. zip or tar for odin.
for a rom i suggest svelte to get things straight.
then go from there.
m
Click to expand...
Click to collapse
moonbutt74 said:
I hear you, okay,
svelte rom thread - http://forum.xda-developers.com/showthread.php?t=2722582
great rom, minimal issues. philz advanced recovery is cwm with a good touch interface and more and very helpful options.
So yes, switch. All else is almost always solveable as long as your recovery is solid.
m
Click to expand...
Click to collapse
To be 100% sure when people say recovery they mean the programs like CWM or TeamWin and so on right ?
Is it bad for the device to change often the recovery software ? cause i have done that couple of times, started with TeamWin and later on ended up with CWM.
But the thing is that the problem is the installation process, it does not matter what ROM i use i get still the same error.
And for the Philz Touch could you copy the name of the link that i should download, they all look the same and way more links that i am used to.
Audriuss95 said:
To be 100% sure when people say recovery they mean the programs like CWM or TeamWin and so on right ?
Is it bad for the device to change often the recovery software ? cause i have done that couple of times, started with TeamWin and later on ended up with CWM.
But the thing is that the problem is the installation process, it does not matter what ROM i use i get still the same error.
And for the Philz Touch could you copy the name of the link that i should download, they all look the same and way more links that i am used to.
Click to expand...
Click to collapse
The reason you can't install any rom is because you do not have the latest version of CWM installed. You should always install the newest version when you install any recovery.
The newer roms are using an updater-script that will not work on CWM 6.0.4.7. Install an updated recovery and then install the rom that you want.
Sent from my SM-T310 using Tapatalk
Audriuss95,
Is it bad for the device to change often the recovery software ? cause i have done that couple of times, started with TeamWin and later on ended up with CWM.
To answer your question no yes maybe. Travel around through XDA and read/learn and you will understand.
as for philz i would try this one https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/philz_touch_6.44.9-lt02wifi.zip
in general find a recovery that works for you and stick with it until an update is actually called for.
m
If I were you, I would unroot and return to stock using ODIN first before I try anything else. If you need instructions, Google "unroot and return to stock using ODIN".
1
gr8nole said:
The reason you can't install any rom is because you do not have the latest version of CWM installed. You should always install the newest version when you install any recovery.
The newer roms are using an updater-script that will not work on CWM 6.0.4.7. Install an updated recovery and then install the rom that you want.
Sent from my SM-T310 using Tapatalk
Click to expand...
Click to collapse
What is then the newest version that i can use on this device ? could you maybe throw a link at me ?
moonbutt74 said:
Audriuss95,
Is it bad for the device to change often the recovery software ? cause i have done that couple of times, started with TeamWin and later on ended up with CWM.
To answer your question no yes maybe. Travel around through XDA and read/learn and you will understand.
as for philz i would try this one
in general find a recovery that works for you and stick with it until an update is actually called for.
m
Click to expand...
Click to collapse
Thank you for the answear. gone try a little bit more with the recovery i already have and update it like gr8nole said. Maybe that could be my big problem.
ikeny said:
If I were you, I would unroot and return to stock using ODIN first before I try anything else. If you need instructions, Google "unroot and return to stock using ODIN".
Click to expand...
Click to collapse
Yeah i have thought of that but the thing is i never took a backup so i cant go back atleast from what i read on google.
Audriuss95 said:
Yeah i have thought of that but the thing is i never took a backup so i cant go back atleast from what i read on google.
Click to expand...
Click to collapse
Without a backup, you will lose your data and files. But you can restore, since you can download the firmware from SamMobile.
Audriuss95 said:
What is then the newest version that i can use on this device ? could you maybe throw a link at me ?
Click to expand...
Click to collapse
6.0.4.9 is the latest.
http://www.androidfilehost.com/?w=files&flid=12949
Choose the one with "flashable" in the name and then flash it using your current CWM recovery; then reboot recovery.
1
ikeny said:
Without a backup, you will lose your data and files. But you can restore, since you can download the firmware from SamMobile.
Click to expand...
Click to collapse
I downloaded the FirmWare from SamMobile still get an error. the one that a wrote above.
gr8nole said:
6.0.4.9 is the latest.
Choose the one with "flashable" in the name and then flash it using your current CWM recovery; then reboot recovery.
Click to expand...
Click to collapse
Ok i am going to try out that file.
I use that flashable file like i would install ROM ? right but it on SD card and not use ODIN or ?
1
I updated to to the newest CMW tried the CM mod and got an error but it only said "Installation Aborted" the i tried to install the RocketTab 3.1 and it worked. I downloaded it from the this thread [ROM][SM-T210/T210R][Jan 30] RocketTab v3.1 Lite / Full / MODs
But i would rather like to have CM what can do ?
hey
Audriuss95 said:
I updated to to the newest CMW tried the CM mod and got an error but it only said "Installation Aborted" the i tried to install the RocketTab 3.1 and it worked. I downloaded it from the this thread [ROM][SM-T210/T210R][Jan 30] RocketTab v3.1 Lite / Full / MODs
But i would rather like to have CM what can do ?
Click to expand...
Click to collapse
good to hear you got it sorted. CM just isn't happening yet. just watch the forum like a hawk like everyone else is...:cyclops:
If your worried about destroying your tab you prolly shouldn't have come to mod it.I know sounds like a douche bag thing to say but even putting on the flash or roms that go with the tab can destroy your tab if done improperly or even if they glitched while flash which does happen or even worse power outage when flashing.
1
moonbutt74 said:
good to hear you got it sorted. CM just isn't happening yet. just watch the forum like a hawk like everyone else is...:cyclops:
Click to expand...
Click to collapse
So i should put the CM mod aside ?
piercejpierce said:
If your worried about destroying your tab you prolly shouldn't have come to mod it.I know sounds like a douche bag thing to say but even putting on the flash or roms that go with the tab can destroy your tab if done improperly or even if they glitched while flash which does happen or even worse power outage when flashing.
Click to expand...
Click to collapse
Nono it is okey to say something like this, but the thing is i like to learn this stuff, took me about 3 days to learn how to flash a BIOS on a computer but when i got the hang of it i learned it.
I am scared of destroying the tablet but how else would i learn ? cause reading does not always help But i got it back up again. And i knew when to ask for help.
But the RocketTab looks to work well at least for know, but would love CM mod couse i have it on my S4 and when and with the RocketTab i only get android version 4.1.2
1
Thank you for the fast help, the tablet is up and running, gone skip for know trying to use CM mod.
Just a word to say that my E980 got softbricked just after flashing the new [20140920]VUPMP.GPRO.sG3.Stable from datphu2811 ROM .
I did not restore stock rom before flashing. I came from CM 10.2, did wipe every cache and flashed from CWM recovery.
I am trying to recover using these steps now.
Thank you
pzkfwg said:
Just a word to say that my E980 got softbricked just after flashing the new [20140920]VUPMP.GPRO.sG3.Stable from datphu2811 ROM .
I did not restore stock rom before flashing. I came from CM 10.2, did wipe every cache and flashed from CWM recovery.
I am trying to recover using these steps now.
Thank you
Click to expand...
Click to collapse
Follow each step by it's directions and it will get you back for sure. I've softbricked a few times myself and that method got me up and back on my feet again.
If you need any help you are welcome to ask.
Snepsts said:
Follow each step by it's directions and it will get you back for sure. I've softbricked a few times myself and that method got me up and back on my feet again.
If you need any help you are welcome to ask.
Click to expand...
Click to collapse
Thank you for your support. I managed to restore stock ROM. Back to the basics of rooting again
pzkfwg said:
Thank you for your support. I managed to restore stock ROM. Back to the basics of rooting again
Click to expand...
Click to collapse
Good stuff! If you're in the business of stock ROMs I suggest Bountyman's G3 port, it's really nice if you can get the darn thing to deep sleep. Otherwise if you're looking at CM11 ROMs, Beanstalk, PAC, and Gummy are great choices. Along with the E980 Kernel+
Snepsts said:
Good stuff! If you're in the business of stock ROMs I suggest Bountyman's G3 port, it's really nice if you can get the darn thing to deep sleep. Otherwise if you're looking at CM11 ROMs, Beanstalk, PAC, and Gummy are great choices. Along with the E980 Kernel+
Click to expand...
Click to collapse
Thanks for the tips. I am looking for the most stable ROM, but yet recent enough. I have been happy with CM 10.2 for 6 months or so, but now I am starting to get problems (battery "leaks", power button not always responding) so I figured that I would check on the latest. I will try the G3 ports as they may be better adapted to the hardware capabilities of the G Pro (e.g.: Quick memo button).
I have seen my error by reading the later posts with the ROM that soft bricked my phone. I needed to select Phil's recovery instead of keeping mine during installation. I'll give another try.
I flashed a couple of ROMs in the past and have become too comfortable. I had no idea that I could brick a phone and yet recover it! Thanks engineers of the world for that last line of defense!
EDIT: Even with Philz recovery and going from the stock ROM, I always soft-brick my phone with datphu2811's ROM. I'll try Bountyman now.
pzkfwg said:
Thanks for the tips. I am looking for the most stable ROM, but yet recent enough. I have been happy with CM 10.2 for 6 months or so, but now I am starting to get problems (battery "leaks", power button not always responding) so I figured that I would check on the latest. I will try the G3 ports as they may be better adapted to the hardware capabilities of the G Pro (e.g.: Quick memo button).
I have seen my error by reading the later posts with the ROM that soft bricked my phone. I needed to select Phil's recovery instead of keeping mine during installation. I'll give another try.
I flashed a couple of ROMs in the past and have become too comfortable. I had no idea that I could brick a phone and yet recover it! Thanks engineers of the world for that last line of defense!
EDIT: Even with Philz recovery and going from the stock ROM, I always soft-brick my phone with datphu2811's ROM. I'll try Bountyman now.
Click to expand...
Click to collapse
Philz has constant softbrick issues with me. I use mack's hacked TWRP with Loki support. Have you tried that yet?
Snepsts said:
Philz has constant softbrick issues with me. I use mack's hacked TWRP with Loki support. Have you tried that yet?
Click to expand...
Click to collapse
I managed to install TWRP instead and install the ROM (Bounty's) but got other problems with LG's logo screen stuck. Finally, I also got it solved by flashing this modem instead of this one. Both were put in the instructions.
This is by far the most difficult rom installation I have ever made, and I installed quite a few in the past!
pzkfwg said:
I managed to install TWRP instead and install the ROM (Bounty's) but got other problems with LG's logo screen stuck. Finally, I also got it solved by flashing this modem instead of this one. Both were put in the instructions.
This is by far the most difficult rom installation I have ever made, and I installed quite a few in the past!
Click to expand...
Click to collapse
Yeah the G3 ROM doesn't like to boot without Mack's kernel, and the modem is nice with deep sleep.
Just a question, what ROMs have you flashed in the past?