Develop Bugs

dev please delete thanks

Guide and tutorial Moved
http://forum.xda-developers.com/showthread.php?t=1074700​

Moved to a new link

Ohh interesting!

hope so ive got a few more to do just taking me time makin sure i get thing write first time
it looks a bit shabby but ill play around with it later

Thank you very very much !

Might wanna change it to guide, not quide

thanks very much, this helped me 100%

EddyOS said:
Might wanna change it to guide, not quide
Click to expand...
Click to collapse
lol good point lol thought it look weird lol
i really have gota rescale the pics there massive

Hi, used the first guide now I'm stuck at recovery. Every time I reboot it goes straight to recovery. Any ideas?

lepszy said:
Hi, used the first guide now I'm stuck at recovery. Every time I reboot it goes straight to recovery. Any ideas?
Click to expand...
Click to collapse
if ur stuck at recovery and cant get the device to boot
u need to flash the a new rom the cm7 version the stock version will not work

ok will try that. Thanks!
Edit. It worked. Thanks again.

nice guide!!!!!!

Thanks, your guide is helped me, after stuck with bootloop I have instaled RCMixS_v1.0_A2SD+_BravoHboot.zip.
My favorite ROM

Thanks it was to help releave Robo with over welving question
I'll keep updating the guide to make it simpler for every one
Sent from my HTC Desire using XDA App

Hey,
I flashed the CM7 with fastboot.
But after wiping and reflashing the v.1.0 ++ version, I am still suffering from the constant boot loop, because the dalvikvm cannot start.
I've searched the original thread, but I can't find any solution for my problem.
Edit:
I just tried again, and logged into a shell. Looking into the sd-ext folder, it shows me the content of my fat32 partition.
So this is my problem, but I don't understand why this occured?
RA Recovery finds my ext3 partion without problems.
I have the following layout:
Fat32 13gb
Ext3 2,3gb

Wen u flash cm7 hboot u need to flash the cm7 Rom version of rcmix
Buddy that's y ur boot looping
Cm7 hboot want work with ++version hope this helps
Sent from my HTC Desire using XDA App

daddyspud said:
Wen u flash cm7 hboot u need to flash the cm7 Rom version of rcmix
Buddy that's y ur boot looping
Cm7 hboot want work with ++version hope this helps
Click to expand...
Click to collapse
Okay, I did flash the following version of the rom:
RCMixS_v1.0_++_CM7Hboot.zip
I thought that was the actual CM7 rom version?

Yes it is hmmm ok
Can u provide as much info on wat u done etc n ill do the best to point u in the right way
The Best Things Come To Those Who Wait

I always get stuck on the why so serious screen and adb shows that the dalvikvm is unable to start up.
I use Amon Ra 2.0.1 and tried alpharev cm7 with ++ version and alpharev bravo stock with a2sd version.
Bot version show the same result.
Flash works without errors.
I did everytime a FULL wipe.
I have tried CWM 2.5 aswell. Same result.
Even tried to repartition the sd card.
sd-ext is at 2,3 GB at the moment, so that should be much more than needed.

ok i now ur issue know
try this recovery
go into ur current recovery and look for update zip and flash the update zip i gave u it will give cwm 3.*** it works a charm for me

flashing error

i didnt see anyone having this problem but got my gn and unlocked it yest, i came fr evo3d and we used to wiping everything n cache n dalvik so i tried to flash my first rom and im getting error " error in /sdcard/toro_aokp_b8.zip(status7) installation aborted assert failed:getprop(ro.product.device==toroII
i thought it was that rom but i tried flashing another rom and getting same message , if someone can help i appreciate it, i came fr the evo3d left sprint after 11yrs and woow what a difference in network, awesome network but im spoiled with rooting my ogevo n evo3d lol i love this phone hope i can fix this issue

Could you let us know what roms you've tried and the exact process you used please. Also are you using CWM?

RTContent said:
Could you let us know what roms you've tried and the exact process you used please. Also are you using CWM?
Click to expand...
Click to collapse
k first rom i tried AOSP 4.0.3ANDROID OPEN KANG PROJECT-TORO BUILD8 so i wiped data factory reset and cache n dalvik and flashed the rom, it looks like it starts to flash but aborts with the message above, then i restored my nan backup rebooted and went back to cwm to reflash the second time around i only wipe data factory reset cuz thats what the op says to do on his thread so i only wipe data factory n flash the rom still same error, so i went to try another rom GUMMYNEX 0.2.3 and i did the same process with both im following the steps their stating in the op in have cwm

From what the error sounds like is that it doesn't think you have the correct device. You have a CDMA phone and not a GSM?

RTContent said:
From what the error sounds like is that it doesn't think you have the correct device. You have a CDMA phone and not a GSM?
Click to expand...
Click to collapse
ui
yup, i got it fr verizon cdma, im starting to stress man, ive been so used the rooting world n having custom roms i dont know how i could do without it lol, i hope i can get this issue resolve

Flip35 said:
ui
yup, i got it fr verizon cdma, im starting to stress man, ive been so used the rooting world n having custom roms i dont know how i could do without it lol, i hope i can get this issue resolve
Click to expand...
Click to collapse
sure you are using the lastest CWM???
sure you are rooted??
did you try downloading the files from another puter??

i think i might know what the problem is my cwm says 5.5.0.2 and im looking here at somebody posted in the development section for a cdma cwm and it says 5.5.0.4 could that be the problem? if so how do i redo my recovery, follow the same steps i did my first one, i downloaded and extracted the files to my c drive and opened cmd and typed the commands, can i do that again while having already cwm to flash the new cwm on top of the old one? if thats the problem

Download rom manager. Then you can flash it while your booted in android.

RTContent said:
Download rom manager. Then you can flash it while your booted in android.
Click to expand...
Click to collapse
how ive never flashed cwm using rom manager, u meand download the file of cwm5.5.0.4 putting in the root like i do any rom and go into rom manager and install?

No just download the app Rom Manager. It will download the latest version and flash it with a single click within this app!

RTContent said:
Download rom manager. Then you can flash it while your booted in android.
Click to expand...
Click to collapse
wooooord, aight RTcontent good looking out, i guess when u said it looks like it sound it was reading my phone wrong was right, i had a gms cwm, thanx man used rom manager and since i put the new cwm in my root of sdcard when i press install cwm it automatically update it without even booting into recovery but just finished intalling a rom and IT WORKED!!!! UR DA MAN im excited thanx

HELP needed.

Hi guys I'm having big issues here, I've flashed 100s of rom's before no problem I'm no noob when it comes to flashing and useing recovery. I was using PA 4.4 and decided to give CM 11 a go. After flashing it worked fine but this morning I couldn't unlock the phone by pressing the unlock or home button. I booted Into TwRP and thought I would go back to PA 4.4. However every time I try to do a factory reset the phone reboots. I can wipe /system ok but anything else causes the same rebooting issue. I have the zips for CMW, TWRP and Philz I can flash them fine but they all cause the same issue.
Any help would be hugely appectaed.

Kombat wombat said:
Hi guys I'm having big issues here, I've flashed 100s of rom's before no problem I'm no noob when it comes to flashing and useing recovery. I was using PA 4.4 and decided to give CM 11 a go. After flashing it worked fine but this morning I couldn't unlock the phone by pressing the unlock or home button. I booted Into TwRP and thought I would go back to PA 4.4. However every time I try to do a factory reset the phone reboots. I can wipe /system ok but anything else causes the same rebooting issue. I have the zips for CMW, TWRP and Philz I can flash them fine but they all cause the same issue.
Any help would be hugely appectaed.
Click to expand...
Click to collapse
well use philz and flash the super wipe script found in phoenix rom extra downloads , it will wipe everything if it succeeds then flash the rom u want and see if it solves if not try with a backup if u have any.
if all fails odin is the way to come back flashing stock

shhbz said:
well use philz and flash the super wipe script found in phoenix rom extra downloads , it will wipe everything if it succeeds then flash the rom u want and see if it solves if not try with a backup if u have any.
if all fails odin is the way to come back flashing stock
Click to expand...
Click to collapse
Thank you for the reply, I'm not sure where to find the script, I've tired a full wipe via aroma installer with the same issue. I don't have any backup looks like it will have to be Odin with stock rom when I get home.

Kombat wombat said:
Thank you for the reply, I'm not sure where to find the script, I've tired a full wipe via aroma installer with the same issue. I don't have any backup looks like it will have to be Odin with stock rom when I get home.
Click to expand...
Click to collapse
here s he script http://d-h.st/fWr

shhbz said:
here s he script http://d-h.st/fWr
Click to expand...
Click to collapse
Legend mate I'll give it ago when I get to a PC

shhbz said:
here s he script http://d-h.st/fWr
Click to expand...
Click to collapse
Still no joy I flashed stock via Odin and all that happens is it stays on the samsung screen ..

Kombat wombat said:
Still no joy I flashed stock via Odin and all that happens is it stays on the samsung screen ..
Click to expand...
Click to collapse
Just boot into stock recovery and wipe data and reboot if not then flash custom recovery through odin and wipe data,cache,dalvik and reboot

[Q] I am destroying my tablet - Can some one help me ?

Hello. I tried to root my Samsung Galaxy Tab 3 - T210 and i think i really screwed it up. I did not make any backup, that was mistake NR one.
I got clock work mode up and running but i cant install any ROM, have tried The original Firmware, RocketTab, Cyanogenmod and cant pass the installation process and i think i cant turn back cause i got no backup and no way to install it again.
When i run any of these ROMs i get this error :
format() expects 4 args, got 5
Click to expand...
Click to collapse
No matter what i do, im a a bit scared know cause i think i am really close on destroying the tablet.
Can any one help me ? give me tips ?
CWM that i am running is : T210_CWM.6.0.4.7.recovery that i downloaded frome the XDA forum.

A,
panic solves nothing.
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/
when in doubt choose the most recent. zip or tar for odin.
for a rom i suggest svelte to get things straight.
then go from there.
m

1
Thank you for a quick answer, so i should change out CWM for Philz Touch ?
What is "Svelte" ? have no clue what that means.
What to have 110% solid answer before i go wreck some thing more.

Ah, of course.
Audriuss95 said:
Thank you for a quick answer, so i should change out CWM for Philz Touch ?
What is "Svelte" ? have no clue what that means.
What to have 110% solid answer before i go wreck some thing more.
Click to expand...
Click to collapse
I hear you, okay,
svelte rom thread - http://forum.xda-developers.com/showthread.php?t=2722582
great rom, minimal issues. philz advanced recovery is cwm with a good touch interface and more and very helpful options.
So yes, switch. All else is almost always solveable as long as your recovery is solid.
m

1
moonbutt74 said:
A,
panic solves nothing.
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/
when in doubt choose the most recent. zip or tar for odin.
for a rom i suggest svelte to get things straight.
then go from there.
m
Click to expand...
Click to collapse
moonbutt74 said:
I hear you, okay,
svelte rom thread - http://forum.xda-developers.com/showthread.php?t=2722582
great rom, minimal issues. philz advanced recovery is cwm with a good touch interface and more and very helpful options.
So yes, switch. All else is almost always solveable as long as your recovery is solid.
m
Click to expand...
Click to collapse
To be 100% sure when people say recovery they mean the programs like CWM or TeamWin and so on right ?
Is it bad for the device to change often the recovery software ? cause i have done that couple of times, started with TeamWin and later on ended up with CWM.
But the thing is that the problem is the installation process, it does not matter what ROM i use i get still the same error.
And for the Philz Touch could you copy the name of the link that i should download, they all look the same and way more links that i am used to.

Audriuss95 said:
To be 100% sure when people say recovery they mean the programs like CWM or TeamWin and so on right ?
Is it bad for the device to change often the recovery software ? cause i have done that couple of times, started with TeamWin and later on ended up with CWM.
But the thing is that the problem is the installation process, it does not matter what ROM i use i get still the same error.
And for the Philz Touch could you copy the name of the link that i should download, they all look the same and way more links that i am used to.
Click to expand...
Click to collapse
The reason you can't install any rom is because you do not have the latest version of CWM installed. You should always install the newest version when you install any recovery.
The newer roms are using an updater-script that will not work on CWM 6.0.4.7. Install an updated recovery and then install the rom that you want.
Sent from my SM-T310 using Tapatalk

Audriuss95,
Is it bad for the device to change often the recovery software ? cause i have done that couple of times, started with TeamWin and later on ended up with CWM.
To answer your question no yes maybe. Travel around through XDA and read/learn and you will understand.
as for philz i would try this one https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/philz_touch_6.44.9-lt02wifi.zip
in general find a recovery that works for you and stick with it until an update is actually called for.
m

If I were you, I would unroot and return to stock using ODIN first before I try anything else. If you need instructions, Google "unroot and return to stock using ODIN".

1
gr8nole said:
The reason you can't install any rom is because you do not have the latest version of CWM installed. You should always install the newest version when you install any recovery.
The newer roms are using an updater-script that will not work on CWM 6.0.4.7. Install an updated recovery and then install the rom that you want.
Sent from my SM-T310 using Tapatalk
Click to expand...
Click to collapse
What is then the newest version that i can use on this device ? could you maybe throw a link at me ?
moonbutt74 said:
Audriuss95,
Is it bad for the device to change often the recovery software ? cause i have done that couple of times, started with TeamWin and later on ended up with CWM.
To answer your question no yes maybe. Travel around through XDA and read/learn and you will understand.
as for philz i would try this one
in general find a recovery that works for you and stick with it until an update is actually called for.
m
Click to expand...
Click to collapse
Thank you for the answear. gone try a little bit more with the recovery i already have and update it like gr8nole said. Maybe that could be my big problem.
ikeny said:
If I were you, I would unroot and return to stock using ODIN first before I try anything else. If you need instructions, Google "unroot and return to stock using ODIN".
Click to expand...
Click to collapse
Yeah i have thought of that but the thing is i never took a backup so i cant go back atleast from what i read on google.

Audriuss95 said:
Yeah i have thought of that but the thing is i never took a backup so i cant go back atleast from what i read on google.
Click to expand...
Click to collapse
Without a backup, you will lose your data and files. But you can restore, since you can download the firmware from SamMobile.

Audriuss95 said:
What is then the newest version that i can use on this device ? could you maybe throw a link at me ?
Click to expand...
Click to collapse
6.0.4.9 is the latest.
http://www.androidfilehost.com/?w=files&flid=12949
Choose the one with "flashable" in the name and then flash it using your current CWM recovery; then reboot recovery.

1
ikeny said:
Without a backup, you will lose your data and files. But you can restore, since you can download the firmware from SamMobile.
Click to expand...
Click to collapse
I downloaded the FirmWare from SamMobile still get an error. the one that a wrote above.
gr8nole said:
6.0.4.9 is the latest.
Choose the one with "flashable" in the name and then flash it using your current CWM recovery; then reboot recovery.
Click to expand...
Click to collapse
Ok i am going to try out that file.
I use that flashable file like i would install ROM ? right but it on SD card and not use ODIN or ?

1
I updated to to the newest CMW tried the CM mod and got an error but it only said "Installation Aborted" the i tried to install the RocketTab 3.1 and it worked. I downloaded it from the this thread [ROM][SM-T210/T210R][Jan 30] RocketTab v3.1 Lite / Full / MODs
But i would rather like to have CM what can do ?

hey
Audriuss95 said:
I updated to to the newest CMW tried the CM mod and got an error but it only said "Installation Aborted" the i tried to install the RocketTab 3.1 and it worked. I downloaded it from the this thread [ROM][SM-T210/T210R][Jan 30] RocketTab v3.1 Lite / Full / MODs
But i would rather like to have CM what can do ?
Click to expand...
Click to collapse
good to hear you got it sorted. CM just isn't happening yet. just watch the forum like a hawk like everyone else is...:cyclops:

If your worried about destroying your tab you prolly shouldn't have come to mod it.I know sounds like a douche bag thing to say but even putting on the flash or roms that go with the tab can destroy your tab if done improperly or even if they glitched while flash which does happen or even worse power outage when flashing.

1
moonbutt74 said:
good to hear you got it sorted. CM just isn't happening yet. just watch the forum like a hawk like everyone else is...:cyclops:
Click to expand...
Click to collapse
So i should put the CM mod aside ?
piercejpierce said:
If your worried about destroying your tab you prolly shouldn't have come to mod it.I know sounds like a douche bag thing to say but even putting on the flash or roms that go with the tab can destroy your tab if done improperly or even if they glitched while flash which does happen or even worse power outage when flashing.
Click to expand...
Click to collapse
Nono it is okey to say something like this, but the thing is i like to learn this stuff, took me about 3 days to learn how to flash a BIOS on a computer but when i got the hang of it i learned it.
I am scared of destroying the tablet but how else would i learn ? cause reading does not always help But i got it back up again. And i knew when to ask for help.
But the RocketTab looks to work well at least for know, but would love CM mod couse i have it on my S4 and when and with the RocketTab i only get android version 4.1.2

1
Thank you for the fast help, the tablet is up and running, gone skip for know trying to use CM mod.

Stuck at "installing update" Help!

-Hello, I'm new here. This is my first topic so if i did open this at wrong place, forgive me.-
I do flash roms through CWM a lot and i do keep the roms I downloaded as backups in case something happens. Recently I installed Sir Arco's CM12 (5.0.5) rom and I used it for a week. Then when I tried to change my rom to another one, I got stuck at recovery, after wiping cache/data/dalvik cache, saying "installing update..." but not doing anything for nearly 2 hours. FYI, the roms that I'm trying to install are all working (I used them before and they are the same files that I used to install), I even tried the stock rom but that didn't work either. Please help me ;-;
Note: I forgot the most important part! The phone can boot into recovery but there is no firmware installed in it right now since I couldn't install it. You can say it's pretty empty ;-;
If there's some missing info at this post, please ask it, I'm willing give any support I can.

What version did you tried to install? Only the last version of cm11 and cm12 are compatible with the recovery you used to flash cm12. If you want a older version of cm11 or cm10 and so on you need an older recovery. Probably that's your problem

First, I'm sorry for this slow response! Downloading CM11, finding a SD Adapter and etc. took a little bit long. But yeah, it's just as you said. I was trying to flash a 4.0.4 ICS. Flashing CM11 solved all my problems! Thank you so much! :good:

Erinn said:
First, I'm sorry for this slow response! Downloading CM11, finding a SD Adapter and etc. took a little bit long. But yeah, it's just as you said. I was trying to flash a 4.0.4 ICS. Flashing CM11 solved all my problems! Thank you so much! :good:
Click to expand...
Click to collapse
I'm glad I could help . Either way you can flash ICS if you want. You just have to install a older recovery to do it. And also make sure you have the right one

Alright will do! Thanks